DaVinci DM355: Fix for ARM Relocation support
PATCH 1/1 DaVinci DM355: Fix for ARM Relocation support
From: Sandeep Paulraj <[email protected]>
Fix for ARM Relocation support
--- include/configs/davinci_dm355evm.h | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-)
include/configs/davinci_dm355evm.h +6 -0
@@ -189,4 +189,10 @@#define MTDPARTS_DEFAULT \ "mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST +#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20)/* 256 MB */ + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) +#endif /* __CONFIG_H */
Signature · 1 line
1.6.0.4
Paulraj
PATCH 1/1 DaVinci DM355: Fix for ARM Relocation support
Quoted 30 lines
From: Sandeep Paulraj <[email protected]>
Fix for ARM Relocation support
Signed-off-by Sandeep Paulraj <[email protected]>--- include/configs/davinci_dm355evm.h | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-)include/configs/davinci_dm355evm.h +6
-1@@ -189,4 +189,10 @@#define MTDPARTS_DEFAULT \ "mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST +#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20)/* 256 MB */ + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) +#endif /* __CONFIG_H */ --
Quoted 1 line
1.6.0.4
I have sent three patches.
Is it OK if I send a pull request immediately?
Regards,
Sandeep
PATCH 1/1 DaVinci DM355: Fix for ARM Relocation support
Dear "Paulraj, Sandeep",
Quoted 4 lines · In message <[email protected]> you…
I have sent three patches.
Is it OK if I send a pull request immediately?
under normal condistions we should wait a couple of days. But in this specific case your patches un-break boards, so they are obvious improvements and pretty urgent as well. This is reason enough toi shorten the time limits.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de At the source of every error which is blamed on the computer you will find at least two human errors, including the error of blaming it on the computer.
Wolfgang Denk
AppliedPATCH 1/1 DaVinci DM355: Fix for ARM Relocation support
In reply to s-paulraj at ti.comDear s-paulraj at ti.com,
Quoted 8 lines · In message <[email protected]> you wrote:
Fix for ARM Relocation support
Signed-off-by Sandeep Paulraj <[email protected]>--- include/configs/davinci_dm355evm.h | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Fascinating is a word I use for the unexpected. -- Spock, "The Squire of Gothos", stardate 2124.5