Skip to contentSkip to conversation

cfi_flash: Fix problems with status/id read mode

PATCH New Stefan Roese 1 participant 2 messages Oct 25, 2010 – Dec 17, 2010 Memory technology devices (MTD)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 cfi_flash: Fix problems with status/id read mode

This patch adds some calls to set the flash chip in the read-status- register- or read-id-mode before the corresponding register is read back. This problem was detected while porting the common CFI driver to support the Xilinx DS617 flash chips.

---
 drivers/mtd/cfi_flash.c |   12 ++++++++++++
 1 files changed, 12 insertions(+), 0 deletions(-)
drivers/mtd/cfi_flash.c +12 -0
index c92c7a7..e2317bd 100644
@@ -1426,6 +1426,11 @@ int flash_real_protect (flash_info_t * info, long sector, int prot)
 #endif
 	};
 
+	/*
+	 * Flash needs to be in status register read mode for
+	 * flash_full_status_check() to work correctly
+	 */
+	flash_write_cmd(info, sector, 0, FLASH_CMD_READ_STATUS);
 	if ((retcode =
 	     flash_full_status_check (info, sector, info->erase_blk_tout,
 				      prot ? "protect" : "unprotect")) == 0) {
@@ -1973,6 +1978,13 @@ ulong flash_get_size (phys_addr_t base, int banknum, unsigned long max_size)
 				case CFI_CMDSET_INTEL_PROG_REGIONS:
 				case CFI_CMDSET_INTEL_EXTENDED:
 				case CFI_CMDSET_INTEL_STANDARD:
+					/*
+					 * Set flash to read-id mode. Otherwise
+					 * reading protected status is not
+					 * guaranteed.
+					 */
+					flash_write_cmd(info, sect_cnt, 0,
+							FLASH_CMD_READ_ID);
 					info->protect[sect_cnt] =
 						flash_isset (info, sect_cnt,
 							     FLASH_OFFSET_PROTECT,
Signature · 1 line
1.7.3.2
#1 lore raw

PATCH 1/1 cfi_flash: Fix problems with status/id read mode

Quoted 4 lines · On Monday 25 October 2010 18:31:29 Stefan Roese wrote:

This patch adds some calls to set the flash chip in the read-status- register- or read-id-mode before the corresponding register is read back. This problem was detected while porting the common CFI driver to support the Xilinx DS617 flash chips.

Applied to u-boot-cfi-flash/next. Thanks.

Cheers,
Stefan

--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de