mmc: not clock gate host when host is in runtime suspended state
PATCH 3/3 mmc: not clock gate host when host is in runtime suspended state
Since mmc clock gating is done in a work queue which is not synchronized with host runtime power management, when driver is doing clock gating, host may has already been power gated.
So before driver clock gate host, check whether host is already suspended.
Signed-off-by Chuanxiao Dong <[email protected]>
--- drivers/mmc/core/core.c | 11 +++++++++++ 1 files changed, 11 insertions(+), 0 deletions(-)
drivers/mmc/core/core.c +11 -0
@@ -670,6 +670,17 @@ void mmc_gate_clock(struct mmc_host *host) host->ios.clock =0 ; host->clk_gated = true;spin_unlock_irqrestore (&host->clk_lock, flags); +#ifdef CONFIG_PM_RUNTIME +/* +* mmc clock gating is done in a work queue which +* does not synchronized with host controller runtime +* power management. So when mmc gate clock, host may +* have already in runtime suspend state. In that case, +* driver cannot touch host controller registers +*/ +if (host->class_dev.power.runtime_status !=RPM_ACTIVE ) +return ; +#endif mmc_set_ios (host); }
Signature · 1 line
1.6.6.1