Skip to contentSkip to conversation

pull request: bluetooth-next 2012-11-01

DISCUSSION Gustavo Padovan 2 participants 2 messages Nov 1, 2012 – Nov 14, 2012 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

Hi John,

Another set of patches for integration in wireless-next. There are two big set of changes in it: Andrei Emeltchenko and Mat Martineau added more patches towards a full Bluetooth High Speed support and Johan Hedberg improve the single mode support for Bluetooth dongles. Apart from that we have small fixes and improvements.

Please pull. Thanks a lot.

Gustavo
---

The following changes since commit 9917c85b06c2eb9d61c0f2dadd2d5d8788f7e563:

brcm80211: remove some truely barftastic code (2012-10-19 16:20:56 -0400)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next for-upstream

for you to fetch changes up to 0c0afedf55ff409be9db0b0aeeaa1c6fe0f3cd3c:

Bluetooth: Fix parameter order of hci_get_route (2012-11-01 20:27:11 -0200)

----------------------------------------------------------------
Andrei Emeltchenko (18):
Bluetooth: trivial: Remove unneeded assignment
Bluetooth: Use helper function sending EFS conf rsp
Bluetooth: AMP: Process Physical Link Complete evt
Bluetooth: AMP: Process Logical Link complete evt
Bluetooth: Add put(hcon) when deleting hchan
Bluetooth: trivial: Fix braces style and remove empty line
Bluetooth: Save hs_hchan instead of hs_hcon in loglink complete
Bluetooth: Return correct L2CAP response type
Bluetooth: Derive remote and local amp id from chan struct
Bluetooth: AMP: Add Logical Link Create function
Bluetooth: AMP: Process Disc Logical Link
Bluetooth: AMP: Process Disc Physical Link Complete evt
Bluetooth: AMP: Remove hci_conn receiving error command status
Bluetooth: Disconnect logical link when deleting chan
Bluetooth: AMP: Check for hs_hcon instead of ctrl_id
Bluetooth: AMP: Use l2cap_physical_cfm in phylink complete evt
Bluetooth: Process Create Chan Request
Bluetooth: Rename ctrl_id to remote_amp_id

Denis Kirjanov (1):
Bluetooth:Replace list_for_each with list_for_each_entry() helper

Gustavo Padovan (1):
Bluetooth: Replace *_init() for *_setup()

Johan Hedberg (16):
Bluetooth: Add initial support for LE-only controllers
Bluetooth: Fix LE MTU reporting for HCIGETDEVINFO
Bluetooth: Add setting of the LE event mask
Bluetooth: Read adversiting channel TX power during init sequence
Bluetooth: Fix HCI command sending when powering on LE-only adapters
Bluetooth: mgmt: Restrict BR/EDR settings to BR/EDR-only adapters
Bluetooth: Fix updating host feature bits for LE
Bluetooth: Add missing feature test macros
Bluetooth: Make use feature test macros
Bluetooth: Add flag for LE GAP Peripheral role
Bluetooth: Disallow LE scanning and connecting in peripheral role
Bluetooth: Fix setting host feature bits for SSP
Bluetooth: Fix sending unnecessary HCI_Write_SSP_Mode command
Bluetooth: Fix unnecessary EIR update during powering on
Bluetooth: Fix sending unnecessary HCI_LE_Host_Enable
Bluetooth: Fix parameter order of hci_get_route

Mat Martineau (18):
Bluetooth: Add new l2cap_chan struct members for high speed channels
Bluetooth: Add L2CAP create channel request handling
Bluetooth: Remove unnecessary intermediate function
Bluetooth: Lookup channel structure based on DCID
Bluetooth: Channel move request handling
Bluetooth: Add new ERTM receive states for channel move
Bluetooth: Add move channel confirm handling
Bluetooth: Add state to hci_chan
Bluetooth: Move channel response
Bluetooth: Add logical link confirm
Bluetooth: Add move confirm response handling
Bluetooth: Handle physical link completion
Bluetooth: Flag ACL frames as complete for AMP controllers
Bluetooth: Do not send data during channel move
Bluetooth: Configure appropriate timeouts for AMP controllers
Bluetooth: Ignore BR/EDR packet size constraints when fragmenting for AMP
Bluetooth: Do not retransmit data during a channel move
Bluetooth: Start channel move when socket option is changed

Syam Sidhardhan (4):
Bluetooth: trivial: Remove newline before EOF
Bluetooth: Replace include linux/module.h with linux/export.h
Bluetooth: Remove unnecessary include export.h
Bluetooth: mgmt: Use __constant when dealing with constants

 include/net/bluetooth/amp.h      |    4 +
 include/net/bluetooth/hci.h      |    7 +
 include/net/bluetooth/hci_core.h |   44 +-
 include/net/bluetooth/l2cap.h    |   38 +-
 net/bluetooth/Kconfig            |    1 -
 net/bluetooth/a2mp.c             |    4 +-
 net/bluetooth/amp.c              |   93 ++++
 net/bluetooth/bnep/netdev.c      |    1 -
 net/bluetooth/cmtp/capi.c        |    2 +-
 net/bluetooth/cmtp/sock.c        |    2 +-
 net/bluetooth/hci_conn.c         |    6 +
 net/bluetooth/hci_core.c         |   65 +--
 net/bluetooth/hci_event.c        |  309 +++++++++++--
 net/bluetooth/l2cap_core.c       | 1000 +++++++++++++++++++++++++++++++++++++---
 net/bluetooth/l2cap_sock.c       |    5 +
 net/bluetooth/mgmt.c             |   98 ++--
 16 files changed, 1486 insertions(+), 193 deletions(-)
#1 lore raw
Quoted 13 lines · Gustavo Padovan

Hi John,

Another set of patches for integration in wireless-next. There are two big set of changes in it: Andrei Emeltchenko and Mat Martineau added more patches towards a full Bluetooth High Speed support and Johan Hedberg improve the single mode support for Bluetooth dongles. Apart from that we have small fixes and improvements.

Please pull. Thanks a lot.

Gustavo
---

Quoted 7 lines

The following changes since commit 9917c85b06c2eb9d61c0f2dadd2d5d8788f7e563:

brcm80211: remove some truely barftastic code (2012-10-19 16:20:56 -0400)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next for-upstream

Pulled...

Quoted 93 lines

for you to fetch changes up to 0c0afedf55ff409be9db0b0aeeaa1c6fe0f3cd3c:

Bluetooth: Fix parameter order of hci_get_route (2012-11-01 20:27:11 -0200)

----------------------------------------------------------------
Andrei Emeltchenko (18):
Bluetooth: trivial: Remove unneeded assignment
Bluetooth: Use helper function sending EFS conf rsp
Bluetooth: AMP: Process Physical Link Complete evt
Bluetooth: AMP: Process Logical Link complete evt
Bluetooth: Add put(hcon) when deleting hchan
Bluetooth: trivial: Fix braces style and remove empty line
Bluetooth: Save hs_hchan instead of hs_hcon in loglink complete
Bluetooth: Return correct L2CAP response type
Bluetooth: Derive remote and local amp id from chan struct
Bluetooth: AMP: Add Logical Link Create function
Bluetooth: AMP: Process Disc Logical Link
Bluetooth: AMP: Process Disc Physical Link Complete evt
Bluetooth: AMP: Remove hci_conn receiving error command status
Bluetooth: Disconnect logical link when deleting chan
Bluetooth: AMP: Check for hs_hcon instead of ctrl_id
Bluetooth: AMP: Use l2cap_physical_cfm in phylink complete evt
Bluetooth: Process Create Chan Request
Bluetooth: Rename ctrl_id to remote_amp_id

Denis Kirjanov (1):
Bluetooth:Replace list_for_each with list_for_each_entry() helper

Gustavo Padovan (1):
Bluetooth: Replace *_init() for *_setup()

Johan Hedberg (16):
Bluetooth: Add initial support for LE-only controllers
Bluetooth: Fix LE MTU reporting for HCIGETDEVINFO
Bluetooth: Add setting of the LE event mask
Bluetooth: Read adversiting channel TX power during init sequence
Bluetooth: Fix HCI command sending when powering on LE-only adapters
Bluetooth: mgmt: Restrict BR/EDR settings to BR/EDR-only adapters
Bluetooth: Fix updating host feature bits for LE
Bluetooth: Add missing feature test macros
Bluetooth: Make use feature test macros
Bluetooth: Add flag for LE GAP Peripheral role
Bluetooth: Disallow LE scanning and connecting in peripheral role
Bluetooth: Fix setting host feature bits for SSP
Bluetooth: Fix sending unnecessary HCI_Write_SSP_Mode command
Bluetooth: Fix unnecessary EIR update during powering on
Bluetooth: Fix sending unnecessary HCI_LE_Host_Enable
Bluetooth: Fix parameter order of hci_get_route

Mat Martineau (18):
Bluetooth: Add new l2cap_chan struct members for high speed channels
Bluetooth: Add L2CAP create channel request handling
Bluetooth: Remove unnecessary intermediate function
Bluetooth: Lookup channel structure based on DCID
Bluetooth: Channel move request handling
Bluetooth: Add new ERTM receive states for channel move
Bluetooth: Add move channel confirm handling
Bluetooth: Add state to hci_chan
Bluetooth: Move channel response
Bluetooth: Add logical link confirm
Bluetooth: Add move confirm response handling
Bluetooth: Handle physical link completion
Bluetooth: Flag ACL frames as complete for AMP controllers
Bluetooth: Do not send data during channel move
Bluetooth: Configure appropriate timeouts for AMP controllers
Bluetooth: Ignore BR/EDR packet size constraints when fragmenting for AMP
Bluetooth: Do not retransmit data during a channel move
Bluetooth: Start channel move when socket option is changed

Syam Sidhardhan (4):
Bluetooth: trivial: Remove newline before EOF
Bluetooth: Replace include linux/module.h with linux/export.h
Bluetooth: Remove unnecessary include export.h
Bluetooth: mgmt: Use __constant when dealing with constants

 include/net/bluetooth/amp.h      |    4 +
 include/net/bluetooth/hci.h      |    7 +
 include/net/bluetooth/hci_core.h |   44 +-
 include/net/bluetooth/l2cap.h    |   38 +-
 net/bluetooth/Kconfig            |    1 -
 net/bluetooth/a2mp.c             |    4 +-
 net/bluetooth/amp.c              |   93 ++++
 net/bluetooth/bnep/netdev.c      |    1 -
 net/bluetooth/cmtp/capi.c        |    2 +-
 net/bluetooth/cmtp/sock.c        |    2 +-
 net/bluetooth/hci_conn.c         |    6 +
 net/bluetooth/hci_core.c         |   65 +--
 net/bluetooth/hci_event.c        |  309 +++++++++++--
 net/bluetooth/l2cap_core.c       | 1000 +++++++++++++++++++++++++++++++++++++---
 net/bluetooth/l2cap_sock.c       |    5 +
 net/bluetooth/mgmt.c             |   98 ++--
 16 files changed, 1486 insertions(+), 193 deletions(-)
Signature · 2 lines
John W. Linville		Someday the world will need a hero, and you
[email protected]			might be all we have.  Be ready.