Beaglebone BSP for denzil?
Hello,
Am I correct in understanding that the TI Beagleboard BSP from yoctoproject.org should work with the Beaglebone, or do I need meta-ti? I'm not looking for accelerated graphics or anything - this will just be used in a classroom setting where there will be Beaglebones I'd like to boot up to a minimal console image.
I'll be doing this with the denzil release.
Thanks,
Scott
Signature · 3 lines
Scott Garman Embedded Linux Engineer - Yocto Project Intel Open Source Technology Center
Hey Scott,
I am doing the same thing for a Linux Foundation class.
The root filesystem that YP builds for the BBoard works just fine for the BBone. That's at least true for core-image-minimal. I tested that with the kernel that comes with the BBone.
The kernel does not work. The BBoard has an OMAP3 CPU the BBoard has an AM3359 CPU.
I built a kernel with YP from kernel.org some patches and a defconfig. My goal is to use linux-yocto so I started from scratch and did not use meta-ti. And it's educational too.
I still used MLO and UBoot that came with the BBone. My next steps are to build the kernel using linux-yocto and then eventually also building UBoot with YP.
I can give more info but right now I am just typing this on a mobile with no access to my dev box. I will follow up.
Cheers,
Rudi
Quoted 23 lines · Scott Garman
Hello,
Am I correct in understanding that the TI Beagleboard BSP from yoctoproject.org should work with the Beaglebone, or do I need meta-ti? I'm not looking for accelerated graphics or anything - this will just be used in a classroom setting where there will be Beaglebones I'd like to boot up to a minimal console image.
I'll be doing this with the denzil release.
Thanks,
Scott
--
Scott Garman
Embedded Linux Engineer - Yocto Project
Intel Open Source Technology Center
______________________________**_________________
yocto mailing list
[email protected]
https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto>
Typo correction: the BBone has an AM3359 CPU.
Quoted 50 lines · Rudolf Streif
Hey Scott,
I am doing the same thing for a Linux Foundation class.
The root filesystem that YP builds for the BBoard works just fine for the BBone. That's at least true for core-image-minimal. I tested that with the kernel that comes with the BBone.
The kernel does not work. The BBoard has an OMAP3 CPU the BBoard has an AM3359 CPU.
I built a kernel with YP from kernel.org some patches and a defconfig. My goal is to use linux-yocto so I started from scratch and did not use meta-ti. And it's educational too.
I still used MLO and UBoot that came with the BBone. My next steps are to build the kernel using linux-yocto and then eventually also building UBoot with YP.
I can give more info but right now I am just typing this on a mobile with no access to my dev box. I will follow up.
Cheers,
RudiQuoted 23 lines · Scott Garman
Hello,
Am I correct in understanding that the TI Beagleboard BSP from yoctoproject.org should work with the Beaglebone, or do I need meta-ti? I'm not looking for accelerated graphics or anything - this will just be used in a classroom setting where there will be Beaglebones I'd like to boot up to a minimal console image.
I'll be doing this with the denzil release.
Thanks,
Scott
--
Scott Garman
Embedded Linux Engineer - Yocto Project
Intel Open Source Technology Center
______________________________**_________________
yocto mailing list
[email protected]
https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto>
Quoted 11 lines · Rudolf Streif
Hey Scott,
I am doing the same thing for a Linux Foundation class.
The root filesystem that YP builds for the BBoard works just fine for the BBone. That's at least true for core-image-minimal. I tested that with the kernel that comes with the BBone.
The kernel does not work. The BBoard has an OMAP3 CPU the BBoard has an AM3359 CPU.
Quoted 7 lines
I built a kernel with YP from kernel.org some patches and a defconfig. My goal is to use linux-yocto so I started from scratch and did not use meta-ti. And it's educational too.
I still used MLO and UBoot that came with the BBone. My next steps are to build the kernel using linux-yocto and then eventually also building UBoot with YP.
you need to add the right .config and may be patches. But there are lot of patches see meta-ti for more details.
Quoted 38 lines
I can give more info but right now I am just typing this on a mobile with no access to my dev box. I will follow up.
Cheers,
RudiQuoted 15 lines · Scott Garman
Hello,
Am I correct in understanding that the TI Beagleboard BSP from yoctoproject.org should work with the Beaglebone, or do I need meta-ti? I'm not looking for accelerated graphics or anything - this will just be used in a classroom setting where there will be Beaglebones I'd like to boot up to a minimal console image.
I'll be doing this with the denzil release.
Thanks,
Scott
Quoted 8 lines
--
Scott Garman
Embedded Linux Engineer - Yocto Project
Intel Open Source Technology Center
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Yes, there were a lot of patches that I applied to the upstream kernel. It worked but I do not think that they are all required. That's what I am currently trying to figure out.
Quoted 71 lines · Khem Raj
Quoted 6 lines · Rudolf Streif
Hey Scott,
I am doing the same thing for a Linux Foundation class.
The root filesystem that YP builds for the BBoard works just fine for the BBone. That's at least true for core-image-minimal. I tested that with
the
Quoted 6 lines
kernel that comes with the BBone.
The kernel does not work. The BBoard has an OMAP3 CPU the BBoard has an AM3359 CPU.
I built a kernel with YP from kernel.org some patches and a defconfig.
My
Quoted 5 lines
goal is to use linux-yocto so I started from scratch and did not use meta-ti. And it's educational too.
I still used MLO and UBoot that came with the BBone. My next steps are to build the kernel using linux-yocto and then eventually also building
UBoot
Quoted 1 line
with YP.
you need to add the right .config and may be patches. But there are lot of patches see meta-ti for more details.
Quoted 2 lines
I can give more info but right now I am just typing this on a mobile
with no
Quoted 6 lines
access to my dev box. I will follow up.
Cheers,
RudiOn Aug 31, 2012 4:11 PM, "Scott Garman" <[email protected]>
Quoted 5 lines · wrote:
Quoted 5 lines
Hello,
Am I correct in understanding that the TI Beagleboard BSP from yoctoproject.org should work with the Beaglebone, or do I need
meta-ti? I'm
Quoted 1 line
Quoted 1 line
not looking for accelerated graphics or anything - this will just be
used in
Quoted 1 line
Quoted 1 line
a classroom setting where there will be Beaglebones I'd like to boot up
to a
Quoted 23 lines
Quoted 8 lines
minimal console image.
I'll be doing this with the denzil release.
Thanks,
Scott
Quoted 8 lines
--
Scott Garman
Embedded Linux Engineer - Yocto Project
Intel Open Source Technology Center
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Quoted 3 lines · Rudolf Streif
Yes, there were a lot of patches that I applied to the upstream kernel. It worked but I do not think that they are all required. That's what I am currently trying to figure out.
Sounds interesting!
Do plan to share your efforts in a layer somewhere?
Cheers,
Anders
Quoted 75 lines · Khem Raj
On Fri, Aug 31, 2012 at 6:44 PM, Rudolf Streif <[email protected]> wrote:
> Hey Scott,
>
> I am doing the same thing for a Linux Foundation class.
>
> The root filesystem that YP builds for the BBoard works just fine for the > BBone. That's at least true for core-image-minimal. I tested that with the
> kernel that comes with the BBone.
>
> The kernel does not work. The BBoard has an OMAP3 CPU the BBoard has an > AM3359 CPU.
>
> I built a kernel with YP from kernel.org some patches and a defconfig. My > goal is to use linux-yocto so I started from scratch and did not use > meta-ti. And it's educational too.
>
> I still used MLO and UBoot that came with the BBone. My next steps are to > build the kernel using linux-yocto and then eventually also building UBoot
> with YP.you need to add the right .config and may be patches. But there are lot of patches see meta-ti for more details.
>
> I can give more info but right now I am just typing this on a mobile with no
> access to my dev box. I will follow up.
>
> Cheers,
> Rudi
>
> On Aug 31, 2012 4:11 PM, "Scott Garman" <[email protected]> wrote:
>>
>> Hello,
>>
>> Am I correct in understanding that the TI Beagleboard BSP from >> yoctoproject.org should work with the Beaglebone, or do I need meta-ti? I'm
>> not looking for accelerated graphics or anything - this will just be used in
>> a classroom setting where there will be Beaglebones I'd like to boot up to a
>> minimal console image.
>>
>> I'll be doing this with the denzil release.
>>
>> Thanks,
>>
>> Scott
>>
>> --
>> Scott Garman
>> Embedded Linux Engineer - Yocto Project
>> Intel Open Source Technology Center
>> _______________________________________________
>> yocto mailing list
>> [email protected]
>> https://lists.yoctoproject.org/listinfo/yocto
>
>
> _______________________________________________
> yocto mailing list
> [email protected]
> https://lists.yoctoproject.org/listinfo/yocto
>_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Signature · 2 lines
Anders Darander ChargeStorm AB / eStorm AB
Yes, I will share it once I got it working. It's not that much a function of if and how but more of when. My time during the next couple of weeks will be mostly consumed by the Linux Foundation's Automotive Linux Summit.
Cheers,
Rudi
Quoted 112 lines · Anders Darander
Quoted 1 line · Rudolf Streif
Yes, there were a lot of patches that I applied to the upstream kernel.
It
Quoted 2 lines
worked but I do not think that they are all required. That's what I am currently trying to figure out.
Sounds interesting!
Do plan to share your efforts in a layer somewhere?
Cheers,
AndersQuoted 9 lines · Khem Raj
On Fri, Aug 31, 2012 at 6:44 PM, Rudolf Streif <[email protected]> wrote:
> Hey Scott,
>
> I am doing the same thing for a Linux Foundation class. >
> The root filesystem that YP builds for the BBoard works just finefor the
Quoted 1 line
Quoted 1 line
BBone. That's at least true for core-image-minimal. I tested that
with
Quoted 4 lines
the
> kernel that comes with the BBone.
>
> The kernel does not work. The BBoard has an OMAP3 CPU the BBoardhas an
Quoted 3 lines
Quoted 3 lines
AM3359 CPU.
I built a kernel with YP from kernel.org some patches and a
defconfig. My
Quoted 1 line
Quoted 1 line
goal is to use linux-yocto so I started from scratch and did not
use
Quoted 3 lines
Quoted 3 lines
meta-ti. And it's educational too.
I still used MLO and UBoot that came with the BBone. My next steps
are to
Quoted 1 line
Quoted 1 line
build the kernel using linux-yocto and then eventually also
building
Quoted 4 lines
UBoot
> with YP.you need to add the right .config and may be patches. But there are
lot
Quoted 4 lines
of patches see meta-ti for more details.
>
> I can give more info but right now I am just typing this on amobile with
Quoted 7 lines
no > access to my dev box. I will follow up. > > Cheers, > Rudi > > On Aug 31, 2012 4:11 PM, "Scott Garman" <[email protected]>Quoted 5 lines · wrote:
Quoted 5 lines
Quoted 5 lines
Hello,
Am I correct in understanding that the TI Beagleboard BSP from yoctoproject.org should work with the Beaglebone, or do I need
meta-ti?
Quoted 2 lines
I'm
>> not looking for accelerated graphics or anything - this will justbe
Quoted 2 lines
used in
>> a classroom setting where there will be Beaglebones I'd like toboot up
Quoted 25 lines
to a >> minimal console image. >> >> I'll be doing this with the denzil release. >> >> Thanks, >> >> Scott >> >> -- >> Scott Garman >> Embedded Linux Engineer - Yocto Project >> Intel Open Source Technology Center >> _______________________________________________ >> yocto mailing list >> [email protected] >> https://lists.yoctoproject.org/listinfo/yocto > > > _______________________________________________ > yocto mailing list > [email protected] > https://lists.yoctoproject.org/listinfo/yocto >Quoted 4 lines
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto--
Anders Darander
ChargeStorm AB / eStorm AB
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto