Skip to contentSkip to conversation

Beaglebone BSP for denzil?

DISCUSSION Scott Garman 5 participants 7 messages Aug 31, 2012 – Sep 3, 2012

lore
Share & tools
lore
#0 lore raw

Hello,

Am I correct in understanding that the TI Beagleboard BSP from yoctoproject.org should work with the Beaglebone, or do I need meta-ti? I'm not looking for accelerated graphics or anything - this will just be used in a classroom setting where there will be Beaglebones I'd like to boot up to a minimal console image.

I'll be doing this with the denzil release.

Thanks,

Scott

Signature · 3 lines
Scott Garman
Embedded Linux Engineer - Yocto Project
Intel Open Source Technology Center
#1 lore raw

Hey Scott,

I am doing the same thing for a Linux Foundation class.

The root filesystem that YP builds for the BBoard works just fine for the BBone. That's at least true for core-image-minimal. I tested that with the kernel that comes with the BBone.

The kernel does not work. The BBoard has an OMAP3 CPU the BBoard has an AM3359 CPU.

I built a kernel with YP from kernel.org some patches and a defconfig. My goal is to use linux-yocto so I started from scratch and did not use meta-ti. And it's educational too.

I still used MLO and UBoot that came with the BBone. My next steps are to build the kernel using linux-yocto and then eventually also building UBoot with YP.

I can give more info but right now I am just typing this on a mobile with no access to my dev box. I will follow up.

Cheers,
Rudi

Quoted 23 lines · Scott Garman

Hello,

Am I correct in understanding that the TI Beagleboard BSP from yoctoproject.org should work with the Beaglebone, or do I need meta-ti? I'm not looking for accelerated graphics or anything - this will just be used in a classroom setting where there will be Beaglebones I'd like to boot up to a minimal console image.

I'll be doing this with the denzil release.

Thanks,

Scott

--
Scott Garman
Embedded Linux Engineer - Yocto Project
Intel Open Source Technology Center
______________________________**_________________
yocto mailing list
[email protected]
https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto>

#2 lore raw

Typo correction: the BBone has an AM3359 CPU.

Quoted 50 lines · Rudolf Streif

Hey Scott,

I am doing the same thing for a Linux Foundation class.

The root filesystem that YP builds for the BBoard works just fine for the BBone. That's at least true for core-image-minimal. I tested that with the kernel that comes with the BBone.

The kernel does not work. The BBoard has an OMAP3 CPU the BBoard has an AM3359 CPU.

I built a kernel with YP from kernel.org some patches and a defconfig. My goal is to use linux-yocto so I started from scratch and did not use meta-ti. And it's educational too.

I still used MLO and UBoot that came with the BBone. My next steps are to build the kernel using linux-yocto and then eventually also building UBoot with YP.

I can give more info but right now I am just typing this on a mobile with no access to my dev box. I will follow up.

Cheers,
Rudi

Quoted 23 lines · Scott Garman

Hello,

Am I correct in understanding that the TI Beagleboard BSP from yoctoproject.org should work with the Beaglebone, or do I need meta-ti? I'm not looking for accelerated graphics or anything - this will just be used in a classroom setting where there will be Beaglebones I'd like to boot up to a minimal console image.

I'll be doing this with the denzil release.

Thanks,

Scott

--
Scott Garman
Embedded Linux Engineer - Yocto Project
Intel Open Source Technology Center
______________________________**_________________
yocto mailing list
[email protected]
https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto>

#3 lore raw
In reply to Rudolf Streif
Quoted 11 lines · Rudolf Streif

Hey Scott,

I am doing the same thing for a Linux Foundation class.

The root filesystem that YP builds for the BBoard works just fine for the BBone. That's at least true for core-image-minimal. I tested that with the kernel that comes with the BBone.

The kernel does not work. The BBoard has an OMAP3 CPU the BBoard has an AM3359 CPU.

Quoted 7 lines

I built a kernel with YP from kernel.org some patches and a defconfig. My goal is to use linux-yocto so I started from scratch and did not use meta-ti. And it's educational too.

I still used MLO and UBoot that came with the BBone. My next steps are to build the kernel using linux-yocto and then eventually also building UBoot with YP.

you need to add the right .config and may be patches. But there are lot of patches see meta-ti for more details.

Quoted 38 lines

I can give more info but right now I am just typing this on a mobile with no access to my dev box. I will follow up.

Cheers,
Rudi

Quoted 15 lines · Scott Garman

Hello,

Am I correct in understanding that the TI Beagleboard BSP from yoctoproject.org should work with the Beaglebone, or do I need meta-ti? I'm not looking for accelerated graphics or anything - this will just be used in a classroom setting where there will be Beaglebones I'd like to boot up to a minimal console image.

I'll be doing this with the denzil release.

Thanks,

Scott

Quoted 8 lines

--
Scott Garman
Embedded Linux Engineer - Yocto Project
Intel Open Source Technology Center
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#4 lore raw

Yes, there were a lot of patches that I applied to the upstream kernel. It worked but I do not think that they are all required. That's what I am currently trying to figure out.

Quoted 71 lines · Khem Raj
Quoted 6 lines · Rudolf Streif

Hey Scott,

I am doing the same thing for a Linux Foundation class.

The root filesystem that YP builds for the BBoard works just fine for the BBone. That's at least true for core-image-minimal. I tested that with

the

Quoted 6 lines

kernel that comes with the BBone.

The kernel does not work. The BBoard has an OMAP3 CPU the BBoard has an AM3359 CPU.

I built a kernel with YP from kernel.org some patches and a defconfig.

My

Quoted 5 lines

goal is to use linux-yocto so I started from scratch and did not use meta-ti. And it's educational too.

I still used MLO and UBoot that came with the BBone. My next steps are to build the kernel using linux-yocto and then eventually also building

UBoot

Quoted 1 line

with YP.

you need to add the right .config and may be patches. But there are lot of patches see meta-ti for more details.

Quoted 2 lines

I can give more info but right now I am just typing this on a mobile

with no

Quoted 6 lines

access to my dev box. I will follow up.

Cheers,
Rudi

On Aug 31, 2012 4:11 PM, "Scott Garman" <[email protected]>

Quoted 5 lines · wrote:
Quoted 5 lines

Hello,

Am I correct in understanding that the TI Beagleboard BSP from yoctoproject.org should work with the Beaglebone, or do I need

meta-ti? I'm

Quoted 1 line
Quoted 1 line

not looking for accelerated graphics or anything - this will just be

used in

Quoted 1 line
Quoted 1 line

a classroom setting where there will be Beaglebones I'd like to boot up

to a

Quoted 23 lines
Quoted 8 lines

minimal console image.

I'll be doing this with the denzil release.

Thanks,

Scott

Quoted 8 lines

--
Scott Garman
Embedded Linux Engineer - Yocto Project
Intel Open Source Technology Center
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#5 lore raw
Quoted 3 lines · Rudolf Streif

Yes, there were a lot of patches that I applied to the upstream kernel. It worked but I do not think that they are all required. That's what I am currently trying to figure out.

Sounds interesting!

Do plan to share your efforts in a layer somewhere?

Cheers,
Anders

Quoted 75 lines · Khem Raj

On Fri, Aug 31, 2012 at 6:44 PM, Rudolf Streif <[email protected]> wrote:
> Hey Scott,
>
> I am doing the same thing for a Linux Foundation class.
>
> The root filesystem that YP builds for the BBoard works just fine for the > BBone. That's at least true for core-image-minimal. I tested that with the
> kernel that comes with the BBone.
>
> The kernel does not work. The BBoard has an OMAP3 CPU the BBoard has an > AM3359 CPU.
>
> I built a kernel with YP from kernel.org some patches and a defconfig. My > goal is to use linux-yocto so I started from scratch and did not use > meta-ti. And it's educational too.
>
> I still used MLO and UBoot that came with the BBone. My next steps are to > build the kernel using linux-yocto and then eventually also building UBoot
> with YP.

you need to add the right .config and may be patches. But there are lot of patches see meta-ti for more details.

>
> I can give more info but right now I am just typing this on a mobile with no
> access to my dev box. I will follow up.
>
> Cheers,
> Rudi
>
> On Aug 31, 2012 4:11 PM, "Scott Garman" <[email protected]> wrote:
>>
>> Hello,
>>
>> Am I correct in understanding that the TI Beagleboard BSP from >> yoctoproject.org should work with the Beaglebone, or do I need meta-ti? I'm
>> not looking for accelerated graphics or anything - this will just be used in
>> a classroom setting where there will be Beaglebones I'd like to boot up to a
>> minimal console image.
>>
>> I'll be doing this with the denzil release.
>>
>> Thanks,
>>
>> Scott
>>
>> --
>> Scott Garman
>> Embedded Linux Engineer - Yocto Project
>> Intel Open Source Technology Center
>> _______________________________________________
>> yocto mailing list
>> [email protected]
>> https://lists.yoctoproject.org/listinfo/yocto
>
>
> _______________________________________________
> yocto mailing list
> [email protected]
> https://lists.yoctoproject.org/listinfo/yocto
>

_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

Signature · 2 lines
Anders Darander
ChargeStorm AB / eStorm AB
#6 lore raw

Yes, I will share it once I got it working. It's not that much a function of if and how but more of when. My time during the next couple of weeks will be mostly consumed by the Linux Foundation's Automotive Linux Summit.

Cheers,
Rudi

Quoted 112 lines · Anders Darander
Quoted 1 line · Rudolf Streif

Yes, there were a lot of patches that I applied to the upstream kernel.

It

Quoted 2 lines

worked but I do not think that they are all required. That's what I am currently trying to figure out.

Sounds interesting!

Do plan to share your efforts in a layer somewhere?

Cheers,
Anders

Quoted 9 lines · Khem Raj

On Fri, Aug 31, 2012 at 6:44 PM, Rudolf Streif <[email protected]> wrote:
> Hey Scott,
>
> I am doing the same thing for a Linux Foundation class. >
> The root filesystem that YP builds for the BBoard works just fine

for the

Quoted 1 line
Quoted 1 line

BBone. That's at least true for core-image-minimal. I tested that

with

Quoted 4 lines

the
> kernel that comes with the BBone.
>
> The kernel does not work. The BBoard has an OMAP3 CPU the BBoard

has an

Quoted 3 lines
Quoted 3 lines

AM3359 CPU.

I built a kernel with YP from kernel.org some patches and a

defconfig. My

Quoted 1 line
Quoted 1 line

goal is to use linux-yocto so I started from scratch and did not

use

Quoted 3 lines
Quoted 3 lines

meta-ti. And it's educational too.

I still used MLO and UBoot that came with the BBone. My next steps

are to

Quoted 1 line
Quoted 1 line

build the kernel using linux-yocto and then eventually also

building

Quoted 4 lines

UBoot
> with YP.

you need to add the right .config and may be patches. But there are

lot

Quoted 4 lines

of patches see meta-ti for more details.

>
> I can give more info but right now I am just typing this on a

mobile with

Quoted 7 lines
    no
    > access to my dev box. I will follow up.
    >
    > Cheers,
    > Rudi
    >
    > On Aug 31, 2012 4:11 PM, "Scott Garman" <[email protected]>
Quoted 5 lines · wrote:
Quoted 5 lines
Quoted 5 lines

Hello,

Am I correct in understanding that the TI Beagleboard BSP from yoctoproject.org should work with the Beaglebone, or do I need

meta-ti?

Quoted 2 lines

I'm
>> not looking for accelerated graphics or anything - this will just

be

Quoted 2 lines

used in
>> a classroom setting where there will be Beaglebones I'd like to

boot up

Quoted 25 lines
    to a
    >> minimal console image.
    >>
    >> I'll be doing this with the denzil release.
    >>
    >> Thanks,
    >>
    >> Scott
    >>
    >> --
    >> Scott Garman
    >> Embedded Linux Engineer - Yocto Project
    >> Intel Open Source Technology Center
    >> _______________________________________________
    >> yocto mailing list
    >> [email protected]
    >> https://lists.yoctoproject.org/listinfo/yocto
    >
    >
    > _______________________________________________
    > yocto mailing list
    > [email protected]
    > https://lists.yoctoproject.org/listinfo/yocto
    >
Quoted 4 lines

_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

--
Anders Darander
ChargeStorm AB / eStorm AB
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto