dwc_ahsata vs ahci
Hi,
While working on the DM project, I found out that there are two implementations of AHCI drivers - one in block/ahci.c, one in block/dwc_ahsata.c
what is the difference between them (apart from the obvious, ahci.c exposes SCSI API, dwc_ahsata exposes SATA API)? are there any problems that would prevent me from merging them?
thanks
Pavel Herrmann
Quoted 2 lines · Pavel Herrmann
Hi,
Hi Pavel,
Quoted 4 lines
While working on the DM project, I found out that there are two implementations of AHCI drivers - one in
block/ahci.c, one inblock/dwc_ahsata.c
ooopppss !
Quoted 3 lines
what is the difference between them (apart from the obvious,
ahci.cexposes SCSI API,dwc_ahsataexposes SATA API)? are there any problems that would prevent me from merging them?
No, there are not evident reasons !
dwc_asata was inserted to add SATA support for Freescale MX5 family, and I missed that a similar driver was already in u-boot. dwc_ahsata was ported from Freescale's u-boot, and linked only for MX5 / MX6 SOCs. I think it is a very good idea to merge the two drivers (dwc_ahsata seems an updated version of the original driver), thanks to note this !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
Hi Pavel,
The ahci.c is a ahci driver using pci interface, while dwc_asata is not.
u-boot don't have a pure ahci driver now, thus we have to reuse some ahci parts from ahci.c in dwc_asata.c.
Thanks~~
Yours
Terry
-----Original Message-----
From: [email protected] [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Stefano Babic
Sent: 2012?7?29? 14:56
To: Pavel Herrmann
Cc: u-boot at lists.denx.de; u-boot-dm at lists.denx.de
Subject: Re: [U-Boot] dwc_ahsata vs ahci
Quoted 2 lines · Pavel Herrmann
Hi,
Hi Pavel,
Quoted 4 lines
While working on the DM project, I found out that there are two implementations of AHCI drivers - one in
block/ahci.c, one inblock/dwc_ahsata.c
ooopppss !
Quoted 3 lines
what is the difference between them (apart from the obvious,
ahci.cexposes SCSI API,dwc_ahsataexposes SATA API)? are there any problems that would prevent me from merging them?
No, there are not evident reasons !
dwc_asata was inserted to add SATA support for Freescale MX5 family, and I missed that a similar driver was already in u-boot. dwc_ahsata was ported from Freescale's u-boot, and linked only for MX5 / MX6 SOCs. I think it is a very good idea to merge the two drivers (dwc_ahsata seems an updated version of the original driver), thanks to note this !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Dear Lv Terry-R65388,
Quoted 5 lines
Hi Pavel,
The
ahci.cis a ahci driver using pci interface, whiledwc_asatais not.u-boot don't have a pure ahci driver now, thus we have to reuse some
ahci
Quoted 1 line
parts from
ahci.cindwc_asata.c.
Ok, I think we can unify that eventually.
Quoted 50 lines
Thanks~~
Yours
Terry-----Original Message-----
From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Stefano Babic Sent: 2012?7?29? 14:56
To: Pavel Herrmann
Cc: u-boot at lists.denx.de; u-boot-dm at lists.denx.de
Subject: Re: [U-Boot]dwc_ahsatavs ahciQuoted 1 line · Pavel Herrmann
Hi,
Hi Pavel,
Quoted 3 lines
While working on the DM project, I found out that there are two implementations of AHCI drivers - one in
block/ahci.c, one inblock/dwc_ahsata.cooopppss !
Quoted 3 lines
what is the difference between them (apart from the obvious,
ahci.cexposes SCSI API,dwc_ahsataexposes SATA API)? are there any problems that would prevent me from merging them?No, there are not evident reasons !
dwc_asatawas inserted to add SATA support for Freescale MX5 family, and I missed that a similar driver was already in u-boot.dwc_ahsatawas ported from Freescale's u-boot, and linked only for MX5 / MX6 SOCs. I think it is a very good idea to merge the two drivers (dwc_ahsataseems an updated version of the original driver), thanks to note this !Best regards,
Stefano Babic--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Quoted 4 lines
_______________________________________________
U-Boot-DM mailing list
U-Boot-DM at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot-dm
Best regards,
Marek Vasut
Dear Lv Terry-R65388,
Quoted 11 lines
Quoted 5 lines
Hi Pavel,
The
ahci.cis a ahci driver using pci interface, whiledwc_asatais not.u-boot don't have a pure ahci driver now, thus we have to reuse some
ahci
Quoted 1 line
parts from
ahci.cindwc_asata.c.Ok, I think we can unify that eventually.
[...]
Bump? Any effort to do so ?
Best regards,
Marek Vasut