pull request: bluetooth-next 2012-11-01
Hi John,
Another set of patches for integration in wireless-next. There are two big set of changes in it: Andrei Emeltchenko and Mat Martineau added more patches towards a full Bluetooth High Speed support and Johan Hedberg improve the single mode support for Bluetooth dongles. Apart from that we have small fixes and improvements.
Please pull. Thanks a lot.
Gustavo
---
The following changes since commit 9917c85b06c2eb9d61c0f2dadd2d5d8788f7e563:
brcm80211: remove some truely barftastic code (2012-10-19 16:20:56 -0400)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next for-upstream
for you to fetch changes up to 0c0afedf55ff409be9db0b0aeeaa1c6fe0f3cd3c:
Bluetooth: Fix parameter order of hci_get_route (2012-11-01 20:27:11 -0200)
----------------------------------------------------------------
Andrei Emeltchenko (18):
Bluetooth: trivial: Remove unneeded assignment
Bluetooth: Use helper function sending EFS conf rsp
Bluetooth: AMP: Process Physical Link Complete evt
Bluetooth: AMP: Process Logical Link complete evt
Bluetooth: Add put(hcon) when deleting hchan
Bluetooth: trivial: Fix braces style and remove empty line
Bluetooth: Save hs_hchan instead of hs_hcon in loglink complete
Bluetooth: Return correct L2CAP response type
Bluetooth: Derive remote and local amp id from chan struct
Bluetooth: AMP: Add Logical Link Create function
Bluetooth: AMP: Process Disc Logical Link
Bluetooth: AMP: Process Disc Physical Link Complete evt
Bluetooth: AMP: Remove hci_conn receiving error command status
Bluetooth: Disconnect logical link when deleting chan
Bluetooth: AMP: Check for hs_hcon instead of ctrl_id
Bluetooth: AMP: Use l2cap_physical_cfm in phylink complete evt
Bluetooth: Process Create Chan Request
Bluetooth: Rename ctrl_id to remote_amp_id
Denis Kirjanov (1):
Bluetooth:Replace list_for_each with list_for_each_entry() helper
Gustavo Padovan (1):
Bluetooth: Replace *_init() for *_setup()
Johan Hedberg (16):
Bluetooth: Add initial support for LE-only controllers
Bluetooth: Fix LE MTU reporting for HCIGETDEVINFO
Bluetooth: Add setting of the LE event mask
Bluetooth: Read adversiting channel TX power during init sequence
Bluetooth: Fix HCI command sending when powering on LE-only adapters
Bluetooth: mgmt: Restrict BR/EDR settings to BR/EDR-only adapters
Bluetooth: Fix updating host feature bits for LE
Bluetooth: Add missing feature test macros
Bluetooth: Make use feature test macros
Bluetooth: Add flag for LE GAP Peripheral role
Bluetooth: Disallow LE scanning and connecting in peripheral role
Bluetooth: Fix setting host feature bits for SSP
Bluetooth: Fix sending unnecessary HCI_Write_SSP_Mode command
Bluetooth: Fix unnecessary EIR update during powering on
Bluetooth: Fix sending unnecessary HCI_LE_Host_Enable
Bluetooth: Fix parameter order of hci_get_route
Mat Martineau (18):
Bluetooth: Add new l2cap_chan struct members for high speed channels
Bluetooth: Add L2CAP create channel request handling
Bluetooth: Remove unnecessary intermediate function
Bluetooth: Lookup channel structure based on DCID
Bluetooth: Channel move request handling
Bluetooth: Add new ERTM receive states for channel move
Bluetooth: Add move channel confirm handling
Bluetooth: Add state to hci_chan
Bluetooth: Move channel response
Bluetooth: Add logical link confirm
Bluetooth: Add move confirm response handling
Bluetooth: Handle physical link completion
Bluetooth: Flag ACL frames as complete for AMP controllers
Bluetooth: Do not send data during channel move
Bluetooth: Configure appropriate timeouts for AMP controllers
Bluetooth: Ignore BR/EDR packet size constraints when fragmenting for AMP
Bluetooth: Do not retransmit data during a channel move
Bluetooth: Start channel move when socket option is changed
Syam Sidhardhan (4):
Bluetooth: trivial: Remove newline before EOF
Bluetooth: Replace include linux/module.h with linux/export.h
Bluetooth: Remove unnecessary include export.h
Bluetooth: mgmt: Use __constant when dealing with constants
include/net/bluetooth/amp.h | 4 + include/net/bluetooth/hci.h | 7 + include/net/bluetooth/hci_core.h | 44 +- include/net/bluetooth/l2cap.h | 38 +- net/bluetooth/Kconfig | 1 - net/bluetooth/a2mp.c | 4 +- net/bluetooth/amp.c | 93 ++++ net/bluetooth/bnep/netdev.c | 1 - net/bluetooth/cmtp/capi.c | 2 +- net/bluetooth/cmtp/sock.c | 2 +- net/bluetooth/hci_conn.c | 6 + net/bluetooth/hci_core.c | 65 +-- net/bluetooth/hci_event.c | 309 +++++++++++-- net/bluetooth/l2cap_core.c | 1000 +++++++++++++++++++++++++++++++++++++--- net/bluetooth/l2cap_sock.c | 5 + net/bluetooth/mgmt.c | 98 ++-- 16 files changed, 1486 insertions(+), 193 deletions(-)
Quoted 13 lines · Gustavo Padovan
Hi John,
Another set of patches for integration in wireless-next. There are two big set of changes in it: Andrei Emeltchenko and Mat Martineau added more patches towards a full Bluetooth High Speed support and Johan Hedberg improve the single mode support for Bluetooth dongles. Apart from that we have small fixes and improvements.
Please pull. Thanks a lot.
Gustavo
---
Quoted 7 lines
The following changes since commit
9917c85b06c2eb9d61c0f2dadd2d5d8788f7e563:brcm80211: remove some truely barftastic code (2012-10-19 16:20:56 -0400)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-nextfor-upstream
Pulled...
Quoted 93 lines
for you to fetch changes up to
0c0afedf55ff409be9db0b0aeeaa1c6fe0f3cd3c:Bluetooth: Fix parameter order of
hci_get_route(2012-11-01 20:27:11 -0200)----------------------------------------------------------------
Andrei Emeltchenko (18):
Bluetooth: trivial: Remove unneeded assignment
Bluetooth: Use helper function sending EFS conf rsp
Bluetooth: AMP: Process Physical Link Complete evt
Bluetooth: AMP: Process Logical Link complete evt
Bluetooth: Add put(hcon) when deleting hchan
Bluetooth: trivial: Fix braces style and remove empty line
Bluetooth: Savehs_hchaninstead ofhs_hconin loglink complete
Bluetooth: Return correct L2CAP response type
Bluetooth: Derive remote and local amp id from chan struct
Bluetooth: AMP: Add Logical Link Create function
Bluetooth: AMP: Process Disc Logical Link
Bluetooth: AMP: Process Disc Physical Link Complete evt
Bluetooth: AMP: Removehci_connreceiving error command status
Bluetooth: Disconnect logical link when deleting chan
Bluetooth: AMP: Check forhs_hconinstead ofctrl_id
Bluetooth: AMP: Usel2cap_physical_cfmin phylink complete evt
Bluetooth: Process Create Chan Request
Bluetooth: Renamectrl_idtoremote_amp_idDenis Kirjanov (1):
Bluetooth:Replacelist_for_eachwithlist_for_each_entry()helperGustavo Padovan (1):
Bluetooth: Replace*_init()for*_setup()Johan Hedberg (16):
Bluetooth: Add initial support for LE-only controllers
Bluetooth: Fix LE MTU reporting for HCIGETDEVINFO
Bluetooth: Add setting of the LE event mask
Bluetooth: Read adversiting channel TX power during init sequence
Bluetooth: Fix HCI command sending when powering on LE-only adapters
Bluetooth: mgmt: Restrict BR/EDR settings to BR/EDR-only adapters
Bluetooth: Fix updating host feature bits for LE
Bluetooth: Add missing feature test macros
Bluetooth: Make use feature test macros
Bluetooth: Add flag for LE GAP Peripheral role
Bluetooth: Disallow LE scanning and connecting in peripheral role
Bluetooth: Fix setting host feature bits for SSP
Bluetooth: Fix sending unnecessaryHCI_Write_SSP_Modecommand
Bluetooth: Fix unnecessary EIR update during powering on
Bluetooth: Fix sending unnecessaryHCI_LE_Host_Enable
Bluetooth: Fix parameter order ofhci_get_routeMat Martineau (18):
Bluetooth: Add newl2cap_chanstruct members for high speed channels
Bluetooth: Add L2CAP create channel request handling
Bluetooth: Remove unnecessary intermediate function
Bluetooth: Lookup channel structure based on DCID
Bluetooth: Channel move request handling
Bluetooth: Add new ERTM receive states for channel move
Bluetooth: Add move channel confirm handling
Bluetooth: Add state tohci_chan
Bluetooth: Move channel response
Bluetooth: Add logical link confirm
Bluetooth: Add move confirm response handling
Bluetooth: Handle physical link completion
Bluetooth: Flag ACL frames as complete for AMP controllers
Bluetooth: Do not send data during channel move
Bluetooth: Configure appropriate timeouts for AMP controllers
Bluetooth: Ignore BR/EDR packet size constraints when fragmenting for AMP
Bluetooth: Do not retransmit data during a channel move
Bluetooth: Start channel move when socket option is changedSyam Sidhardhan (4):
Bluetooth: trivial: Remove newline before EOF
Bluetooth: Replace includelinux/module.hwithlinux/export.h
Bluetooth: Remove unnecessary includeexport.h
Bluetooth: mgmt: Use__constantwhen dealing with constantsinclude/net/bluetooth/amp.h | 4 + include/net/bluetooth/hci.h | 7 + include/net/bluetooth/hci_core.h | 44 +- include/net/bluetooth/l2cap.h | 38 +- net/bluetooth/Kconfig | 1 - net/bluetooth/a2mp.c | 4 +- net/bluetooth/amp.c | 93 ++++ net/bluetooth/bnep/netdev.c | 1 - net/bluetooth/cmtp/capi.c | 2 +- net/bluetooth/cmtp/sock.c | 2 +- net/bluetooth/hci_conn.c | 6 + net/bluetooth/hci_core.c | 65 +-- net/bluetooth/hci_event.c | 309 +++++++++++-- net/bluetooth/l2cap_core.c | 1000 +++++++++++++++++++++++++++++++++++++--- net/bluetooth/l2cap_sock.c | 5 + net/bluetooth/mgmt.c | 98 ++-- 16 files changed, 1486 insertions(+), 193 deletions(-)
Signature · 2 lines
John W. Linville Someday the world will need a hero, and you [email protected] might be all we have. Be ready.