THP support for PPC64
Subsystems (12)
cover THP support for PPC64
Hi,
This patchset adds transparent huge page support for PPC64.
I am marking the series to linux-mm because the PPC64 implementation required few interface changes to core THP code. I still have considerable number of FIXME!! in the patchset mostly related to PPC64 mm susbsytem. Those would require closer review and once we are clear on those changes, I will drop those FIXME!! with necessary comments.
Some numbers:
The latency measurements code from Anton found at
http://ozlabs.org/~anton/junkcode/latency2001.c
THP disabled 64K page size
------------------------
[root@llmp24l02 ~]# ./latency2001 8G
8589934592 731.73 cycles 205.77 ns
[root@llmp24l02 ~]# ./latency2001 8G
8589934592 743.39 cycles 209.05 ns
[root@llmp24l02 ~]#
THP disabled large page via hugetlbfs
-------------------------------------
[root@llmp24l02 ~]# ./latency2001 -l 8G
8589934592 416.09 cycles 117.01 ns
[root@llmp24l02 ~]# ./latency2001 -l 8G
8589934592 415.74 cycles 116.91 ns
THP enabled 64K page size.
----------------
[root@llmp24l02 ~]# ./latency2001 8G
8589934592 405.07 cycles 113.91 ns
[root@llmp24l02 ~]# ./latency2001 8G
8589934592 411.82 cycles 115.81 ns
[root@llmp24l02 ~]#
We are close to hugetlbfs in latency and we can achieve this with zero config/page reservation. Most of the allocations above are fault allocated. I haven't really measured the collapse alloc impact.
Another test that does 50000000 random access over 1GB area goes from 2.65 seconds to 1.07 seconds with this patchset.
Changes from RFC V1:
* HugeTLB fs now works
* Compile issues fixed
* rebased to v3.8
* Patch series reorded so that ppc64 cleanups and MM THP changes are moved early in the series. This should help in picking those patches early.
Thanks,
-aneesh
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
RFC PATCH 1/21 powerpc: Use signed formatting when printing error
From: "Aneesh Kumar K.V" <[email protected]>
PAPR define these errors as negative values. So print them accordingly for easy debugging.
--- arch/powerpc/platforms/pseries/lpar.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/platforms/pseries/lpar.c +1 -1
@@ -155,7 +155,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,*/ if (unlikely (lpar_rc !=H_SUCCESS )) {if (!(vflags &HPTE_V_BOLTED )) -pr_devel (" lpar err %lu\n" , lpar_rc); +pr_devel (" lpar err %ld\n" , lpar_rc);return -2 ; }if (!(vflags &HPTE_V_BOLTED ))
Signature · 7 lines
1.7.10 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC PATCH -V2 01/21] powerpc: Use signed formatting when printing error
Quoted 3 lines · Aneesh Kumar K.V
From: "Aneesh Kumar K.V" <[email protected]>
PAPR define these errors as negative values. So print them accordingly
^ defines
Quoted 3 lines
for easy debugging.
Signed-off-by Aneesh Kumar K.V <[email protected]>
RFC PATCH 2/21 powerpc: Save DAR and DSISR in pt_regs on MCE
In reply to Aneesh Kumar K.VFrom: "Aneesh Kumar K.V" <[email protected]>
We were not saving DAR and DSISR on MCE. Save then and also print the values along with exception details in xmon.
--- arch/powerpc/kernel/exceptions-64s.S | 9 +++++++++ arch/powerpc/xmon/xmon.c | 2 +- 2 files changed, 10 insertions(+), 1 deletion(-)
arch/powerpc/kernel/exceptions-64s.S +9 -0
@@ -640,9 +640,18 @@ slb_miss_user_pseries: .align 7 .globl machine_check_common machine_check_common: + + mfspr r10,SPRN_DAR + std r10,PACA_EXGEN+EX_DAR(r13) + mfspr r10,SPRN_DSISR + stw r10,PACA_EXGEN+EX_DSISR(r13) EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC) FINISH_NAP DISABLE_INTS + ld r3,PACA_EXGEN+EX_DAR(r13) + lwz r4,PACA_EXGEN+EX_DSISR(r13) + std r3,_DAR(r1) + std r4,_DSISR(r1) bl .save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl .machine_check_exception
arch/powerpc/xmon/xmon.c +1 -1
@@ -1423,7 +1423,7 @@ static void excprint(struct pt_regs *fp)printf (" sp: %lx\n" , fp->gpr[1 ]);printf (" msr: %lx\n" , fp->msr); -if (trap ==0x300 || trap ==0x380 || trap ==0x600 ) { +if (trap ==0x300 || trap ==0x380 || trap ==0x600 || trap ==0x200 ) {printf (" dar: %lx\n" , fp->dar);if (trap !=0x380 )printf (" dsisr: %lx\n" , fp->dsisr);
Signature · 7 lines
1.7.10 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC PATCH -V2 02/21] powerpc: Save DAR and DSISR in pt_regs on MCE
Quoted 4 lines · Aneesh Kumar K.V
From: "Aneesh Kumar K.V" <[email protected]>
We were not saving DAR and DSISR on MCE. Save then and also print the values along with exception details in xmon.
The one reservation I have about this is that xmon will now be printing bogus values on 32-bit and embedded processors. However, it seems 32-bit doesn't set regs->dar on a DSI (300) interrupt either. So:
RFC PATCH 3/21 powerpc: Don't hard code the size of pte page
In reply to Aneesh Kumar K.VFrom: "Aneesh Kumar K.V" <[email protected]>
USE PTRS_PER_PTE to indicate the size of pte page.
powerpc: Don't hard code the size of pte page
USE PTRS_PER_PTE to indicate the size of pte page.
--- arch/powerpc/include/asm/pgtable.h | 6 ++++++ arch/powerpc/mm/hash_low_64.S | 4 ++-- 2 files changed, 8 insertions(+), 2 deletions(-)
arch/powerpc/include/asm/pgtable.h +6 -0
@@ -17,6 +17,12 @@ struct mm_struct;# include <asm/pgtable-ppc32.h> #endif +/* +* hidx is in the second half of the page table. We use the +* 8 bytes per each pte entry. +*/ +#define PTE_PAGE_HIDX_OFFSET (PTRS_PER_PTE * 8) +#ifndef __ASSEMBLY__#include <asm/tlbflush.h>
arch/powerpc/mm/hash_low_64.S +2 -2
@@ -490,7 +490,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE) beq htab_inval_old_hpte ld r6,STK_PARAM(R6)(r1) - ori r26,r6,0x8000 /* Load the hidx mask */ + ori r26,r6,PTE_PAGE_HIDX_OFFSET /* Load the hidx mask. */ ld r26,0(r26) addi r5,r25,36 /* Check actual HPTE_SUB bit, this */ rldcr. r0,r31,r5,0 /* must match pgtable.h definition */
@@ -607,7 +607,7 @@ htab_pte_insert_ok: sld r4,r4,r5 andc r26,r26,r4 or r26,r26,r3 - ori r5,r6,0x8000 + ori r5,r6,PTE_PAGE_HIDX_OFFSET std r26,0(r5) lwsync std r30,0(r6)
Signature · 1 line
1.7.10
Re: [RFC PATCH -V2 03/21] powerpc: Don't hard code the size of pte page
Quoted 10 lines · Aneesh Kumar K.V
From: "Aneesh Kumar K.V" <[email protected]>
USE
PTRS_PER_PTEto indicate the size of pte page.Signed-off-by Aneesh Kumar K.V <[email protected]>powerpc: Don't hard code the size of pte page
USE
PTRS_PER_PTEto indicate the size of pte page.Signed-off-by Aneesh Kumar K.V <[email protected]>
Description and signoff are duplicated. Description could be more informative, for example - why would we want to do this?
Quoted 3 lines
+/*
+ * hidx is in the second half of the page table. We use the
+ * 8 bytes per each pte entry.
The casual reader probably wouldn't know what "hidx" is. The comment needs at least to use a better name than "hidx".
Paul.
Re: [RFC PATCH -V2 03/21] powerpc: Don't hard code the size of pte page
Quoted 15 lines · Paul Mackerras
Quoted 10 lines · Aneesh Kumar K.V
From: "Aneesh Kumar K.V" <[email protected]>
USE
PTRS_PER_PTEto indicate the size of pte page.Signed-off-by Aneesh Kumar K.V <[email protected]>powerpc: Don't hard code the size of pte page
USE
PTRS_PER_PTEto indicate the size of pte page.Signed-off-by Aneesh Kumar K.V <[email protected]>Description and signoff are duplicated. Description could be more informative, for example - why would we want to do this?
Quoted 6 lines
Quoted 3 lines
+/*
+ * hidx is in the second half of the page table. We use the
+ * 8 bytes per each pte entry.The casual reader probably wouldn't know what "hidx" is. The comment needs at least to use a better name than "hidx".
how about
+/*
+ * We save the slot number & secondary bit in the second half of the
+ * PTE page. We use the 8 bytes per each pte entry.
+ */
-aneesh
RFC PATCH 4/21 powerpc: Reduce the PTE_INDEX_SIZE
In reply to Aneesh Kumar K.VFrom: "Aneesh Kumar K.V" <[email protected]>
This make one PMD cover 16MB range. That helps in easier implementation of THP on power. THP core code make use of one pmd entry to track the huge page and the range mapped by a single pmd entry should be equal to the huge page size supported by the hardware.
--- arch/powerpc/include/asm/pgtable-ppc64-64k.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/powerpc/include/asm/pgtable-ppc64-64k.h +2 -2
@@ -4,10 +4,10 @@#include <asm-generic/pgtable-nopud.h> -#define PTE_INDEX_SIZE 12 +#define PTE_INDEX_SIZE 8#define PMD_INDEX_SIZE 12#define PUD_INDEX_SIZE 0 -#define PGD_INDEX_SIZE 6 +#define PGD_INDEX_SIZE 10#ifndef __ASSEMBLY__#define PTE_TABLE_SIZE (sizeof(real_pte_t) << PTE_INDEX_SIZE)
Signature · 7 lines
1.7.10 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC PATCH -V2 04/21] powerpc: Reduce the PTE_INDEX_SIZE
Quoted 8 lines · Aneesh Kumar K.V
From: "Aneesh Kumar K.V" <[email protected]>
This make one PMD cover 16MB range. That helps in easier implementation of THP on power. THP core code make use of one pmd entry to track the huge page and the range mapped by a single pmd entry should be equal to the huge page size supported by the hardware.
Signed-off-by Aneesh Kumar K.V <[email protected]>
RFC PATCH 5/21 powerpc: Reduce PTE table memory wastage
In reply to Aneesh Kumar K.VFrom: "Aneesh Kumar K.V" <[email protected]>
We now have PTE page consuming only 2K of the 64K page.This is in order to facilitate transparent huge page support, which works much better if our PMDs cover 16MB instead of 256MB.
Inorder to reduce the wastage, we now have multiple PTE page fragment from the same PTE page.
--- arch/powerpc/include/asm/mmu-book3e.h | 4 + arch/powerpc/include/asm/mmu-hash64.h | 4 + arch/powerpc/include/asm/page.h | 4 + arch/powerpc/include/asm/pgalloc-32.h | 45 ++++++++ arch/powerpc/include/asm/pgalloc-64.h | 143 ++++++++++++++++++++----- arch/powerpc/include/asm/pgalloc.h | 46 +------- arch/powerpc/kernel/setup_64.c | 4 +- arch/powerpc/mm/mmu_context_hash64.c | 27 +++++ arch/powerpc/mm/pgtable_64.c | 189 +++++++++++++++++++++++++++++++++ 9 files changed, 392 insertions(+), 74 deletions(-)
arch/powerpc/include/asm/mmu-book3e.h +4 -0
@@ -231,6 +231,10 @@ typedef struct {u64 high_slices_psize;/* 4 bits per slice for now */ u16 user_psize;/* page size index */ #endif +#ifdef CONFIG_PPC_64K_PAGES +/* for 2K page table support */ +struct list_head pgtable_list; +#endif } mm_context_t;/* Page size definitions, common between 32 and 64-bit
arch/powerpc/include/asm/mmu-hash64.h +4 -0
@@ -498,6 +498,10 @@ typedef struct {unsigned long acop;/* mask of enabled coprocessor types */ unsigned int cop_pid;/* pid value used with coprocessors */ #endif /* CONFIG_PPC_ICSWX */ +#ifdef CONFIG_PPC_64K_PAGES +/* for 2K page table support */ +struct list_head pgtable_list; +#endif } mm_context_t;
arch/powerpc/include/asm/page.h +4 -0
@@ -378,7 +378,11 @@ void arch_free_page(struct page *page, int order);struct vm_area_struct ; +#ifdef CONFIG_PPC_64K_PAGES +typedef pte_t *pgtable_t ; +#else typedef struct page *pgtable_t ; +#endif #include <asm-generic/memory_model.h> #endif /* __ASSEMBLY__ */
arch/powerpc/include/asm/pgalloc-32.h +45 -0
55 lines not on this page · raw message
arch/powerpc/include/asm/pgalloc-64.h +115 -28
175 lines not on this page · raw message
arch/powerpc/include/asm/pgalloc.h +1 -45
63 lines not on this page · raw message
arch/powerpc/kernel/setup_64.c +3 -1
@@ -575,7 +575,9 @@ void __init setup_arch(char **cmdline_p) init_mm.end_code = (unsigned long ) _etext; init_mm.end_data = (unsigned long ) _edata; init_mm.brk = klimit; - +#ifdef CONFIG_PPC_64K_PAGES +INIT_LIST_HEAD (&init_mm.context.pgtable_list); +#endif irqstack_early_init ();exc_lvl_early_init ();emergency_stack_init ();
arch/powerpc/mm/mmu_context_hash64.c +27 -0
@@ -86,6 +86,9 @@ int init_new_context(struct task_struct *tsk, struct mm_struct *mm)spin_lock_init (mm->context.cop_lockp);#endif /* CONFIG_PPC_ICSWX */ +#ifdef CONFIG_PPC_64K_PAGES +INIT_LIST_HEAD (&mm->context.pgtable_list); +#endif return 0 ; }
@@ -97,13 +100,37 @@ void __destroy_context(int context_id) }EXPORT_SYMBOL_GPL (__destroy_context); +#ifdef CONFIG_PPC_64K_PAGES +static void destroy_pagetable_list (struct mm_struct *mm) +{ +struct page *page; +struct list_head *item, *tmp; + +list_for_each_safe (item, tmp, &mm->context.pgtable_list) { + page = list_entry(item, struct page, lru); +list_del (&page->lru); +pgtable_page_dtor (page); +atomic_set (&page->_mapcount,-1 ); +__free_page (page); + } +} +#else +static inline void destroy_pagetable_list (struct mm_struct *mm) +{ +return ; +} +#endif +void destroy_context (struct mm_struct *mm) { +#ifdef CONFIG_PPC_ICSWX drop_cop (mm->context.acop, mm);kfree (mm->context.cop_lockp); mm->context.cop_lockp =NULL ;#endif /* CONFIG_PPC_ICSWX */ + +destroy_pagetable_list (mm);__destroy_context (mm->context.id);subpage_prot_free (mm); mm->context.id =MMU_NO_CONTEXT ;
arch/powerpc/mm/pgtable_64.c +189 -0
198 lines not on this page · raw message
Signature · 7 lines
1.7.10 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC PATCH -V2 05/21] powerpc: Reduce PTE table memory wastage
Quoted 8 lines · Aneesh Kumar K.V
From: "Aneesh Kumar K.V" <[email protected]>
We now have PTE page consuming only 2K of the 64K page.This is in order to facilitate transparent huge page support, which works much better if our PMDs cover 16MB instead of 256MB.
Inorder to reduce the wastage, we now have multiple PTE page fragment from the same PTE page.
This needs a much better description of what you're doing here to manage the allocations. It's certainly not easy to figure out from the code.
[snip]
arch/powerpc/include/asm/page.h void arch_free_page(struct page *page, int order); · line 385
Quoted 5 lines
arch/powerpc/include/asm/page.h +4
-0+#ifdef CONFIG_PPC_64K_PAGES +typedef pte_t *pgtable_t ; +#else typedef struct page *pgtable_t ; +#endif
This looks really bogus. A pgtable_t is a pointer to PTEs on 64K, but a pointer to a struct page on 4k.
Signature · 4 lines
David Gibson | I'll have my music baroque, and my code david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_ | _way_ _around_! http://www.ozlabs.org/~dgibson
Re: [RFC PATCH -V2 05/21] powerpc: Reduce PTE table memory wastage
Quoted 7 lines · David Gibson
Quoted 6 lines · Aneesh Kumar K.V
From: "Aneesh Kumar K.V" <[email protected]>
We now have PTE page consuming only 2K of the 64K page.This is in order to facilitate transparent huge page support, which works much better if our PMDs cover 16MB instead of 256MB.
Quoted 6 lines
Quoted 2 lines
Inorder to reduce the wastage, we now have multiple PTE page fragment from the same PTE page.
This needs a much better description of what you're doing here to manage the allocations. It's certainly not easy to figure out from the code.
I will add more detailed description in the commit message.
We allocate one page for the last level of linux page table. With THP and large page size of 16MB, that would mean we are be wasting large part of that page. To map 16MB area, we only need a PTE space of 2K with 64K Page size. This patch reduce the space wastage by sharing the page allocated for the last level of linux page table with multiple pmd entries. We call these smaller chunks PTE page fragments and allocated page, PTE page. We use the page->_mapcount as bitmap to indicate which PTE fragments are free.
Quoted 12 lines
[snip]
arch/powerpc/include/asm/page.h void arch_free_page(struct page *page, int order); · line 385
Quoted 5 lines
arch/powerpc/include/asm/page.h +4
-0+#ifdef CONFIG_PPC_64K_PAGES +typedef pte_t *pgtable_t ; +#else typedef struct page *pgtable_t ; +#endif This looks really bogus. A
pgtable_tis a pointer to PTEs on 64K, but a pointer to a struct page on 4k.
We enable all the above only with 64K Pages.
-aneesh
Re: [RFC PATCH -V2 05/21] powerpc: Reduce PTE table memory wastage
In reply to Aneesh Kumar K.VQuoted 3 lines · Aneesh Kumar K.V
From: "Aneesh Kumar K.V" <[email protected]>
We now have PTE page consuming only 2K of the 64K page.This is in order to
In fact the PTE page together with the hash table indexes occupies 4k, doesn't it? The comments in the code are similarly confusing since they talk about 2k but actually allocate 4k.
Quoted 4 lines
facilitate transparent huge page support, which works much better if our PMDs cover 16MB instead of 256MB.
Inorder to reduce the wastage, we now have multiple PTE page fragment
^ In order (two words)
Quoted 1 line
from the same PTE page.
A patch like this needs a more complete description and explanation than you have given. For instance, you could mention that the code that you're adding for the 32-bit and non-64k cases are just copies of the previously generic code from pgalloc.h (actually, this movement might be something that could be split out as a separate patch). Also, you should describe in outline how you keep a list of pages that aren't fully allocated and have a bitmap of which 4k sections are in use, and also how your scheme interacts with RCU.
[snip]
arch/powerpc/mm/pgtable_64.c EXPORT_SYMBOL(__ioremap_at); · line 344
Quoted 3 lines
arch/powerpc/mm/pgtable_64.c +3
-0+#ifdef CONFIG_PPC_64K_PAGES +/* +* we support 15 fragments per PTE page. This is limited by how many
Why only 15? Don't we get 16 fragments per page?
Quoted 2 lines
+ * bits we can pack in
page->_mapcount. We use the first half for
+ * tracking the usage for rcu page table free.
What does "first" mean? The high half or the low half?
arch/powerpc/mm/pgtable_64.c EXPORT_SYMBOL(__ioremap_at); · line 373
Quoted 7 lines
arch/powerpc/mm/pgtable_64.c +7
-0+unsigned long *page_table_alloc (struct mm_struct *mm,unsigned long vmaddr) +{ +struct page *page; +unsigned int mask, bit; +unsigned long *table; + +/* Allocate fragments of a 4K page as 1K/2K page table */
A 4k page? Do you mean a 64k page? And what is 1K to do with anything?
Quoted 42 lines
arch/powerpc/mm/pgtable_64.c +42
-0+#ifdef CONFIG_SMP +static void __page_table_free_rcu (void *table) +{ +unsigned int bit; +struct page *page; +/* +* this is a PTE page free 2K page table +* fragment of a 64K page. +*/ + page =virt_to_page (table); + bit =1 << ((__pa (table) & ~PAGE_MASK ) /PTE_FRAG_SIZE ); + bit <<=FRAG_MASK_BITS ; +/* +* clear the higher half and if nobody used the page in +* between, even lower half would be zero. +*/ +if (atomic_xor_bits (&page->_mapcount, bit) ==0 ) { +pgtable_page_dtor (page); +atomic_set (&page->_mapcount,-1 ); +__free_page (page); + } +} + +static void page_table_free_rcu (struct mmu_gather *tlb,unsigned long *table) +{ +struct page *page; +struct mm_struct *mm; +unsigned int bit, mask; + + mm = tlb->mm; +/* Free 2K page table fragment of a 64K page */ + page =virt_to_page (table); + bit =1 << ((__pa (table) & ~PAGE_MASK ) /PTE_FRAG_SIZE ); +spin_lock (&mm->page_table_lock); +/* +* stash the actual mask in higher half, and clear the lower half +* and selectively, add remove from pgtable list +*/ + mask =atomic_xor_bits (&page->_mapcount, bit | (bit <<FRAG_MASK_BITS )); +if (!(mask &FRAG_MASK )) +list_del (&page->lru); +else {
arch/powerpc/mm/pgtable_64.c EXPORT_SYMBOL(__ioremap_at); · line 499
Quoted 10 lines
arch/powerpc/mm/pgtable_64.c +10
-0+/* +* Add the page table page to pgtable_list so that +* the free fragment can be used by the next alloc +*/ +list_del_init (&page->lru); +list_add_tail (&page->lru, &mm->context.pgtable_list); + } +spin_unlock (&mm->page_table_lock); +tlb_remove_table (tlb, table); +}
This looks like you're allowing a fragment that is being freed to be reallocated and used again during the grace period when we are waiting for any references to the fragment to disappear. Doesn't that allow a race where one CPU traversing the page table and using the fragment in its old location in the tree could see a PTE created after the fragment was reallocated? In other words, why is it safe to allow the fragment to be used during the grace period? If it is safe, it at least needs a comment explaining why.
Paul.
Re: [RFC PATCH -V2 05/21] powerpc: Reduce PTE table memory wastage
Paul Mackerras <[email protected]> writes:
I will reply to the other parts in a seperate email, but the below
Quoted 30 lines
Quoted 19 lines
arch/powerpc/mm/pgtable_64.c +19
-0+static void page_table_free_rcu (struct mmu_gather *tlb,unsigned long *table) +{ +struct page *page; +struct mm_struct *mm; +unsigned int bit, mask; + + mm = tlb->mm; +/* Free 2K page table fragment of a 64K page */ + page =virt_to_page (table); + bit =1 << ((__pa (table) & ~PAGE_MASK ) /PTE_FRAG_SIZE ); +spin_lock (&mm->page_table_lock); +/* +* stash the actual mask in higher half, and clear the lower half +* and selectively, add remove from pgtable list +*/ + mask =atomic_xor_bits (&page->_mapcount, bit | (bit <<FRAG_MASK_BITS )); +if (!(mask &FRAG_MASK )) +list_del (&page->lru); +else {arch/powerpc/mm/pgtable_64.c EXPORT_SYMBOL(__ioremap_at); · line 499
Quoted 10 lines
arch/powerpc/mm/pgtable_64.c +10
-0+/* +* Add the page table page to pgtable_list so that +* the free fragment can be used by the next alloc +*/ +list_del_init (&page->lru); +list_add_tail (&page->lru, &mm->context.pgtable_list); + } +spin_unlock (&mm->page_table_lock); +tlb_remove_table (tlb, table); +}
Quoted 9 lines
This looks like you're allowing a fragment that is being freed to be reallocated and used again during the grace period when we are waiting for any references to the fragment to disappear. Doesn't that allow a race where one CPU traversing the page table and using the fragment in its old location in the tree could see a PTE created after the fragment was reallocated? In other words, why is it safe to allow the fragment to be used during the grace period? If it is safe, it at least needs a comment explaining why.
We don't allow it to be reallocated during the grace period. The trick is in the below lines of page_table_alloc()
/* * Update with the higher order mask bits accumulated, * added as a part of rcu free. */ mask = mask | (mask >> FRAG_MASK_BITS);
When checking for mask, we also look at the higher order bits.
The reason we add the page back to &mm->context.pgtable_list in page_table_free_rcu is because we need to have access to struct mm_struct. We don't have that in the rcu call back. So we add early and make sure we don't reallocate them, until the grace period is over.
I will definitely add more comments around the code to clarify these details.
-aneesh
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC PATCH -V2 05/21] powerpc: Reduce PTE table memory wastage
In reply to Paul MackerrasQuoted 17 lines · Paul Mackerras
Quoted 3 lines · Aneesh Kumar K.V
From: "Aneesh Kumar K.V" <[email protected]>
We now have PTE page consuming only 2K of the 64K page.This is in order to
In fact the PTE page together with the hash table indexes occupies 4k, doesn't it? The comments in the code are similarly confusing since they talk about 2k but actually allocate 4k.
Quoted 4 lines
facilitate transparent huge page support, which works much better if our PMDs cover 16MB instead of 256MB.
Inorder to reduce the wastage, we now have multiple PTE page fragment
^ In order (two words)
Quoted 1 line
from the same PTE page.
Quoted 8 lines
A patch like this needs a more complete description and explanation than you have given. For instance, you could mention that the code that you're adding for the 32-bit and non-64k cases are just copies of the previously generic code from
pgalloc.h(actually, this movement might be something that could be split out as a separate patch). Also, you should describe in outline how you keep a list of pages that aren't fully allocated and have a bitmap of which 4k sections are in use, and also how your scheme interacts with RCU.
will do
Quoted 9 lines
[snip]
arch/powerpc/mm/pgtable_64.c EXPORT_SYMBOL(__ioremap_at); · line 344
Quoted 3 lines
arch/powerpc/mm/pgtable_64.c +3
-0+#ifdef CONFIG_PPC_64K_PAGES +/* +* we support 15 fragments per PTE page. This is limited by how many Why only 15? Don't we get 16 fragments per page?
That was one of the details I wanted to come back and closely look at before posting. But missed that in the excitement of getting this all working :). ._mapcount is a signed value and hence I was not sure whether setting the top bit have any impact on how we deal with the page in other part of VM.
Quoted 5 lines
Quoted 2 lines
+ * bits we can pack in
page->_mapcount. We use the first half for
+ * tracking the usage for rcu page table free.What does "first" mean? The high half or the low half?
high half.
Quoted 11 lines
arch/powerpc/mm/pgtable_64.c EXPORT_SYMBOL(__ioremap_at); · line 373
Quoted 7 lines
arch/powerpc/mm/pgtable_64.c +7
-0+unsigned long *page_table_alloc (struct mm_struct *mm,unsigned long vmaddr) +{ +struct page *page; +unsigned int mask, bit; +unsigned long *table; + +/* Allocate fragments of a 4K page as 1K/2K page table */ A 4k page? Do you mean a 64k page? And what is 1K to do with anything?
That should be completely dropped, Cut-paste from s390 code :)
Quoted 44 lines
Quoted 44 lines
arch/powerpc/mm/pgtable_64.c +44
-0+#ifdef CONFIG_SMP +static void __page_table_free_rcu (void *table) +{ +unsigned int bit; +struct page *page; +/* +* this is a PTE page free 2K page table +* fragment of a 64K page. +*/ + page =virt_to_page (table); + bit =1 << ((__pa (table) & ~PAGE_MASK ) /PTE_FRAG_SIZE ); + bit <<=FRAG_MASK_BITS ; +/* +* clear the higher half and if nobody used the page in +* between, even lower half would be zero. +*/ +if (atomic_xor_bits (&page->_mapcount, bit) ==0 ) { +pgtable_page_dtor (page); +atomic_set (&page->_mapcount,-1 ); +__free_page (page); + } +} + +static void page_table_free_rcu (struct mmu_gather *tlb,unsigned long *table) +{ +struct page *page; +struct mm_struct *mm; +unsigned int bit, mask; + + mm = tlb->mm; +/* Free 2K page table fragment of a 64K page */ + page =virt_to_page (table); + bit =1 << ((__pa (table) & ~PAGE_MASK ) /PTE_FRAG_SIZE ); +spin_lock (&mm->page_table_lock); +/* +* stash the actual mask in higher half, and clear the lower half +* and selectively, add remove from pgtable list +*/ + mask =atomic_xor_bits (&page->_mapcount, bit | (bit <<FRAG_MASK_BITS )); +if (!(mask &FRAG_MASK )) +list_del (&page->lru); +else { +/* +* Add the page table page to pgtable_list so that
Quoted 8 lines
arch/powerpc/mm/pgtable_64.c EXPORT_SYMBOL(__ioremap_at); · line 499
Quoted 8 lines
arch/powerpc/mm/pgtable_64.c +8
-0+* the free fragment can be used by the next alloc +*/ +list_del_init (&page->lru); +list_add_tail (&page->lru, &mm->context.pgtable_list); + } +spin_unlock (&mm->page_table_lock); +tlb_remove_table (tlb, table); +}
-aneesh
RFC PATCH 6/21 powerpc: Add size argument to pgtable_cache_add
In reply to Aneesh Kumar K.VFrom: "Aneesh Kumar K.V" <[email protected]>
We will use this later with THP changes. With THP we want to create PMD with twice the size. The second half will be used to depoist pgtable, which will carry the hpte hash index value
--- arch/powerpc/include/asm/pgtable-ppc64.h | 7 ++++++- arch/powerpc/mm/init_64.c | 16 ++++++++-------- 2 files changed, 14 insertions(+), 9 deletions(-)
arch/powerpc/include/asm/pgtable-ppc64.h +6 -1
@@ -338,8 +338,13 @@ static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry)#define pgoff_to_pte (off) ((pte_t) {((off) << PTE_RPN_SHIFT)|_PAGE_FILE})#define PTE_FILE_MAX_BITS (BITS_PER_LONG - PTE_RPN_SHIFT) -void pgtable_cache_add (unsigned shift,void (*ctor)(void *)); +extern void __pgtable_cache_add (unsigned index,unsigned long table_size, +void (*ctor)(void *));void pgtable_cache_init (void ); +static inline void pgtable_cache_add (unsigned shift,void (*ctor)(void *)) +{ +return __pgtable_cache_add (shift,sizeof (void *) << shift, ctor); +}/* * find_linux_pte returns the address of a linux pte for a given
arch/powerpc/mm/init_64.c +8 -8
@@ -100,10 +100,10 @@ struct kmem_cache *pgtable_cache[MAX_PGTABLE_INDEX_SIZE];* everything else. Caches created by this function are used for all * the higher level pagetables, and for hugepage pagetables. */ -void pgtable_cache_add (unsigned shift,void (*ctor)(void *)) +void __pgtable_cache_add (unsigned int index,unsigned long table_size, +void (*ctor)(void *)) {char *name; -unsigned long table_size =sizeof (void *) << shift;unsigned long align = table_size;/* When batching pgtable pointers for RCU freeing, we store
@@ -111,7 +111,7 @@ void pgtable_cache_add(unsigned shift, void (*ctor)(void *))* big enough to fit it. * * Likewise, hugeapge pagetable pointers contain a (different) -* shift value in the low bits. All tables must be aligned so +* huge page size in the low bits. All tables must be aligned so * as to leave enough 0 bits in the address to contain it. */ unsigned long minalign =max (MAX_PGTABLE_INDEX_SIZE +1 ,HUGEPD_SHIFT_MASK +1 );
@@ -121,17 +121,17 @@ void pgtable_cache_add(unsigned shift, void (*ctor)(void *))* moment, gcc doesn't seem to recognize is_power_of_2 as a * constant expression, so so much for that. */ BUG_ON (!is_power_of_2 (minalign)); -BUG_ON ((shift <1 ) || (shift >MAX_PGTABLE_INDEX_SIZE )); +BUG_ON ((index <1 ) || (index >MAX_PGTABLE_INDEX_SIZE )); -if (PGT_CACHE (shift)) +if (PGT_CACHE (index))return ;/* Already have a cache of this size */ align = max_t(unsigned long, align, minalign); - name =kasprintf (GFP_KERNEL ,"pgtable-2^%d" , shift); + name =kasprintf (GFP_KERNEL ,"pgtable-2^%d" , index); new =kmem_cache_create (name, table_size, align,0 , ctor); -PGT_CACHE (shift) = new; +PGT_CACHE (index) = new; -pr_debug ("Allocated pgtable cache for order %d\n" , shift); +pr_debug ("Allocated pgtable cache for order %d\n" , index); }
Signature · 7 lines
1.7.10 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC PATCH -V2 06/21] powerpc: Add size argument to pgtable_cache_add
Quoted 4 lines · Aneesh Kumar K.V
From: "Aneesh Kumar K.V" <[email protected]>
We will use this later with THP changes. With THP we want to create PMD with twice the size. The second half will be used to depoist pgtable, which will
^ deposit?
Quoted 1 line
carry the hpte hash index value
I'm not familiar with what "deposit" and "withdraw" mean in the THP context. If you can find a way to make the patch description more informative for people who are not completely familiar with THP (without adding a full-blown description of THP, of course) that would be good.
Paul.
RFC PATCH 7/21 powerpc: Use encode avpn where we need only avpn values
In reply to Aneesh Kumar K.VFrom: "Aneesh Kumar K.V" <[email protected]>
--- arch/powerpc/mm/hash_native_64.c | 8 ++++---- arch/powerpc/platforms/cell/beat_htab.c | 10 +++++----- arch/powerpc/platforms/ps3/htab.c | 2 +- 3 files changed, 10 insertions(+), 10 deletions(-)
arch/powerpc/mm/hash_native_64.c +4 -4
@@ -252,7 +252,7 @@ static long native_hpte_updatepp(unsigned long slot, unsigned long newpp,unsigned long hpte_v, want_v;int ret =0 ; - want_v =hpte_encode_v (vpn, psize, ssize); + want_v =hpte_encode_avpn (vpn, psize, ssize);DBG_LOW (" update(vpn=%016lx, avpnv=%016lx, group=%lx, newpp=%lx)" , vpn, want_v &HPTE_V_AVPN , slot, newpp);
@@ -288,7 +288,7 @@ static long native_hpte_find(unsigned long vpn, int psize, int ssize)unsigned long want_v, hpte_v; hash =hpt_hash (vpn, mmu_psize_defs[psize].shift, ssize); - want_v =hpte_encode_v (vpn, psize, ssize); + want_v =hpte_encode_avpn (vpn, psize, ssize);/* Bolted mappings are only ever in the primary group */ slot = (hash & htab_hash_mask) *HPTES_PER_GROUP ;
@@ -348,7 +348,7 @@ static void native_hpte_invalidate(unsigned long slot, unsigned long vpn,DBG_LOW (" invalidate(vpn=%016lx, hash: %lx)\n" , vpn, slot); - want_v =hpte_encode_v (vpn, psize, ssize); + want_v =hpte_encode_avpn (vpn, psize, ssize);native_lock_hpte (hptep); hpte_v = hptep->v;
@@ -520,7 +520,7 @@ static void native_flush_hash_range(unsigned long number, int local) slot = (hash & htab_hash_mask) *HPTES_PER_GROUP ; slot += hidx & _PTEIDX_GROUP_IX; hptep = htab_address + slot; - want_v =hpte_encode_v (vpn, psize, ssize); + want_v =hpte_encode_avpn (vpn, psize, ssize);native_lock_hpte (hptep); hpte_v = hptep->v; if (!HPTE_V_COMPARE(hpte_v, want_v) ||
arch/powerpc/platforms/cell/beat_htab.c +5 -5
@@ -191,7 +191,7 @@ static long beat_lpar_hpte_updatepp(unsigned long slot,u64 dummy0, dummy1;unsigned long want_v; - want_v =hpte_encode_v (vpn, psize,MMU_SEGSIZE_256M ); + want_v =hpte_encode_avpn (vpn, psize,MMU_SEGSIZE_256M ); DBG_LOW(" update: " "avpnv=%016lx, slot=%016lx, psize: %d, newpp %016lx ... ",
@@ -228,7 +228,7 @@ static long beat_lpar_hpte_find(unsigned long vpn, int psize)unsigned long want_v, hpte_v; hash =hpt_hash (vpn, mmu_psize_defs[psize].shift,MMU_SEGSIZE_256M ); - want_v =hpte_encode_v (vpn, psize,MMU_SEGSIZE_256M ); + want_v =hpte_encode_avpn (vpn, psize,MMU_SEGSIZE_256M );for (j =0 ; j <2 ; j++) { slot = (hash & htab_hash_mask) *HPTES_PER_GROUP ;
@@ -283,7 +283,7 @@ static void beat_lpar_hpte_invalidate(unsigned long slot, unsigned long vpn,DBG_LOW (" inval : slot=%lx, va=%016lx, psize: %d, local: %d\n" , slot, va, psize, local); - want_v =hpte_encode_v (vpn, psize,MMU_SEGSIZE_256M ); + want_v =hpte_encode_avpn (vpn, psize,MMU_SEGSIZE_256M );raw_spin_lock_irqsave (&beat_htab_lock, flags); dummy1 =beat_lpar_hpte_getword0 (slot);
@@ -372,7 +372,7 @@ static long beat_lpar_hpte_updatepp_v3(unsigned long slot,unsigned long want_v;unsigned long pss; - want_v =hpte_encode_v (vpn, psize,MMU_SEGSIZE_256M ); + want_v =hpte_encode_avpn (vpn, psize,MMU_SEGSIZE_256M ); pss = (psize ==MMU_PAGE_4K ) ?-1UL : mmu_psize_defs[psize].penc; DBG_LOW(" update: "
@@ -402,7 +402,7 @@ static void beat_lpar_hpte_invalidate_v3(unsigned long slot, unsigned long vpn,DBG_LOW (" inval : slot=%lx, vpn=%016lx, psize: %d, local: %d\n" , slot, vpn, psize, local); - want_v =hpte_encode_v (vpn, psize,MMU_SEGSIZE_256M ); + want_v =hpte_encode_avpn (vpn, psize,MMU_SEGSIZE_256M ); pss = (psize ==MMU_PAGE_4K ) ?-1UL : mmu_psize_defs[psize].penc; lpar_rc =beat_invalidate_htab_entry3 (0 , slot, want_v, pss);
arch/powerpc/platforms/ps3/htab.c +1 -1
@@ -115,7 +115,7 @@ static long ps3_hpte_updatepp(unsigned long slot, unsigned long newpp,unsigned long flags;long ret; - want_v =hpte_encode_v (vpn, psize, ssize); + want_v =hpte_encode_avpn (vpn, psize, ssize);spin_lock_irqsave (&ps3_htab_lock, flags);
Signature · 7 lines
1.7.10 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC PATCH -V2 07/21] powerpc: Use encode avpn where we need only avpn values
Quoted 3 lines · Aneesh Kumar K.V
From: "Aneesh Kumar K.V" <[email protected]>
Signed-off-by Aneesh Kumar K.V <[email protected]>
Needs a patch description. What is the motivation for doing this? Is the new code completely equivalent to the old, or if not, what are the differences? Etc.
Paul.
RFC PATCH 8/21 powerpc: Decode the pte-lp-encoding bits correctly.
In reply to Aneesh Kumar K.VFrom: "Aneesh Kumar K.V" <[email protected]>
We look at both the segment base page size and actual page size and store the pte-lp-encodings in an array per base page size.
--- arch/powerpc/include/asm/machdep.h | 3 +- arch/powerpc/include/asm/mmu-hash64.h | 30 +++++---- arch/powerpc/kvm/book3s_hv.c | 7 ++- arch/powerpc/mm/hash_low_64.S | 18 ++++-- arch/powerpc/mm/hash_native_64.c | 85 ++++++++++++++++--------- arch/powerpc/mm/hash_utils_64.c | 103 +++++++++++++++++++------------ arch/powerpc/mm/hugetlbpage-hash64.c | 4 +- arch/powerpc/platforms/cell/beat_htab.c | 16 ++--- arch/powerpc/platforms/ps3/htab.c | 6 +- arch/powerpc/platforms/pseries/lpar.c | 6 +- 10 files changed, 174 insertions(+), 104 deletions(-)
arch/powerpc/include/asm/machdep.h +2 -1
@@ -50,7 +50,8 @@ struct machdep_calls {unsigned long prpn, unsigned long rflags, unsigned long vflags, - int psize, int ssize); + int psize, int apsize, + int ssize);long (*hpte_remove)(unsigned long hpte_group);void (*hpte_removebolted)(unsigned long ea,int psize,int ssize);
arch/powerpc/include/asm/mmu-hash64.h +19 -11
@@ -154,7 +154,7 @@ extern unsigned long htab_hash_mask;struct mmu_psize_def {unsigned int shift;/* number of bits */ -unsigned int penc;/* HPTE encoding */ +unsigned int penc[MMU_PAGE_COUNT ];/* HPTE encoding */ unsigned int tlbiel;/* tlbiel supported for that page size */ unsigned long avpnm;/* bits to mask out in AVPN in the HPTE */ unsigned long sllp;/* SLB L||LP (exact mask to use in slbmte) */
@@ -181,6 +181,13 @@ struct mmu_psize_def*/ #define VPN_SHIFT 12 +/* +* HPTE LP details +*/ +#define LP_SHIFT 12 +#define LP_BITS 8 +#define LP_MASK (i) ((0xFF >> (i)) << LP_SHIFT) +#ifndef __ASSEMBLY__static inline int segment_shift (int ssize)
@@ -237,14 +244,14 @@ static inline unsigned long hpte_encode_avpn(unsigned long vpn, int psize,/* * This function sets the AVPN and L fields of the HPTE appropriately -* for the page size +* using the base page size and actual page size. */ -static inline unsigned long hpte_encode_v (unsigned long vpn, -int psize,int ssize) +static inline unsigned long hpte_encode_v (unsigned long vpn,int base_psize, +int actual_psize,int ssize) {unsigned long v; - v =hpte_encode_avpn (vpn, psize, ssize); -if (psize !=MMU_PAGE_4K ) + v =hpte_encode_avpn (vpn, base_psize, ssize); +if (actual_psize !=MMU_PAGE_4K ) v |=HPTE_V_LARGE ;return v; }
@@ -254,17 +261,18 @@ static inline unsigned long hpte_encode_v(unsigned long vpn,* for the page size. We assume the pa is already "clean" that is properly * aligned for the requested page size */ -static inline unsigned long hpte_encode_r (unsigned long pa,int psize) +static inline unsigned long hpte_encode_r (unsigned long pa,int base_psize, +int actual_psize) {unsigned long r;/* A 4K page needs no special encoding */ -if (psize ==MMU_PAGE_4K ) +if (actual_psize ==MMU_PAGE_4K )return pa &HPTE_R_RPN ;else { -unsigned int penc = mmu_psize_defs[psize].penc; -unsigned int shift = mmu_psize_defs[psize].shift; -return (pa & ~((1ul << shift) -1 )) | (penc <<12 ); +unsigned int penc = mmu_psize_defs[base_psize].penc[actual_psize]; +unsigned int shift = mmu_psize_defs[actual_psize].shift; +return (pa & ~((1ul << shift) -1 )) | (penc <<LP_SHIFT ); }return r; }
arch/powerpc/kvm/book3s_hv.c +6 -1
@@ -1515,7 +1515,12 @@ static void kvmppc_add_seg_page_size(struct kvm_ppc_one_seg_page_size **sps, (*sps)->page_shift = def->shift; (*sps)->slb_enc = def->sllp; (*sps)->enc[0 ].page_shift = def->shift; - (*sps)->enc[0 ].pte_enc = def->penc; +/* +* FIXME!! +* This is returned to user space. Do we need to +* return details of MPSS here ? +*/ + (*sps)->enc[0 ].pte_enc = def->penc[linux_psize]; (*sps)++; }
arch/powerpc/mm/hash_low_64.S +12 -6
@@ -196,7 +196,8 @@ htab_insert_pte: mr r4,r29 /* Retrieve vpn */ li r7,0 /* !bolted, !secondary */ li r8,MMU_PAGE_4K /* page size */ - ld r9,STK_PARAM(R9)(r1) /* segment size */ + li r9,MMU_PAGE_4K /* actual page size */ + ld r10,STK_PARAM(R9)(r1) /* segment size */ _GLOBAL(htab_call_hpte_insert1) bl . /* Patched by htab_finish_init() */ cmpdi 0,r3,0
@@ -219,7 +220,8 @@ _GLOBAL(htab_call_hpte_insert1) mr r4,r29 /* Retrieve vpn */ li r7,HPTE_V_SECONDARY /* !bolted, secondary */ li r8,MMU_PAGE_4K /* page size */ - ld r9,STK_PARAM(R9)(r1) /* segment size */ + li r9,MMU_PAGE_4K /* actual page size */ + ld r10,STK_PARAM(R9)(r1) /* segment size */ _GLOBAL(htab_call_hpte_insert2) bl . /* Patched by htab_finish_init() */ cmpdi 0,r3,0
@@ -515,7 +517,8 @@ htab_special_pfn: mr r4,r29 /* Retrieve vpn */ li r7,0 /* !bolted, !secondary */ li r8,MMU_PAGE_4K /* page size */ - ld r9,STK_PARAM(R9)(r1) /* segment size */ + li r9,MMU_PAGE_4K /* actual page size */ + ld r10,STK_PARAM(R9)(r1) /* segment size */ _GLOBAL(htab_call_hpte_insert1) bl . /* patched by htab_finish_init() */ cmpdi 0,r3,0
@@ -542,7 +545,8 @@ _GLOBAL(htab_call_hpte_insert1) mr r4,r29 /* Retrieve vpn */ li r7,HPTE_V_SECONDARY /* !bolted, secondary */ li r8,MMU_PAGE_4K /* page size */ - ld r9,STK_PARAM(R9)(r1) /* segment size */ + li r9,MMU_PAGE_4K /* actual page size */ + ld r10,STK_PARAM(R9)(r1) /* segment size */ _GLOBAL(htab_call_hpte_insert2) bl . /* patched by htab_finish_init() */ cmpdi 0,r3,0
@@ -840,7 +844,8 @@ ht64_insert_pte: mr r4,r29 /* Retrieve vpn */ li r7,0 /* !bolted, !secondary */ li r8,MMU_PAGE_64K - ld r9,STK_PARAM(R9)(r1) /* segment size */ + li r9,MMU_PAGE_64K /* actual page size */ + ld r10,STK_PARAM(R9)(r1) /* segment size */ _GLOBAL(ht64_call_hpte_insert1) bl . /* patched by htab_finish_init() */ cmpdi 0,r3,0
@@ -863,7 +868,8 @@ _GLOBAL(ht64_call_hpte_insert1) mr r4,r29 /* Retrieve vpn */ li r7,HPTE_V_SECONDARY /* !bolted, secondary */ li r8,MMU_PAGE_64K - ld r9,STK_PARAM(R9)(r1) /* segment size */ + li r9,MMU_PAGE_64K /* actual page size */ + ld r10,STK_PARAM(R9)(r1) /* segment size */ _GLOBAL(ht64_call_hpte_insert2) bl . /* patched by htab_finish_init() */ cmpdi 0,r3,0
arch/powerpc/mm/hash_native_64.c +57 -28
245 lines not on this page · raw message
arch/powerpc/mm/hash_utils_64.c +62 -41
156 lines not on this page · raw message
arch/powerpc/mm/hugetlbpage-hash64.c +2 -2
@@ -103,7 +103,7 @@ repeat:/* Insert into the hash table, primary slot */ slot = ppc_md.hpte_insert (hpte_group, vpn, pa, rflags,0 , - mmu_psize, ssize); + mmu_psize, mmu_psize, ssize);/* Primary is full, try the secondary */ if (unlikely (slot ==-1 )) {
@@ -111,7 +111,7 @@ repeat: HPTES_PER_GROUP) & ~0x7UL; slot = ppc_md.hpte_insert (hpte_group, vpn, pa, rflags,HPTE_V_SECONDARY , - mmu_psize, ssize); + mmu_psize, mmu_psize, ssize);if (slot ==-1 ) {if (mftb () &0x1 ) hpte_group = ((hash & htab_hash_mask) *
arch/powerpc/platforms/cell/beat_htab.c +8 -8
@@ -90,7 +90,7 @@ static inline unsigned int beat_read_mask(unsigned hpte_group)static long beat_lpar_hpte_insert (unsigned long hpte_group,unsigned long vpn,unsigned long pa,unsigned long rflags,unsigned long vflags, -int psize,int ssize) +int psize,int apsize,int ssize) {unsigned long lpar_rc;u64 hpte_v, hpte_r, slot;
@@ -103,9 +103,9 @@ static long beat_lpar_hpte_insert(unsigned long hpte_group,"rflags=%lx, vflags=%lx, psize=%d)\n" , hpte_group, va, pa, rflags, vflags, psize); - hpte_v =hpte_encode_v (vpn, psize,MMU_SEGSIZE_256M ) | + hpte_v =hpte_encode_v (vpn, psize, apsize,MMU_SEGSIZE_256M ) | vflags |HPTE_V_VALID ; - hpte_r =hpte_encode_r (pa, psize) | rflags; + hpte_r =hpte_encode_r (pa, psize, apsize) | rflags;if (!(vflags &HPTE_V_BOLTED ))DBG_LOW (" hpte_v=%016lx, hpte_r=%016lx\n" , hpte_v, hpte_r);
@@ -314,7 +314,7 @@ void __init hpte_init_beat(void)static long beat_lpar_hpte_insert_v3 (unsigned long hpte_group,unsigned long vpn,unsigned long pa,unsigned long rflags,unsigned long vflags, -int psize,int ssize) +int psize,int apsize,int ssize) {unsigned long lpar_rc;u64 hpte_v, hpte_r, slot;
@@ -327,9 +327,9 @@ static long beat_lpar_hpte_insert_v3(unsigned long hpte_group,"rflags=%lx, vflags=%lx, psize=%d)\n" , hpte_group, vpn, pa, rflags, vflags, psize); - hpte_v =hpte_encode_v (vpn, psize,MMU_SEGSIZE_256M ) | + hpte_v =hpte_encode_v (vpn, psize, apsize,MMU_SEGSIZE_256M ) | vflags |HPTE_V_VALID ; - hpte_r =hpte_encode_r (pa, psize) | rflags; + hpte_r =hpte_encode_r (pa, psize, apsize) | rflags;if (!(vflags &HPTE_V_BOLTED ))DBG_LOW (" hpte_v=%016lx, hpte_r=%016lx\n" , hpte_v, hpte_r);
@@ -373,7 +373,7 @@ static long beat_lpar_hpte_updatepp_v3(unsigned long slot,unsigned long pss; want_v =hpte_encode_avpn (vpn, psize,MMU_SEGSIZE_256M ); - pss = (psize ==MMU_PAGE_4K ) ?-1UL : mmu_psize_defs[psize].penc; + pss = (psize ==MMU_PAGE_4K ) ?-1UL : mmu_psize_defs[psize].penc[psize]; DBG_LOW(" update: " "avpnv=%016lx, slot=%016lx, psize: %d, newpp %016lx ... ",
@@ -403,7 +403,7 @@ static void beat_lpar_hpte_invalidate_v3(unsigned long slot, unsigned long vpn,DBG_LOW (" inval : slot=%lx, vpn=%016lx, psize: %d, local: %d\n" , slot, vpn, psize, local); want_v =hpte_encode_avpn (vpn, psize,MMU_SEGSIZE_256M ); - pss = (psize ==MMU_PAGE_4K ) ?-1UL : mmu_psize_defs[psize].penc; + pss = (psize ==MMU_PAGE_4K ) ?-1UL : mmu_psize_defs[psize].penc[psize]; lpar_rc =beat_invalidate_htab_entry3 (0 , slot, want_v, pss);
arch/powerpc/platforms/ps3/htab.c +3 -3
@@ -45,7 +45,7 @@ static DEFINE_SPINLOCK(ps3_htab_lock);static long ps3_hpte_insert (unsigned long hpte_group,unsigned long vpn,unsigned long pa,unsigned long rflags,unsigned long vflags, -int psize,int ssize) +int psize,int apsize,int ssize) {int result;u64 hpte_v, hpte_r;
@@ -61,8 +61,8 @@ static long ps3_hpte_insert(unsigned long hpte_group, unsigned long vpn,*/ vflags &= ~HPTE_V_SECONDARY ; - hpte_v =hpte_encode_v (vpn, psize, ssize) | vflags |HPTE_V_VALID ; - hpte_r =hpte_encode_r (ps3_mm_phys_to_lpar (pa), psize) | rflags; + hpte_v =hpte_encode_v (vpn, psize, apsize, ssize) | vflags |HPTE_V_VALID ; + hpte_r =hpte_encode_r (ps3_mm_phys_to_lpar (pa), psize, apsize) | rflags;spin_lock_irqsave (&ps3_htab_lock, flags);
arch/powerpc/platforms/pseries/lpar.c +3 -3
@@ -109,7 +109,7 @@ void vpa_init(int cpu)static long pSeries_lpar_hpte_insert (unsigned long hpte_group,unsigned long vpn,unsigned long pa,unsigned long rflags,unsigned long vflags, -int psize,int ssize) +int psize,int apsize,int ssize) {unsigned long lpar_rc;unsigned long flags;
@@ -121,8 +121,8 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,"pa=%016lx, rflags=%lx, vflags=%lx, psize=%d)\n" , hpte_group, vpn, pa, rflags, vflags, psize); - hpte_v =hpte_encode_v (vpn, psize, ssize) | vflags |HPTE_V_VALID ; - hpte_r =hpte_encode_r (pa, psize) | rflags; + hpte_v =hpte_encode_v (vpn, psize, apsize, ssize) | vflags |HPTE_V_VALID ; + hpte_r =hpte_encode_r (pa, psize, apsize) | rflags;if (!(vflags &HPTE_V_BOLTED ))pr_devel (" hpte_v=%016lx, hpte_r=%016lx\n" , hpte_v, hpte_r);
Signature · 7 lines
1.7.10 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC PATCH -V2 08/21] powerpc: Decode the pte-lp-encoding bits correctly.
Quoted 6 lines · Aneesh Kumar K.V
From: "Aneesh Kumar K.V" <[email protected]>
We look at both the segment base page size and actual page size and store the pte-lp-encodings in an array per base page size.
Signed-off-by Aneesh Kumar K.V <[email protected]>
This needs more than 2 lines of patch description. In fact what you're doing is adding general mixed page-size segment (MPSS) support. Doing this should mean that you can also get rid of the MMU_PAGE_64K_AP value from the list in asm/mmu.h.
arch/powerpc/include/asm/mmu-hash64.h extern unsigned long htab_hash_mask; · line 157
Quoted 5 lines
struct
mmu_psize_def
{arch/powerpc/include/asm/mmu-hash64.h +1
-1unsigned int shift;/* number of bits */ -unsigned int penc;/* HPTE encoding */ +unsigned int penc[MMU_PAGE_COUNT ];/* HPTE encoding */
I guess this is reasonable, though adding space for 14 page size encodings seems a little bit over the top. Also, you don't seem to have any way to indicate which encodings are valid, since 0 is a valid encoding. Maybe you need to add a valid bit higher up to indicate which page sizes are valid.
arch/powerpc/kvm/book3s_hv.c static void kvmppc_add_seg_page_size(struct kvm_ppc_one_seg_page_size **sps, · line 1521
Quoted 13 lines
arch/powerpc/kvm/book3s_hv.c +4
-1@@ -1515,7 +1515,12 @@ static void kvmppc_add_seg_page_size(struct kvm_ppc_one_seg_page_size **sps, (*sps)->page_shift = def->shift; (*sps)->slb_enc = def->sllp; (*sps)->enc[0 ].page_shift = def->shift; - (*sps)->enc[0 ].pte_enc = def->penc; +/* +* FIXME!! +* This is returned to user space. Do we need to +* return details of MPSS here ?
Yes, we do, probably a separate entry for each valid base/actual page size pair.
arch/powerpc/kvm/book3s_hv.c static void kvmppc_add_seg_page_size(struct kvm_ppc_one_seg_page_size **sps,
Quoted 6 lines
arch/powerpc/kvm/book3s_hv.c +6
-0+static inline int hpte_actual_psize (struct hash_pte *hptep,int psize) +{ +unsigned int mask; +int i, penc, shift; +/* Look at the 8 bit LP value */ +unsigned int lp = (hptep->r >>LP_SHIFT ) & ((1 << (LP_BITS +1 )) -1 );
Why LP_BITS + 1 here? You seem to be extracting and comparing 9 bits rather than 8. Why is that?
arch/powerpc/kvm/book3s_hv.c static void hpte_decode(struct hash_pte *hpte, unsigned long slot, · line 427
Quoted 10 lines
arch/powerpc/kvm/book3s_hv.c +3
-3@@ -395,12 +422,13 @@ static void hpte_decode(struct hash_pte *hpte, unsigned long slot,/* valid entries have a shift value */ if (!mmu_psize_defs[size].shift)continue ; - -if (penc == mmu_psize_defs[size].penc) -break ; +for (a_size =0 ; a_size <MMU_PAGE_COUNT ; a_size++) +if (penc == mmu_psize_defs[size].penc[a_size]) + goto out;
I think this will get false matches due to unused/invalid entries in mmu_psize_defs[size].penc[] containing 0.
Paul.
Re: [RFC PATCH -V2 08/21] powerpc: Decode the pte-lp-encoding bits correctly.
Quoted 6 lines · Paul Mackerras
Quoted 5 lines · Aneesh Kumar K.V
From: "Aneesh Kumar K.V" <[email protected]>
We look at both the segment base page size and actual page size and store the pte-lp-encodings in an array per base page size.
Quoted 7 lines
Quoted 1 line
Signed-off-by Aneesh Kumar K.V <[email protected]>This needs more than 2 lines of patch description. In fact what you're doing is adding general mixed page-size segment (MPSS) support. Doing this should mean that you can also get rid of the
MMU_PAGE_64K_APvalue from the list inasm/mmu.h.
Can you elaborate on Admixed pages ? I was not able to find more info on that.
Quoted 12 lines
arch/powerpc/include/asm/mmu-hash64.h extern unsigned long htab_hash_mask; · line 157
Quoted 5 lines
struct
mmu_psize_def
{arch/powerpc/include/asm/mmu-hash64.h +1
-1unsigned int shift;/* number of bits */ -unsigned int penc;/* HPTE encoding */ +unsigned int penc[MMU_PAGE_COUNT ];/* HPTE encoding */ I guess this is reasonable, though adding space for 14 page size encodings seems a little bit over the top. Also, you don't seem to have any way to indicate which encodings are valid, since 0 is a valid encoding. Maybe you need to add a valid bit higher up to indicate which page sizes are valid.
how about penc = { [0 ... MMU_PAGE_COUNT] = -1 } ?, that would make sure we set all the bits for invalid entries.
Quoted 8 lines
Quoted 8 lines
arch/powerpc/kvm/book3s_hv.c +0
-0@@ -1515,7 +1515,12 @@ static void kvmppc_add_seg_page_size(struct kvm_ppc_one_seg_page_size **sps, (*sps)->page_shift = def->shift; (*sps)->slb_enc = def->sllp; (*sps)->enc[0 ].page_shift = def->shift;
Quoted 9 lines
arch/powerpc/kvm/book3s_hv.c static void kvmppc_add_seg_page_size(struct kvm_ppc_one_seg_page_size **sps, · line 1521
Quoted 5 lines
arch/powerpc/kvm/book3s_hv.c +4
-1- (*sps)->enc[0 ].pte_enc = def->penc; +/* +* FIXME!! +* This is returned to user space. Do we need to +* return details of MPSS here ? Yes, we do, probably a separate entry for each valid base/actual page size pair.
Ok will do new entries to enc for valid actual page size supported.
for 16MB actual page size
enc[1].page_shift = 24
enc[1].page_shift = x
should this be a seperate patch ?
Quoted 10 lines
arch/powerpc/kvm/book3s_hv.c static void kvmppc_add_seg_page_size(struct kvm_ppc_one_seg_page_size **sps,
Quoted 6 lines
arch/powerpc/kvm/book3s_hv.c +6
-0+static inline int hpte_actual_psize (struct hash_pte *hptep,int psize) +{ +unsigned int mask; +int i, penc, shift; +/* Look at the 8 bit LP value */ +unsigned int lp = (hptep->r >>LP_SHIFT ) & ((1 << (LP_BITS +1 )) -1 );Why
LP_BITS+ 1 here? You seem to be extracting and comparing 9 bits rather than 8. Why is that?
My mistake. Will fix
Quoted 5 lines
Quoted 5 lines
arch/powerpc/kvm/book3s_hv.c +0
-1@@ -395,12 +422,13 @@ static void hpte_decode(struct hash_pte *hpte, unsigned long slot,/* valid entries have a shift value */ if (!mmu_psize_defs[size].shift)continue ; -
Quoted 8 lines
arch/powerpc/kvm/book3s_hv.c static void hpte_decode(struct hash_pte *hpte, unsigned long slot, · line 427
Quoted 5 lines
arch/powerpc/kvm/book3s_hv.c +3
-2-if (penc == mmu_psize_defs[size].penc) -break ; +for (a_size =0 ; a_size <MMU_PAGE_COUNT ; a_size++) +if (penc == mmu_psize_defs[size].penc[a_size]) + goto out;I think this will get false matches due to unused/invalid entries in mmu_psize_defs[size].penc[] containing 0.
Will set the invalid value to 0xff.
-aneesh
Re: [RFC PATCH -V2 08/21] powerpc: Decode the pte-lp-encoding bits correctly.
In reply to Paul MackerrasQuoted 18 lines · Paul Mackerras
Quoted 6 lines
arch/powerpc/kvm/book3s_hv.c +0
-0arch/powerpc/kvm/book3s_hv.c static void kvmppc_add_seg_page_size(struct kvm_ppc_one_seg_page_size **sps, · line 1521
Quoted 8 lines
arch/powerpc/kvm/book3s_hv.c +4
-1@@ -1515,7 +1515,12 @@ static void kvmppc_add_seg_page_size(struct kvm_ppc_one_seg_page_size **sps, (*sps)->page_shift = def->shift; (*sps)->slb_enc = def->sllp; (*sps)->enc[0 ].page_shift = def->shift; - (*sps)->enc[0 ].pte_enc = def->penc; +/* +* FIXME!! +* This is returned to user space. Do we need to +* return details of MPSS here ? Yes, we do, probably a separate entry for each valid base/actual page size pair.
How about
commit fb7bca460d5e3a517dce24c0fe28cc94ffde37fa
Author: Aneesh Kumar K.V <[email protected]> Date: Sun Feb 24 22:55:38 2013 +0530
powerpc: Return all the valid pte ecndoing in KVM_PPC_GET_SMMU_INFO ioctl
arch/powerpc/kvm/book3s_hv.c +9 -2
@@ -1508,14 +1508,21 @@ long kvm_vm_ioctl_allocate_rma(struct kvm *kvm, struct kvm_allocate_rma *ret)static void kvmppc_add_seg_page_size (struct kvm_ppc_one_seg_page_size **sps,int linux_psize) { +int i, index =0 ;struct mmu_psize_def *def = &mmu_psize_defs[linux_psize];if (!def->shift)return ; (*sps)->page_shift = def->shift; (*sps)->slb_enc = def->sllp; - (*sps)->enc[0 ].page_shift = def->shift; - (*sps)->enc[0 ].pte_enc = def->penc[linux_psize]; +for (i =0 ; i <MMU_PAGE_COUNT ; i++) { +if ((signed int )def->penc[i] !=-1 ) { +BUG_ON (index >=KVM_PPC_PAGE_SIZES_MAX_SZ ); + (*sps)->enc[index].page_shift = mmu_psize_defs[i].shift; + (*sps)->enc[index].pte_enc = def->penc[i]; + index++; + } + } (*sps)++; }
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
RFC PATCH 9/21 powerpc: Update tlbie/tlbiel as per ISA doc
In reply to Aneesh Kumar K.VFrom: "Aneesh Kumar K.V" <[email protected]>
This make sure we handle Multiple page size segment correctly.
--- arch/powerpc/mm/hash_native_64.c | 52 +++++++++++++++++++++++++++++--------- 1 file changed, 40 insertions(+), 12 deletions(-)
arch/powerpc/mm/hash_native_64.c +40 -12
@@ -39,7 +39,7 @@DEFINE_RAW_SPINLOCK (native_tlbie_lock); -static inline void __tlbie (unsigned long vpn,int psize,int apsize,int ssize) +static inline void __tlbie (unsigned long vpn,int bpsize,int apsize,int ssize) {unsigned long va;unsigned int penc;
@@ -59,19 +59,33 @@ static inline void __tlbie(unsigned long vpn, int psize, int apsize, int ssize)*/ va &= ~(0xffffULL <<48 ); -switch (psize) { +switch (bpsize) {case MMU_PAGE_4K : +/* clear out bits after (52) [0....52.....63] */ + va &= ~((1ul << (64 -52 )) -1 ); va |= ssize <<8 ; + va |= mmu_psize_defs[apsize].sllp <<6 ; asm volatile(ASM_FTR_IFCLR("tlbie %0,0", PPC_TLBIE(%1,%0), %2) : : "r" (va), "r"(0), "i" (CPU_FTR_ARCH_206) : "memory");break ;default :/* We need 14 to 14 + i bits of va */ - penc = mmu_psize_defs[psize].penc[apsize]; - va &= ~((1ul << mmu_psize_defs[psize].shift) -1 ); + penc = mmu_psize_defs[bpsize].penc[apsize]; +/* clear out bits after (44) [0....44.....63] */ + va &= ~((1ul << (64 -44 )) -1 ); va |= penc <<12 ; va |= ssize <<8 ; +/* Add AVAL part */ +if (bpsize != apsize) { +/* +* MPSS, 64K base page size and 16MB parge page size +* We don't need all the bits, but this seems to work. +* vpn cover upto 65 bits of va. (0...65) and we need +* 56..62 bits of va. +*/ + va |= ((vpn >>2 ) &0xfe ); + } va |=1 ;/* L */ asm volatile(ASM_FTR_IFCLR("tlbie %0,1", PPC_TLBIE(%1,%0), %2) : : "r" (va), "r"(0), "i" (CPU_FTR_ARCH_206)
@@ -80,7 +94,7 @@ static inline void __tlbie(unsigned long vpn, int psize, int apsize, int ssize) } } -static inline void __tlbiel (unsigned long vpn,int psize,int apsize,int ssize) +static inline void __tlbiel (unsigned long vpn,int bpsize,int apsize,int ssize) {unsigned long va;unsigned int penc;
@@ -94,18 +108,32 @@ static inline void __tlbiel(unsigned long vpn, int psize, int apsize, int ssize)*/ va &= ~(0xffffULL <<48 ); -switch (psize) { +switch (bpsize) {case MMU_PAGE_4K : +/* clear out bits after(52) [0....52.....63] */ + va &= ~((1ul << (64 -52 )) -1 ); va |= ssize <<8 ; + va |= mmu_psize_defs[apsize].sllp <<6 ; asmvolatile (".long 0x7c000224 | (%0 << 11) | (0 << 21)" : :"r" (va) :"memory" );break ;default :/* We need 14 to 14 + i bits of va */ - penc = mmu_psize_defs[psize].penc[apsize]; - va &= ~((1ul << mmu_psize_defs[psize].shift) -1 ); + penc = mmu_psize_defs[bpsize].penc[apsize]; +/* clear out bits after(44) [0....44.....63] */ + va &= ~((1ul << (64 -44 )) -1 ); va |= penc <<12 ; va |= ssize <<8 ; +/* Add AVAL part */ +if (bpsize != apsize) { +/* +* MPSS, 64K base page size and 16MB parge page size +* We don't need all the bits, but this seems to work. +* vpn cover upto 65 bits of va. (0...65) and we need +* 56..62 bits of va. +*/ + va |= ((vpn >>2 ) &0xfe ); + } va |=1 ;/* L */ asmvolatile (".long 0x7c000224 | (%0 << 11) | (1 << 21)" : :"r" (va) :"memory" );
@@ -114,22 +142,22 @@ static inline void __tlbiel(unsigned long vpn, int psize, int apsize, int ssize) } -static inline void tlbie (unsigned long vpn,int psize,int apsize, +static inline void tlbie (unsigned long vpn,int bpsize,int apsize,int ssize,int local) {unsigned int use_local = local &&mmu_has_feature (MMU_FTR_TLBIEL );int lock_tlbie = !mmu_has_feature (MMU_FTR_LOCKLESS_TLBIE );if (use_local) - use_local = mmu_psize_defs[psize].tlbiel; + use_local = mmu_psize_defs[bpsize].tlbiel;if (lock_tlbie && !use_local)raw_spin_lock (&native_tlbie_lock); asmvolatile ("ptesync" : : :"memory" );if (use_local) { -__tlbiel (vpn, psize, apsize, ssize); +__tlbiel (vpn, bpsize, apsize, ssize); asmvolatile ("ptesync" : : :"memory" ); }else { -__tlbie (vpn, psize, apsize, ssize); +__tlbie (vpn, bpsize, apsize, ssize); asmvolatile ("eieio; tlbsync; ptesync" : : :"memory" ); }if (lock_tlbie && !use_local)
Signature · 1 line
1.7.10
RFC PATCH 10/21 powerpc: print both base and actual page size on hash failure
In reply to Aneesh Kumar K.VFrom: "Aneesh Kumar K.V" <[email protected]>
--- arch/powerpc/include/asm/mmu-hash64.h | 3 ++- arch/powerpc/mm/hash_utils_64.c | 12 +++++++----- arch/powerpc/mm/hugetlbpage-hash64.c | 2 +- 3 files changed, 10 insertions(+), 7 deletions(-)
arch/powerpc/include/asm/mmu-hash64.h +2 -1
@@ -327,7 +327,8 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid, unsigned int shift, unsigned int mmu_psize);extern void hash_failure_debug (unsigned long ea,unsigned long access,unsigned long vsid,unsigned long trap, -int ssize,int psize,unsigned long pte); +int ssize,int psize,int lpsize, +unsigned long pte);extern int htab_bolt_mapping (unsigned long vstart,unsigned long vend,unsigned long pstart,unsigned long prot,int psize,int ssize);
arch/powerpc/mm/hash_utils_64.c +7 -5
@@ -917,14 +917,14 @@ static inline int subpage_protection(struct mm_struct *mm, unsigned long ea)void hash_failure_debug (unsigned long ea,unsigned long access,unsigned long vsid,unsigned long trap, -int ssize,int psize,unsigned long pte) +int ssize,int psize,int lpsize,unsigned long pte) {if (!printk_ratelimit ())return ;pr_info ("mm: Hashing failure ! EA=0x%lx access=0x%lx current=%s\n" , ea, access, current->comm); -pr_info (" trap=0x%lx vsid=0x%lx ssize=%d psize=%d pte=0x%lx\n" , - trap, vsid, ssize, psize, pte); +pr_info (" trap=0x%lx vsid=0x%lx ssize=%d base psize=%d psize %d pte=0x%lx\n" , + trap, vsid, ssize, psize, lpsize, pte); }/* Result code is:
@@ -1097,7 +1097,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)*/ if (rc ==-1 )hash_failure_debug (ea, access, vsid, trap, ssize, psize, -pte_val (*ptep)); + psize,pte_val (*ptep));#ifndef CONFIG_PPC_64K_PAGES DBG_LOW (" o-pte: %016lx\n" ,pte_val (*ptep));#else
@@ -1175,7 +1175,9 @@ void hash_preload(struct mm_struct *mm, unsigned long ea,*/ if (rc ==-1 )hash_failure_debug (ea, access, vsid, trap, ssize, - mm->context.user_psize,pte_val (*ptep)); + mm->context.user_psize, + mm->context.user_psize, +pte_val (*ptep));local_irq_restore (flags); }
arch/powerpc/mm/hugetlbpage-hash64.c +1 -1
@@ -129,7 +129,7 @@ repeat:if (unlikely (slot ==-2 )) { *ptep =__pte (old_pte);hash_failure_debug (ea, access, vsid, trap, ssize, - mmu_psize, old_pte); + mmu_psize, mmu_psize, old_pte);return -1 ; }
Signature · 7 lines
1.7.10 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
RFC PATCH 11/21 powerpc: Print page size info during boot
In reply to Aneesh Kumar K.VFrom: "Aneesh Kumar K.V" <[email protected]>
This gives hint about different base and actual page size combination supported by the platform.
--- arch/powerpc/mm/hash_utils_64.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
arch/powerpc/mm/hash_utils_64.c +5 -5
@@ -314,7 +314,7 @@ static int __init htab_dt_scan_page_sizes(unsigned long node, prop = (u32 *)of_get_flat_dt_prop (node,"ibm,segment-page-sizes" , &size);if (prop !=NULL ) { -DBG ("Page sizes from device-tree:\n" ); +pr_info ("Page sizes from device-tree:\n" ); size /=4 ; cur_cpu_spec->mmu_features &= ~(MMU_FTR_16M_PAGE );while (size >0 ) {
@@ -364,10 +364,10 @@ static int __init htab_dt_scan_page_sizes(unsigned long node,continue ; def->penc[idx] = penc; -DBG (" %d: shift=%02x, sllp=%04lx, " -"avpnm=%08lx, tlbiel=%d, penc=%d\n" , - idx, shift, def->sllp, def->avpnm, - def->tlbiel, def->penc[idx]); +pr_info ("base_shift=%d: shift=%d, sllp=0x%04lx," +" avpnm=0x%08lx, tlbiel=%d, penc=%d\n" , + base_shift, shift, def->sllp, + def->avpnm, def->tlbiel, def->penc[idx]); } }return 1 ;
Signature · 7 lines
1.7.10 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
RFC PATCH 12/21 powerpc: Fix hpte_decode to use the correct decoding for page sizes
In reply to Aneesh Kumar K.VFrom: "Aneesh Kumar K.V" <[email protected]>
As per ISA doc, we encode base and actual page size in the LP bits of PTE. The number of bit used to encode the page sizes depend on actual page size. ISA doc lists this as
PTE LP actual page size
rrrr rrrz a?JPY8KB
rrrr rrzz a?JPY16KB
rrrr rzzz a?JPY32KB
rrrr zzzz a?JPY64KB
rrrz zzzz a?JPY128KB
rrzz zzzz a?JPY256KB
rzzz zzzz a?JPY512KB
zzzz zzzz a?JPY1MB
ISA doc also says
"The values of the a??za?? bits used to specify each size, along with all possible values of a??ra?? bits in the LP field, must result in LP values distinct from other LP values for other sizes."
based on the above update hpte_decode to use the correct decoding for LP bits.
--- arch/powerpc/mm/hash_native_64.c | 27 +++++++++++++++++---------- 1 file changed, 17 insertions(+), 10 deletions(-)
arch/powerpc/mm/hash_native_64.c +17 -10
@@ -428,19 +428,15 @@ static void hpte_decode(struct hash_pte *hpte, unsigned long slot, int *psize, int *apsize, int *ssize, unsigned long *vpn) { unsigned long avpn, pteg, vpi; -unsigned long hpte_r = hpte->r;unsigned long hpte_v = hpte->v;unsigned long vsid, seg_off; -int i, size, a_size =MMU_PAGE_4K , shift, penc; +int size, a_size =MMU_PAGE_4K , shift, mask; +/* Look at the 8 bit LP value */ +unsigned int lp = (hpte->r >>LP_SHIFT ) & ((1 << (LP_BITS +1 )) -1 );if (!(hpte_v &HPTE_V_LARGE )) size =MMU_PAGE_4K ;else { -for (i =0 ; i <LP_BITS ; i++) { -if ((hpte_r &LP_MASK (i+1 )) ==LP_MASK (i+1 )) -break ; - } - penc =LP_MASK (i+1 ) >>LP_SHIFT ;for (size =0 ; size <MMU_PAGE_COUNT ; size++) {/* 4K pages are not represented by LP */
@@ -450,12 +446,23 @@ static void hpte_decode(struct hash_pte *hpte, unsigned long slot,/* valid entries have a shift value */ if (!mmu_psize_defs[size].shift)continue ; -for (a_size =0 ; a_size <MMU_PAGE_COUNT ; a_size++) -if (penc == mmu_psize_defs[size].penc[a_size]) + +for (a_size =0 ; a_size <MMU_PAGE_COUNT ; a_size++) { +/* valid entries have a shift value */ +if (!mmu_psize_defs[a_size].shift) +continue ; + + shift = mmu_psize_defs[a_size].shift -11 ; +if (shift >9 ) + shift =9 ; + mask = (1 << shift) -1 ; +if ((lp & mask) == + mmu_psize_defs[size].penc[a_size]) { goto out; + } + } } } - out:/* This works for all page sizes, and for 256M and 1T segments */ *ssize = hpte_v >>HPTE_V_SSIZE_SHIFT ;
Signature · 7 lines
1.7.10 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
RFC PATCH 13/21 mm/THP: HPAGE_SHIFT is not a #define on some arch
In reply to Aneesh Kumar K.VFrom: "Aneesh Kumar K.V" <[email protected]>
On archs like powerpc that support different huge page sizes, HPAGE_SHIFT and other derived values like HPAGE_PMD_ORDER are not constants. So move that to hugepage_init
--- include/linux/huge_mm.h | 3 --- mm/huge_memory.c | 9 ++++++--- 2 files changed, 6 insertions(+), 6 deletions(-)
include/linux/huge_mm.h +0 -3
@@ -119,9 +119,6 @@ extern void __split_huge_page_pmd(struct vm_area_struct *vma, }while (0 ) extern void split_huge_page_pmd_mm(struct mm_struct *mm, unsigned long address,pmd_t *pmd); -#if HPAGE_PMD_ORDER >MAX_ORDER -#error "hugepages can't be allocated by the buddy allocator" -#endif extern int hugepage_madvise (struct vm_area_struct *vma,unsigned long *vm_flags,int advice); extern void __vma_adjust_trans_huge(struct vm_area_struct *vma,
mm/huge_memory.c +6 -3
@@ -44,7 +44,7 @@ unsigned long transparent_hugepage_flags __read_mostly = (1 <<TRANSPARENT_HUGEPAGE_USE_ZERO_PAGE_FLAG );/* default scan 8*512 pte (or vmas) every 30 second */ -static unsigned int khugepaged_pages_to_scan__read_mostly =HPAGE_PMD_NR *8 ; +static unsigned int khugepaged_pages_to_scan__read_mostly ;static unsigned int khugepaged_pages_collapsed;static unsigned int khugepaged_full_scans;static unsigned int khugepaged_scan_sleep_millisecs__read_mostly =10000 ;
@@ -59,7 +59,7 @@ static DECLARE_WAIT_QUEUE_HEAD(khugepaged_wait);* it would have happened if the vma was large enough during page * fault. */ -static unsigned int khugepaged_max_ptes_none__read_mostly =HPAGE_PMD_NR -1 ; +static unsigned int khugepaged_max_ptes_none__read_mostly ;static int khugepaged (void *none);static int mm_slots_hash_init (void );
@@ -621,11 +621,14 @@ static int __init hugepage_init(void)int err;struct kobject *hugepage_kobj; -if (!has_transparent_hugepage ()) { +if (!has_transparent_hugepage () || (HPAGE_PMD_ORDER >MAX_ORDER )) { transparent_hugepage_flags =0 ;return -EINVAL ; } + khugepaged_pages_to_scan =HPAGE_PMD_NR *8 ; + khugepaged_max_ptes_none =HPAGE_PMD_NR -1 ; + err =hugepage_init_sysfs (&hugepage_kobj);if (err)return err;
Signature · 1 line
1.7.10
RFC PATCH 14/21 mm/THP: Add pmd args to pgtable deposit and withdraw APIs
In reply to Aneesh Kumar K.VFrom: "Aneesh Kumar K.V" <[email protected]>
This will be later used by powerpc THP support. In powerpc we want to use pgtable for storing the hash index values. So instead of adding them to mm_context list, we would like to store them in the second half of pmd
--- arch/s390/include/asm/pgtable.h | 5 +++-- arch/s390/mm/pgtable.c | 5 +++-- arch/sparc/include/asm/pgtable_64.h | 5 +++-- arch/sparc/mm/tlb.c | 5 +++-- include/asm-generic/pgtable.h | 5 +++-- mm/huge_memory.c | 18 +++++++++--------- mm/pgtable-generic.c | 5 +++-- 7 files changed, 27 insertions(+), 21 deletions(-)
arch/s390/include/asm/pgtable.h +3 -2
@@ -1232,10 +1232,11 @@ static inline void __pmd_idte(unsigned long address, pmd_t *pmdp)#define SEGMENT_RW __pgprot(_HPAGE_TYPE_RW)#define __HAVE_ARCH_PGTABLE_DEPOSIT -extern void pgtable_trans_huge_deposit (struct mm_struct *mm,pgtable_t pgtable); +extern void pgtable_trans_huge_deposit (struct mm_struct *mm,pmd_t *pmdp, +pgtable_t pgtable);#define __HAVE_ARCH_PGTABLE_WITHDRAW -extern pgtable_t pgtable_trans_huge_withdraw (struct mm_struct *mm); +extern pgtable_t pgtable_trans_huge_withdraw (struct mm_struct *mm,pmd_t *pmdp);static inline int pmd_trans_splitting (pmd_t pmd) {
arch/s390/mm/pgtable.c +3 -2
@@ -920,7 +920,8 @@ void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address, } } -void pgtable_trans_huge_deposit (struct mm_struct *mm,pgtable_t pgtable) +void pgtable_trans_huge_deposit (struct mm_struct *mm,pmd_t *pmdp, +pgtable_t pgtable) {struct list_head *lh = (struct list_head *) pgtable;
@@ -934,7 +935,7 @@ void pgtable_trans_huge_deposit(struct mm_struct *mm, pgtable_t pgtable) mm->pmd_huge_pte = pgtable; } -pgtable_t pgtable_trans_huge_withdraw (struct mm_struct *mm) +pgtable_t pgtable_trans_huge_withdraw (struct mm_struct *mm,pmd_t *pmdp) {struct list_head *lh;pgtable_t pgtable;
arch/sparc/include/asm/pgtable_64.h +3 -2
@@ -853,10 +853,11 @@ extern void update_mmu_cache_pmd(struct vm_area_struct *vma, unsigned long addr, pmd_t *pmd);#define __HAVE_ARCH_PGTABLE_DEPOSIT -extern void pgtable_trans_huge_deposit (struct mm_struct *mm,pgtable_t pgtable); +extern void pgtable_trans_huge_deposit (struct mm_struct *mm,pmd_t *pmdp, +pgtable_t pgtable);#define __HAVE_ARCH_PGTABLE_WITHDRAW -extern pgtable_t pgtable_trans_huge_withdraw (struct mm_struct *mm); +extern pgtable_t pgtable_trans_huge_withdraw (struct mm_struct *mm,pmd_t *pmdp);#endif /* Encode and de-code a swap entry */
arch/sparc/mm/tlb.c +3 -2
@@ -150,7 +150,8 @@ void set_pmd_at(struct mm_struct *mm, unsigned long addr, } } -void pgtable_trans_huge_deposit (struct mm_struct *mm,pgtable_t pgtable) +void pgtable_trans_huge_deposit (struct mm_struct *mm,pmd_t *pmdp, +pgtable_t pgtable) {struct list_head *lh = (struct list_head *) pgtable;
@@ -164,7 +165,7 @@ void pgtable_trans_huge_deposit(struct mm_struct *mm, pgtable_t pgtable) mm->pmd_huge_pte = pgtable; } -pgtable_t pgtable_trans_huge_withdraw (struct mm_struct *mm) +pgtable_t pgtable_trans_huge_withdraw (struct mm_struct *mm,pmd_t *pmdp) {struct list_head *lh;pgtable_t pgtable;
include/asm-generic/pgtable.h +3 -2
@@ -163,11 +163,12 @@ extern void pmdp_splitting_flush(struct vm_area_struct *vma,#endif #ifndef __HAVE_ARCH_PGTABLE_DEPOSIT -extern void pgtable_trans_huge_deposit (struct mm_struct *mm,pgtable_t pgtable); +extern void pgtable_trans_huge_deposit (struct mm_struct *mm,pmd_t *pmdp, +pgtable_t pgtable);#endif #ifndef __HAVE_ARCH_PGTABLE_WITHDRAW -extern pgtable_t pgtable_trans_huge_withdraw (struct mm_struct *mm); +extern pgtable_t pgtable_trans_huge_withdraw (struct mm_struct *mm,pmd_t *pmdp);#endif #ifndef __HAVE_ARCH_PMDP_INVALIDATE
mm/huge_memory.c +9 -9
@@ -742,7 +742,7 @@ static int __do_huge_pmd_anonymous_page(struct mm_struct *mm,*/ page_add_new_anon_rmap (page, vma, haddr);set_pmd_at (mm, haddr, pmd, entry); -pgtable_trans_huge_deposit (mm, pgtable); +pgtable_trans_huge_deposit (mm, pmd, pgtable);add_mm_counter (mm,MM_ANONPAGES ,HPAGE_PMD_NR ); mm->nr_ptes++;spin_unlock (&mm->page_table_lock);
@@ -784,7 +784,7 @@ static bool set_huge_zero_page(pgtable_t pgtable, struct mm_struct *mm, entry =pmd_wrprotect (entry); entry =pmd_mkhuge (entry);set_pmd_at (mm, haddr, pmd, entry); -pgtable_trans_huge_deposit (mm, pgtable); +pgtable_trans_huge_deposit (mm, pmd, pgtable); mm->nr_ptes++;return true; }
@@ -929,7 +929,7 @@ int copy_huge_pmd(struct mm_struct *dst_mm, struct mm_struct *src_mm,pmdp_set_wrprotect (src_mm, addr, src_pmd); pmd =pmd_mkold (pmd_wrprotect (pmd));set_pmd_at (dst_mm, addr, dst_pmd, pmd); -pgtable_trans_huge_deposit (dst_mm, pgtable); +pgtable_trans_huge_deposit (dst_mm, dst_pmd, pgtable); dst_mm->nr_ptes++; ret =0 ;
@@ -999,7 +999,7 @@ static int do_huge_pmd_wp_zero_page_fallback(struct mm_struct *mm,pmdp_clear_flush (vma, haddr, pmd);/* leave pmd empty until pte is filled */ - pgtable =pgtable_trans_huge_withdraw (mm); + pgtable =pgtable_trans_huge_withdraw (mm, pmd);pmd_populate (mm, &_pmd, pgtable);for (i =0 ; i <HPAGE_PMD_NR ; i++, haddr +=PAGE_SIZE ) {
@@ -1094,10 +1094,10 @@ static int do_huge_pmd_wp_page_fallback(struct mm_struct *mm, goto out_free_pages;VM_BUG_ON (!PageHead (page)); + pgtable =pgtable_trans_huge_withdraw (mm, pmd);pmdp_clear_flush (vma, haddr, pmd);/* leave pmd empty until pte is filled */ - pgtable =pgtable_trans_huge_withdraw (mm);pmd_populate (mm, &_pmd, pgtable);for (i =0 ; i <HPAGE_PMD_NR ; i++, haddr +=PAGE_SIZE ) {
@@ -1380,7 +1380,7 @@ int zap_huge_pmd(struct mmu_gather *tlb, struct vm_area_struct *vma,struct page *page;pgtable_t pgtable;pmd_t orig_pmd; - pgtable =pgtable_trans_huge_withdraw (tlb->mm); + pgtable =pgtable_trans_huge_withdraw (tlb->mm, pmd); orig_pmd =pmdp_get_and_clear (tlb->mm, addr, pmd);tlb_remove_pmd_tlb_entry (tlb, pmd, addr);if (is_huge_zero_pmd (orig_pmd)) {
@@ -1712,7 +1712,7 @@ static int __split_huge_page_map(struct page *page, pmd =page_check_address_pmd (page, mm, address,PAGE_CHECK_ADDRESS_PMD_SPLITTING_FLAG );if (pmd) { - pgtable =pgtable_trans_huge_withdraw (mm); + pgtable =pgtable_trans_huge_withdraw (mm, pmd);pmd_populate (mm, &_pmd, pgtable); haddr = address;
@@ -2400,7 +2400,7 @@ static void collapse_huge_page(struct mm_struct *mm,page_add_new_anon_rmap (new_page, vma, address);set_pmd_at (mm, address, pmd, _pmd);update_mmu_cache_pmd (vma, address, pmd); -pgtable_trans_huge_deposit (mm, pgtable); +pgtable_trans_huge_deposit (mm, pmd, pgtable);spin_unlock (&mm->page_table_lock); *hpage =NULL ;
@@ -2706,7 +2706,7 @@ static void __split_huge_zero_page_pmd(struct vm_area_struct *vma,pmdp_clear_flush (vma, haddr, pmd);/* leave pmd empty until pte is filled */ - pgtable =pgtable_trans_huge_withdraw (mm); + pgtable =pgtable_trans_huge_withdraw (mm, pmd);pmd_populate (mm, &_pmd, pgtable);for (i =0 ; i <HPAGE_PMD_NR ; i++, haddr +=PAGE_SIZE ) {
mm/pgtable-generic.c +3 -2
@@ -124,7 +124,8 @@ void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address, #ifndef __HAVE_ARCH_PGTABLE_DEPOSIT #ifdef CONFIG_TRANSPARENT_HUGEPAGE -void pgtable_trans_huge_deposit(struct mm_struct *mm, pgtable_t pgtable) +void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp, + pgtable_t pgtable) { assert_spin_locked(&mm->page_table_lock);
@@ -141,7 +142,7 @@ void pgtable_trans_huge_deposit(struct mm_struct *mm, pgtable_t pgtable) #ifndef __HAVE_ARCH_PGTABLE_WITHDRAW #ifdef CONFIG_TRANSPARENT_HUGEPAGE /* no "address" argument so destroys page coloring of some arch */ -pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm) +pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp) { pgtable_t pgtable;
Signature · 1 line
1.7.10
RFC PATCH 15/21 mm/THP: support for zerout withdraw.
In reply to Aneesh Kumar K.VFrom: "Aneesh Kumar K.V" <[email protected]>
--- arch/s390/include/asm/pgtable.h | 6 ++++++ arch/sparc/include/asm/pgtable_64.h | 6 ++++++ include/asm-generic/pgtable.h | 9 +++++++++ mm/huge_memory.c | 7 ++++++- 4 files changed, 27 insertions(+), 1 deletion(-)
arch/s390/include/asm/pgtable.h +6 -0
@@ -1238,6 +1238,12 @@ extern void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp,#define __HAVE_ARCH_PGTABLE_WITHDRAWextern pgtable_t pgtable_trans_huge_withdraw (struct mm_struct *mm,pmd_t *pmdp); +static inline pgtable_t __pgtable_trans_huge_withdraw (struct mm_struct *mm, +pmd_t *pmdp,int tozero) +{ +return pgtable_trans_huge_withdraw (mm, pmdp); +} +static inline int pmd_trans_splitting (pmd_t pmd) {return pmd_val (pmd) & _SEGMENT_ENTRY_SPLIT;
arch/sparc/include/asm/pgtable_64.h +6 -0
@@ -858,6 +858,12 @@ extern void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp,#define __HAVE_ARCH_PGTABLE_WITHDRAWextern pgtable_t pgtable_trans_huge_withdraw (struct mm_struct *mm,pmd_t *pmdp); + +static inline pgtable_t __pgtable_trans_huge_withdraw (struct mm_struct *mm, +pmd_t *pmdp,int tozero) +{ +return pgtable_trans_huge_withdraw (mm, pmdp); +}#endif /* Encode and de-code a swap entry */
include/asm-generic/pgtable.h +9 -0
@@ -169,6 +169,15 @@ extern void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp,#ifndef __HAVE_ARCH_PGTABLE_WITHDRAWextern pgtable_t pgtable_trans_huge_withdraw (struct mm_struct *mm,pmd_t *pmdp); +/* +* Some archs use the deposited huge table internally. Request for a +* zeroed/non-zeroed pgtabled when withdrawing +*/ +static inline pgtable_t __pgtable_trans_huge_withdraw (struct mm_struct *mm, +pmd_t *pmdp,int tozero) +{ +return pgtable_trans_huge_withdraw (mm, pmdp); +}#endif #ifndef __HAVE_ARCH_PMDP_INVALIDATE
mm/huge_memory.c +6 -1
@@ -1380,7 +1380,12 @@ int zap_huge_pmd(struct mmu_gather *tlb, struct vm_area_struct *vma,struct page *page;pgtable_t pgtable;pmd_t orig_pmd; - pgtable =pgtable_trans_huge_withdraw (tlb->mm, pmd); +/* +* Withdraw the pgtable without zero out, because +* the following pmd_get_and_clear will look at +* pgtable contents, in case of architectures like ppc64 +*/ + pgtable =__pgtable_trans_huge_withdraw (tlb->mm, pmd,0 ); orig_pmd =pmdp_get_and_clear (tlb->mm, addr, pmd);tlb_remove_pmd_tlb_entry (tlb, pmd, addr);if (is_huge_zero_pmd (orig_pmd)) {
Signature · 1 line
1.7.10
RFC PATCH 16/21 powerpc/THP: Implement transparent huge pages for ppc64
In reply to Aneesh Kumar K.VFrom: "Aneesh Kumar K.V" <[email protected]>
We now have pmd entries covering to 16MB range. To implement THP on powerpc, we double the size of PMD. The second half is used to deposit the pgtable (PTE page). We also use the depoisted PTE page for tracking the HPTE information. The information include [ secondary group | 3 bit hidx | valid ]. We use one byte per each HPTE entry. With 16MB huge page and 64K HPTE we need 256 entries and with 4K HPTE we need 4096 entries. Both will fit in a 4K PTE page.
--- arch/powerpc/include/asm/page.h | 2 +- arch/powerpc/include/asm/pgtable-ppc64-64k.h | 3 +- arch/powerpc/include/asm/pgtable-ppc64.h | 6 +- arch/powerpc/include/asm/pgtable.h | 255 ++++++++++++++++++++ arch/powerpc/mm/init_64.c | 14 ++ arch/powerpc/mm/pgtable.c | 321 ++++++++++++++++++++++++++ arch/powerpc/mm/pgtable_64.c | 13 ++ arch/powerpc/platforms/Kconfig.cputype | 1 + 8 files changed, 612 insertions(+), 3 deletions(-)
arch/powerpc/include/asm/page.h +1 -1
@@ -40,7 +40,7 @@#ifdef CONFIG_HUGETLB_PAGE extern unsigned int HPAGE_SHIFT ;#else -#define HPAGE_SHIFT PAGE_SHIFT +#define HPAGE_SHIFT PMD_SHIFT#endif #define HPAGE_SIZE ((1UL) << HPAGE_SHIFT)#define HPAGE_MASK (~(HPAGE_SIZE - 1))
arch/powerpc/include/asm/pgtable-ppc64-64k.h +2 -1
@@ -33,7 +33,8 @@#define PGDIR_MASK (~(PGDIR_SIZE-1))/* Bits to mask out from a PMD to get to the PTE page */ -#define PMD_MASKED_BITS 0x1ff +/* PMDs point to PTE table fragments which are 4K aligned. */ +#define PMD_MASKED_BITS 0xfff/* Bits to mask out from a PGD/PUD to get to the PMD page */ #define PUD_MASKED_BITS 0x1ff
arch/powerpc/include/asm/pgtable-ppc64.h +5 -1
@@ -149,8 +149,12 @@ || (pmd_val(pmd) & PMD_BAD_BITS))#define pmd_present (pmd) (pmd_val(pmd) != 0)#define pmd_clear (pmdp) (pmd_val(*(pmdp)) = 0) +/* +* FIXME PMD_MASKED_BITS should include all of PMD_HUGE_PROTBITS +* should only be called for non huge pages. +*/ #define pmd_page_vaddr (pmd) (pmd_val(pmd) & ~PMD_MASKED_BITS) -#define pmd_page (pmd) virt_to_page(pmd_page_vaddr(pmd)) +extern struct page *pmd_page (pmd_t pmd);#define pud_set (pudp, pudval) (pud_val(*(pudp)) = (pudval))#define pud_none (pud) (!pud_val(pud))
arch/powerpc/include/asm/pgtable.h +255 -0
261 lines not on this page · raw message
arch/powerpc/mm/init_64.c +14 -0
@@ -88,7 +88,12 @@ static void pgd_ctor(void *addr)static void pmd_ctor (void *addr) { +/* FIXME may be we can take size as arg ? */ +#ifdef CONFIG_TRANSPARENT_HUGEPAGE +memset (addr,0 ,PMD_TABLE_SIZE *2 ); +#else memset (addr,0 ,PMD_TABLE_SIZE ); +#endif }struct kmem_cache *pgtable_cache[MAX_PGTABLE_INDEX_SIZE ];
@@ -138,7 +143,16 @@ void __pgtable_cache_add(unsigned int index, unsigned long table_size,void pgtable_cache_init (void ) {pgtable_cache_add (PGD_INDEX_SIZE , pgd_ctor); +#ifdef CONFIG_TRANSPARENT_HUGEPAGE +/* +* we store the pgtable details in the second half of PMD +*/ +if (PGT_CACHE (PMD_INDEX_SIZE )) +pr_err ("PMD Page cache already initialized with different size\n" ); +__pgtable_cache_add (PMD_INDEX_SIZE ,PMD_TABLE_SIZE *2 , pmd_ctor); +#else pgtable_cache_add (PMD_INDEX_SIZE , pmd_ctor); +#endif if (!PGT_CACHE (PGD_INDEX_SIZE ) || !PGT_CACHE (PMD_INDEX_SIZE ))panic ("Couldn't allocate pgtable caches" );
arch/powerpc/mm/pgtable.c +321 -0
330 lines not on this page · raw message
arch/powerpc/mm/pgtable_64.c +13 -0
@@ -339,6 +339,19 @@ EXPORT_SYMBOL(iounmap);EXPORT_SYMBOL (__iounmap);EXPORT_SYMBOL (__iounmap_at); +/* +* For huge page we have pfn in the pmd, we use PMD_HUGE_RPN_SHIFT bits for flags +* For PTE page, we have a PTE_FRAG_SIZE (4K) aligned virtual address. +*/ +struct page *pmd_page (pmd_t pmd) +{ +#ifdef CONFIG_TRANSPARENT_HUGEPAGE +if (pmd_val (pmd) &PMD_ISHUGE ) +return pfn_to_page (pmd_pfn (pmd)); +#endif +return virt_to_page (pmd_page_vaddr (pmd)); +} +#ifdef CONFIG_PPC_64K_PAGES /* * we support 15 fragments per PTE page. This is limited by how many
arch/powerpc/platforms/Kconfig.cputype +1 -0
@@ -71,6 +71,7 @@ config PPC_BOOK3S_64 select PPC_FPU select PPC_HAVE_PMU_SUPPORT select SYS_SUPPORTS_HUGETLBFS + select HAVE_ARCH_TRANSPARENT_HUGEPAGE if PPC_64K_PAGES config PPC_BOOK3E_64 bool "Embedded processors"
Signature · 7 lines
1.7.10 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
RFC PATCH 17/21 powerpc/THP: Differentiate THP PMD entries from HUGETLB PMD entries
In reply to Aneesh Kumar K.VFrom: "Aneesh Kumar K.V" <[email protected]>
HUGETLB clear the top bit of PMD entries and use that to indicate a HUGETLB page directory. Since we store pfns in PMDs for THP, we would have the top bit cleared by default. Add the top bit mask for THP PMD entries and clear that when we are looking for pmd_pfn.
--- arch/powerpc/include/asm/pgtable.h | 15 ++++++++++++--- arch/powerpc/mm/pgtable.c | 5 ++++- arch/powerpc/mm/pgtable_64.c | 2 +- 3 files changed, 17 insertions(+), 5 deletions(-)
arch/powerpc/include/asm/pgtable.h +12 -3
@@ -31,7 +31,7 @@ struct mm_struct;#define PMD_HUGE_EXEC 0x004/* No execute on POWER4 and newer (we invert) */ #define PMD_HUGE_SPLITTING 0x008#define PMD_HUGE_HASHPTE 0x010 -#define PMD_ISHUGE 0x020 +#define _PMD_ISHUGE 0x020#define PMD_HUGE_DIRTY 0x080/* C: page changed */ #define PMD_HUGE_ACCESSED 0x100/* R: page referenced */ #define PMD_HUGE_RW 0x200/* software: user write access allowed */
@@ -44,6 +44,14 @@ struct mm_struct;#define PMD_HUGE_RPN_SHIFT PTE_RPN_SHIFT#define HUGE_PAGE_SIZE (ASM_CONST(1) << 24)#define HUGE_PAGE_MASK (~(HUGE_PAGE_SIZE - 1)) +/* +* HugeTLB looks at the top bit of the Linux page table entries to +* decide whether it is a huge page directory or not. Mark HUGE +* PMD to differentiate +*/ +#define PMD_HUGE_NOT_HUGETLB (ASM_CONST(1) << 63) +#define PMD_ISHUGE (_PMD_ISHUGE | PMD_HUGE_NOT_HUGETLB) +#define PMD_HUGE_PROTBITS (0xfff | PMD_HUGE_NOT_HUGETLB)#ifndef __ASSEMBLY__ extern void hpte_need_hugepage_flush(struct mm_struct *mm, unsigned long addr,
@@ -61,7 +69,8 @@ static inline unsigned long pmd_pfn(pmd_t pmd)/* * Only called for huge page pmd */ -return pmd_val (pmd) >>PMD_HUGE_RPN_SHIFT ; +unsigned long val =pmd_val (pmd) & ~PMD_HUGE_PROTBITS ; +return val >>PMD_HUGE_RPN_SHIFT ; }static inline int pmd_young (pmd_t pmd)
@@ -95,7 +104,7 @@ static inline int pmd_trans_splitting(pmd_t pmd)static inline int pmd_trans_huge (pmd_t pmd) { -return pmd_val (pmd) &PMD_ISHUGE ; +return ((pmd_val (pmd) &PMD_ISHUGE ) ==PMD_ISHUGE ); }/* We will enable it in the last patch */
arch/powerpc/mm/pgtable.c +4 -1
@@ -528,7 +528,10 @@ static pmd_t pmd_set_protbits(pmd_t pmd, pgprot_t pgprot)pmd_t pfn_pmd (unsigned long pfn,pgprot_t pgprot) {pmd_t pmd; - +/* +* We cannot support that many PFNs +*/ +VM_BUG_ON (pfn &PMD_HUGE_NOT_HUGETLB );pmd_val (pmd) = pfn <<PMD_HUGE_RPN_SHIFT ;/* * pgtable_t is always 4K aligned, even in case where we use the
arch/powerpc/mm/pgtable_64.c +1 -1
@@ -346,7 +346,7 @@ EXPORT_SYMBOL(__iounmap_at);struct page *pmd_page (pmd_t pmd) {#ifdef CONFIG_TRANSPARENT_HUGEPAGE -if (pmd_val (pmd) &PMD_ISHUGE ) +if ((pmd_val (pmd) &PMD_ISHUGE ) ==PMD_ISHUGE )return pfn_to_page (pmd_pfn (pmd));#endif return virt_to_page (pmd_page_vaddr (pmd));
Signature · 7 lines
1.7.10 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
RFC PATCH 18/21 powerpc/THP: Add code to handle HPTE faults for large pages
In reply to Aneesh Kumar K.VFrom: "Aneesh Kumar K.V" <[email protected]>
We now have pmd entries covering to 16MB range. To implement THP on powerpc, we double the size of PMD. The second half is used to deposit the pgtable (PTE page). We also use the depoisted PTE page for tracking the HPTE information. The information include [ secondary group | 3 bit hidx | valid ]. We use one byte per each HPTE entry. With 16MB huge page and 64K HPTE we need 256 entries and with 4K HPTE we need 4096 entries. Both will fit in a 4K PTE page.
--- arch/powerpc/include/asm/mmu-hash64.h | 5 + arch/powerpc/include/asm/pgtable-ppc64.h | 33 ++---- arch/powerpc/kernel/io-workarounds.c | 2 +- arch/powerpc/kvm/book3s_64_mmu_hv.c | 2 +- arch/powerpc/kvm/book3s_hv_rm_mmu.c | 5 +- arch/powerpc/mm/Makefile | 1 + arch/powerpc/mm/hash_utils_64.c | 12 ++- arch/powerpc/mm/hugetlbpage.c | 25 ++++- arch/powerpc/mm/largepage-hash64.c | 170 ++++++++++++++++++++++++++++++ arch/powerpc/mm/pgtable.c | 38 +++++++ arch/powerpc/mm/tlb_hash64.c | 2 +- arch/powerpc/perf/callchain.c | 2 +- arch/powerpc/platforms/pseries/eeh.c | 2 +- 13 files changed, 257 insertions(+), 42 deletions(-) create mode 100644 arch/powerpc/mm/largepage-hash64.c
arch/powerpc/include/asm/mmu-hash64.h +5 -0
@@ -325,6 +325,11 @@ extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap)int __hash_page_huge (unsigned long ea,unsigned long access,unsigned long vsid,pte_t *ptep,unsigned long trap,int local,int ssize,unsigned int shift,unsigned int mmu_psize); +#ifdef CONFIG_TRANSPARENT_HUGEPAGE +extern int __hash_page_thp (unsigned long ea,unsigned long access, +unsigned long vsid,pmd_t *pmdp,unsigned long trap, +int local,int ssize,unsigned int psize); +#endif extern void hash_failure_debug(unsigned long ea, unsigned long access, unsigned long vsid, unsigned long trap, int ssize, int psize, int lpsize,
arch/powerpc/include/asm/pgtable-ppc64.h +6 -27
@@ -350,39 +350,18 @@ static inline void pgtable_cache_add(unsigned shift, void (*ctor)(void *))return __pgtable_cache_add (shift,sizeof (void *) << shift, ctor); } -/* -* find_linux_pte returns the address of a linux pte for a given -* effective address and directory. If not found, it returns zero. -*/ -static inline pte_t *find_linux_pte (pgd_t *pgdir,unsigned long ea) -{ -pgd_t *pg; -pud_t *pu; -pmd_t *pm; -pte_t *pt =NULL ; - - pg = pgdir +pgd_index (ea); -if (!pgd_none (*pg)) { - pu =pud_offset (pg, ea); -if (!pud_none (*pu)) { - pm =pmd_offset (pu, ea); -if (pmd_present (*pm)) - pt =pte_offset_kernel (pm, ea); - } - } -return pt; -} - -#ifdef CONFIG_HUGETLB_PAGE +pte_t *find_linux_pte (pgd_t *pgdir,unsigned long ea,unsigned int *thp); +#if defined(CONFIG_HUGETLB_PAGE )pte_t *find_linux_pte_or_hugepte (pgd_t *pgdir,unsigned long ea, -unsigned *shift); +unsigned *shift,unsigned int *thp);#else static inline pte_t *find_linux_pte_or_hugepte (pgd_t *pgdir,unsigned long ea, -unsigned *shift) +unsigned *shift, +unsigned int *thp) {if (shift) *shift =0 ; -return find_linux_pte (pgdir, ea); +return find_linux_pte (pgdir, ea, thp); }#endif /* !CONFIG_HUGETLB_PAGE */
arch/powerpc/kernel/io-workarounds.c +1 -1
@@ -70,7 +70,7 @@ struct iowa_bus *iowa_mem_find_bus(const PCI_IO_ADDR addr)if (vaddr <PHB_IO_BASE || vaddr >=PHB_IO_END )return NULL ; - ptep =find_linux_pte (init_mm.pgd, vaddr); + ptep =find_linux_pte (init_mm.pgd, vaddr,NULL );if (ptep ==NULL ) paddr =0 ;else
arch/powerpc/kvm/book3s_64_mmu_hv.c +1 -1
@@ -683,7 +683,7 @@ int kvmppc_book3s_hv_page_fault(struct kvm_run *run, struct kvm_vcpu *vcpu,*/ rcu_read_lock_sched (); ptep =find_linux_pte_or_hugepte (current->mm->pgd, - hva,NULL ); + hva,NULL ,NULL );if (ptep &&pte_present (*ptep)) { pte =kvmppc_read_update_linux_pte (ptep,1 );if (pte_write (pte))
arch/powerpc/kvm/book3s_hv_rm_mmu.c +3 -2
@@ -27,7 +27,7 @@ static void *real_vmalloc_addr(void *x)unsigned long addr = (unsigned long ) x;pte_t *p; - p =find_linux_pte (swapper_pg_dir, addr); + p =find_linux_pte (swapper_pg_dir, addr,NULL );if (!p || !pte_present (*p))return NULL ;/* assume we don't have huge pages in vmalloc space... */
@@ -145,6 +145,7 @@ static void remove_revmap_chain(struct kvm *kvm, long pte_index,unlock_rmap (rmap); } +/* FIXME!! check */ static pte_t lookup_linux_pte (pgd_t *pgdir,unsigned long hva,int writing,unsigned long *pte_sizep) {
@@ -152,7 +153,7 @@ static pte_t lookup_linux_pte(pgd_t *pgdir, unsigned long hva,unsigned long ps = *pte_sizep;unsigned int shift; - ptep =find_linux_pte_or_hugepte (pgdir, hva, &shift); + ptep =find_linux_pte_or_hugepte (pgdir, hva, &shift,NULL );if (!ptep)return __pte (0 );if (shift)
arch/powerpc/mm/Makefile +1 -0
@@ -33,6 +33,7 @@ obj-y += hugetlbpage.o obj-$(CONFIG_PPC_STD_MMU_64) += hugetlbpage-hash64.o obj-$(CONFIG_PPC_BOOK3E_MMU) += hugetlbpage-book3e.o endif +obj-$(CONFIG_TRANSPARENT_HUGEPAGE) += largepage-hash64.o obj-$(CONFIG_PPC_SUBPAGE_PROT) += subpage-prot.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o obj-$(CONFIG_HIGHMEM) += highmem.o
arch/powerpc/mm/hash_utils_64.c +9 -3
@@ -939,7 +939,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)unsigned long vsid;struct mm_struct *mm;pte_t *ptep; -unsigned hugeshift; +unsigned hugeshift, thp;const struct cpumask *tmp;int rc, user_region =0 , local =0 ;int psize, ssize;
@@ -1005,7 +1005,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)#endif /* CONFIG_PPC_64K_PAGES */ /* Get PTE and page size from page tables */ - ptep =find_linux_pte_or_hugepte (pgdir, ea, &hugeshift); + ptep =find_linux_pte_or_hugepte (pgdir, ea, &hugeshift, &thp);if (ptep ==NULL || !pte_present (*ptep)) {DBG_LOW (" no PTE !\n" );return 1 ;
@@ -1028,6 +1028,12 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) ssize, hugeshift, psize);#endif /* CONFIG_HUGETLB_PAGE */ +#ifdef CONFIG_TRANSPARENT_HUGEPAGE +if (thp) +return __hash_page_thp (ea, access, vsid, (pmd_t *)ptep, + trap, local, ssize, psize); +#endif +#ifndef CONFIG_PPC_64K_PAGES DBG_LOW (" i-pte: %016lx\n" ,pte_val (*ptep));#else
@@ -1133,7 +1139,7 @@ void hash_preload(struct mm_struct *mm, unsigned long ea, pgdir = mm->pgd;if (pgdir ==NULL )return ; - ptep =find_linux_pte (pgdir, ea); + ptep =find_linux_pte (pgdir, ea,NULL );if (!ptep)return ;
arch/powerpc/mm/hugetlbpage.c +20 -5
@@ -67,7 +67,8 @@ static inline unsigned int mmu_psize_to_shift(unsigned int mmu_psize)#define hugepd_none (hpd) ((hpd).pd == 0) -pte_t *find_linux_pte_or_hugepte (pgd_t *pgdir,unsigned long ea,unsigned *shift) +pte_t *find_linux_pte_or_hugepte (pgd_t *pgdir,unsigned long ea, +unsigned *shift,unsigned int *thp) {pgd_t *pg;pud_t *pu;
@@ -77,6 +78,8 @@ pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, unsigned *shiftif (shift) *shift =0 ; +if (thp) + *thp =0 ; pg = pgdir +pgd_index (ea);if (is_hugepd (pg)) {
@@ -91,12 +94,24 @@ pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, unsigned *shift pm =pmd_offset (pu, ea);if (is_hugepd (pm)) hpdp = (hugepd_t *)pm; -else if (!pmd_none (*pm)) { +else if (pmd_large (*pm)) { +/* THP page */ +if (thp) { + *thp =1 ; +/* +* This should be ok, except for few +* flags most of the pte, large page +* pmd bits map. We don't use the +* returned value as pte_t in the caller. +*/ +return (pte_t *)pm; + }else +return NULL ; + }else if (!pmd_none (*pm)) {return pte_offset_kernel (pm, ea); } } } -if (!hpdp)return NULL ;
@@ -108,7 +123,7 @@ EXPORT_SYMBOL_GPL(find_linux_pte_or_hugepte);pte_t *huge_pte_offset (struct mm_struct *mm,unsigned long addr) { -return find_linux_pte_or_hugepte (mm->pgd, addr,NULL ); +return find_linux_pte_or_hugepte (mm->pgd, addr,NULL ,NULL ); } static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
@@ -614,7 +629,7 @@ follow_huge_addr(struct mm_struct *mm, unsigned long address, int write)unsigned shift;unsigned long mask; - ptep =find_linux_pte_or_hugepte (mm->pgd, address, &shift); + ptep =find_linux_pte_or_hugepte (mm->pgd, address, &shift,NULL );/* Verify it is a huge page else bail. */ if (!ptep || !shift)
arch/powerpc/mm/largepage-hash64.c new file +170 -0
170 lines not on this page · raw message
arch/powerpc/mm/pgtable.c +38 -0
@@ -564,3 +564,41 @@ void update_mmu_cache_pmd(struct vm_area_struct *vma, unsigned long addr, }#endif /* CONFIG_TRANSPARENT_HUGEPAGE */ + +/* +* find_linux_pte returns the address of a linux pte for a given +* effective address and directory. If not found, it returns zero. +*/ +pte_t *find_linux_pte (pgd_t *pgdir,unsigned long ea,unsigned int *thp) +{ +pgd_t *pg; +pud_t *pu; +pmd_t *pm; +pte_t *pt =NULL ; + +if (thp) + *thp =0 ; + pg = pgdir +pgd_index (ea); +if (!pgd_none (*pg)) { + pu =pud_offset (pg, ea); +if (!pud_none (*pu)) { + pm =pmd_offset (pu, ea); +if (pmd_large (*pm)) { +/* THP page */ +if (thp) { + *thp =1 ; +/* +* This should be ok, except for few +* flags most of the pte, large page +* pmd bits map. We don't use the +* returned value as pte_t in the caller. +*/ +return (pte_t *)pm; + }else +return NULL ; + }else if (pmd_present (*pm)) + pt =pte_offset_kernel (pm, ea); + } + } +return pt; +}
arch/powerpc/mm/tlb_hash64.c +1 -1
@@ -206,7 +206,7 @@ void __flush_hash_table_range(struct mm_struct *mm, unsigned long start,local_irq_save (flags);arch_enter_lazy_mmu_mode ();for (; start < end; start +=PAGE_SIZE ) { -pte_t *ptep =find_linux_pte (mm->pgd, start); +pte_t *ptep =find_linux_pte (mm->pgd, start,NULL );unsigned long pte;if (ptep ==NULL )
arch/powerpc/perf/callchain.c +1 -1
@@ -125,7 +125,7 @@ static int read_user_stack_slow(void __user *ptr, void *ret, int nb)if (!pgdir)return -EFAULT ; - ptep =find_linux_pte_or_hugepte (pgdir, addr, &shift); + ptep =find_linux_pte_or_hugepte (pgdir, addr, &shift,NULL );if (!shift) shift =PAGE_SHIFT ;
arch/powerpc/platforms/pseries/eeh.c +1 -1
@@ -261,7 +261,7 @@ static inline unsigned long eeh_token_to_phys(unsigned long token)pte_t *ptep;unsigned long pa; - ptep =find_linux_pte (init_mm.pgd, token); + ptep =find_linux_pte (init_mm.pgd, token,NULL );if (!ptep)return token; pa =pte_pfn (*ptep) <<PAGE_SHIFT ;
Signature · 7 lines
1.7.10 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
RFC PATCH 19/21 powerpc/THP: hypervisor require few WIMG bit set
In reply to Aneesh Kumar K.VFrom: "Aneesh Kumar K.V" <[email protected]>
Without this insert will return H_PARAMETER error. Also use the signed variant when printing error.
--- arch/powerpc/mm/largepage-hash64.c | 2 ++ 1 file changed, 2 insertions(+)
arch/powerpc/mm/largepage-hash64.c +2 -0
@@ -123,6 +123,8 @@ repeat:/* Add in WIMG bits. FIXME!! enabled by default */ rflags |= (new_pmd & (_PAGE_WRITETHRU | _PAGE_NO_CACHE | _PAGE_COHERENT | _PAGE_GUARDED)); +#else + rflags |= _PAGE_COHERENT;#endif /* Insert into the hash table, primary slot */ slot = ppc_md.hpte_insert(hpte_group, vpn, pa, rflags, 0,
Signature · 7 lines
1.7.10 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
RFC PATCH 20/21 powerpc/THP: get_user_pages_fast changes
In reply to Aneesh Kumar K.VFrom: "Aneesh Kumar K.V" <[email protected]>
handle large pages for get_user_pages_fast. Also take care of large page splitting.
--- arch/powerpc/mm/gup.c | 84 +++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 82 insertions(+), 2 deletions(-)
arch/powerpc/mm/gup.c +82 -2
@@ -55,6 +55,72 @@ static noinline int gup_pte_range(pmd_t pmd, unsigned long addr,return 1 ; } +#ifdef CONFIG_TRANSPARENT_HUGEPAGE +static inline int gup_huge_pmd (pmd_t *pmdp,unsigned long addr, +unsigned long end,int write, +struct page **pages,int *nr) +{ +int refs; +pmd_t pmd; +unsigned long mask; +struct page *head, *page, *tail; + + pmd = *pmdp; + mask =PMD_HUGE_PRESENT |PMD_HUGE_USER ; +if (write) + mask |=PMD_HUGE_RW ; + +if ((pmd_val (pmd) & mask) != mask) +return 0 ; + +/* large pages are never "special" */ +VM_BUG_ON (!pfn_valid (pmd_pfn (pmd))); + + refs =0 ; + head =pmd_page (pmd); + page = head + ((addr & ~PMD_MASK ) >>PAGE_SHIFT ); + tail = page; +do { +VM_BUG_ON (compound_head (page) != head); + pages[*nr] = page; + (*nr)++; + page++; + refs++; + }while (addr +=PAGE_SIZE , addr != end); + +if (!page_cache_add_speculative (head, refs)) { + *nr -= refs; +return 0 ; + } + +if (unlikely (pmd_val (pmd) !=pmd_val (*pmdp))) { + *nr -= refs; +while (refs--) +put_page (head); +return 0 ; + } +/* +* Any tail page need their mapcount reference taken before we +* return. +*/ +while (refs--) { +if (PageTail (tail)) +get_huge_page_tail (tail); + tail++; + } + +return 1 ; +} +#else + +static inline int gup_huge_pmd (pmd_t *pmdp,unsigned long addr, +unsigned long end,int write, +struct page **pages,int *nr) +{ +return 1 ; +} +#endif +static int gup_pmd_range (pud_t pud,unsigned long addr,unsigned long end,int write,struct page **pages,int *nr) {
@@ -66,9 +132,23 @@ static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,pmd_t pmd = *pmdp; next =pmd_addr_end (addr, end); -if (pmd_none (pmd)) +/* +* The pmd_trans_splitting() check below explains why +* pmdp_splitting_flush has to flush the tlb, to stop +* this gup-fast code from running while we set the +* splitting bit in the pmd. Returning zero will take +* the slow path that will call wait_split_huge_page() +* if the pmd is still in splitting state. gup-fast +* can't because it has irq disabled and +* wait_split_huge_page() would never return as the +* tlb flush IPI wouldn't run. +*/ +if (pmd_none (pmd) ||pmd_trans_splitting (pmd))return 0 ; -if (is_hugepd (pmdp)) { +if (unlikely (pmd_large (pmd))) { +if (!gup_huge_pmd (pmdp, addr, next, write, pages, nr)) +return 0 ; + }else if (is_hugepd (pmdp)) {if (!gup_hugepd ((hugepd_t *)pmdp,PMD_SHIFT , addr, next, write, pages, nr))return 0 ;
Signature · 7 lines
1.7.10 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
RFC PATCH 21/21 powerpc/THP: Enable THP on PPC64
In reply to Aneesh Kumar K.VFrom: "Aneesh Kumar K.V" <[email protected]>
We enable only if the we support 16MB page size.
--- arch/powerpc/include/asm/pgtable.h | 33 +++++++++++++++++++++++++++++++-- 1 file changed, 31 insertions(+), 2 deletions(-)
arch/powerpc/include/asm/pgtable.h +31 -2
@@ -107,8 +107,37 @@ static inline int pmd_trans_huge(pmd_t pmd)return ((pmd_val (pmd) &PMD_ISHUGE ) ==PMD_ISHUGE ); } -/* We will enable it in the last patch */ -#define has_transparent_hugepage () 0 +static inline int has_transparent_hugepage (void ) +{ +if (!mmu_has_feature (MMU_FTR_16M_PAGE )) +return 0 ; +/* +* We support THP only if HPAGE_SHIFT is 16MB. +*/ +if (!HPAGE_SHIFT || (HPAGE_SHIFT != mmu_psize_defs[MMU_PAGE_16M ].shift)) +return 0 ; +/* +* We need to make sure that we support 16MB huge page in a segement +* with base page size 64K or 4K. We only enable THP with a PAGE_SIZE +* of 64K. +*/ +/* FIXME!! is the nonzero check always correct ? Can there be an machine +* where penc is 0 ? +*/ +/* +* If we have 64K HPTE, we will be using that by default +*/ +if (mmu_psize_defs[MMU_PAGE_64K ].shift && + !mmu_psize_defs[MMU_PAGE_64K ].penc[MMU_PAGE_16M ]) +return 0 ; +/* +* Ok we only have 4K HPTE +*/ +if (!mmu_psize_defs[MMU_PAGE_4K ].penc[MMU_PAGE_16M ]) +return 0 ; + +return 1 ; +}static inline pmd_t pmd_mkold (pmd_t pmd) {
Signature · 7 lines
1.7.10 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Hi Aneesh,
Quoted 10 lines · Aneesh Kumar K.V
Hi,
This patchset adds transparent huge page support for PPC64.
I am marking the series to linux-mm because the PPC64 implementation required few interface changes to core THP code. I still have considerable number of FIXME!! in the patchset mostly related to PPC64 mm susbsytem. Those would require closer review and once we are clear on those changes, I will drop those FIXME!! with necessary comments.
Quoted 4 lines
Some numbers:
The latency measurements code from Anton found at
http://ozlabs.org/~anton/junkcode/latency2001.c
Can this benchmark use for x86?
Quoted 39 lines
THP disabled 64K page size
------------------------
[root@llmp24l02 ~]# ./latency2001 8G
8589934592 731.73 cycles 205.77 ns
[root@llmp24l02 ~]# ./latency2001 8G
8589934592 743.39 cycles 209.05 ns
[root@llmp24l02 ~]#THP disabled large page via hugetlbfs
-------------------------------------
[root@llmp24l02 ~]# ./latency2001 -l 8G
8589934592 416.09 cycles 117.01 ns
[root@llmp24l02 ~]# ./latency2001 -l 8G
8589934592 415.74 cycles 116.91 nsTHP enabled 64K page size.
----------------
[root@llmp24l02 ~]# ./latency2001 8G
8589934592 405.07 cycles 113.91 ns
[root@llmp24l02 ~]# ./latency2001 8G
8589934592 411.82 cycles 115.81 ns
[root@llmp24l02 ~]#We are close to hugetlbfs in latency and we can achieve this with zero config/page reservation. Most of the allocations above are fault allocated. I haven't really measured the collapse alloc impact.
Another test that does 50000000 random access over 1GB area goes from 2.65 seconds to 1.07 seconds with this patchset.
Changes from RFC V1:
* HugeTLB fs now works
* Compile issues fixed
* rebased to v3.8
* Patch series reorded so that ppc64 cleanups and MM THP changes are moved early in the series. This should help in picking those patches early.
Quoted 8 lines
Thanks,
-aneesh--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>