iw: Add antenna configuration
PATCH v9 1/1 iw: Add antenna configuration
Add command to set the antenna configuration (iw phyX set antenna ...) and include available antennas and antenna setting in wiphy information.
iw phyX info:
Available Antennas: TX 0x3 RX 0x3
Configured Antennas: TX 0x1 RX 0x1iw phyX set antenna <bitmap> | all | <tx bitmap> <rx bitmap>
Signed-off-by Bruno Randolf <[email protected]>
---
v9: Add available antennas
--- info.c | 12 ++++++++++++ phy.c | 39 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 51 insertions(+), 0 deletions(-)
info.c +12 -0
@@ -168,6 +168,18 @@ static int print_phy_handler(struct nl_msg *msg, void *arg)printf ("\tCoverage class: %d (up to %dm)\n" , coverage,450 * coverage); } +if (tb_msg[NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX ] && + tb_msg[NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX ]) +printf ("\tAvailable Antennas: TX %#x RX %#x\n" , +nla_get_u32 (tb_msg[NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX ]), +nla_get_u32 (tb_msg[NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX ])); + +if (tb_msg[NL80211_ATTR_WIPHY_ANTENNA_TX ] && + tb_msg[NL80211_ATTR_WIPHY_ANTENNA_RX ]) +printf ("\tConfigured Antennas: TX %#x RX %#x\n" , +nla_get_u32 (tb_msg[NL80211_ATTR_WIPHY_ANTENNA_TX ]), +nla_get_u32 (tb_msg[NL80211_ATTR_WIPHY_ANTENNA_RX ])); +if (tb_msg[NL80211_ATTR_SUPPORTED_IFTYPES ]) {printf ("\tSupported interface modes:\n" );nla_for_each_nested (nl_mode, tb_msg[NL80211_ATTR_SUPPORTED_IFTYPES ], rem_mode)
phy.c +39 -0
@@ -307,3 +307,42 @@ COMMAND(set, txpower, "<auto|fixed|limit> [<tx power in mBm>]",COMMAND (set, txpower,"<auto|fixed|limit> [<tx power in mBm>]" ,NL80211_CMD_SET_WIPHY ,0 ,CIB_NETDEV , handle_txpower,"Specify transmit power level and setting type." ); + +static int handle_antenna (struct nl80211_state *state, +struct nl_cb *cb, +struct nl_msg *msg, +int argc,char **argv) +{ +char *end; +uint32_t tx_ant =0 , rx_ant =0 ; + +if (argc ==1 &&strcmp (argv[0 ],"all" ) ==0 ) { + tx_ant =0xffffffff ; + rx_ant =0xffffffff ; + }else if (argc ==1 ) { + tx_ant = rx_ant =strtoul (argv[0 ], &end,0 ); +if (*end) +return 1 ; + } +else if (argc ==2 ) { + tx_ant =strtoul (argv[0 ], &end,0 ); +if (*end) +return 1 ; + rx_ant =strtoul (argv[1 ], &end,0 ); +if (*end) +return 1 ; + }else +return 1 ; + +NLA_PUT_U32 (msg,NL80211_ATTR_WIPHY_ANTENNA_TX , tx_ant); +NLA_PUT_U32 (msg,NL80211_ATTR_WIPHY_ANTENNA_RX , rx_ant); + +return 0 ; + + nla_put_failure: +return -ENOBUFS ; +} +COMMAND (set, antenna,"<bitmap> | all | <tx bitmap> <rx bitmap>" , +NL80211_CMD_SET_WIPHY ,0 ,CIB_PHY , handle_antenna, +"Set a bitmap of allowed antennas to use for TX and RX.\n" +"The driver may reject antenna configurations it cannot support." );