randconfig errors

Errors from randconfig builds restricted to multi-platform configs on the current linux-next. I know I've seen a fix on the first one from Arnd, but have not investigated any of these.

/var/lib/jenkins/jobs/linux-randconfig/workspace/arch/arm/kernel/arch_timer.c:55:11: error: 'ENXIO' undeclared (first use in this function) /var/lib/jenkins/jobs/linux-randconfig/workspace/arch/arm/mach-imx/mach-imx6q.c:248:2: error: implicit declaration of function 'of_init_opp_table' [-Werror=implicit-function-declaration] /var/lib/jenkins/jobs/linux-randconfig/workspace/arch/arm/mach-omap2/omap_hwmod_reset.c:47:11: error: 'EINVAL' undeclared (first use in this function) /var/lib/jenkins/jobs/linux-randconfig/workspace/arch/arm/mach-omap2/soc.h:118:19: error: redefinition of 'soc_is_omap' /var/lib/jenkins/jobs/linux-randconfig/workspace/arch/arm/mach-omap2/soc.h:184:1: error: redefinition of 'is_omap24xx' /var/lib/jenkins/jobs/linux-randconfig/workspace/arch/arm/mach-omap2/soc.h:185:1: error: redefinition of 'is_omap34xx' /var/lib/jenkins/jobs/linux-randconfig/workspace/arch/arm/mach-omap2/soc.h:186:1: error: redefinition of 'is_omap44xx' /var/lib/jenkins/jobs/linux-randconfig/workspace/arch/arm/mach-omap2/soc.h:187:1: error: redefinition of 'is_am35xx'

/var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/clk/clk-vt8500.c:160:24: error: 'prate' undeclared (first use in this function)

/var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/crypto/omap-aes.c:363:2: error: implicit declaration of function 'dma_request_slave_channel_compat' [-Werror=implicit-function-declaration] /var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/crypto/omap-sham.c:1707:2: error: implicit declaration of function 'dma_request_slave_channel_compat' [-Werror=implicit-function-declaration]

/var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/gpu/drm/drm_pci.c:485:2: error: implicit declaration of function 'pcie_capability_read_dword' [-Werror=implicit-function-declaration]

/var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/iio/common/st_sensors/st_sensors_trigger.c:21:5: error: redefinition of 'st_sensors_allocate_trigger' /var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/iio/common/st_sensors/st_sensors_trigger.c:65:6: error: redefinition of 'st_sensors_deallocate_trigger' /var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c:176:3: error: implicit declaration of function 'iio_push_to_buffers' [-Werror=implicit-function-declaration] /var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c:106:36: error: dereferencing pointer to incomplete type /var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c:109:21: error: variable 'inv_mpu_trigger_ops' has initializer but incomplete type /var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c:110:2: error: unknown field 'owner' specified in initializer /var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c:111:2: error: unknown field 'set_trigger_state' specified in initializer /var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c:119:2: error: implicit declaration of function 'iio_trigger_alloc' [-Werror=implicit-function-declaration]

/var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c:126:38: error: 'iio_trigger_generic_data_rdy_poll' undeclared (first use in this function) /var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c:132:10: error: dereferencing pointer to incomplete type /var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c:133:10: error: dereferencing pointer to incomplete type /var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c:134:10: error: dereferencing pointer to incomplete type /var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c:135:2: error: implicit declaration of function 'iio_trigger_register' [-Werror=implicit-function-declaration] /var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c:145:2: error: implicit declaration of function 'iio_trigger_free' [-Werror=implicit-function-declaration] /var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c:152:2: error: implicit declaration of function 'iio_trigger_unregister' [-Werror=implicit-function-declaration] /var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/iio/industrialio-triggered-buffer.c:20:16: error: 'iio_sw_buffer_preenable' undeclared here (not in a function)

/var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/media/platform/davinci/vpss.c:28:27: fatal error: mach/hardware.h: No such file or directory

/var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/remoteproc/omap_remoteproc.c:31:26: fatal error: plat/mailbox.h: No such file or directory

/var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/tty/serial/8250/8250.c:2712:47: error: 'CONFIG_SERIAL_8250_NR_UARTS' undeclared here (not in a function) /var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/tty/serial/8250/8250.c:2971:20: error: negative width in bit-field '<anonymous>' /var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/tty/serial/8250/8250.c:57:32: error: 'CONFIG_SERIAL_8250_RUNTIME_UARTS' undeclared here (not in a function) /var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/tty/serial/omap-serial.c:1185:14: error: 'struct uart_port' has no member named 'sysrq'

/var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/usb/host/uhci-hcd.c:857:2: error: #error "missing bus glue for uhci-hcd"

/var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/video/omap2/dss/dss.c:572:20: error: 'CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK' undeclared (first use in this function)

/var/lib/jenkins/jobs/linux-randconfig/workspace/include/linux/kvm_host.h:333:34: error: 'KVM_USER_MEM_SLOTS' undeclared here (not in a function) /var/lib/jenkins/jobs/linux-randconfig/workspace/security/integrity/ima/ima_policy.c:538:4: error: implicit declaration of function 'part_pack_uuid' [-Werror=implicit-function-declaration]

Quoted 1 line

/var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/clk/clk-vt8500.c:160:24: error: 'prate' undeclared (first use in this function)

I've seen this one with allyesconfig but have not tried to make a fix

From efb8dbe114579b4f459b3810e83d79b11593436a Mon Sep 17 00:00:00 2001

Quoting Arnd Bergmann (2013-02-15 10:00:36)

Quoted 3 lines · Rob Herring

Quoted 1 line

/var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/clk/clk-vt8500.c:160:24: error: 'prate' undeclared (first use in this function)

I've seen this one with allyesconfig but have not tried to make a fix

Looks like this one was introduced by 7248001, "clk: vt8500: Fix device clock divisor calculations".

Looks like a copy/paste error where prate was used instead of parent_rate.

Tony can you test the below patch?

Regards,
Mike

Quoted 1 line

From efb8dbe114579b4f459b3810e83d79b11593436a Mon Sep 17 00:00:00 2001

From: Mike Turquette <[email protected]>
Date: Fri, 15 Feb 2013 12:03:51 -0800
Subject: [PATCH] clk: vt8500: copy-paste mistake in dclk_set_rate

Commit 7248001, "clk: vt8500: Fix device clock divisor calculations" introduced logic to improve divider selection while changing rates for the VT8500 dclk. However a copy-paste error results in using the wrong variable name in the .set_rate callback. Fixed by changing *prate to parent_rate. The .round_rate function is correct and remains unchanged.

Signed-off-by Mike Turquette <[email protected]>

Cc Tony Prisk <[email protected]>

Cc Arnd Bergmann <[email protected]>

Cc Rob Herring <[email protected]>

---
  drivers/clk/clk-vt8500.c |    4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)

drivers/clk/clk-vt8500.c +0 -0

index b5538bb..c010861 100644

Quoted 28 lines

Commit 7248001, "clk: vt8500: Fix device clock divisor calculations" introduced logic to improve divider selection while changing rates for the VT8500 dclk. However a copy-paste error results in using the wrong variable name in the .set_rate callback. Fixed by changing *prate to parent_rate. The .round_rate function is correct and remains unchanged.

Signed-off-by Mike Turquette <[email protected]>

Cc Tony Prisk <[email protected]>

Cc Arnd Bergmann <[email protected]>

Cc Rob Herring <[email protected]>

---
  drivers/clk/clk-vt8500.c |    4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)

drivers/clk/clk-vt8500.c +2 -2

index b5538bb..c010861 100644
@@ -156,8 +156,8 @@ static int vt8500_dclk_set_rate(struct clk_hw *hw, unsigned long rate,
 
      divisor =  parent_rate / rate;
 
-     /* If prate / rate would be decimal, incr the divisor */
-     if (rate * divisor < *prate)
+     /* If parent_rate / rate would be decimal, incr the divisor */
+     if (rate * divisor < parent_rate)
              divisor++;
 

drivers/clk/clk-vt8500.c static int vt8500_dclk_set_rate(struct clk_hw *hw, unsigned long rate, · line 163

Quoted 1 line

drivers/clk/clk-vt8500.c +0 -0

      if (divisor == cdev->div_mask + 1)

What about just

         divisor = (parent_rate + rate - 1) / rate;

Errors from randconfig builds restricted to multi-platform configs on the current linux-next. I know I've seen a fix on the first one from Arnd, but have not investigated any of these.

error: 'KVM_USER_MEM_SLOTS' undeclared here (not in a function)

Quoted 6 lines · Rob Herring

Errors from randconfig builds restricted to multi-platform configs on the current linux-next. I know I've seen a fix on the first one from Arnd, but have not investigated any of these.

Quoted 1 line

error: 'KVM_USER_MEM_SLOTS' undeclared here (not in a function)

This one comes from bbacc0c (KVM: Rename KVM_MEMORY_SLOTS -> KVM_USER_MEM_SLOTS).
I'll queue a patch to fix the breakage...

Quoted 9 lines · Marc Zyngier

Quoted 6 lines · Rob Herring

Errors from randconfig builds restricted to multi-platform configs on the current linux-next. I know I've seen a fix on the first one from Arnd, but have not investigated any of these.

/var/lib/jenkins/jobs/linux-randconfig/workspace/include/linux/kvm_host.h:333:34:

Quoted 2 lines

Quoted 1 line

error: 'KVM_USER_MEM_SLOTS' undeclared here (not in a function)

Quoted 3 lines

This one comes from bbacc0c (KVM: Rename KVM_MEMORY_SLOTS -> KVM_USER_MEM_SLOTS).
I'll queue a patch to fix the breakage...

Looks like there's a few more, and what was brewing in kvm-next had some side effects.

Christoffer, I'll send the patches separately.

Quoted 18 lines · Marc Zyngier

Quoted 9 lines · Marc Zyngier

Quoted 6 lines · Rob Herring

Errors from randconfig builds restricted to multi-platform configs on the current linux-next. I know I've seen a fix on the first one from Arnd, but have not investigated any of these.

/var/lib/jenkins/jobs/linux-randconfig/workspace/include/linux/kvm_host.h:333:34:

Quoted 5 lines

Quoted 1 line

error: 'KVM_USER_MEM_SLOTS' undeclared here (not in a function)

This one comes from bbacc0c (KVM: Rename KVM_MEMORY_SLOTS -> KVM_USER_MEM_SLOTS).
I'll queue a patch to fix the breakage...

Quoted 5 lines

Looks like there's a few more, and what was brewing in kvm-next had some side effects.

Christoffer, I'll send the patches separately.

I was kind of hoping that the KVM guys would have pulled the KVM/ARM stuff into kvm/next and it could have been fixed up there.... The patches are really trivial though iirc.

Quoted 22 lines · Christoffer Dall

Quoted 21 lines · Marc Zyngier

Quoted 9 lines · Marc Zyngier

Quoted 6 lines · Rob Herring

Errors from randconfig builds restricted to multi-platform configs on the current linux-next. I know I've seen a fix on the first one from Arnd, but have not investigated any of these.

/var/lib/jenkins/jobs/linux-randconfig/workspace/include/linux/kvm_host.h:333:34:

Quoted 5 lines

Quoted 1 line

error: 'KVM_USER_MEM_SLOTS' undeclared here (not in a function)

This one comes from bbacc0c (KVM: Rename KVM_MEMORY_SLOTS -> KVM_USER_MEM_SLOTS).
I'll queue a patch to fix the breakage...

Looks like there's a few more, and what was brewing in kvm-next had some side effects.

Quoted 5 lines

Quoted 2 lines

Christoffer, I'll send the patches separately.

I was kind of hoping that the KVM guys would have pulled the KVM/ARM stuff into kvm/next and it could have been fixed up there.... The patches are really trivial though iirc.

Indeed they are. Probably an oversight from the KVM guys. Sent them anyway...

Quoted 3 lines · Rob Herring

Errors from randconfig builds restricted to multi-platform configs on the current linux-next. I know I've seen a fix on the first one from Arnd, but have not investigated any of these.

I have seen some of these before with the allyesconfig builds. Investigating randconfig is on my list for next week.

Quoted 8 lines

/var/lib/jenkins/jobs/linux-randconfig/workspace/arch/arm/kernel/arch_timer.c:55:11: error: 'ENXIO' undeclared (first use in this function) /var/lib/jenkins/jobs/linux-randconfig/workspace/arch/arm/mach-imx/mach-imx6q.c:248:2: error: implicit declaration of function 'of_init_opp_table' [-Werror=implicit-function-declaration] /var/lib/jenkins/jobs/linux-randconfig/workspace/arch/arm/mach-omap2/omap_hwmod_reset.c:47:11: error: 'EINVAL' undeclared (first use in this function) /var/lib/jenkins/jobs/linux-randconfig/workspace/arch/arm/mach-omap2/soc.h:118:19: error: redefinition of 'soc_is_omap' /var/lib/jenkins/jobs/linux-randconfig/workspace/arch/arm/mach-omap2/soc.h:184:1: error: redefinition of 'is_omap24xx' /var/lib/jenkins/jobs/linux-randconfig/workspace/arch/arm/mach-omap2/soc.h:185:1: error: redefinition of 'is_omap34xx' /var/lib/jenkins/jobs/linux-randconfig/workspace/arch/arm/mach-omap2/soc.h:186:1: error: redefinition of 'is_omap44xx' /var/lib/jenkins/jobs/linux-randconfig/workspace/arch/arm/mach-omap2/soc.h:187:1: error: redefinition of 'is_am35xx'

Patch is queued in arm-soc now.

Quoted 1 line

/var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/clk/clk-vt8500.c:160:24: error: 'prate' undeclared (first use in this function)

I've seen this one with allyesconfig but have not tried to make a fix

Quoted 2 lines

/var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/crypto/omap-aes.c:363:2: error: implicit declaration of function 'dma_request_slave_channel_compat' [-Werror=implicit-function-declaration] /var/lib/jenkins/jobs/linux-randconfig/workspace/drivers/crypto/omap-sham.c:1707:2: error: implicit declaration of function 'dma_request_slave_channel_compat' [-Werror=implicit-function-declaration]

These are waiting for a patch from Matt Porter, "[PATCH v7 07/10] dmaengine: add dma_request_slave_channel_compat()". Matt, what is your plan for this? I assume it's too late to get the entire series into 3.9, but you have Vinod's Ack on this one, and it should probably get merged early on because of the other subsystems that are not tracking their dependencies ;-)

I'd be happy to see at least the compat() patch be picked up. Chris had to drop the omap_hsmmc dt dmaengine patches until that one is merged. I'm not sure whose tree that one should go through at this point...perhaps via Chris' tree now?

I would expect him to say no them at this point though, and in that case, I think it should be either the slave-dma tree or the arm-soc tree.

Quoted 4 lines · Matt Porter

I'd be happy to see at least the compat() patch be picked up. Chris had to drop the omap_hsmmc dt dmaengine patches until that one is merged. I'm not sure whose tree that one should go through at this point...perhaps via Chris' tree now?

It really should have been in the crypto tree before Mark's patches to use them, but if Chris is still considering the the hsmmc dt patches for 3.9, including them there is probably the best way forward.

I would expect him to say no them at this point though, and in that case, I think it should be either the slave-dma tree or the arm-soc tree.

Quoted 7 lines

It really should have been in the crypto tree before Mark's patches to use them, but if Chris is still considering the the hsmmc dt patches for 3.9, including them there is probably the best way forward.

I would expect him to say no them at this point though, and in that case, I think it should be either the slave-dma tree or the arm-soc tree.

Do you want me to add the compat() patch? I had acked it sometime back

I was hoping to send the PULL request in a day or two... Pls let me know...

/var/lib/jenkins/jobs/linux-randconfig/workspace/arch/arm/mach-imx/mach-imx6q.c:248:2: error: implicit declaration of function 'of_init_opp_table' [-Werror=implicit-function-declaration]