Devkit8000: Fix build after introduction of GENERATED_GBL_DATA_SIZE
PATCH 1/1 Devkit8000: Fix build after introduction of GENERATED_GBL_DATA_SIZE
This patch fixes the issue by defining and using CONFIG_SYS_INIT_RAM_SIZE and CONFIG_SYS_INIT_RAM_ADDR.
This patch adopts the
commit 31bfcf1c5776df3d90286aa15104c45096d53dc6 from Steve Sakoman and Sandeep Paulraj on Devkit8000.
--- include/configs/devkit8000.h | 6 +++++- 1 files changed, 5 insertions(+), 1 deletions(-)
include/configs/devkit8000.h +5 -1
@@ -308,6 +308,10 @@ extern unsigned int boot_flash_type;#endif #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 +#define CONFIG_SYS_INIT_RAM_SIZE 0x800 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE)#endif /* __CONFIG_H */
Signature · 1 line
1.7.3.2
Wolfgang Denk
AppliedPATCH 1/1 Devkit8000: Fix build after introduction of GENERATED_GBL_DATA_SIZE
Dear Thomas Weber,
Quoted 11 lines · In message <[email protected]> you wrote:
This patch fixes the issue by defining and using
CONFIG_SYS_INIT_RAM_SIZEandCONFIG_SYS_INIT_RAM_ADDR.This patch adopts the
commit31bfcf1c5776df3d90286aa15104c45096d53dc6from Steve Sakoman and Sandeep Paulraj on Devkit8000.Signed-off-by Thomas Weber <[email protected]>--- include/configs/devkit8000.h | 6 +++++- 1 files changed, 5 insertions(+), 1 deletions(-)
Applied, thanks.
Sandeep - hope this is OK with your.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
What about WRITING it first and rationalizing it afterwords? :-)
- Larry Wall in <[email protected]>Paulraj
PATCH 1/1 Devkit8000: Fix build after introduction of GENERATED_GBL_DATA_SIZE
Quoted 7 lines
Applied, thanks.
Sandeep - hope this is OK with your.
Best regards,
Wolfgang Denk
no problem.
I was going to send a pull request for this along with my 3 patches
Are you going to pull the 3 patches i sent yesterday or do you want a pull request
my patches will result in more boards building
Thanks,
Sandeep
PATCH 1/1 Devkit8000: Fix build after introduction of GENERATED_GBL_DATA_SIZE
Dear "Paulraj, Sandeep",
Quoted 8 lines · In message <[email protected]> you…
I was going to send a pull request for this along with my 3 patches
Are you going to pull the 3 patches i sent yesterday or do you want a pull = request
my patches will result in more boards building
If I have your "go" I can apply these directly, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Until you walk a mile in another man's moccasins, you can't imagine the smell.