at91sam9x5ek: add spi and mci support
v3 cover at91sam9x5ek: add spi and mci support
HI,
v3: rebase on the v3 of at91sam9xek i2c support
with this +1 patch serie the support of the at91sam9x5ek is mostly complete
This will add spi and mci0 support as spi0 and mci0 conflict
We are still missing framebuffer, usb host and device and hardware i2c support but this wil be added later
This patch serie depedsn on the at91sam9x5ek i2c and m25p80 patcheries
the correct version
this one work but brake the etherent as it mux the 4 cs as gpio and we use them on the eth0
The following changes since commit b3a0963d358e14180e9bbde68ab78fdebae071b7:
m25p80: sync flash support with the kernel (2012-11-03 04:23:15 +0800)
are available in the git repository at:
git://git.jcrosoft.org/barebox.git delivery/at91sam9x5ek_mci_spi
for you to fetch changes up to dc7e1ce2a4ca879d07ba5786cfaa84f54d2ee763:
at91sam9x5ek: add mci support (2012-11-03 04:23:48 +0800)
----------------------------------------------------------------
Jean-Christophe PLAGNIOL-VILLARD (4):
at91sam9x5: add spi support
at91sam9x5ek: add spi support
at91sam9x5: add mci support
at91sam9x5ek: add mci support
arch/arm/boards/at91sam9x5ek/init.c | 57 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/configs/at91sam9x5ek_defconfig | 10 +++++++--- arch/arm/mach-at91/at91sam9x5.c | 4 ++++ arch/arm/mach-at91/at91sam9x5_devices.c | 124 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 192 insertions(+), 3 deletions(-)
Best Regards,
J.
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
PATCH v3 1/4 at91sam9x5: add spi support
--- arch/arm/mach-at91/at91sam9x5.c | 2 + arch/arm/mach-at91/at91sam9x5_devices.c | 62 +++++++++++++++++++++++++++++++ 2 files changed, 64 insertions(+)
arch/arm/mach-at91/at91sam9x5.c +2 -0
@@ -205,6 +205,8 @@ static struct clk_lookup periph_clocks_lookups[] = {CLKDEV_CON_DEV_ID ("macb_clk" ,"macb0" , &macb0_clk),CLKDEV_CON_DEV_ID ("macb_clk" ,"macb1" , &macb1_clk),CLKDEV_CON_ID ("ohci_clk" , &uhphs_clk), +CLKDEV_CON_DEV_ID ("spi_clk" ,"atmel_spi0" , &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi1", &spi1_clk), }; static struct clk_lookup usart_clocks_lookups[] = {
arch/arm/mach-at91/at91sam9x5_devices.c +62 -0
68 lines not on this page · raw message
Signature · 7 lines
1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH v3 2/4 at91sam9x5ek: add spi support
on all the cpu module we have a at25 except on the cogent where we have a at45
--- arch/arm/boards/at91sam9x5ek/init.c | 37 +++++++++++++++++++++++++++++++ arch/arm/configs/at91sam9x5ek_defconfig | 5 ++++- 2 files changed, 41 insertions(+), 1 deletion(-)
arch/arm/boards/at91sam9x5ek/init.c +37 -0
@@ -41,6 +41,7 @@#include <readkey.h> #include <linux/w1-gpio.h> #include <w1_mac_address.h> +#include <spi/spi.h> #include "hw_version.h"
@@ -132,6 +133,41 @@ static void ek_add_device_i2c(void)at91_add_device_i2c (0 , i2c_devices,ARRAY_SIZE (i2c_devices)); } +static const struct spi_board_info ek_cm_cogent_spi_devices[] = { + { + .name ="mtd_dataflash" , + .chip_select =0 , + .max_speed_hz =15 *1000 *1000 , + .bus_num =0 , + } +}; + +static const struct spi_board_info ek_spi_devices[] = { + { + .name ="m25p80" , + .chip_select =0 , + .max_speed_hz =30 *1000 *1000 , + .bus_num =0 , + } +}; + +static unsigned spi0_standard_cs[] = {AT91_PIN_PA14 }; +static struct at91_spi_platform_data spi_pdata = { + .chipselect = spi0_standard_cs, + .num_chipselect =ARRAY_SIZE (spi0_standard_cs), +}; + +static void ek_add_device_spi (void ) +{ +if (at91sam9x5ek_cm_is_vendor (VENDOR_COGENT )) +spi_register_board_info (ek_cm_cogent_spi_devices, +ARRAY_SIZE (ek_cm_cogent_spi_devices)); +else +spi_register_board_info (ek_spi_devices, +ARRAY_SIZE (ek_spi_devices)); +at91_add_device_spi (0 , &spi_pdata); +} +/* * USB Host port */
@@ -188,6 +224,7 @@ static int at91sam9x5ek_devices_init(void)ek_add_device_w1 ();ek_add_device_nand ();ek_add_device_eth (); +ek_add_device_spi ();at91_add_device_usbh_ohci (&ek_usbh_data);ek_add_led ();ek_add_device_i2c ();
arch/arm/configs/at91sam9x5ek_defconfig +4 -1
@@ -52,10 +52,13 @@ CONFIG_CMD_TFTP=y CONFIG_FS_TFTP=y CONFIG_NET_NETCONSOLE=y CONFIG_DRIVER_NET_MACB=y -# CONFIG_SPI is not set +CONFIG_DRIVER_SPI_ATMEL=y +CONFIG_MTD_M25P80=y CONFIG_I2C=y CONFIG_I2C_GPIO=y CONFIG_MTD=y +# CONFIG_MTD_OOB_DEVICE is not set +CONFIG_MTD_DATAFLASH=y CONFIG_NAND=y # CONFIG_NAND_ECC_HW is not set # CONFIG_NAND_ECC_HW_SYNDROME is not set
Signature · 7 lines
1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH v3 3/4 at91sam9x5: add mci support
In reply to Jean-Christophe PLAGNIOL-VILLARD--- arch/arm/mach-at91/at91sam9x5.c | 2 + arch/arm/mach-at91/at91sam9x5_devices.c | 62 +++++++++++++++++++++++++++++++ 2 files changed, 64 insertions(+)
arch/arm/mach-at91/at91sam9x5.c +2 -0
@@ -207,6 +207,8 @@ static struct clk_lookup periph_clocks_lookups[] = {CLKDEV_CON_ID ("ohci_clk" , &uhphs_clk),CLKDEV_CON_DEV_ID ("spi_clk" ,"atmel_spi0" , &spi0_clk),CLKDEV_CON_DEV_ID ("spi_clk" ,"atmel_spi1" , &spi1_clk), +CLKDEV_CON_DEV_ID ("mci_clk" ,"atmel_mci0" , &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci1", &mmc1_clk), }; static struct clk_lookup usart_clocks_lookups[] = {
arch/arm/mach-at91/at91sam9x5_devices.c +62 -0
68 lines not on this page · raw message
Signature · 7 lines
1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH v3 4/4 at91sam9x5ek: add mci support
In reply to Jean-Christophe PLAGNIOL-VILLARDonly add mci0 (microSD slot) as mci1 conflict with spi0
--- arch/arm/boards/at91sam9x5ek/init.c | 20 ++++++++++++++++++++ arch/arm/configs/at91sam9x5ek_defconfig | 5 +++-- 2 files changed, 23 insertions(+), 2 deletions(-)
arch/arm/boards/at91sam9x5ek/init.c +20 -0
@@ -115,6 +115,25 @@ static void ek_add_device_eth(void)at91_add_device_eth (0 , &macb_pdata); } +/* +* MCI (SD/MMC) +*/ +/* mci0 detect_pin is revision dependent */ +static struct atmel_mci_platform_data mci0_data = { + .bus_width =4 , + .detect_pin =AT91_PIN_PD15 , + .wp_pin =0 , +}; + +static void ek_add_device_mci (void ) +{ +if (at91sam9x5ek_cm_is_vendor (VENDOR_COGENT )) + mci0_data.detect_pin =0 ; + +/* MMC0 */ +at91_add_device_mci (0 , &mci0_data); +} +struct qt1070_platform_data qt1070_pdata = { .irq_pin =AT91_PIN_PA7 , };
@@ -225,6 +244,7 @@ static int at91sam9x5ek_devices_init(void)ek_add_device_nand ();ek_add_device_eth ();ek_add_device_spi (); +ek_add_device_mci ();at91_add_device_usbh_ohci (&ek_usbh_data);ek_add_led ();ek_add_device_i2c ();
arch/arm/configs/at91sam9x5ek_defconfig +3 -2
@@ -65,8 +65,9 @@ CONFIG_NAND=y # CONFIG_NAND_ECC_HW_NONE is not set CONFIG_NAND_ATMEL=y CONFIG_UBI=y -CONFIG_DISK=y -CONFIG_DISK_WRITE=y +CONFIG_MCI=y +CONFIG_MCI_STARTUP=y +CONFIG_MCI_ATMEL=y CONFIG_LED=y CONFIG_LED_GPIO=y CONFIG_LED_TRIGGERS=y
Signature · 7 lines
1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
ping
Quoted 43 lines · Jean-Christophe PLAGNIOL-VILLARD
HI,
v3: rebase on the v3 of at91sam9xek i2c supportwith this +1 patch serie the support of the at91sam9x5ek is mostly complete
This will add spi and mci0 support as spi0 and mci0 conflict
We are still missing framebuffer, usb host and device and hardware i2c support but this wil be added later
This patch serie depedsn on the at91sam9x5ek i2c and m25p80 patcheries
the correct version
this one work but brake the etherent as it mux the 4 cs as gpio and we use them on the eth0
The following changes since commit
b3a0963d358e14180e9bbde68ab78fdebae071b7:m25p80: sync flash support with the kernel (2012-11-03 04:23:15 +0800)
are available in the git repository at:
git://git.jcrosoft.org/barebox.gitdelivery/at91sam9x5ek_mci_spifor you to fetch changes up to
dc7e1ce2a4ca879d07ba5786cfaa84f54d2ee763:at91sam9x5ek: add mci support (2012-11-03 04:23:48 +0800)
----------------------------------------------------------------
Jean-Christophe PLAGNIOL-VILLARD (4):
at91sam9x5: add spi support
at91sam9x5ek: add spi support
at91sam9x5: add mci support
at91sam9x5ek: add mci supportarch/arm/boards/at91sam9x5ek/init.c | 57 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/configs/at91sam9x5ek_defconfig | 10 +++++++--- arch/arm/mach-at91/at91sam9x5.c | 4 ++++ arch/arm/mach-at91/at91sam9x5_devices.c | 124 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 192 insertions(+), 3 deletions(-)
Quoted 7 lines
Best Regards,
J._______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox