Skip to contentSkip to conversation

dwc_ahsata vs ahci

U-Boot Pavel Herrmann 5 participants 5 messages Jul 28, 2012 – Aug 23, 2012

lore
Share & tools
lore
#0 lore raw

Hi,

While working on the DM project, I found out that there are two implementations of AHCI drivers - one in block/ahci.c, one in block/dwc_ahsata.c

what is the difference between them (apart from the obvious, ahci.c exposes SCSI API, dwc_ahsata exposes SATA API)? are there any problems that would prevent me from merging them?

thanks
Pavel Herrmann

#1 lore raw
Quoted 2 lines · Pavel Herrmann

Hi,

Hi Pavel,

Quoted 4 lines

While working on the DM project, I found out that there are two implementations of AHCI drivers - one in block/ahci.c, one in block/dwc_ahsata.c

ooopppss !

Quoted 3 lines

what is the difference between them (apart from the obvious, ahci.c exposes SCSI API, dwc_ahsata exposes SATA API)? are there any problems that would prevent me from merging them?

No, there are not evident reasons !

dwc_asata was inserted to add SATA support for Freescale MX5 family, and I missed that a similar driver was already in u-boot. dwc_ahsata was ported from Freescale's u-boot, and linked only for MX5 / MX6 SOCs. I think it is a very good idea to merge the two drivers (dwc_ahsata seems an updated version of the original driver), thanks to note this !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#2 lore raw

Hi Pavel,

The ahci.c is a ahci driver using pci interface, while dwc_asata is not.

u-boot don't have a pure ahci driver now, thus we have to reuse some ahci parts from ahci.c in dwc_asata.c.

Thanks~~

Yours
Terry

-----Original Message-----
From: [email protected] [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Stefano Babic
Sent: 2012?7?29? 14:56
To: Pavel Herrmann
Cc: u-boot at lists.denx.de; u-boot-dm at lists.denx.de
Subject: Re: [U-Boot] dwc_ahsata vs ahci

Quoted 2 lines · Pavel Herrmann

Hi,

Hi Pavel,

Quoted 4 lines

While working on the DM project, I found out that there are two implementations of AHCI drivers - one in block/ahci.c, one in block/dwc_ahsata.c

ooopppss !

Quoted 3 lines

what is the difference between them (apart from the obvious, ahci.c exposes SCSI API, dwc_ahsata exposes SATA API)? are there any problems that would prevent me from merging them?

No, there are not evident reasons !

dwc_asata was inserted to add SATA support for Freescale MX5 family, and I missed that a similar driver was already in u-boot. dwc_ahsata was ported from Freescale's u-boot, and linked only for MX5 / MX6 SOCs. I think it is a very good idea to merge the two drivers (dwc_ahsata seems an updated version of the original driver), thanks to note this !

Best regards,
Stefano Babic

--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

#3 lore raw

Dear Lv Terry-R65388,

Quoted 5 lines

Hi Pavel,

The ahci.c is a ahci driver using pci interface, while dwc_asata is not.

u-boot don't have a pure ahci driver now, thus we have to reuse some

ahci

Quoted 1 line

parts from ahci.c in dwc_asata.c.

Ok, I think we can unify that eventually.

Quoted 50 lines

Thanks~~

Yours
Terry

-----Original Message-----
From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Stefano Babic Sent: 2012?7?29? 14:56
To: Pavel Herrmann
Cc: u-boot at lists.denx.de; u-boot-dm at lists.denx.de
Subject: Re: [U-Boot] dwc_ahsata vs ahci

Quoted 1 line · Pavel Herrmann

Hi,

Hi Pavel,

Quoted 3 lines

While working on the DM project, I found out that there are two implementations of AHCI drivers - one in block/ahci.c, one in block/dwc_ahsata.c

ooopppss !

Quoted 3 lines

what is the difference between them (apart from the obvious, ahci.c exposes SCSI API, dwc_ahsata exposes SATA API)? are there any problems that would prevent me from merging them?

No, there are not evident reasons !

dwc_asata was inserted to add SATA support for Freescale MX5 family, and I missed that a similar driver was already in u-boot. dwc_ahsata was ported from Freescale's u-boot, and linked only for MX5 / MX6 SOCs. I think it is a very good idea to merge the two drivers (dwc_ahsata seems an updated version of the original driver), thanks to note this !

Best regards,
Stefano Babic

--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Quoted 4 lines

_______________________________________________
U-Boot-DM mailing list
U-Boot-DM at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot-dm

Best regards,
Marek Vasut

#4 lore raw

Dear Lv Terry-R65388,

Quoted 11 lines
Quoted 5 lines

Hi Pavel,

The ahci.c is a ahci driver using pci interface, while dwc_asata is not.

u-boot don't have a pure ahci driver now, thus we have to reuse some

ahci

Quoted 1 line

parts from ahci.c in dwc_asata.c.

Ok, I think we can unify that eventually.

[...]

Bump? Any effort to do so ?

Best regards,
Marek Vasut