v2010.09-rc1 is out / v2010.09 delayed by 2 weeks
Hello everybody:
* U-Boot v2010.09-rc1 was released on Fri, 10 Sep 2010.
* Release "v2010.09" is scheduled in 18 days - on September 28, 2010, i. e. we have a delay against the original plan of about 2 weeks.
For details please see
http://www.denx.de/wiki/U-Boot/ReleaseCycle
Please help testing, and check if all your relevant patches have been included.
Thanks.
Wolfgang Denk
Signature · 9 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Fantasy is like alcohol - too much is bad for you, a little bit makes the world a better place. Like an exercise bicycle it takes you nowhere, but it just might tone up the muscles that will. Daydreaming got us where we are today; early in our evolution we learned to let our minds wander so well that they started coming back with souve- nirs. - Terry Pratchett & Stephen Briggs, _The Discworld Companion_
Quoted 2 lines · On Friday, September 10, 2010 13:54:40 Wolfgang Denk wrote:
Please help testing, and check if all your relevant patches have been included.
not sure if you wanted to include these for 2010.09, or wait until after:
11.08.2010 [PATCH] Makefile: restore support for board shortcut targets 19.08.2010 [PATCH v2] MAKEALL: cut down on duplication of targets 15.08.2010 [PATCH 1/4] tools: enable img2srec for "all" target
15.08.2010 [PATCH 2/4] tools: update .gitignore
15.08.2010 [PATCH 3/4] unify toplevel tools targets
15.08.2010 [PATCH 4/4] tools/env: use host build flags
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20100910/e8e7edc4/attachment.pgp
Dear Mike Frysinger,
Quoted 8 lines · In message <[email protected]> you wrote:
not sure if you wanted to include these for 2010.09, or wait until after:
11.08.2010 [PATCH]Makefile: restore support for board shortcut targets 19.08.2010 [PATCH v2] MAKEALL: cut down on duplication of targets 15.08.2010 [PATCH 1/4] tools: enable img2srec for "all" target 15.08.2010 [PATCH 2/4] tools: update .gitignore
15.08.2010 [PATCH 3/4] unify toplevel tools targets 15.08.2010 [PATCH 4/4]tools/env: use host build flags
I've seen these on my list for "next". Should these go into 2010.09?
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de I used to be indecisive, now I'm not sure.
Quoted 10 lines · On Friday, September 10, 2010 14:53:10 Wolfgang Denk wrote:
Quoted 7 lines · Mike Frysinger
not sure if you wanted to include these for 2010.09, or wait until after:
11.08.2010 [PATCH]Makefile: restore support for board shortcut targets 19.08.2010 [PATCH v2] MAKEALL: cut down on duplication of targets 15.08.2010 [PATCH 1/4] tools: enable img2srec for "all" target 15.08.2010 [PATCH 2/4] tools: update .gitignore
15.08.2010 [PATCH 3/4] unify toplevel tools targets 15.08.2010 [PATCH 4/4]tools/env: use host build flagsI've seen these on my list for "next". Should these go into 2010.09?
if you want to keep the tree settled, then keeping them in "next" is OK by me. not that there should be anything wrong with these changes ...
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20100910/9b24d983/attachment.pgp
Quoted 6 lines · Wolfgang Denk
* U-Boot v2010.09-rc1 was released on Fri, 10 Sep 2010.
* Release "v2010.09" is scheduled in 18 days - on September 28, 2010, ?i. e. we have a delay against the original plan of about 2 weeks. Please help testing, and check if all your relevant patches have been included.
Tested on da850evm with NAND enabled; the env.OOB marker was recognized, the environment was loaded and I was able to load and boot a uImage kernel from NAND.
Best Regards,
Ben Gardiner
---
Nanometrics Inc.
http://www.nanometrics.ca
Dear Ben Gardiner,
Quoted 4 lines · In message <[email protected]> you…
Tested on da850evm with NAND enabled; the env.OOB marker was recognized, the environment was loaded and I was able to load and boot a uImage kernel from NAND.
Thanks a lot.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Dear Lord: I just want *one* one-armed manager so I never have to hear "On the other hand", again.
Dear Wolfgang,
Quoted 2 lines · Wolfgang Denk
... check if all your relevant patches have been
included.
What's about
http://lists.denx.de/pipermail/u-boot/2010-July/074542.html
? Or if you don't like that, this
http://lists.denx.de/pipermail/u-boot/2010-August/075303.html
?
Best regards
Dirk
Dear Dirk Behme,
Quoted 9 lines · In message <[email protected]> you wrote:
Dear Wolfgang,
Quoted 2 lines · Wolfgang Denk
... check if all your relevant patches have been
included.What's about
Doesn't apply:
Applying: Remove unused variable bi_env
fatal: sha1 information is lacking or useless (common/cmd_bdinfo.c). Repository lacks necessary blobs to fall back on 3-way merge. Cannot fall back to three-way merge.
Patch failed at 0001 Remove unused variable bi_env
When you have resolved this problem run "git am --resolved". If you would prefer to skip this patch, instead run "git am --skip". To restore the original branch and stop patching run "git am --abort".
Quoted 3 lines
? Or if you don't like that, this
http://lists.denx.de/pipermail/u-boot/2010-August/075303.html
This one has been applied to the "next" branch.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Monday is an awful way to spend one seventh of your life.
Dear Wolfgang Denk,
Quoted 2 lines
Please help testing, and check if all your relevant patches have been included.
Rebasing worked without manual intervention, u-boot still compiles and works for my board (at91sam9xe-based). Code size increased 0x20 bytes.
The following (published) patches are left ahead of master here:
3d70dcf2d8ea7e7a50d5d5d5a0429341db87e38f display_buffer: fix misaligned buffer
- urgent!
1110f276e9785d0270cfc9ec316dd475145f95d0 SPI: cmd_spi.c: add options to specify bus and mode
- has been posted 26.08.2010
7c7e2813318b84fc4fbec57b23e2ad68ff000564 NET: move legacy enc28j60.c to sidetrack
- Ben took that one to net/next on 31.08.2010
With Best Regards,
Reinhard
Quoted 2 lines · On Sunday, September 12, 2010 08:58:29 Reinhard Meyer wrote:
1110f276e9785d0270cfc9ec316dd475145f95d0SPI:cmd_spi.c: add options to specify bus and mode - has been posted 26.08.2010
i already merged into my sf branch and will push post 2010.09 if Woflgang doesnt pick it up himself
Quoted 2 lines
7c7e2813318b84fc4fbec57b23e2ad68ff000564NET: move legacyenc28j60.cto sidetrack - Ben took that one to net/next on 31.08.2010
that's Ben's call to move from net to mainline ... and unless there's a pressing reason for this to be in mainline (i cant see any), keeping it for post release is OK ...
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20100912/edcb368c/attachment.pgp
Dear Mike Frysinger,
Quoted 6 lines
Quoted 2 lines
7c7e2813318b84fc4fbec57b23e2ad68ff000564NET: move legacyenc28j60.cto sidetrack - Ben took that one to net/next on 31.08.2010that's Ben's call to move from net to mainline ... and unless there's a pressing reason for this to be in mainline (i cant see any), keeping it for post release is OK ...
As I recall, the idea Ben and me had was to first sidetrack the old driver and later bring in the new one.
Otherwise, in fact - until that patch is in - I should have it always vomited out together with the new enc28j60 driver's patch as a series.
Reinhard
Dear Mike Frysinger,
Quoted 7 lines · In message <[email protected]> you wrote:
Quoted 2 lines · On Sunday, September 12, 2010 08:58:29 Reinhard Meyer wrote:
1110f276e9785d0270cfc9ec316dd475145f95d0SPI:cmd_spi.c: add options to specify bus and mode - has been posted 26.08.2010i already merged into my sf branch and will push post 2010.09 if Woflgang doesnt pick it up himself
I see this for "next" - pull requests welcome.
["next" will be out RSN.]
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Program maintenance is an entropy-increasing process, and even its most skilfull execution only delays the subsidence of the system into unfixable obsolescence. - Fred Brooks, "The Mythical Man Month"
Quoted 6 lines · Mike Frysinger
Quoted 2 lines · On Sunday, September 12, 2010 08:58:29 Reinhard Meyer wrote:
1110f276e9785d0270cfc9ec316dd475145f95d0SPI:cmd_spi.c: add options to specify bus and mode - has been posted 26.08.2010i already merged into my sf branch and will push post 2010.09 if Woflgang doesnt pick it up himself
Quoted 6 lines
Quoted 2 lines
7c7e2813318b84fc4fbec57b23e2ad68ff000564NET: move legacyenc28j60.cto sidetrack - Ben took that one to net/next on 31.08.2010that's Ben's call to move from net to mainline ... and unless there's a pressing reason for this to be in mainline (i cant see any), keeping it for post release is OK ...
-mike
Yeah, I don't see a compelling reason to bring this in now. I'll send a pull request for next soon so the code gets to mainline early in the next cycle.
regards,
Ben
Dear Reinhard Meyer,
Quoted 11 lines · In message <[email protected]> you wrote:
Dear Wolfgang Denk,
Quoted 2 lines
Please help testing, and check if all your relevant patches have been included.
Rebasing worked without manual intervention, u-boot still compiles and works for my board (at91sam9xe-based). Code size increased
0x20bytes.The following (published) patches are left ahead of master here:
3d70dcf2d8ea7e7a50d5d5d5a0429341db87e38fdisplay_buffer: fix misaligned buffer
- urgent!
Is in "master".
Quoted 2 lines
1110f276e9785d0270cfc9ec316dd475145f95d0SPI:cmd_spi.c: add options to specify bus and mode
- has been posted 26.08.2010
Scheduled for next.
Quoted 2 lines
7c7e2813318b84fc4fbec57b23e2ad68ff000564NET: move legacyenc28j60.cto sidetrack
- Ben took that one to net/next on 31.08.2010
I'm waiting for his pull req.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de If all you have is a hammer, everything looks like a nail.
Quoted 2 lines · Wolfgang Denk
Please help testing, and check if all your relevant patches have been included.
In arch/i386/lib/board.c, the declaration of do_go_exec() has changed, thus leading to the following build failure[0]:
board.c: In function 'do_go_exec':
board.c:440: error: assignment of read-only location '*(argv + 0xfffffffffffffffffffffffffffffffcu)'
cc1: warnings being treated as errors
board.c:442: error: passing argument 2 of 'entry' discards qualifiers from pointer target type board.c:442: note: expected 'char **' but argument is of type 'char * const*' make[2]: *** [board.o] Error 1
[0] https://buildd.debian.org/fetch.cgi?pkg=u-boot;ver=2010.09~rc1-1;arch=i386;stamp=1284213109
Quoted 7 lines · Clint Adams
Quoted 2 lines · Wolfgang Denk
Please help testing, and check if all your relevant patches have been included.
In
arch/i386/lib/board.c, the declaration ofdo_go_exec()has changed, thus leading to the following build failure[0]:
Quoted 6 lines
board.c: In function 'do_go_exec':
board.c:440: error: assignment of read-only location '*(argv +0xfffffffffffffffffffffffffffffffcu)'
cc1: warnings being treated as errors
board.c:442: error: passing argument 2 of 'entry' discards qualifiers from pointer target type board.c:442: note: expected 'char **' but argument is of type 'char * const*' make[2]: *** [board.o] Error 1
I have a fix for this in my offline tree. I'm ok with missing this merge window - I'll upload my patches for the next one.
Thanks for catching this though
Regards,
Graeme
Dear Graeme Russ,
Quoted 3 lines · In message <[email protected]> you…
I have a fix for this in my offline tree. I'm ok with missing this merge window - I'll upload my patches for the next one.
Fixes should go in _now_. This is what this phase of the development cycle is for.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de It is more rational to sacrifice one life than six. -- Spock, "The Galileo Seven", stardate 2822.3
Wolfgang,
Quoted 10 lines · Wolfgang Denk
Dear Graeme Russ,
Quoted 3 lines · In message <[email protected]> you…
I have a fix for this in my offline tree. I'm ok with missing this merge window - I'll upload my patches for the next one.
Fixes should go in _now_. This is what this phase of the development cycle is for.
Pull request sent.
Wolfgang, I was waiting for feedback for some other patches in the series, but have cut the series short to at least get the fixes in.
This is my first ever git push / git pull request and I stuffed up and included one extra patch (removal of unmaintained boards) which is not a fix, but would have gone in next merge - sorry about that
Regards,
Graeme
Quoted 4 lines · Wolfgang Denk
Hello everybody:
* U-Boot v2010.09-rc1 was released on Fri, 10 Sep 2010.
Quoted 8 lines
* Release "v2010.09" is scheduled in 18 days - on September 28, 2010, ?i. e. we have a delay against the original plan of about 2 weeks.
For details please see
http://www.denx.de/wiki/U-Boot/ReleaseCyclePlease help testing, and check if all your relevant patches have been included.
I did a bit of v2010.09-rc1 testing on OMAP3 this evening and things looked good until I tried a simple memory display!
The output froze after the memory address was displayed:
Overo # md 82000000 10
82000000:
I reverted to an earlier version and things worked as expected:
Overo # md 82000000 10
82000000: fdffffff ddffddd7 bd7afdef dbffccff ..........z..... 82000010: fd37cfff 7f7fff6f f5ffdeef fdf7eef7 ..7.o........... 82000020: fabbfdff de17fdcf 7e777df7 ddfd7ddf .........}w~.}.. 82000030: ed77cefe ddf3fcff ff7fcd77 bf7eed93 ..w.....w.....~.
Has anyone else run into this? I need to get some sleep now, but will investigate further in the morning.
Steve
Dear Steve Sakoman,
Quoted 8 lines
I did a bit of v2010.09-rc1 testing on OMAP3 this evening and things looked good until I tried a simple memory display!
The output froze after the memory address was displayed:
Overo # md 82000000 10
82000000:
That _might_ be the unaligned access to the buffer. Try
[PATCH v2] display_buffer: fix misaligned buffer
from 31.08.2010. If that helps its even more important that patch gets mainline asap ;)
Reinhard
Quoted 14 lines · Steve Sakoman
Quoted 4 lines · Wolfgang Denk
Hello everybody:
* U-Boot v2010.09-rc1 was released on Fri, 10 Sep 2010.
Quoted 8 lines
* Release "v2010.09" is scheduled in 18 days - on September 28, 2010, i. e. we have a delay against the original plan of about 2 weeks.
For details please see
http://www.denx.de/wiki/U-Boot/ReleaseCyclePlease help testing, and check if all your relevant patches have been included.
Quoted 8 lines
I did a bit of v2010.09-rc1 testing on OMAP3 this evening and things looked good until I tried a simple memory display!
The output froze after the memory address was displayed:
Overo # md 82000000 10
82000000:
Hi Steve,
do not worry, this is a known problem. As reported by Rheinard, we need the patch to fix misaligned access. It is was not merged up now, but we need soon before the release:
"3d70dcf2d8ea7e7a50d5d5d5a0429341db87e38f display_buffer: fix misaligned buffer
- urgent!"
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================
Quoted 26 lines · Stefano Babic
Quoted 14 lines · Steve Sakoman
Quoted 4 lines · Wolfgang Denk
Hello everybody:
* U-Boot v2010.09-rc1 was released on Fri, 10 Sep 2010.
Quoted 8 lines
* Release "v2010.09" is scheduled in 18 days - on September 28, 2010, ?i. e. we have a delay against the original plan of about 2 weeks.
For details please see
http://www.denx.de/wiki/U-Boot/ReleaseCyclePlease help testing, and check if all your relevant patches have been included.
Quoted 8 lines
I did a bit of v2010.09-rc1 testing on OMAP3 this evening and things looked good until I tried a simple memory display!
The output froze after the memory address was displayed:
Overo # md 82000000 10
82000000:Hi Steve,
Quoted 7 lines
do not worry, this is a known problem. As reported by Rheinard, we need the patch to fix misaligned access. It is was not merged up now, but we need soon before the release:
"
3d70dcf2d8ea7e7a50d5d5d5a0429341db87e38fdisplay_buffer: fix misaligned buffer
- urgent!"
I tried this patch and it does indeed fix the issue.
I see that Wolfgang has already pushed it to master, so I'll get back to testing the rc-1 on OMAP3 and OMAP4.
Thanks for the quick response!
Steve
Quoted 9 lines · Wolfgang Denk
Hello everybody:
* U-Boot v2010.09-rc1 was released on Fri, 10 Sep 2010.
* Release "v2010.09" is scheduled in 18 days - on September 28, 2010, i. e. we have a delay against the original plan of about 2 weeks.
For details please see
http://www.denx.de/wiki/U-Boot/ReleaseCycle
Hi Wolfgang,
a recent post pointed out to the following patch:
[PATCH] [PATCH v6]Save environment data to mmc.
http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/78772
I see no urgency, but I have not seen any opened issues with this patch and first version was sent some months ago. Any chance to get it in the release or should we only mark it for the "next" branch ?
Best regards,
Stefano
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================
Dear Stefano Babic,
Quoted 10 lines · In message <[email protected]> you wrote:
a recent post pointed out to the following patch:
[PATCH] [PATCH v6]Save environment data to mmc.
http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/78772
I see no urgency, but I have not seen any opened issues with this patch and first version was sent some months ago. Any chance to get it in the release or should we only mark it for the "next" branch ?
Did you test this? Is this to be considered a formal ACK?
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de It is dangerous to be right on a subject on which the established authorities are wrong. -- Voltaire
Quoted 2 lines · Wolfgang Denk
Dear Stefano Babic,
Hi Wolfgang,
Quoted 5 lines
Quoted 4 lines · In message <[email protected]> you wrote:
a recent post pointed out to the following patch:
[PATCH] [PATCH v6]Save environment data to mmc.
Quoted 7 lines
Quoted 5 lines
http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/78772
I see no urgency, but I have not seen any opened issues with this patch and first version was sent some months ago. Any chance to get it in the release or should we only mark it for the "next" branch ?
Did you test this? Is this to be considered a formal ACK?
Yes, and I tested again on top of v2010.09-rc1.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================