arm: mvebu: Fix pinctrl for Armada 370 Mirabox SDIO port.
PATCH 1/1 arm: mvebu: Fix pinctrl for Armada 370 Mirabox SDIO port.
The previous configuration used the wrong "clk" pin. Without this change mv_sdio worked because the bootloader would set the pin up, but with a bootloader that does not set the pin, mv_sdio fails to detect any card.
I have tested this change using a mwifiex_sdio wireless network adapter over the SDIO interface.
--- arch/arm/boot/dts/armada-370-mirabox.dts | 2 +- arch/arm/boot/dts/armada-370.dtsi | 6 ++++++ 2 files changed, 7 insertions(+), 1 deletion(-)
arch/arm/boot/dts/armada-370-mirabox.dts +1 -1
@@ -54,7 +54,7 @@ }; mvsdio at d00d4000 { - pinctrl-0 = <&sdio_pins2>; + pinctrl-0 = <&sdio_pins3>; pinctrl-names = "default"; status = "okay"; /*
arch/arm/boot/dts/armada-370.dtsi +6 -0
@@ -59,6 +59,12 @@ "mpp50", "mpp51", "mpp52"; marvell,function = "sd0"; }; + + sdio_pins3: sdio-pins3 { + marvell,pins = "mpp48", "mpp49", "mpp50", + "mpp51", "mpp52", "mpp53"; + marvell,function = "sd0"; + }; }; gpio0: gpio at d0018100 {
Signature · 1 line
1.8.1.2
Jason Cooper
AppliedPATCH 1/1 arm: mvebu: Fix pinctrl for Armada 370 Mirabox SDIO port.
Quoted 5 lines · Ryan Press
The previous configuration used the wrong "clk" pin. Without this change
mv_sdioworked because the bootloader would set the pin up, but with a bootloader that does not set the pin,mv_sdiofails to detect any card.
Quoted 8 lines
I have tested this change using a
mwifiex_sdiowireless network adapter over the SDIO interface.Signed-off-by Ryan Press <[email protected]>--- arch/arm/boot/dts/armada-370-mirabox.dts | 2 +- arch/arm/boot/dts/armada-370.dtsi | 6 ++++++ 2 files changed, 7 insertions(+), 1 deletion(-)
Applied to mvebu/fixes
I changed the commit message to wrap at the appropriate width.
thx,
Jason.