arch/powerpc/cpu/ppc4xx/start.S: comment makes little sense
Dear Stefan,
I think this comment in arch/powerpc/cpu/ppc4xx/start.S needs a bit of cleanup:
51 /* U-Boot - Startup Code for AMCC 4xx PowerPC based Embedded Boards
52 * 53 * 54 * The processor starts at 0xfffffffc and the code is executed 55 * from flash/rom. 56 * in memory, but as long we don't jump around before relocating. 57 * board_init lies at a quite high address and when the cpu has 58 * jumped there, everything is ok. 59 * This works because the cpu gives the FLASH (CS0) the whole 60 * address space at startup, and board_init lies as a echo of 61 * the flash somewhere up there in the memorymap. 62 * 63 * board_init will change CS0 to be positioned at the correct 64 * address and (s)dram will be positioned at address 0 65 */
All this makes pretty little sense to me.
Thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de There are some things worth dying for. -- Kirk, "Errand of Mercy", stardate 3201.7
Hi Wolfgang,
Quoted 19 lines · On Sunday 21 November 2010 20:17:01 Wolfgang Denk wrote:
I think this comment in
arch/powerpc/cpu/ppc4xx/start.Sneeds a bit of cleanup:51 /* U-Boot - Startup Code for AMCC 4xx PowerPC based Embedded Boards
52 * 53 * 54 * The processor starts at 0xfffffffc and the code is executed 55 * from flash/rom. 56 * in memory, but as long we don't jump around before relocating. 57 * board_init lies at a quite high address and when the cpu has 58 * jumped there, everything is ok. 59 * This works because the cpu gives the FLASH (CS0) the whole 60 * address space at startup, and board_init lies as a echo of 61 * the flash somewhere up there in the memorymap. 62 * 63 * board_init will change CS0 to be positioned at the correct 64 * address and (s)dram will be positioned at address 0 65 */
Quoted 1 line
All this makes pretty little sense to me.
Agreed. I'll try to get a better description out soon.
Cheers,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de