Skip to contentSkip to conversation

Please pull u-boot-ti/master

U-Boot Tom Rini 3 participants 3 messages Jan 25, 2013 – Jan 26, 2013

lore
Share & tools
lore

Tom Rini

author
#0 lore raw

Hello,

The following changes since commit 7cb70a34b976e68f6348ea0718780e8f38901482:

fdt: fix dts preprocessor options (2013-01-17 09:07:59 -0700)

are available in the git repository at:

git://git.denx.de/u-boot-ti.git master

for you to fetch changes up to e25a6b504bb0c6e7a3a20cc0d2afacb6d88d29b1:

AM335X: Set fdt_high for AM335X devices to enable booting with Device Tree (2013-01-25 17:10:43 -0500)

----------------------------------------------------------------
Javier Martinez Canillas (3):
OMAP3: use a single board file for IGEP devices
OMAP3: igep00x0: add boot status GPIO LED
omap4: allow the use of a plain text env file instead boot scripts

Jeff Lance (1):
Add DDR3 support for AM335x-EVM (Version 1.5A)

Lars Poeschel (3):
am33xx: add a pulldown macro to pinmux config
pcm051: Add support for Phytec phyCORE-AM335x
am335x: display msg when reading MAC from efuse

hvaibhav at ti.com (1):
AM335X: Set fdt_high for AM335X devices to enable booting with Device Tree

 MAINTAINERS                                        |    3 +
 arch/arm/include/asm/arch-am33xx/ddr_defs.h        |   34 +++
 arch/arm/include/asm/arch-am33xx/mux.h             |    3 +-
 board/isee/igep0020/igep0020.h                     |  151 ----------
 board/isee/igep0030/Makefile                       |   43 ---
 board/isee/igep0030/igep0030.c                     |  117 --------
 board/isee/{igep0020 => igep00x0}/Makefile         |    2 +-
 .../{igep0020/igep0020.c => igep00x0/igep00x0.c}   |   51 +++-
 .../{igep0030/igep0030.h => igep00x0/igep00x0.h}   |   35 ++-
 board/phytec/pcm051/Makefile                       |   46 +++
 board/phytec/pcm051/board.c                        |  266 +++++++++++++++++
 board/phytec/pcm051/board.h                        |   33 +++
 board/phytec/pcm051/mux.c                          |  133 +++++++++
 board/ti/am335x/board.c                            |   43 ++-
 boards.cfg                                         |    9 +-
 include/configs/am335x_evm.h                       |    1 +
 include/configs/igep00x0.h                         |    5 +
 include/configs/omap4_common.h                     |   17 +-
 include/configs/pcm051.h                           |  301 ++++++++++++++++++++
 19 files changed, 951 insertions(+), 342 deletions(-)
 delete mode 100644 board/isee/igep0020/igep0020.h
 delete mode 100644 board/isee/igep0030/Makefile
 delete mode 100644 board/isee/igep0030/igep0030.c
 rename board/isee/{igep0020 => igep00x0}/Makefile (98%)
 rename board/isee/{igep0020/igep0020.c => igep00x0/igep00x0.c} (86%)
 rename board/isee/{igep0030/igep0030.h => igep00x0/igep00x0.h} (93%)
 create mode 100644 board/phytec/pcm051/Makefile
 create mode 100644 board/phytec/pcm051/board.c
 create mode 100644 board/phytec/pcm051/board.h
 create mode 100644 board/phytec/pcm051/mux.c
 create mode 100644 include/configs/pcm051.h
Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130125/fea4cf31/attachment.pgp>
#1 lore raw

Hi Tom,

Quoted 54 lines · Tom Rini

Hello,

The following changes since commit 7cb70a34b976e68f6348ea0718780e8f38901482:

fdt: fix dts preprocessor options (2013-01-17 09:07:59 -0700)

are available in the git repository at:

git://git.denx.de/u-boot-ti.git master

for you to fetch changes up to e25a6b504bb0c6e7a3a20cc0d2afacb6d88d29b1:

AM335X: Set fdt_high for AM335X devices to enable booting with Device Tree (2013-01-25 17:10:43 -0500)

----------------------------------------------------------------
Javier Martinez Canillas (3):
OMAP3: use a single board file for IGEP devices
OMAP3: igep00x0: add boot status GPIO LED
omap4: allow the use of a plain text env file instead boot scripts

Jeff Lance (1):
Add DDR3 support for AM335x-EVM (Version 1.5A)

Lars Poeschel (3):
am33xx: add a pulldown macro to pinmux config
pcm051: Add support for Phytec phyCORE-AM335x
am335x: display msg when reading MAC from efuse

hvaibhav at ti.com (1):
AM335X: Set fdt_high for AM335X devices to enable booting with Device Tree

 MAINTAINERS                                        |    3 +
 arch/arm/include/asm/arch-am33xx/ddr_defs.h        |   34 +++
 arch/arm/include/asm/arch-am33xx/mux.h             |    3 +-
 board/isee/igep0020/igep0020.h                     |  151 ----------
 board/isee/igep0030/Makefile                       |   43 ---
 board/isee/igep0030/igep0030.c                     |  117 --------
 board/isee/{igep0020 => igep00x0}/Makefile         |    2 +-
 .../{igep0020/igep0020.c => igep00x0/igep00x0.c}   |   51 +++-
 .../{igep0030/igep0030.h => igep00x0/igep00x0.h}   |   35 ++-
 board/phytec/pcm051/Makefile                       |   46 +++
 board/phytec/pcm051/board.c                        |  266 +++++++++++++++++
 board/phytec/pcm051/board.h                        |   33 +++
 board/phytec/pcm051/mux.c                          |  133 +++++++++
 board/ti/am335x/board.c                            |   43 ++-
 boards.cfg                                         |    9 +-
 include/configs/am335x_evm.h                       |    1 +
 include/configs/igep00x0.h                         |    5 +
 include/configs/omap4_common.h                     |   17 +-
 include/configs/pcm051.h                           |  301 ++++++++++++++++++++
 19 files changed, 951 insertions(+), 342 deletions(-)
 delete mode 100644 board/isee/igep0020/igep0020.h
 delete mode 100644 board/isee/igep0030/Makefile
 delete mode 100644 board/isee/igep0030/igep0030.c
Quoted 8 lines
 rename board/isee/{igep0020 => igep00x0}/Makefile (98%)
 rename board/isee/{igep0020/igep0020.c => igep00x0/igep00x0.c} (86%)
 rename board/isee/{igep0030/igep0030.h => igep00x0/igep00x0.h} (93%)
 create mode 100644 board/phytec/pcm051/Makefile
 create mode 100644 board/phytec/pcm051/board.c
 create mode 100644 board/phytec/pcm051/board.h
 create mode 100644 board/phytec/pcm051/mux.c
 create mode 100644 include/configs/pcm051.h

Tested with ELDK5.3, this PR introduces warnings in 5 boards.

pcm051 (introduced by 372d1d9367265e2ca698f82197ad657567c405f9):

mux.c:66:30: warning: 'gpio0_7_pin_mux' defined but not used [-Wunused-variable]

igep0020, igem0020_nand, igep0030, igep0030_nand (introduced by b689cd584c17b985e15744c24710d5ad34a450b0):

igep00x0.h:168:24: warning: backslash-newline at end of file [enabled by default]

Commit authors CC:ed.

Amicalement,

Signature · 1 line
Albert.
#2 lore raw
Quoted 77 lines · Albert ARIBAUD

Hi Tom,

Quoted 54 lines · Tom Rini

Hello,

The following changes since commit 7cb70a34b976e68f6348ea0718780e8f38901482:

fdt: fix dts preprocessor options (2013-01-17 09:07:59 -0700)

are available in the git repository at:

git://git.denx.de/u-boot-ti.git master

for you to fetch changes up to e25a6b504bb0c6e7a3a20cc0d2afacb6d88d29b1:

AM335X: Set fdt_high for AM335X devices to enable booting with Device Tree (2013-01-25 17:10:43 -0500)

----------------------------------------------------------------
Javier Martinez Canillas (3):
OMAP3: use a single board file for IGEP devices
OMAP3: igep00x0: add boot status GPIO LED
omap4: allow the use of a plain text env file instead boot scripts

Jeff Lance (1):
Add DDR3 support for AM335x-EVM (Version 1.5A)

Lars Poeschel (3):
am33xx: add a pulldown macro to pinmux config
pcm051: Add support for Phytec phyCORE-AM335x
am335x: display msg when reading MAC from efuse

hvaibhav at ti.com (1):
AM335X: Set fdt_high for AM335X devices to enable booting with Device Tree

 MAINTAINERS                                        |    3 +
 arch/arm/include/asm/arch-am33xx/ddr_defs.h        |   34 +++
 arch/arm/include/asm/arch-am33xx/mux.h             |    3 +-
 board/isee/igep0020/igep0020.h                     |  151 ----------
 board/isee/igep0030/Makefile                       |   43 ---
 board/isee/igep0030/igep0030.c                     |  117 --------
 board/isee/{igep0020 => igep00x0}/Makefile         |    2 +-
 .../{igep0020/igep0020.c => igep00x0/igep00x0.c}   |   51 +++-
 .../{igep0030/igep0030.h => igep00x0/igep00x0.h}   |   35 ++-
 board/phytec/pcm051/Makefile                       |   46 +++
 board/phytec/pcm051/board.c                        |  266 +++++++++++++++++
 board/phytec/pcm051/board.h                        |   33 +++
 board/phytec/pcm051/mux.c                          |  133 +++++++++
 board/ti/am335x/board.c                            |   43 ++-
 boards.cfg                                         |    9 +-
 include/configs/am335x_evm.h                       |    1 +
 include/configs/igep00x0.h                         |    5 +
 include/configs/omap4_common.h                     |   17 +-
 include/configs/pcm051.h                           |  301 ++++++++++++++++++++
 19 files changed, 951 insertions(+), 342 deletions(-)
 delete mode 100644 board/isee/igep0020/igep0020.h
 delete mode 100644 board/isee/igep0030/Makefile
 delete mode 100644 board/isee/igep0030/igep0030.c
Quoted 8 lines
 rename board/isee/{igep0020 => igep00x0}/Makefile (98%)
 rename board/isee/{igep0020/igep0020.c => igep00x0/igep00x0.c} (86%)
 rename board/isee/{igep0030/igep0030.h => igep00x0/igep00x0.h} (93%)
 create mode 100644 board/phytec/pcm051/Makefile
 create mode 100644 board/phytec/pcm051/board.c
 create mode 100644 board/phytec/pcm051/board.h
 create mode 100644 board/phytec/pcm051/mux.c
 create mode 100644 include/configs/pcm051.h

Tested with ELDK5.3, this PR introduces warnings in 5 boards.

pcm051 (introduced by 372d1d9367265e2ca698f82197ad657567c405f9):

mux.c:66:30: warning: 'gpio0_7_pin_mux' defined but not used [-Wunused-variable]

igep0020, igem0020_nand, igep0030, igep0030_nand (introduced by b689cd584c17b985e15744c24710d5ad34a450b0):

Quoted 8 lines

igep00x0.h:168:24: warning: backslash-newline at end of file [enabled by default]

Commit authors CC:ed.

Amicalement,
--
Albert.

Hi Albert,

I didn't see the warning until now, sorry for being so carelessly. In the future I'll always check for warnings before sending patches.

I already sent a patch to fix this which btw is just this one-liner:

board/isee/igep00x0/igep00x0.h +1 -1
index 3a84335..ea1e9ac 100644
@@ -167,4 +167,4 @@ static void setup_net_chip(void);
 
 #define MUX_IGEP0030() \
        MUX_VAL(CP(UART1_TX),       (IDIS | PTD | DIS | M0)) /* UART1_TX */\
-       MUX_VAL(CP(UART1_RX),       (IEN  | PTD | DIS | M0)) /* UART1_RX */\
+       MUX_VAL(CP(UART1_RX),       (IEN  | PTD | DIS | M0)) /* UART1_RX */

Thanks a lot and sorry for the inconvenience.

Best regards,
Javier