hwmon: Add support for MAX6695/6696 to
v3 cover hwmon: Add support for MAX6695/6696 to
This patchset cleans up the lm90 driver and adds support for Maxim MAX6695/6696 temperature sensors.
In detail,
- Add support for tempX_emergency_alarm ABI attribute
- Introduce device feature bits to reduce runtime overhead
- Introduce function to delete sysfs files
- Simplify calculations in set_temp11()
- Introduce 3rd set of upper temperature limits (named 'emergency' limits)
- Add max6659 support for those limits, and add support for max6659 address 0x4e
- Add max6695/96 support
The patchset depends on the previously submitted lm90 driver cleanup patch.
v2 changes:
- Split patch into multiple parts
- Add support for max6659 address 0x4e and extra features
- Improved max6695/96 device detection code
- max6695/96 does not support extended external limits, so don't try to read them for the 3rd sensor
- Other changes to address review feedback
- Updated Documentation/hwmon/lm90 and drivers/hwmon/Kconfig.
- Fixed alert_alarms comment
- remote offset register not supported on max6658 (fixed comment)
- rewrote set_temp11()
- Added tempX_emergency_alarm attribute
- Some code alignment fixes
v3 changes:
- Express bit masks using shift values instead of hex constants
- Replaced tabs after #define with space
- Negated LM90_HAVE_REM_LIMIT_EXT test
- Reordered patches 5 and 6 (introduce max6659 first, then its extra features)
- Clarified that only max6696 permits multiple I2C addresses
- Use max6696 instead of max6695 in chips enum to avoid mixup with max6659
- Fixed register index for temp3_crit_hyst
- Moved lm90_select_remote_channel() to avoid forward declaration of lm90_read_reg()
- Added comment indicating that lm90_select_remote_channel() must be called with update lock held
- Added tempX_emergency_hyst attribute
Patches unchanged in v3 are listed as v2 patches and are resubmitted for clarity.
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Re: [lm-sensors] [PATCH v3 0/7] hwmon: Add support for MAX6695/6696
Quoted 2 lines · Guenter Roeck
This patchset cleans up the lm90 driver and adds support for Maxim MAX6695/6696 temperature sensors.
Series applied, thanks!
Please make sure wiki/Devices and sensors-detect are up-to-date.
Signature · 6 lines
Jean Delvare _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Re: [lm-sensors] [PATCH v3 0/7] hwmon: Add support for MAX6695/6696
In reply to Guenter RoeckQuoted 8 lines · Jean Delvare
Quoted 2 lines · Guenter Roeck
This patchset cleans up the lm90 driver and adds support for Maxim MAX6695/6696 temperature sensors.
Series applied, thanks!
Please make sure wiki/Devices and sensors-detect are up-to-date.
Will do.
Guenter
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Re: [lm-sensors] [PATCH v3 0/7] hwmon: Add support for MAX6695/6696
In reply to Guenter RoeckQuoted 8 lines · Jean Delvare
Quoted 2 lines · Guenter Roeck
This patchset cleans up the lm90 driver and adds support for Maxim MAX6695/6696 temperature sensors.
Series applied, thanks!
Please make sure wiki/Devices and sensors-detect are up-to-date.
Is the patch going to make it into 2.6.36, or will it be 2.6.37 ?
Guenter
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Re: [lm-sensors] [PATCH v3 0/7] hwmon: Add support for MAX6695/6696
In reply to Guenter RoeckQuoted 10 lines · Guenter Roeck
Quoted 8 lines · Jean Delvare
Quoted 2 lines · Guenter Roeck
This patchset cleans up the lm90 driver and adds support for Maxim MAX6695/6696 temperature sensors.
Series applied, thanks!
Please make sure wiki/Devices and sensors-detect are up-to-date.
Is the patch going to make it into 2.6.36, or will it be 2.6.37 ?
2.6.37. The merge window for 2.6.36 closed like 4 weeks ago, and none of these patches is fixing any bug.
Signature · 6 lines
Jean Delvare _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Re: [lm-sensors] [PATCH v3 0/7] hwmon: Add support for MAX6695/6696
In reply to Guenter RoeckQuoted 6 lines · Jean Delvare
Quoted 5 lines · Guenter Roeck
Quoted 4 lines · Jean Delvare
Quoted 2 lines · Guenter Roeck
This patchset cleans up the lm90 driver and adds support for Maxim MAX6695/6696 temperature sensors.
Quoted 9 lines
Quoted 5 lines
Quoted 4 lines
Series applied, thanks!
Please make sure wiki/Devices and sensors-detect are up-to-date.
Is the patch going to make it into 2.6.36, or will it be 2.6.37 ?
2.6.37. The merge window for 2.6.36 closed like 4 weeks ago, and none of these patches is fixing any bug.
Ok, makes sense. Wasn't sure how the rules are for additions to existing drivers.
Guenter
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors