Skip to contentSkip to conversation

Kirkwood: Export GPIO indicating jumper setting of JP1

PATCH New Martin Michlmayr 1 participant 1 message May 22, 2010

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Kirkwood: Export GPIO indicating jumper setting of JP1

Export GPIO 45 which is used to indicate the setting of the JP1 jumper. This is useful for userland tools, such as qcontrol, to see whether the LCD or a serial console is connected.

arch/arm/mach-kirkwood/ts41x-setup.c +6 -1
index de49c2d..df8a7e0 100644
@@ -2,7 +2,7 @@
  *
  * QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS Board Setup
  *
- * Copyright (C) 2009  Martin Michlmayr <[email protected]>
+ * Copyright (C) 2009-2010  Martin Michlmayr <[email protected]>
  * Copyright (C) 2008  Byron Bradley <[email protected]>
  *
  * This program is free software; you can redistribute it and/or
@@ -17,6 +17,7 @@
 #include <linux/i2c.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ata_platform.h>
+#include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <asm/mach-types.h>
@@ -26,6 +27,8 @@
 #include "mpp.h"
 #include "tsx1x-common.h"
 
+#define QNAP_TS41X_JUMPER_JP1	45
+
 static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
 	I2C_BOARD_INFO("s35390a", 0x30),
 };
@@ -131,6 +134,8 @@ static void __init qnap_ts41x_init(void)
 
 	pm_power_off = qnap_tsx1x_power_off;
 
+	if (gpio_request(QNAP_TS41X_JUMPER_JP1, "JP1") == 0)
+		gpio_export(QNAP_TS41X_JUMPER_JP1, 0);
 }
 
 static int __init ts41x_pci_init(void)
Signature · 2 lines
Martin Michlmayr
http://www.cyrius.com/