Skip to contentSkip to conversation

crash when loading intelfb on D945GSEJT board

DISCUSSION Oliver Seitz 3 participants 8 messages Feb 13, 2011 – Feb 16, 2011

lore
Share & tools
lore
#0 lore raw

Hi.

I can not make intelfb run on intel board D945GSEJT. I've tried a very clean setup, here's what I've done:

Quoted 1 line

Install a minimal debian squeeze (stable)

$ wget http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.37.tar.bz2
$ tar -xf linux-2.6.37.tar.bz2
$ cd linux-2-6-37
$ make defconfig
Quoted 1 line

using "make menuconfig", I enabled "Configure standard features", disabled "i915", enabled as module "intelfb" with "intelfb_debug"

$ make
$ make modules_install
$ update-initramfs -c -k 2.6.37
$ make install
$ update-grub

When rebooting, the machine crashes in the init sequence by performing a reboot, over and over again. Starting the old kernel, I did:

$ echo "blacklist intelfb" >>/etc/modprobe.d/fbdev-blacklist.conf

Now, the machine boots to a working text mode.

$ modprobe intelfb idonly
FATAL: Error inserting intelfb (/path/to/module/intelfb.ko): No such device

The commands

$ modprobe intelfb probeonly
and
$ modprobe intelfb noregister

execute without error, the module is loaded

The commands

$ modprobe intelfb noinit
and
$ modprobe intelfb

lead to a crash by instant reboot.

Have I done something wrong, or is the 2.6.37 intelfb module broken?

Greets,
Kiste

#1 lore raw

Oh, it seems like I used the wrong driver. intelfb seems to support only i965 up, so for i945 I seem to have to use i915. I'll try again.

Greets,
Kiste

#2 lore raw
In reply to Oliver Seitz
Quoted 5 lines · Oliver Seitz

Hi.

I can not make intelfb run on intel board D945GSEJT. I've tried a very clean setup, here's what I've done:

Why would you want to use intelfb?

Cheers,
Julien

#3 lore raw
Quoted 8 lines · Julien Cristau
Quoted 5 lines · Oliver Seitz

Hi.

I can not make intelfb run on intel board D945GSEJT. I've tried a very clean setup, here's what I've done:

Why would you want to use intelfb?

I did not want to use X, framebuffer is sufficient in my case. So, just by the name, I (seemingly wrong) thought intelfb was the right module.

I'm now trying i915. Sorry for the noise.

Greets,
Kiste

#4 lore raw
Quoted 9 lines · Oliver Seitz
Quoted 8 lines · Julien Cristau
Quoted 5 lines · Oliver Seitz

Hi.

I can not make intelfb run on intel board D945GSEJT. I've tried a very clean setup, here's what I've done:

Why would you want to use intelfb?

I think Julien meant that intelfb should not be used except for special embedded hardware. It's recommended to use KMS and its drmfb.

Regards,
Tino

#5 lore raw
Quoted 5 lines
Quoted 2 lines
Quoted 2 lines

Why would you want to use intelfb?

I think Julien meant that intelfb should not be used except for special embedded hardware. It's recommended to use KMS and its drmfb.

Ah,ok, the application indeed resemles an embedded system: It's always the same motherboard connected to the same LVDS panel, always running the same program at the same resolution. VGA output could occasionally be used for debugging purposes if possible.

The only thing that's coming from the consumer market is the motherboard.

Greets,
Kiste

#6 lore raw
Quoted 7 lines · Oliver Seitz
Quoted 5 lines
Quoted 2 lines
Quoted 2 lines

Why would you want to use intelfb?

I think Julien meant that intelfb should not be used except for special embedded hardware. It's recommended to use KMS and its drmfb.

Ah,ok, the application indeed resemles an embedded system:

[...]

Quoted 1 line

The only thing that's coming from the consumer market is the motherboard.

So it sounds not that special regarding graphics, but more like standard hardware.

Regards,
Tino

#7 lore raw
Quoted 3 lines

So it sounds not that special regarding graphics, but more like standard hardware.

The part of the hardware the graphics drivers have to deal with, yes. So now I'm sure i915 is the right driver, not intelfb.

Thanks again!

Kiste