Skip to contentSkip to conversation

APM821xx: Add CPU support

PATCH Superseded tmarri at apm.com 2 participants 2 messages Sep 28, 2010 PowerPC

v6 of 7 Superseded Latest is v7 →

lore
Share & tools
lore
#0 lore raw

PATCH v6 1/2 APM821xx: Add CPU support

From: Tirumala Marri <[email protected]>

APM821XX is a new line of SoCs which are derivatives of PPC44X family of processors. This patch adds support of CPU, cache, tlb, 32k ocm, bootstraps, PLB and AHB bus.

---
V5:
* Move CONFIG_SYS_PERIPHERAL_BASE to apm821xx.h
V6:
* Correcting indentation.
---

---
 arch/powerpc/cpu/ppc4xx/cpu.c           |   19 ++++++++
 arch/powerpc/cpu/ppc4xx/cpu_init.c      |    5 +-
 arch/powerpc/cpu/ppc4xx/speed.c         |   75 ++++++++++++++++++++++++++++++-
 arch/powerpc/cpu/ppc4xx/start.S         |   11 +++--
 arch/powerpc/include/asm/apm821xx.h     |   72 +++++++++++++++++++++++++++++
 arch/powerpc/include/asm/ppc4xx-ebc.h   |    3 +-
 arch/powerpc/include/asm/ppc4xx-isram.h |   14 +++++-
 arch/powerpc/include/asm/ppc4xx-sdram.h |   12 +++---
 arch/powerpc/include/asm/ppc4xx-uic.h   |    5 +-
 arch/powerpc/include/asm/ppc4xx.h       |    4 ++
 arch/powerpc/include/asm/processor.h    |    1 +
 11 files changed, 202 insertions(+), 19 deletions(-)
arch/powerpc/cpu/ppc4xx/cpu.c +19 -0
index 6009b0c..67f1fff 100644
@@ -250,6 +250,20 @@ static char *bootstrap_str[] = {
 };
 static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' };
 #endif
+#if defined(CONFIG_APM821XX)
+#define SDR0_PINSTP_SHIFT       29
+static char *bootstrap_str[] = {
+	"RESERVED",
+	"RESERVED",
+	"RESERVED",
+	"NAND (8 bits)",
+	"NOR  (8 bits)",
+	"NOR  (8 bits) w/PLL Bypassed",
+	"I2C (Addr 0x54)",
+	"I2C (Addr 0x52)",
+};
+static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H' };
+#endif
 
 #if defined(SDR0_PINSTP_SHIFT)
 static int bootstrap_option(void)
@@ -590,6 +604,11 @@ int checkcpu (void)
 		strcpy(addstr, "No Security support");
 		break;
 
+	case PVR_APM821XX_RA:
+		puts("APM821XX Rev. A");
+		strcpy(addstr, "Security support");
+		break;
+
 	case PVR_VIRTEX5:
 		puts("440x5 VIRTEX5");
 		break;
arch/powerpc/cpu/ppc4xx/cpu_init.c +3 -2
index d54b30e..125241b 100644
@@ -237,7 +237,8 @@ cpu_init_f (void)
 
 	reconfigure_pll(CONFIG_SYS_PLL_RECONFIG);
 
-#if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && !defined(CONFIG_SYS_4xx_GPIO_TABLE)
+#if !defined(CONFIG_APM821XX) && (defined(CONFIG_405EP) ||\
+		defined (CONFIG_405EX)) && !defined(CONFIG_SYS_4xx_GPIO_TABLE)
 	/*
 	 * GPIO0 setup (select GPIO or alternate function)
 	 */
@@ -393,7 +394,7 @@ cpu_init_f (void)
 #if defined(CONFIG_405EX) || \
     defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
     defined(CONFIG_460EX) || defined(CONFIG_460GT)  || \
-    defined(CONFIG_460SX)
+    defined(CONFIG_460SX) || defined(CONFIG_APM821XX)
 	/*
 	 * Set PLB4 arbiter (Segment 0 and 1) to 4 deep pipeline read
 	 */
arch/powerpc/cpu/ppc4xx/speed.c +74 -1

93 lines not on this page · raw message

arch/powerpc/cpu/ppc4xx/start.S +7 -4
index 7a65d9f..c2d52bf 100644
@@ -703,7 +703,8 @@ _start:
     defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
     defined(CONFIG_460SX)
 	mtdcr	L2_CACHE_CFG,r0		/* Ensure L2 Cache is off */
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+      defined(CONFIG_APM821XX)
 	lis	r1, 0x0000
 	ori	r1,r1,0x0008		/* Set L2_CACHE_CFG[RDBW]=1 */
 	mtdcr	L2_CACHE_CFG,r1
@@ -731,7 +732,8 @@ _start:
 	lis	r1, 0x8003
 	ori	r1,r1, 0x0980		/* fourth 64k */
 	mtdcr	ISRAM0_SB3CR,r1
-#elif defined(CONFIG_440SPE) || defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#elif defined(CONFIG_440SPE) || defined(CONFIG_460EX) || \
+      defined(CONFIG_460GT) || defined(CONFIG_APM821XX)
 	lis	r1,0x0000		/* BAS = X_0000_0000 */
 	ori	r1,r1,0x0984		/* first 64k */
 	mtdcr	ISRAM0_SB0CR,r1
@@ -744,7 +746,8 @@ _start:
 	lis	r1, 0x0003
 	ori	r1,r1, 0x0984		/* fourth 64k */
 	mtdcr	ISRAM0_SB3CR,r1
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+    defined(CONFIG_APM821XX)
 	lis	r2,0x7fff
 	ori	r2,r2,0xffff
 	mfdcr	r1,ISRAM1_DPC
@@ -755,7 +758,7 @@ _start:
 	mtdcr	ISRAM1_PMEG,r1
 
 	lis	r1,0x0004		/* BAS = 4_0004_0000 */
-	ori	r1,r1,0x0984		/* 64k */
+	ori	r1,r1,ISRAM1_SIZE       /* ocm size */
 	mtdcr	ISRAM1_SB0CR,r1
 #endif
 #elif defined(CONFIG_460SX)
arch/powerpc/include/asm/apm821xx.h new file +72 -0

72 lines not on this page · raw message

arch/powerpc/include/asm/ppc4xx-ebc.h +2 -1
index 9c17e46..75af130 100644
@@ -69,7 +69,8 @@
 #define EBC_NUM_BANKS	6
 #endif
 
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+    defined(CONFIG_APM821XX)
 #define EBC_NUM_BANKS	3
 #endif
 
arch/powerpc/include/asm/ppc4xx-isram.h +11 -3
index d6d17ac..32e1297 100644
@@ -25,7 +25,8 @@
 /*
  * Internal SRAM
  */
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_APM821XX)
 #define ISRAM0_DCR_BASE 0x380
 #else
 #define ISRAM0_DCR_BASE 0x020
@@ -42,7 +43,8 @@
 #define ISRAM0_REVID	(ISRAM0_DCR_BASE+0x09)	/* SRAM bus revision id reg */
 #define ISRAM0_DPC	(ISRAM0_DCR_BASE+0x0a)	/* SRAM data parity check reg */
 
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+    defined(CONFIG_APM821XX)
 #define ISRAM1_DCR_BASE 0x0B0
 #define ISRAM1_SB0CR	(ISRAM1_DCR_BASE+0x00)	/* SRAM1 bank config 0*/
 #define ISRAM1_BEAR	(ISRAM1_DCR_BASE+0x04)	/* SRAM1 bus error addr reg */
@@ -54,13 +56,19 @@
 #define ISRAM1_DPC	(ISRAM1_DCR_BASE+0x0a)	/* SRAM1 data parity check reg */
 #endif /* CONFIG_460EX || CONFIG_460GT */
 
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define ISRAM1_SIZE 0x0984 /* OCM size 64k */
+#elif defined(CONFIG_APM821XX)
+#define ISRAM1_SIZE 0x0784 /* OCM size 32k */
+#endif
+
 /*
  * L2 Cache
  */
 #if defined (CONFIG_440GX) || \
     defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
     defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
-    defined(CONFIG_460SX)
+    defined(CONFIG_460SX) || defined(CONFIG_APM821XX)
 #define L2_CACHE_BASE	0x030
 #define L2_CACHE_CFG	(L2_CACHE_BASE+0x00)	/* L2 Cache Config      */
 #define L2_CACHE_CMD	(L2_CACHE_BASE+0x01)	/* L2 Cache Command     */
arch/powerpc/include/asm/ppc4xx-sdram.h +6 -6
index ac150c2..d570d79 100644
@@ -292,7 +292,7 @@
  */
 #if defined(CONFIG_440SPE) || \
     defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
-    defined(CONFIG_460SX)
+    defined(CONFIG_460SX) || defined(CONFIG_APM821XX)
 #define SDRAM_RXBAS_SDBA_MASK		0xFFE00000	/* Base address	*/
 #define SDRAM_RXBAS_SDBA_ENCODE(n)	((u32)(((phys_size_t)(n) >> 2) & 0xFFE00000))
 #define SDRAM_RXBAS_SDBA_DECODE(n)	((((phys_size_t)(n)) & 0xFFE00000) << 2)
@@ -365,7 +365,7 @@
 /*
  * Memory controller registers
  */
-#ifdef CONFIG_405EX
+#if defined(CONFIG_405EX) || defined(CONFIG_APM821XX)
 #define SDRAM_BESR	0x00	/* PLB bus error status (read/clear)         */
 #define SDRAM_BESRT	0x01	/* PLB bus error status (test/set)           */
 #define SDRAM_BEARL	0x02	/* PLB bus error address low                 */
@@ -375,9 +375,9 @@
 #define SDRAM_PLBOPT	0x08	/* PLB slave options                         */
 #define SDRAM_PUABA	0x09	/* PLB upper address base                    */
 #define SDRAM_MCSTAT	0x1F	/* memory controller status                  */
-#else /* CONFIG_405EX */
+#else /* CONFIG_405EX || CONFIG_APM821XX */
 #define SDRAM_MCSTAT	0x14	/* memory controller status                  */
-#endif /* CONFIG_405EX */
+#endif /* CONFIG_405EX || CONFIG_APM821XX */
 #define SDRAM_MCOPT1	0x20	/* memory controller options 1               */
 #define SDRAM_MCOPT2	0x21	/* memory controller options 2               */
 #define SDRAM_MODT0	0x22	/* on die termination for bank 0             */
@@ -423,12 +423,12 @@
 #define SDRAM_MEMODE	0x89	/* memory extended mode                      */
 #define SDRAM_ECCES	0x98	/* ECC error status                          */
 #define SDRAM_CID	0xA4	/* core ID                                   */
-#ifndef CONFIG_405EX
+#if !defined(CONFIG_405EX) && !defined(CONFIG_APM821XX)
 #define SDRAM_RID	0xA8	/* revision ID                               */
 #endif
 #define SDRAM_FCSR	0xB0	/* feedback calibration status               */
 #define SDRAM_RTSR	0xB1	/* run time status tracking                  */
-#ifdef CONFIG_405EX
+#if  defined(CONFIG_405EX) || defined(CONFIG_APM821XX)
 #define SDRAM_RID	0xF8	/* revision ID                               */
 #endif
 
arch/powerpc/include/asm/ppc4xx-uic.h +3 -2
index 782d045..3714a0a 100644
@@ -31,7 +31,7 @@
  */
 #if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
     defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
-    defined(CONFIG_460SX)
+    defined(CONFIG_460SX) || defined(CONFIG_APM821XX)
 #define UIC_MAX		4
 #elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
     defined(CONFIG_405EX)
@@ -252,7 +252,8 @@
 #define VECNUM_ETH0		(32 + 28)
 #endif /* CONFIG_440SPE */
 
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+    defined(CONFIG_APM821XX)
 /* UIC 0 */
 #define VECNUM_UIC2NCI		10
 #define VECNUM_UIC2CI		11
arch/powerpc/include/asm/ppc4xx.h +4 -0
index 87a16ec..1b98f8b 100644
@@ -79,6 +79,10 @@
 #include <asm/ppc460sx.h>
 #endif
 
+#if defined(CONFIG_APM821XX)
+#include <asm/apm821xx.h>
+#endif
+
 /*
  * Configure which SDRAM/DDR/DDR2 controller is equipped
  */
arch/powerpc/include/asm/processor.h +1 -0
index 84a1e2e..9cafe85 100644
@@ -916,6 +916,7 @@
 #define PVR_460SX_RA_V1 0x13541801 /* 460SX rev A Variant 1 Security disabled */
 #define PVR_460GX_RA    0x13541802 /* 460GX rev A                   */
 #define PVR_460GX_RA_V1 0x13541803 /* 460GX rev A Variant 1 Security disabled */
+#define PVR_APM821XX_RA 0x12C41C80 /* APM821XX rev A */
 #define PVR_601		0x00010000
 #define PVR_602		0x00050000
 #define PVR_603		0x00030000
Signature · 1 line
1.6.1.rc3
#1 lore raw

PATCH v6 1/2 APM821xx: Add CPU support

Dear tmarri at apm.com,

Quoted 5 lines · In message <[email protected]> you wrote:

From: Tirumala Marri <[email protected]>

APM821XX is a new line of SoCs which are derivatives of PPC44X family of processors. This patch adds support of CPU, cache, tlb, 32k ocm, bootstraps, PLB and AHB bus.

...

arch/powerpc/cpu/ppc4xx/cpu_init.c cpu_init_f (void) · line 241

Quoted 3 lines
arch/powerpc/cpu/ppc4xx/cpu_init.c +2 -1
-#if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && !defined(CONFIG_SYS_4xx_GPIO_TABLE)
+#if !defined(CONFIG_APM821XX) && (defined(CONFIG_405EP) ||\
+		defined (CONFIG_405EX)) && !defined(CONFIG_SYS_4xx_GPIO_TABLE)

Please reorder to avoid breaking the expression in parens, and to keep the list sorted (in the other places you also sort the 'A' after the '4', as one would expect), for example:

#if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && \\
    !defined(CONFIG_APM821XX) && !defined(CONFIG_SYS_4xx_GPIO_TABLE)

Thanks.

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Who is the oldest inhabitant of this village?"
"We haven't got one; we had one, but he died three weeks ago."