Skip to contentSkip to conversation

mxc_nand: Fix OOB accesses on i.MX27

PATCH New Sascha Hauer 2 participants 2 messages May 28, 2010 – May 31, 2010

Subsystems (3)
lore
Share & tools
lore

Sascha Hauer

author maintainer
#0 lore raw

PATCH 1/1 mxc_nand: Fix OOB accesses on i.MX27

Hi all,

The OOB handling in the mxc_nand driver is broken for v1 type controllers (i.MX27/31) with 512 byte page size. This perhaps did not show up because ubi does not use OOB. Update the driver to always read/write a whole page even if only OOB is requested. With this patch the driver passes the mtd_oobtest on i.MX27 with 512 byte page size. Also tested with 2048 byte page size and on i.MX35 (v2 type controller)

---
 drivers/mtd/nand/mxc_nand.c |   31 +++++--------------------------
 1 files changed, 5 insertions(+), 26 deletions(-)
drivers/mtd/nand/mxc_nand.c +5 -26
index 82e9438..6e8aa34 100644
@@ -623,8 +623,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 		else
 			host->buf_start = column + mtd->writesize;
 
-		if (mtd->writesize > 512)
-			command = NAND_CMD_READ0; /* only READ0 is valid */
+		command = NAND_CMD_READ0; /* only READ0 is valid */
 
 		send_cmd(host, command, false);
 		mxc_do_addr_cycle(mtd, column, page_addr);
@@ -639,31 +638,11 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 		break;
 
 	case NAND_CMD_SEQIN:
-		if (column >= mtd->writesize) {
-			/*
-			 * FIXME: before send SEQIN command for write OOB,
-			 * We must read one page out.
-			 * For K9F1GXX has no READ1 command to set current HW
-			 * pointer to spare area, we must write the whole page
-			 * including OOB together.
-			 */
-			if (mtd->writesize > 512)
-				/* call ourself to read a page */
-				mxc_nand_command(mtd, NAND_CMD_READ0, 0,
-						page_addr);
-
-			host->buf_start = column;
-
-			/* Set program pointer to spare region */
-			if (mtd->writesize == 512)
-				send_cmd(host, NAND_CMD_READOOB, false);
-		} else {
-			host->buf_start = column;
+		if (column >= mtd->writesize)
+			/* call ourself to read a page */
+			mxc_nand_command(mtd, NAND_CMD_READ0, 0, page_addr);
 
-			/* Set program pointer to page start */
-			if (mtd->writesize == 512)
-				send_cmd(host, NAND_CMD_READ0, false);
-		}
+		host->buf_start = column;
 
 		send_cmd(host, command, false);
 		mxc_do_addr_cycle(mtd, column, page_addr);
Signature · 7 lines
1.7.1

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
#1 lore raw

PATCH 1/1 mxc_nand: Fix OOB accesses on i.MX27

Hi Sascha,

Quoted 9 lines · Sascha Hauer

The OOB handling in the mxc_nand driver is broken for v1 type controllers (i.MX27/31) with 512 byte page size. This perhaps did not show up because ubi does not use OOB. Update the driver to always read/write a whole page even if only OOB is requested. With this patch the driver passes the mtd_oobtest on i.MX27 with 512 byte page size. Also tested with 2048 byte page size and on i.MX35 (v2 type controller)

Tested on i.MX25 with 2K page size.

baruch

Quoted 67 lines
---
 drivers/mtd/nand/mxc_nand.c |   31 +++++--------------------------
 1 files changed, 5 insertions(+), 26 deletions(-)
drivers/mtd/nand/mxc_nand.c +5 -26
index 82e9438..6e8aa34 100644
@@ -623,8 +623,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 		else
 			host->buf_start = column + mtd->writesize;
 
-		if (mtd->writesize > 512)
-			command = NAND_CMD_READ0; /* only READ0 is valid */
+		command = NAND_CMD_READ0; /* only READ0 is valid */
 
 		send_cmd(host, command, false);
 		mxc_do_addr_cycle(mtd, column, page_addr);
@@ -639,31 +638,11 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 		break;
 
 	case NAND_CMD_SEQIN:
-		if (column >= mtd->writesize) {
-			/*
-			 * FIXME: before send SEQIN command for write OOB,
-			 * We must read one page out.
-			 * For K9F1GXX has no READ1 command to set current HW
-			 * pointer to spare area, we must write the whole page
-			 * including OOB together.
-			 */
-			if (mtd->writesize > 512)
-				/* call ourself to read a page */
-				mxc_nand_command(mtd, NAND_CMD_READ0, 0,
-						page_addr);
-
-			host->buf_start = column;
-
-			/* Set program pointer to spare region */
-			if (mtd->writesize == 512)
-				send_cmd(host, NAND_CMD_READOOB, false);
-		} else {
-			host->buf_start = column;
+		if (column >= mtd->writesize)
+			/* call ourself to read a page */
+			mxc_nand_command(mtd, NAND_CMD_READ0, 0, page_addr);
 
-			/* Set program pointer to page start */
-			if (mtd->writesize == 512)
-				send_cmd(host, NAND_CMD_READ0, false);
-		}
+		host->buf_start = column;
 
 		send_cmd(host, command, false);
 		mxc_do_addr_cycle(mtd, column, page_addr);
Signature · 12 lines
1.7.1

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Signature · 3 lines
                                                     ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -