rtc: i.MX dryice: Add devicetree support
Subsystems (3)
Sascha Hauer
maintainerPATCH RESEND 1/1 rtc: i.MX dryice: Add devicetree support
Add devicetree probing, fixing some whitespace damage along the way.
---
Just a resend with Andrew Morton on Cc since I got no reaction from the RTC Maintainer.
Documentation/devicetree/bindings/rtc/imx-di.txt | 19 +++++++++++++++++++ drivers/rtc/rtc-imxdi.c | 12 +++++++++--- 2 files changed, 28 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/rtc/imx-di.txt
Documentation/devicetree/bindings/rtc/imx-di.txt new file +19 -0
@@ -0,0 +1,19 @@ +* i.MX25 dryice Real Time Clock controller + +This RTC is part of the i.MX25 dryice module. Documentation for this +unit is not publically available. This binding only makes use of the +RTC. + +Required properties: +- compatible: should be "fsl,imx25-rtc" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: interrupt source for the dryice module + +Example: + + dryice at 53ffc000 { + compatible = "fsl,imx25-dryice", "fsl,imx25-rtc"; + reg = <0x53ffc000 0x4000>; + interrupts = <25>; + };
drivers/rtc/rtc-imxdi.c +9 -3
@@ -493,11 +493,17 @@ static int __devexit dryice_rtc_remove(struct platform_device *pdev)return 0 ; } +static const struct of_device_id of_dryice_rtc_match[] = { + { .compatible ="fsl,imx25-rtc" , }, + { }, +}; +static struct platform_driver dryice_rtc_driver = { .driver = { - .name ="imxdi_rtc" , - .owner =THIS_MODULE , - }, + .name ="imxdi_rtc" , + .owner =THIS_MODULE , + .of_match_table = of_dryice_rtc_match, + }, .remove =__devexit_p (dryice_rtc_remove), };
Signature · 1 line
1.7.10.4
PATCH RESEND 1/1 rtc: i.MX dryice: Add devicetree support
Quoted 3 lines · Sascha Hauer
Add devicetree probing, fixing some whitespace damage along the way.
Signed-off-by Sascha Hauer <[email protected]>
Quoted 63 lines
---
Just a resend with Andrew Morton on Cc since I got no reaction from the RTC Maintainer.
Documentation/devicetree/bindings/rtc/imx-di.txt | 19 +++++++++++++++++++ drivers/rtc/rtc-imxdi.c | 12 +++++++++--- 2 files changed, 28 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/rtc/imx-di.txtDocumentation/devicetree/bindings/rtc/imx-di.txt new file +19
-0@@ -0,0 +1,19 @@ +* i.MX25 dryice Real Time Clock controller + +This RTC is part of the i.MX25 dryice module. Documentation for this +unit is not publically available. This binding only makes use of the +RTC. + +Required properties: +- compatible: should be "fsl,imx25-rtc" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: interrupt source for the dryice module + +Example: + + dryice at 53ffc000 { + compatible = "fsl,imx25-dryice", "fsl,imx25-rtc"; + reg = <0x53ffc000 0x4000>; + interrupts = <25>; + };drivers/rtc/rtc-imxdi.c +9
-3@@ -493,11 +493,17 @@ static int __devexit dryice_rtc_remove(struct platform_device *pdev)return 0 ; } +static const struct of_device_id of_dryice_rtc_match[] = { + { .compatible ="fsl,imx25-rtc" , }, + { }, +}; +static struct platform_driver dryice_rtc_driver = { .driver = { - .name ="imxdi_rtc" , - .owner =THIS_MODULE , - }, + .name ="imxdi_rtc" , + .owner =THIS_MODULE , + .of_match_table = of_dryice_rtc_match, + }, .remove =__devexit_p (dryice_rtc_remove), };Signature · 1 line
1.7.10.4
PATCH RESEND 1/1 rtc: i.MX dryice: Add devicetree support
In reply to Sascha HauerQuoted 2 lines · On Mon, 12 Nov 2012 09:42:50 +0100 Sascha Hauer <[email protected]> wrote:
Add devicetree probing, fixing some whitespace damage along the way.
I've already merged the below. It has better code but a little less documentation:
From: Roland Stigge <[email protected]>
Subject: drivers/rtc/rtc-imxdi.c: add devicetree support
Add device tree support to the rtc-imxdi driver.
---
Documentation/devicetree/bindings/rtc/imxdi-rtc.txt | 17 ++++++++++ drivers/rtc/rtc-imxdi.c | 11 ++++++ 2 files changed, 28 insertions(+)
Documentation/devicetree/bindings/rtc/imxdi-rtc.txt new file +17 -0
@@ -0,0 +1,17 @@ +* i.MX25 Real Time Clock controller + +This binding supports the following chips: i.MX25, i.MX53 + +Required properties: +- compatible: should be: "fsl,imx25-rtc" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: rtc alarm interrupt + +Example: + +rtc at 80056000 { + compatible = "fsl,imx53-rtc", "fsl,imx25-rtc"; + reg = <0x80056000 2000>; + interrupts = <29>; +};
drivers/rtc/rtc-imxdi.c renamed from drivers/rtc/rtc-imxdi.c~rtc-imxdi-add-devicetree-support +11 -0
@@ -37,6 +37,7 @@#include <linux/rtc.h> #include <linux/sched.h> #include <linux/workqueue.h> +#include <linux/of.h> /* DryIce Register Definitions */
@@ -495,10 +496,20 @@ static int __devexit dryice_rtc_remove(sreturn 0 ; } +#ifdef CONFIG_OF +static const struct of_device_id dryice_dt_ids[] = { + { .compatible ="fsl,imx25-rtc" }, + {/* sentinel */ } +}; + +MODULE_DEVICE_TABLE (of, dryice_dt_ids); +#endif +static struct platform_driver dryice_rtc_driver = { .driver = { .name ="imxdi_rtc" , .owner =THIS_MODULE , + .of_match_table =of_match_ptr (dryice_dt_ids), }, .remove =__devexit_p (dryice_rtc_remove), };
_
Sascha Hauer
maintainerPATCH RESEND 1/1 rtc: i.MX dryice: Add devicetree support
Quoted 8 lines · Andrew Morton
Quoted 2 lines · On Mon, 12 Nov 2012 09:42:50 +0100 Sascha Hauer <[email protected]> wrote:
Add devicetree probing, fixing some whitespace damage along the way.
I've already merged the below. It has better code but a little less documentation:
Oops, missed that. Too many RTCs...
Sorry for the noise.
Sascha
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |