Please pull u-boot-ti/master
Hello,
The following changes since commit 7cb70a34b976e68f6348ea0718780e8f38901482:
fdt: fix dts preprocessor options (2013-01-17 09:07:59 -0700)
are available in the git repository at:
git://git.denx.de/u-boot-ti.git master
for you to fetch changes up to e25a6b504bb0c6e7a3a20cc0d2afacb6d88d29b1:
AM335X: Set fdt_high for AM335X devices to enable booting with Device Tree (2013-01-25 17:10:43 -0500)
----------------------------------------------------------------
Javier Martinez Canillas (3):
OMAP3: use a single board file for IGEP devices
OMAP3: igep00x0: add boot status GPIO LED
omap4: allow the use of a plain text env file instead boot scripts
Jeff Lance (1):
Add DDR3 support for AM335x-EVM (Version 1.5A)
Lars Poeschel (3):
am33xx: add a pulldown macro to pinmux config
pcm051: Add support for Phytec phyCORE-AM335x
am335x: display msg when reading MAC from efuse
hvaibhav at ti.com (1):
AM335X: Set fdt_high for AM335X devices to enable booting with Device Tree
MAINTAINERS | 3 +
arch/arm/include/asm/arch-am33xx/ddr_defs.h | 34 +++
arch/arm/include/asm/arch-am33xx/mux.h | 3 +-
board/isee/igep0020/igep0020.h | 151 ----------
board/isee/igep0030/Makefile | 43 ---
board/isee/igep0030/igep0030.c | 117 --------
board/isee/{igep0020 => igep00x0}/Makefile | 2 +-
.../{igep0020/igep0020.c => igep00x0/igep00x0.c} | 51 +++-
.../{igep0030/igep0030.h => igep00x0/igep00x0.h} | 35 ++-
board/phytec/pcm051/Makefile | 46 +++
board/phytec/pcm051/board.c | 266 +++++++++++++++++
board/phytec/pcm051/board.h | 33 +++
board/phytec/pcm051/mux.c | 133 +++++++++
board/ti/am335x/board.c | 43 ++-
boards.cfg | 9 +-
include/configs/am335x_evm.h | 1 +
include/configs/igep00x0.h | 5 +
include/configs/omap4_common.h | 17 +-
include/configs/pcm051.h | 301 ++++++++++++++++++++
19 files changed, 951 insertions(+), 342 deletions(-)
delete mode 100644 board/isee/igep0020/igep0020.h
delete mode 100644 board/isee/igep0030/Makefile
delete mode 100644 board/isee/igep0030/igep0030.c
rename board/isee/{igep0020 => igep00x0}/Makefile (98%)
rename board/isee/{igep0020/igep0020.c => igep00x0/igep00x0.c} (86%)
rename board/isee/{igep0030/igep0030.h => igep00x0/igep00x0.h} (93%)
create mode 100644 board/phytec/pcm051/Makefile
create mode 100644 board/phytec/pcm051/board.c
create mode 100644 board/phytec/pcm051/board.h
create mode 100644 board/phytec/pcm051/mux.c
create mode 100644 include/configs/pcm051.hSignature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130125/fea4cf31/attachment.pgp>
Hi Tom,
Quoted 54 lines · Tom Rini
Hello,
The following changes since commit
7cb70a34b976e68f6348ea0718780e8f38901482:fdt: fix dts preprocessor options (2013-01-17 09:07:59 -0700)
are available in the git repository at:
git://git.denx.de/u-boot-ti.gitmasterfor you to fetch changes up to
e25a6b504bb0c6e7a3a20cc0d2afacb6d88d29b1:AM335X: Set
fdt_highfor AM335X devices to enable booting with Device Tree (2013-01-25 17:10:43 -0500)----------------------------------------------------------------
Javier Martinez Canillas (3):
OMAP3: use a single board file for IGEP devices
OMAP3: igep00x0: add boot status GPIO LED
omap4: allow the use of a plain text env file instead boot scriptsJeff Lance (1):
Add DDR3 support for AM335x-EVM (Version 1.5A)Lars Poeschel (3):
am33xx: add a pulldown macro to pinmux config
pcm051: Add support for Phytec phyCORE-AM335x
am335x: display msg when reading MAC from efusehvaibhav at ti.com (1):
AM335X: Setfdt_highfor AM335X devices to enable booting with Device TreeMAINTAINERS | 3 + arch/arm/include/asm/arch-am33xx/ddr_defs.h | 34 +++ arch/arm/include/asm/arch-am33xx/mux.h | 3 +- board/isee/igep0020/igep0020.h | 151 ---------- board/isee/igep0030/Makefile | 43 --- board/isee/igep0030/igep0030.c | 117 -------- board/isee/{igep0020 => igep00x0}/Makefile | 2 +- .../{igep0020/igep0020.c => igep00x0/igep00x0.c} | 51 +++- .../{igep0030/igep0030.h => igep00x0/igep00x0.h} | 35 ++- board/phytec/pcm051/Makefile | 46 +++ board/phytec/pcm051/board.c | 266 +++++++++++++++++ board/phytec/pcm051/board.h | 33 +++ board/phytec/pcm051/mux.c | 133 +++++++++ board/ti/am335x/board.c | 43 ++- boards.cfg | 9 +- include/configs/am335x_evm.h | 1 + include/configs/igep00x0.h | 5 + include/configs/omap4_common.h | 17 +- include/configs/pcm051.h | 301 ++++++++++++++++++++ 19 files changed, 951 insertions(+), 342 deletions(-) delete mode 100644 board/isee/igep0020/igep0020.h delete mode 100644 board/isee/igep0030/Makefile delete mode 100644 board/isee/igep0030/igep0030.c
Quoted 8 lines
rename board/isee/{igep0020 => igep00x0}/Makefile (98%)
rename board/isee/{igep0020/igep0020.c => igep00x0/igep00x0.c} (86%)
rename board/isee/{igep0030/igep0030.h => igep00x0/igep00x0.h} (93%)
create mode 100644 board/phytec/pcm051/Makefile
create mode 100644 board/phytec/pcm051/board.c
create mode 100644 board/phytec/pcm051/board.h
create mode 100644 board/phytec/pcm051/mux.c
create mode 100644 include/configs/pcm051.hTested with ELDK5.3, this PR introduces warnings in 5 boards.
pcm051 (introduced by 372d1d9367265e2ca698f82197ad657567c405f9):
mux.c:66:30: warning: 'gpio0_7_pin_mux' defined but not used [-Wunused-variable]
igep0020, igem0020_nand, igep0030, igep0030_nand (introduced by b689cd584c17b985e15744c24710d5ad34a450b0):
igep00x0.h:168:24: warning: backslash-newline at end of file [enabled by default]
Commit authors CC:ed.
Amicalement,
Signature · 1 line
Albert.
Quoted 77 lines · Albert ARIBAUD
Hi Tom,
Quoted 54 lines · Tom Rini
Hello,
The following changes since commit
7cb70a34b976e68f6348ea0718780e8f38901482:fdt: fix dts preprocessor options (2013-01-17 09:07:59 -0700)
are available in the git repository at:
git://git.denx.de/u-boot-ti.gitmasterfor you to fetch changes up to
e25a6b504bb0c6e7a3a20cc0d2afacb6d88d29b1:AM335X: Set
fdt_highfor AM335X devices to enable booting with Device Tree (2013-01-25 17:10:43 -0500)----------------------------------------------------------------
Javier Martinez Canillas (3):
OMAP3: use a single board file for IGEP devices
OMAP3: igep00x0: add boot status GPIO LED
omap4: allow the use of a plain text env file instead boot scriptsJeff Lance (1):
Add DDR3 support for AM335x-EVM (Version 1.5A)Lars Poeschel (3):
am33xx: add a pulldown macro to pinmux config
pcm051: Add support for Phytec phyCORE-AM335x
am335x: display msg when reading MAC from efusehvaibhav at ti.com (1):
AM335X: Setfdt_highfor AM335X devices to enable booting with Device TreeMAINTAINERS | 3 + arch/arm/include/asm/arch-am33xx/ddr_defs.h | 34 +++ arch/arm/include/asm/arch-am33xx/mux.h | 3 +- board/isee/igep0020/igep0020.h | 151 ---------- board/isee/igep0030/Makefile | 43 --- board/isee/igep0030/igep0030.c | 117 -------- board/isee/{igep0020 => igep00x0}/Makefile | 2 +- .../{igep0020/igep0020.c => igep00x0/igep00x0.c} | 51 +++- .../{igep0030/igep0030.h => igep00x0/igep00x0.h} | 35 ++- board/phytec/pcm051/Makefile | 46 +++ board/phytec/pcm051/board.c | 266 +++++++++++++++++ board/phytec/pcm051/board.h | 33 +++ board/phytec/pcm051/mux.c | 133 +++++++++ board/ti/am335x/board.c | 43 ++- boards.cfg | 9 +- include/configs/am335x_evm.h | 1 + include/configs/igep00x0.h | 5 + include/configs/omap4_common.h | 17 +- include/configs/pcm051.h | 301 ++++++++++++++++++++ 19 files changed, 951 insertions(+), 342 deletions(-) delete mode 100644 board/isee/igep0020/igep0020.h delete mode 100644 board/isee/igep0030/Makefile delete mode 100644 board/isee/igep0030/igep0030.cQuoted 8 lines
rename board/isee/{igep0020 => igep00x0}/Makefile (98%) rename board/isee/{igep0020/igep0020.c => igep00x0/igep00x0.c} (86%) rename board/isee/{igep0030/igep0030.h => igep00x0/igep00x0.h} (93%) create mode 100644 board/phytec/pcm051/Makefile create mode 100644 board/phytec/pcm051/board.c create mode 100644 board/phytec/pcm051/board.h create mode 100644 board/phytec/pcm051/mux.c create mode 100644 include/configs/pcm051.hTested with ELDK5.3, this PR introduces warnings in 5 boards.
pcm051 (introduced by
372d1d9367265e2ca698f82197ad657567c405f9):mux.c:66:30: warning: '
gpio0_7_pin_mux' defined but not used [-Wunused-variable]igep0020,
igem0020_nand, igep0030,igep0030_nand(introduced byb689cd584c17b985e15744c24710d5ad34a450b0):
Quoted 8 lines
igep00x0.h:168:24: warning: backslash-newline at end of file [enabled by default]
Commit authors CC:ed.
Amicalement,
--
Albert.
Hi Albert,
I didn't see the warning until now, sorry for being so carelessly. In the future I'll always check for warnings before sending patches.
I already sent a patch to fix this which btw is just this one-liner:
board/isee/igep00x0/igep00x0.h +1 -1
@@ -167,4 +167,4 @@ static void setup_net_chip(void);#define MUX_IGEP0030 () \ MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0))/* UART1_TX */ \ -MUX_VAL (CP (UART1_RX ), (IEN |PTD |DIS |M0 ))/* UART1_RX */ \ +MUX_VAL (CP (UART1_RX ), (IEN |PTD |DIS |M0 ))/* UART1_RX */
Thanks a lot and sorry for the inconvenience.
Best regards,
Javier