Skip to contentSkip to conversation

Pull request: u-boot-arm

U-Boot New Wolfgang Denk 2 participants 6 messages Oct 13, 2010 – Oct 17, 2010 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

The following changes since commit bfc7bea6adc46e1db2f5a5e3464d7652ed67c864:

Merge branch 'master' of git://git.denx.de/u-boot-x86 (2010-10-11 10:00:34 +0200)

are available in the git repository at:

git://git.denx.de/u-boot-arm.git master

Albert Aribaud (6):
arm: bugfix: replace ble with blo in start.S files
orion5x: fix relocation-incompatible code
mvsata_ide: adjust port init sequence
orion5x: optimize window size computation
mvsata_ide: adjust port init sequence
orion5x: optimize window size computation

Alexander Stein (1):
at91: Add arch_preboot_os which disables PIT in a faster way

Andreas Bie?mann (6):
at91_emac.c: fix 'Warning: eth device name has a space!' at91_emac.c: poll for IDLE when writing PHY at91_emac.h: fix typo in register definition
atmel_usart: change register access to C structure arch/arm/include/asm/sizes.h: cleanups board/armltd/integrator/split_by_variant.sh: fix 'echo -n'

Ben Gardiner (1):
ARM: relocation: don't undef CONFIG_SYS_ARM_WITHOUT_RELOC

Heiko Schocher (1):
ARM: relocation: fix typo in comment

Matt Waddel (2):
ARMV7: Versatile Express Coretile CortexA9x4 support
ARMV7: Fixed baudrate setting in pl01x driver

Prafulla Wadaskar (8):
Kirkwood: print_cpuinfo fixed for valid devid revid
Kirkwood: dram_init is moved to dram.c
kirkwood: added common config file mv-common.h
Kirkwood: Changes specific to ARM relocation support
Kirkwood: print_cpuinfo fixed for valid devid revid
Kirkwood: dram_init is moved to dram.c
kirkwood: added common config file mv-common.h
Kirkwood: Changes specific to ARM relocation support

Reinhard Meyer (1):
AT91: convert cpu.c to struct SoC access

Stefano Babic (10):
Use common function to set GPIOs for MX3 and MX5
ARM: Use syslib functions for all CORTEXA8
MX51: Added pins definition to set up pads
MX51: add structure to access System Reset Controller
MXC: Add watchdog support to serial driver
MX51: Drop unused header file for mx51evk
MXC: Correct SPI_CPOL setting in SPI driver
MXC: Fix byte-ordering in SPI driver for i.MX31/i.MX51
MX51: Register definitions cannot be included in board config file
MX51: Support for TTECH vision2 board

Wolfgang Denk (3):
Merge branch 'master' of git://git.denx.de/u-boot-imx
Merge branch 'at91' of git://git.denx.de/u-boot-atmel
Merge branch 'master' of git://git.denx.de/u-boot-marvell

 MAINTAINERS                                        |    5 +
 MAKEALL                                            |    1 +
 arch/arm/cpu/arm1136/start.S                       |    8 +-
 arch/arm/cpu/arm1176/start.S                       |   10 +-
 arch/arm/cpu/arm720t/start.S                       |   10 +-
 arch/arm/cpu/arm920t/start.S                       |   10 +-
 arch/arm/cpu/arm925t/start.S                       |   10 +-
 arch/arm/cpu/arm926ejs/at91/cpu.c                  |   48 +-
 arch/arm/cpu/arm926ejs/kirkwood/cpu.c              |   34 +-
 arch/arm/cpu/arm926ejs/kirkwood/dram.c             |   38 +
 arch/arm/cpu/arm926ejs/orion5x/cpu.c               |  112 ++--
 arch/arm/cpu/arm926ejs/orion5x/timer.c             |    6 +-
 arch/arm/cpu/arm926ejs/start.S                     |   10 +-
 arch/arm/cpu/arm946es/start.S                      |    8 +-
 arch/arm/cpu/arm_intcm/start.S                     |   10 +-
 arch/arm/cpu/armv7/Makefile                        |    3 +-
 arch/arm/cpu/armv7/omap-common/Makefile            |    1 -
 arch/arm/cpu/armv7/start.S                         |    8 +-
 arch/arm/cpu/armv7/{omap-common => }/syslib.c      |    0
 arch/arm/cpu/ixp/start.S                           |   10 +-
 arch/arm/cpu/lh7a40x/start.S                       |   11 +-
 arch/arm/cpu/pxa/start.S                           |    8 +-
 arch/arm/cpu/s3c44b0/start.S                       |   12 +-
 arch/arm/cpu/sa1100/start.S                        |   10 +-
 arch/arm/include/asm/arch-arm925t/sizes.h          |   50 --
 arch/arm/include/asm/arch-arm926ejs/sizes.h        |   51 --
 arch/arm/include/asm/arch-armv7/sysctrl.h          |   70 ++
 .../arm/include/asm/arch-armv7/systimer.h          |   54 +-
 .../arm/include/asm/arch-armv7/wdt.h               |   57 +-
 arch/arm/include/asm/arch-at91/at91_emac.h         |    2 +-
 arch/arm/include/asm/arch-kirkwood/cpu.h           |    2 +
 arch/arm/include/asm/arch-mx31/mx31-regs.h         |   14 +-
 arch/arm/include/asm/arch-mx31/mx31.h              |   25 -
 arch/arm/include/asm/arch-mx51/imx-regs.h          |   26 +-
 arch/arm/include/asm/arch-mx51/mx51_pins.h         |   44 ++
 arch/arm/include/asm/arch-mx51/sys_proto.h         |    1 +
 arch/arm/include/asm/arch-omap/sizes.h             |   52 --
 arch/arm/include/asm/arch-omap24xx/omap2420.h      |    2 +-
 arch/arm/include/asm/arch-omap24xx/sizes.h         |   49 --
 arch/arm/include/asm/arch-orion5x/cpu.h            |    1 +
 arch/arm/include/asm/sizes.h                       |    5 +-
 board/Marvell/guruplug/guruplug.c                  |   11 -
 board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c    |   11 -
 board/Marvell/openrd_base/openrd_base.c            |   11 -
 board/Marvell/rd6281a/rd6281a.c                    |   11 -
 board/Marvell/sheevaplug/sheevaplug.c              |   11 -
 board/armltd/integrator/split_by_variant.sh        |  129 ++--
 board/armltd/vexpress/Makefile                     |   49 ++
 board/armltd/vexpress/ca9x4_ct_vxp.c               |  220 ++++++
 board/armltd/vexpress/config.mk                    |   23 +
 board/armltd/vexpress/u-boot.lds                   |   65 ++
 board/davedenx/qong/qong.c                         |   29 +-
 board/freescale/mx51evk/mx51evk.c                  |    2 -
 board/ttcontrol/vision2/Makefile                   |   48 ++
 board/ttcontrol/vision2/config.mk                  |   25 +
 board/ttcontrol/vision2/imximage_hynix.cfg         |  209 ++++++
 board/ttcontrol/vision2/vision2.c                  |  711 ++++++++++++++++++++
 boards.cfg                                         |    2 +
 drivers/block/mvsata_ide.c                         |   42 +-
 drivers/gpio/Makefile                              |    2 +-
 drivers/gpio/{mx31_gpio.c => mxc_gpio.c}           |   47 +-
 drivers/misc/fsl_pmic.c                            |   10 +-
 drivers/net/at91_emac.c                            |   22 +-
 drivers/serial/atmel_usart.c                       |   36 +-
 drivers/serial/atmel_usart.h                       |   56 +-
 drivers/serial/serial_mxc.c                        |    7 +-
 drivers/serial/serial_pl01x.c                      |   93 +--
 drivers/spi/mxc_spi.c                              |  168 ++++--
 include/configs/ca9x4_ct_vxp.h                     |  196 ++++++
 include/configs/da850evm.h                         |    1 -
 include/configs/guruplug.h                         |  103 +---
 include/configs/h2_p2_dbg_board.h                  |    2 +-
 include/configs/imx27lite-common.h                 |    3 +-
 include/configs/imx31_litekit.h                    |    4 +-
 include/configs/imx31_phycore.h                    |    2 +-
 include/configs/keymile-common.h                   |    1 +
 include/configs/km_arm.h                           |    2 +-
 include/configs/mv-common.h                        |  230 +++++++
 include/configs/mv88f6281gtw_ge.h                  |  120 +---
 include/configs/mx31ads.h                          |    4 +-
 include/configs/mx31pdk.h                          |    4 +-
 include/configs/mx51evk.h                          |    2 +-
 include/configs/omap1510.h                         |    2 +-
 include/configs/omap3_beagle.h                     |    3 +-
 include/configs/omap730.h                          |    2 +-
 include/configs/openrd_base.h                      |  146 +----
 include/configs/qong.h                             |    9 +-
 include/configs/rd6281a.h                          |  101 +---
 include/configs/sheevaplug.h                       |  104 +---
 include/configs/tx25.h                             |    3 +-
 include/configs/vision2.h                          |  214 ++++++
 include/mc13892.h                                  |    3 +
 .../mx51evk/mx51evk.h => include/mxc_gpio.h        |   50 +-
 93 files changed, 2904 insertions(+), 1345 deletions(-)
 rename arch/arm/cpu/armv7/{omap-common => }/syslib.c (100%)
 delete mode 100644 arch/arm/include/asm/arch-arm925t/sizes.h
 delete mode 100644 arch/arm/include/asm/arch-arm926ejs/sizes.h
 create mode 100644 arch/arm/include/asm/arch-armv7/sysctrl.h
 copy board/freescale/mx51evk/mx51evk.h => arch/arm/include/asm/arch-armv7/systimer.h (55%)
 copy board/freescale/mx51evk/mx51evk.h => arch/arm/include/asm/arch-armv7/wdt.h (55%)
 delete mode 100644 arch/arm/include/asm/arch-omap/sizes.h
 delete mode 100644 arch/arm/include/asm/arch-omap24xx/sizes.h
 create mode 100644 board/armltd/vexpress/Makefile
 create mode 100644 board/armltd/vexpress/ca9x4_ct_vxp.c
 create mode 100644 board/armltd/vexpress/config.mk
 create mode 100644 board/armltd/vexpress/u-boot.lds
 create mode 100644 board/ttcontrol/vision2/Makefile
 create mode 100644 board/ttcontrol/vision2/config.mk
 create mode 100644 board/ttcontrol/vision2/imximage_hynix.cfg
 create mode 100644 board/ttcontrol/vision2/vision2.c
 rename drivers/gpio/{mx31_gpio.c => mxc_gpio.c} (63%)
 create mode 100644 include/configs/ca9x4_ct_vxp.h
 create mode 100644 include/configs/mv-common.h
 create mode 100644 include/configs/vision2.h
 rename board/freescale/mx51evk/mx51evk.h => include/mxc_gpio.h (54%)

Best regards,

Wolfgang Denk

Signature · 8 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Making files is easy under  the  UNIX  operating  system.  Therefore,
users  tend  to  create  numerous  files  using large amounts of file
space. It has been said that the only standard thing about  all  UNIX
systems  is  the  message-of-the-day  telling users to clean up their
files.                             - System V.2 administrator's guide
author Applied
#1 lore raw
Quoted 174 lines · In message <[email protected]> you wrote:

The following changes since commit bfc7bea6adc46e1db2f5a5e3464d7652ed67c864:

Merge branch 'master' of git://git.denx.de/u-boot-x86 (2010-10-11 10:00:34 +0200)

are available in the git repository at:

git://git.denx.de/u-boot-arm.git master

Albert Aribaud (6):
arm: bugfix: replace ble with blo in start.S files
orion5x: fix relocation-incompatible code
mvsata_ide: adjust port init sequence
orion5x: optimize window size computation
mvsata_ide: adjust port init sequence
orion5x: optimize window size computation

Alexander Stein (1):
at91: Add arch_preboot_os which disables PIT in a faster way

Andreas Bie?mann (6):
at91_emac.c: fix 'Warning: eth device name has a space!' at91_emac.c: poll for IDLE when writing PHY at91_emac.h: fix typo in register definition
atmel_usart: change register access to C structure arch/arm/include/asm/sizes.h: cleanups board/armltd/integrator/split_by_variant.sh: fix 'echo -n'

Ben Gardiner (1):
ARM: relocation: don't undef CONFIG_SYS_ARM_WITHOUT_RELOC

Heiko Schocher (1):
ARM: relocation: fix typo in comment

Matt Waddel (2):
ARMV7: Versatile Express Coretile CortexA9x4 support
ARMV7: Fixed baudrate setting in pl01x driver

Prafulla Wadaskar (8):
Kirkwood: print_cpuinfo fixed for valid devid revid
Kirkwood: dram_init is moved to dram.c
kirkwood: added common config file mv-common.h
Kirkwood: Changes specific to ARM relocation support
Kirkwood: print_cpuinfo fixed for valid devid revid
Kirkwood: dram_init is moved to dram.c
kirkwood: added common config file mv-common.h
Kirkwood: Changes specific to ARM relocation support

Reinhard Meyer (1):
AT91: convert cpu.c to struct SoC access

Stefano Babic (10):
Use common function to set GPIOs for MX3 and MX5
ARM: Use syslib functions for all CORTEXA8
MX51: Added pins definition to set up pads
MX51: add structure to access System Reset Controller
MXC: Add watchdog support to serial driver
MX51: Drop unused header file for mx51evk
MXC: Correct SPI_CPOL setting in SPI driver
MXC: Fix byte-ordering in SPI driver for i.MX31/i.MX51
MX51: Register definitions cannot be included in board config file
MX51: Support for TTECH vision2 board

Wolfgang Denk (3):
Merge branch 'master' of git://git.denx.de/u-boot-imx
Merge branch 'at91' of git://git.denx.de/u-boot-atmel
Merge branch 'master' of git://git.denx.de/u-boot-marvell

 MAINTAINERS                                        |    5 +
 MAKEALL                                            |    1 +
 arch/arm/cpu/arm1136/start.S                       |    8 +-
 arch/arm/cpu/arm1176/start.S                       |   10 +-
 arch/arm/cpu/arm720t/start.S                       |   10 +-
 arch/arm/cpu/arm920t/start.S                       |   10 +-
 arch/arm/cpu/arm925t/start.S                       |   10 +-
 arch/arm/cpu/arm926ejs/at91/cpu.c                  |   48 +-
 arch/arm/cpu/arm926ejs/kirkwood/cpu.c              |   34 +-
 arch/arm/cpu/arm926ejs/kirkwood/dram.c             |   38 +
 arch/arm/cpu/arm926ejs/orion5x/cpu.c               |  112 ++--
 arch/arm/cpu/arm926ejs/orion5x/timer.c             |    6 +-
 arch/arm/cpu/arm926ejs/start.S                     |   10 +-
 arch/arm/cpu/arm946es/start.S                      |    8 +-
 arch/arm/cpu/arm_intcm/start.S                     |   10 +-
 arch/arm/cpu/armv7/Makefile                        |    3 +-
 arch/arm/cpu/armv7/omap-common/Makefile            |    1 -
 arch/arm/cpu/armv7/start.S                         |    8 +-
 arch/arm/cpu/armv7/{omap-common => }/syslib.c      |    0
 arch/arm/cpu/ixp/start.S                           |   10 +-
 arch/arm/cpu/lh7a40x/start.S                       |   11 +-
 arch/arm/cpu/pxa/start.S                           |    8 +-
 arch/arm/cpu/s3c44b0/start.S                       |   12 +-
 arch/arm/cpu/sa1100/start.S                        |   10 +-
 arch/arm/include/asm/arch-arm925t/sizes.h          |   50 --
 arch/arm/include/asm/arch-arm926ejs/sizes.h        |   51 --
 arch/arm/include/asm/arch-armv7/sysctrl.h          |   70 ++
 .../arm/include/asm/arch-armv7/systimer.h          |   54 +-
 .../arm/include/asm/arch-armv7/wdt.h               |   57 +-
 arch/arm/include/asm/arch-at91/at91_emac.h         |    2 +-
 arch/arm/include/asm/arch-kirkwood/cpu.h           |    2 +
 arch/arm/include/asm/arch-mx31/mx31-regs.h         |   14 +-
 arch/arm/include/asm/arch-mx31/mx31.h              |   25 -
 arch/arm/include/asm/arch-mx51/imx-regs.h          |   26 +-
 arch/arm/include/asm/arch-mx51/mx51_pins.h         |   44 ++
 arch/arm/include/asm/arch-mx51/sys_proto.h         |    1 +
 arch/arm/include/asm/arch-omap/sizes.h             |   52 --
 arch/arm/include/asm/arch-omap24xx/omap2420.h      |    2 +-
 arch/arm/include/asm/arch-omap24xx/sizes.h         |   49 --
 arch/arm/include/asm/arch-orion5x/cpu.h            |    1 +
 arch/arm/include/asm/sizes.h                       |    5 +-
 board/Marvell/guruplug/guruplug.c                  |   11 -
 board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c    |   11 -
 board/Marvell/openrd_base/openrd_base.c            |   11 -
 board/Marvell/rd6281a/rd6281a.c                    |   11 -
 board/Marvell/sheevaplug/sheevaplug.c              |   11 -
 board/armltd/integrator/split_by_variant.sh        |  129 ++--
 board/armltd/vexpress/Makefile                     |   49 ++
 board/armltd/vexpress/ca9x4_ct_vxp.c               |  220 ++++++
 board/armltd/vexpress/config.mk                    |   23 +
 board/armltd/vexpress/u-boot.lds                   |   65 ++
 board/davedenx/qong/qong.c                         |   29 +-
 board/freescale/mx51evk/mx51evk.c                  |    2 -
 board/ttcontrol/vision2/Makefile                   |   48 ++
 board/ttcontrol/vision2/config.mk                  |   25 +
 board/ttcontrol/vision2/imximage_hynix.cfg         |  209 ++++++
 board/ttcontrol/vision2/vision2.c                  |  711 ++++++++++++++++> ++++
 boards.cfg                                         |    2 +
 drivers/block/mvsata_ide.c                         |   42 +-
 drivers/gpio/Makefile                              |    2 +-
 drivers/gpio/{mx31_gpio.c => mxc_gpio.c}           |   47 +-
 drivers/misc/fsl_pmic.c                            |   10 +-
 drivers/net/at91_emac.c                            |   22 +-
 drivers/serial/atmel_usart.c                       |   36 +-
 drivers/serial/atmel_usart.h                       |   56 +-
 drivers/serial/serial_mxc.c                        |    7 +-
 drivers/serial/serial_pl01x.c                      |   93 +--
 drivers/spi/mxc_spi.c                              |  168 ++++--
 include/configs/ca9x4_ct_vxp.h                     |  196 ++++++
 include/configs/da850evm.h                         |    1 -
 include/configs/guruplug.h                         |  103 +---
 include/configs/h2_p2_dbg_board.h                  |    2 +-
 include/configs/imx27lite-common.h                 |    3 +-
 include/configs/imx31_litekit.h                    |    4 +-
 include/configs/imx31_phycore.h                    |    2 +-
 include/configs/keymile-common.h                   |    1 +
 include/configs/km_arm.h                           |    2 +-
 include/configs/mv-common.h                        |  230 +++++++
 include/configs/mv88f6281gtw_ge.h                  |  120 +---
 include/configs/mx31ads.h                          |    4 +-
 include/configs/mx31pdk.h                          |    4 +-
 include/configs/mx51evk.h                          |    2 +-
 include/configs/omap1510.h                         |    2 +-
 include/configs/omap3_beagle.h                     |    3 +-
 include/configs/omap730.h                          |    2 +-
 include/configs/openrd_base.h                      |  146 +----
 include/configs/qong.h                             |    9 +-
 include/configs/rd6281a.h                          |  101 +---
 include/configs/sheevaplug.h                       |  104 +---
 include/configs/tx25.h                             |    3 +-
 include/configs/vision2.h                          |  214 ++++++
 include/mc13892.h                                  |    3 +
 .../mx51evk/mx51evk.h => include/mxc_gpio.h        |   50 +-
 93 files changed, 2904 insertions(+), 1345 deletions(-)
 rename arch/arm/cpu/armv7/{omap-common => }/syslib.c (100%)
 delete mode 100644 arch/arm/include/asm/arch-arm925t/sizes.h
 delete mode 100644 arch/arm/include/asm/arch-arm926ejs/sizes.h
 create mode 100644 arch/arm/include/asm/arch-armv7/sysctrl.h
 copy board/freescale/mx51evk/mx51evk.h => arch/arm/include/asm/arch-armv> 7/systimer.h (55%)
 copy board/freescale/mx51evk/mx51evk.h => arch/arm/include/asm/arch-armv> 7/wdt.h (55%)
 delete mode 100644 arch/arm/include/asm/arch-omap/sizes.h
 delete mode 100644 arch/arm/include/asm/arch-omap24xx/sizes.h
 create mode 100644 board/armltd/vexpress/Makefile
 create mode 100644 board/armltd/vexpress/ca9x4_ct_vxp.c
 create mode 100644 board/armltd/vexpress/config.mk
 create mode 100644 board/armltd/vexpress/u-boot.lds
 create mode 100644 board/ttcontrol/vision2/Makefile
Quoted 8 lines
 create mode 100644 board/ttcontrol/vision2/config.mk
 create mode 100644 board/ttcontrol/vision2/imximage_hynix.cfg
 create mode 100644 board/ttcontrol/vision2/vision2.c
 rename drivers/gpio/{mx31_gpio.c => mxc_gpio.c} (63%)
 create mode 100644 include/configs/ca9x4_ct_vxp.h
 create mode 100644 include/configs/mv-common.h
 create mode 100644 include/configs/vision2.h
 rename board/freescale/mx51evk/mx51evk.h => include/mxc_gpio.h (54%)

Applied.

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Stupidity, like virtue, is its own reward.
#2 lore raw

PATCH 1/1 Add sys_proto.h for arch-armv7

---

Hi.

U-boot won't build for Versatile Express (ca9x4_ct_vxp) without this patch. I'm not sure why the syslib is made armv7-specific, as it looks quite generic to me, but I'll leave this to the original authors.

 arch/arm/include/asm/arch-armv7/sys_proto.h |   31 +++++++++++++++++++++++++++
 1 files changed, 31 insertions(+), 0 deletions(-)
arch/arm/include/asm/arch-armv7/sys_proto.h +31 -0
index e69de29..d3a7b47 100644
@@ -0,0 +1,31 @@
+/*
+ * (C) Copyright 2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Richard Woodruff <[email protected]>
+ * Syed Mohammed Khasim <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+
+void sr32(void *, u32, u32, u32);
+u32 wait_on_value(u32, u32, void *, u32);
+void sdelay(unsigned long);
+
+#endif
#3 lore raw

PATCH 1/1 Add sys_proto.h for arch-armv7

Dear Alexey Zaytsev,

Quoted 5 lines · In message <[email protected]> you wrote:

---

Hi.

Quoted 8 lines

U-boot won't build for Versatile Express (ca9x4_ct_vxp) without this patch. I'm not sure why the syslib is made armv7-specific, as it looks quite generic to me, but I'll leave this to the original authors.

 arch/arm/include/asm/arch-armv7/sys_proto.h |   31 +++++++++++++++++++++++++++
 1 files changed, 31 insertions(+), 0 deletions(-)

NAK. This needs better cleanup.

Instead of adding yet another header file just to fix this current issue, this should really be cleaned up.

We aleady have such prototype declarations in

arch/arm/include/asm/arch-omap24xx/sys_proto.h arch/arm/include/asm/arch-omap3/sys_proto.h
and arch/arm/include/asm/arch-omap4/sys_proto.h

And we have implementations in

arch/arm/cpu/armv7/syslib.c
board/apollon/sys_info.c
and board/ti/omap2420h4/sys_info.c

All this needs to be moved to a single, common place.

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Every program has at least one bug and can be shortened by  at  least
one  instruction  --  from  which,  by induction, one can deduce that
every program can be reduced to one instruction which doesn't work.
#4 lore raw

PATCH 1/1 Add sys_proto.h for arch-armv7

Quoted 14 lines · Wolfgang Denk

Dear Alexey Zaytsev,

Quoted 11 lines · In message <[email protected]> you wrote:

---

Hi.

U-boot won't build for Versatile Express (ca9x4_ct_vxp) without this patch. I'm not sure why the syslib is made armv7-specific, as it looks quite generic to me, but I'll leave this to the original authors.

Quoted 5 lines
Quoted 2 lines

?arch/arm/include/asm/arch-armv7/sys_proto.h | ? 31 +++++++++++++++++++++++++++ ?1 files changed, 31 insertions(+), 0 deletions(-)

NAK. ?This needs better cleanup.

Well, I'm just a simple user who wants his u-boot to build, don't know much about programmin' ;)

Quoted 2 lines

Instead of adding yet another header file just to fix this current issue, this should really be cleaned up.

I totally agree, but could you please rise the issue with the involved maintainers, and fix the vexpress build in the mean time? Or also break the build for the omap boards?

#5 lore raw

PATCH 1/1 Add sys_proto.h for arch-armv7

Dear Alexey Zaytsev,

Quoted 15 lines · In message <[email protected]> you…
Quoted 11 lines
Quoted 9 lines

U-boot won't build for Versatile Express (ca9x4_ct_vxp) without this patch. I'm not sure why the syslib is made armv7-specific, as it looks quite generic to me, but I'll leave this to the original authors.

arch/arm/include/asm/arch-armv7/sys_proto.h | 31 +++++++++++++++++++++++++++

1 files changed, 31 insertions(+), 0 deletions(-)

NAK. This needs better cleanup.

Well, I'm just a simple user who wants his u-boot to build, don't know much about programmin' ;)

Quoted 6 lines
Quoted 2 lines

Instead of adding yet another header file just to fix this current issue, this should really be cleaned up.

I totally agree, but could you please rise the issue with the involved maintainers, and fix the vexpress build in the mean time? Or also break the build for the omap boards?

Sometimes poor code sneaks in unnoticed. It starts spreading, until it gets noticed. This time you got hit, sorry for that. But that's how it goes. Many of us have been in similar situations before.

We need to fix this. I will not have yet another such file added.

Dear Sandeep,

do you happen to have this on your to-do list?

For reference, here is what I complained about:
http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/86504/focus=86664

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Everything should be made as simple as possible, but not simpler."
                                                    - Albert Einstein