Skip to contentSkip to conversation

mx23/mxs pending patches

PATCH Superseded Otavio Salvador 4 participants 17 messages Mar 2, 2013 – Mar 7, 2013 1 message not in the archive

lore
Share & tools
lore
#0 lore raw

v5 cover mx23/mxs pending patches

This patchset includes the pending patches we have in our tree. It fixes issues for mx23evk and mx23_olinuxino boards. This depends on Marek's patchset which has included most of the previous patches in this patchset.

Changes in v5:
- Adapt code to newer multiport support
- Adapt code to newer multiport support

Changes in v2:
- Add changes for allow use of the USB hub
- Remove extra newline

Otavio Salvador (3):
mx23evk: Enable USB support
mx23_olinuxino: Enable USB support
mx23_olinuxino: Add ethernet support

 board/olimex/mx23_olinuxino/mx23_olinuxino.c |  5 +++
 board/olimex/mx23_olinuxino/spl_boot.c       |  4 +++
 include/configs/mx23_olinuxino.h             | 50 ++++++++++++++++++++++++++--
 include/configs/mx23evk.h                    | 11 ++++++
 4 files changed, 67 insertions(+), 3 deletions(-)
Signature · 1 line
1.8.1
#1 lore raw

PATCH v5 1/3 mx23evk: Enable USB support

This enabled USB support for the mx23evk board.

---
Changes in v5:
- Adapt code to newer multiport support

Changes in v2: None

 include/configs/mx23evk.h | 11 +++++++++++
 1 file changed, 11 insertions(+)
include/configs/mx23evk.h +11 -0
index d206c95..e5a15a4 100644
@@ -58,6 +58,7 @@
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_GPIO
 #define CONFIG_CMD_MMC
+#define CONFIG_CMD_USB
 #define CONFIG_CMD_BOOTZ
 
 /* Memory configurations */
@@ -122,6 +123,16 @@
 #define CONFIG_MXS_MMC
 #endif
 
+/* USB */
+#ifdef	CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MXS
+#define CONFIG_EHCI_MXS_PORT0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_STORAGE
+#endif
+
 /* Boot Linux */
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
Signature · 1 line
1.8.1
#2 lore raw

PATCH v5 1/3 mx23evk: Enable USB support

Quoted 4 lines · Otavio Salvador

This enabled USB support for the mx23evk board.

---

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#3 lore raw

PATCH v5 2/3 mx23_olinuxino: Enable USB support

In reply to Otavio Salvador

This enabled USB support for the mx23_olinuxino board.

---
Changes in v5:
- Adapt code to newer multiport support

Changes in v2:
- Add changes for allow use of the USB hub

 board/olimex/mx23_olinuxino/mx23_olinuxino.c |  5 +++++
 board/olimex/mx23_olinuxino/spl_boot.c       |  4 ++++
 include/configs/mx23_olinuxino.h             | 11 +++++++++++
 3 files changed, 20 insertions(+)
board/olimex/mx23_olinuxino/mx23_olinuxino.c +5 -0
index 2501417..9252717 100644
@@ -45,6 +45,11 @@ int board_early_init_f(void)
 	/* SSP0 clock at 96MHz */
 	mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
 
+#ifdef CONFIG_CMD_USB
+	/* Enable LAN9512 */
+	gpio_direction_output(MX23_PAD_GPMI_ALE__GPIO_0_17, 1);
+#endif
+
 	return 0;
 }
 
board/olimex/mx23_olinuxino/spl_boot.c +4 -0
index 3bbf5ad..a96c293 100644
@@ -95,6 +95,10 @@ const iomux_cfg_t iomux_setup[] = {
 	MX23_PAD_SSP1_DATA2__SSP1_DATA2 | MUX_CONFIG_SSP,
 	MX23_PAD_SSP1_DATA3__SSP1_DATA3 | MUX_CONFIG_SSP,
 	MX23_PAD_SSP1_SCK__SSP1_SCK | MUX_CONFIG_SSP,
+
+	/* Ethernet */
+	MX23_PAD_GPMI_ALE__GPIO_0_17 |
+		(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
 };
 
 void board_init_ll(void)
include/configs/mx23_olinuxino.h +11 -0
index d019944..90dda01 100644
@@ -60,6 +60,7 @@
 #define	CONFIG_CMD_GPIO
 #define	CONFIG_CMD_LED
 #define	CONFIG_CMD_MMC
+#define	CONFIG_CMD_USB
 
 /*
  * Memory configurations
@@ -140,6 +141,16 @@
  */
 #define CONFIG_APBH_DMA
 
+/* USB */
+#ifdef	CONFIG_CMD_USB
+#define	CONFIG_USB_EHCI
+#define	CONFIG_USB_EHCI_MXS
+#define	CONFIG_EHCI_MXS_PORT0
+#define	CONFIG_USB_MAX_CONTROLLER_COUNT 1
+#define	CONFIG_EHCI_IS_TDI
+#define	CONFIG_USB_STORAGE
+#endif
+
 /*
  * Boot Linux
  */
Signature · 1 line
1.8.1
#4 lore raw

PATCH v5 2/3 mx23_olinuxino: Enable USB support

Quoted 4 lines · Otavio Salvador

This enabled USB support for the mx23_olinuxino board.

---

Applied to u-boot-imx, but...

board/olimex/mx23_olinuxino/mx23_olinuxino.c int board_early_init_f(void) · line 51

Quoted 7 lines
board/olimex/mx23_olinuxino/mx23_olinuxino.c +4 -0
 	/* SSP0 clock at 96MHz */
 	mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
 
+#ifdef CONFIG_CMD_USB
+	/* Enable LAN9512 */
+	gpio_direction_output(MX23_PAD_GPMI_ALE__GPIO_0_17, 1);
+#endif

...the header for gpio is missing. Please send the patch to fix the warning.

mx23_olinuxino.c: In function 'board_early_init_f':
mx23_olinuxino.c:50:2: warning: implicit declaration of function 'gpio_direction_output' [-Wimplicit-function-declaration]

Thanks,
Stefano

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#5 lore raw

PATCH v5 3/3 mx23_olinuxino: Add ethernet support

In reply to Otavio Salvador

This adds support to the LAN9512 chip included in the board and extend the environment to easy netboot use.

---
Changes in v5: None
Changes in v2:
- Remove extra newline

 include/configs/mx23_olinuxino.h | 39 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 36 insertions(+), 3 deletions(-)
include/configs/mx23_olinuxino.h +36 -3
index 90dda01..03893d7 100644
@@ -55,11 +55,13 @@
 #define	CONFIG_DOS_PARTITION
 
 #define	CONFIG_CMD_CACHE
+#define	CONFIG_CMD_DHCP
 #define	CONFIG_CMD_EXT2
 #define	CONFIG_CMD_FAT
 #define	CONFIG_CMD_GPIO
 #define	CONFIG_CMD_LED
 #define	CONFIG_CMD_MMC
+#define	CONFIG_CMD_NET
 #define	CONFIG_CMD_USB
 
 /*
@@ -151,6 +153,12 @@
 #define	CONFIG_USB_STORAGE
 #endif
 
+/* Ethernet */
+#ifdef	CONFIG_CMD_NET
+#define	CONFIG_USB_HOST_ETHER
+#define	CONFIG_USB_ETHER_SMSC95XX
+#endif
+
 /*
  * Boot Linux
  */
@@ -192,6 +200,7 @@
 	"fdt_file=imx23-olinuxino.dtb\0" \
 	"fdt_addr=0x41000000\0" \
 	"boot_fdt=try\0" \
+	"ip_dyn=yes\0" \
 	"mmcdev=0\0" \
 	"mmcpart=2\0" \
 	"mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
@@ -217,6 +226,31 @@
 			"fi; " \
 		"else " \
 			"bootm; " \
+		"fi;\0" \
+	"netargs=setenv bootargs console=${console_mainline},${baudrate} " \
+		"root=/dev/nfs " \
+		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+	"netboot=echo Booting from net ...; " \
+		"usb start; " \
+		"run netargs; "	\
+		"if test ${ip_dyn} = yes; then " \
+			"setenv get_cmd dhcp; " \
+		"else " \
+			"setenv get_cmd tftp; " \
+		"fi; " \
+		"${get_cmd} ${uimage}; " \
+		"if test ${boot_fdt} = yes; then " \
+			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+				"bootm ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"if test ${boot_fdt} = try; then " \
+					"bootm; " \
+				"else " \
+					"echo WARN: Cannot load the DT; " \
+				"fi;" \
+			"fi; " \
+		"else " \
+			"bootm; " \
 		"fi;\0"
 
 #define CONFIG_BOOTCOMMAND \
@@ -226,10 +260,9 @@
 		"else " \
 			"if run loaduimage; then " \
 				"run mmcboot; " \
-			"else " \
-				"echo ERR: Fail to boot from MMC; " \
+			"else run netboot; " \
 			"fi; " \
 		"fi; " \
-	"else exit; fi"
+	"else run netboot; fi"
 
 #endif /* __MX23_OLINUXINO_CONFIG_H__ */
Signature · 1 line
1.8.1
#6 lore raw

PATCH v5 3/3 mx23_olinuxino: Add ethernet support

Quoted 5 lines · Otavio Salvador

This adds support to the LAN9512 chip included in the board and extend the environment to easy netboot use.

---

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#7 lore raw

v5 cover mx23/mxs pending patches

In reply to Otavio Salvador
Quoted 3 lines · Otavio Salvador

This patchset includes the pending patches we have in our tree. It fixes issues for mx23evk and mx23_olinuxino boards. This depends on

What issues does this patch series fix? I see that it adds USB support, but I don't see any bug fix.

A message that is not in the archive (sent off-list or not yet received): CAP9ODKqBEXtLxKnQdah0h0hqqR2YrdYXn4CK5+w+hA23zdFK=A@mail.gmail.com

#9 lore raw

v5 cover mx23/mxs pending patches

Quoted 5 lines · Otavio Salvador
Quoted 2 lines

What issues does this patch series fix? I see that it adds USB support, but I don't see any bug fix.

This is the missing patches, which has not been included in Marek series. He has included most patches in his pull request but this one's.

[Adding the list]

Ok, I see, but looks like you forgot to update the cover letter, as there are no bug fixes in this series as stated here.

#10 lore raw

v5 cover mx23/mxs pending patches

Quoted 5 lines · Fabio Estevam
Quoted 3 lines · Otavio Salvador
Quoted 2 lines

What issues does this patch series fix? I see that it adds USB support, but I don't see any bug fix.

Quoted 7 lines
Quoted 2 lines

This is the missing patches, which has not been included in Marek series. He has included most patches in his pull request but this one's.

[Adding the list]

Ok, I see, but looks like you forgot to update the cover letter, as there are no bug fixes in this series as stated here.

Right; I forgot indeed.

Signature · 3 lines
Otavio Salvador                             O.S. Systems
E-mail: otavio at ossystems.com.br  http://www.ossystems.com.br
Mobile: +55 53 9981-7854              http://projetos.ossystems.com.br
#11 lore raw

v5 cover mx23/mxs pending patches

In reply to Otavio Salvador

Dear Otavio Salvador,

Quoted 9 lines

This patchset includes the pending patches we have in our tree. It fixes issues for mx23evk and mx23_olinuxino boards. This depends on Marek's patchset which has included most of the previous patches in this patchset.

Changes in v5:
- Adapt code to newer multiport support
- Adapt code to newer multiport support

Quoted 8 lines

Changes in v2:
- Add changes for allow use of the USB hub
- Remove extra newline

Otavio Salvador (3):
mx23evk: Enable USB support
mx23_olinuxino: Enable USB support
mx23_olinuxino: Add ethernet support

I fail to understand what happened with that flurry of patches that was in V4. But maybe this is V5 for other series? I'm confused.

Best regards,
Marek Vasut

#12 lore raw

v5 cover mx23/mxs pending patches

Quoted 15 lines · Marek Vasut

Dear Otavio Salvador,

Quoted 13 lines

This patchset includes the pending patches we have in our tree. It fixes issues for mx23evk and mx23_olinuxino boards. This depends on Marek's patchset which has included most of the previous patches in this patchset.

Changes in v5:
- Adapt code to newer multiport support
- Adapt code to newer multiport support

Changes in v2:
- Add changes for allow use of the USB hub
- Remove extra newline

Quoted 7 lines
Quoted 4 lines

Otavio Salvador (3):
mx23evk: Enable USB support
mx23_olinuxino: Enable USB support
mx23_olinuxino: Add ethernet support

I fail to understand what happened with that flurry of patches that was in V4. But maybe this is V5 for other series? I'm confused.

The other patches of this serie you picked in your last pull request so I did not resend them to avoid making it more confusing for Stefano.

So these are the 3 other ones.

Signature · 3 lines
Otavio Salvador                             O.S. Systems
E-mail: otavio at ossystems.com.br  http://www.ossystems.com.br
Mobile: +55 53 9981-7854              http://projetos.ossystems.com.br
#13 lore raw

v5 cover mx23/mxs pending patches

Quoted 21 lines · Otavio Salvador
Quoted 20 lines · Marek Vasut

Dear Otavio Salvador,

Quoted 17 lines

This patchset includes the pending patches we have in our tree. It fixes issues for mx23evk and mx23_olinuxino boards. This depends on Marek's patchset which has included most of the previous patches in this patchset.

Changes in v5:
- Adapt code to newer multiport support
- Adapt code to newer multiport support

Changes in v2:
- Add changes for allow use of the USB hub
- Remove extra newline

Otavio Salvador (3):
mx23evk: Enable USB support
mx23_olinuxino: Enable USB support
mx23_olinuxino: Add ethernet support

Quoted 6 lines
Quoted 2 lines

I fail to understand what happened with that flurry of patches that was in V4. But maybe this is V5 for other series? I'm confused.

The other patches of this serie you picked in your last pull request so I did not resend them to avoid making it more confusing for Stefano.

Oh, I am stil lquite confused ;-)

I admit I cannot follow the ML in the lastr two weeks due to a urgent project, and I get a flood in my mailbox. Anyway, I have no problems with this series, and no comments are open. I apply it now.

Regards,
Stefano

Quoted 3 lines

So these are the 3 other ones.

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#14 lore raw

v5 cover mx23/mxs pending patches

Dear Stefano Babic,

Quoted 25 lines · Otavio Salvador
Quoted 24 lines · Marek Vasut
Quoted 22 lines

Dear Otavio Salvador,

Quoted 9 lines

This patchset includes the pending patches we have in our tree. It fixes issues for mx23evk and mx23_olinuxino boards. This depends on Marek's patchset which has included most of the previous patches in this patchset.

Changes in v5:
- Adapt code to newer multiport support
- Adapt code to newer multiport support

Quoted 8 lines

Changes in v2:
- Add changes for allow use of the USB hub
- Remove extra newline

Otavio Salvador (3):
mx23evk: Enable USB support
mx23_olinuxino: Enable USB support
mx23_olinuxino: Add ethernet support

I fail to understand what happened with that flurry of patches that was in V4. But maybe this is V5 for other series? I'm confused.

Quoted 8 lines
Quoted 3 lines

The other patches of this serie you picked in your last pull request so I did not resend them to avoid making it more confusing for Stefano.

Oh, I am stil lquite confused ;-)

I admit I cannot follow the ML in the lastr two weeks due to a urgent project, and I get a flood in my mailbox.

No kidding, same here.

Quoted 2 lines

Anyway, I have no problems
with this series, and no comments are open. I apply it now.

Check u-boot-testing :: mx233 if it helps, I picked all patches that shall be applied in there.

Quoted 4 lines

Regards,
Stefano

Quoted 1 line

So these are the 3 other ones.

Best regards,
Marek Vasut

#15 lore raw

v5 cover mx23/mxs pending patches

Quoted 36 lines · Marek Vasut

Dear Stefano Babic,

Quoted 25 lines · Otavio Salvador
Quoted 24 lines · Marek Vasut
Quoted 22 lines

Dear Otavio Salvador,

Quoted 9 lines

This patchset includes the pending patches we have in our tree. It fixes issues for mx23evk and mx23_olinuxino boards. This depends on Marek's patchset which has included most of the previous patches in this patchset.

Changes in v5:
- Adapt code to newer multiport support
- Adapt code to newer multiport support

Quoted 8 lines

Changes in v2:
- Add changes for allow use of the USB hub
- Remove extra newline

Otavio Salvador (3):
mx23evk: Enable USB support
mx23_olinuxino: Enable USB support
mx23_olinuxino: Add ethernet support

I fail to understand what happened with that flurry of patches that was in V4. But maybe this is V5 for other series? I'm confused.

Quoted 8 lines
Quoted 3 lines

The other patches of this serie you picked in your last pull request so I did not resend them to avoid making it more confusing for Stefano.

Oh, I am stil lquite confused ;-)

I admit I cannot follow the ML in the lastr two weeks due to a urgent project, and I get a flood in my mailbox.

Quoted 7 lines

No kidding, same here.

Quoted 2 lines

Anyway, I have no problems
with this series, and no comments are open. I apply it now.

Check u-boot-testing :: mx233 if it helps, I picked all patches that shall be applied in there.

There're patches which where not send for review there (as Makefile change)

Signature · 3 lines
Otavio Salvador                             O.S. Systems
E-mail: otavio at ossystems.com.br  http://www.ossystems.com.br
Mobile: +55 53 9981-7854              http://projetos.ossystems.com.br
#16 lore raw

v5 cover mx23/mxs pending patches

Quoted 4 lines · Otavio Salvador
Quoted 2 lines

Check u-boot-testing :: mx233 if it helps, I picked all patches that shall be applied in there.

There're patches which where not send for review there (as Makefile change)

Of course, such patches (I have find only what you mention) cannot be picked up at all if not reviewed here.

Regards,
Stefano

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#17 lore raw

v5 cover mx23/mxs pending patches

Dear Stefano Babic,

Quoted 9 lines · Otavio Salvador
Quoted 5 lines
Quoted 2 lines

Check u-boot-testing :: mx233 if it helps, I picked all patches that shall be applied in there.

There're patches which where not send for review there (as Makefile change)

Of course, such patches (I have find only what you mention) cannot be picked up at all if not reviewed here.

Sorry about that, that one convenience patch slipped in. I see you managed to pick the rest of those, thanks!

Best regards,
Marek Vasut