2.6.36-rc2 regression: Wrong screen resolution (1024x768 instead of 1680x1050)
Subsystems (2)
Hi,
booting 2.6.36-rc2-git4 (commit d4348c678977c7093438bbbf2067c49396ae941b) results in a screen resolution of 1024x768 instead of 1680x1050. It works fine with 2.6.35.2.
The framebuffer console uses the correct resolution, but only uses a part of the screen for text output. Xorg output looks distorted.
Xorg log is attached.
$ xrandr Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 VGA1 disconnected (normal left inverted right x axis y axis) DVI1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 454mm x 284mm 1680x1050 59.9 + 1280x1024 60.0 1280x960 60.0 1024x768 60.0* 800x600 60.3 640x480 60.0 720x400 70.1 TV1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 848x480 30.0 + 640x480 30.0 + 1024x768 30.0* 800x600 30.0
This is a Mac mini Core 2 Duo with Intel i945 graphics.
Regards,
Tino
On Thu, Aug 26, 2010 at 09:30:39 +0200, Tino Keitel wrote:
[...]
Quoted 1 line
Xorg log is attached.
It wasn't. Not it is attached.
Regards,
Tino
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 22 lines · Tino Keitel
Hi,
booting 2.6.36-rc2-git4 (commit
d4348c678977c7093438bbbf2067c49396ae941b) results in a screen resolution of 1024x768 instead of 1680x1050. It works fine with 2.6.35.2.The framebuffer console uses the correct resolution, but only uses a part of the screen for text output. Xorg output looks distorted.
Xorg log is attached.
$ xrandr Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 VGA1 disconnected (normal left inverted right x axis y axis) DVI1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 454mm x 284mm 1680x1050 59.9 + 1280x1024 60.0 1280x960 60.0 1024x768 60.0* 800x600 60.3
Quoted 8 lines
640x480 60.0 720x400 70.1 TV1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 848x480 30.0 + 640x480 30.0 + 1024x768 30.0* 800x600 30.0
There is no TV connected, and it was correctly reported as "disconnected" with 2.6.35.
The Mac mini has some special EDID handling, as the EDID data comes from the analog EDID channel IIRC, if that helps.
Regards,
Tino
Quoted 31 lines · On czwartek, 26 sierpnia 2010 o 09:30:39 Tino Keitel wrote:
Hi,
booting 2.6.36-rc2-git4 (commit
d4348c678977c7093438bbbf2067c49396ae941b) results in a screen resolution of 1024x768 instead of 1680x1050. It works fine with 2.6.35.2.The framebuffer console uses the correct resolution, but only uses a part of the screen for text output. Xorg output looks distorted.
Xorg log is attached.
$ xrandr Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 VGA1 disconnected (normal left inverted right x axis y axis) DVI1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 454mm x 284mm 1680x1050 59.9 + 1280x1024 60.0 1280x960 60.0 1024x768 60.0* 800x600 60.3 640x480 60.0 720x400 70.1 TV1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 848x480 30.0 + 640x480 30.0 + 1024x768 30.0* 800x600 30.0
Quoted 2 lines
This is a Mac mini Core 2 Duo with Intel i945 graphics.
Seems be similar to:
https://bugzilla.kernel.org/show_bug.cgi?id=17301
Regards
Signature · 2 lines
Maciej Rutecki http://www.maciek.unixy.pl
Quoted 7 lines · Maciej Rutecki
Quoted 7 lines
TV1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
848x480 30.0 + 640x480 30.0 + 1024x768 30.0* 800x600 30.0
Quoted 5 lines
Quoted 2 lines
This is a Mac mini Core 2 Duo with Intel i945 graphics.
Seems be similar to:
https://bugzilla.kernel.org/show_bug.cgi?id=17301
Maybe. I don't know if this is connected, but after disabling TV out using the attached patch, the screen has no signal after suspend to RAM. However, the patch helped to get back the native LCD resolution after boot.
Regards,
Tino
drivers/gpu/drm/i915/intel_overlay.c +2 -0
@@ -25,6 +25,8 @@* * Derived from Xorg ddx, xf86-video-intel, src/i830_video.c */ + +#include <linux/seq_file.h> #include "drmP.h" #include "drm.h" #include "i915_drm.h"
drivers/gpu/drm/i915/intel_tv.c +3 -1
@@ -1279,6 +1279,8 @@ intel_tv_detect_type (struct intel_tv *intel_tv)* 1 0 X svideo * 0 0 0 Component */ + type =-1 ; + goto out;if ((tv_dac &TVDAC_SENSE_MASK ) == (TVDAC_B_SENSE |TVDAC_C_SENSE )) {DRM_DEBUG_KMS ("Detected Composite TV connection\n" ); type = DRM_MODE_CONNECTOR_Composite;
@@ -1292,7 +1294,7 @@ intel_tv_detect_type (struct intel_tv *intel_tv)DRM_DEBUG_KMS ("No TV connection detected\n" ); type =-1 ; } - +out:/* Restore interrupt config */ spin_lock_irqsave (&dev_priv->user_irq_lock, irqflags); i915_enable_pipestat(dev_priv, 0, PIPE_HOTPLUG_INTERRUPT_ENABLE |
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx