powerpc: Cleanup BOOTFLAG_* usage
PATCH 1/1 powerpc: Cleanup BOOTFLAG_* usage
BOOTFLAG_COLD and BOOTFLAG_WARM have identical definitions for every PowerPC board, so share a common definition.
---
It looks like there are only a few boards (5) that use the warm/cold boot concept, maybe we should remove this largely unused feature? Or at least remove it for most CPU types? Is anyone out there using it?
arch/powerpc/cpu/74xx_7xx/start.S | 1 + arch/powerpc/cpu/mpc512x/start.S | 1 + arch/powerpc/cpu/mpc5xx/start.S | 1 + arch/powerpc/cpu/mpc5xxx/start.S | 1 + arch/powerpc/cpu/mpc8220/start.S | 1 + arch/powerpc/cpu/mpc824x/start.S | 1 + arch/powerpc/cpu/mpc8260/start.S | 1 + arch/powerpc/cpu/mpc83xx/start.S | 1 + arch/powerpc/cpu/mpc86xx/start.S | 1 + arch/powerpc/cpu/mpc8xx/start.S | 1 + arch/powerpc/include/asm/u-boot.h | 5 +++++ board/fads/fads.h | 8 -------- include/configs/A3000.h | 8 -------- include/configs/ADCIOP.h | 9 --------- include/configs/AMX860.h | 8 -------- include/configs/AP1000.h | 8 -------- include/configs/APC405.h | 8 -------- include/configs/AR405.h | 8 -------- include/configs/ASH405.h | 8 -------- include/configs/ATUM8548.h | 8 -------- include/configs/Adder.h | 8 -------- include/configs/Alaska8220.h | 3 --- include/configs/BAB7xx.h | 9 --------- include/configs/BC3450.h | 3 --- include/configs/BMW.h | 9 --------- include/configs/CANBT.h | 9 --------- include/configs/CATcenter.h | 9 --------- include/configs/CCM.h | 9 --------- include/configs/CMS700.h | 8 -------- include/configs/CPC45.h | 9 --------- include/configs/CPCI2DP.h | 8 -------- include/configs/CPCI405.h | 9 --------- include/configs/CPCI4052.h | 9 --------- include/configs/CPCI405AB.h | 9 --------- include/configs/CPCI405DT.h | 8 -------- include/configs/CPCI750.h | 8 -------- include/configs/CPCIISER4.h | 8 -------- include/configs/CPU86.h | 9 --------- include/configs/CPU87.h | 9 --------- include/configs/CRAYL1.h | 8 -------- include/configs/CU824.h | 8 -------- include/configs/DASA_SIM.h | 9 --------- include/configs/DB64360.h | 8 -------- include/configs/DB64460.h | 8 -------- include/configs/DP405.h | 8 -------- include/configs/DU405.h | 9 --------- include/configs/DU440.h | 8 -------- include/configs/ELPPC.h | 8 -------- include/configs/ELPT860.h | 13 ------------- include/configs/EP88x.h | 8 -------- include/configs/ERIC.h | 8 -------- include/configs/ESTEEM192E.h | 18 ------------------ include/configs/ETX094.h | 9 --------- include/configs/EVB64260.h | 8 -------- include/configs/EXBITGEN.h | 8 -------- include/configs/FADS823.h | 8 -------- include/configs/FADS850SAR.h | 8 -------- include/configs/FLAGADM.h | 8 -------- include/configs/FPS850L.h | 9 --------- include/configs/FPS860L.h | 9 --------- include/configs/G2000.h | 8 -------- include/configs/GEN860T.h | 6 ------ include/configs/GENIETV.h | 8 -------- include/configs/HH405.h | 8 -------- include/configs/HIDDEN_DRAGON.h | 8 -------- include/configs/HMI10.h | 9 --------- include/configs/HUB405.h | 8 -------- include/configs/IAD210.h | 9 --------- include/configs/ICU862.h | 9 --------- include/configs/IDS8247.h | 9 --------- include/configs/IP860.h | 14 -------------- include/configs/IPHASE4539.h | 9 --------- include/configs/ISPAN.h | 8 -------- include/configs/IVML24.h | 9 --------- include/configs/IVMS8.h | 9 --------- include/configs/IceCube.h | 3 --- include/configs/JSE.h | 9 --------- include/configs/KAREF.h | 8 -------- include/configs/KUP4K.h | 9 --------- include/configs/KUP4X.h | 9 --------- include/configs/LANTEC.h | 8 -------- include/configs/MBX.h | 8 -------- include/configs/MBX860T.h | 8 -------- include/configs/METROBOX.h | 8 -------- include/configs/MHPC.h | 8 -------- include/configs/MIP405.h | 9 --------- include/configs/ML2.h | 8 -------- include/configs/MOUSSE.h | 9 --------- include/configs/MPC8260ADS.h | 3 --- include/configs/MPC8266ADS.h | 3 --- include/configs/MPC8308RDB.h | 8 -------- include/configs/MPC8313ERDB.h | 8 -------- include/configs/MPC8315ERDB.h | 8 -------- include/configs/MPC8323ERDB.h | 8 -------- include/configs/MPC832XEMDS.h | 8 -------- include/configs/MPC8349EMDS.h | 8 -------- include/configs/MPC8349ITX.h | 8 -------- include/configs/MPC8360EMDS.h | 8 -------- include/configs/MPC8360ERDK.h | 8 -------- include/configs/MPC837XEMDS.h | 8 -------- include/configs/MPC837XERDB.h | 8 -------- include/configs/MPC8536DS.h | 8 -------- include/configs/MPC8540ADS.h | 8 -------- include/configs/MPC8540EVAL.h | 8 -------- include/configs/MPC8541CDS.h | 8 -------- include/configs/MPC8544DS.h | 8 -------- include/configs/MPC8548CDS.h | 8 -------- include/configs/MPC8555CDS.h | 8 -------- include/configs/MPC8560ADS.h | 8 -------- include/configs/MPC8568MDS.h | 8 -------- include/configs/MPC8569MDS.h | 8 -------- include/configs/MPC8572DS.h | 8 -------- include/configs/MPC8610HPCD.h | 8 -------- include/configs/MPC8641HPCN.h | 8 -------- include/configs/MUSENKI.h | 8 -------- include/configs/MVBC_P.h | 3 --- include/configs/MVBLM7.h | 9 --------- include/configs/MVBLUE.h | 9 --------- include/configs/MVS1.h | 9 --------- include/configs/MVSMR.h | 3 --- include/configs/NC650.h | 8 -------- include/configs/NETPHONE.h | 8 -------- include/configs/NETTA.h | 8 -------- include/configs/NETTA2.h | 8 -------- include/configs/NETVIA.h | 8 -------- include/configs/NSCU.h | 9 --------- include/configs/NX823.h | 9 --------- include/configs/OCRTC.h | 9 --------- include/configs/ORSG.h | 9 --------- include/configs/OXC.h | 9 --------- include/configs/P1022DS.h | 8 -------- include/configs/P1_P2_RDB.h | 8 -------- include/configs/P2020DS.h | 8 -------- include/configs/P3G4.h | 8 -------- include/configs/PATI.h | 10 ---------- include/configs/PCI405.h | 8 -------- include/configs/PCIPPC2.h | 8 -------- include/configs/PCIPPC6.h | 8 -------- include/configs/PIP405.h | 9 --------- include/configs/PLU405.h | 8 -------- include/configs/PM520.h | 3 --- include/configs/PM826.h | 9 --------- include/configs/PM828.h | 9 --------- include/configs/PM854.h | 8 -------- include/configs/PM856.h | 8 -------- include/configs/PMC405.h | 8 -------- include/configs/PMC440.h | 8 -------- include/configs/PN62.h | 10 ---------- include/configs/PPChameleonEVB.h | 9 --------- include/configs/QS823.h | 8 -------- include/configs/QS850.h | 8 -------- include/configs/QS860T.h | 9 --------- include/configs/R360MPI.h | 9 --------- include/configs/RBC823.h | 9 --------- include/configs/RPXClassic.h | 9 --------- include/configs/RPXlite.h | 9 --------- include/configs/RPXlite_DW.h | 8 -------- include/configs/RPXsuper.h | 8 -------- include/configs/RRvision.h | 8 -------- include/configs/Rattler.h | 3 --- include/configs/SBC8540.h | 8 -------- include/configs/SCM.h | 9 --------- include/configs/SIMPC8313.h | 8 -------- include/configs/SM850.h | 9 --------- include/configs/SPD823TS.h | 8 -------- include/configs/SXNI855T.h | 7 ------- include/configs/Sandpoint8240.h | 10 ---------- include/configs/Sandpoint8245.h | 10 ---------- include/configs/TB5200.h | 3 --- include/configs/TK885D.h | 8 -------- include/configs/TOP5200.h | 3 --- include/configs/TOP860.h | 8 -------- include/configs/TQM5200.h | 3 --- include/configs/TQM823L.h | 9 --------- include/configs/TQM823M.h | 9 --------- include/configs/TQM8260.h | 9 --------- include/configs/TQM8272.h | 8 -------- include/configs/TQM834x.h | 8 -------- include/configs/TQM850L.h | 9 --------- include/configs/TQM850M.h | 9 --------- include/configs/TQM855L.h | 9 --------- include/configs/TQM855M.h | 9 --------- include/configs/TQM85xx.h | 8 -------- include/configs/TQM860L.h | 9 --------- include/configs/TQM860M.h | 8 -------- include/configs/TQM862L.h | 9 --------- include/configs/TQM862M.h | 9 --------- include/configs/TQM866M.h | 8 -------- include/configs/TQM885D.h | 8 -------- include/configs/Total5200.h | 3 --- include/configs/VOH405.h | 8 -------- include/configs/VOM405.h | 8 -------- include/configs/VoVPN-GW.h | 4 ---- include/configs/W7OLMC.h | 9 --------- include/configs/W7OLMG.h | 9 --------- include/configs/WUH405.h | 8 -------- include/configs/XPEDITE1000.h | 6 ------ include/configs/XPEDITE5170.h | 6 ------ include/configs/XPEDITE5200.h | 6 ------ include/configs/XPEDITE5370.h | 6 ------ include/configs/Yukon8220.h | 3 --- include/configs/ZPC1900.h | 3 --- include/configs/ZUMA.h | 8 -------- include/configs/aev.h | 3 --- include/configs/alpr.h | 8 -------- include/configs/aria.h | 8 -------- include/configs/atc.h | 8 -------- include/configs/barco.h | 9 --------- include/configs/c2mon.h | 9 --------- include/configs/canmb.h | 3 --- include/configs/cm5200.h | 3 --- include/configs/cmi_mpc5xx.h | 9 --------- include/configs/cogent_mpc8260.h | 9 --------- include/configs/cogent_mpc8xx.h | 9 --------- include/configs/corenet_ds.h | 8 -------- include/configs/cpci5200.h | 3 --- include/configs/csb272.h | 9 --------- include/configs/csb472.h | 9 --------- include/configs/debris.h | 10 ---------- include/configs/digsy_mtc.h | 3 --- include/configs/eXalion.h | 10 ---------- include/configs/ep8248.h | 3 --- include/configs/ep8260.h | 8 -------- include/configs/ep82xxm.h | 3 --- include/configs/galaxy5200.h | 2 -- include/configs/gw8260.h | 9 --------- include/configs/hermes.h | 9 --------- include/configs/hmi1001.h | 3 --- include/configs/hymod.h | 8 -------- include/configs/inka4x0.h | 3 --- include/configs/ipek01.h | 3 --- include/configs/jupiter.h | 3 --- include/configs/km8xx.h | 8 -------- include/configs/kmeter1.h | 8 -------- include/configs/korat.h | 8 -------- include/configs/kvme080.h | 3 --- include/configs/linkstation.h | 8 -------- include/configs/lwmon.h | 8 -------- include/configs/lwmon5.h | 8 -------- include/configs/manroland/common.h | 3 --- include/configs/mcc200.h | 3 --- include/configs/mecp5123.h | 8 -------- include/configs/mecp5200.h | 3 --- include/configs/mgcoge.h | 3 --- include/configs/motionpro.h | 3 --- include/configs/mpc5121ads.h | 8 -------- include/configs/mpc7448hpc2.h | 8 -------- include/configs/muas3001.h | 3 --- include/configs/munices.h | 2 -- include/configs/o2dnt.h | 3 --- include/configs/p3mx.h | 8 -------- include/configs/p3p440.h | 8 -------- include/configs/pcm030.h | 2 -- include/configs/pcs440ep.h | 8 -------- include/configs/pcu_e.h | 8 -------- include/configs/pdm360ng.h | 8 -------- include/configs/pf5200.h | 3 --- include/configs/ppmc7xx.h | 12 ------------ include/configs/ppmc8260.h | 9 --------- include/configs/quantum.h | 8 -------- include/configs/rmu.h | 8 -------- include/configs/rsdproto.h | 8 -------- include/configs/sacsng.h | 8 -------- include/configs/sbc405.h | 8 -------- include/configs/sbc8240.h | 8 -------- include/configs/sbc8260.h | 9 --------- include/configs/sbc8349.h | 8 -------- include/configs/sbc8548.h | 8 -------- include/configs/sbc8560.h | 8 -------- include/configs/sbc8641d.h | 8 -------- include/configs/sc3.h | 8 -------- include/configs/smmaco4.h | 3 --- include/configs/socrates.h | 8 -------- include/configs/sorcery.h | 3 --- include/configs/spc1920.h | 8 -------- include/configs/spieval.h | 3 --- include/configs/stxgp3.h | 8 -------- include/configs/stxssa.h | 8 -------- include/configs/stxxtc.h | 8 -------- include/configs/svm_sc8xx.h | 9 --------- include/configs/uc100.h | 8 -------- include/configs/utx8245.h | 9 --------- include/configs/v37.h | 8 -------- include/configs/v38b.h | 3 --- include/configs/ve8313.h | 8 -------- include/configs/virtlab2.h | 9 --------- include/configs/vme8349.h | 8 -------- include/configs/zeus.h | 8 -------- 288 files changed, 15 insertions(+), 2099 deletions(-)
arch/powerpc/cpu/74xx_7xx/start.S +1 -0
@@ -42,6 +42,7 @@ #include <asm/cache.h> #include <asm/mmu.h> +#include <asm/u-boot.h> #if !defined(CONFIG_DB64360) && \ !defined(CONFIG_DB64460) && \
arch/powerpc/cpu/mpc512x/start.S +1 -0
@@ -43,6 +43,7 @@ #include <asm/cache.h> #include <asm/mmu.h> +#include <asm/u-boot.h> #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING "MPC512X"
arch/powerpc/cpu/mpc5xx/start.S +1 -0
@@ -43,6 +43,7 @@ #include <linux/config.h> #include <asm/processor.h> +#include <asm/u-boot.h> #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING ""
arch/powerpc/cpu/mpc5xxx/start.S +1 -0
@@ -38,6 +38,7 @@ #include <asm/cache.h> #include <asm/mmu.h> +#include <asm/u-boot.h> #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING ""
arch/powerpc/cpu/mpc8220/start.S +1 -0
@@ -37,6 +37,7 @@ #include <asm/cache.h> #include <asm/mmu.h> +#include <asm/u-boot.h> #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING ""
arch/powerpc/cpu/mpc824x/start.S +1 -0
@@ -49,6 +49,7 @@ #include <asm/cache.h> #include <asm/mmu.h> +#include <asm/u-boot.h> #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING ""
arch/powerpc/cpu/mpc8260/start.S +1 -0
@@ -38,6 +38,7 @@ #include <asm/cache.h> #include <asm/mmu.h> +#include <asm/u-boot.h> #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING ""
arch/powerpc/cpu/mpc83xx/start.S +1 -0
@@ -40,6 +40,7 @@ #include <asm/cache.h> #include <asm/mmu.h> +#include <asm/u-boot.h> #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING "MPC83XX"
arch/powerpc/cpu/mpc86xx/start.S +1 -0
@@ -40,6 +40,7 @@ #include <asm/cache.h> #include <asm/mmu.h> +#include <asm/u-boot.h> #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING ""
arch/powerpc/cpu/mpc8xx/start.S +1 -0
@@ -50,6 +50,7 @@ #include <asm/cache.h> #include <asm/mmu.h> +#include <asm/u-boot.h> #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING ""
arch/powerpc/include/asm/u-boot.h +5 -0
@@ -143,4 +143,9 @@ typedef struct bd_info { } bd_t;#endif /* __ASSEMBLY__ */ + +/* bi_bootflags values */ +#define BOOTFLAG_COLD 0x1/* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x2/* Software reboot */ +#endif /* __U_BOOT_H__ */
board/fads/fads.h +0 -8
@@ -351,14 +351,6 @@#define CONFIG_SYS_OR1_PRELIM 0xFFFF8110/* 64Kbyte address space */ #define CONFIG_SYS_BR1_PRELIM ((BCSR_ADDR) | BR_V) -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -/* values according to the manual */ #define BCSR0 ((uint) (BCSR_ADDR + 0x00))
include/configs/A3000.h +0 -8
@@ -310,12 +310,4 @@# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */ #endif -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/ADCIOP.h +0 -9
@@ -200,13 +200,4 @@#define FLASH_BASE0_PRELIM 0xFFC00000/* FLASH bank #0 */ #define FLASH_BASE1_PRELIM 0xFFE00000/* FLASH bank #1 */ - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/AMX860.h +0 -8
@@ -297,12 +297,4 @@#define CONFIG_SYS_OR6_PRELIM 0xFFFF8000/* 32kB, 15 waits, cs after addr, no bursts */ #define CONFIG_SYS_BR6_PRELIM 0x60000401/* use GPCM for CS generation, 8 bit port */ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/AP1000.h +0 -8
@@ -219,14 +219,6 @@*/ #define SPD_EEPROM_ADDRESS 0x50 -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/APC405.h +0 -8
@@ -428,14 +428,6 @@ extern int flash_banks;#endif /* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* * PCI OHCI controller */ #define CONFIG_USB_OHCI_NEW 1
include/configs/AR405.h +0 -8
@@ -263,12 +263,4 @@#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/ASH405.h +0 -8
@@ -346,14 +346,6 @@#define CONFIG_SYS_DUART_RST (0x80000000 >> 14)/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* * Default speed selection (cpu_plb_opb_ebc) in mhz. * This value will be set if iic boot eprom is disabled. */
include/configs/ATUM8548.h +0 -8
@@ -379,14 +379,6 @@*/ #define CONFIG_SYS_BOOTMAPSZ (8 << 20)/* Initial Memory map for Linux*/ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/Adder.h +0 -8
@@ -207,14 +207,6 @@*/ #define CONFIG_SYS_CACHELINE_SIZE 16/* For all MPC8xx chips */ -/*----------------------------------------------------------------------- -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from flash */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -/* pass open firmware flat tree */ #define CONFIG_OF_LIBFDT 1#define CONFIG_OF_BOARD_SETUP 1
include/configs/Alaska8220.h +0 -3
@@ -38,9 +38,6 @@#define CONFIG_SYS_MPC8220_CLKIN 30000000/* ... running at 30MHz */ #define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 16/* VCO multiplier can't be read from any register */ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -/* * Serial console configuration */
include/configs/BAB7xx.h +0 -9
@@ -465,15 +465,6 @@ extern unsigned long bab7xx_get_gclk_freq (void);#define CONFIG_SYS_L2_BAB7xx -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -#define CONFIG_NET_MULTI /* Multi ethernet cards support */ #define CONFIG_TULIP #define CONFIG_TULIP_SELECT_MEDIA
include/configs/BC3450.h +0 -3
@@ -58,9 +58,6 @@#define CONFIG_SYS_MPC5XXX_CLKIN 33000000/* ... [email protected] */ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_HIGH_BATS 1/* High BATs supported */ /*
include/configs/BMW.h +0 -9
@@ -300,13 +300,4 @@# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */ #endif -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -#endif /* __CONFIG_H */
include/configs/CANBT.h +0 -9
@@ -220,13 +220,4 @@#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/CATcenter.h +0 -9
@@ -544,15 +544,6 @@#define CONFIG_SYS_GPIO0_TSRL 0x00000000#define CONFIG_SYS_GPIO0_TCR 0xF7FF8014 -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -#define CONFIG_NO_SERIAL_EEPROM /*--------------------------------------------------------------------*/
include/configs/CCM.h +0 -9
@@ -476,13 +476,4 @@ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/CMS700.h +0 -8
@@ -313,14 +313,6 @@#define CONFIG_SYS_PLD_RESET (0x80000000 >> 12)/* GPIO12 */ /* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* * Default speed selection (cpu_plb_opb_ebc) in mhz. * This value will be set if iic boot eprom is disabled. */
include/configs/CPC45.h +0 -9
@@ -338,15 +338,6 @@# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */ #endif -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -#define SRAM_BASE 0x80000000/* SRAM base address */ #define SRAM_END 0x801FFFFF
include/configs/CPCI2DP.h +0 -8
@@ -265,12 +265,4 @@#define CONFIG_SYS_PB_LED (0x80000000 >> 16)/* GPIO16 */ #define CONFIG_SYS_INTA_FAKE (0x80000000 >> 23)/* GPIO23 */ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/CPCI405.h +0 -9
@@ -332,13 +332,4 @@#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/CPCI4052.h +0 -9
@@ -393,13 +393,4 @@#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/CPCI405AB.h +0 -9
@@ -385,13 +385,4 @@#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/CPCI405DT.h +0 -8
@@ -388,12 +388,4 @@#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/CPCI750.h +0 -8
@@ -616,14 +616,6 @@#define L2_ENABLE (L2_INIT | L2CR_L2E) -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_SYS_BOARD_ASM_INIT 1#define CPCI750_SLAVE_TEST (((in8(0xf0300000) & 0x80) == 0) ? 0 : 1)
include/configs/CPCIISER4.h +0 -8
@@ -246,12 +246,4 @@#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/CPU86.h +0 -9
@@ -333,15 +333,6 @@#define CONFIG_ENV_SIZE (2048 - 512)#endif -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH*/ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/*----------------------------------------------------------------------- * Cache Configuration */
include/configs/CPU87.h +0 -9
@@ -354,15 +354,6 @@#define CONFIG_ENV_SIZE (2048 - 512)#endif -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH*/ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/*----------------------------------------------------------------------- * Cache Configuration */
include/configs/CRAYL1.h +0 -8
@@ -235,12 +235,4 @@#define EEPROM_WRITE_ADDRESS 0xA0#define EEPROM_READ_ADDRESS 0xA1 -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/CU824.h +0 -8
@@ -290,14 +290,6 @@# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */ #endif -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -/*----------------------------------------------------------------------- * PCI stuff *-----------------------------------------------------------------------
include/configs/DASA_SIM.h +0 -9
@@ -190,13 +190,4 @@#define FLASH_BASE0_PRELIM 0xFFE00000/* FLASH bank #0 */ - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/DB64360.h +0 -8
@@ -593,14 +593,6 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"#define L2_ENABLE (L2_INIT | L2CR_L2E) -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_SYS_BOARD_ASM_INIT 1#endif /* __CONFIG_H */
include/configs/DB64460.h +0 -8
@@ -531,14 +531,6 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"#define L2_ENABLE (L2_INIT | L2CR_L2E) -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_SYS_BOARD_ASM_INIT 1#endif /* __CONFIG_H */
include/configs/DP405.h +0 -8
@@ -252,14 +252,6 @@#define CONFIG_SYS_GPIO0_TCR 0xB7FE0014/* 0 ... 31 */ /* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* * Default speed selection (cpu_plb_opb_ebc) in mhz. * This value will be set if iic boot eprom is disabled. */
include/configs/DU405.h +0 -9
@@ -304,13 +304,4 @@#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/DU440.h +0 -8
@@ -416,14 +416,6 @@ int du440_phy_addr(int devnum);#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND0_ADDR + CONFIG_SYS_NAND0_CS, \ CONFIG_SYS_NAND1_ADDR + CONFIG_SYS_NAND1_CS} -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/ELPPC.h +0 -8
@@ -347,14 +347,6 @@#endif #define L2_ENABLE (L2_INIT | L2CR_L2E) -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_NET_MULTI /* Multi ethernet cards support */ #define CONFIG_EEPRO100 #define CONFIG_SYS_RX_ETH_BUFFER 8/* use 8 rx buffer on eepro100 */
include/configs/ELPT860.h +0 -13
@@ -386,17 +386,4 @@ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) -/*----------------------------------------------------------------------- -* Internal Definitions -*----------------------------------------------------------------------- -* -*/ - -/* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -#endif /* __CONFIG_H */
include/configs/EP88x.h +0 -8
@@ -205,12 +205,4 @@*/ #define CONFIG_SYS_CACHELINE_SIZE 16/* For all MPC8xx chips */ -/*----------------------------------------------------------------------- -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from flash */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/ERIC.h +0 -8
@@ -355,14 +355,6 @@*/ #define SPD_EEPROM_ADDRESS 0x50 -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/ESTEEM192E.h +0 -18
@@ -310,22 +310,4 @@#define CONFIG_SYS_MAMR_8COL 0x18803112#define CONFIG_SYS_MAMR_9COL 0x18803112/* same as 8 column because its just easier to port with*/ - -/* -* Internal Definitions -* -* Boot Flags -*/ - -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/ETX094.h +0 -9
@@ -355,13 +355,4 @@ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_1X) - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/EVB64260.h +0 -8
@@ -419,14 +419,6 @@#define L2_ENABLE (L2_INIT | L2CR_L2E) -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_SYS_BOARD_ASM_INIT 1
include/configs/EXBITGEN.h +0 -8
@@ -205,14 +205,6 @@#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/FADS823.h +0 -8
@@ -340,14 +340,6 @@MAMR_AMA_TYPE_1 |MAMR_DSA_1_CYCL |MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) -#define CONFIG_SYS_MAMR 0x13a01114 -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ /* values according to the manual */
include/configs/FADS850SAR.h +0 -8
@@ -295,14 +295,6 @@ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)#define CONFIG_SYS_MAMR 0x13a01114 -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -/* values according to the manual */
include/configs/FLAGADM.h +0 -8
@@ -312,12 +312,4 @@#define CONFIG_SYS_OR4 ( OR_AM_MSK | OR_CSNT_SAM | OR_BI | OR_G5LS)#define CONFIG_SYS_BR4 ( (DSP_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_UPMB | BR_V ) -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/FPS850L.h +0 -9
@@ -428,15 +428,6 @@ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -/* pass open firmware flat tree */ #define CONFIG_OF_LIBFDT 1#define CONFIG_OF_BOARD_SETUP 1
include/configs/FPS860L.h +0 -9
@@ -428,15 +428,6 @@ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_SCC1_ENET /* pass open firmware flat tree */
include/configs/G2000.h +0 -8
@@ -376,14 +376,6 @@#define CONFIG_SYS_GPIO0_TCR 0xF7FF8014/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* * Default speed selection (cpu_plb_opb_ebc) in mhz. * This value will be set if iic boot eprom is disabled. */
include/configs/GEN860T.h +0 -6
@@ -725,12 +725,6 @@ )/* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* * FEC interrupt assignment */ #define FEC_INTERRUPT SIU_LEVEL1
include/configs/GENIETV.h +0 -8
@@ -331,14 +331,6 @@ MAMR_G0CLA_A11 | MAMR_RLFA_1X | MAMR_WLFA_1X \ | MAMR_TLFA_4X) /* 0x5d802114 */ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -/* values according to the manual */ #define CONFIG_DRAM_50MHZ 1
include/configs/HH405.h +0 -8
@@ -476,14 +476,6 @@#define CONFIG_SYS_LCD1_RST (0x80000000 >> 31)/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* * Default speed selection (cpu_plb_opb_ebc) in mhz. * This value will be set if iic boot eprom is disabled. */
include/configs/HIDDEN_DRAGON.h +0 -8
@@ -376,14 +376,6 @@# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */ #endif -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -/* values according to the manual */ #define CONFIG_DRAM_50MHZ 1#define CONFIG_SDRAM_50MHZ
include/configs/HMI10.h +0 -9
@@ -487,15 +487,6 @@ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -/* pass open firmware flat tree */ #define CONFIG_OF_LIBFDT 1#define CONFIG_OF_BOARD_SETUP 1
include/configs/HUB405.h +0 -8
@@ -349,14 +349,6 @@#define CONFIG_SYS_UART5_RS232 (0x80000000 >> 8)/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* * Default speed selection (cpu_plb_opb_ebc) in mhz. * This value will be set if iic boot eprom is disabled. */
include/configs/IAD210.h +0 -9
@@ -370,15 +370,6 @@ MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_8X) - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#ifdef CONFIG_MPC860T /* Interrupt level assignments.
include/configs/ICU862.h +0 -9
@@ -447,15 +447,6 @@ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) -#define CONFIG_SYS_MAMR 0x13a01114 -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#ifdef CONFIG_MPC860T /* Interrupt level assignments.
include/configs/IDS8247.h +0 -9
@@ -310,15 +310,6 @@#define CONFIG_SYS_MONITOR_LEN (256 << 10)/* Reserve 256 kB for Monitor */ #define CONFIG_SYS_MALLOC_LEN (128 << 10)/* Reserve 128 kB for malloc()*/ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH*/ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/*----------------------------------------------------------------------- * Cache Configuration */
include/configs/IP860.h +0 -14
@@ -453,18 +453,4 @@ typedef struct ip860_bcsr_s {#define BD_CTRL_FLWE 0x20/* Flash Write Enable */ #define BD_CTRL_RWDN 0x10/* VMEBus Requester Release When Done Enable */ -/*----------------------------------------------------------------------- -* -*----------------------------------------------------------------------- -* -*/ - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/IPHASE4539.h +0 -9
@@ -250,15 +250,6 @@#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET/*----------------------------------------------------------------------- -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - - -/*----------------------------------------------------------------------- * Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC8260 CPU */
include/configs/ISPAN.h +0 -8
@@ -235,14 +235,6 @@#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET/*----------------------------------------------------------------------- -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from flash */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/*----------------------------------------------------------------------- * Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC8260 CPU */
include/configs/IVML24.h +0 -9
@@ -473,13 +473,4 @@ MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 | \ MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)#endif - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/IVMS8.h +0 -9
@@ -456,13 +456,4 @@ MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)#endif - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/IceCube.h +0 -3
@@ -35,9 +35,6 @@#define CONFIG_SYS_MPC5XXX_CLKIN 33000000/* ... running at 33.000000MHz */ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_HIGH_BATS 1/* High BATs supported */ /*
include/configs/JSE.h +0 -9
@@ -295,15 +295,6 @@/* Configuration Port location */ #define CONFIG_PORT_ADDR 0xF0000500 - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/KAREF.h +0 -8
@@ -284,14 +284,6 @@*/ #define CONFIG_SYS_BOOTMAPSZ (8 << 20)/* Initial Memory map for Linux */ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal PowerOn: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* kgdb serial port baud */ #define CONFIG_KGDB_SER_INDEX 2/* kgdb serial port */
include/configs/KUP4K.h +0 -9
@@ -495,15 +495,6 @@#define LATCH_ADDR 0x90000200 -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */ #define CONFIG_AUTOBOOT_STOP_STR "."#define CONFIG_SILENT_CONSOLE 1
include/configs/KUP4X.h +0 -9
@@ -446,15 +446,6 @@#define LATCH_ADDR 0x90000200 -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */ #define CONFIG_AUTOBOOT_STOP_STR "."/* easy to stop for now */
include/configs/LANTEC.h +0 -8
@@ -340,14 +340,6 @@ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* * JFFS2 partitions * */
include/configs/MBX.h +0 -8
@@ -310,12 +310,4 @@*/ #define CONFIG_SYS_DER 0 -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/MBX860T.h +0 -8
@@ -282,14 +282,6 @@ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)#define CONFIG_SYS_MAMR 0x13821000 -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -/* values according to the manual */
include/configs/METROBOX.h +0 -8
@@ -349,14 +349,6 @@*/ #define CONFIG_SYS_BOOTMAPSZ (8 << 20)/* Initial Memory map for Linux */ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal PowerOn: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* kgdb serial port baud */ #define CONFIG_KGDB_SER_INDEX 2/* kgdb serial port */
include/configs/MHPC.h +0 -8
@@ -386,12 +386,4 @@*/ #define CONFIG_SYS_DER 0 -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/MIP405.h +0 -9
@@ -313,15 +313,6 @@#define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 12)#endif -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/*********************************************************************** * External peripheral base address ***********************************************************************/
include/configs/ML2.h +0 -8
@@ -231,14 +231,6 @@*/ #define SPD_EEPROM_ADDRESS 0x50 -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/MOUSSE.h +0 -9
@@ -312,15 +312,6 @@*/ #define CONFIG_SYS_CACHELINE_SIZE 16 - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -/* Localizations */ #if 0 #define CONFIG_ETHADDR 0:0:0:0:1:d
include/configs/MPC8260ADS.h +0 -3
@@ -373,9 +373,6 @@#define CONFIG_SYS_HRCW_SLAVE6 0#define CONFIG_SYS_HRCW_SLAVE7 0 -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_SYS_MONITOR_BASE TEXT_BASE#if (CONFIG_SYS_MONITOR_BASE <CONFIG_SYS_FLASH_BASE )# define CONFIG_SYS_RAMBOOT
include/configs/MPC8266ADS.h +0 -3
@@ -419,9 +419,6 @@#define CONFIG_SYS_HRCW_SLAVE6 0#define CONFIG_SYS_HRCW_SLAVE7 0 -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_SYS_MONITOR_BASE TEXT_BASE#if (CONFIG_SYS_MONITOR_BASE <CONFIG_SYS_FLASH_BASE )# define CONFIG_SYS_RAMBOOT
include/configs/MPC8308RDB.h +0 -8
@@ -491,14 +491,6 @@#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* * Environment Configuration */
include/configs/MPC8313ERDB.h +0 -8
@@ -570,14 +570,6 @@#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* * Environment Configuration */ #define CONFIG_ENV_OVERWRITE
include/configs/MPC8315ERDB.h +0 -8
@@ -598,14 +598,6 @@#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed of kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/MPC8323ERDB.h +0 -8
@@ -508,14 +508,6 @@#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if (CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed of kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/MPC832XEMDS.h +0 -8
@@ -527,14 +527,6 @@#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U#endif -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed of kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/MPC8349EMDS.h +0 -8
@@ -668,14 +668,6 @@#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed of kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/MPC8349ITX.h +0 -8
@@ -661,14 +661,6 @@ boards, we say we have two, but don't display a message if we find only one. */#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed of kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/MPC8360EMDS.h +0 -8
@@ -568,14 +568,6 @@#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U#endif -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed of kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/MPC8360ERDK.h +0 -8
@@ -485,14 +485,6 @@#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U#endif /* CONFIG_PCI */ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed of kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/MPC837XEMDS.h +0 -8
@@ -619,14 +619,6 @@ extern int board_pci_host_broken(void);#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U#endif -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed of kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/MPC837XERDB.h +0 -8
@@ -628,14 +628,6 @@#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U#endif -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed of kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/MPC8536DS.h +0 -8
@@ -708,14 +708,6 @@*/ #define CONFIG_SYS_BOOTMAPSZ (16 << 20)/* Initial Memory map for Linux */ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/MPC8540ADS.h +0 -8
@@ -421,14 +421,6 @@*/ #define CONFIG_SYS_BOOTMAPSZ (16 << 20)/* Initial Memory map for Linux*/ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/MPC8540EVAL.h +0 -8
@@ -331,14 +331,6 @@*/ #define CONFIG_SYS_BOOTMAPSZ (8 << 20)/* Initial Memory map for Linux */ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/MPC8541CDS.h +0 -8
@@ -437,14 +437,6 @@ extern unsigned long get_clock_freq(void);*/ #define CONFIG_SYS_BOOTMAPSZ (16 << 20)/* Initial Memory map for Linux*/ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/MPC8544DS.h +0 -8
@@ -452,14 +452,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);*/ #define CONFIG_SYS_BOOTMAPSZ (16 << 20)/* Initial Memory map for Linux*/ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/MPC8548CDS.h +0 -8
@@ -492,14 +492,6 @@ extern unsigned long get_clock_freq(void);*/ #define CONFIG_SYS_BOOTMAPSZ (16 << 20)/* Initial Memory map for Linux*/ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/MPC8555CDS.h +0 -8
@@ -435,14 +435,6 @@ extern unsigned long get_clock_freq(void);*/ #define CONFIG_SYS_BOOTMAPSZ (16 << 20)/* Initial Memory map for Linux*/ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/MPC8560ADS.h +0 -8
@@ -461,14 +461,6 @@*/ #define CONFIG_SYS_BOOTMAPSZ (16 << 20)/* Initial Memory map for Linux*/ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/MPC8568MDS.h +0 -8
@@ -452,14 +452,6 @@ extern unsigned long get_clock_freq(void);*/ #define CONFIG_SYS_BOOTMAPSZ (16 << 20)/* Initial Memory map for Linux*/ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/MPC8569MDS.h +0 -8
@@ -585,14 +585,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_SYS_BOOTMAPSZ (16 << 20)/* Initial Memory map for Linux*/ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/MPC8572DS.h +0 -8
@@ -602,14 +602,6 @@*/ #define CONFIG_SYS_BOOTMAPSZ (16 << 20)/* Initial Memory map for Linux*/ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/MPC8610HPCD.h +0 -8
@@ -517,14 +517,6 @@*/ #define CONFIG_SYS_BOOTMAPSZ (8 << 20)/* Initial Memory map for Linux*/ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/MPC8641HPCN.h +0 -8
@@ -675,14 +675,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);*/ #define CONFIG_SYS_BOOTMAPSZ (8 << 20)/* Initial Memory map for Linux*/ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/MUSENKI.h +0 -8
@@ -293,12 +293,4 @@# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */ #endif -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/MVBC_P.h +0 -3
@@ -34,9 +34,6 @@#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 -#define BOOTFLAG_COLD 0x01 -#define BOOTFLAG_WARM 0x02 -#define CONFIG_MISC_INIT_R 1#define CONFIG_SYS_CACHELINE_SIZE 32
include/configs/MVBLM7.h +0 -9
@@ -380,15 +380,6 @@#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - - -/* * Environment Configuration */ #define CONFIG_ENV_OVERWRITE
include/configs/MVBLUE.h +0 -9
@@ -340,13 +340,4 @@#if defined(CONFIG_CMD_KGDB )#define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */ #endif - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/MVS1.h +0 -9
@@ -406,13 +406,4 @@ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A7 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/MVSMR.h +0 -3
@@ -34,9 +34,6 @@#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 -#define BOOTFLAG_COLD 0x01 -#define BOOTFLAG_WARM 0x02 -#define CONFIG_MISC_INIT_R 1#define CONFIG_SYS_CACHELINE_SIZE 32
include/configs/NC650.h +0 -8
@@ -424,14 +424,6 @@#define CONFIG_SYS_MBMR_NAND ( MBMR_WLFB_5X ) -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_JFFS2_NAND 1/* jffs2 on nand support */ #define NAND_CACHE_PAGES 16/* size of nand cache in 512 bytes pages */
include/configs/NETPHONE.h +0 -8
@@ -478,14 +478,6 @@ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_LAST_STAGE_INIT /* needed to reset the damn phys */ /****************************************************************/
include/configs/NETTA.h +0 -8
@@ -487,14 +487,6 @@ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_LAST_STAGE_INIT /* needed to reset the damn phys */ /***********************************************************************************************************
include/configs/NETTA2.h +0 -8
@@ -479,14 +479,6 @@ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_LAST_STAGE_INIT /* needed to reset the damn phys */ /****************************************************************/
include/configs/NETVIA.h +0 -8
@@ -346,14 +346,6 @@ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -/* Ethernet@SCC2 */ #define CONFIG_SCC2_ENET
include/configs/NSCU.h +0 -9
@@ -474,15 +474,6 @@ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#undef CONFIG_SCC1_ENET#define CONFIG_FEC_ENET
include/configs/NX823.h +0 -9
@@ -356,15 +356,6 @@ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_ENV_OVERWRITE /* allow changes to ethaddr (for now) */ #define CONFIG_ETHADDR 00:10:20:30:40:50#define CONFIG_IPADDR 10.77.77.20
include/configs/OCRTC.h +0 -9
@@ -294,13 +294,4 @@#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/ORSG.h +0 -9
@@ -292,13 +292,4 @@#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/OXC.h +0 -9
@@ -314,13 +314,4 @@#if defined(CONFIG_CMD_KGDB )# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */ #endif - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/P1022DS.h +0 -8
@@ -387,14 +387,6 @@*/ #define CONFIG_SYS_BOOTMAPSZ (16 << 20)/* Initial Memory map for Linux*/ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/P1_P2_RDB.h +0 -8
@@ -539,14 +539,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);*/ #define CONFIG_SYS_BOOTMAPSZ (16 << 20)/* Initial Memory map for Linux*/ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/P2020DS.h +0 -8
@@ -606,14 +606,6 @@*/ #define CONFIG_SYS_BOOTMAPSZ (16 << 20)/* Initial Memory map for Linux*/ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/P3G4.h +0 -8
@@ -421,14 +421,6 @@#define L2_ENABLE (L2_INIT | L2CR_L2E) -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_SYS_BOARD_ASM_INIT 1
include/configs/PATI.h +0 -10
@@ -283,16 +283,6 @@*/ #define CONFIG_SYS_DER 0x00000000 - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -#define VERSION_TAG "released"#define CONFIG_ISO_STRING "MEV-10084-001"
include/configs/PCI405.h +0 -8
@@ -305,12 +305,4 @@#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/PCIPPC2.h +0 -8
@@ -238,14 +238,6 @@ L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)#define L2_ENABLE (L2_INIT | L2CR_L2E) -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -/*----------------------------------------------------------------------- RTC m48t59 */
include/configs/PCIPPC6.h +0 -8
@@ -240,14 +240,6 @@ L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)#define L2_ENABLE (L2_INIT | L2CR_L2E) -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -/*----------------------------------------------------------------------- RTC m48t59 */
include/configs/PIP405.h +0 -9
@@ -254,15 +254,6 @@#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/*********************************************************************** * External peripheral base address ***********************************************************************/
include/configs/PLU405.h +0 -8
@@ -391,14 +391,6 @@#define CONFIG_SYS_EEPROM_WP (0x80000000 >> 0)/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* * Default speed selection (cpu_plb_opb_ebc) in MHz. * This value will be set if iic boot eprom is disabled. */
include/configs/PM520.h +0 -3
@@ -37,9 +37,6 @@#define CONFIG_MISC_INIT_R -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_HIGH_BATS 1/* High BATs supported */ /*
include/configs/PM826.h +0 -9
@@ -318,15 +318,6 @@#define CONFIG_SYS_RX_ETH_BUFFER 8/* use 8 rx buffer on eepro100 */ #endif -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH*/ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/*----------------------------------------------------------------------- * Cache Configuration */
include/configs/PM828.h +0 -9
@@ -312,15 +312,6 @@#define CONFIG_SYS_RX_ETH_BUFFER 8/* use 8 rx buffer on eepro100 */ #endif -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH*/ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/*----------------------------------------------------------------------- * Cache Configuration */
include/configs/PM854.h +0 -8
@@ -366,14 +366,6 @@*/ #define CONFIG_SYS_BOOTMAPSZ (8 << 20)/* Initial Memory map for Linux*/ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/PM856.h +0 -8
@@ -365,14 +365,6 @@*/ #define CONFIG_SYS_BOOTMAPSZ (8 << 20)/* Initial Memory map for Linux*/ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/PMC405.h +0 -8
@@ -328,14 +328,6 @@ CONFIG_SYS_GBL_DATA_SIZE)#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_OF_LIBFDT #define CONFIG_OF_BOARD_SETUP
include/configs/PMC440.h +0 -8
@@ -503,14 +503,6 @@#define CONFIG_SYS_NAND_SELECT_DEVICE 1/* nand driver supports mutipl. chips */ #define CONFIG_SYS_NAND_QUIET_TEST 1 -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/PN62.h +0 -10
@@ -301,14 +301,4 @@# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */ #endif - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -#endif /* __CONFIG_H */
include/configs/PPChameleonEVB.h +0 -9
@@ -551,15 +551,6 @@#define CONFIG_SYS_GPIO0_TSRL 0x00000000#define CONFIG_SYS_GPIO0_TCR 0xF7FF8014 -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -#define CONFIG_NO_SERIAL_EEPROM /*--------------------------------------------------------------------*/
include/configs/QS823.h +0 -8
@@ -563,14 +563,6 @@ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)#define CONFIG_SYS_BR7_PRELIM 0xF0700000/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* * Sanity checks */ #if defined(CONFIG_SCC1_ENET ) && defined(CONFIG_FEC_ENET )
include/configs/QS850.h +0 -8
@@ -563,14 +563,6 @@ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)#define CONFIG_SYS_BR7_PRELIM 0xF0700000/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* * Sanity checks */ #if defined(CONFIG_SCC1_ENET ) && defined(CONFIG_FEC_ENET )
include/configs/QS860T.h +0 -9
@@ -400,15 +400,6 @@ CONFIG_SPI/* #define CONFIG_SYS_OR7 0xFF000000 */ /* #define CONFIG_SYS_BR7 0xE8000000 */ - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -/* * Sanity checks */
include/configs/R360MPI.h +0 -9
@@ -475,13 +475,4 @@ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/RBC823.h +0 -9
@@ -406,15 +406,6 @@MAMR_AMA_TYPE_1 |MAMR_DSA_1_CYCL |MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -/* * JFFS2 partitions *
include/configs/RPXClassic.h +0 -9
@@ -442,15 +442,6 @@MAMR_AMA_TYPE_2 |MAMR_DSA_1_CYCL |MAMR_G0CLA_A12 | \ MAMR_GPL_A4DIS | MAMR_RLFA_4X | MAMR_WLFA_3X | MAMR_TLFA_16X) -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */ /* Configuration variable added by yooth. */ /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
include/configs/RPXlite.h +0 -9
@@ -335,15 +335,6 @@MAMR_AMA_TYPE_2 |MAMR_DSA_1_CYCL |MAMR_G0CLA_A12 | \ MAMR_GPL_A4DIS | MAMR_RLFA_4X | MAMR_WLFA_3X | MAMR_TLFA_16X) -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */ /* Configuration variable added by yooth. */ /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
include/configs/RPXlite_DW.h +0 -8
@@ -414,14 +414,6 @@ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10)/* CONFIG_SYS_MAMR_9COL:0x20904000 @ 64MHz */ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */ /* Configuration variable added by yooth. */ /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
include/configs/RPXsuper.h +0 -8
@@ -504,12 +504,4 @@ ORxG_SCY_5_CLK |\ ORxG_TRLX) -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/RRvision.h +0 -8
@@ -468,12 +468,4 @@ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/Rattler.h +0 -3
@@ -262,9 +262,6 @@#define CONFIG_SYS_HRCW_SLAVE6 0#define CONFIG_SYS_HRCW_SLAVE7 0 -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_SYS_MALLOC_LEN (4096 << 10)/* Reserve 4 MB for malloc() */ #define CONFIG_SYS_BOOTMAPSZ (8 << 20)/* Initial Memory map for Linux */
include/configs/SBC8540.h +0 -8
@@ -421,14 +421,6 @@*/ #define CONFIG_SYS_BOOTMAPSZ (8 << 20)/* Initial Memory map for Linux */ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/SCM.h +0 -9
@@ -342,15 +342,6 @@#define CONFIG_SYS_MONITOR_LEN (256 << 10)/* Reserve 256 kB for Monitor */ #define CONFIG_SYS_MALLOC_LEN (128 << 10)/* Reserve 128 kB for malloc()*/ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH*/ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/*----------------------------------------------------------------------- * Hardware Information Block */
include/configs/SIMPC8313.h +0 -8
@@ -477,14 +477,6 @@#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* * Environment Configuration */ #define CONFIG_ENV_OVERWRITE
include/configs/SM850.h +0 -9
@@ -363,15 +363,6 @@ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -/* pass open firmware flat tree */ #define CONFIG_OF_LIBFDT 1#define CONFIG_OF_BOARD_SETUP 1
include/configs/SPD823TS.h +0 -8
@@ -417,12 +417,4 @@ MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 | \ MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X) -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/SXNI855T.h +0 -7
@@ -372,13 +372,6 @@#define DUART_BR5_VALUE ((CONFIG_SYS_DUARTA_BASE & BR_BA_MSK ) | DUART_BR_VALUE)#define DUART_BR6_VALUE ((CONFIG_SYS_DUARTB_BASE & BR_BA_MSK ) | DUART_BR_VALUE) -/********************************************************** -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_RESET_ON_PANIC /* reset if system panic() */ #define CONFIG_ENV_IS_IN_FLASH
include/configs/Sandpoint8240.h +0 -10
@@ -400,16 +400,6 @@# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */ #endif - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* values according to the manual */ #define CONFIG_DRAM_50MHZ 1
include/configs/Sandpoint8245.h +0 -10
@@ -378,16 +378,6 @@# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */ #endif - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* values according to the manual */ #define CONFIG_DRAM_50MHZ 1
include/configs/TB5200.h +0 -3
@@ -39,9 +39,6 @@#define CONFIG_SYS_MPC5XXX_CLKIN 33000000/* ... running at 33.000000MHz */ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_HIGH_BATS 1/* High BATs supported */ /*
include/configs/TK885D.h +0 -8
@@ -484,14 +484,6 @@ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* * Network configuration */ #define CONFIG_FEC_ENET /* enable ethernet on FEC */
include/configs/TOP5200.h +0 -3
@@ -47,9 +47,6 @@#define CONFIG_SYS_MPC5XXX_CLKIN 33000000/* ... running at 33.000000MHz */ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_HIGH_BATS 1/* High BATs supported */ /*
include/configs/TOP860.h +0 -8
@@ -246,14 +246,6 @@*/ #define FEC_INTERRUPT SIU_LEVEL1/* FEC interrupt */ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -/*----------------------------------------------------------------------- * Debug Enable Register *-----------------------------------------------------------------------
include/configs/TQM5200.h +0 -3
@@ -44,9 +44,6 @@#define CONFIG_SYS_MPC5XXX_CLKIN 33000000/* ... running at 33.000000MHz */ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_HIGH_BATS 1/* High BATs supported */ /*
include/configs/TQM823L.h +0 -9
@@ -481,15 +481,6 @@ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -/* pass open firmware flat tree */ #define CONFIG_OF_LIBFDT 1#define CONFIG_OF_BOARD_SETUP 1
include/configs/TQM823M.h +0 -9
@@ -477,15 +477,6 @@ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -/* pass open firmware flat tree */ #define CONFIG_OF_LIBFDT 1#define CONFIG_OF_BOARD_SETUP 1
include/configs/TQM8260.h +0 -9
@@ -379,15 +379,6 @@#define CONFIG_SYS_MONITOR_LEN (256 << 10)/* Reserve 256 kB for Monitor */ #define CONFIG_SYS_MALLOC_LEN (512 << 10)/* Reserve 512 kB for malloc()*/ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH*/ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/*----------------------------------------------------------------------- * Cache Configuration */
include/configs/TQM8272.h +0 -8
@@ -502,14 +502,6 @@#define CONFIG_SYS_MONITOR_LEN (192 << 10)/* Reserve 192 kB for Monitor */ #define CONFIG_SYS_MALLOC_LEN (128 << 10)/* Reserve 128 kB for malloc()*/ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH*/ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -/*----------------------------------------------------------------------- * Cache Configuration */
include/configs/TQM834x.h +0 -8
@@ -463,14 +463,6 @@ extern int tqm834x_num_flash_banks;#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed of kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/TQM850L.h +0 -9
@@ -466,15 +466,6 @@ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -/* pass open firmware flat tree */ #define CONFIG_OF_LIBFDT 1#define CONFIG_OF_BOARD_SETUP 1
include/configs/TQM850M.h +0 -9
@@ -466,15 +466,6 @@ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -/* pass open firmware flat tree */ #define CONFIG_OF_LIBFDT 1#define CONFIG_OF_BOARD_SETUP 1
include/configs/TQM855L.h +0 -9
@@ -470,15 +470,6 @@ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_SCC1_ENET #define CONFIG_FEC_ENET #define CONFIG_ETHPRIME "SCC"
include/configs/TQM855M.h +0 -9
@@ -505,15 +505,6 @@ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_SCC1_ENET #define CONFIG_FEC_ENET #define CONFIG_ETHPRIME "SCC"
include/configs/TQM85xx.h +0 -8
@@ -624,14 +624,6 @@*/ #define CONFIG_SYS_BOOTMAPSZ (8 << 20)/* Initial Memory map for Linux */ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port*/ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/TQM860L.h +0 -9
@@ -469,15 +469,6 @@ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_SCC1_ENET #define CONFIG_FEC_ENET #define CONFIG_ETHPRIME "SCC"
include/configs/TQM860M.h +0 -8
@@ -474,14 +474,6 @@ MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A9 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_SCC1_ENET #define CONFIG_FEC_ENET #define CONFIG_ETHPRIME "SCC"
include/configs/TQM862L.h +0 -9
@@ -474,15 +474,6 @@ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_NET_MULTI #define CONFIG_SCC1_ENET #define CONFIG_FEC_ENET
include/configs/TQM862M.h +0 -9
@@ -475,15 +475,6 @@ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_NET_MULTI #define CONFIG_SCC1_ENET #define CONFIG_FEC_ENET
include/configs/TQM866M.h +0 -8
@@ -496,14 +496,6 @@ MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A9 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_SCC1_ENET #define CONFIG_FEC_ENET #define CONFIG_ETHPRIME "SCC"
include/configs/TQM885D.h +0 -8
@@ -482,14 +482,6 @@ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* * Network configuration */ #define CONFIG_SCC2_ENET /* enable ethernet on SCC2 */
include/configs/Total5200.h +0 -3
@@ -46,9 +46,6 @@#define CONFIG_SYS_MPC5XXX_CLKIN 33000000/* ... [email protected] */ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_HIGH_BATS 1/* High BATs supported */ /*
include/configs/VOH405.h +0 -8
@@ -404,14 +404,6 @@#define CONFIG_SYS_EEPROM_WP (0x80000000 >> 0)/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* * Default speed selection (cpu_plb_opb_ebc) in mhz. * This value will be set if iic boot eprom is disabled. */
include/configs/VOM405.h +0 -8
@@ -282,14 +282,6 @@#define CONFIG_SYS_GPIO0_TCR 0xF7FE0014/* 0 ... 31 */ /* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* * Default speed selection (cpu_plb_opb_ebc) in mhz. * This value will be set if iic boot eprom is disabled. */
include/configs/VoVPN-GW.h +0 -4
@@ -313,10 +313,6 @@#define CONFIG_SYS_MONITOR_LEN 0x00020000#define CONFIG_SYS_MALLOC_LEN 0x00020000 -/* boot flags */ -#define BOOTFLAG_COLD 0x01/* normal power-on */ -#define BOOTFLAG_WARM 0x02/* software reboot */ -/* cache configuration */ #define CONFIG_SYS_CACHELINE_SIZE 32/* for MPC8260 */ #if defined(CONFIG_CMD_KGDB )
include/configs/W7OLMC.h +0 -9
@@ -310,15 +310,6 @@#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/W7OLMG.h +0 -9
@@ -313,15 +313,6 @@#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/WUH405.h +0 -8
@@ -343,14 +343,6 @@#define CONFIG_SYS_DUART_RST (0x80000000 >> 14)/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* * Default speed selection (cpu_plb_opb_ebc) in mhz. * This value will be set if iic boot eprom is disabled. */
include/configs/XPEDITE1000.h +0 -6
@@ -243,12 +243,6 @@ extern void out32(unsigned int, unsigned long);#define CONFIG_SYS_BOOTMAPSZ (8 << 20)/* Initial Memory map for Linux */ /* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* * Environment Configuration */ #define CONFIG_ENV_IS_IN_FLASH 1
include/configs/XPEDITE5170.h +0 -6
@@ -575,12 +575,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_SYS_BOOTM_LEN (16 << 20)/* Increase max gunzip size */ /* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* * Environment Configuration */ #define CONFIG_ENV_IS_IN_FLASH 1
include/configs/XPEDITE5200.h +0 -6
@@ -370,12 +370,6 @@#define CONFIG_SYS_BOOTM_LEN (16 << 20)/* Increase max gunzip size */ /* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* * Environment Configuration */ #define CONFIG_ENV_IS_IN_FLASH 1
include/configs/XPEDITE5370.h +0 -6
@@ -427,12 +427,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);#define CONFIG_SYS_BOOTM_LEN (16 << 20)/* Increase max gunzip size */ /* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* * Environment Configuration */ #define CONFIG_ENV_IS_IN_FLASH 1
include/configs/Yukon8220.h +0 -3
@@ -38,9 +38,6 @@#define CONFIG_SYS_MPC8220_CLKIN 30000000/* ... running at 30MHz */ #define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 16/* VCO multiplier can't be read from any register */ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -/* * Serial console configuration */
include/configs/ZPC1900.h +0 -3
@@ -212,9 +212,6 @@#define CONFIG_SYS_HRCW_SLAVE6 0#define CONFIG_SYS_HRCW_SLAVE7 0 -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_SYS_MONITOR_BASE TEXT_BASE#if (CONFIG_SYS_MONITOR_BASE <CONFIG_SYS_FLASH_BASE )#define CONFIG_SYS_RAMBOOT
include/configs/ZUMA.h +0 -8
@@ -387,12 +387,4 @@*/ #define CONFIG_GT_I2C -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/aev.h +0 -3
@@ -43,9 +43,6 @@#define CONFIG_HIGH_BATS 1/* High BATs supported */ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -/* * Serial console configuration */
include/configs/alpr.h +0 -8
@@ -359,14 +359,6 @@*/ #define CONFIG_SYS_BOOTMAPSZ (8 << 20)/* Initial Memory map for Linux */ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#if defined(CONFIG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/aria.h +0 -8
@@ -526,14 +526,6 @@#define CONFIG_HIGH_BATS 1/* High BATs supported */ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01 -#define BOOTFLAG_WARM 0x02 -#ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400/* speed of kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/atc.h +0 -8
@@ -280,14 +280,6 @@#define CONFIG_ENV_SIZE 2048#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4/* 16-byte page size */ #endif -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH*/ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -/*----------------------------------------------------------------------- * Cache Configuration
include/configs/barco.h +0 -9
@@ -351,15 +351,6 @@# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */ #endif - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -/* values according to the manual */ #define CONFIG_DRAM_50MHZ 1
include/configs/c2mon.h +0 -9
@@ -417,13 +417,4 @@ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/canmb.h +0 -3
@@ -35,9 +35,6 @@#define CONFIG_SYS_MPC5XXX_CLKIN 33000000/* ... running at 33.000000MHz */ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_HIGH_BATS 1/* High BATs supported */
include/configs/cm5200.h +0 -3
@@ -317,9 +317,6 @@#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI#define CONFIG_SYS_HID0_FINAL HID0_ICE -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_SYS_XLB_PIPELINING 1/* enable transaction pipeling */ /*
include/configs/cmi_mpc5xx.h +0 -9
@@ -267,13 +267,4 @@*/ #define CONFIG_SYS_DER 0x00000000 - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/cogent_mpc8260.h +0 -9
@@ -407,13 +407,4 @@#endif #endif - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH*/ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/cogent_mpc8xx.h +0 -9
@@ -364,13 +364,4 @@#define CONFIG_SYS_OR3_PRELIM ((~(CONFIG_SYS_CMA_CS3_SIZE-1)&OR_AM_MSK)|OR_BI|OR_SETA)#endif - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/corenet_ds.h +0 -8
@@ -579,14 +579,6 @@*/ #define CONFIG_SYS_BOOTMAPSZ (16 << 20)/* Initial Memory map for Linux*/ -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */
include/configs/cpci5200.h +0 -3
@@ -47,9 +47,6 @@#define CONFIG_SYS_MPC5XXX_CLKIN 33000000/* ... running at 33.000000MHz */ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_HIGH_BATS 1/* High BATs supported */ /*
include/configs/csb272.h +0 -9
@@ -297,13 +297,4 @@#define CONFIG_SYS_I2C_PLL_ADDR 0x58/* I2C address of AMIS FS6377-01 PLL */ #define CONFIG_I2CFAST 1/* enable "i2cfast" env. setting */ -/* -* Internal Definitions -* -* Boot Flags -* -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/csb472.h +0 -9
@@ -295,13 +295,4 @@*/ #define CONFIG_I2CFAST 1/* enable "i2cfast" env. setting */ -/* -* Internal Definitions -* -* Boot Flags -* -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/debris.h +0 -10
@@ -451,16 +451,6 @@# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */ #endif - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* values according to the manual */ #define CONFIG_DRAM_50MHZ 1
include/configs/digsy_mtc.h +0 -3
@@ -42,9 +42,6 @@#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 -#define BOOTFLAG_COLD 0x01 -#define BOOTFLAG_WARM 0x02 -#define CONFIG_SYS_CACHELINE_SIZE 32/*
include/configs/eXalion.h +0 -10
@@ -412,16 +412,6 @@# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */ #endif - -/*----------------------------------------------------------------------- -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* values according to the manual */ #define CONFIG_DRAM_50MHZ 1#define CONFIG_SDRAM_50MHZ
include/configs/ep8248.h +0 -3
@@ -232,9 +232,6 @@#define CONFIG_SYS_HRCW_SLAVE6 0#define CONFIG_SYS_HRCW_SLAVE7 0 -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_SYS_MALLOC_LEN (4096 << 10)/* Reserve 4 MB for malloc() */ #define CONFIG_SYS_BOOTMAPSZ (8 << 20)/* Initial Memory map for Linux */
include/configs/ep8260.h +0 -8
@@ -746,14 +746,6 @@#endif /* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/* * JFFS2 partitions * */
include/configs/ep82xxm.h +0 -3
@@ -361,9 +361,6 @@#define CONFIG_SYS_HRCW_SLAVE6 0#define CONFIG_SYS_HRCW_SLAVE7 0 -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_SYS_MALLOC_LEN (4096 << 10)/* Reserve 4 MB for malloc() */ #define CONFIG_SYS_BOOTMAPSZ (8 << 20)/* Initial Memory map for Linux */
include/configs/galaxy5200.h +0 -2
@@ -42,8 +42,6 @@#define CONFIG_MPC5xxx 1/* This is an MPC5xxx CPU */ #define CONFIG_MPC5200 1/* (more precisely an MPC5200 CPU) */ #define CONFIG_SYS_MPC5XXX_CLKIN 33333333/* ... running at 33.333333MHz */ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ /* * Serial console configuration
include/configs/gw8260.h +0 -9
@@ -819,13 +819,4 @@ ORxG_SCY_11_CLK |\ ORxG_EHTR)#endif /* CONFIG_SYS_IO_BASE */ - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/hermes.h +0 -9
@@ -332,13 +332,4 @@#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#endif /* __CONFIG_H */
include/configs/hmi1001.h +0 -3
@@ -35,9 +35,6 @@#define CONFIG_SYS_MPC5XXX_CLKIN 33000000/* ... running at 33.000000MHz */ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_HIGH_BATS 1/* High BATs supported */
include/configs/hymod.h +0 -8
@@ -728,14 +728,6 @@#define FPGA_MAIN_IRQ SIU_INT_IRQ2/* -* Internal Definitions -* -* Boot Flags -*/ -#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH*/ -#define BOOTFLAG_WARM 0x02/* Software reboot */ - -/*
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 1 line
1.7.0.4
Part of the diff is not shown here. View the raw message.
PATCH 1/1 powerpc: Cleanup BOOTFLAG_* usage
Dear Peter Tyser,
Quoted 9 lines · In message <[email protected]> you wrote:
BOOTFLAG_COLDandBOOTFLAG_WARMhave identical definitions for every PowerPC board, so share a common definition.Signed-off-by Peter Tyser <[email protected]>---
It looks like there are only a few boards (5) that use the warm/cold boot concept, maybe we should remove this largely unused feature? Or at least remove it for most CPU types? Is anyone out there using it?
I added this with the very first versions of PPCBoot, more than a decade ago. I've never seen it really used in the code.
I vote for removing it.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "May the forces of evil become confused on the way to your house." - George Carlin
PATCH 1/1 powerpc: Cleanup BOOTFLAG_* usage
Quoted 10 lines · On Monday 13 September 2010 07:34:40 Wolfgang Denk wrote:
Quoted 9 lines
BOOTFLAG_COLDandBOOTFLAG_WARMhave identical definitions for every PowerPC board, so share a common definition.Signed-off-by Peter Tyser <[email protected]>---
It looks like there are only a few boards (5) that use the warm/cold boot concept, maybe we should remove this largely unused feature? Or at least remove it for most CPU types? Is anyone out there using it?
Quoted 4 lines
I added this with the very first versions of PPCBoot, more than a decade ago. I've never seen it really used in the code.
I vote for removing it.
Me too:
Cheers,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de
PATCH 1/1 powerpc: Cleanup BOOTFLAG_* usage
Quoted 11 lines · Stefan Roese
Quoted 10 lines · On Monday 13 September 2010 07:34:40 Wolfgang Denk wrote:
Quoted 9 lines
BOOTFLAG_COLDandBOOTFLAG_WARMhave identical definitions for every PowerPC board, so share a common definition.Signed-off-by Peter Tyser <[email protected]>---
It looks like there are only a few boards (5) that use the warm/cold boot concept, maybe we should remove this largely unused feature? Or at least remove it for most CPU types? Is anyone out there using it?
Quoted 8 lines
Quoted 4 lines
I added this with the very first versions of PPCBoot, more than a decade ago. I've never seen it really used in the code.
I vote for removing it.
Me too:
Acked-by Stefan Roese <[email protected]>
Sounds good, I'll resubmit. Getting rid of the BOOTFLAG_* defines will make bd->bi_bootflags unused. What's the policy on modifying the bd_info structure? Leave an unused bi_bootflags field to prevent breakage of OSes?
Best,
Peter
PATCH 1/1 powerpc: Cleanup BOOTFLAG_* usage
Dear Peter Tyser,
Quoted 5 lines · In message <1284389585.26713.2967.camel@petert> you wrote:
Sounds good, I'll resubmit. Getting rid of the BOOTFLAG_* defines will make
bd->bi_bootflagsunused. What's the policy on modifying thebd_infostructure? Leave an unusedbi_bootflagsfield to prevent breakage of OSes?
AFAICT only 2.4 PowerPC Linux kernels make use of bd_info. I think we can just drop that entry.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Knowledge, sir, should be free to all! -- Harry Mudd, "I, Mudd", stardate 4513.3
PATCH 1/1 powerpc: Cleanup BOOTFLAG_* usage
Quoted 11 lines · On Tue, 14 Sep 2010 00:02:49 +0200 Wolfgang Denk <[email protected]> wrote:
Dear Peter Tyser,
Quoted 5 lines · In message <1284389585.26713.2967.camel@petert> you wrote:
Sounds good, I'll resubmit. Getting rid of the BOOTFLAG_* defines will make
bd->bi_bootflagsunused. What's the policy on modifying thebd_infostructure? Leave an unusedbi_bootflagsfield to prevent breakage of OSes?AFAICT only 2.4 PowerPC Linux kernels make use of
bd_info. I think we can just drop that entry.
2.6 arch/ppc used it, and cuImage still does. Ideally people would use a device tree if they have a new kernel and a new U-Boot (are there still individual boards that don't yet have device tree support in U-Boot?), but currently the old scheme still works. IMHO it should either work, or be obvious about not working -- that is, either keep bd_info compatible or remove support for passing it to an OS altogether.
-Scott
PATCH 1/1 powerpc: Cleanup BOOTFLAG_* usage
Quoted 15 lines · Scott Wood
Quoted 11 lines · On Tue, 14 Sep 2010 00:02:49 +0200 Wolfgang Denk <[email protected]> wrote:
Dear Peter Tyser,
Quoted 5 lines · In message <1284389585.26713.2967.camel@petert> you wrote:
Sounds good, I'll resubmit. Getting rid of the BOOTFLAG_* defines will make
bd->bi_bootflagsunused. What's the policy on modifying thebd_infostructure? Leave an unusedbi_bootflagsfield to prevent breakage of OSes?AFAICT only 2.4 PowerPC Linux kernels make use of
bd_info. I think we can just drop that entry.
Quoted 6 lines
2.6
arch/ppcused it, and cuImage still does. Ideally people would use a device tree if they have a new kernel and a new U-Boot (are there still individual boards that don't yet have device tree support in U-Boot?), but currently the old scheme still works. IMHO it should either work, or be obvious about not working -- that is, either keepbd_infocompatible or remove support for passing it to an OS altogether.
I agree with Scott; breaking the bd_info defeats it purpose. I won't modify bd_info in my change and leave removing bd_info for a future discussion.
Thanks,
Peter
PATCH 1/1 powerpc: Cleanup BOOTFLAG_* usage
In reply to Peter TyserDear Peter Tyser,
Quoted 9 lines · In message <[email protected]> you wrote:
BOOTFLAG_COLDandBOOTFLAG_WARMhave identical definitions for every PowerPC board, so share a common definition.Signed-off-by Peter Tyser <[email protected]>---
It looks like there are only a few boards (5) that use the warm/cold boot concept, maybe we should remove this largely unused feature? Or at least remove it for most CPU types? Is anyone out there using it?
Sorry, this doesn't apply any more:
fatal: sha1 information is lacking or useless (include/configs/XPEDITE5170.h).
Repository lacks necessary blobs to fall back on 3-way merge. Cannot fall back to three-way merge.
Patch failed at 0001 powerpc: Cleanup BOOTFLAG_* usage
Can you please have a look?
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de I think animal testing is a terrible idea; they get all nervous and give the wrong answers.