crash when loading intelfb on D945GSEJT board
Hi.
I can not make intelfb run on intel board D945GSEJT. I've tried a very clean setup, here's what I've done:
Quoted 1 line
Install a minimal debian squeeze (stable)
$ wget http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.37.tar.bz2 $ tar -xf linux-2.6.37.tar.bz2 $ cd linux-2-6-37 $ make defconfig
Quoted 1 line
using "make menuconfig", I enabled "Configure standard features", disabled "i915", enabled as module "intelfb" with "
intelfb_debug"
$ make $ make modules_install $ update-initramfs -c -k 2.6.37 $ make install $ update-grub
When rebooting, the machine crashes in the init sequence by performing a reboot, over and over again. Starting the old kernel, I did:
$ echo "blacklist intelfb" >>/etc/modprobe.d/fbdev-blacklist.conf
Now, the machine boots to a working text mode.
$ modprobe intelfb idonly FATAL: Error inserting intelfb (/path/to/module/intelfb.ko): No such device
The commands
$ modprobe intelfb probeonly and $ modprobe intelfb noregister
execute without error, the module is loaded
The commands
$ modprobe intelfb noinit and $ modprobe intelfb
lead to a crash by instant reboot.
Have I done something wrong, or is the 2.6.37 intelfb module broken?
Greets,
Kiste
Oh, it seems like I used the wrong driver. intelfb seems to support only i965 up, so for i945 I seem to have to use i915. I'll try again.
Greets,
Kiste
Quoted 5 lines · Oliver Seitz
Hi.
I can not make intelfb run on intel board D945GSEJT. I've tried a very clean setup, here's what I've done:
Why would you want to use intelfb?
Cheers,
Julien
Quoted 8 lines · Julien Cristau
Quoted 5 lines · Oliver Seitz
Hi.
I can not make intelfb run on intel board D945GSEJT. I've tried a very clean setup, here's what I've done:
Why would you want to use intelfb?
I did not want to use X, framebuffer is sufficient in my case. So, just by the name, I (seemingly wrong) thought intelfb was the right module.
I'm now trying i915. Sorry for the noise.
Greets,
Kiste
Quoted 9 lines · Oliver Seitz
Quoted 8 lines · Julien Cristau
Quoted 5 lines · Oliver Seitz
Hi.
I can not make intelfb run on intel board D945GSEJT. I've tried a very clean setup, here's what I've done:
Why would you want to use intelfb?
I think Julien meant that intelfb should not be used except for special embedded hardware. It's recommended to use KMS and its drmfb.
Regards,
Tino
Quoted 5 lines
Quoted 2 lines
Quoted 2 lines
Why would you want to use intelfb?
I think Julien meant that intelfb should not be used except for special embedded hardware. It's recommended to use KMS and its drmfb.
Ah,ok, the application indeed resemles an embedded system: It's always the same motherboard connected to the same LVDS panel, always running the same program at the same resolution. VGA output could occasionally be used for debugging purposes if possible.
The only thing that's coming from the consumer market is the motherboard.
Greets,
Kiste
Quoted 7 lines · Oliver Seitz
Quoted 5 lines
Quoted 2 lines
Quoted 2 lines
Why would you want to use intelfb?
I think Julien meant that intelfb should not be used except for special embedded hardware. It's recommended to use KMS and its drmfb.
Ah,ok, the application indeed resemles an embedded system:
[...]
Quoted 1 line
The only thing that's coming from the consumer market is the motherboard.
So it sounds not that special regarding graphics, but more like standard hardware.
Regards,
Tino
Quoted 3 lines
So it sounds not that special regarding graphics, but more like standard hardware.
The part of the hardware the graphics drivers have to deal with, yes. So now I'm sure i915 is the right driver, not intelfb.
Thanks again!
Kiste