Skip to contentSkip to conversation

DaVinci DM355: Fix for ARM Relocation support

PATCH New s-paulraj at ti.com 3 participants 4 messages Nov 27, 2010 – Nov 28, 2010

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 DaVinci DM355: Fix for ARM Relocation support

From: Sandeep Paulraj <[email protected]>

Fix for ARM Relocation support

---
 include/configs/davinci_dm355evm.h |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)
include/configs/davinci_dm355evm.h +6 -0
index 8a69052..90f8e7c 100644
@@ -189,4 +189,10 @@
 #define MTDPARTS_DEFAULT	\
 	"mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST
 
+#define CONFIG_MAX_RAM_BANK_SIZE	(256 << 20)	/* 256 MB */
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR		\
+	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
+
 #endif /* __CONFIG_H */
Signature · 1 line
1.6.0.4
#1 lore raw

PATCH 1/1 DaVinci DM355: Fix for ARM Relocation support

Quoted 30 lines

From: Sandeep Paulraj <[email protected]>

Fix for ARM Relocation support

---
 include/configs/davinci_dm355evm.h |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)
include/configs/davinci_dm355evm.h +6 -1
index 8a69052..90f8e7c 100644
@@ -189,4 +189,10 @@
 #define MTDPARTS_DEFAULT	\
 	"mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST
 
+#define CONFIG_MAX_RAM_BANK_SIZE	(256 << 20)	/* 256 MB */
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR		\
+	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
+
 #endif /* __CONFIG_H */
--
Quoted 1 line

1.6.0.4

I have sent three patches.

Is it OK if I send a pull request immediately?

Regards,
Sandeep

#2 lore raw

PATCH 1/1 DaVinci DM355: Fix for ARM Relocation support

Dear "Paulraj, Sandeep",

Quoted 4 lines · In message <[email protected]> you…

I have sent three patches.

Is it OK if I send a pull request immediately?

under normal condistions we should wait a couple of days. But in this specific case your patches un-break boards, so they are obvious improvements and pretty urgent as well. This is reason enough toi shorten the time limits.

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
At the source of every error which is blamed on the computer you will
find at least two human errors, including the error of blaming it  on
the computer.
#3 lore raw

PATCH 1/1 DaVinci DM355: Fix for ARM Relocation support

In reply to s-paulraj at ti.com

Dear s-paulraj at ti.com,

Quoted 8 lines · In message <[email protected]> you wrote:

Fix for ARM Relocation support

---
 include/configs/davinci_dm355evm.h |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Fascinating is a word I use for the unexpected.
	-- Spock, "The Squire of Gothos", stardate 2124.5