Skip to contentSkip to conversation

v2010.09-rc1 is out / v2010.09 delayed by 2 weeks

U-Boot Wolfgang Denk 10 participants 25 messages Sep 10, 2010 – Sep 19, 2010

lore
Share & tools
lore
#0 lore raw

Hello everybody:

* U-Boot v2010.09-rc1 was released on Fri, 10 Sep 2010.

* Release "v2010.09" is scheduled in 18 days - on September 28, 2010, i. e. we have a delay against the original plan of about 2 weeks.

For details please see
http://www.denx.de/wiki/U-Boot/ReleaseCycle

Please help testing, and check if all your relevant patches have been included.

Thanks.

Wolfgang Denk

Signature · 9 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Fantasy is like alcohol - too much is bad for you, a little bit makes
the world a better place. Like  an  exercise  bicycle  it  takes  you
nowhere, but it just might tone up the muscles that will. Daydreaming
got  us  where we are today; early in our evolution we learned to let
our minds wander so well that they started coming  back  with  souve-
nirs.   - Terry Pratchett & Stephen Briggs, _The Discworld Companion_
#1 lore raw
Quoted 2 lines · On Friday, September 10, 2010 13:54:40 Wolfgang Denk wrote:

Please help testing, and check if all your relevant patches have been included.

not sure if you wanted to include these for 2010.09, or wait until after:
11.08.2010 [PATCH] Makefile: restore support for board shortcut targets 19.08.2010 [PATCH v2] MAKEALL: cut down on duplication of targets 15.08.2010 [PATCH 1/4] tools: enable img2srec for "all" target
15.08.2010 [PATCH 2/4] tools: update .gitignore
15.08.2010 [PATCH 3/4] unify toplevel tools targets
15.08.2010 [PATCH 4/4] tools/env: use host build flags
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20100910/e8e7edc4/attachment.pgp

#2 lore raw

Dear Mike Frysinger,

Quoted 8 lines · In message <[email protected]> you wrote:

not sure if you wanted to include these for 2010.09, or wait until after:
11.08.2010 [PATCH] Makefile: restore support for board shortcut targets 19.08.2010 [PATCH v2] MAKEALL: cut down on duplication of targets 15.08.2010 [PATCH 1/4] tools: enable img2srec for "all" target 15.08.2010 [PATCH 2/4] tools: update .gitignore
15.08.2010 [PATCH 3/4] unify toplevel tools targets 15.08.2010 [PATCH 4/4] tools/env: use host build flags

I've seen these on my list for "next". Should these go into 2010.09?

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I used to be indecisive, now I'm not sure.
#3 lore raw
Quoted 10 lines · On Friday, September 10, 2010 14:53:10 Wolfgang Denk wrote:
Quoted 7 lines · Mike Frysinger

not sure if you wanted to include these for 2010.09, or wait until after:
11.08.2010 [PATCH] Makefile: restore support for board shortcut targets 19.08.2010 [PATCH v2] MAKEALL: cut down on duplication of targets 15.08.2010 [PATCH 1/4] tools: enable img2srec for "all" target 15.08.2010 [PATCH 2/4] tools: update .gitignore
15.08.2010 [PATCH 3/4] unify toplevel tools targets 15.08.2010 [PATCH 4/4] tools/env: use host build flags

I've seen these on my list for "next". Should these go into 2010.09?

if you want to keep the tree settled, then keeping them in "next" is OK by me. not that there should be anything wrong with these changes ...
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20100910/9b24d983/attachment.pgp

#4 lore raw
In reply to Wolfgang Denk
Quoted 6 lines · Wolfgang Denk

* U-Boot v2010.09-rc1 was released on Fri, 10 Sep 2010.

* Release "v2010.09" is scheduled in 18 days - on September 28, 2010, ?i. e. we have a delay against the original plan of about 2 weeks. Please help testing, and check if all your relevant patches have been included.

Tested on da850evm with NAND enabled; the env.OOB marker was recognized, the environment was loaded and I was able to load and boot a uImage kernel from NAND.

Best Regards,
Ben Gardiner

---
Nanometrics Inc.
http://www.nanometrics.ca

#5 lore raw

Dear Ben Gardiner,

Quoted 4 lines · In message <[email protected]> you…

Tested on da850evm with NAND enabled; the env.OOB marker was recognized, the environment was loaded and I was able to load and boot a uImage kernel from NAND.

Thanks a lot.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Dear Lord: I just want *one* one-armed manager so  I  never  have  to
hear "On the other hand", again.
#7 lore raw

Dear Dirk Behme,

Quoted 9 lines · In message <[email protected]> you wrote:

Dear Wolfgang,

Quoted 2 lines · Wolfgang Denk

... check if all your relevant patches have been
included.

What's about

http://lists.denx.de/pipermail/u-boot/2010-July/074542.html

Doesn't apply:

Applying: Remove unused variable bi_env
fatal: sha1 information is lacking or useless (common/cmd_bdinfo.c). Repository lacks necessary blobs to fall back on 3-way merge. Cannot fall back to three-way merge.
Patch failed at 0001 Remove unused variable bi_env
When you have resolved this problem run "git am --resolved". If you would prefer to skip this patch, instead run "git am --skip". To restore the original branch and stop patching run "git am --abort".

Quoted 3 lines

? Or if you don't like that, this

http://lists.denx.de/pipermail/u-boot/2010-August/075303.html

This one has been applied to the "next" branch.

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Monday is an awful way to spend one seventh of your life.
#8 lore raw
In reply to Wolfgang Denk

Dear Wolfgang Denk,

Quoted 2 lines

Please help testing, and check if all your relevant patches have been included.

Rebasing worked without manual intervention, u-boot still compiles and works for my board (at91sam9xe-based). Code size increased 0x20 bytes.

The following (published) patches are left ahead of master here:

3d70dcf2d8ea7e7a50d5d5d5a0429341db87e38f display_buffer: fix misaligned buffer
- urgent!

1110f276e9785d0270cfc9ec316dd475145f95d0 SPI: cmd_spi.c: add options to specify bus and mode
- has been posted 26.08.2010

7c7e2813318b84fc4fbec57b23e2ad68ff000564 NET: move legacy enc28j60.c to sidetrack
- Ben took that one to net/next on 31.08.2010

With Best Regards,
Reinhard

#9 lore raw
Quoted 2 lines · On Sunday, September 12, 2010 08:58:29 Reinhard Meyer wrote:

1110f276e9785d0270cfc9ec316dd475145f95d0 SPI: cmd_spi.c: add options to specify bus and mode - has been posted 26.08.2010

i already merged into my sf branch and will push post 2010.09 if Woflgang doesnt pick it up himself

Quoted 2 lines

7c7e2813318b84fc4fbec57b23e2ad68ff000564 NET: move legacy enc28j60.c to sidetrack - Ben took that one to net/next on 31.08.2010

that's Ben's call to move from net to mainline ... and unless there's a pressing reason for this to be in mainline (i cant see any), keeping it for post release is OK ...
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20100912/edcb368c/attachment.pgp

#10 lore raw

Dear Mike Frysinger,

Quoted 6 lines
Quoted 2 lines

7c7e2813318b84fc4fbec57b23e2ad68ff000564 NET: move legacy enc28j60.c to sidetrack - Ben took that one to net/next on 31.08.2010

that's Ben's call to move from net to mainline ... and unless there's a pressing reason for this to be in mainline (i cant see any), keeping it for post release is OK ...

As I recall, the idea Ben and me had was to first sidetrack the old driver and later bring in the new one.

Otherwise, in fact - until that patch is in - I should have it always vomited out together with the new enc28j60 driver's patch as a series.

Reinhard

#11 lore raw
In reply to Mike Frysinger

Dear Mike Frysinger,

Quoted 7 lines · In message <[email protected]> you wrote:
Quoted 2 lines · On Sunday, September 12, 2010 08:58:29 Reinhard Meyer wrote:

1110f276e9785d0270cfc9ec316dd475145f95d0 SPI: cmd_spi.c: add options to specify bus and mode - has been posted 26.08.2010

i already merged into my sf branch and will push post 2010.09 if Woflgang doesnt pick it up himself

I see this for "next" - pull requests welcome.

["next" will be out RSN.]

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Program maintenance is an entropy-increasing process,  and  even  its
most skilfull execution only delays the subsidence of the system into
unfixable obsolescence.       - Fred Brooks, "The Mythical Man Month"
#12 lore raw
In reply to Mike Frysinger
Quoted 6 lines · Mike Frysinger
Quoted 2 lines · On Sunday, September 12, 2010 08:58:29 Reinhard Meyer wrote:

1110f276e9785d0270cfc9ec316dd475145f95d0 SPI: cmd_spi.c: add options to specify bus and mode - has been posted 26.08.2010

i already merged into my sf branch and will push post 2010.09 if Woflgang doesnt pick it up himself

Quoted 6 lines
Quoted 2 lines

7c7e2813318b84fc4fbec57b23e2ad68ff000564 NET: move legacy enc28j60.c to sidetrack - Ben took that one to net/next on 31.08.2010

that's Ben's call to move from net to mainline ... and unless there's a pressing reason for this to be in mainline (i cant see any), keeping it for post release is OK ...
-mike

Yeah, I don't see a compelling reason to bring this in now. I'll send a pull request for next soon so the code gets to mainline early in the next cycle.

regards,
Ben

#13 lore raw
In reply to Reinhard Meyer

Dear Reinhard Meyer,

Quoted 11 lines · In message <[email protected]> you wrote:

Dear Wolfgang Denk,

Quoted 2 lines

Please help testing, and check if all your relevant patches have been included.

Rebasing worked without manual intervention, u-boot still compiles and works for my board (at91sam9xe-based). Code size increased 0x20 bytes.

The following (published) patches are left ahead of master here:

3d70dcf2d8ea7e7a50d5d5d5a0429341db87e38f display_buffer: fix misaligned buffer
- urgent!

Is in "master".

Quoted 2 lines

1110f276e9785d0270cfc9ec316dd475145f95d0 SPI: cmd_spi.c: add options to specify bus and mode
- has been posted 26.08.2010

Scheduled for next.

Quoted 2 lines

7c7e2813318b84fc4fbec57b23e2ad68ff000564 NET: move legacy enc28j60.c to sidetrack
- Ben took that one to net/next on 31.08.2010

I'm waiting for his pull req.

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If all you have is a hammer, everything looks like a nail.
#14 lore raw
In reply to Wolfgang Denk
Quoted 2 lines · Wolfgang Denk

Please help testing, and check if all your relevant patches have been included.

In arch/i386/lib/board.c, the declaration of do_go_exec() has changed, thus leading to the following build failure[0]:

board.c: In function 'do_go_exec':
board.c:440: error: assignment of read-only location '*(argv + 0xfffffffffffffffffffffffffffffffcu)'
cc1: warnings being treated as errors
board.c:442: error: passing argument 2 of 'entry' discards qualifiers from pointer target type board.c:442: note: expected 'char **' but argument is of type 'char * const*' make[2]: *** [board.o] Error 1

[0] https://buildd.debian.org/fetch.cgi?pkg=u-boot;ver=2010.09~rc1-1;arch=i386;stamp=1284213109

#15 lore raw
Quoted 7 lines · Clint Adams
Quoted 2 lines · Wolfgang Denk

Please help testing, and check if all your relevant patches have been included.

In arch/i386/lib/board.c, the declaration of do_go_exec() has changed, thus leading to the following build failure[0]:

Quoted 6 lines

board.c: In function 'do_go_exec':
board.c:440: error: assignment of read-only location '*(argv + 0xfffffffffffffffffffffffffffffffcu)'
cc1: warnings being treated as errors
board.c:442: error: passing argument 2 of 'entry' discards qualifiers from pointer target type board.c:442: note: expected 'char **' but argument is of type 'char * const*' make[2]: *** [board.o] Error 1

I have a fix for this in my offline tree. I'm ok with missing this merge window - I'll upload my patches for the next one.

Thanks for catching this though

Regards,

Graeme

#16 lore raw

Dear Graeme Russ,

Quoted 3 lines · In message <[email protected]> you…

I have a fix for this in my offline tree. I'm ok with missing this merge window - I'll upload my patches for the next one.

Fixes should go in _now_. This is what this phase of the development cycle is for.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It is more rational to sacrifice one life than six.
	-- Spock, "The Galileo Seven", stardate 2822.3
#17 lore raw

Wolfgang,

Quoted 10 lines · Wolfgang Denk

Dear Graeme Russ,

Quoted 3 lines · In message <[email protected]> you…

I have a fix for this in my offline tree. I'm ok with missing this merge window - I'll upload my patches for the next one.

Fixes should go in _now_. This is what this phase of the development cycle is for.

Pull request sent.

Wolfgang, I was waiting for feedback for some other patches in the series, but have cut the series short to at least get the fixes in.

This is my first ever git push / git pull request and I stuffed up and included one extra patch (removal of unmaintained boards) which is not a fix, but would have gone in next merge - sorry about that

Regards,

Graeme

#18 lore raw
In reply to Wolfgang Denk
Quoted 4 lines · Wolfgang Denk

Hello everybody:

* U-Boot v2010.09-rc1 was released on Fri, 10 Sep 2010.

Quoted 8 lines

* Release "v2010.09" is scheduled in 18 days - on September 28, 2010, ?i. e. we have a delay against the original plan of about 2 weeks.

For details please see
http://www.denx.de/wiki/U-Boot/ReleaseCycle

Please help testing, and check if all your relevant patches have been included.

I did a bit of v2010.09-rc1 testing on OMAP3 this evening and things looked good until I tried a simple memory display!

The output froze after the memory address was displayed:

Overo # md 82000000 10
82000000:

I reverted to an earlier version and things worked as expected:

Overo # md 82000000 10

82000000: fdffffff ddffddd7 bd7afdef dbffccff    ..........z.....
82000010: fd37cfff 7f7fff6f f5ffdeef fdf7eef7    ..7.o...........
82000020: fabbfdff de17fdcf 7e777df7 ddfd7ddf    .........}w~.}..
82000030: ed77cefe ddf3fcff ff7fcd77 bf7eed93    ..w.....w.....~.

Has anyone else run into this? I need to get some sleep now, but will investigate further in the morning.

Steve

#19 lore raw

Dear Steve Sakoman,

Quoted 8 lines

I did a bit of v2010.09-rc1 testing on OMAP3 this evening and things looked good until I tried a simple memory display!

The output froze after the memory address was displayed:

Overo # md 82000000 10
82000000:

That _might_ be the unaligned access to the buffer. Try

[PATCH v2] display_buffer: fix misaligned buffer

from 31.08.2010. If that helps its even more important that patch gets mainline asap ;)

Reinhard

#20 lore raw
In reply to Steve Sakoman
Quoted 14 lines · Steve Sakoman
Quoted 4 lines · Wolfgang Denk

Hello everybody:

* U-Boot v2010.09-rc1 was released on Fri, 10 Sep 2010.

Quoted 8 lines

* Release "v2010.09" is scheduled in 18 days - on September 28, 2010, i. e. we have a delay against the original plan of about 2 weeks.

For details please see
http://www.denx.de/wiki/U-Boot/ReleaseCycle

Please help testing, and check if all your relevant patches have been included.

Quoted 8 lines

I did a bit of v2010.09-rc1 testing on OMAP3 this evening and things looked good until I tried a simple memory display!

The output froze after the memory address was displayed:

Overo # md 82000000 10
82000000:

Hi Steve,

do not worry, this is a known problem. As reported by Rheinard, we need the patch to fix misaligned access. It is was not merged up now, but we need soon before the release:

"3d70dcf2d8ea7e7a50d5d5d5a0429341db87e38f display_buffer: fix misaligned buffer
- urgent!"

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================
#21 lore raw
Quoted 26 lines · Stefano Babic
Quoted 14 lines · Steve Sakoman
Quoted 4 lines · Wolfgang Denk

Hello everybody:

* U-Boot v2010.09-rc1 was released on Fri, 10 Sep 2010.

Quoted 8 lines

* Release "v2010.09" is scheduled in 18 days - on September 28, 2010, ?i. e. we have a delay against the original plan of about 2 weeks.

For details please see
http://www.denx.de/wiki/U-Boot/ReleaseCycle

Please help testing, and check if all your relevant patches have been included.

Quoted 8 lines

I did a bit of v2010.09-rc1 testing on OMAP3 this evening and things looked good until I tried a simple memory display!

The output froze after the memory address was displayed:

Overo # md 82000000 10
82000000:

Hi Steve,

Quoted 7 lines

do not worry, this is a known problem. As reported by Rheinard, we need the patch to fix misaligned access. It is was not merged up now, but we need soon before the release:

"3d70dcf2d8ea7e7a50d5d5d5a0429341db87e38f display_buffer: fix misaligned buffer
- urgent!"

I tried this patch and it does indeed fix the issue.

I see that Wolfgang has already pushed it to master, so I'll get back to testing the rc-1 on OMAP3 and OMAP4.

Thanks for the quick response!

Steve

#22 lore raw
In reply to Wolfgang Denk
Quoted 9 lines · Wolfgang Denk

Hello everybody:

* U-Boot v2010.09-rc1 was released on Fri, 10 Sep 2010.

* Release "v2010.09" is scheduled in 18 days - on September 28, 2010, i. e. we have a delay against the original plan of about 2 weeks.

For details please see
http://www.denx.de/wiki/U-Boot/ReleaseCycle

Hi Wolfgang,

a recent post pointed out to the following patch:

[PATCH] [PATCH v6]Save environment data to mmc.

http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/78772

I see no urgency, but I have not seen any opened issues with this patch and first version was sent some months ago. Any chance to get it in the release or should we only mark it for the "next" branch ?

Best regards,
Stefano

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================
#23 lore raw

Dear Stefano Babic,

Quoted 10 lines · In message <[email protected]> you wrote:

a recent post pointed out to the following patch:

[PATCH] [PATCH v6]Save environment data to mmc.

http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/78772

I see no urgency, but I have not seen any opened issues with this patch and first version was sent some months ago. Any chance to get it in the release or should we only mark it for the "next" branch ?

Did you test this? Is this to be considered a formal ACK?

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It is dangerous to be right on a subject  on  which  the  established
authorities are wrong.                                    -- Voltaire
#24 lore raw
Quoted 2 lines · Wolfgang Denk

Dear Stefano Babic,

Hi Wolfgang,

Quoted 5 lines
Quoted 4 lines · In message <[email protected]> you wrote:

a recent post pointed out to the following patch:

[PATCH] [PATCH v6]Save environment data to mmc.

Quoted 7 lines
Quoted 5 lines

http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/78772

I see no urgency, but I have not seen any opened issues with this patch and first version was sent some months ago. Any chance to get it in the release or should we only mark it for the "next" branch ?

Did you test this? Is this to be considered a formal ACK?

Yes, and I tested again on top of v2010.09-rc1.

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================