Skip to contentSkip to conversation

2.6.36-rc2 regression: Wrong screen resolution (1024x768 instead of 1680x1050)

DISCUSSION Tino Keitel 2 participants 5 messages Aug 26, 2010 – Aug 30, 2010

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Hi,

booting 2.6.36-rc2-git4 (commit d4348c678977c7093438bbbf2067c49396ae941b) results in a screen resolution of 1024x768 instead of 1680x1050. It works fine with 2.6.35.2.

The framebuffer console uses the correct resolution, but only uses a part of the screen for text output. Xorg output looks distorted.

Xorg log is attached.

$ xrandr 
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096
VGA1 disconnected (normal left inverted right x axis y axis)
DVI1 connected 1024x768+0+0 (normal left inverted right x axis y axis)
454mm x 284mm
   1680x1050      59.9 +
   1280x1024      60.0  
   1280x960       60.0  
   1024x768       60.0* 
   800x600        60.3  
   640x480        60.0  
   720x400        70.1  
TV1 connected 1024x768+0+0 (normal left inverted right x axis y axis)
0mm x 0mm
   848x480        30.0 +
   640x480        30.0 +
   1024x768       30.0* 
   800x600        30.0  

This is a Mac mini Core 2 Duo with Intel i945 graphics.

Regards,
Tino

#2 lore raw
In reply to Tino Keitel
Quoted 22 lines · Tino Keitel

Hi,

booting 2.6.36-rc2-git4 (commit d4348c678977c7093438bbbf2067c49396ae941b) results in a screen resolution of 1024x768 instead of 1680x1050. It works fine with 2.6.35.2.

The framebuffer console uses the correct resolution, but only uses a part of the screen for text output. Xorg output looks distorted.

Xorg log is attached.

$ xrandr 
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096
VGA1 disconnected (normal left inverted right x axis y axis)
DVI1 connected 1024x768+0+0 (normal left inverted right x axis y axis)
454mm x 284mm
   1680x1050      59.9 +
   1280x1024      60.0  
   1280x960       60.0  
   1024x768       60.0* 
   800x600        60.3  
Quoted 8 lines
   640x480        60.0  
   720x400        70.1  
TV1 connected 1024x768+0+0 (normal left inverted right x axis y axis)
0mm x 0mm
   848x480        30.0 +
   640x480        30.0 +
   1024x768       30.0* 
   800x600        30.0  

There is no TV connected, and it was correctly reported as "disconnected" with 2.6.35.

The Mac mini has some special EDID handling, as the EDID data comes from the analog EDID channel IIRC, if that helps.

Regards,
Tino

#3 lore raw
In reply to Tino Keitel
Quoted 31 lines · On czwartek, 26 sierpnia 2010 o 09:30:39 Tino Keitel wrote:

Hi,

booting 2.6.36-rc2-git4 (commit d4348c678977c7093438bbbf2067c49396ae941b) results in a screen resolution of 1024x768 instead of 1680x1050. It works fine with 2.6.35.2.

The framebuffer console uses the correct resolution, but only uses a part of the screen for text output. Xorg output looks distorted.

Xorg log is attached.

$ xrandr
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096
VGA1 disconnected (normal left inverted right x axis y axis)
DVI1 connected 1024x768+0+0 (normal left inverted right x axis y axis)
454mm x 284mm
   1680x1050      59.9 +
   1280x1024      60.0
   1280x960       60.0
   1024x768       60.0*
   800x600        60.3
   640x480        60.0
   720x400        70.1
TV1 connected 1024x768+0+0 (normal left inverted right x axis y axis)
0mm x 0mm
   848x480        30.0 +
   640x480        30.0 +
   1024x768       30.0*
   800x600        30.0
Quoted 2 lines

This is a Mac mini Core 2 Duo with Intel i945 graphics.

Seems be similar to:
https://bugzilla.kernel.org/show_bug.cgi?id=17301

Regards

Signature · 2 lines
Maciej Rutecki
http://www.maciek.unixy.pl
#4 lore raw
Quoted 7 lines · Maciej Rutecki
Quoted 7 lines

TV1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm

   848x480        30.0 +
   640x480        30.0 +
   1024x768       30.0*
   800x600        30.0
Quoted 5 lines
Quoted 2 lines

This is a Mac mini Core 2 Duo with Intel i945 graphics.

Seems be similar to:
https://bugzilla.kernel.org/show_bug.cgi?id=17301

Maybe. I don't know if this is connected, but after disabling TV out using the attached patch, the screen has no signal after suspend to RAM. However, the patch helped to get back the native LCD resolution after boot.

Regards,
Tino

drivers/gpu/drm/i915/intel_overlay.c +2 -0
index 4f00390..1d306a4 100644
@@ -25,6 +25,8 @@
  *
  * Derived from Xorg ddx, xf86-video-intel, src/i830_video.c
  */
+
+#include <linux/seq_file.h>
 #include "drmP.h"
 #include "drm.h"
 #include "i915_drm.h"
drivers/gpu/drm/i915/intel_tv.c +3 -1
index d2029ef..f71e488 100644
@@ -1279,6 +1279,8 @@ intel_tv_detect_type (struct intel_tv *intel_tv)
 	 *  1 0 X svideo
 	 *  0 0 0 Component
 	 */
+	type = -1;
+	goto out;
 	if ((tv_dac & TVDAC_SENSE_MASK) == (TVDAC_B_SENSE | TVDAC_C_SENSE)) {
 		DRM_DEBUG_KMS("Detected Composite TV connection\n");
 		type = DRM_MODE_CONNECTOR_Composite;
@@ -1292,7 +1294,7 @@ intel_tv_detect_type (struct intel_tv *intel_tv)
 		DRM_DEBUG_KMS("No TV connection detected\n");
 		type = -1;
 	}
-
+out:
 	/* Restore interrupt config */
 	spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
 	i915_enable_pipestat(dev_priv, 0, PIPE_HOTPLUG_INTERRUPT_ENABLE |

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx