package/crosstool-ng: update to 1.16.0
PATCH 1/1 package/crosstool-ng: update to 1.16.0
--- package/crosstool-ng/crosstool-ng.mk | 2 +- .../crosstool-ng.config-eglibc | 29 +++++++++------ .../crosstool-ng.config-glibc | 28 +++++++++------ .../crosstool-ng.config-uClibc | 39 +++++++++++--------- 4 files changed, 58 insertions(+), 40 deletions(-)
package/crosstool-ng/crosstool-ng.mk +1 -1
@@ -1,4 +1,4 @@ -CROSSTOOL_NG_VERSION = 1.15.3 +CROSSTOOL_NG_VERSION = 1.16.0 CROSSTOOL_NG_SOURCE = crosstool-ng-$(CROSSTOOL_NG_VERSION).tar.bz2 CROSSTOOL_NG_SITE = http://crosstool-ng.org/download/crosstool-ng/ CROSSTOOL_NG_INSTALL_TARGET = NO
toolchain/toolchain-crosstool-ng/crosstool-ng.config-eglibc +18 -11
@@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# crosstool-NG 1.15.0 Configuration -# Mon May 7 18:54:54 2012 +# crosstool-NG 1.16.0 Configuration +# Sun Aug 5 20:02:42 2012 # CT_CONFIGURE_has_xz=y CT_CONFIGURE_has_cvs=y
@@ -178,17 +178,15 @@ CT_BUILD_SUFFIX="" # CT_KERNEL_SUPPORTS_SHARED_LIBS=y CT_KERNEL="linux" -CT_KERNEL_VERSION="3.3.4" +CT_KERNEL_VERSION="3.5" CT_KERNEL_linux=y CT_KERNEL_linux_AVAILABLE=y -CT_KERNEL_V_3_3_4=y -# CT_KERNEL_V_3_3_3 is not set -# CT_KERNEL_V_3_3_2 is not set -# CT_KERNEL_V_3_3_1 is not set -# CT_KERNEL_V_3_3 is not set -# CT_KERNEL_V_3_2_16 is not set +CT_KERNEL_V_3_5=y +# CT_KERNEL_V_3_4_7 is not set +# CT_KERNEL_V_3_3_8 is not set +# CT_KERNEL_V_3_2_25 is not set # CT_KERNEL_V_3_1_10 is not set -# CT_KERNEL_V_3_0_30 is not set +# CT_KERNEL_V_3_0_39 is not set # CT_KERNEL_V_2_6_39_4 is not set # CT_KERNEL_V_2_6_38_8 is not set # CT_KERNEL_V_2_6_37_6 is not set
@@ -326,6 +324,7 @@ CT_LIBC="eglibc" CT_LIBC_VERSION="2_12" CT_LIBC_eglibc=y CT_LIBC_eglibc_AVAILABLE=y +# CT_LIBC_EGLIBC_V_2_16 is not set # CT_LIBC_EGLIBC_V_2_15 is not set # CT_LIBC_EGLIBC_V_2_14 is not set # CT_LIBC_EGLIBC_V_2_13 is not set
@@ -394,7 +393,7 @@ CT_LIBC_ADDONS_LIST="" # CT_LIBC_GLIBC_KERNEL_VERSION_NONE is not set CT_LIBC_GLIBC_KERNEL_VERSION_AS_HEADERS=y # CT_LIBC_GLIBC_KERNEL_VERSION_CHOSEN is not set -CT_LIBC_GLIBC_MIN_KERNEL="3.3.4" +CT_LIBC_GLIBC_MIN_KERNEL="3.5" # # Debug facilities
@@ -414,17 +413,25 @@ CT_GMP=y CT_MPFR=y CT_PPL=y CT_CLOOG=y +# CT_GMP_V_5_0_2 is not set +# CT_GMP_V_5_0_1 is not set CT_GMP_V_4_3_2=y # CT_GMP_V_4_3_1 is not set # CT_GMP_V_4_3_0 is not set CT_GMP_VERSION="4.3.2" +# CT_MPFR_V_3_1_0 is not set +# CT_MPFR_V_3_0_1 is not set # CT_MPFR_V_3_0_0 is not set CT_MPFR_V_2_4_2=y # CT_MPFR_V_2_4_1 is not set # CT_MPFR_V_2_4_0 is not set CT_MPFR_VERSION="2.4.2" +# CT_PPL_V_0_11_2 is not set +# CT_PPL_V_0_11_1 is not set +# CT_PPL_V_0_11 is not set CT_PPL_V_0_10_2=y CT_PPL_VERSION="0.10.2" +# CT_CLOOG_V_0_15_11 is not set # CT_CLOOG_V_0_15_10 is not set CT_CLOOG_V_0_15_9=y # CT_CLOOG_V_0_15_8 is not set
toolchain/toolchain-crosstool-ng/crosstool-ng.config-glibc +17 -11
@@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# crosstool-NG 1.15.0 Configuration -# Mon May 7 18:58:51 2012 +# crosstool-NG 1.16.0 Configuration +# Sun Aug 5 21:39:12 2012 # CT_CONFIGURE_has_xz=y CT_CONFIGURE_has_cvs=y
@@ -178,17 +178,15 @@ CT_BUILD_SUFFIX="" # CT_KERNEL_SUPPORTS_SHARED_LIBS=y CT_KERNEL="linux" -CT_KERNEL_VERSION="3.3.4" +CT_KERNEL_VERSION="3.5" CT_KERNEL_linux=y CT_KERNEL_linux_AVAILABLE=y -CT_KERNEL_V_3_3_4=y -# CT_KERNEL_V_3_3_3 is not set -# CT_KERNEL_V_3_3_2 is not set -# CT_KERNEL_V_3_3_1 is not set -# CT_KERNEL_V_3_3 is not set -# CT_KERNEL_V_3_2_16 is not set +CT_KERNEL_V_3_5=y +# CT_KERNEL_V_3_4_7 is not set +# CT_KERNEL_V_3_3_8 is not set +# CT_KERNEL_V_3_2_25 is not set # CT_KERNEL_V_3_1_10 is not set -# CT_KERNEL_V_3_0_30 is not set +# CT_KERNEL_V_3_0_39 is not set # CT_KERNEL_V_2_6_39_4 is not set # CT_KERNEL_V_2_6_38_8 is not set # CT_KERNEL_V_2_6_37_6 is not set
@@ -361,7 +359,7 @@ CT_LIBC_ADDONS_LIST="" # CT_LIBC_GLIBC_KERNEL_VERSION_NONE is not set CT_LIBC_GLIBC_KERNEL_VERSION_AS_HEADERS=y # CT_LIBC_GLIBC_KERNEL_VERSION_CHOSEN is not set -CT_LIBC_GLIBC_MIN_KERNEL="3.3.4" +CT_LIBC_GLIBC_MIN_KERNEL="3.5" # # glibc other options
@@ -405,17 +403,25 @@ CT_GMP=y CT_MPFR=y CT_PPL=y CT_CLOOG=y +# CT_GMP_V_5_0_2 is not set +# CT_GMP_V_5_0_1 is not set CT_GMP_V_4_3_2=y # CT_GMP_V_4_3_1 is not set # CT_GMP_V_4_3_0 is not set CT_GMP_VERSION="4.3.2" +# CT_MPFR_V_3_1_0 is not set +# CT_MPFR_V_3_0_1 is not set # CT_MPFR_V_3_0_0 is not set CT_MPFR_V_2_4_2=y # CT_MPFR_V_2_4_1 is not set # CT_MPFR_V_2_4_0 is not set CT_MPFR_VERSION="2.4.2" +# CT_PPL_V_0_11_2 is not set +# CT_PPL_V_0_11_1 is not set +# CT_PPL_V_0_11 is not set CT_PPL_V_0_10_2=y CT_PPL_VERSION="0.10.2" +# CT_CLOOG_V_0_15_11 is not set # CT_CLOOG_V_0_15_10 is not set CT_CLOOG_V_0_15_9=y # CT_CLOOG_V_0_15_8 is not set
toolchain/toolchain-crosstool-ng/crosstool-ng.config-uClibc +22 -17
@@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# crosstool-NG 1.15.0 Configuration -# Mon May 7 18:49:59 2012 +# crosstool-NG 1.16.0 Configuration +# Sun Aug 5 17:33:46 2012 # CT_CONFIGURE_has_xz=y CT_CONFIGURE_has_cvs=y
@@ -178,17 +178,15 @@ CT_BUILD_SUFFIX="" # CT_KERNEL_SUPPORTS_SHARED_LIBS=y CT_KERNEL="linux" -CT_KERNEL_VERSION="3.3.4" +CT_KERNEL_VERSION="3.5" CT_KERNEL_linux=y CT_KERNEL_linux_AVAILABLE=y -CT_KERNEL_V_3_3_4=y -# CT_KERNEL_V_3_3_3 is not set -# CT_KERNEL_V_3_3_2 is not set -# CT_KERNEL_V_3_3_1 is not set -# CT_KERNEL_V_3_3 is not set -# CT_KERNEL_V_3_2_16 is not set +CT_KERNEL_V_3_5=y +# CT_KERNEL_V_3_4_7 is not set +# CT_KERNEL_V_3_3_8 is not set +# CT_KERNEL_V_3_2_25 is not set # CT_KERNEL_V_3_1_10 is not set -# CT_KERNEL_V_3_0_30 is not set +# CT_KERNEL_V_3_0_39 is not set # CT_KERNEL_V_2_6_39_4 is not set # CT_KERNEL_V_2_6_38_8 is not set # CT_KERNEL_V_2_6_37_6 is not set
@@ -322,10 +320,11 @@ CT_CC_GCC_LDBL_128=m # C-library # CT_LIBC="uClibc" -CT_LIBC_VERSION="0.9.33.1" +CT_LIBC_VERSION="0.9.33.2" CT_LIBC_uClibc=y CT_LIBC_uClibc_AVAILABLE=y -# CT_LIBC_UCLIBC_V_0_9_33_1=y +CT_LIBC_UCLIBC_V_0_9_33_2=y +# CT_LIBC_UCLIBC_V_0_9_33_1 is not set # CT_LIBC_UCLIBC_V_0_9_33 is not set # CT_LIBC_UCLIBC_V_0_9_32_1 is not set # CT_LIBC_UCLIBC_V_0_9_32 is not set
@@ -350,7 +349,7 @@ CT_LIBC_SUPPORT_THREADS_ANY=y CT_LIBC_SUPPORT_NPTL=y CT_LIBC_SUPPORT_LINUXTHREADS=y CT_LIBC_SUPPORT_THREADS_NONE=y -CT_THREADS="linuxthreads" +CT_THREADS="nptl" # # Common C library options
@@ -363,11 +362,9 @@ CT_LIBC_XLDD=y # # uClibc other options # -CT_LIBC_UCLIBC_LNXTHRD_OLD=y -# CT_LIBC_UCLIBC_LNXTHRD_NEW is not set -CT_LIBC_UCLIBC_LNXTHRD="old" +CT_LIBC_UCLIBC_LNXTHRD="" # CT_LIBC_UCLIBC_LOCALES is not set -# CT_LIBC_UCLIBC_WCHAR is not set +CT_LIBC_UCLIBC_WCHAR=y # # Debug facilities
@@ -387,17 +384,25 @@ CT_GMP=y CT_MPFR=y CT_PPL=y CT_CLOOG=y +# CT_GMP_V_5_0_2 is not set +# CT_GMP_V_5_0_1 is not set CT_GMP_V_4_3_2=y # CT_GMP_V_4_3_1 is not set # CT_GMP_V_4_3_0 is not set CT_GMP_VERSION="4.3.2" +# CT_MPFR_V_3_1_0 is not set +# CT_MPFR_V_3_0_1 is not set # CT_MPFR_V_3_0_0 is not set CT_MPFR_V_2_4_2=y # CT_MPFR_V_2_4_1 is not set # CT_MPFR_V_2_4_0 is not set CT_MPFR_VERSION="2.4.2" +# CT_PPL_V_0_11_2 is not set +# CT_PPL_V_0_11_1 is not set +# CT_PPL_V_0_11 is not set CT_PPL_V_0_10_2=y CT_PPL_VERSION="0.10.2" +# CT_CLOOG_V_0_15_11 is not set # CT_CLOOG_V_0_15_10 is not set CT_CLOOG_V_0_15_9=y # CT_CLOOG_V_0_15_8 is not set
Signature · 1 line
1.7.2.5
PATCH 1/1 package/crosstool-ng: update to 1.16.0
Thomas, All,
Quoted 7 lines · On Sunday 05 August 2012 22:05:56 Yann E. MORIN wrote:
Signed-off-by "Yann E. MORIN" <[email protected]>--- package/crosstool-ng/crosstool-ng.mk | 2 +- .../crosstool-ng.config-eglibc | 29 +++++++++------ .../crosstool-ng.config-glibc | 28 +++++++++------ .../crosstool-ng.config-uClibc | 39 +++++++++++--------- 4 files changed, 58 insertions(+), 40 deletions(-)
That one comes a bit after -rc1, because the crosstool-NG release was a bit late (4 days late). Nonetheless, it is not really late when compared to the submissions for previous releases (2012.05: the 8th, 2012.02: the 9th).
Regards,
Yann E. MORIN.
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH 1/1 package/crosstool-ng: update to 1.16.0
In reply to Yann E. MORINHello,
Le Sun, 5 Aug 2012 22:05:56 +0200,
"Yann E. MORIN" <[email protected]> a ?crit :
Quoted 7 lines
Signed-off-by "Yann E. MORIN" <[email protected]>--- package/crosstool-ng/crosstool-ng.mk | 2 +- .../crosstool-ng.config-eglibc | 29 +++++++++------ .../crosstool-ng.config-glibc | 28 +++++++++------ .../crosstool-ng.config-uClibc | 39 +++++++++++--------- 4 files changed, 58 insertions(+), 40 deletions(-)
Wouldn't it be possible to use mini-defconfigs instead of those full .config?
Best regards,
Thomas
Signature · 4 lines
Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH 1/1 package/crosstool-ng: update to 1.16.0
Thomas, All,
Quoted 11 lines · On Sunday 05 August 2012 22:18:32 Thomas Petazzoni wrote:
Le Sun, 5 Aug 2012 22:05:56 +0200,
"Yann E. MORIN" <[email protected]> a ?crit :Quoted 7 lines
Signed-off-by "Yann E. MORIN" <[email protected]>--- package/crosstool-ng/crosstool-ng.mk | 2 +- .../crosstool-ng.config-eglibc | 29 +++++++++------ .../crosstool-ng.config-glibc | 28 +++++++++------ .../crosstool-ng.config-uClibc | 39 +++++++++++--------- 4 files changed, 58 insertions(+), 40 deletions(-)
Quoted 2 lines
Wouldn't it be possible to use mini-defconfigs instead of those full .config?
Yes, it would be nice, but there's no provision in crosstool-NG to use a defconfig file, except from the bundeled samples.
I'll add this feature so that it is available in the next release.
Regards,
Yann E. MORIN.
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH 1/1 package/crosstool-ng: update to 1.16.0
Le Sun, 5 Aug 2012 22:48:32 +0200,
"Yann E. MORIN" <[email protected]> a ?crit :
Quoted 2 lines
Yes, it would be nice, but there's no provision in crosstool-NG to use a defconfig file, except from the bundeled samples.
Well, then we can do just like we do for the kernel:
install -D crosstool-ng.config $(CROSSTOOL_NG_BUILD_DIR)/samples/buildroot/crosstool-ng.config ct-ng buildroot ct-ng build
And there you are :-)
Thomas
Signature · 4 lines
Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH 1/1 package/crosstool-ng: update to 1.16.0
Thomas, All,
Quoted 6 lines · On Sunday 05 August 2012 23:26:56 Thomas Petazzoni wrote:
Le Sun, 5 Aug 2012 22:48:32 +0200,
"Yann E. MORIN" <[email protected]> a ?crit :Quoted 2 lines
Yes, it would be nice, but there's no provision in crosstool-NG to use a defconfig file, except from the bundeled samples.
Quoted 7 lines
Well, then we can do just like we do for the kernel:
install -D crosstool-ng.config $(CROSSTOOL_NG_BUILD_DIR)/samples/buildroot/crosstool-ng.config ct-ng buildroot ct-ng buildAnd there you are :-)
I guess it is too late for this release cycle, and hopefully crosstool-NG will gain such an ability t the next release.
Regards,
Yann E. MORIN.
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH 1/1 package/crosstool-ng: update to 1.16.0
In reply to Yann E. MORINLe Sun, 5 Aug 2012 22:05:56 +0200,
"Yann E. MORIN" <[email protected]> a ?crit :
Quoted 7 lines
Signed-off-by "Yann E. MORIN" <[email protected]>--- package/crosstool-ng/crosstool-ng.mk | 2 +- .../crosstool-ng.config-eglibc | 29 +++++++++------ .../crosstool-ng.config-glibc | 28 +++++++++------ .../crosstool-ng.config-uClibc | 39 +++++++++++--------- 4 files changed, 58 insertions(+), 40 deletions(-)
Ok, I've made an exception for this and pushed it to master even though version bumps are not supposed to be merged at this point. If anything breaks because of this, I'll revert :-)
Thanks!
Thomas
Signature · 4 lines
Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH 1/1 package/crosstool-ng: update to 1.16.0
Thomas, All,
Quoted 11 lines · On Monday 06 August 2012 14:57:02 Thomas Petazzoni wrote:
Le Sun, 5 Aug 2012 22:05:56 +0200,
"Yann E. MORIN" <[email protected]> a ?crit :Quoted 7 lines
Signed-off-by "Yann E. MORIN" <[email protected]>--- package/crosstool-ng/crosstool-ng.mk | 2 +- .../crosstool-ng.config-eglibc | 29 +++++++++------ .../crosstool-ng.config-glibc | 28 +++++++++------ .../crosstool-ng.config-uClibc | 39 +++++++++++--------- 4 files changed, 58 insertions(+), 40 deletions(-)
Quoted 3 lines
Ok, I've made an exception for this and pushed it to master even though version bumps are not supposed to be merged at this point. If anything breaks because of this, I'll revert :-)
Yes, sure. But as crosstool-NG is (usually) released the day buildroot switches to -rc1, it's not easy to submit before -rc1. And Peter usually accepted this bump after -rc1.
But I do understand your point of view as the substitue maintainer to be chilly on this. ;-)
Be sure to keep me posted if things break, so I have a chance to fixing it.
Regards,
Yann E. MORIN.
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'