Skip to contentSkip to conversation

Please pull u-boot-atmel/for2010.12

U-Boot Applied Reinhard Meyer 3 participants 9 messages Dec 6, 2010 – Dec 8, 2010

lore
Share & tools
lore
#0 lore raw

Dear Wolfgang, Albert,

The following changes since commit 49733aa0b9d29803384ad4bce74985f4bbe7e9aa:
Wolfgang Denk (1):
Merge branch 'master' of /home/wd/git/u-boot/custodians

are available in the git repository at:

git://git.denx.de/u-boot-atmel.git for2010.12

Andreas Bie?mann (1):
arm920t/at91/reset: board_reset: define weak symbol

Reinhard Meyer (3):
AT91: gen_atmel_mci.c: fix bug when Slot B is used
AT91: fix EMAC gpio init in at91sam9260_devices.c
AT91: add TOP9000 support

andreas.devel at googlemail.com (4):
at91rm9200ek: add configure target for RAM boot
MAKEALL: fix AT91
arm920t/at91/timer: replace bss variables by gd
at91rm9200ek: fix SDRAM initialistation values

 MAINTAINERS                                       |    3 +-
 MAKEALL                                           |   18 +-
 arch/arm/cpu/arm920t/at91/reset.c                 |    8 +-
 arch/arm/cpu/arm920t/at91/timer.c                 |   29 +-
 arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c |    5 +
 arch/arm/include/asm/global_data.h                |    1 +
 board/atmel/at91rm9200ek/config.mk                |    2 -
 board/emk/top9000/Makefile                        |   54 ++++
 board/emk/top9000/spi.c                           |   61 ++++
 board/emk/top9000/top9000.c                       |  290 +++++++++++++++++++
 boards.cfg                                        |    5 +-
 drivers/mmc/gen_atmel_mci.c                       |    1 +
 include/configs/at91rm9200ek.h                    |   18 ++-
 include/configs/top9000.h                         |  314 +++++++++++++++++++++
 14 files changed, 771 insertions(+), 38 deletions(-)
 delete mode 100644 board/atmel/at91rm9200ek/config.mk
 create mode 100644 board/emk/top9000/Makefile
 create mode 100644 board/emk/top9000/spi.c
 create mode 100644 board/emk/top9000/top9000.c
 create mode 100644 include/configs/top9000.h

I think this time, it's still Wolfgang doing the pull to ARM, right?

Best Regards,
Reinhard

#1 lore raw

Hi Reinhard,

Le 06/12/2010 10:43, Reinhard Meyer a ?crit :

Quoted 1 line

I think this time, it's still Wolfgang doing the pull to ARM, right?

Correct.

Quoted 2 lines

Best Regards,
Reinhard

Amicalement,

Signature · 1 line
Albert.
#2 lore raw
In reply to Reinhard Meyer

Dear Reinhard Meyer,

Quoted 36 lines · In message <[email protected]> you wrote:

Dear Wolfgang, Albert,

The following changes since commit 49733aa0b9d29803384ad4bce74985f4bbe7e9aa:
Wolfgang Denk (1):
Merge branch 'master' of /home/wd/git/u-boot/custodians

are available in the git repository at:

git://git.denx.de/u-boot-atmel.git for2010.12

Andreas Bie?mann (1):
arm920t/at91/reset: board_reset: define weak symbol

Reinhard Meyer (3):
AT91: gen_atmel_mci.c: fix bug when Slot B is used
AT91: fix EMAC gpio init in at91sam9260_devices.c
AT91: add TOP9000 support

andreas.devel at googlemail.com (4):
at91rm9200ek: add configure target for RAM boot
MAKEALL: fix AT91
arm920t/at91/timer: replace bss variables by gd
at91rm9200ek: fix SDRAM initialistation values

 MAINTAINERS                                       |    3 +-
 MAKEALL                                           |   18 +-
 arch/arm/cpu/arm920t/at91/reset.c                 |    8 +-
 arch/arm/cpu/arm920t/at91/timer.c                 |   29 +-
 arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c |    5 +
 arch/arm/include/asm/global_data.h                |    1 +
 board/atmel/at91rm9200ek/config.mk                |    2 -
 board/emk/top9000/Makefile                        |   54 ++++
 board/emk/top9000/spi.c                           |   61 ++++
 board/emk/top9000/top9000.c                       |  290 +++++++++++++++++++
 boards.cfg                                        |    5 +-
 drivers/mmc/gen_atmel_mci.c                       |    1 +
Quoted 8 lines
 include/configs/at91rm9200ek.h                    |   18 ++-
 include/configs/top9000.h                         |  314 +++++++++++++++++++++
 14 files changed, 771 insertions(+), 38 deletions(-)
 delete mode 100644 board/atmel/at91rm9200ek/config.mk
 create mode 100644 board/emk/top9000/Makefile
 create mode 100644 board/emk/top9000/spi.c
 create mode 100644 board/emk/top9000/top9000.c
 create mode 100644 include/configs/top9000.h

Hm... what I see looks quite different:

 MAINTAINERS                                       |    3 +-
 MAKEALL                                           |   18 +-
 arch/arm/cpu/arm920t/at91/reset.c                 |    8 +-
 arch/arm/cpu/arm920t/at91/timer.c                 |   29 +-
 arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c |    5 +
 arch/arm/include/asm/global_data.h                |    1 +
 arch/powerpc/cpu/mpc83xx/start.S                  |    8 +
 arch/powerpc/lib/board.c                          |   11 +
 arch/sh/cpu/sh2/start.S                           |    8 +-
 arch/sh/cpu/sh3/start.S                           |    8 +-
 arch/sh/cpu/sh4/start.S                           |   10 +-
 board/atmel/at91rm9200ek/config.mk                |    2 -
 board/emk/top9000/Makefile                        |   54 ++++
 board/emk/top9000/spi.c                           |   61 ++++
 board/emk/top9000/top9000.c                       |  290 +++++++++++++++++++
 board/freescale/mpc8641hpcn/mpc8641hpcn.c         |    3 -
 board/freescale/p2020ds/p2020ds.c                 |    3 -
 boards.cfg                                        |    5 +-
 common/hwconfig.c                                 |   14 +-
 drivers/mmc/gen_atmel_mci.c                       |    1 +
 include/configs/MPC8360EMDS.h                     |    4 +-
 include/configs/MPC8536DS.h                       |    5 +-
 include/configs/MPC8569MDS.h                      |    3 +-
 include/configs/P1_P2_RDB.h                       |    5 +-
 include/configs/at91rm9200ek.h                    |   18 ++-
 include/configs/atngw100.h                        |    2 -
 include/configs/mimc200.h                         |    2 -
 include/configs/r7780mp.h                         |    1 -
 include/configs/top9000.h                         |  314 +++++++++++++++++++++
 include/pci_ids.h                                 |    1 +
 30 files changed, 820 insertions(+), 77 deletions(-)
 delete mode 100644 board/atmel/at91rm9200ek/config.mk
 create mode 100644 board/emk/top9000/Makefile
 create mode 100644 board/emk/top9000/spi.c
 create mode 100644 board/emk/top9000/top9000.c
 create mode 100644 include/configs/top9000.h

Please try and figure out why we now see entries like this one:

Author: andreas.devel at googlemail.com <[email protected]>

As far as I can tell, Andreas' submissions on the mailing list look like this:

From: Andreas Bie?mann <[email protected]>

The patchwork entry looks also clean to me:

http://patchwork.ozlabs.org/patch/73644/

Not pulled.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Vulcans do not approve of violence.
	-- Spock, "Journey to Babel", stardate 3842.4
#3 lore raw

Dear Wolfgang Denk,

Quoted 80 lines
Quoted 39 lines · In message<[email protected]> you wrote:

Dear Wolfgang, Albert,

The following changes since commit 49733aa0b9d29803384ad4bce74985f4bbe7e9aa:
Wolfgang Denk (1):
Merge branch 'master' of /home/wd/git/u-boot/custodians

are available in the git repository at:

   git://git.denx.de/u-boot-atmel.git for2010.12

Andreas Bie?mann (1):
arm920t/at91/reset: board_reset: define weak symbol

Reinhard Meyer (3):
AT91: gen_atmel_mci.c: fix bug when Slot B is used
AT91: fix EMAC gpio init in at91sam9260_devices.c
AT91: add TOP9000 support

andreas.devel at googlemail.com (4):
at91rm9200ek: add configure target for RAM boot
MAKEALL: fix AT91
arm920t/at91/timer: replace bss variables by gd
at91rm9200ek: fix SDRAM initialistation values

  MAINTAINERS                                       |    3 +-
  MAKEALL                                           |   18 +-
  arch/arm/cpu/arm920t/at91/reset.c                 |    8 +-
  arch/arm/cpu/arm920t/at91/timer.c                 |   29 +-
  arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c |    5 +
  arch/arm/include/asm/global_data.h                |    1 +
  board/atmel/at91rm9200ek/config.mk                |    2 -
  board/emk/top9000/Makefile                        |   54 ++++
  board/emk/top9000/spi.c                           |   61 ++++
  board/emk/top9000/top9000.c                       |  290 +++++++++++++++++++
  boards.cfg                                        |    5 +-
  drivers/mmc/gen_atmel_mci.c                       |    1 +
  include/configs/at91rm9200ek.h                    |   18 ++-
  include/configs/top9000.h                         |  314 +++++++++++++++++++++
  14 files changed, 771 insertions(+), 38 deletions(-)
Quoted 5 lines

delete mode 100644 board/atmel/at91rm9200ek/config.mk create mode 100644 board/emk/top9000/Makefile create mode 100644 board/emk/top9000/spi.c create mode 100644 board/emk/top9000/top9000.c create mode 100644 include/configs/top9000.h

Hm... what I see looks quite different:

  MAINTAINERS                                       |    3 +-
  MAKEALL                                           |   18 +-
  arch/arm/cpu/arm920t/at91/reset.c                 |    8 +-
  arch/arm/cpu/arm920t/at91/timer.c                 |   29 +-
  arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c |    5 +
  arch/arm/include/asm/global_data.h                |    1 +
  arch/powerpc/cpu/mpc83xx/start.S                  |    8 +
  arch/powerpc/lib/board.c                          |   11 +
  arch/sh/cpu/sh2/start.S                           |    8 +-
  arch/sh/cpu/sh3/start.S                           |    8 +-
  arch/sh/cpu/sh4/start.S                           |   10 +-
  board/atmel/at91rm9200ek/config.mk                |    2 -
  board/emk/top9000/Makefile                        |   54 ++++
  board/emk/top9000/spi.c                           |   61 ++++
  board/emk/top9000/top9000.c                       |  290 +++++++++++++++++++
  board/freescale/mpc8641hpcn/mpc8641hpcn.c         |    3 -
  board/freescale/p2020ds/p2020ds.c                 |    3 -
  boards.cfg                                        |    5 +-
  common/hwconfig.c                                 |   14 +-
  drivers/mmc/gen_atmel_mci.c                       |    1 +
  include/configs/MPC8360EMDS.h                     |    4 +-
  include/configs/MPC8536DS.h                       |    5 +-
  include/configs/MPC8569MDS.h                      |    3 +-
  include/configs/P1_P2_RDB.h                       |    5 +-
  include/configs/at91rm9200ek.h                    |   18 ++-
  include/configs/atngw100.h                        |    2 -
  include/configs/mimc200.h                         |    2 -
  include/configs/r7780mp.h                         |    1 -
  include/configs/top9000.h                         |  314 +++++++++++++++++++++
  include/pci_ids.h                                 |    1 +
  30 files changed, 820 insertions(+), 77 deletions(-)
Quoted 5 lines

delete mode 100644 board/atmel/at91rm9200ek/config.mk create mode 100644 board/emk/top9000/Makefile create mode 100644 board/emk/top9000/spi.c create mode 100644 board/emk/top9000/top9000.c create mode 100644 include/configs/top9000.h

Have a look at:

http://git.denx.de/?p=u-boot/u-boot-atmel.git;a=shortlog;h=refs/heads/for2010.12

There it does not show the extra files you seem to see.

Please verify that.

Quoted 4 lines

Please try and figure out why we now see entries like this one:

Author: andreas.devel at googlemail.com<[email protected]>

Quoted 8 lines

As far as I can tell, Andreas' submissions on the mailing list look like this:

From: Andreas Bie?mann<[email protected]>

The patchwork entry looks also clean to me:

http://patchwork.ozlabs.org/patch/73644/

Andreas did indeed post from two different e-mail accounts. I used the patchwork "Download mbox" function to get the patches. Apparently the "sharp S" in one of the two e-mail addresses he uses bites the system.

I don't know how to fix that. If we use patchwork it makes no sense to dig out the e-mails with patches from an e-mail archive.

Quoted 1 line

Not pulled.

Understandable, but at a loss to what's going wrong here.

Best regards,
Reinhard Meyer

#4 lore raw
Quoted 85 lines

Dear Wolfgang Denk,

Quoted 78 lines
Quoted 39 lines · In message<[email protected]> you wrote:

Dear Wolfgang, Albert,

The following changes since commit 49733aa0b9d29803384ad4bce74985f4bbe7e9aa:
Wolfgang Denk (1):
Merge branch 'master' of /home/wd/git/u-boot/custodians

are available in the git repository at:

   git://git.denx.de/u-boot-atmel.git for2010.12

Andreas Bie?mann (1):
arm920t/at91/reset: board_reset: define weak symbol

Reinhard Meyer (3):
AT91: gen_atmel_mci.c: fix bug when Slot B is used
AT91: fix EMAC gpio init in at91sam9260_devices.c
AT91: add TOP9000 support

andreas.devel at googlemail.com (4):
at91rm9200ek: add configure target for RAM boot
MAKEALL: fix AT91
arm920t/at91/timer: replace bss variables by gd
at91rm9200ek: fix SDRAM initialistation values

  MAINTAINERS                                       |    3 +-
  MAKEALL                                           |   18 +-
  arch/arm/cpu/arm920t/at91/reset.c                 |    8 +-
  arch/arm/cpu/arm920t/at91/timer.c                 |   29 +-
  arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c |    5 +
  arch/arm/include/asm/global_data.h                |    1 +
  board/atmel/at91rm9200ek/config.mk                |    2 -
  board/emk/top9000/Makefile                        |   54 ++++
  board/emk/top9000/spi.c                           |   61 ++++
  board/emk/top9000/top9000.c                       |  290 +++++++++++++++++++
  boards.cfg                                        |    5 +-
  drivers/mmc/gen_atmel_mci.c                       |    1 +
  include/configs/at91rm9200ek.h                    |   18 ++-
  include/configs/top9000.h                         |  314 +++++++++++++++++++++
  14 files changed, 771 insertions(+), 38 deletions(-)
Quoted 5 lines

delete mode 100644 board/atmel/at91rm9200ek/config.mk create mode 100644 board/emk/top9000/Makefile create mode 100644 board/emk/top9000/spi.c create mode 100644 board/emk/top9000/top9000.c create mode 100644 include/configs/top9000.h

Hm... what I see looks quite different:

  MAINTAINERS                                       |    3 +-
  MAKEALL                                           |   18 +-
  arch/arm/cpu/arm920t/at91/reset.c                 |    8 +-
  arch/arm/cpu/arm920t/at91/timer.c                 |   29 +-
  arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c |    5 +
  arch/arm/include/asm/global_data.h                |    1 +
  arch/powerpc/cpu/mpc83xx/start.S                  |    8 +
  arch/powerpc/lib/board.c                          |   11 +
  arch/sh/cpu/sh2/start.S                           |    8 +-
  arch/sh/cpu/sh3/start.S                           |    8 +-
  arch/sh/cpu/sh4/start.S                           |   10 +-
  board/atmel/at91rm9200ek/config.mk                |    2 -
  board/emk/top9000/Makefile                        |   54 ++++
  board/emk/top9000/spi.c                           |   61 ++++
  board/emk/top9000/top9000.c                       |  290 +++++++++++++++++++
  board/freescale/mpc8641hpcn/mpc8641hpcn.c         |    3 -
  board/freescale/p2020ds/p2020ds.c                 |    3 -
  boards.cfg                                        |    5 +-
  common/hwconfig.c                                 |   14 +-
  drivers/mmc/gen_atmel_mci.c                       |    1 +
  include/configs/MPC8360EMDS.h                     |    4 +-
  include/configs/MPC8536DS.h                       |    5 +-
  include/configs/MPC8569MDS.h                      |    3 +-
  include/configs/P1_P2_RDB.h                       |    5 +-
  include/configs/at91rm9200ek.h                    |   18 ++-
  include/configs/atngw100.h                        |    2 -
  include/configs/mimc200.h                         |    2 -
  include/configs/r7780mp.h                         |    1 -
  include/configs/top9000.h                         |  314 +++++++++++++++++++++
  include/pci_ids.h                                 |    1 +
  30 files changed, 820 insertions(+), 77 deletions(-)
Quoted 5 lines

delete mode 100644 board/atmel/at91rm9200ek/config.mk create mode 100644 board/emk/top9000/Makefile create mode 100644 board/emk/top9000/spi.c create mode 100644 board/emk/top9000/top9000.c create mode 100644 include/configs/top9000.h

Quoted 7 lines

Have a look at:

http://git.denx.de/?p=u-boot/u-boot-atmel.git;a=shortlog;h=refs/heads/for2010.12

There it does not show the extra files you seem to see.

Please verify that.

Hello Wolfgang,

did you find out what happened here? I can clearly see in my local tree and also in the webinterface of the u-boot-atmel.git at your server that there are exactly 8 commits between 49733aa0b9d29803384ad4bce74985f4bbe7e9aa and top of for2010.12. None of them affects the extra files you seem to see locally.

For Andreas' patches, it seems that Signed-off-by: lines with non-ASCII characters in the name do cause trouble and git-am choses to use the e-mail address instead.

I'll hand edit the "?" to "ss" and it is ok.

Best Regards,
Reinhard

#5 lore raw

Dear Reinhard Meyer,

Quoted 5 lines · In message <[email protected]> you wrote:

did you find out what happened here? I can clearly see in my local tree and also in the webinterface of the u-boot-atmel.git at your server that there are exactly 8 commits between 49733aa0b9d29803384ad4bce74985f4bbe7e9aa and top of for2010.12. None of them affects the extra files you seem to see locally.

Well, the point is that your referenc ist not the ARM tree, but you pulled inbetween and thus have stuff in your tree that is not present in u-boot-arm # master yet - so when I pull from your repo, I will get all this stuff as well.

Quoted 2 lines

For Andreas' patches, it seems that Signed-off-by: lines with non-ASCII characters in the name do cause trouble and git-am choses to use the e-mail address instead.

I don't think that this is a problem with git-am.

When I use git-am to apply one of Andreas' patches, I will get a warning but only for the body of the commit message (for the SoB line, to be precise):

...
Applying: at91rm9200ek: add configure target for RAM boot
Warning: commit message does not conform to UTF-8.
You may want to amend it after fixing the message, or set the config variable i18n.commitencoding to the encoding your project uses.

But except from that it works fine, and it shows

Author: Andreas Bie?mann <[email protected]> 2010-11-30 20:45:03
Committer: Wolfgang Denk <[email protected]> 2010-12-07 15:28:06

I get identical results when downloading the mbox file from patchwork or when using the file in my local mailing list archive.

Thi sis not a git-am issue, but something on your end.

Quoted 1 line

I'll hand edit the "?" to "ss" and it is ok.

I see no reason for doing this.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A well-written program is its own heaven; a poorly-written program is
its own hell.             -- Geoffrey James, "The Tao of Programming"
#6 lore raw

Dear Wolfgang Denk,

Quoted 4 lines

Well, the point is that your referenc ist not the ARM tree, but you pulled inbetween and thus have stuff in your tree that is not present in u-boot-arm # master yet - so when I pull from your repo, I will get all this stuff as well.

Umm, thats true. I pulled from u-boot.git/master to my master. I will repull/rebase that to u-boot-arm. Did not think about that. Previously I was just lucky that u-boot-arm was identical to u-boot :) Solves one mystery.

Quoted 16 lines
Quoted 3 lines

For Andreas' patches, it seems that Signed-off-by: lines with non-ASCII characters in the name do cause trouble and git-am choses to use the e-mail address instead.

I don't think that this is a problem with git-am.

When I use git-am to apply one of Andreas' patches, I will get a warning but only for the body of the commit message (for the SoB line, to be precise):

...
Applying: at91rm9200ek: add configure target for RAM boot
Warning: commit message does not conform to UTF-8.
You may want to amend it after fixing the message, or set the config variable i18n.commitencoding to the encoding your project uses.

Quoted 8 lines

But except from that it works fine, and it shows

Author: Andreas Bie?mann <[email protected]> 2010-11-30 20:45:03
Committer: Wolfgang Denk <[email protected]> 2010-12-07 15:28:06

I get identical results when downloading the mbox file from patchwork or when using the file in my local mailing list archive.

What I get when I do that (after save to disk the mbox files):

reinhard at sieb:~/embedded/u-boot-atmel$ git-am ../u-boot-patches/*.patch
Applying at91rm9200ek: fix SDRAM initialistation values
Applying at91rm9200ek: add configure target for RAM boot
Applying MAKEALL: fix AT91
Applying arm920t/at91/reset: board_reset: define weak symbol
Applying arm920t/at91/timer: replace bss variables by gd
reinhard at sieb:~/embedded/u-boot-atmel$ gitk
reinhard at sieb:~/embedded/u-boot-atmel$ git-request-pull master git://git.denx.de/u-boot-atmel.git to2010.12 >pull.txt reinhard at sieb:~/embedded/u-boot-atmel$ cat pull.txt
The following changes since commit 52eb2c79110151b9017a0829c4d44ee7b8e2ca04:
Wolfgang Denk (1):
Merge branch 'master' of git://git.denx.de/u-boot-samsung

are available in the git repository at:

git://git.denx.de/u-boot-atmel.git for2010.12

Andreas Bie?mann (1):
arm920t/at91/reset: board_reset: define weak symbol

Reinhard Meyer (3):
AT91: gen_atmel_mci.c: fix bug when Slot B is used
AT91: fix EMAC gpio init in at91sam9260_devices.c
AT91: add TOP9000 support

andreas.devel at googlemail.com (4):
at91rm9200ek: fix SDRAM initialistation values
at91rm9200ek: add configure target for RAM boot
MAKEALL: fix AT91
arm920t/at91/timer: replace bss variables by gd

 MAINTAINERS                                       |    3 +-
 MAKEALL                                           |   18 +-
 arch/arm/cpu/arm920t/at91/reset.c                 |    8 +-
 arch/arm/cpu/arm920t/at91/timer.c                 |   29 +-
 arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c |    5 +
 arch/arm/include/asm/global_data.h                |    1 +
 board/atmel/at91rm9200ek/config.mk                |    2 -
 board/emk/top9000/Makefile                        |   54 ++++
 board/emk/top9000/spi.c                           |   61 ++++
 board/emk/top9000/top9000.c                       |  290 +++++++++++++++++++
 boards.cfg                                        |    5 +-
 drivers/mmc/gen_atmel_mci.c                       |    1 +
 include/configs/at91rm9200ek.h                    |   18 ++-
 include/configs/top9000.h                         |  314 +++++++++++++++++++++
 14 files changed, 771 insertions(+), 38 deletions(-)
 delete mode 100644 board/atmel/at91rm9200ek/config.mk
 create mode 100644 board/emk/top9000/Makefile
 create mode 100644 board/emk/top9000/spi.c
 create mode 100644 board/emk/top9000/top9000.c
 create mode 100644 include/configs/top9000.h

reinhard at sieb:~/embedded/u-boot-atmel$

The ones he sent via the googlemail.com account still look funny for the Author part. But does that really matter. The commit itself, including the Signed-off-by line os fine.

Best Regards,
Reinhard

#7 lore raw

[U-Boot] V2: Please pull u-boot-atmel/for2010.12

Dear Wolfgang,

compiled TOT git. Now it handles the "?" in e-Mails correctly....

The following changes since commit 52eb2c79110151b9017a0829c4d44ee7b8e2ca04:
Wolfgang Denk (1):
Merge branch 'master' of git://git.denx.de/u-boot-samsung

are available in the git repository at:

git://git.denx.de/u-boot-atmel.git for2010.12

Andreas Bie?mann (5):
at91rm9200ek: fix SDRAM initialistation values
at91rm9200ek: add configure target for RAM boot
MAKEALL: fix AT91
arm920t/at91/reset: board_reset: define weak symbol arm920t/at91/timer: replace bss variables by gd

Reinhard Meyer (3):
AT91: gen_atmel_mci.c: fix bug when Slot B is used
AT91: fix EMAC gpio init in at91sam9260_devices.c
AT91: add TOP9000 support

 MAINTAINERS                                       |    3 +-
 MAKEALL                                           |   18 +-
 arch/arm/cpu/arm920t/at91/reset.c                 |    8 +-
 arch/arm/cpu/arm920t/at91/timer.c                 |   29 +-
 arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c |    5 +
 arch/arm/include/asm/global_data.h                |    1 +
 board/atmel/at91rm9200ek/config.mk                |    2 -
 board/emk/top9000/Makefile                        |   54 ++++
 board/emk/top9000/spi.c                           |   61 ++++
 board/emk/top9000/top9000.c                       |  290 +++++++++++++++++++
 boards.cfg                                        |    5 +-
 drivers/mmc/gen_atmel_mci.c                       |    1 +
 include/configs/at91rm9200ek.h                    |   18 ++-
 include/configs/top9000.h                         |  314 +++++++++++++++++++++
 14 files changed, 771 insertions(+), 38 deletions(-)
 delete mode 100644 board/atmel/at91rm9200ek/config.mk
 create mode 100644 board/emk/top9000/Makefile
 create mode 100644 board/emk/top9000/spi.c
 create mode 100644 board/emk/top9000/top9000.c
 create mode 100644 include/configs/top9000.h

Best Regards,
Reinhard

#8 lore raw

[U-Boot] V2: Please pull u-boot-atmel/for2010.12

Dear Reinhard Meyer,

Quoted 36 lines · In message <[email protected]> you wrote:

Dear Wolfgang,

compiled TOT git. Now it handles the "?" in e-Mails correctly....

The following changes since commit 52eb2c79110151b9017a0829c4d44ee7b8e2ca04:
Wolfgang Denk (1):
Merge branch 'master' of git://git.denx.de/u-boot-samsung

are available in the git repository at:

git://git.denx.de/u-boot-atmel.git for2010.12

Andreas Bie?mann (5):
at91rm9200ek: fix SDRAM initialistation values
at91rm9200ek: add configure target for RAM boot
MAKEALL: fix AT91
arm920t/at91/reset: board_reset: define weak symbol arm920t/at91/timer: replace bss variables by gd

Reinhard Meyer (3):
AT91: gen_atmel_mci.c: fix bug when Slot B is used
AT91: fix EMAC gpio init in at91sam9260_devices.c
AT91: add TOP9000 support

 MAINTAINERS                                       |    3 +-
 MAKEALL                                           |   18 +-
 arch/arm/cpu/arm920t/at91/reset.c                 |    8 +-
 arch/arm/cpu/arm920t/at91/timer.c                 |   29 +-
 arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c |    5 +
 arch/arm/include/asm/global_data.h                |    1 +
 board/atmel/at91rm9200ek/config.mk                |    2 -
 board/emk/top9000/Makefile                        |   54 ++++
 board/emk/top9000/spi.c                           |   61 ++++
 board/emk/top9000/top9000.c                       |  290 +++++++++++++++++++
 boards.cfg                                        |    5 +-
 drivers/mmc/gen_atmel_mci.c                       |    1 +
Quoted 8 lines
 include/configs/at91rm9200ek.h                    |   18 ++-
 include/configs/top9000.h                         |  314 +++++++++++++++++++++
 14 files changed, 771 insertions(+), 38 deletions(-)
 delete mode 100644 board/atmel/at91rm9200ek/config.mk
 create mode 100644 board/emk/top9000/Makefile
 create mode 100644 board/emk/top9000/spi.c
 create mode 100644 board/emk/top9000/top9000.c
 create mode 100644 include/configs/top9000.h

Thanks, applied.

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
When properly administered, vacations do not  diminish  productivity:
for every week you're away and get nothing done, there's another when
your boss is away and you get twice as much done.  -- Daniel B. Luten