Skip to contentSkip to conversation

package/crosstool-ng: update to 1.16.0

PATCH New Yann E. MORIN 2 participants 8 messages Aug 5, 2012 – Aug 6, 2012

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 package/crosstool-ng: update to 1.16.0

---
 package/crosstool-ng/crosstool-ng.mk               |    2 +-
 .../crosstool-ng.config-eglibc                     |   29 +++++++++------
 .../crosstool-ng.config-glibc                      |   28 +++++++++------
 .../crosstool-ng.config-uClibc                     |   39 +++++++++++---------
 4 files changed, 58 insertions(+), 40 deletions(-)
package/crosstool-ng/crosstool-ng.mk +1 -1
index 379d400..5bc65e1 100644
@@ -1,4 +1,4 @@
-CROSSTOOL_NG_VERSION           = 1.15.3
+CROSSTOOL_NG_VERSION           = 1.16.0
 CROSSTOOL_NG_SOURCE            = crosstool-ng-$(CROSSTOOL_NG_VERSION).tar.bz2
 CROSSTOOL_NG_SITE              = http://crosstool-ng.org/download/crosstool-ng/
 CROSSTOOL_NG_INSTALL_TARGET    = NO
toolchain/toolchain-crosstool-ng/crosstool-ng.config-eglibc +18 -11
index 58cdff2..6c55921 100644
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# crosstool-NG 1.15.0 Configuration
-# Mon May  7 18:54:54 2012
+# crosstool-NG 1.16.0 Configuration
+# Sun Aug  5 20:02:42 2012
 #
 CT_CONFIGURE_has_xz=y
 CT_CONFIGURE_has_cvs=y
@@ -178,17 +178,15 @@ CT_BUILD_SUFFIX=""
 #
 CT_KERNEL_SUPPORTS_SHARED_LIBS=y
 CT_KERNEL="linux"
-CT_KERNEL_VERSION="3.3.4"
+CT_KERNEL_VERSION="3.5"
 CT_KERNEL_linux=y
 CT_KERNEL_linux_AVAILABLE=y
-CT_KERNEL_V_3_3_4=y
-# CT_KERNEL_V_3_3_3 is not set
-# CT_KERNEL_V_3_3_2 is not set
-# CT_KERNEL_V_3_3_1 is not set
-# CT_KERNEL_V_3_3 is not set
-# CT_KERNEL_V_3_2_16 is not set
+CT_KERNEL_V_3_5=y
+# CT_KERNEL_V_3_4_7 is not set
+# CT_KERNEL_V_3_3_8 is not set
+# CT_KERNEL_V_3_2_25 is not set
 # CT_KERNEL_V_3_1_10 is not set
-# CT_KERNEL_V_3_0_30 is not set
+# CT_KERNEL_V_3_0_39 is not set
 # CT_KERNEL_V_2_6_39_4 is not set
 # CT_KERNEL_V_2_6_38_8 is not set
 # CT_KERNEL_V_2_6_37_6 is not set
@@ -326,6 +324,7 @@ CT_LIBC="eglibc"
 CT_LIBC_VERSION="2_12"
 CT_LIBC_eglibc=y
 CT_LIBC_eglibc_AVAILABLE=y
+# CT_LIBC_EGLIBC_V_2_16 is not set
 # CT_LIBC_EGLIBC_V_2_15 is not set
 # CT_LIBC_EGLIBC_V_2_14 is not set
 # CT_LIBC_EGLIBC_V_2_13 is not set
@@ -394,7 +393,7 @@ CT_LIBC_ADDONS_LIST=""
 # CT_LIBC_GLIBC_KERNEL_VERSION_NONE is not set
 CT_LIBC_GLIBC_KERNEL_VERSION_AS_HEADERS=y
 # CT_LIBC_GLIBC_KERNEL_VERSION_CHOSEN is not set
-CT_LIBC_GLIBC_MIN_KERNEL="3.3.4"
+CT_LIBC_GLIBC_MIN_KERNEL="3.5"
 
 #
 # Debug facilities
@@ -414,17 +413,25 @@ CT_GMP=y
 CT_MPFR=y
 CT_PPL=y
 CT_CLOOG=y
+# CT_GMP_V_5_0_2 is not set
+# CT_GMP_V_5_0_1 is not set
 CT_GMP_V_4_3_2=y
 # CT_GMP_V_4_3_1 is not set
 # CT_GMP_V_4_3_0 is not set
 CT_GMP_VERSION="4.3.2"
+# CT_MPFR_V_3_1_0 is not set
+# CT_MPFR_V_3_0_1 is not set
 # CT_MPFR_V_3_0_0 is not set
 CT_MPFR_V_2_4_2=y
 # CT_MPFR_V_2_4_1 is not set
 # CT_MPFR_V_2_4_0 is not set
 CT_MPFR_VERSION="2.4.2"
+# CT_PPL_V_0_11_2 is not set
+# CT_PPL_V_0_11_1 is not set
+# CT_PPL_V_0_11 is not set
 CT_PPL_V_0_10_2=y
 CT_PPL_VERSION="0.10.2"
+# CT_CLOOG_V_0_15_11 is not set
 # CT_CLOOG_V_0_15_10 is not set
 CT_CLOOG_V_0_15_9=y
 # CT_CLOOG_V_0_15_8 is not set
toolchain/toolchain-crosstool-ng/crosstool-ng.config-glibc +17 -11
index db724ab..3910bdb 100644
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# crosstool-NG 1.15.0 Configuration
-# Mon May  7 18:58:51 2012
+# crosstool-NG 1.16.0 Configuration
+# Sun Aug  5 21:39:12 2012
 #
 CT_CONFIGURE_has_xz=y
 CT_CONFIGURE_has_cvs=y
@@ -178,17 +178,15 @@ CT_BUILD_SUFFIX=""
 #
 CT_KERNEL_SUPPORTS_SHARED_LIBS=y
 CT_KERNEL="linux"
-CT_KERNEL_VERSION="3.3.4"
+CT_KERNEL_VERSION="3.5"
 CT_KERNEL_linux=y
 CT_KERNEL_linux_AVAILABLE=y
-CT_KERNEL_V_3_3_4=y
-# CT_KERNEL_V_3_3_3 is not set
-# CT_KERNEL_V_3_3_2 is not set
-# CT_KERNEL_V_3_3_1 is not set
-# CT_KERNEL_V_3_3 is not set
-# CT_KERNEL_V_3_2_16 is not set
+CT_KERNEL_V_3_5=y
+# CT_KERNEL_V_3_4_7 is not set
+# CT_KERNEL_V_3_3_8 is not set
+# CT_KERNEL_V_3_2_25 is not set
 # CT_KERNEL_V_3_1_10 is not set
-# CT_KERNEL_V_3_0_30 is not set
+# CT_KERNEL_V_3_0_39 is not set
 # CT_KERNEL_V_2_6_39_4 is not set
 # CT_KERNEL_V_2_6_38_8 is not set
 # CT_KERNEL_V_2_6_37_6 is not set
@@ -361,7 +359,7 @@ CT_LIBC_ADDONS_LIST=""
 # CT_LIBC_GLIBC_KERNEL_VERSION_NONE is not set
 CT_LIBC_GLIBC_KERNEL_VERSION_AS_HEADERS=y
 # CT_LIBC_GLIBC_KERNEL_VERSION_CHOSEN is not set
-CT_LIBC_GLIBC_MIN_KERNEL="3.3.4"
+CT_LIBC_GLIBC_MIN_KERNEL="3.5"
 
 #
 # glibc other options
@@ -405,17 +403,25 @@ CT_GMP=y
 CT_MPFR=y
 CT_PPL=y
 CT_CLOOG=y
+# CT_GMP_V_5_0_2 is not set
+# CT_GMP_V_5_0_1 is not set
 CT_GMP_V_4_3_2=y
 # CT_GMP_V_4_3_1 is not set
 # CT_GMP_V_4_3_0 is not set
 CT_GMP_VERSION="4.3.2"
+# CT_MPFR_V_3_1_0 is not set
+# CT_MPFR_V_3_0_1 is not set
 # CT_MPFR_V_3_0_0 is not set
 CT_MPFR_V_2_4_2=y
 # CT_MPFR_V_2_4_1 is not set
 # CT_MPFR_V_2_4_0 is not set
 CT_MPFR_VERSION="2.4.2"
+# CT_PPL_V_0_11_2 is not set
+# CT_PPL_V_0_11_1 is not set
+# CT_PPL_V_0_11 is not set
 CT_PPL_V_0_10_2=y
 CT_PPL_VERSION="0.10.2"
+# CT_CLOOG_V_0_15_11 is not set
 # CT_CLOOG_V_0_15_10 is not set
 CT_CLOOG_V_0_15_9=y
 # CT_CLOOG_V_0_15_8 is not set
toolchain/toolchain-crosstool-ng/crosstool-ng.config-uClibc +22 -17
index 5f1ee7e..5155e6c 100644
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# crosstool-NG 1.15.0 Configuration
-# Mon May  7 18:49:59 2012
+# crosstool-NG 1.16.0 Configuration
+# Sun Aug  5 17:33:46 2012
 #
 CT_CONFIGURE_has_xz=y
 CT_CONFIGURE_has_cvs=y
@@ -178,17 +178,15 @@ CT_BUILD_SUFFIX=""
 #
 CT_KERNEL_SUPPORTS_SHARED_LIBS=y
 CT_KERNEL="linux"
-CT_KERNEL_VERSION="3.3.4"
+CT_KERNEL_VERSION="3.5"
 CT_KERNEL_linux=y
 CT_KERNEL_linux_AVAILABLE=y
-CT_KERNEL_V_3_3_4=y
-# CT_KERNEL_V_3_3_3 is not set
-# CT_KERNEL_V_3_3_2 is not set
-# CT_KERNEL_V_3_3_1 is not set
-# CT_KERNEL_V_3_3 is not set
-# CT_KERNEL_V_3_2_16 is not set
+CT_KERNEL_V_3_5=y
+# CT_KERNEL_V_3_4_7 is not set
+# CT_KERNEL_V_3_3_8 is not set
+# CT_KERNEL_V_3_2_25 is not set
 # CT_KERNEL_V_3_1_10 is not set
-# CT_KERNEL_V_3_0_30 is not set
+# CT_KERNEL_V_3_0_39 is not set
 # CT_KERNEL_V_2_6_39_4 is not set
 # CT_KERNEL_V_2_6_38_8 is not set
 # CT_KERNEL_V_2_6_37_6 is not set
@@ -322,10 +320,11 @@ CT_CC_GCC_LDBL_128=m
 # C-library
 #
 CT_LIBC="uClibc"
-CT_LIBC_VERSION="0.9.33.1"
+CT_LIBC_VERSION="0.9.33.2"
 CT_LIBC_uClibc=y
 CT_LIBC_uClibc_AVAILABLE=y
-# CT_LIBC_UCLIBC_V_0_9_33_1=y
+CT_LIBC_UCLIBC_V_0_9_33_2=y
+# CT_LIBC_UCLIBC_V_0_9_33_1 is not set
 # CT_LIBC_UCLIBC_V_0_9_33 is not set
 # CT_LIBC_UCLIBC_V_0_9_32_1 is not set
 # CT_LIBC_UCLIBC_V_0_9_32 is not set
@@ -350,7 +349,7 @@ CT_LIBC_SUPPORT_THREADS_ANY=y
 CT_LIBC_SUPPORT_NPTL=y
 CT_LIBC_SUPPORT_LINUXTHREADS=y
 CT_LIBC_SUPPORT_THREADS_NONE=y
-CT_THREADS="linuxthreads"
+CT_THREADS="nptl"
 
 #
 # Common C library options
@@ -363,11 +362,9 @@ CT_LIBC_XLDD=y
 #
 # uClibc other options
 #
-CT_LIBC_UCLIBC_LNXTHRD_OLD=y
-# CT_LIBC_UCLIBC_LNXTHRD_NEW is not set
-CT_LIBC_UCLIBC_LNXTHRD="old"
+CT_LIBC_UCLIBC_LNXTHRD=""
 # CT_LIBC_UCLIBC_LOCALES is not set
-# CT_LIBC_UCLIBC_WCHAR is not set
+CT_LIBC_UCLIBC_WCHAR=y
 
 #
 # Debug facilities
@@ -387,17 +384,25 @@ CT_GMP=y
 CT_MPFR=y
 CT_PPL=y
 CT_CLOOG=y
+# CT_GMP_V_5_0_2 is not set
+# CT_GMP_V_5_0_1 is not set
 CT_GMP_V_4_3_2=y
 # CT_GMP_V_4_3_1 is not set
 # CT_GMP_V_4_3_0 is not set
 CT_GMP_VERSION="4.3.2"
+# CT_MPFR_V_3_1_0 is not set
+# CT_MPFR_V_3_0_1 is not set
 # CT_MPFR_V_3_0_0 is not set
 CT_MPFR_V_2_4_2=y
 # CT_MPFR_V_2_4_1 is not set
 # CT_MPFR_V_2_4_0 is not set
 CT_MPFR_VERSION="2.4.2"
+# CT_PPL_V_0_11_2 is not set
+# CT_PPL_V_0_11_1 is not set
+# CT_PPL_V_0_11 is not set
 CT_PPL_V_0_10_2=y
 CT_PPL_VERSION="0.10.2"
+# CT_CLOOG_V_0_15_11 is not set
 # CT_CLOOG_V_0_15_10 is not set
 CT_CLOOG_V_0_15_9=y
 # CT_CLOOG_V_0_15_8 is not set
Signature · 1 line
1.7.2.5
#1 lore raw

PATCH 1/1 package/crosstool-ng: update to 1.16.0

Thomas, All,

Quoted 7 lines · On Sunday 05 August 2012 22:05:56 Yann E. MORIN wrote:
---
 package/crosstool-ng/crosstool-ng.mk               |    2 +-
 .../crosstool-ng.config-eglibc                     |   29 +++++++++------
 .../crosstool-ng.config-glibc                      |   28 +++++++++------
 .../crosstool-ng.config-uClibc                     |   39 +++++++++++---------
 4 files changed, 58 insertions(+), 40 deletions(-)

That one comes a bit after -rc1, because the crosstool-NG release was a bit late (4 days late). Nonetheless, it is not really late when compared to the submissions for previous releases (2012.05: the 8th, 2012.02: the 9th).

Regards,
Yann E. MORIN.

Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#2 lore raw

PATCH 1/1 package/crosstool-ng: update to 1.16.0

In reply to Yann E. MORIN

Hello,

Le Sun, 5 Aug 2012 22:05:56 +0200,
"Yann E. MORIN" <[email protected]> a ?crit :

Quoted 7 lines
---
 package/crosstool-ng/crosstool-ng.mk               |    2 +-
 .../crosstool-ng.config-eglibc                     |   29 +++++++++------
 .../crosstool-ng.config-glibc                      |   28 +++++++++------
 .../crosstool-ng.config-uClibc                     |   39 +++++++++++---------
 4 files changed, 58 insertions(+), 40 deletions(-)

Wouldn't it be possible to use mini-defconfigs instead of those full .config?

Best regards,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#3 lore raw

PATCH 1/1 package/crosstool-ng: update to 1.16.0

Thomas, All,

Quoted 11 lines · On Sunday 05 August 2012 22:18:32 Thomas Petazzoni wrote:

Le Sun, 5 Aug 2012 22:05:56 +0200,
"Yann E. MORIN" <[email protected]> a ?crit :

Quoted 7 lines
---
 package/crosstool-ng/crosstool-ng.mk               |    2 +-
 .../crosstool-ng.config-eglibc                     |   29 +++++++++------
 .../crosstool-ng.config-glibc                      |   28 +++++++++------
 .../crosstool-ng.config-uClibc                     |   39 +++++++++++---------
 4 files changed, 58 insertions(+), 40 deletions(-)
Quoted 2 lines

Wouldn't it be possible to use mini-defconfigs instead of those full .config?

Yes, it would be nice, but there's no provision in crosstool-NG to use a defconfig file, except from the bundeled samples.

I'll add this feature so that it is available in the next release.

Regards,
Yann E. MORIN.

Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#4 lore raw

PATCH 1/1 package/crosstool-ng: update to 1.16.0

Le Sun, 5 Aug 2012 22:48:32 +0200,
"Yann E. MORIN" <[email protected]> a ?crit :

Quoted 2 lines

Yes, it would be nice, but there's no provision in crosstool-NG to use a defconfig file, except from the bundeled samples.

Well, then we can do just like we do for the kernel:

	install -D crosstool-ng.config $(CROSSTOOL_NG_BUILD_DIR)/samples/buildroot/crosstool-ng.config
	ct-ng buildroot
	ct-ng build

And there you are :-)

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#5 lore raw

PATCH 1/1 package/crosstool-ng: update to 1.16.0

Thomas, All,

Quoted 6 lines · On Sunday 05 August 2012 23:26:56 Thomas Petazzoni wrote:

Le Sun, 5 Aug 2012 22:48:32 +0200,
"Yann E. MORIN" <[email protected]> a ?crit :

Quoted 2 lines

Yes, it would be nice, but there's no provision in crosstool-NG to use a defconfig file, except from the bundeled samples.

Quoted 7 lines

Well, then we can do just like we do for the kernel:

	install -D crosstool-ng.config $(CROSSTOOL_NG_BUILD_DIR)/samples/buildroot/crosstool-ng.config
	ct-ng buildroot
	ct-ng build

And there you are :-)

I guess it is too late for this release cycle, and hopefully crosstool-NG will gain such an ability t the next release.

Regards,
Yann E. MORIN.

Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#6 lore raw

PATCH 1/1 package/crosstool-ng: update to 1.16.0

In reply to Yann E. MORIN

Le Sun, 5 Aug 2012 22:05:56 +0200,
"Yann E. MORIN" <[email protected]> a ?crit :

Quoted 7 lines
---
 package/crosstool-ng/crosstool-ng.mk               |    2 +-
 .../crosstool-ng.config-eglibc                     |   29 +++++++++------
 .../crosstool-ng.config-glibc                      |   28 +++++++++------
 .../crosstool-ng.config-uClibc                     |   39 +++++++++++---------
 4 files changed, 58 insertions(+), 40 deletions(-)

Ok, I've made an exception for this and pushed it to master even though version bumps are not supposed to be merged at this point. If anything breaks because of this, I'll revert :-)

Thanks!

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#7 lore raw

PATCH 1/1 package/crosstool-ng: update to 1.16.0

Thomas, All,

Quoted 11 lines · On Monday 06 August 2012 14:57:02 Thomas Petazzoni wrote:

Le Sun, 5 Aug 2012 22:05:56 +0200,
"Yann E. MORIN" <[email protected]> a ?crit :

Quoted 7 lines
---
 package/crosstool-ng/crosstool-ng.mk               |    2 +-
 .../crosstool-ng.config-eglibc                     |   29 +++++++++------
 .../crosstool-ng.config-glibc                      |   28 +++++++++------
 .../crosstool-ng.config-uClibc                     |   39 +++++++++++---------
 4 files changed, 58 insertions(+), 40 deletions(-)
Quoted 3 lines

Ok, I've made an exception for this and pushed it to master even though version bumps are not supposed to be merged at this point. If anything breaks because of this, I'll revert :-)

Yes, sure. But as crosstool-NG is (usually) released the day buildroot switches to -rc1, it's not easy to submit before -rc1. And Peter usually accepted this bump after -rc1.

But I do understand your point of view as the substitue maintainer to be chilly on this. ;-)

Be sure to keep me posted if things break, so I have a chance to fixing it.

Regards,
Yann E. MORIN.

Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'