Skip to contentSkip to conversation

iw: Add antenna configuration commands

PATCH Superseded Bruno Randolf 1 participant 1 message Nov 17, 2010

v8 of 9 Superseded Latest is v9 →

lore
Share & tools
lore
#0 lore raw

PATCH v8 1/1 iw: Add antenna configuration commands

Add command to set the antenna configuration (iw phyX set antenna ...) and include antenna setting in wiphy information (iw phyX info).

iw phyX set antenna all | <bitmap> | <tx bitmap> <rx bitmap>

v8: Simplfied option parser as requested.

---
 info.c |    7 +++++++
 phy.c  |   39 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 46 insertions(+), 0 deletions(-)
info.c +7 -0
index d842c26..0e7e69f 100644
@@ -168,6 +168,13 @@ static int print_phy_handler(struct nl_msg *msg, void *arg)
 		printf("\tCoverage class: %d (up to %dm)\n", coverage, 450 * coverage);
 	}
 
+	if (tb_msg[NL80211_ATTR_WIPHY_ANTENNA_TX] &&
+	    tb_msg[NL80211_ATTR_WIPHY_ANTENNA_RX]) {
+		printf("\tAntenna: TX %#x RX %#x\n",
+		       nla_get_u32(tb_msg[NL80211_ATTR_WIPHY_ANTENNA_TX]),
+		       nla_get_u32(tb_msg[NL80211_ATTR_WIPHY_ANTENNA_RX]));
+	}
+
 	if (tb_msg[NL80211_ATTR_SUPPORTED_IFTYPES]) {
 		printf("\tSupported interface modes:\n");
 		nla_for_each_nested(nl_mode, tb_msg[NL80211_ATTR_SUPPORTED_IFTYPES], rem_mode)
phy.c +39 -0
index 7c6c7c8..e3bd4e8 100644
@@ -307,3 +307,42 @@ COMMAND(set, txpower, "<auto|fixed|limit> [<tx power in mBm>]",
 COMMAND(set, txpower, "<auto|fixed|limit> [<tx power in mBm>]",
 	NL80211_CMD_SET_WIPHY, 0, CIB_NETDEV, handle_txpower,
 	"Specify transmit power level and setting type.");
+
+static int handle_antenna(struct nl80211_state *state,
+			  struct nl_cb *cb,
+			  struct nl_msg *msg,
+			  int argc, char **argv)
+{
+	char *end;
+	uint32_t tx_ant = 0, rx_ant = 0;
+
+	if (argc == 1 && strcmp(argv[0], "all") == 0) {
+		tx_ant = 0xffffffff;
+		rx_ant = 0xffffffff;
+	} else if (argc == 1) {
+		tx_ant = rx_ant = strtoul(argv[0], &end, 0);
+		if (*end)
+			return 1;
+	}
+	else if (argc == 2) {
+		tx_ant = strtoul(argv[0], &end, 0);
+		if (*end)
+			return 1;
+		rx_ant = strtoul(argv[1], &end, 0);
+		if (*end)
+			return 1;
+	} else
+		return 1;
+
+	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_ANTENNA_TX, tx_ant);
+	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_ANTENNA_RX, rx_ant);
+
+	return 0;
+
+ nla_put_failure:
+	return -ENOBUFS;
+}
+COMMAND(set, antenna, "<bitmap> | all | <tx bitmap> <rx bitmap>",
+	NL80211_CMD_SET_WIPHY, 0, CIB_PHY, handle_antenna,
+	"Set a bitmap of allowed antennas to use for TX and RX.\n"
+	"The driver may reject antenna configurations it cannot support.");