Pull request: u-boot-arm
The following changes since commit bfc7bea6adc46e1db2f5a5e3464d7652ed67c864:
Merge branch 'master' of git://git.denx.de/u-boot-x86 (2010-10-11 10:00:34 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Albert Aribaud (6):
arm: bugfix: replace ble with blo in start.S files
orion5x: fix relocation-incompatible code
mvsata_ide: adjust port init sequence
orion5x: optimize window size computation
mvsata_ide: adjust port init sequence
orion5x: optimize window size computation
Alexander Stein (1):
at91: Add arch_preboot_os which disables PIT in a faster way
Andreas Bie?mann (6):
at91_emac.c: fix 'Warning: eth device name has a space!' at91_emac.c: poll for IDLE when writing PHY at91_emac.h: fix typo in register definition
atmel_usart: change register access to C structure arch/arm/include/asm/sizes.h: cleanups board/armltd/integrator/split_by_variant.sh: fix 'echo -n'
Ben Gardiner (1):
ARM: relocation: don't undef CONFIG_SYS_ARM_WITHOUT_RELOC
Heiko Schocher (1):
ARM: relocation: fix typo in comment
Matt Waddel (2):
ARMV7: Versatile Express Coretile CortexA9x4 support
ARMV7: Fixed baudrate setting in pl01x driver
Prafulla Wadaskar (8):
Kirkwood: print_cpuinfo fixed for valid devid revid
Kirkwood: dram_init is moved to dram.c
kirkwood: added common config file mv-common.h
Kirkwood: Changes specific to ARM relocation support
Kirkwood: print_cpuinfo fixed for valid devid revid
Kirkwood: dram_init is moved to dram.c
kirkwood: added common config file mv-common.h
Kirkwood: Changes specific to ARM relocation support
Reinhard Meyer (1):
AT91: convert cpu.c to struct SoC access
Stefano Babic (10):
Use common function to set GPIOs for MX3 and MX5
ARM: Use syslib functions for all CORTEXA8
MX51: Added pins definition to set up pads
MX51: add structure to access System Reset Controller
MXC: Add watchdog support to serial driver
MX51: Drop unused header file for mx51evk
MXC: Correct SPI_CPOL setting in SPI driver
MXC: Fix byte-ordering in SPI driver for i.MX31/i.MX51
MX51: Register definitions cannot be included in board config file
MX51: Support for TTECH vision2 board
Wolfgang Denk (3):
Merge branch 'master' of git://git.denx.de/u-boot-imx
Merge branch 'at91' of git://git.denx.de/u-boot-atmel
Merge branch 'master' of git://git.denx.de/u-boot-marvell
MAINTAINERS | 5 +
MAKEALL | 1 +
arch/arm/cpu/arm1136/start.S | 8 +-
arch/arm/cpu/arm1176/start.S | 10 +-
arch/arm/cpu/arm720t/start.S | 10 +-
arch/arm/cpu/arm920t/start.S | 10 +-
arch/arm/cpu/arm925t/start.S | 10 +-
arch/arm/cpu/arm926ejs/at91/cpu.c | 48 +-
arch/arm/cpu/arm926ejs/kirkwood/cpu.c | 34 +-
arch/arm/cpu/arm926ejs/kirkwood/dram.c | 38 +
arch/arm/cpu/arm926ejs/orion5x/cpu.c | 112 ++--
arch/arm/cpu/arm926ejs/orion5x/timer.c | 6 +-
arch/arm/cpu/arm926ejs/start.S | 10 +-
arch/arm/cpu/arm946es/start.S | 8 +-
arch/arm/cpu/arm_intcm/start.S | 10 +-
arch/arm/cpu/armv7/Makefile | 3 +-
arch/arm/cpu/armv7/omap-common/Makefile | 1 -
arch/arm/cpu/armv7/start.S | 8 +-
arch/arm/cpu/armv7/{omap-common => }/syslib.c | 0
arch/arm/cpu/ixp/start.S | 10 +-
arch/arm/cpu/lh7a40x/start.S | 11 +-
arch/arm/cpu/pxa/start.S | 8 +-
arch/arm/cpu/s3c44b0/start.S | 12 +-
arch/arm/cpu/sa1100/start.S | 10 +-
arch/arm/include/asm/arch-arm925t/sizes.h | 50 --
arch/arm/include/asm/arch-arm926ejs/sizes.h | 51 --
arch/arm/include/asm/arch-armv7/sysctrl.h | 70 ++
.../arm/include/asm/arch-armv7/systimer.h | 54 +-
.../arm/include/asm/arch-armv7/wdt.h | 57 +-
arch/arm/include/asm/arch-at91/at91_emac.h | 2 +-
arch/arm/include/asm/arch-kirkwood/cpu.h | 2 +
arch/arm/include/asm/arch-mx31/mx31-regs.h | 14 +-
arch/arm/include/asm/arch-mx31/mx31.h | 25 -
arch/arm/include/asm/arch-mx51/imx-regs.h | 26 +-
arch/arm/include/asm/arch-mx51/mx51_pins.h | 44 ++
arch/arm/include/asm/arch-mx51/sys_proto.h | 1 +
arch/arm/include/asm/arch-omap/sizes.h | 52 --
arch/arm/include/asm/arch-omap24xx/omap2420.h | 2 +-
arch/arm/include/asm/arch-omap24xx/sizes.h | 49 --
arch/arm/include/asm/arch-orion5x/cpu.h | 1 +
arch/arm/include/asm/sizes.h | 5 +-
board/Marvell/guruplug/guruplug.c | 11 -
board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 11 -
board/Marvell/openrd_base/openrd_base.c | 11 -
board/Marvell/rd6281a/rd6281a.c | 11 -
board/Marvell/sheevaplug/sheevaplug.c | 11 -
board/armltd/integrator/split_by_variant.sh | 129 ++--
board/armltd/vexpress/Makefile | 49 ++
board/armltd/vexpress/ca9x4_ct_vxp.c | 220 ++++++
board/armltd/vexpress/config.mk | 23 +
board/armltd/vexpress/u-boot.lds | 65 ++
board/davedenx/qong/qong.c | 29 +-
board/freescale/mx51evk/mx51evk.c | 2 -
board/ttcontrol/vision2/Makefile | 48 ++
board/ttcontrol/vision2/config.mk | 25 +
board/ttcontrol/vision2/imximage_hynix.cfg | 209 ++++++
board/ttcontrol/vision2/vision2.c | 711 ++++++++++++++++++++
boards.cfg | 2 +
drivers/block/mvsata_ide.c | 42 +-
drivers/gpio/Makefile | 2 +-
drivers/gpio/{mx31_gpio.c => mxc_gpio.c} | 47 +-
drivers/misc/fsl_pmic.c | 10 +-
drivers/net/at91_emac.c | 22 +-
drivers/serial/atmel_usart.c | 36 +-
drivers/serial/atmel_usart.h | 56 +-
drivers/serial/serial_mxc.c | 7 +-
drivers/serial/serial_pl01x.c | 93 +--
drivers/spi/mxc_spi.c | 168 ++++--
include/configs/ca9x4_ct_vxp.h | 196 ++++++
include/configs/da850evm.h | 1 -
include/configs/guruplug.h | 103 +---
include/configs/h2_p2_dbg_board.h | 2 +-
include/configs/imx27lite-common.h | 3 +-
include/configs/imx31_litekit.h | 4 +-
include/configs/imx31_phycore.h | 2 +-
include/configs/keymile-common.h | 1 +
include/configs/km_arm.h | 2 +-
include/configs/mv-common.h | 230 +++++++
include/configs/mv88f6281gtw_ge.h | 120 +---
include/configs/mx31ads.h | 4 +-
include/configs/mx31pdk.h | 4 +-
include/configs/mx51evk.h | 2 +-
include/configs/omap1510.h | 2 +-
include/configs/omap3_beagle.h | 3 +-
include/configs/omap730.h | 2 +-
include/configs/openrd_base.h | 146 +----
include/configs/qong.h | 9 +-
include/configs/rd6281a.h | 101 +---
include/configs/sheevaplug.h | 104 +---
include/configs/tx25.h | 3 +-
include/configs/vision2.h | 214 ++++++
include/mc13892.h | 3 +
.../mx51evk/mx51evk.h => include/mxc_gpio.h | 50 +-
93 files changed, 2904 insertions(+), 1345 deletions(-)
rename arch/arm/cpu/armv7/{omap-common => }/syslib.c (100%)
delete mode 100644 arch/arm/include/asm/arch-arm925t/sizes.h
delete mode 100644 arch/arm/include/asm/arch-arm926ejs/sizes.h
create mode 100644 arch/arm/include/asm/arch-armv7/sysctrl.h
copy board/freescale/mx51evk/mx51evk.h => arch/arm/include/asm/arch-armv7/systimer.h (55%)
copy board/freescale/mx51evk/mx51evk.h => arch/arm/include/asm/arch-armv7/wdt.h (55%)
delete mode 100644 arch/arm/include/asm/arch-omap/sizes.h
delete mode 100644 arch/arm/include/asm/arch-omap24xx/sizes.h
create mode 100644 board/armltd/vexpress/Makefile
create mode 100644 board/armltd/vexpress/ca9x4_ct_vxp.c
create mode 100644 board/armltd/vexpress/config.mk
create mode 100644 board/armltd/vexpress/u-boot.lds
create mode 100644 board/ttcontrol/vision2/Makefile
create mode 100644 board/ttcontrol/vision2/config.mk
create mode 100644 board/ttcontrol/vision2/imximage_hynix.cfg
create mode 100644 board/ttcontrol/vision2/vision2.c
rename drivers/gpio/{mx31_gpio.c => mxc_gpio.c} (63%)
create mode 100644 include/configs/ca9x4_ct_vxp.h
create mode 100644 include/configs/mv-common.h
create mode 100644 include/configs/vision2.h
rename board/freescale/mx51evk/mx51evk.h => include/mxc_gpio.h (54%)Best regards,
Wolfgang Denk
Signature · 8 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Making files is easy under the UNIX operating system. Therefore, users tend to create numerous files using large amounts of file space. It has been said that the only standard thing about all UNIX systems is the message-of-the-day telling users to clean up their files. - System V.2 administrator's guide
Wolfgang Denk
AppliedQuoted 174 lines · In message <[email protected]> you wrote:
The following changes since commit
bfc7bea6adc46e1db2f5a5e3464d7652ed67c864:Merge branch 'master' of
git://git.denx.de/u-boot-x86(2010-10-11 10:00:34 +0200)are available in the git repository at:
git://git.denx.de/u-boot-arm.gitmasterAlbert Aribaud (6):
arm: bugfix: replace ble with blo instart.Sfiles
orion5x: fix relocation-incompatible code
mvsata_ide: adjust port init sequence
orion5x: optimize window size computation
mvsata_ide: adjust port init sequence
orion5x: optimize window size computationAlexander Stein (1):
at91: Addarch_preboot_oswhich disables PIT in a faster wayAndreas Bie?mann (6):
at91_emac.c: fix 'Warning: eth device name has a space!'at91_emac.c: poll for IDLE when writing PHYat91_emac.h: fix typo in register definition
atmel_usart: change register access to C structurearch/arm/include/asm/sizes.h: cleanupsboard/armltd/integrator/split_by_variant.sh: fix 'echo -n'Ben Gardiner (1):
ARM: relocation: don't undefCONFIG_SYS_ARM_WITHOUT_RELOCHeiko Schocher (1):
ARM: relocation: fix typo in commentMatt Waddel (2):
ARMV7: Versatile Express Coretile CortexA9x4 support
ARMV7: Fixed baudrate setting in pl01x driverPrafulla Wadaskar (8):
Kirkwood:print_cpuinfofixed for valid devid revid
Kirkwood:dram_initis moved todram.c
kirkwood: added common config filemv-common.h
Kirkwood: Changes specific to ARM relocation support
Kirkwood:print_cpuinfofixed for valid devid revid
Kirkwood:dram_initis moved todram.c
kirkwood: added common config filemv-common.h
Kirkwood: Changes specific to ARM relocation supportReinhard Meyer (1):
AT91: convertcpu.cto struct SoC accessStefano Babic (10):
Use common function to set GPIOs for MX3 and MX5
ARM: Use syslib functions for all CORTEXA8
MX51: Added pins definition to set up pads
MX51: add structure to access System Reset Controller
MXC: Add watchdog support to serial driver
MX51: Drop unused header file for mx51evk
MXC: CorrectSPI_CPOLsetting in SPI driver
MXC: Fix byte-ordering in SPI driver for i.MX31/i.MX51
MX51: Register definitions cannot be included in board config file
MX51: Support for TTECH vision2 boardWolfgang Denk (3):
Merge branch 'master' ofgit://git.denx.de/u-boot-imx
Merge branch 'at91' ofgit://git.denx.de/u-boot-atmel
Merge branch 'master' ofgit://git.denx.de/u-boot-marvellMAINTAINERS | 5 + MAKEALL | 1 + arch/arm/cpu/arm1136/start.S | 8 +- arch/arm/cpu/arm1176/start.S | 10 +- arch/arm/cpu/arm720t/start.S | 10 +- arch/arm/cpu/arm920t/start.S | 10 +- arch/arm/cpu/arm925t/start.S | 10 +- arch/arm/cpu/arm926ejs/at91/cpu.c | 48 +- arch/arm/cpu/arm926ejs/kirkwood/cpu.c | 34 +- arch/arm/cpu/arm926ejs/kirkwood/dram.c | 38 + arch/arm/cpu/arm926ejs/orion5x/cpu.c | 112 ++-- arch/arm/cpu/arm926ejs/orion5x/timer.c | 6 +- arch/arm/cpu/arm926ejs/start.S | 10 +- arch/arm/cpu/arm946es/start.S | 8 +- arch/arm/cpu/arm_intcm/start.S | 10 +- arch/arm/cpu/armv7/Makefile | 3 +- arch/arm/cpu/armv7/omap-common/Makefile | 1 - arch/arm/cpu/armv7/start.S | 8 +- arch/arm/cpu/armv7/{omap-common => }/syslib.c | 0 arch/arm/cpu/ixp/start.S | 10 +- arch/arm/cpu/lh7a40x/start.S | 11 +- arch/arm/cpu/pxa/start.S | 8 +- arch/arm/cpu/s3c44b0/start.S | 12 +- arch/arm/cpu/sa1100/start.S | 10 +- arch/arm/include/asm/arch-arm925t/sizes.h | 50 -- arch/arm/include/asm/arch-arm926ejs/sizes.h | 51 -- arch/arm/include/asm/arch-armv7/sysctrl.h | 70 ++ .../arm/include/asm/arch-armv7/systimer.h | 54 +- .../arm/include/asm/arch-armv7/wdt.h | 57 +- arch/arm/include/asm/arch-at91/at91_emac.h | 2 +- arch/arm/include/asm/arch-kirkwood/cpu.h | 2 + arch/arm/include/asm/arch-mx31/mx31-regs.h | 14 +- arch/arm/include/asm/arch-mx31/mx31.h | 25 - arch/arm/include/asm/arch-mx51/imx-regs.h | 26 +- arch/arm/include/asm/arch-mx51/mx51_pins.h | 44 ++ arch/arm/include/asm/arch-mx51/sys_proto.h | 1 + arch/arm/include/asm/arch-omap/sizes.h | 52 -- arch/arm/include/asm/arch-omap24xx/omap2420.h | 2 +- arch/arm/include/asm/arch-omap24xx/sizes.h | 49 -- arch/arm/include/asm/arch-orion5x/cpu.h | 1 + arch/arm/include/asm/sizes.h | 5 +- board/Marvell/guruplug/guruplug.c | 11 - board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 11 - board/Marvell/openrd_base/openrd_base.c | 11 - board/Marvell/rd6281a/rd6281a.c | 11 - board/Marvell/sheevaplug/sheevaplug.c | 11 - board/armltd/integrator/split_by_variant.sh | 129 ++-- board/armltd/vexpress/Makefile | 49 ++ board/armltd/vexpress/ca9x4_ct_vxp.c | 220 ++++++ board/armltd/vexpress/config.mk | 23 + board/armltd/vexpress/u-boot.lds | 65 ++ board/davedenx/qong/qong.c | 29 +- board/freescale/mx51evk/mx51evk.c | 2 - board/ttcontrol/vision2/Makefile | 48 ++ board/ttcontrol/vision2/config.mk | 25 + board/ttcontrol/vision2/imximage_hynix.cfg | 209 ++++++ board/ttcontrol/vision2/vision2.c | 711 ++++++++++++++++> ++++ boards.cfg | 2 + drivers/block/mvsata_ide.c | 42 +- drivers/gpio/Makefile | 2 +- drivers/gpio/{mx31_gpio.c => mxc_gpio.c} | 47 +- drivers/misc/fsl_pmic.c | 10 +- drivers/net/at91_emac.c | 22 +- drivers/serial/atmel_usart.c | 36 +- drivers/serial/atmel_usart.h | 56 +- drivers/serial/serial_mxc.c | 7 +- drivers/serial/serial_pl01x.c | 93 +-- drivers/spi/mxc_spi.c | 168 ++++-- include/configs/ca9x4_ct_vxp.h | 196 ++++++ include/configs/da850evm.h | 1 - include/configs/guruplug.h | 103 +--- include/configs/h2_p2_dbg_board.h | 2 +- include/configs/imx27lite-common.h | 3 +- include/configs/imx31_litekit.h | 4 +- include/configs/imx31_phycore.h | 2 +- include/configs/keymile-common.h | 1 + include/configs/km_arm.h | 2 +- include/configs/mv-common.h | 230 +++++++ include/configs/mv88f6281gtw_ge.h | 120 +--- include/configs/mx31ads.h | 4 +- include/configs/mx31pdk.h | 4 +- include/configs/mx51evk.h | 2 +- include/configs/omap1510.h | 2 +- include/configs/omap3_beagle.h | 3 +- include/configs/omap730.h | 2 +- include/configs/openrd_base.h | 146 +---- include/configs/qong.h | 9 +- include/configs/rd6281a.h | 101 +--- include/configs/sheevaplug.h | 104 +--- include/configs/tx25.h | 3 +- include/configs/vision2.h | 214 ++++++ include/mc13892.h | 3 + .../mx51evk/mx51evk.h => include/mxc_gpio.h | 50 +- 93 files changed, 2904 insertions(+), 1345 deletions(-) rename arch/arm/cpu/armv7/{omap-common => }/syslib.c (100%) delete mode 100644 arch/arm/include/asm/arch-arm925t/sizes.h delete mode 100644 arch/arm/include/asm/arch-arm926ejs/sizes.h create mode 100644 arch/arm/include/asm/arch-armv7/sysctrl.h copy board/freescale/mx51evk/mx51evk.h => arch/arm/include/asm/arch-armv> 7/systimer.h (55%) copy board/freescale/mx51evk/mx51evk.h => arch/arm/include/asm/arch-armv> 7/wdt.h (55%) delete mode 100644 arch/arm/include/asm/arch-omap/sizes.h delete mode 100644 arch/arm/include/asm/arch-omap24xx/sizes.h create mode 100644 board/armltd/vexpress/Makefile create mode 100644 board/armltd/vexpress/ca9x4_ct_vxp.c create mode 100644 board/armltd/vexpress/config.mk create mode 100644 board/armltd/vexpress/u-boot.lds create mode 100644 board/ttcontrol/vision2/Makefile
Quoted 8 lines
create mode 100644 board/ttcontrol/vision2/config.mk
create mode 100644 board/ttcontrol/vision2/imximage_hynix.cfg
create mode 100644 board/ttcontrol/vision2/vision2.c
rename drivers/gpio/{mx31_gpio.c => mxc_gpio.c} (63%)
create mode 100644 include/configs/ca9x4_ct_vxp.h
create mode 100644 include/configs/mv-common.h
create mode 100644 include/configs/vision2.h
rename board/freescale/mx51evk/mx51evk.h => include/mxc_gpio.h (54%)Applied.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Stupidity, like virtue, is its own reward.
PATCH 1/1 Add sys_proto.h for arch-armv7
---
Hi.
U-boot won't build for Versatile Express (ca9x4_ct_vxp) without this patch. I'm not sure why the syslib is made armv7-specific, as it looks quite generic to me, but I'll leave this to the original authors.
arch/arm/include/asm/arch-armv7/sys_proto.h | 31 +++++++++++++++++++++++++++ 1 files changed, 31 insertions(+), 0 deletions(-)
arch/arm/include/asm/arch-armv7/sys_proto.h +31 -0
@@ -0,0 +1,31 @@ +/* +* (C) Copyright 2008 +* Texas Instruments, <www.ti.com> +* +* Richard Woodruff <[email protected]> +* Syed Mohammed Khasim <[email protected]> +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#ifndef _SYS_PROTO_H_ +#define _SYS_PROTO_H_ + +void sr32 (void *,u32 ,u32 ,u32 ); +u32 wait_on_value (u32 ,u32 ,void *,u32 ); +void sdelay (unsigned long ); + +#endif
PATCH 1/1 Add sys_proto.h for arch-armv7
Dear Alexey Zaytsev,
Quoted 5 lines · In message <[email protected]> you wrote:
Signed-off-by Alexey Zaytsev <[email protected]>---
Hi.
Quoted 8 lines
U-boot won't build for Versatile Express (
ca9x4_ct_vxp) without this patch. I'm not sure why the syslib is made armv7-specific, as it looks quite generic to me, but I'll leave this to the original authors.arch/arm/include/asm/arch-armv7/sys_proto.h | 31 +++++++++++++++++++++++++++ 1 files changed, 31 insertions(+), 0 deletions(-)
NAK. This needs better cleanup.
Instead of adding yet another header file just to fix this current issue, this should really be cleaned up.
We aleady have such prototype declarations in
arch/arm/include/asm/arch-omap24xx/sys_proto.h arch/arm/include/asm/arch-omap3/sys_proto.h
and arch/arm/include/asm/arch-omap4/sys_proto.h
And we have implementations in
arch/arm/cpu/armv7/syslib.c
board/apollon/sys_info.c
and board/ti/omap2420h4/sys_info.c
All this needs to be moved to a single, common place.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Every program has at least one bug and can be shortened by at least one instruction -- from which, by induction, one can deduce that every program can be reduced to one instruction which doesn't work.
PATCH 1/1 Add sys_proto.h for arch-armv7
Quoted 14 lines · Wolfgang Denk
Dear Alexey Zaytsev,
Quoted 11 lines · In message <[email protected]> you wrote:
Signed-off-by Alexey Zaytsev <[email protected]>---
Hi.
U-boot won't build for Versatile Express (
ca9x4_ct_vxp) without this patch. I'm not sure why the syslib is made armv7-specific, as it looks quite generic to me, but I'll leave this to the original authors.
Quoted 5 lines
Quoted 2 lines
?arch/arm/include/asm/arch-armv7/sys_proto.h | ? 31 +++++++++++++++++++++++++++ ?1 files changed, 31 insertions(+), 0 deletions(-)
NAK. ?This needs better cleanup.
Well, I'm just a simple user who wants his u-boot to build, don't know much about programmin' ;)
Quoted 2 lines
Instead of adding yet another header file just to fix this current issue, this should really be cleaned up.
I totally agree, but could you please rise the issue with the involved maintainers, and fix the vexpress build in the mean time? Or also break the build for the omap boards?
PATCH 1/1 Add sys_proto.h for arch-armv7
Dear Alexey Zaytsev,
Quoted 15 lines · In message <[email protected]> you…
Quoted 11 lines
Quoted 9 lines
U-boot won't build for Versatile Express (
ca9x4_ct_vxp) without this patch. I'm not sure why the syslib is made armv7-specific, as it looks quite generic to me, but I'll leave this to the original authors.
arch/arm/include/asm/arch-armv7/sys_proto.h| 31 +++++++++++++++++++++++++++1 files changed, 31 insertions(+), 0 deletions(-)NAK. This needs better cleanup.
Well, I'm just a simple user who wants his u-boot to build, don't know much about programmin' ;)
Quoted 6 lines
Quoted 2 lines
Instead of adding yet another header file just to fix this current issue, this should really be cleaned up.
I totally agree, but could you please rise the issue with the involved maintainers, and fix the vexpress build in the mean time? Or also break the build for the omap boards?
Sometimes poor code sneaks in unnoticed. It starts spreading, until it gets noticed. This time you got hit, sorry for that. But that's how it goes. Many of us have been in similar situations before.
We need to fix this. I will not have yet another such file added.
Dear Sandeep,
do you happen to have this on your to-do list?
For reference, here is what I complained about:
http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/86504/focus=86664
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Everything should be made as simple as possible, but not simpler."
- Albert Einstein