Skip to contentSkip to conversation

cfi_flash: Add weak default for cfi_flash_bank_addr()

PATCH New Stefan Roese 2 participants 5 messages Sep 9, 2010 Memory technology devices (MTD)

lore
Share & tools
lore
#0 lore raw

PATCH v2 2/4 cfi_flash: Add weak default for cfi_flash_bank_addr()

cfi_flash_bank_addr(int bank_nr) returns the base addresses of the requested bank. Introducing this weak default enables boards to override this functions with a board specific version when required.

This feature will be used in the lwmon5 board update, supporting runtime detection of 2 board revisions with different flash layouts.

---
v2: Coding-style update: Remove spaces before parantheses in function calls

 drivers/mtd/cfi_flash.c |   13 +++++++++----
 1 files changed, 9 insertions(+), 4 deletions(-)
drivers/mtd/cfi_flash.c +9 -4
index b4a09dc..49a2b5e 100644
@@ -85,6 +85,13 @@ flash_info_t flash_info[CFI_MAX_FLASH_BANKS];	/* FLASH chips info */
 #define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
 #endif
 
+static phys_addr_t __cfi_flash_bank_addr(int i)
+{
+	return ((phys_addr_t [])CONFIG_SYS_FLASH_BANKS_LIST)[i];
+}
+phys_addr_t cfi_flash_bank_addr(int i)
+	__attribute__((weak, alias("__cfi_flash_bank_addr")));
+
 static void __flash_write8(u8 value, void *addr)
 {
 	__raw_writeb(value, addr);
@@ -2021,14 +2028,12 @@ unsigned long flash_init (void)
 	getenv_f("unlock", s, sizeof(s));
 #endif
 
-#define BANK_BASE(i)	(((phys_addr_t [CFI_MAX_FLASH_BANKS])CONFIG_SYS_FLASH_BANKS_LIST)[i])
-
 	/* Init: no FLASHes known */
 	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 
-		if (!flash_detect_legacy (BANK_BASE(i), i))
-			flash_get_size (BANK_BASE(i), i);
+		if (!flash_detect_legacy(cfi_flash_bank_addr(i), i))
+			flash_get_size(cfi_flash_bank_addr(i), i);
 		size += flash_info[i].size;
 		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
 #ifndef CONFIG_SYS_FLASH_QUIET_TEST
Signature · 1 line
1.7.2.3
#1 lore raw

PATCH v2 2/4 cfi_flash: Add weak default for cfi_flash_bank_addr()

Dear Stefan Roese,

Quoted 3 lines · In message <[email protected]> you wrote:

cfi_flash_bank_addr(int bank_nr) returns the base addresses of the requested bank. Introducing this weak default enables boards to override this functions with a board specific version when required.

...

Quoted 1 line
drivers/mtd/cfi_flash.c +1 -0
+	return ((phys_addr_t [])CONFIG_SYS_FLASH_BANKS_LIST)[i];

...

Quoted 1 line

-#define BANK_BASE(i) (((phys_addr_t [CFI_MAX_FLASH_BANKS])CONFIG_SYS_FLASH_BANKS_LIST)[i])

Was the change from "[CFI_MAX_FLASH_BANKS]" to "[]" intentional?

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Teenagers are people who express a burning desire to be different by
dressing exactly alike.
There are some strings. They're just not attached.
#2 lore raw

PATCH v2 2/4 cfi_flash: Add weak default for cfi_flash_bank_addr()

Hi Wolfgang,

Quoted 6 lines · On Thursday 09 September 2010 12:42:13 Wolfgang Denk wrote:
Quoted 3 lines

cfi_flash_bank_addr(int bank_nr) returns the base addresses of the requested bank. Introducing this weak default enables boards to override this functions with a board specific version when required.

..

Quoted 8 lines
Quoted 1 line
drivers/mtd/cfi_flash.c +1 -0
+	return ((phys_addr_t [])CONFIG_SYS_FLASH_BANKS_LIST)[i];

..

Quoted 2 lines

-#define BANK_BASE(i) (((phys_addr_t
[CFI_MAX_FLASH_BANKS])CONFIG_SYS_FLASH_BANKS_LIST)[i])

Was the change from "[CFI_MAX_FLASH_BANKS]" to "[]" intentional?

Yes. Do you see a problem with this change?

Cheers,
Stefan

--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de

#3 lore raw

PATCH v2 2/4 cfi_flash: Add weak default for cfi_flash_bank_addr()

Dear Stefan Roese,

Quoted 4 lines · In message <[email protected]> you wrote:
Quoted 2 lines

Was the change from "[CFI_MAX_FLASH_BANKS]" to "[]" intentional?

Yes. Do you see a problem with this change?

Yes - why?

No, I don't see any immediate problems. Just wanted to be sure it was intentional and has been tested in a number of different configurations.

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If you hear an onion ring, answer it.
#4 lore raw

PATCH v2 2/4 cfi_flash: Add weak default for cfi_flash_bank_addr()

Quoted 9 lines · On Thursday 09 September 2010 13:57:45 Wolfgang Denk wrote:
Quoted 3 lines
Quoted 1 line

Was the change from "[CFI_MAX_FLASH_BANKS]" to "[]" intentional?

Yes. Do you see a problem with this change?

Yes - why?

No, I don't see any immediate problems. Just wanted to be sure it was intentional and has been tested in a number of different configurations.

Yes, I've successfully tested with some different flash configurations:

- sequoia with 1 NOR flash bank
- lwmon5 with 1 NOR flash bank
- lwmon5 with 2 NOR flash bank

Cheers,
Stefan

--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de