Please pull u-boot-atmel/for2010.12
Dear Wolfgang, Albert,
The following changes since commit 49733aa0b9d29803384ad4bce74985f4bbe7e9aa:
Wolfgang Denk (1):
Merge branch 'master' of /home/wd/git/u-boot/custodians
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git for2010.12
Andreas Bie?mann (1):
arm920t/at91/reset: board_reset: define weak symbol
Reinhard Meyer (3):
AT91: gen_atmel_mci.c: fix bug when Slot B is used
AT91: fix EMAC gpio init in at91sam9260_devices.c
AT91: add TOP9000 support
andreas.devel at googlemail.com (4):
at91rm9200ek: add configure target for RAM boot
MAKEALL: fix AT91
arm920t/at91/timer: replace bss variables by gd
at91rm9200ek: fix SDRAM initialistation values
MAINTAINERS | 3 +- MAKEALL | 18 +- arch/arm/cpu/arm920t/at91/reset.c | 8 +- arch/arm/cpu/arm920t/at91/timer.c | 29 +- arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 5 + arch/arm/include/asm/global_data.h | 1 + board/atmel/at91rm9200ek/config.mk | 2 - board/emk/top9000/Makefile | 54 ++++ board/emk/top9000/spi.c | 61 ++++ board/emk/top9000/top9000.c | 290 +++++++++++++++++++ boards.cfg | 5 +- drivers/mmc/gen_atmel_mci.c | 1 + include/configs/at91rm9200ek.h | 18 ++- include/configs/top9000.h | 314 +++++++++++++++++++++ 14 files changed, 771 insertions(+), 38 deletions(-) delete mode 100644 board/atmel/at91rm9200ek/config.mk create mode 100644 board/emk/top9000/Makefile create mode 100644 board/emk/top9000/spi.c create mode 100644 board/emk/top9000/top9000.c create mode 100644 include/configs/top9000.h
I think this time, it's still Wolfgang doing the pull to ARM, right?
Best Regards,
Reinhard
Hi Reinhard,
Le 06/12/2010 10:43, Reinhard Meyer a ?crit :
Quoted 1 line
I think this time, it's still Wolfgang doing the pull to ARM, right?
Correct.
Quoted 2 lines
Best Regards,
Reinhard
Amicalement,
Signature · 1 line
Albert.
Dear Reinhard Meyer,
Quoted 36 lines · In message <[email protected]> you wrote:
Dear Wolfgang, Albert,
The following changes since commit
49733aa0b9d29803384ad4bce74985f4bbe7e9aa:
Wolfgang Denk (1):
Merge branch 'master' of/home/wd/git/u-boot/custodiansare available in the git repository at:
git://git.denx.de/u-boot-atmel.gitfor2010.12Andreas Bie?mann (1):
arm920t/at91/reset:board_reset: define weak symbolReinhard Meyer (3):
AT91:gen_atmel_mci.c: fix bug when Slot B is used
AT91: fix EMAC gpio init inat91sam9260_devices.c
AT91: add TOP9000 supportandreas.devel at googlemail.com (4):
at91rm9200ek: add configure target for RAM boot
MAKEALL: fix AT91
arm920t/at91/timer: replace bss variables by gd
at91rm9200ek: fix SDRAM initialistation valuesMAINTAINERS | 3 +- MAKEALL | 18 +- arch/arm/cpu/arm920t/at91/reset.c | 8 +- arch/arm/cpu/arm920t/at91/timer.c | 29 +- arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 5 + arch/arm/include/asm/global_data.h | 1 + board/atmel/at91rm9200ek/config.mk | 2 - board/emk/top9000/Makefile | 54 ++++ board/emk/top9000/spi.c | 61 ++++ board/emk/top9000/top9000.c | 290 +++++++++++++++++++ boards.cfg | 5 +- drivers/mmc/gen_atmel_mci.c | 1 +
Quoted 8 lines
include/configs/at91rm9200ek.h | 18 ++- include/configs/top9000.h | 314 +++++++++++++++++++++ 14 files changed, 771 insertions(+), 38 deletions(-) delete mode 100644 board/atmel/at91rm9200ek/config.mk create mode 100644 board/emk/top9000/Makefile create mode 100644 board/emk/top9000/spi.c create mode 100644 board/emk/top9000/top9000.c create mode 100644 include/configs/top9000.h
Hm... what I see looks quite different:
MAINTAINERS | 3 +- MAKEALL | 18 +- arch/arm/cpu/arm920t/at91/reset.c | 8 +- arch/arm/cpu/arm920t/at91/timer.c | 29 +- arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 5 + arch/arm/include/asm/global_data.h | 1 + arch/powerpc/cpu/mpc83xx/start.S | 8 + arch/powerpc/lib/board.c | 11 + arch/sh/cpu/sh2/start.S | 8 +- arch/sh/cpu/sh3/start.S | 8 +- arch/sh/cpu/sh4/start.S | 10 +- board/atmel/at91rm9200ek/config.mk | 2 - board/emk/top9000/Makefile | 54 ++++ board/emk/top9000/spi.c | 61 ++++ board/emk/top9000/top9000.c | 290 +++++++++++++++++++ board/freescale/mpc8641hpcn/mpc8641hpcn.c | 3 - board/freescale/p2020ds/p2020ds.c | 3 - boards.cfg | 5 +- common/hwconfig.c | 14 +- drivers/mmc/gen_atmel_mci.c | 1 + include/configs/MPC8360EMDS.h | 4 +- include/configs/MPC8536DS.h | 5 +- include/configs/MPC8569MDS.h | 3 +- include/configs/P1_P2_RDB.h | 5 +- include/configs/at91rm9200ek.h | 18 ++- include/configs/atngw100.h | 2 - include/configs/mimc200.h | 2 - include/configs/r7780mp.h | 1 - include/configs/top9000.h | 314 +++++++++++++++++++++ include/pci_ids.h | 1 + 30 files changed, 820 insertions(+), 77 deletions(-) delete mode 100644 board/atmel/at91rm9200ek/config.mk create mode 100644 board/emk/top9000/Makefile create mode 100644 board/emk/top9000/spi.c create mode 100644 board/emk/top9000/top9000.c create mode 100644 include/configs/top9000.h
Please try and figure out why we now see entries like this one:
Author: andreas.devel at googlemail.com <[email protected]>
As far as I can tell, Andreas' submissions on the mailing list look like this:
From: Andreas Bie?mann <[email protected]>
The patchwork entry looks also clean to me:
http://patchwork.ozlabs.org/patch/73644/
Not pulled.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Vulcans do not approve of violence. -- Spock, "Journey to Babel", stardate 3842.4
Dear Wolfgang Denk,
Quoted 80 lines
Quoted 39 lines · In message<[email protected]> you wrote:
Dear Wolfgang, Albert,
The following changes since commit
49733aa0b9d29803384ad4bce74985f4bbe7e9aa:
Wolfgang Denk (1):
Merge branch 'master' of/home/wd/git/u-boot/custodiansare available in the git repository at:
git://git.denx.de/u-boot-atmel.git for2010.12Andreas Bie?mann (1):
arm920t/at91/reset:board_reset: define weak symbolReinhard Meyer (3):
AT91:gen_atmel_mci.c: fix bug when Slot B is used
AT91: fix EMAC gpio init inat91sam9260_devices.c
AT91: add TOP9000 supportandreas.devel at googlemail.com (4):
at91rm9200ek: add configure target for RAM boot
MAKEALL: fix AT91
arm920t/at91/timer: replace bss variables by gd
at91rm9200ek: fix SDRAM initialistation valuesMAINTAINERS | 3 +- MAKEALL | 18 +- arch/arm/cpu/arm920t/at91/reset.c | 8 +- arch/arm/cpu/arm920t/at91/timer.c | 29 +- arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 5 + arch/arm/include/asm/global_data.h | 1 + board/atmel/at91rm9200ek/config.mk | 2 - board/emk/top9000/Makefile | 54 ++++ board/emk/top9000/spi.c | 61 ++++ board/emk/top9000/top9000.c | 290 +++++++++++++++++++ boards.cfg | 5 +- drivers/mmc/gen_atmel_mci.c | 1 + include/configs/at91rm9200ek.h | 18 ++- include/configs/top9000.h | 314 +++++++++++++++++++++ 14 files changed, 771 insertions(+), 38 deletions(-)Quoted 5 lines
delete mode 100644
board/atmel/at91rm9200ek/config.mkcreate mode 100644 board/emk/top9000/Makefile create mode 100644board/emk/top9000/spi.ccreate mode 100644board/emk/top9000/top9000.ccreate mode 100644include/configs/top9000.hHm... what I see looks quite different:
MAINTAINERS | 3 +- MAKEALL | 18 +- arch/arm/cpu/arm920t/at91/reset.c | 8 +- arch/arm/cpu/arm920t/at91/timer.c | 29 +- arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 5 + arch/arm/include/asm/global_data.h | 1 + arch/powerpc/cpu/mpc83xx/start.S | 8 + arch/powerpc/lib/board.c | 11 + arch/sh/cpu/sh2/start.S | 8 +- arch/sh/cpu/sh3/start.S | 8 +- arch/sh/cpu/sh4/start.S | 10 +- board/atmel/at91rm9200ek/config.mk | 2 - board/emk/top9000/Makefile | 54 ++++ board/emk/top9000/spi.c | 61 ++++ board/emk/top9000/top9000.c | 290 +++++++++++++++++++ board/freescale/mpc8641hpcn/mpc8641hpcn.c | 3 - board/freescale/p2020ds/p2020ds.c | 3 - boards.cfg | 5 +- common/hwconfig.c | 14 +- drivers/mmc/gen_atmel_mci.c | 1 + include/configs/MPC8360EMDS.h | 4 +- include/configs/MPC8536DS.h | 5 +- include/configs/MPC8569MDS.h | 3 +- include/configs/P1_P2_RDB.h | 5 +- include/configs/at91rm9200ek.h | 18 ++- include/configs/atngw100.h | 2 - include/configs/mimc200.h | 2 - include/configs/r7780mp.h | 1 - include/configs/top9000.h | 314 +++++++++++++++++++++ include/pci_ids.h | 1 + 30 files changed, 820 insertions(+), 77 deletions(-)
Quoted 5 lines
delete mode 100644
board/atmel/at91rm9200ek/config.mkcreate mode 100644 board/emk/top9000/Makefile create mode 100644board/emk/top9000/spi.ccreate mode 100644board/emk/top9000/top9000.ccreate mode 100644include/configs/top9000.h
Have a look at:
http://git.denx.de/?p=u-boot/u-boot-atmel.git;a=shortlog;h=refs/heads/for2010.12
There it does not show the extra files you seem to see.
Please verify that.
Quoted 4 lines
Please try and figure out why we now see entries like this one:
Author: andreas.devel at googlemail.com<[email protected]>
Quoted 8 lines
As far as I can tell, Andreas' submissions on the mailing list look like this:
From: Andreas Bie?mann<[email protected]>
The patchwork entry looks also clean to me:
Andreas did indeed post from two different e-mail accounts. I used the patchwork "Download mbox" function to get the patches. Apparently the "sharp S" in one of the two e-mail addresses he uses bites the system.
I don't know how to fix that. If we use patchwork it makes no sense to dig out the e-mails with patches from an e-mail archive.
Quoted 1 line
Not pulled.
Understandable, but at a loss to what's going wrong here.
Best regards,
Reinhard Meyer
Quoted 85 lines
Dear Wolfgang Denk,
Quoted 78 lines
Quoted 39 lines · In message<[email protected]> you wrote:
Dear Wolfgang, Albert,
The following changes since commit
49733aa0b9d29803384ad4bce74985f4bbe7e9aa:
Wolfgang Denk (1):
Merge branch 'master' of/home/wd/git/u-boot/custodiansare available in the git repository at:
git://git.denx.de/u-boot-atmel.git for2010.12Andreas Bie?mann (1):
arm920t/at91/reset:board_reset: define weak symbolReinhard Meyer (3):
AT91:gen_atmel_mci.c: fix bug when Slot B is used
AT91: fix EMAC gpio init inat91sam9260_devices.c
AT91: add TOP9000 supportandreas.devel at googlemail.com (4):
at91rm9200ek: add configure target for RAM boot
MAKEALL: fix AT91
arm920t/at91/timer: replace bss variables by gd
at91rm9200ek: fix SDRAM initialistation valuesMAINTAINERS | 3 +- MAKEALL | 18 +- arch/arm/cpu/arm920t/at91/reset.c | 8 +- arch/arm/cpu/arm920t/at91/timer.c | 29 +- arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 5 + arch/arm/include/asm/global_data.h | 1 + board/atmel/at91rm9200ek/config.mk | 2 - board/emk/top9000/Makefile | 54 ++++ board/emk/top9000/spi.c | 61 ++++ board/emk/top9000/top9000.c | 290 +++++++++++++++++++ boards.cfg | 5 +- drivers/mmc/gen_atmel_mci.c | 1 + include/configs/at91rm9200ek.h | 18 ++- include/configs/top9000.h | 314 +++++++++++++++++++++ 14 files changed, 771 insertions(+), 38 deletions(-)Quoted 5 lines
delete mode 100644
board/atmel/at91rm9200ek/config.mkcreate mode 100644 board/emk/top9000/Makefile create mode 100644board/emk/top9000/spi.ccreate mode 100644board/emk/top9000/top9000.ccreate mode 100644include/configs/top9000.hHm... what I see looks quite different:
MAINTAINERS | 3 +- MAKEALL | 18 +- arch/arm/cpu/arm920t/at91/reset.c | 8 +- arch/arm/cpu/arm920t/at91/timer.c | 29 +- arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 5 + arch/arm/include/asm/global_data.h | 1 + arch/powerpc/cpu/mpc83xx/start.S | 8 + arch/powerpc/lib/board.c | 11 + arch/sh/cpu/sh2/start.S | 8 +- arch/sh/cpu/sh3/start.S | 8 +- arch/sh/cpu/sh4/start.S | 10 +- board/atmel/at91rm9200ek/config.mk | 2 - board/emk/top9000/Makefile | 54 ++++ board/emk/top9000/spi.c | 61 ++++ board/emk/top9000/top9000.c | 290 +++++++++++++++++++ board/freescale/mpc8641hpcn/mpc8641hpcn.c | 3 - board/freescale/p2020ds/p2020ds.c | 3 - boards.cfg | 5 +- common/hwconfig.c | 14 +- drivers/mmc/gen_atmel_mci.c | 1 + include/configs/MPC8360EMDS.h | 4 +- include/configs/MPC8536DS.h | 5 +- include/configs/MPC8569MDS.h | 3 +- include/configs/P1_P2_RDB.h | 5 +- include/configs/at91rm9200ek.h | 18 ++- include/configs/atngw100.h | 2 - include/configs/mimc200.h | 2 - include/configs/r7780mp.h | 1 - include/configs/top9000.h | 314 +++++++++++++++++++++ include/pci_ids.h | 1 + 30 files changed, 820 insertions(+), 77 deletions(-)Quoted 5 lines
delete mode 100644
board/atmel/at91rm9200ek/config.mkcreate mode 100644 board/emk/top9000/Makefile create mode 100644board/emk/top9000/spi.ccreate mode 100644board/emk/top9000/top9000.ccreate mode 100644include/configs/top9000.h
Quoted 7 lines
Have a look at:
http://git.denx.de/?p=u-boot/u-boot-atmel.git;a=shortlog;h=refs/heads/for2010.12
There it does not show the extra files you seem to see.
Please verify that.
Hello Wolfgang,
did you find out what happened here? I can clearly see in my local tree and also in the webinterface of the u-boot-atmel.git at your server that there are exactly 8 commits between 49733aa0b9d29803384ad4bce74985f4bbe7e9aa and top of for2010.12. None of them affects the extra files you seem to see locally.
For Andreas' patches, it seems that Signed-off-by: lines with non-ASCII characters in the name do cause trouble and git-am choses to use the e-mail address instead.
I'll hand edit the "?" to "ss" and it is ok.
Best Regards,
Reinhard
Dear Reinhard Meyer,
Quoted 5 lines · In message <[email protected]> you wrote:
did you find out what happened here? I can clearly see in my local tree and also in the webinterface of the u-boot-atmel.git at your server that there are exactly 8 commits between
49733aa0b9d29803384ad4bce74985f4bbe7e9aaand top of for2010.12. None of them affects the extra files you seem to see locally.
Well, the point is that your referenc ist not the ARM tree, but you pulled inbetween and thus have stuff in your tree that is not present in u-boot-arm # master yet - so when I pull from your repo, I will get all this stuff as well.
Quoted 2 lines
For Andreas' patches, it seems that Signed-off-by: lines with non-ASCII characters in the name do cause trouble and git-am choses to use the e-mail address instead.
I don't think that this is a problem with git-am.
When I use git-am to apply one of Andreas' patches, I will get a warning but only for the body of the commit message (for the SoB line, to be precise):
...
Applying: at91rm9200ek: add configure target for RAM boot
Warning: commit message does not conform to UTF-8.
You may want to amend it after fixing the message, or set the config variable i18n.commitencoding to the encoding your project uses.
But except from that it works fine, and it shows
Author: Andreas Bie?mann <[email protected]> 2010-11-30 20:45:03
Committer: Wolfgang Denk <[email protected]> 2010-12-07 15:28:06
I get identical results when downloading the mbox file from patchwork or when using the file in my local mailing list archive.
Thi sis not a git-am issue, but something on your end.
Quoted 1 line
I'll hand edit the "?" to "ss" and it is ok.
I see no reason for doing this.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de A well-written program is its own heaven; a poorly-written program is its own hell. -- Geoffrey James, "The Tao of Programming"
Dear Wolfgang Denk,
Quoted 4 lines
Well, the point is that your referenc ist not the ARM tree, but you pulled inbetween and thus have stuff in your tree that is not present in u-boot-arm # master yet - so when I pull from your repo, I will get all this stuff as well.
Umm, thats true. I pulled from u-boot.git/master to my master. I will repull/rebase that to u-boot-arm. Did not think about that. Previously I was just lucky that u-boot-arm was identical to u-boot :) Solves one mystery.
Quoted 16 lines
Quoted 3 lines
For Andreas' patches, it seems that Signed-off-by: lines with non-ASCII characters in the name do cause trouble and git-am choses to use the e-mail address instead.
I don't think that this is a problem with git-am.
When I use git-am to apply one of Andreas' patches, I will get a warning but only for the body of the commit message (for the SoB line, to be precise):
...
Applying: at91rm9200ek: add configure target for RAM boot
Warning: commit message does not conform to UTF-8.
You may want to amend it after fixing the message, or set the config variable i18n.commitencoding to the encoding your project uses.
Quoted 8 lines
But except from that it works fine, and it shows
Author: Andreas Bie?mann <[email protected]> 2010-11-30 20:45:03
Committer: Wolfgang Denk <[email protected]> 2010-12-07 15:28:06I get identical results when downloading the mbox file from patchwork or when using the file in my local mailing list archive.
What I get when I do that (after save to disk the mbox files):
reinhard at sieb:~/embedded/u-boot-atmel$ git-am ../u-boot-patches/*.patch
Applying at91rm9200ek: fix SDRAM initialistation values
Applying at91rm9200ek: add configure target for RAM boot
Applying MAKEALL: fix AT91
Applying arm920t/at91/reset: board_reset: define weak symbol
Applying arm920t/at91/timer: replace bss variables by gd
reinhard at sieb:~/embedded/u-boot-atmel$ gitk
reinhard at sieb:~/embedded/u-boot-atmel$ git-request-pull master git://git.denx.de/u-boot-atmel.git to2010.12 >pull.txt reinhard at sieb:~/embedded/u-boot-atmel$ cat pull.txt
The following changes since commit 52eb2c79110151b9017a0829c4d44ee7b8e2ca04:
Wolfgang Denk (1):
Merge branch 'master' of git://git.denx.de/u-boot-samsung
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git for2010.12
Andreas Bie?mann (1):
arm920t/at91/reset: board_reset: define weak symbol
Reinhard Meyer (3):
AT91: gen_atmel_mci.c: fix bug when Slot B is used
AT91: fix EMAC gpio init in at91sam9260_devices.c
AT91: add TOP9000 support
andreas.devel at googlemail.com (4):
at91rm9200ek: fix SDRAM initialistation values
at91rm9200ek: add configure target for RAM boot
MAKEALL: fix AT91
arm920t/at91/timer: replace bss variables by gd
MAINTAINERS | 3 +- MAKEALL | 18 +- arch/arm/cpu/arm920t/at91/reset.c | 8 +- arch/arm/cpu/arm920t/at91/timer.c | 29 +- arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 5 + arch/arm/include/asm/global_data.h | 1 + board/atmel/at91rm9200ek/config.mk | 2 - board/emk/top9000/Makefile | 54 ++++ board/emk/top9000/spi.c | 61 ++++ board/emk/top9000/top9000.c | 290 +++++++++++++++++++ boards.cfg | 5 +- drivers/mmc/gen_atmel_mci.c | 1 + include/configs/at91rm9200ek.h | 18 ++- include/configs/top9000.h | 314 +++++++++++++++++++++ 14 files changed, 771 insertions(+), 38 deletions(-) delete mode 100644 board/atmel/at91rm9200ek/config.mk create mode 100644 board/emk/top9000/Makefile create mode 100644 board/emk/top9000/spi.c create mode 100644 board/emk/top9000/top9000.c create mode 100644 include/configs/top9000.h
reinhard at sieb:~/embedded/u-boot-atmel$
The ones he sent via the googlemail.com account still look funny for the Author part. But does that really matter. The commit itself, including the Signed-off-by line os fine.
Best Regards,
Reinhard
[U-Boot] V2: Please pull u-boot-atmel/for2010.12
Dear Wolfgang,
compiled TOT git. Now it handles the "?" in e-Mails correctly....
The following changes since commit 52eb2c79110151b9017a0829c4d44ee7b8e2ca04:
Wolfgang Denk (1):
Merge branch 'master' of git://git.denx.de/u-boot-samsung
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git for2010.12
Andreas Bie?mann (5):
at91rm9200ek: fix SDRAM initialistation values
at91rm9200ek: add configure target for RAM boot
MAKEALL: fix AT91
arm920t/at91/reset: board_reset: define weak symbol arm920t/at91/timer: replace bss variables by gd
Reinhard Meyer (3):
AT91: gen_atmel_mci.c: fix bug when Slot B is used
AT91: fix EMAC gpio init in at91sam9260_devices.c
AT91: add TOP9000 support
MAINTAINERS | 3 +- MAKEALL | 18 +- arch/arm/cpu/arm920t/at91/reset.c | 8 +- arch/arm/cpu/arm920t/at91/timer.c | 29 +- arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 5 + arch/arm/include/asm/global_data.h | 1 + board/atmel/at91rm9200ek/config.mk | 2 - board/emk/top9000/Makefile | 54 ++++ board/emk/top9000/spi.c | 61 ++++ board/emk/top9000/top9000.c | 290 +++++++++++++++++++ boards.cfg | 5 +- drivers/mmc/gen_atmel_mci.c | 1 + include/configs/at91rm9200ek.h | 18 ++- include/configs/top9000.h | 314 +++++++++++++++++++++ 14 files changed, 771 insertions(+), 38 deletions(-) delete mode 100644 board/atmel/at91rm9200ek/config.mk create mode 100644 board/emk/top9000/Makefile create mode 100644 board/emk/top9000/spi.c create mode 100644 board/emk/top9000/top9000.c create mode 100644 include/configs/top9000.h
Best Regards,
Reinhard
Wolfgang Denk
Applied[U-Boot] V2: Please pull u-boot-atmel/for2010.12
Dear Reinhard Meyer,
Quoted 36 lines · In message <[email protected]> you wrote:
Dear Wolfgang,
compiled TOT git. Now it handles the "?" in e-Mails correctly....
The following changes since commit
52eb2c79110151b9017a0829c4d44ee7b8e2ca04:
Wolfgang Denk (1):
Merge branch 'master' ofgit://git.denx.de/u-boot-samsungare available in the git repository at:
git://git.denx.de/u-boot-atmel.gitfor2010.12Andreas Bie?mann (5):
at91rm9200ek: fix SDRAM initialistation values
at91rm9200ek: add configure target for RAM boot
MAKEALL: fix AT91
arm920t/at91/reset:board_reset: define weak symbol arm920t/at91/timer: replace bss variables by gdReinhard Meyer (3):
AT91:gen_atmel_mci.c: fix bug when Slot B is used
AT91: fix EMAC gpio init inat91sam9260_devices.c
AT91: add TOP9000 supportMAINTAINERS | 3 +- MAKEALL | 18 +- arch/arm/cpu/arm920t/at91/reset.c | 8 +- arch/arm/cpu/arm920t/at91/timer.c | 29 +- arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 5 + arch/arm/include/asm/global_data.h | 1 + board/atmel/at91rm9200ek/config.mk | 2 - board/emk/top9000/Makefile | 54 ++++ board/emk/top9000/spi.c | 61 ++++ board/emk/top9000/top9000.c | 290 +++++++++++++++++++ boards.cfg | 5 +- drivers/mmc/gen_atmel_mci.c | 1 +
Quoted 8 lines
include/configs/at91rm9200ek.h | 18 ++- include/configs/top9000.h | 314 +++++++++++++++++++++ 14 files changed, 771 insertions(+), 38 deletions(-) delete mode 100644 board/atmel/at91rm9200ek/config.mk create mode 100644 board/emk/top9000/Makefile create mode 100644 board/emk/top9000/spi.c create mode 100644 board/emk/top9000/top9000.c create mode 100644 include/configs/top9000.h
Thanks, applied.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de When properly administered, vacations do not diminish productivity: for every week you're away and get nothing done, there's another when your boss is away and you get twice as much done. -- Daniel B. Luten