Skip to contentSkip to conversation

RFC: Add Kbuild system to U-Boot

RFC PATCH New Simon Glass 3 participants 17 messages May 13, 2013 – May 31, 2013

Subsystems (15)
Arm (32-bit) x86 VFS USB +11 more subsystems
lore
Share & tools
lore
#0 lore raw

cover RFC: Add Kbuild system to U-Boot

Kbuild in U-Boot has been talked about for a while and I know of at least one functioning attempt and mentions of independent progress. But I don't see any patches on the mailing list and various people have suggested that nothing is far advanced yet, so I decided to take a look.

For this effort, the goals are:

- Use Kbuild to build U-Boot, even if the existing CONFIG structure remains
- Provide access to Kconfig infrastructure so we can migrate to it
- Change as little U-Boot code as possible, particularly Makefiles

While some people regard U-Boot's config file approach as primitive, it is very flexible. In practice many Linux build systems use a 'defconfig' which is much the same thing, just without the comments. However, Kbuild/Kconfig does provide some advantages:

- 'make menuconfig' and friends, an easy way to browse/change configuration
- More obvious information about configuration dependencies
- Configuration help within the Kconfig files, rather than a separate README
- The build prints the full path of each file built. Apart from the resulting clarity, this works nicely with IDEs/emacs which can open the correct file/line for each warning/error
- Welcoming and familiar to those coming from Linux
- Some other things

With respect to a migration path to full use of Kconfig for U-Boot, if that is desired, I suggest it can be done incrementally. The scheme in this series allows existing Makefiles to be used with only minor modification (to fix those which don't follow convention and add information about subdirectories). I think it is feasible to keep the config files and Kconfig running together for a time.

This series is a pretty early and raw attempt to get Kbuild running in U-Boot. I am not entirely comfortable with posting it, but decided that what was missing from previous efforts was posted patches, so here they are. A close review is not needed right now, but thoughts on the approach would be very valuable.

This series is missing all sorts of things, some of them critical (SPL, actual binary output, correct filename for 'u-boot' output, out-of-tree building). It will also pollute your tree with various files that you will need to manually remove afterwards.

But it does produce some sort of output for three boards (sandbox, seaboard, smdk5250).

To get a verbose build, try 'make V=1'. By default only the filenames and warnings/errors are printed.

To try it:

make sandbox_config
make
size vmlinux
./vmlinux

You can use the existing build system with:

make -f Makefile.legacy sandbox_config
make -f Makefile.legacy
size u-boot
./u-boot

If you omit the final patch, you can keep the existing build system in place and have the Kconfig one separate, in Makefile.kbuild, for use with 'make -f Makefile.kbuild'.

There is only one build option, and that isn't really an option, but to see it:

make menuconfig

or (perhaps preceeded by 'sudo apt-get install libqt4-dev g++'):

make xconfig

Simon Glass (7):
Add some required Kconfig files
arm: Allow start.o to come from any directory
Tidy up Makefiles to use COBJS consistently
Add Kconfig scripts and related material
Adjust Kconfig scripts for use by U-Boot
Enable Kconfig for U-Boot
Switch over to Kbuild

 .gitignore                                 |    6 +
 Kconfig                                    |   11 +
 Makefile                                   | 2147 +++++++++++++++---------
 Makefile.legacy                            |  900 ++++++++++
 arch/Kconfig                               |    0
 arch/arm/Kconfig                           |    0
 arch/arm/Makefile                          |   20 +
 arch/arm/cpu/Makefile                      |   23 +
 arch/arm/cpu/armv7/Makefile                |   11 +-
 arch/arm/cpu/armv7/s5p-common/Makefile     |    3 +-
 arch/arm/cpu/tegra-common/Makefile         |    5 +-
 arch/arm/cpu/tegra20-common/Makefile       |    5 +-
 arch/arm/cpu/u-boot.lds                    |    2 +-
 arch/arm/lib/Makefile                      |    6 +-
 arch/sandbox/Kconfig                       |    8 +
 arch/sandbox/Makefile                      |   20 +
 arch/sandbox/cpu/Makefile                  |    2 +
 arch/sandbox/lib/Makefile                  |    4 +
 arch/x86/Kconfig                           |    0
 arch/x86/Makefile                          |   24 +
 config.mk                                  |    5 +
 doc/Makefile                               |   20 +
 drivers/Makefile                           |   47 +
 drivers/bios_emulator/Makefile             |    4 +
 drivers/bootcount/Makefile                 |    2 +-
 drivers/fpga/Makefile                      |    2 +-
 drivers/gpio/Makefile                      |    1 -
 drivers/mtd/Makefile                       |    2 +
 drivers/mtd/nand/Makefile                  |   21 +-
 drivers/mtd/ubi/Makefile                   |   10 +-
 drivers/power/Makefile                     |    2 +
 drivers/usb/Makefile                       |   26 +
 drivers/usb/gadget/Makefile                |    4 +-
 drivers/usb/musb-new/Makefile              |    4 +
 fs/Makefile                                |    4 +
 fs/ext4/Makefile                           |    5 +-
 fs/fat/Makefile                            |    5 +-
 fs/sandbox/Makefile                        |    5 +-
 include/linux/kconfig.h                    |   46 +
 init/Makefile                              |   21 +
 init/main.c                                |    0
 lib/Makefile                               |    3 +
 rules.mk                                   |   25 +
 scripts/Kbuild.include                     |  278 +++
 scripts/Makefile                           |   37 +
 scripts/Makefile.asm-generic               |   24 +
 scripts/Makefile.autoconf                  |   68 +
 scripts/Makefile.build                     |  479 ++++++
 scripts/Makefile.clean                     |  104 ++
 scripts/Makefile.host                      |  170 ++
 scripts/Makefile.lib                       |  380 +++++
 scripts/Makefile.modpost                   |  148 ++
 scripts/basic/.gitignore                   |    1 +
 scripts/basic/Makefile                     |   15 +
 scripts/basic/fixdep.c                     |  433 +++++
 scripts/gcc-goto.sh                        |   21 +
 scripts/kconfig/.gitignore                 |   22 +
 scripts/kconfig/Makefile                   |  336 ++++
 scripts/kconfig/POTFILES.in                |   12 +
 scripts/kconfig/check.sh                   |   14 +
 scripts/kconfig/conf.c                     |  701 ++++++++
 scripts/kconfig/confdata.c                 | 1164 +++++++++++++
 scripts/kconfig/expr.c                     | 1168 +++++++++++++
 scripts/kconfig/expr.h                     |  235 +++
 scripts/kconfig/gconf.c                    | 1542 +++++++++++++++++
 scripts/kconfig/gconf.glade                |  661 ++++++++
 scripts/kconfig/images.c                   |  326 ++++
 scripts/kconfig/kxgettext.c                |  235 +++
 scripts/kconfig/list.h                     |   91 +
 scripts/kconfig/lkc.h                      |  198 +++
 scripts/kconfig/lkc_proto.h                |   56 +
 scripts/kconfig/lxdialog/.gitignore        |    4 +
 scripts/kconfig/lxdialog/BIG.FAT.WARNING   |    4 +
 scripts/kconfig/lxdialog/check-lxdialog.sh |   85 +
 scripts/kconfig/lxdialog/checklist.c       |  332 ++++
 scripts/kconfig/lxdialog/dialog.h          |  236 +++
 scripts/kconfig/lxdialog/inputbox.c        |  301 ++++
 scripts/kconfig/lxdialog/menubox.c         |  436 +++++
 scripts/kconfig/lxdialog/textbox.c         |  408 +++++
 scripts/kconfig/lxdialog/util.c            |  664 ++++++++
 scripts/kconfig/lxdialog/yesno.c           |  114 ++
 scripts/kconfig/mconf.c                    |  963 +++++++++++
 scripts/kconfig/menu.c                     |  644 +++++++
 scripts/kconfig/merge_config.sh            |  142 ++
 scripts/kconfig/nconf.c                    | 1558 +++++++++++++++++
 scripts/kconfig/nconf.gui.c                |  654 ++++++++
 scripts/kconfig/nconf.h                    |   96 ++
 scripts/kconfig/qconf.cc                   | 1790 ++++++++++++++++++++
 scripts/kconfig/qconf.h                    |  337 ++++
 scripts/kconfig/streamline_config.pl       |  634 +++++++
 scripts/kconfig/symbol.c                   | 1310 +++++++++++++++
 scripts/kconfig/util.c                     |  159 ++
 scripts/kconfig/zconf.gperf                |   47 +
 scripts/kconfig/zconf.hash.c_shipped       |  286 ++++
 scripts/kconfig/zconf.l                    |  364 ++++
 scripts/kconfig/zconf.lex.c_shipped        | 2420 +++++++++++++++++++++++++++
 scripts/kconfig/zconf.tab.c_shipped        | 2504 ++++++++++++++++++++++++++++
 scripts/kconfig/zconf.y                    |  740 ++++++++
 scripts/link-vmlinux.sh                    |  227 +++
 scripts/mkcompile_h                        |  100 ++
 scripts/mksysmap                           |   45 +
 scripts/mod/.gitignore                     |    5 +
 scripts/mod/Makefile                       |   51 +
 scripts/mod/devicetable-offsets.c          |  178 ++
 scripts/mod/empty.c                        |    1 +
 scripts/mod/file2alias.c                   | 1236 ++++++++++++++
 scripts/mod/mk_elfconfig.c                 |   57 +
 scripts/mod/modpost.c                      | 2222 ++++++++++++++++++++++++
 scripts/mod/modpost.h                      |  187 +++
 scripts/mod/sumversion.c                   |  519 ++++++
 scripts/setlocalversion                    |  176 ++
 111 files changed, 33813 insertions(+), 803 deletions(-)
 create mode 100644 Kconfig
 create mode 100644 Makefile.legacy
 create mode 100644 arch/Kconfig
 create mode 100644 arch/arm/Kconfig
 create mode 100644 arch/arm/Makefile
 create mode 100644 arch/arm/cpu/Makefile
 create mode 100644 arch/sandbox/Kconfig
 create mode 100644 arch/sandbox/Makefile
 create mode 100644 arch/x86/Kconfig
 create mode 100644 arch/x86/Makefile
 create mode 100644 doc/Makefile
 create mode 100644 drivers/Makefile
 create mode 100644 drivers/usb/Makefile
 create mode 100644 include/linux/kconfig.h
 create mode 100644 init/Makefile
 create mode 100644 init/main.c
 create mode 100644 scripts/Kbuild.include
 create mode 100644 scripts/Makefile
 create mode 100644 scripts/Makefile.asm-generic
 create mode 100644 scripts/Makefile.autoconf
 create mode 100644 scripts/Makefile.build
 create mode 100644 scripts/Makefile.clean
 create mode 100644 scripts/Makefile.host
 create mode 100644 scripts/Makefile.lib
 create mode 100644 scripts/Makefile.modpost
 create mode 100644 scripts/basic/.gitignore
 create mode 100644 scripts/basic/Makefile
 create mode 100644 scripts/basic/fixdep.c
 create mode 100644 scripts/gcc-goto.sh
 create mode 100644 scripts/kconfig/.gitignore
 create mode 100644 scripts/kconfig/Makefile
 create mode 100644 scripts/kconfig/POTFILES.in
 create mode 100755 scripts/kconfig/check.sh
 create mode 100644 scripts/kconfig/conf.c
 create mode 100644 scripts/kconfig/confdata.c
 create mode 100644 scripts/kconfig/expr.c
 create mode 100644 scripts/kconfig/expr.h
 create mode 100644 scripts/kconfig/gconf.c
 create mode 100644 scripts/kconfig/gconf.glade
 create mode 100644 scripts/kconfig/images.c
 create mode 100644 scripts/kconfig/kxgettext.c
 create mode 100644 scripts/kconfig/list.h
 create mode 100644 scripts/kconfig/lkc.h
 create mode 100644 scripts/kconfig/lkc_proto.h
 create mode 100644 scripts/kconfig/lxdialog/.gitignore
 create mode 100644 scripts/kconfig/lxdialog/BIG.FAT.WARNING
 create mode 100644 scripts/kconfig/lxdialog/check-lxdialog.sh
 create mode 100644 scripts/kconfig/lxdialog/checklist.c
 create mode 100644 scripts/kconfig/lxdialog/dialog.h
 create mode 100644 scripts/kconfig/lxdialog/inputbox.c
 create mode 100644 scripts/kconfig/lxdialog/menubox.c
 create mode 100644 scripts/kconfig/lxdialog/textbox.c
 create mode 100644 scripts/kconfig/lxdialog/util.c
 create mode 100644 scripts/kconfig/lxdialog/yesno.c
 create mode 100644 scripts/kconfig/mconf.c
 create mode 100644 scripts/kconfig/menu.c
 create mode 100755 scripts/kconfig/merge_config.sh
 create mode 100644 scripts/kconfig/nconf.c
 create mode 100644 scripts/kconfig/nconf.gui.c
 create mode 100644 scripts/kconfig/nconf.h
 create mode 100644 scripts/kconfig/qconf.cc
 create mode 100644 scripts/kconfig/qconf.h
 create mode 100644 scripts/kconfig/streamline_config.pl
 create mode 100644 scripts/kconfig/symbol.c
 create mode 100644 scripts/kconfig/util.c
 create mode 100644 scripts/kconfig/zconf.gperf
 create mode 100644 scripts/kconfig/zconf.hash.c_shipped
 create mode 100644 scripts/kconfig/zconf.l
 create mode 100644 scripts/kconfig/zconf.lex.c_shipped
 create mode 100644 scripts/kconfig/zconf.tab.c_shipped
 create mode 100644 scripts/kconfig/zconf.y
 create mode 100644 scripts/link-vmlinux.sh
 create mode 100755 scripts/mkcompile_h
 create mode 100644 scripts/mksysmap
 create mode 100644 scripts/mod/.gitignore
 create mode 100644 scripts/mod/Makefile
 create mode 100644 scripts/mod/devicetable-offsets.c
 create mode 100644 scripts/mod/empty.c
 create mode 100644 scripts/mod/file2alias.c
 create mode 100644 scripts/mod/mk_elfconfig.c
 create mode 100644 scripts/mod/modpost.c
 create mode 100644 scripts/mod/modpost.h
 create mode 100644 scripts/mod/sumversion.c
 create mode 100755 scripts/setlocalversion
Signature · 1 line
1.8.2.1
#1 lore raw

RFC PATCH 1/7 Add some required Kconfig files

We need a few of these just to get things started.

---
 Kconfig              | 11 +++++++++++
 arch/Kconfig         |  0
 arch/arm/Kconfig     |  0
 arch/sandbox/Kconfig |  8 ++++++++
 arch/x86/Kconfig     |  0
 5 files changed, 19 insertions(+)
 create mode 100644 Kconfig
 create mode 100644 arch/Kconfig
 create mode 100644 arch/arm/Kconfig
 create mode 100644 arch/sandbox/Kconfig
 create mode 100644 arch/x86/Kconfig
Kconfig new file +11 -0
new file mode 100644
index 0000000..8710334
@@ -0,0 +1,11 @@
+#
+# For a description of the syntax of this configuration file,
+# see Linux's Documentation/kbuild/kconfig-language.txt file.
+#
+mainmenu "U-Boot/$ARCH $KERNELVERSION Configuration"
+
+config SRCARCH
+	string
+	option env="SRCARCH"
+
+source "arch/$SRCARCH/Kconfig"
arch/Kconfig new file +0 -0
new file mode 100644
index 0000000..e69de29
arch/arm/Kconfig new file +0 -0
new file mode 100644
index 0000000..e69de29
arch/sandbox/Kconfig new file +8 -0
new file mode 100644
index 0000000..cb3c10d
@@ -0,0 +1,8 @@
+
+config SANDBOX_BITS_PER_LONG
+	int	"Number of bits in a long"
+	default 64
+	help
+	  The length of a long integer in bits is normally 64, and
+	  is controlled by this option. Only change this if you know
+	  what you are doing.
arch/x86/Kconfig new file +0 -0
new file mode 100644
index 0000000..e69de29
Signature · 1 line
1.8.2.1
#2 lore raw

RFC PATCH 2/7 arm: Allow start.o to come from any directory

In reply to Simon Glass

Instead of explicitly speciying the directory for start.o, use any. There should be only one.

---
 arch/arm/cpu/u-boot.lds | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/cpu/u-boot.lds +1 -1
index d9bbee3..49d47d1 100644
@@ -34,7 +34,7 @@ SECTIONS
 	.text :
 	{
 		__image_copy_start = .;
-		CPUDIR/start.o (.text*)
+		*/start.o (.text*)
 		*(.text*)
 	}
 
Signature · 1 line
1.8.2.1
#3 lore raw

RFC PATCH 3/7 Tidy up Makefiles to use COBJS consistently

In reply to Simon Glass

Some Makefiles doen't define COBJS, but just use COBJS-y directly. This messes with our Kconfig script which uses COBJS to decide which objects are needed.

Also, for directories where COBJS produces an empty list, COBJS- must be defined and non-empty, otherwise Kconfig will not create the empty built-in.o file and the link will fail. So adjust things such that COBJS- is defined when needed.

Finally, Kconfig needs to know about subdirectories with the obj-y variable, so add these as needed.

All of the above changes should have no effect on the existing U-Boot build system.

---
 arch/arm/Makefile                      | 20 +++++++++++++++
 arch/arm/cpu/Makefile                  | 23 +++++++++++++++++
 arch/arm/cpu/armv7/Makefile            | 11 +++++---
 arch/arm/cpu/armv7/s5p-common/Makefile |  3 ++-
 arch/arm/cpu/tegra-common/Makefile     |  5 ++--
 arch/arm/cpu/tegra20-common/Makefile   |  5 ++--
 arch/arm/lib/Makefile                  |  6 +++--
 arch/sandbox/Makefile                  | 20 +++++++++++++++
 arch/sandbox/cpu/Makefile              |  2 ++
 arch/sandbox/lib/Makefile              |  4 +++
 arch/x86/Makefile                      | 24 +++++++++++++++++
 doc/Makefile                           | 20 +++++++++++++++
 drivers/Makefile                       | 47 ++++++++++++++++++++++++++++++++++
 drivers/bios_emulator/Makefile         |  4 +++
 drivers/bootcount/Makefile             |  2 +-
 drivers/fpga/Makefile                  |  2 +-
 drivers/gpio/Makefile                  |  1 -
 drivers/mtd/Makefile                   |  2 ++
 drivers/mtd/nand/Makefile              | 21 +++++++--------
 drivers/mtd/ubi/Makefile               | 10 +++-----
 drivers/power/Makefile                 |  2 ++
 drivers/usb/Makefile                   | 26 +++++++++++++++++++
 drivers/usb/gadget/Makefile            |  4 +--
 drivers/usb/musb-new/Makefile          |  4 +++
 fs/Makefile                            |  4 +++
 fs/ext4/Makefile                       |  5 ++--
 fs/fat/Makefile                        |  5 ++--
 fs/sandbox/Makefile                    |  5 ++--
 lib/Makefile                           |  3 +++
 29 files changed, 251 insertions(+), 39 deletions(-)
 create mode 100644 arch/arm/Makefile
 create mode 100644 arch/arm/cpu/Makefile
 create mode 100644 arch/sandbox/Makefile
 create mode 100644 arch/x86/Makefile
 create mode 100644 doc/Makefile
 create mode 100644 drivers/Makefile
 create mode 100644 drivers/usb/Makefile
arch/arm/Makefile new file +20 -0
new file mode 100644
index 0000000..bb9b8fd
@@ -0,0 +1,20 @@
+#
+# (C) Copyright 2013 Google, Inc
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundatio; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+obj-y += cpu/ lib/
arch/arm/cpu/Makefile new file +23 -0
new file mode 100644
index 0000000..2774a96
@@ -0,0 +1,23 @@
+#
+# (C) Copyright 2013 Google, Inc
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundatio; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+obj-y += $(CPU)/
+
+obj-$(CONFIG_TEGRA) += tegra-common/
+obj-$(CONFIG_TEGRA) += $(SOC)-common/
arch/arm/cpu/armv7/Makefile +8 -3
index 7a8c2d0..734a662 100644
@@ -25,7 +25,12 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(CPU).o
 
-START	:= start.o
+obj-y	+= $(SOC)/
+ifeq ($(SOC),exynos)
+obj-y	+= s5p-common/
+endif
+
+STARTOBJS	:= start.o
 
 COBJS	+= cache_v7.o
 
@@ -36,9 +41,9 @@ ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONF
 SOBJS	+= lowlevel_init.o
 endif
 
-SRCS	:= $(START:.o=.S) $(COBJS:.o=.c)
+SRCS	:= $(STARTOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
-START	:= $(addprefix $(obj),$(START))
+START	:= $(addprefix $(obj),$(STARTOBJS))
 
 all:	$(obj).depend $(START) $(LIB)
 
arch/arm/cpu/armv7/s5p-common/Makefile +2 -1
index 1705399..3b2b0c2 100644
@@ -30,8 +30,9 @@ COBJS-y		+= timer.o
 COBJS-y		+= sromc.o
 COBJS-$(CONFIG_PWM)	+= pwm.o
 
+COBJS	:= $(COBJS-y)
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS-y) $(SOBJS))
+OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
 
 all:	 $(obj).depend $(LIB)
 
arch/arm/cpu/tegra-common/Makefile +3 -2
index 4e0301c..d5282b9 100644
@@ -30,8 +30,9 @@ LIB	= $(obj)libcputegra-common.o
 SOBJS += lowlevel_init.o
 COBJS-y	+= ap.o board.o sys_info.o timer.o clock.o cache.o
 
-SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS-y))
+COBJS	:= $(COBJS-y)
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
 
 all:	$(obj).depend $(LIB)
 
arch/arm/cpu/tegra20-common/Makefile +3 -2
index 8184e5e..8153cd8 100644
@@ -36,8 +36,9 @@ COBJS-$(CONFIG_TEGRA_LP0) += warmboot.o crypto.o warmboot_avp.o
 COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o
 COBJS-$(CONFIG_TEGRA_PMU) += pmu.o
 
-SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS-y))
+COBJS	:= $(COBJS-y)
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
 
 all:	$(obj).depend $(LIB)
 
arch/arm/lib/Makefile +4 -2
index 6ae161a..5f13591 100644
@@ -58,9 +58,11 @@ COBJS-y	+= reset.o
 COBJS-y	+= cache.o
 COBJS-y	+= cache-cp15.o
 
+COBJS	:= $(COBJS-y)
+SOBJS	:= $(SOBJS-y)
 SRCS	:= $(GLSOBJS:.o=.S) $(GLCOBJS:.o=.c) \
-	   $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
+	   $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
 LGOBJS	:= $(addprefix $(obj),$(GLSOBJS)) \
 	   $(addprefix $(obj),$(GLCOBJS))
 
arch/sandbox/Makefile new file +20 -0
new file mode 100644
index 0000000..bb9b8fd
@@ -0,0 +1,20 @@
+#
+# (C) Copyright 2013 Google, Inc
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundatio; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+obj-y += cpu/ lib/
arch/sandbox/cpu/Makefile +2 -0
index 6fd09ff..5f6d798 100644
@@ -25,6 +25,8 @@
 
 include $(TOPDIR)/config.mk
 
+CFLAGS_REMOVE_os.o = -nostdinc
+
 LIB	= $(obj)lib$(CPU).o
 
 COBJS	:= cpu.o os.o start.o state.o
arch/sandbox/lib/Makefile +4 -0
index 3aad574..807990d 100644
@@ -32,6 +32,10 @@ COBJS-y	+= interrupts.o
 SRCS	:= $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS-y))
 
+COBJS-y	+= interrupts.o
+
+COBJS := $(COBJS-y)
+
 # Always build libsandbox.o
 TARGETS	:= $(LIB)
 
arch/x86/Makefile new file +24 -0
new file mode 100644
index 0000000..59250ce
@@ -0,0 +1,24 @@
+#
+# (C) Copyright 2013 Google, Inc
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundatio; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+extra-y := $(head-y) vmlinux.lds
+
+obj-y                          := x86.o
+
+core-y += arch/x86/
doc/Makefile new file +20 -0
new file mode 100644
index 0000000..851a0ff
@@ -0,0 +1,20 @@
+#
+# (C) Copyright 2013 Google, Inc
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundatio; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+# This is currently empty, but required by the Kbuild makefile
drivers/Makefile new file +47 -0

47 lines not on this page · raw message

drivers/bios_emulator/Makefile +4 -0
index d94a144..5a9ad70 100644
@@ -21,9 +21,13 @@ OBJS	:= $(addprefix $(obj),$(COBJS))
 EXTRA_CFLAGS += -I. -I./include -I$(TOPDIR)/include \
 	-D__PPC__  -D__BIG_ENDIAN__
 
+ifeq ($(KCONFIG_CONFIG),)
 CFLAGS += $(EXTRA_CFLAGS)
 HOSTCFLAGS += $(EXTRA_CFLAGS)
 CPPFLAGS += $(EXTRA_CFLAGS)
+else
+ccflags-y += $(EXTRA_CFLAGS)
+endif
 
 all:	$(LIB)
 
drivers/bootcount/Makefile +1 -1
index a8d0ac7..3e66271 100644
@@ -22,7 +22,7 @@ include $(TOPDIR)/config.mk
 
 LIB 	:= $(obj)libbootcount.o
 
-COBJS-y				+= bootcount.o
+COBJS-$(CONFIG_BOOTCOUNT_LIMIT)	+= bootcount.o
 COBJS-$(CONFIG_AT91SAM9XE)	+= bootcount_at91.o
 COBJS-$(CONFIG_BLACKFIN)	+= bootcount_blackfin.o
 COBJS-$(CONFIG_SOC_DA8XX)	+= bootcount_davinci.o
drivers/fpga/Makefile +1 -1
index b48f623..f4249f3 100644
@@ -25,8 +25,8 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)libfpga.o
 
+COBJS-$(CONFIG_FPGA) += fpga.o
 ifdef CONFIG_FPGA
-COBJS-y += fpga.o
 COBJS-$(CONFIG_FPGA_SPARTAN2) += spartan2.o
 COBJS-$(CONFIG_FPGA_SPARTAN3) += spartan3.o
 COBJS-$(CONFIG_FPGA_VIRTEX2) += virtex2.o
drivers/gpio/Makefile +0 -1
index 830e8e6..9df1e26 100644
@@ -47,7 +47,6 @@ COBJS-$(CONFIG_OMAP_GPIO)	+= omap_gpio.o
 COBJS-$(CONFIG_DB8500_GPIO)	+= db8500_gpio.o
 COBJS-$(CONFIG_BCM2835_GPIO)	+= bcm2835_gpio.o
 COBJS-$(CONFIG_S3C2440_GPIO)	+= s3c2440_gpio.o
-COBJS-$(CONFIG_XILINX_GPIO)	+= xilinx_gpio.o
 
 COBJS	:= $(COBJS-y)
 SRCS 	:= $(COBJS:.o=.c)
drivers/mtd/Makefile +2 -0
index 543c845..5bc7b8b 100644
@@ -25,6 +25,8 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)libmtd.o
 
+obj-y += spi/ nand/ onenand/ ubi/
+
 COBJS-$(CONFIG_MTD_DEVICE) += mtdcore.o
 COBJS-$(CONFIG_MTD_PARTITIONS) += mtdpart.o
 COBJS-$(CONFIG_MTD_CONCAT) += mtdconcat.o
drivers/mtd/nand/Makefile +9 -12
index 35769c5..9fbba43 100644
@@ -25,12 +25,10 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)libnand.o
 
-ifdef CONFIG_CMD_NAND
-
 ifdef CONFIG_SPL_BUILD
 
 ifdef CONFIG_SPL_NAND_DRIVERS
-NORMAL_DRIVERS=y
+NORMAL_DRIVERS=$(CONFIG_CMD_NAND)
 endif
 
 COBJS-$(CONFIG_SPL_NAND_AM33XX_BCH) += am335x_spl_bch.o
@@ -41,18 +39,18 @@ COBJS-$(CONFIG_SPL_NAND_BASE) += nand_base.o
 
 else # not spl
 
-NORMAL_DRIVERS=y
+NORMAL_DRIVERS=$(CONFIG_CMD_NAND)
 
-COBJS-y += nand.o
-COBJS-y += nand_bbt.o
-COBJS-y += nand_ids.o
-COBJS-y += nand_util.o
-COBJS-y += nand_ecc.o
-COBJS-y += nand_base.o
+COBJS-$(CONFIG_CMD_NAND) += nand.o
+COBJS-$(CONFIG_CMD_NAND) += nand_bbt.o
+COBJS-$(CONFIG_CMD_NAND) += nand_ids.o
+COBJS-$(CONFIG_CMD_NAND) += nand_util.o
+COBJS-$(CONFIG_CMD_NAND) += nand_ecc.o
+COBJS-$(CONFIG_CMD_NAND) += nand_base.o
 
 endif # not spl
 
-ifdef NORMAL_DRIVERS
+ifeq ($NORMAL_DRIVERS),y)
 
 COBJS-$(CONFIG_NAND_ECC_BCH) += nand_bch.o
 
@@ -84,7 +82,6 @@ COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_spl.o
 COBJS-$(CONFIG_NAND_MXC) += mxc_nand_spl.o
 
 endif # drivers
-endif # nand
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
drivers/mtd/ubi/Makefile +4 -6
index b2e6014..ba338af 100644
@@ -25,12 +25,10 @@ include $(TOPDIR)/config.mk
 
 LIB 	:= $(obj)libubi.o
 
-ifdef CONFIG_CMD_UBI
-COBJS-y += build.o vtbl.o vmt.o upd.o kapi.o eba.o io.o wl.o scan.o crc32.o
-
-COBJS-y += misc.o
-COBJS-y += debug.o
-endif
+COBJS-$(CONFIG_CMD_UBI) += build.o vtbl.o vmt.o upd.o kapi.o eba.o
+COBJS-$(CONFIG_CMD_UBI) += io.o wl.o scan.o crc32.o
+COBJS-$(CONFIG_CMD_UBI) += misc.o
+COBJS-$(CONFIG_CMD_UBI) += debug.o
 
 COBJS	:= $(COBJS-y)
 SRCS 	:= $(COBJS:.o=.c)
drivers/power/Makefile +2 -0
index 1dac16a..d5c50b4 100644
@@ -25,6 +25,8 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)libpower.o
 
+obj-y	+= battery/ fuel_gauge/ pmic/
+
 COBJS-$(CONFIG_EXYNOS_TMU)	+= exynos-tmu.o
 COBJS-$(CONFIG_FTPMU010_POWER)	+= ftpmu010.o
 COBJS-$(CONFIG_TPS6586X_POWER)	+= tps6586x.o
drivers/usb/Makefile new file +26 -0
new file mode 100644
index 0000000..dfbe8eb
@@ -0,0 +1,26 @@
+#
+# (C) Copyright 2013 Google, Inc
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundatio; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+obj-y += eth/
+obj-y += gadget/
+obj-y += host/
+obj-y += musb/
+obj-y += musb-new/
+obj-y += phy/
+obj-y += ulpi/
drivers/usb/gadget/Makefile +2 -2
index e545b6b..b6a5b07 100644
@@ -45,9 +45,9 @@ COBJS-$(CONFIG_MV_UDC)	+= mv_udc.o
 COBJS-$(CONFIG_CPU_PXA25X) += pxa25x_udc.o
 else
 # Devices not related to the new gadget layer depend on CONFIG_USB_DEVICE
+COBJS-$(CONFIG_USB_DEVICE) += core.o
+COBJS-$(CONFIG_USB_DEVICE) += ep0.o
 ifdef CONFIG_USB_DEVICE
-COBJS-y += core.o
-COBJS-y += ep0.o
 COBJS-$(CONFIG_DW_UDC) += designware_udc.o
 COBJS-$(CONFIG_OMAP1510) += omap1510_udc.o
 COBJS-$(CONFIG_OMAP1610) += omap1510_udc.o
drivers/usb/musb-new/Makefile +4 -0
index c23bef1..25b4dfe 100644
@@ -16,7 +16,11 @@ COBJS-$(CONFIG_USB_MUSB_OMAP2PLUS) += omap2430.o
 CFLAGS_NO_WARN := $(call cc-option,-Wno-unused-variable) \
 			$(call cc-option,-Wno-unused-but-set-variable) \
 			$(call cc-option,-Wno-unused-label)
+ifeq ($(KCONFIG_CONFIG),)
 CFLAGS += $(CFLAGS_NO_WARN)
+else
+ccflags-y += $(CFLAGS_NO_WARN)
+endif
 
 COBJS	:= $(sort $(COBJS-y))
 SRCS	:= $(COBJS:.o=.c)
fs/Makefile +4 -0
index d0ab3ae..ab5e62d 100644
@@ -28,6 +28,10 @@ LIB	= $(obj)libfs.o
 
 COBJS-y				+= fs.o
 
+obj-y	+= ext4/
+obj-y	+= fat/
+obj-y	+= sandbox/
+
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
fs/ext4/Makefile +3 -2
index 3bde824..8ea2124 100644
@@ -33,8 +33,9 @@ AOBJS	=
 COBJS-$(CONFIG_FS_EXT4) := ext4fs.o ext4_common.o dev.o
 COBJS-$(CONFIG_EXT4_WRITE) += ext4_write.o ext4_journal.o crc16.o
 
-SRCS	:= $(AOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS	:= $(addprefix $(obj),$(AOBJS) $(COBJS-y))
+COBJS	:= $(COBJS-y)
+SRCS	:= $(AOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(AOBJS) $(COBJS))
 
 
 all:	$(LIB) $(AOBJS)
fs/fat/Makefile +3 -2
index 969715b..89c8439 100644
@@ -31,8 +31,9 @@ ifndef CONFIG_SPL_BUILD
 COBJS-$(CONFIG_FS_FAT)	+= file.o
 endif
 
-SRCS	:= $(AOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS	:= $(addprefix $(obj),$(AOBJS) $(COBJS-y))
+COBJS	:= $(COBJS-y)
+SRCS	:= $(AOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(AOBJS) $(COBJS))
 
 all:	$(LIB) $(AOBJS)
 
fs/sandbox/Makefile +3 -2
index b3155b0..f192d00 100644
@@ -29,8 +29,9 @@ LIB	= $(obj)libsandboxfs.o
 
 COBJS-$(CONFIG_SANDBOX) := sandboxfs.o
 
-SRCS	:= $(COBJS-y:.o=.c)
-OBJS	:= $(addprefix $(obj),$(AOBJS) $(COBJS-y))
+COBJS	:= $(COBJS-y)
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(AOBJS) $(COBJS))
 
 all:	$(LIB) $(AOBJS)
 
lib/Makefile +3 -0
index 8f81862..f4b14a2 100644
@@ -25,6 +25,9 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)libgeneric.o
 
+obj-y += libfdt/
+obj-y += zlib/
+
 ifndef CONFIG_SPL_BUILD
 COBJS-$(CONFIG_ADDR_MAP) += addr_map.o
 COBJS-$(CONFIG_AES) += aes.o
Signature · 1 line
1.8.2.1
#4 lore raw

RFC PATCH 3/7 Tidy up Makefiles to use COBJS consistently

Quoted 9 lines · Simon Glass

Some Makefiles doen't define COBJS, but just use COBJS-y directly. This messes with our Kconfig script which uses COBJS to decide which objects are needed.

Also, for directories where COBJS produces an empty list, COBJS- must be defined and non-empty, otherwise Kconfig will not create the empty built-in.o file and the link will fail. So adjust things such that COBJS- is defined when needed.

Quoted 5 lines

Finally, Kconfig needs to know about subdirectories with the obj-y variable, so add these as needed.

All of the above changes should have no effect on the existing U-Boot build system.

Except for the obj-y for directories stuff, the other bits are cleanups for what we have today yes? If so, lets get them separated out and merged in soon rather than later. One less patch to carry.

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130529/a10b3c14/attachment.pgp>
#5 lore raw

RFC PATCH 4/7 Add Kconfig scripts and related material

In reply to Simon Glass

This is taken from the Linux kernel 3.8-rc7.

---
 Makefile.kbuild                            | 1496 +++++++++++++++++
 include/linux/kconfig.h                    |   46 +
 scripts/Kbuild.include                     |  278 +++
 scripts/Makefile                           |   42 +
 scripts/Makefile.asm-generic               |   24 +
 scripts/Makefile.autoconf                  |   68 +
 scripts/Makefile.build                     |  478 ++++++
 scripts/Makefile.clean                     |  104 ++
 scripts/Makefile.host                      |  170 ++
 scripts/Makefile.lib                       |  378 +++++
 scripts/Makefile.modpost                   |  148 ++
 scripts/basic/.gitignore                   |    1 +
 scripts/basic/Makefile                     |   15 +
 scripts/basic/fixdep.c                     |  433 +++++
 scripts/gcc-goto.sh                        |   21 +
 scripts/kconfig/.gitignore                 |   22 +
 scripts/kconfig/Makefile                   |  325 ++++
 scripts/kconfig/POTFILES.in                |   12 +
 scripts/kconfig/check.sh                   |   14 +
 scripts/kconfig/conf.c                     |  701 ++++++++
 scripts/kconfig/confdata.c                 | 1164 +++++++++++++
 scripts/kconfig/expr.c                     | 1168 +++++++++++++
 scripts/kconfig/expr.h                     |  235 +++
 scripts/kconfig/gconf.c                    | 1542 +++++++++++++++++
 scripts/kconfig/gconf.glade                |  661 ++++++++
 scripts/kconfig/images.c                   |  326 ++++
 scripts/kconfig/kxgettext.c                |  235 +++
 scripts/kconfig/list.h                     |   91 +
 scripts/kconfig/lkc.h                      |  198 +++
 scripts/kconfig/lkc_proto.h                |   56 +
 scripts/kconfig/lxdialog/.gitignore        |    4 +
 scripts/kconfig/lxdialog/BIG.FAT.WARNING   |    4 +
 scripts/kconfig/lxdialog/check-lxdialog.sh |   85 +
 scripts/kconfig/lxdialog/checklist.c       |  332 ++++
 scripts/kconfig/lxdialog/dialog.h          |  236 +++
 scripts/kconfig/lxdialog/inputbox.c        |  301 ++++
 scripts/kconfig/lxdialog/menubox.c         |  436 +++++
 scripts/kconfig/lxdialog/textbox.c         |  408 +++++
 scripts/kconfig/lxdialog/util.c            |  664 ++++++++
 scripts/kconfig/lxdialog/yesno.c           |  114 ++
 scripts/kconfig/mconf.c                    |  963 +++++++++++
 scripts/kconfig/menu.c                     |  644 +++++++
 scripts/kconfig/merge_config.sh            |  142 ++
 scripts/kconfig/nconf.c                    | 1558 +++++++++++++++++
 scripts/kconfig/nconf.gui.c                |  654 ++++++++
 scripts/kconfig/nconf.h                    |   96 ++
 scripts/kconfig/qconf.cc                   | 1790 ++++++++++++++++++++
 scripts/kconfig/qconf.h                    |  337 ++++
 scripts/kconfig/streamline_config.pl       |  634 +++++++
 scripts/kconfig/symbol.c                   | 1310 +++++++++++++++
 scripts/kconfig/util.c                     |  159 ++
 scripts/kconfig/zconf.gperf                |   47 +
 scripts/kconfig/zconf.hash.c_shipped       |  286 ++++
 scripts/kconfig/zconf.l                    |  364 ++++
 scripts/kconfig/zconf.lex.c_shipped        | 2420 +++++++++++++++++++++++++++
 scripts/kconfig/zconf.tab.c_shipped        | 2504 ++++++++++++++++++++++++++++
 scripts/kconfig/zconf.y                    |  740 ++++++++
 scripts/link-vmlinux.sh                    |  226 +++
 scripts/mkcompile_h                        |  100 ++
 scripts/mksysmap                           |   45 +
 scripts/mod/.gitignore                     |    5 +
 scripts/mod/Makefile                       |   51 +
 scripts/mod/devicetable-offsets.c          |  178 ++
 scripts/mod/empty.c                        |    1 +
 scripts/mod/file2alias.c                   | 1236 ++++++++++++++
 scripts/mod/mk_elfconfig.c                 |   57 +
 scripts/mod/modpost.c                      | 2222 ++++++++++++++++++++++++
 scripts/mod/modpost.h                      |  187 +++
 scripts/mod/sumversion.c                   |  519 ++++++
 scripts/setlocalversion                    |  176 ++
 70 files changed, 32687 insertions(+)
 create mode 100644 Makefile.kbuild
 create mode 100644 include/linux/kconfig.h
 create mode 100644 scripts/Kbuild.include
 create mode 100644 scripts/Makefile
 create mode 100644 scripts/Makefile.asm-generic
 create mode 100644 scripts/Makefile.autoconf
 create mode 100644 scripts/Makefile.build
 create mode 100644 scripts/Makefile.clean
 create mode 100644 scripts/Makefile.host
 create mode 100644 scripts/Makefile.lib
 create mode 100644 scripts/Makefile.modpost
 create mode 100644 scripts/basic/.gitignore
 create mode 100644 scripts/basic/Makefile
 create mode 100644 scripts/basic/fixdep.c
 create mode 100644 scripts/gcc-goto.sh
 create mode 100644 scripts/kconfig/.gitignore
 create mode 100644 scripts/kconfig/Makefile
 create mode 100644 scripts/kconfig/POTFILES.in
 create mode 100755 scripts/kconfig/check.sh
 create mode 100644 scripts/kconfig/conf.c
 create mode 100644 scripts/kconfig/confdata.c
 create mode 100644 scripts/kconfig/expr.c
 create mode 100644 scripts/kconfig/expr.h
 create mode 100644 scripts/kconfig/gconf.c
 create mode 100644 scripts/kconfig/gconf.glade
 create mode 100644 scripts/kconfig/images.c
 create mode 100644 scripts/kconfig/kxgettext.c
 create mode 100644 scripts/kconfig/list.h
 create mode 100644 scripts/kconfig/lkc.h
 create mode 100644 scripts/kconfig/lkc_proto.h
 create mode 100644 scripts/kconfig/lxdialog/.gitignore
 create mode 100644 scripts/kconfig/lxdialog/BIG.FAT.WARNING
 create mode 100644 scripts/kconfig/lxdialog/check-lxdialog.sh
 create mode 100644 scripts/kconfig/lxdialog/checklist.c
 create mode 100644 scripts/kconfig/lxdialog/dialog.h
 create mode 100644 scripts/kconfig/lxdialog/inputbox.c
 create mode 100644 scripts/kconfig/lxdialog/menubox.c
 create mode 100644 scripts/kconfig/lxdialog/textbox.c
 create mode 100644 scripts/kconfig/lxdialog/util.c
 create mode 100644 scripts/kconfig/lxdialog/yesno.c
 create mode 100644 scripts/kconfig/mconf.c
 create mode 100644 scripts/kconfig/menu.c
 create mode 100755 scripts/kconfig/merge_config.sh
 create mode 100644 scripts/kconfig/nconf.c
 create mode 100644 scripts/kconfig/nconf.gui.c
 create mode 100644 scripts/kconfig/nconf.h
 create mode 100644 scripts/kconfig/qconf.cc
 create mode 100644 scripts/kconfig/qconf.h
 create mode 100644 scripts/kconfig/streamline_config.pl
 create mode 100644 scripts/kconfig/symbol.c
 create mode 100644 scripts/kconfig/util.c
 create mode 100644 scripts/kconfig/zconf.gperf
 create mode 100644 scripts/kconfig/zconf.hash.c_shipped
 create mode 100644 scripts/kconfig/zconf.l
 create mode 100644 scripts/kconfig/zconf.lex.c_shipped
 create mode 100644 scripts/kconfig/zconf.tab.c_shipped
 create mode 100644 scripts/kconfig/zconf.y
 create mode 100644 scripts/link-vmlinux.sh
 create mode 100755 scripts/mkcompile_h
 create mode 100644 scripts/mksysmap
 create mode 100644 scripts/mod/.gitignore
 create mode 100644 scripts/mod/Makefile
 create mode 100644 scripts/mod/devicetable-offsets.c
 create mode 100644 scripts/mod/empty.c
 create mode 100644 scripts/mod/file2alias.c
 create mode 100644 scripts/mod/mk_elfconfig.c
 create mode 100644 scripts/mod/modpost.c
 create mode 100644 scripts/mod/modpost.h
 create mode 100644 scripts/mod/sumversion.c
 create mode 100755 scripts/setlocalversion
Makefile.kbuild new file +1496 -0
new file mode 100644
index 0000000..2547cca
@@ -0,0 +1,1496 @@
+VERSION = 2013
+PATCHLEVEL = 04
+SUBLEVEL =
+EXTRAVERSION =
+NAME = Unicycling Gorilla
+
+# *DOCUMENTATION*
+# To see a list of typical targets execute "make help"
+# More info can be located in ./README
+# Comments in this file are targeted only to the developer, do not
+# expect to learn how to build the kernel reading this file.
+
+# Do not:
+# o  use make's built-in rules and variables
+#    (this increases performance and avoids hard-to-debug behaviour);
+# o  print "Entering directory ...";
+MAKEFLAGS += -rR --no-print-directory
+
+# Avoid funny character set dependencies
+unexport LC_ALL
+LC_COLLATE=C
+LC_NUMERIC=C
+export LC_COLLATE LC_NUMERIC
+
+# We are using a recursive build, so we need to do a little thinking
+# to get the ordering right.
+#
+# Most importantly: sub-Makefiles should only ever modify files in
+# their own directory. If in some directory we have a dependency on
+# a file in another dir (which doesn't happen often, but it's often
+# unavoidable when linking the built-in.o targets which finally
+# turn into vmlinux), we will call a sub make in that other dir, and
+# after that we are sure that everything which is in that other dir
+# is now up to date.
+#
+# The only cases where we need to modify files which have global
+# effects are thus separated out and done before the recursive
+# descending is started. They are now explicitly listed as the
+# prepare rule.
+
+# To put more focus on warnings, be less verbose as default
+# Use 'make V=1' to see the full commands
+
+ifeq ("$(origin V)", "command line")
+  KBUILD_VERBOSE = $(V)
+endif
+ifndef KBUILD_VERBOSE
+  KBUILD_VERBOSE = 0
+endif
+
+# Call a source code checker (by default, "sparse") as part of the
+# C compilation.
+#
+# Use 'make C=1' to enable checking of only re-compiled files.
+# Use 'make C=2' to enable checking of *all* source files, regardless
+# of whether they are re-compiled or not.
+#
+# See the file "Documentation/sparse.txt" for more details, including
+# where to get the "sparse" utility.
+
+ifeq ("$(origin C)", "command line")
+  KBUILD_CHECKSRC = $(C)
+endif
+ifndef KBUILD_CHECKSRC
+  KBUILD_CHECKSRC = 0
+endif
+
+# Use make M=dir to specify directory of external module to build
+# Old syntax make ... SUBDIRS=$PWD is still supported
+# Setting the environment variable KBUILD_EXTMOD take precedence
+ifdef SUBDIRS
+  KBUILD_EXTMOD ?= $(SUBDIRS)
+endif
+
+ifeq ("$(origin M)", "command line")
+  KBUILD_EXTMOD := $(M)
+endif
+
+# kbuild supports saving output files in a separate directory.
+# To locate output files in a separate directory two syntaxes are supported.
+# In both cases the working directory must be the root of the kernel src.
+# 1) O=
+# Use "make O=dir/to/store/output/files/"
+#
+# 2) Set KBUILD_OUTPUT
+# Set the environment variable KBUILD_OUTPUT to point to the directory
+# where the output files shall be placed.
+# export KBUILD_OUTPUT=dir/to/store/output/files/
+# make
+#
+# The O= assignment takes precedence over the KBUILD_OUTPUT environment
+# variable.
+
+
+# KBUILD_SRC is set on invocation of make in OBJ directory
+# KBUILD_SRC is not intended to be used by the regular user (for now)
+ifeq ($(KBUILD_SRC),)
+
+# OK, Make called in directory where kernel src resides
+# Do we want to locate output files in a separate directory?
+ifeq ("$(origin O)", "command line")
+  KBUILD_OUTPUT := $(O)
+endif
+
+ifeq ("$(origin W)", "command line")
+  export KBUILD_ENABLE_EXTRA_GCC_CHECKS := $(W)
+endif
+
+# That's our default target when none is given on the command line
+PHONY := _all
+_all:
+
+# Cancel implicit rules on top Makefile
+$(CURDIR)/Makefile Makefile: ;
+
+MKCONFIG	= $(srctree)/mkconfig
+
+ifneq ($(KBUILD_OUTPUT),)
+# Invoke a second make in the output directory, passing relevant variables
+# check that the output directory actually exists
+saved-output := $(KBUILD_OUTPUT)
+KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
+$(if $(KBUILD_OUTPUT),, \
+     $(error output directory "$(saved-output)" does not exist))
+
+PHONY += $(MAKECMDGOALS) sub-make
+
+$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
+	@:
+
+sub-make: FORCE
+	$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
+	KBUILD_SRC=$(CURDIR) \
+	KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
+	$(filter-out _all sub-make,$(MAKECMDGOALS))
+
+# Leave processing to above invocation of make
+skip-makefile := 1
+endif # ifneq ($(KBUILD_OUTPUT),)
+endif # ifeq ($(KBUILD_SRC),)
+
+# We process the rest of the Makefile if this is the final invocation of make
+ifeq ($(skip-makefile),)
+
+# If building an external module we do not care about the all: rule
+# but instead _all depend on modules
+PHONY += all
+ifeq ($(KBUILD_EXTMOD),)
+_all: all
+else
+_all: modules
+endif
+
+srctree		:= $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
+objtree		:= $(CURDIR)
+src		:= $(srctree)
+obj		:= $(objtree)
+
+VPATH		:= $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
+
+export srctree objtree VPATH
+
+# We use Makefile.kbuild instead of Makefile for now. To be removed.
+MAKEFILE_NAME := $(srctree)/Makefile.kbuild
+
+# U-Boot's directory nanes used by old Makefiles. To be removed.
+TOPDIR := $(srctree)
+SRCTREE := $(srctree)
+OBJTREE = $(objtree)
+export SRCTREE TOPDIR OBJTREE
+
+# Export U-Boot variables
+export BOARD CPU SOC VENDOR
+
+# SUBARCH tells the usermode build what the underlying arch is.  That is set
+# first, and if a usermode build is happening, the "ARCH=um" on the command
+# line overrides the setting of ARCH below.  If a native build is happening,
+# then ARCH is assigned, getting whatever value it gets normally, and
+# SUBARCH is subsequently ignored.
+
+SUBARCH := $(shell uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/ \
+				  -e s/sun4u/sparc64/ \
+				  -e s/arm.*/arm/ -e s/sa110/arm/ \
+				  -e s/s390x/s390/ -e s/parisc64/parisc/ \
+				  -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
+				  -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ )
+
+# Cross compiling and selecting different set of gcc/bin-utils
+# ---------------------------------------------------------------------------
+#
+# When performing cross compilation for other architectures ARCH shall be set
+# to the target architecture. (See arch/* for the possibilities).
+# ARCH can be set during invocation of make:
+# make ARCH=ia64
+# Another way is to have ARCH set in the environment.
+# The default ARCH is the host where make is executed.
+
+# CROSS_COMPILE specify the prefix used for all executables used
+# during compilation. Only gcc and related bin-utils executables
+# are prefixed with $(CROSS_COMPILE).
+# CROSS_COMPILE can be set on the command line
+# make CROSS_COMPILE=ia64-linux-
+# Alternatively CROSS_COMPILE can be set in the environment.
+# A third alternative is to store a setting in .config so that plain
+# "make" in the configured kernel build directory always uses that.
+# Default value for CROSS_COMPILE is not to prefix executables
+# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
+#ARCH		?= $(SUBARCH)
+CROSS_COMPILE	?= $(CONFIG_CROSS_COMPILE:"%"=%)
+
+# Architecture as present in compile.h
+UTS_MACHINE 	:= $(ARCH)
+SRCARCH 	:= $(ARCH)
+
+# Additional ARCH settings for x86
+ifeq ($(ARCH),i386)
+        SRCARCH := x86
+endif
+ifeq ($(ARCH),x86_64)
+        SRCARCH := x86
+endif
+
+# Additional ARCH settings for sparc
+ifeq ($(ARCH),sparc32)
+       SRCARCH := sparc
+endif
+ifeq ($(ARCH),sparc64)
+       SRCARCH := sparc
+endif
+
+# Additional ARCH settings for sh
+ifeq ($(ARCH),sh64)
+       SRCARCH := sh
+endif
+
+# Additional ARCH settings for tile
+ifeq ($(ARCH),tilepro)
+       SRCARCH := tile
+endif
+ifeq ($(ARCH),tilegx)
+       SRCARCH := tile
+endif
+
+# Where to locate arch specific headers
+hdr-arch  := $(SRCARCH)
+
+KCONFIG_CONFIG	?= .config
+export KCONFIG_CONFIG
+
+# SHELL used by kbuild
+CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
+	  else if [ -x /bin/bash ]; then echo /bin/bash; \
+	  else echo sh; fi ; fi)
+
+HOSTCC       = gcc
+HOSTCXX      = g++
+HOSTCFLAGS   = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer
+HOSTCXXFLAGS = -O2
+
+# Decide whether to build built-in, modular, or both.
+# Normally, just do built-in.
+
+KBUILD_MODULES :=
+KBUILD_BUILTIN := 1
+
+#	If we have only "make modules", don't compile built-in objects.
+#	When we're building modules with modversions, we need to consider
+#	the built-in objects during the descend as well, in order to
+#	make sure the checksums are up to date before we record them.
+
+ifeq ($(MAKECMDGOALS),modules)
+  KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
+endif
+
+#	If we have "make <whatever> modules", compile modules
+#	in addition to whatever we do anyway.
+#	Just "make" or "make all" shall build modules as well
+
+ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
+  KBUILD_MODULES := 1
+endif
+
+ifeq ($(MAKECMDGOALS),)
+  KBUILD_MODULES := 1
+endif
+
+# But for now at least, U-Boot does not have modules
+KBUILD_MODULES :=
+
+export KBUILD_MODULES KBUILD_BUILTIN
+export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
+
+# Beautify output
+# ---------------------------------------------------------------------------
+#
+# Normally, we echo the whole command before executing it. By making
+# that echo $($(quiet)$(cmd)), we now have the possibility to set
+# $(quiet) to choose other forms of output instead, e.g.
+#
+#         quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
+#         cmd_cc_o_c       = $(CC) $(c_flags) -c -o $@ $<
+#
+# If $(quiet) is empty, the whole command will be printed.
+# If it is set to "quiet_", only the short version will be printed.
+# If it is set to "silent_", nothing will be printed@all, since
+# the variable $(silent_cmd_cc_o_c) doesn't exist.
+#
+# A simple variant is to prefix commands with $(Q) - that's useful
+# for commands that shall be hidden in non-verbose mode.
+#
+#	$(Q)ln $@ :<
+#
+# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
+# If KBUILD_VERBOSE equals 1 then the above command is displayed.
+
+ifeq ($(KBUILD_VERBOSE),1)
+  quiet =
+  Q =
+else
+  quiet=quiet_
+  Q = @
+endif
+
+# If the user is running make -s (silent mode), suppress echoing of
+# commands
+
+ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
+  quiet=silent_
+endif
+
+export quiet Q KBUILD_VERBOSE
+
+
+# Look for make include files relative to root of kernel src
+MAKEFLAGS += --include-dir=$(srctree)
+
+# We need some generic definitions (do not try to remake the file).
+$(srctree)/scripts/Kbuild.include: ;
+include $(srctree)/scripts/Kbuild.include
+
+# Make variables (CC, etc...)
+
+AS		= $(CROSS_COMPILE)as
+LD		= $(CROSS_COMPILE)ld
+CC		= $(CROSS_COMPILE)gcc
+CPP		= $(CC) -E
+AR		= $(CROSS_COMPILE)ar
+NM		= $(CROSS_COMPILE)nm
+STRIP		= $(CROSS_COMPILE)strip
+OBJCOPY		= $(CROSS_COMPILE)objcopy
+OBJDUMP		= $(CROSS_COMPILE)objdump
+AWK		= awk
+GENKSYMS	= scripts/genksyms/genksyms
+INSTALLKERNEL  := installkernel
+DEPMOD		= /sbin/depmod
+PERL		= perl
+CHECK		= sparse
+
+CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
+		  -Wbitwise -Wno-return-void $(CF)
+CFLAGS_MODULE   =
+AFLAGS_MODULE   =
+LDFLAGS_MODULE  =
+CFLAGS_KERNEL	=
+AFLAGS_KERNEL	=
+CFLAGS_GCOV	= -fprofile-arcs -ftest-coverage
+
+
+# Use USERINCLUDE when you must reference the UAPI directories only.
+USERINCLUDE    := \
+		-I$(srctree)/arch/$(hdr-arch)/include/uapi \
+		-Iarch/$(hdr-arch)/include/generated/uapi \
+		-I$(srctree)/include/uapi \
+		-Iinclude/generated/uapi \
+                -include $(srctree)/include/linux/kconfig.h
+
+# Use LINUXINCLUDE when you must reference the include/ directory.
+# Needed to be compatible with the O= option
+LINUXINCLUDE    := \
+		-I$(srctree)/arch/$(hdr-arch)/include \
+		-Iarch/$(hdr-arch)/include/generated \
+		$(if $(KBUILD_SRC), -I$(srctree)/include) \
+		-Iinclude \
+		$(USERINCLUDE)
+
+KBUILD_CPPFLAGS := -D__KERNEL__
+
+gccincdir := $(shell $(CC) -print-file-name=include)
+
+KBUILD_CFLAGS   := -Wall -Wstrict-prototypes -Wno-trigraphs \
+		   -fno-strict-aliasing -fno-common \
+		   -Werror-implicit-function-declaration \
+		   -Wno-format-security \
+		   -fno-delete-null-pointer-checks \
+		   -fno-builtin -ffreestanding
+KBUILD_AFLAGS_KERNEL :=
+KBUILD_CFLAGS_KERNEL :=
+KBUILD_AFLAGS   := -D__ASSEMBLY__
+KBUILD_AFLAGS_MODULE  := -DMODULE
+KBUILD_CFLAGS_MODULE  := -DMODULE
+KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
+
+# Read KERNELRELEASE from include/config/kernel.release (if it exists)
+KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
+KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
+
+export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
+export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
+export CPP AR NM STRIP OBJCOPY OBJDUMP
+export MAKE AWK GENKSYMS INSTALLKERNEL PERL UTS_MACHINE
+export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
+
+export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
+export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV
+export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
+export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
+export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
+export KBUILD_ARFLAGS
+
+# When compiling out-of-tree modules, put MODVERDIR in the module
+# tree rather than in the kernel tree. The kernel tree might
+# even be read-only.
+export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
+
+# Files to ignore in find ... statements
+
+RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS \
+		   -o -name .pc -o -name .hg -o -name .git \) -prune -o
+export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
+			 --exclude CVS --exclude .pc --exclude .hg --exclude .git
+
+# ===========================================================================
+# Rules shared between *config targets and build targets
+
+# Basic helpers built in scripts/
+PHONY += scripts_basic
+scripts_basic:
+	$(Q)$(MAKE) $(build)=scripts/basic
+	$(Q)rm -f .tmp_quiet_recordmcount
+
+# To avoid any implicit rule to kick in, define an empty command.
+scripts/basic/%: scripts_basic ;
+
+PHONY += outputmakefile
+# outputmakefile generates a Makefile in the output directory, if using a
+# separate output directory. This allows convenient use of make in the
+# output directory.
+outputmakefile:
+ifneq ($(KBUILD_SRC),)
+	$(Q)ln -fsn $(srctree) source
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
+	    $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
+endif
+
+# Support for using generic headers in asm-generic
+PHONY += asm-generic
+asm-generic:
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
+	            src=asm obj=arch/$(SRCARCH)/include/generated/asm
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
+	            src=uapi/asm obj=arch/$(SRCARCH)/include/generated/uapi/asm
+
+# To make sure we do not include .config for any of the *config targets
+# catch them early, and hand them over to scripts/kconfig/Makefile
+# It is allowed to specify more targets when calling make, including
+# mixing *config targets and build targets.
+# For example 'make oldconfig all'.
+# Detect when mixed targets is specified, and make a second invocation
+# of make so .config is not included in this case either (for *config).
+
+version_h := include/generated/uapi/linux/version.h
+
+no-dot-config-targets := clean mrproper distclean \
+			 cscope gtags TAGS tags help %docs check% coccicheck \
+			 $(version_h) headers_% archheaders archscripts \
+			 kernelversion %src-pkg
+
+config-targets := 0
+mixed-targets  := 0
+dot-config     := 1
+
+ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
+	ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
+		dot-config := 0
+	endif
+endif
+
+ifeq ($(KBUILD_EXTMOD),)
+        ifneq ($(filter config %config,$(MAKECMDGOALS)),)
+                config-targets := 1
+                ifneq ($(filter-out config %config,$(MAKECMDGOALS)),)
+                        mixed-targets := 1
+                endif
+        endif
+endif
+
+ifeq ($(mixed-targets),1)
+# ===========================================================================
+# We're called with mixed targets (*config and build targets).
+# Handle them one by one.
+
+%:: FORCE
+	$(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@
+
+else
+ifeq ($(config-targets),1)
+# ===========================================================================
+# *config targets only - make sure prerequisites are updated, and descend
+# in scripts/kconfig to make the *config target
+
+# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
+# KBUILD_DEFCONFIG may point out an alternative default configuration
+# used for 'make defconfig'arch/$(SRCARCH)/config.mk
+# include $(srctree)/arch/$(SRCARCH)/Makefile
+export KBUILD_DEFCONFIG KBUILD_KCONFIG
+
+config: scripts_basic outputmakefile FORCE
+	$(Q)mkdir -p include/linux include/config
+	$(Q)$(MAKE) $(build)=scripts/kconfig $@
+
+%_config: scripts_basic outputmakefile FORCE
+	$(Q)$(MKCONFIG) -A $(@:_config=)
+	$(Q)mkdir -p include/linux include/config
+	$(Q)$(MAKE) $(build)=scripts/kconfig $@
+	$(Q)rm -f $(objtree)/include/config/autoconf.mk.dep \
+		$(objtree)/include/config/autoconf.mk
+	$(Q)$(MAKE) -f scripts/Makefile.autoconf
+
+%config: scripts_basic outputmakefile FORCE
+	$(Q)mkdir -p include/linux include/config
+	$(Q)$(MAKE) $(build)=scripts/kconfig $@
+
+else
+# ===========================================================================
+# Build targets only - this includes vmlinux, arch specific targets, clean
+# targets and others. In general all targets except *config targets.
+
+SRCARCH = $(ARCH)
+include $(objtree)/include/config.mk
+include $(srctree)/arch/$(SRCARCH)/config.mk
+#include $(objtree)/include/config/autoconf.mk
+
+KBUILD_CFLAGS += $(PLATFORM_CPPFLAGS)
+
+ifeq ($(KBUILD_EXTMOD),)
+# Additional helpers built in scripts/
+# Carefully list dependencies so we do not try to build scripts twice
+# in parallel
+PHONY += scripts
+scripts: scripts_basic include/config/auto.conf include/config/tristate.conf
+	$(Q)$(MAKE) $(build)=$(@)
+
+HAVE_VENDOR_COMMON_LIB = $(if $(wildcard board/$(VENDOR)/common/Makefile),y,n)
+
+# Objects we will link into vmlinux / subdirs we need to visit
+arch-y		:= arch/$(SRCARCH)/
+board-y		:= board/$(VENDOR)/$(BOARD)/
+board-$(HAVE_VENDOR_COMMON_LIB)	+= board/$(VENDOR)/common/
+core-y		:= common/
+disk-y		:= disk/
+drivers-y	:= drivers/
+fs-y		:= fs/
+init-y		:= init/
+libs-y		:= lib/
+net-y		:= net/
+spl-y		:= spl/
+endif # KBUILD_EXTMOD
+
+ifeq ($(dot-config),1)
+# Read in config
+-include include/config/auto.conf
+-include $(objtree)/include/config/autoconf.mk
+# -include $(srctree)/arch/$(SRCARCH)/config.mk
+
+ifeq ($(KBUILD_EXTMOD),)
+# Read in dependencies to all Kconfig* files, make sure to run
+# oldconfig if changes are detected.
+-include include/config/auto.conf.cmd
+
+# To avoid any implicit rule to kick in, define an empty command
+$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
+
+# If .config is newer than include/config/auto.conf, someone tinkered
+# with it and forgot to run make oldconfig.
+# if auto.conf.cmd is missing then we are probably in a cleaned tree so
+# we execute the config step to be sure to catch updated Kconfig files
+include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
+	$(warning check $@ missing $^)
+	$(Q)$(MAKE) -f $(MAKEFILE_NAME) silentoldconfig
+else
+# external modules needs include/generated/autoconf.h and include/config/auto.conf
+# but do not care if they are up-to-date. Use auto.conf to trigger the test
+PHONY += include/config/auto.conf
+
+include/config/auto.conf:
+	$(Q)test -e include/generated/autoconf.h -a -e $@ || (		\
+	echo >&2;							\
+	echo >&2 "  ERROR: Kernel configuration is invalid.";		\
+	echo >&2 "         include/generated/autoconf.h or $@ are missing.";\
+	echo >&2 "         Run 'make oldconfig && make prepare' on kernel src to fix it.";	\
+	echo >&2 ;							\
+	/bin/false)
+
+endif # KBUILD_EXTMOD
+
+else
+# Dummy target needed, because used as prerequisite
+include/config/auto.conf: ;
+endif # $(dot-config)
+
+# The all: target is the default when no target is given on the
+# command line.
+# This allow a user to issue only 'make' to build a kernel including modules
+# Defaults to vmlinux, but the arch makefile usually adds further targets
+all: vmlinux
+
+ifdef CONFIG_SPL
+all: spl/u-boot
+endif
+
+ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+KBUILD_CFLAGS	+= -Os
+else
+KBUILD_CFLAGS	+= -O2
+endif
+
+#include $(srctree)/arch/$(SRCARCH)/Makefile
+
+ifdef CONFIG_READABLE_ASM
+# Disable optimizations that make assembler listings hard to read.
+# reorder blocks reorders the control in the function
+# ipa clone creates specialized cloned functions
+# partial inlining inlines only parts of functions
+KBUILD_CFLAGS += $(call cc-option,-fno-reorder-blocks,) \
+                 $(call cc-option,-fno-ipa-cp-clone,) \
+                 $(call cc-option,-fno-partial-inlining)
+endif
+
+ifneq ($(CONFIG_FRAME_WARN),0)
+KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
+endif
+
+# Force gcc to behave correct even for buggy distributions
+ifndef CONFIG_CC_STACKPROTECTOR
+KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector)
+endif
+
+# This warning generated too much noise in a regular build.
+# Use make W=1 to enable this warning (see scripts/Makefile.build)
+KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
+
+ifdef CONFIG_FRAME_POINTER
+KBUILD_CFLAGS	+= -fno-omit-frame-pointer -fno-optimize-sibling-calls
+else
+# Some targets (ARM with Thumb2, for example), can't be built with frame
+# pointers.  For those, we don't have FUNCTION_TRACER automatically
+# select FRAME_POINTER.  However, FUNCTION_TRACER adds -pg, and this is
+# incompatible with -fomit-frame-pointer with current GCC, so we don't use
+# -fomit-frame-pointer with FUNCTION_TRACER.
+ifndef CONFIG_FUNCTION_TRACER
+KBUILD_CFLAGS	+= -fomit-frame-pointer
+endif
+endif
+
+ifdef CONFIG_DEBUG_INFO
+KBUILD_CFLAGS	+= -g
+KBUILD_AFLAGS	+= -gdwarf-2
+endif
+
+ifdef CONFIG_DEBUG_INFO_REDUCED
+KBUILD_CFLAGS 	+= $(call cc-option, -femit-struct-debug-baseonly)
+endif
+
+ifdef CONFIG_FUNCTION_TRACER
+ifdef CONFIG_HAVE_FENTRY
+CC_USING_FENTRY	:= $(call cc-option, -mfentry -DCC_USING_FENTRY)
+endif
+KBUILD_CFLAGS	+= -pg $(CC_USING_FENTRY)
+KBUILD_AFLAGS	+= $(CC_USING_FENTRY)
+ifdef CONFIG_DYNAMIC_FTRACE
+	ifdef CONFIG_HAVE_C_RECORDMCOUNT
+		BUILD_C_RECORDMCOUNT := y
+		export BUILD_C_RECORDMCOUNT
+	endif
+endif
+endif
+
+# We trigger additional mismatches with less inlining
+ifdef CONFIG_DEBUG_SECTION_MISMATCH
+KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
+endif
+
+# arch Makefile may override CC so keep this after arch Makefile is included
+NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
+CHECKFLAGS     += $(NOSTDINC_FLAGS)
+
+# warn about C99 declaration after statement
+KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
+
+# disable pointer signed / unsigned warnings in gcc 4.0
+KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign)
+
+# disable invalid "can't wrap" optimizations for signed / pointers
+KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
+
+# conserve stack if available
+KBUILD_CFLAGS   += $(call cc-option,-fconserve-stack)
+
+# use the deterministic mode of AR if available
+KBUILD_ARFLAGS := $(call ar-option,D)
+
+# check for 'asm goto'
+ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y)
+	KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
+endif
+
+# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
+KBUILD_CPPFLAGS += $(KCPPFLAGS)
+KBUILD_AFLAGS += $(KAFLAGS)
+KBUILD_CFLAGS += $(KCFLAGS)
+
+# Use --build-id when available.
+LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\
+			      $(call cc-ldoption, -Wl$(comma)--build-id,))
+KBUILD_LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
+LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)
+
+ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
+LDFLAGS_vmlinux	+= $(call ld-option, -X,)
+endif
+
+FINAL_LIBS := $(PLATFORM_LIBS)
+export FINAL_LIBS
+
+# Default kernel image to build when no specific target is given.
+# KBUILD_IMAGE may be overruled on the command line or
+# set in the environment
+# Also any assignments in arch/$(ARCH)/Makefile take precedence over
+# this default value
+export KBUILD_IMAGE ?= vmlinux
+
+#
+# INSTALL_PATH specifies where to place the updated kernel and system map
+# images. Default is /boot, but you can set it to other values
+export	INSTALL_PATH ?= /boot
+
+#
+# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
+# relocations required by build roots.  This is not defined in the
+# makefile but the argument can be passed to make if needed.
+#
+
+MODLIB	= $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
+export MODLIB
+
+#
+#  INSTALL_MOD_STRIP, if defined, will cause modules to be
+#  stripped after they are installed.  If INSTALL_MOD_STRIP is '1', then
+#  the default option --strip-debug will be used.  Otherwise,
+#  INSTALL_MOD_STRIP value will be used as the options to the strip command.
+
+ifdef INSTALL_MOD_STRIP
+ifeq ($(INSTALL_MOD_STRIP),1)
+mod_strip_cmd = $(STRIP) --strip-debug
+else
+mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
+endif # INSTALL_MOD_STRIP=1
+else
+mod_strip_cmd = true
+endif # INSTALL_MOD_STRIP
+export mod_strip_cmd
+
+
+ifdef CONFIG_MODULE_SIG_ALL
+MODSECKEY = ./signing_key.priv
+MODPUBKEY = ./signing_key.x509
+export MODPUBKEY
+mod_sign_cmd = perl $(srctree)/scripts/sign-file $(CONFIG_MODULE_SIG_HASH) $(MODSECKEY) $(MODPUBKEY)
+else
+mod_sign_cmd = true
+endif
+export mod_sign_cmd
+
+
+ifeq ($(KBUILD_EXTMOD),)
+#core-y		+= kernel/ mm/ fs/ ipc/ security/ crypto/ block/
+
+vmlinux-dirs	:= $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
+		     $(arch-y) $(arch-m) $(board-y) $(board-m) \
+		     $(disk-y) $(disk-m) $(fs-y) $(fs-m) \
+		     $(core-y) $(core-m) $(drivers-y) $(drivers-m) \
+		     $(net-y) $(net-m) $(libs-y) $(libs-m)))
+
+vmlinux-alldirs	:= $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \
+		     $(init-n) $(init-) \
+		     $(arch-y) $(arch-m)  $(board-y) $(board-m) \
+		     $(disk-y) $(disk-m) $(fs-y) $(fs-m) \
+		     $(core-n) $(core-) $(drivers-n) $(drivers-) \
+		     $(net-n)  $(net-)  $(libs-n)    $(libs-))))
+
+arch-y		:= $(patsubst %/, %/built-in.o, $(arch-y))
+board-y		:= $(patsubst %/, %/built-in.o, $(board-y))
+core-y		:= $(patsubst %/, %/built-in.o, $(core-y))
+disk-y		:= $(patsubst %/, %/built-in.o, $(disk-y))
+drivers-y	:= $(patsubst %/, %/built-in.o, $(drivers-y))
+fs-y		:= $(patsubst %/, %/built-in.o, $(fs-y))
+init-y		:= $(patsubst %/, %/built-in.o, $(init-y))
+net-y		:= $(patsubst %/, %/built-in.o, $(net-y))
+spl-y		:= $(patsubst %/, %/built-in.o, $(spl-y))
+# libs-y1		:= $(patsubst %/, %/lib.a, $(libs-y))
+# libs-y2		:= $(patsubst %/, %/built-in.o, $(libs-y))
+# libs-y		:= $(libs-y1) $(libs-y2)
+
+libs-y		:= $(patsubst %/, %/built-in.o, $(libs-y))
+
+# Externally visible symbols (used by link-vmlinux.sh)
+export KBUILD_VMLINUX_INIT := $(head-y) $(init-y)
+export KBUILD_VMLINUX_MAIN := $(core-y) $(libs-y) $(drivers-y) $(net-y) \
+			      $(arch-y) $(board-y) $(disk-y) $(fs-y)
+export KBUILD_LDS          := arch/$(SRCARCH)/cpu/u-boot.lds
+export LDFLAGS_vmlinux
+
+vmlinux-deps := $(KBUILD_LDS) $(KBUILD_VMLINUX_INIT) $(KBUILD_VMLINUX_MAIN)
+
+# Final link of vmlinux
+      cmd_link-vmlinux = $(CONFIG_SHELL) $< $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux)
+quiet_cmd_link-vmlinux = LINK    $@
+
+# Include targets which we want to
+# execute if the rest of the kernel build went well.
+vmlinux: scripts/link-vmlinux.sh $(vmlinux-deps) FORCE
+ifdef CONFIG_HEADERS_CHECK
+	$(Q)$(MAKE) -f $(MAKEFILE_NAME) headers_check
+endif
+ifdef CONFIG_SAMPLES
+	$(Q)$(MAKE) $(build)=samples
+endif
+ifdef CONFIG_BUILD_DOCSRC
+	$(Q)$(MAKE) $(build)=Documentation
+endif
+	+$(call if_changed,link-vmlinux)
+
+spl/u-boot:
+	$(Q)echo "SPL not yet supported"
+
+# The actual objects are generated when descending,
+# make sure no implicit rule kicks in
+$(sort $(vmlinux-deps)): $(vmlinux-dirs) ;
+
+# Handle descending into subdirectories listed in $(vmlinux-dirs)
+# Preset locale variables to speed up the build process. Limit locale
+# tweaks to this spot to avoid wrong language settings when running
+# make menuconfig etc.
+# Error messages still appears in the original language
+
+PHONY += $(vmlinux-dirs)
+$(vmlinux-dirs): prepare scripts
+	$(Q)$(MAKE) $(build)=$@
+
+# Store (new) KERNELRELASE string in include/config/kernel.release
+include/config/kernel.release: include/config/auto.conf FORCE
+	$(Q)rm -f $@
+	$(Q)echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" > $@
+
+
+# Things we need to do before we recursively start building the kernel
+# or the modules are listed in "prepare".
+# A multi level approach is used. prepareN is processed before prepareN-1.
+# archprepare is used in arch Makefiles and when processed asm symlink,
+# version.h and scripts_basic is processed / created.
+
+# Listed in dependency order
+PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
+
+# prepare3 is used to check if we are building in a separate output directory,
+# and if so do:
+# 1) Check that make has not been executed in the kernel src $(srctree)
+prepare3: include/config/kernel.release
+ifneq ($(KBUILD_SRC),)
+	@$(kecho) '  Using $(srctree) as source for kernel'
+	$(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
+		echo >&2 "  $(srctree) is not clean, please run 'make mrproper'"; \
+		echo >&2 "  in the '$(srctree)' directory.";\
+		/bin/false; \
+	fi;
+endif
+
+# prepare2 creates a makefile if using a separate output directory
+prepare2: prepare3 outputmakefile asm-generic
+
+prepare1: prepare2 $(version_h) include/generated/utsrelease.h \
+                   include/config/auto.conf
+	$(cmd_crmodverdir)
+
+archprepare: archheaders archscripts prepare1 scripts_basic
+
+prepare0: archprepare FORCE
+	$(Q)$(MAKE) $(build)=.
+
+# All the preparing..
+prepare: prepare0
+
+# Generate some files
+# ---------------------------------------------------------------------------
+
+# KERNELRELEASE can change from a few different places, meaning version.h
+# needs to be updated, so this check is forced on all builds
+
+uts_len := 64
+define filechk_utsrelease.h
+	if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
+	  echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2;    \
+	  exit 1;                                                         \
+	fi;                                                               \
+	(echo \#define UTS_RELEASE \"$(KERNELRELEASE)\";)
+endef
+
+define filechk_version.h
+	(echo \#define LINUX_VERSION_CODE $(shell                         \
+	expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \
+	echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
+endef
+
+$(version_h): $(MAKEFILE_NAME) FORCE
+	$(call filechk,version.h)
+
+include/generated/utsrelease.h: include/config/kernel.release FORCE
+	$(call filechk,utsrelease.h)
+
+PHONY += headerdep
+headerdep:
+	$(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \
+	$(srctree)/scripts/headerdep.pl -I$(srctree)/include
+
+# ---------------------------------------------------------------------------
+
+PHONY += depend dep
+depend dep:
+	@echo '*** Warning: make $@ is unnecessary now.'
+
+# ---------------------------------------------------------------------------
+# Firmware install
+INSTALL_FW_PATH=$(INSTALL_MOD_PATH)/lib/firmware
+export INSTALL_FW_PATH
+
+PHONY += firmware_install
+firmware_install: FORCE
+	@mkdir -p $(objtree)/firmware
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_install
+
+# ---------------------------------------------------------------------------
+# Kernel headers
+
+#Default location for installed headers
+export INSTALL_HDR_PATH = $(objtree)/usr
+
+hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
+
+# If we do an all arch process set dst to asm-$(hdr-arch)
+hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)
+
+PHONY += archheaders
+archheaders:
+
+PHONY += archscripts
+archscripts:
+
+PHONY += __headers
+__headers: $(version_h) scripts_basic asm-generic archheaders archscripts FORCE
+	$(Q)$(MAKE) $(build)=scripts build_unifdef
+
+PHONY += headers_install_all
+headers_install_all:
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh install
+
+PHONY += headers_install
+headers_install: __headers
+	$(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/uapi/asm/Kbuild),, \
+	  $(error Headers not exportable for the $(SRCARCH) architecture))
+	$(Q)$(MAKE) $(hdr-inst)=include/uapi
+	$(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst)
+
+PHONY += headers_check_all
+headers_check_all: headers_install_all
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh check
+
+PHONY += headers_check
+headers_check: headers_install
+	$(Q)$(MAKE) $(hdr-inst)=include/uapi HDRCHECK=1
+	$(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst) HDRCHECK=1
+
+# ---------------------------------------------------------------------------
+# Modules
+
+ifdef CONFIG_MODULES
+
+# By default, build modules as well
+
+all: modules
+
+#	Build modules
+#
+#	A module can be listed more than once in obj-m resulting in
+#	duplicate lines in modules.order files.  Those are removed
+#	using awk while concatenating to the final file.
+
+PHONY += modules
+modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
+	$(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
+	@$(kecho) '  Building modules, stage 2.';
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild
+
+modules.builtin: $(vmlinux-dirs:%=%/modules.builtin)
+	$(Q)$(AWK) '!x[$$0]++' $^ > $(objtree)/modules.builtin
+
+%/modules.builtin: include/config/auto.conf
+	$(Q)$(MAKE) $(modbuiltin)=$*
+
+
+# Target to prepare building external modules
+PHONY += modules_prepare
+modules_prepare: prepare scripts
+
+# Target to install modules
+PHONY += modules_install
+modules_install: _modinst_ _modinst_post
+
+PHONY += _modinst_
+_modinst_:
+	@rm -rf $(MODLIB)/kernel
+	@rm -f $(MODLIB)/source
+	@mkdir -p $(MODLIB)/kernel
+	@ln -s $(srctree) $(MODLIB)/source
+	@if [ ! $(objtree) -ef  $(MODLIB)/build ]; then \
+		rm -f $(MODLIB)/build ; \
+		ln -s $(objtree) $(MODLIB)/build ; \
+	fi
+	@cp -f $(objtree)/modules.order $(MODLIB)/
+	@cp -f $(objtree)/modules.builtin $(MODLIB)/
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
+
+# This depmod is only for convenience to give the initial
+# boot a modules.dep even before / is mounted read-write.  However the
+# boot script depmod is the master version.
+PHONY += _modinst_post
+_modinst_post: _modinst_
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modinst
+	$(call cmd,depmod)
+
+ifeq ($(CONFIG_MODULE_SIG), y)
+PHONY += modules_sign
+modules_sign:
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modsign
+endif
+
+else # CONFIG_MODULES
+
+# Modules not configured
+# ---------------------------------------------------------------------------
+
+modules modules_install: FORCE
+	@echo >&2
+	@echo >&2 "The present kernel configuration has modules disabled."
+	@echo >&2 "Type 'make config' and enable loadable module support."
+	@echo >&2 "Then build a kernel with module support enabled."
+	@echo >&2
+	@exit 1
+
+endif # CONFIG_MODULES
+
+###
+# Cleaning is done on three levels.
+# make clean     Delete most generated files
+#                Leave enough to build external modules
+# make mrproper  Delete the current configuration, and all generated files
+# make distclean Remove editor backup files, patch leftover files and the like
+
+# Directories & files removed with 'make clean'
+CLEAN_DIRS  += $(MODVERDIR)
+
+# Directories & files removed with 'make mrproper'
+MRPROPER_DIRS  += include/config usr/include include/generated          \
+                  arch/*/include/generated
+MRPROPER_FILES += .config .config.old .version .old_version $(version_h) \
+		  Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
+		  signing_key.priv signing_key.x509 x509.genkey		\
+		  extra_certificates signing_key.x509.keyid		\
+		  signing_key.x509.signer
+
+# clean - Delete most, but leave enough to build external modules
+#
+clean: rm-dirs  := $(CLEAN_DIRS)
+clean: rm-files := $(CLEAN_FILES)
+clean-dirs      := $(addprefix _clean_, . $(vmlinux-alldirs) doc)
+
+PHONY += $(clean-dirs) clean archclean vmlinuxclean
+$(clean-dirs):
+	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
+
+vmlinuxclean:
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean
+
+clean: archclean vmlinuxclean
+
+# mrproper - Delete all generated files, including .config
+#
+mrproper: rm-dirs  := $(wildcard $(MRPROPER_DIRS))
+mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
+mrproper-dirs      := $(addprefix _mrproper_,Documentation/DocBook scripts)
+
+PHONY += $(mrproper-dirs) mrproper archmrproper
+$(mrproper-dirs):
+	$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
+
+mrproper: clean archmrproper $(mrproper-dirs)
+	$(call cmd,rmdirs)
+	$(call cmd,rmfiles)
+
+# distclean
+#
+PHONY += distclean
+
+distclean: mrproper
+	@find $(srctree) $(RCS_FIND_IGNORE) \
+		\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
+		-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
+		-o -name '.*.rej' \
+		-o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
+		-type f -print | xargs rm -f
+
+
+# Packaging of the kernel to various formats
+# ---------------------------------------------------------------------------
+# rpm target kept for backward compatibility
+package-dir	:= $(srctree)/scripts/package
+
+%src-pkg: FORCE
+	$(Q)$(MAKE) $(build)=$(package-dir) $@
+%pkg: include/config/kernel.release FORCE
+	$(Q)$(MAKE) $(build)=$(package-dir) $@
+rpm: include/config/kernel.release FORCE
+	$(Q)$(MAKE) $(build)=$(package-dir) $@
+
+
+# Brief documentation of the typical targets used
+# ---------------------------------------------------------------------------
+
+boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig)
+boards := $(notdir $(boards))
+board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig))
+board-dirs := $(sort $(notdir $(board-dirs:/=)))
+
+help:
+	@echo  'Cleaning targets:'
+	@echo  '  clean		  - Remove most generated files but keep the config and'
+	@echo  '                    enough build support to build external modules'
+	@echo  '  mrproper	  - Remove all generated files + config + various backup files'
+	@echo  '  distclean	  - mrproper + remove editor backup and patch files'
+	@echo  ''
+	@echo  'Configuration targets:'
+	@$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
+	@echo  ''
+	@echo  'Other generic targets:'
+	@echo  '  all		  - Build all targets marked with [*]'
+	@echo  '* vmlinux	  - Build the bare kernel'
+	@echo  '* modules	  - Build all modules'
+	@echo  '  modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
+	@echo  '  firmware_install- Install all firmware to INSTALL_FW_PATH'
+	@echo  '                    (default: $$(INSTALL_MOD_PATH)/lib/firmware)'
+	@echo  '  dir/            - Build all files in dir and below'
+	@echo  '  dir/file.[oisS] - Build specified target only'
+	@echo  '  dir/file.lst    - Build specified mixed source/assembly target only'
+	@echo  '                    (requires a recent binutils and recent build (System.map))'
+	@echo  '  dir/file.ko     - Build module including final link'
+	@echo  '  modules_prepare - Set up for building external modules'
+	@echo  '  tags/TAGS	  - Generate tags file for editors'
+	@echo  '  cscope	  - Generate cscope index'
+	@echo  '  gtags           - Generate GNU GLOBAL index'
+	@echo  '  kernelrelease	  - Output the release version string'
+	@echo  '  kernelversion	  - Output the version stored in Makefile'
+	@echo  '  headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
+	 echo  '                    (default: $(INSTALL_HDR_PATH))'; \
+	 echo  ''
+	@echo  'Static analysers'
+	@echo  '  checkstack      - Generate a list of stack hogs'
+	@echo  '  namespacecheck  - Name space analysis on compiled kernel'
+	@echo  '  versioncheck    - Sanity check on version.h usage'
+	@echo  '  includecheck    - Check for duplicate included header files'
+	@echo  '  export_report   - List the usages of all exported symbols'
+	@echo  '  headers_check   - Sanity check on exported headers'
+	@echo  '  headerdep       - Detect inclusion cycles in headers'
+	@$(MAKE) -f $(srctree)/scripts/Makefile.help checker-help
+	@echo  ''
+	@echo  'Kernel packaging:'
+	@$(MAKE) $(build)=$(package-dir) help
+	@echo  ''
+	@echo  'Documentation targets:'
+	@$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp
+	@echo  ''
+	@echo  'Architecture specific targets ($(SRCARCH)):'
+	@$(if $(archhelp),$(archhelp),\
+		echo '  No architecture specific help defined for $(SRCARCH)')
+	@echo  ''
+	@$(if $(boards), \
+		$(foreach b, $(boards), \
+		printf "  %-24s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \
+		echo '')
+	@$(if $(board-dirs), \
+		$(foreach b, $(board-dirs), \
+		printf "  %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \
+		printf "  %-16s - Show all of the above\\n" help-boards; \
+		echo '')
+
+	@echo  '  make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
+	@echo  '  make V=2   [targets] 2 => give reason for rebuild of target'
+	@echo  '  make O=dir [targets] Locate all output files in "dir", including .config'
+	@echo  '  make C=1   [targets] Check all c source with $$CHECK (sparse by default)'
+	@echo  '  make C=2   [targets] Force check of all c source with $$CHECK'
+	@echo  '  make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
+	@echo  '  make W=n   [targets] Enable extra gcc checks, n=1,2,3 where'
+	@echo  '		1: warnings which may be relevant and do not occur too often'
+	@echo  '		2: warnings which occur quite often but may still be relevant'
+	@echo  '		3: more obscure warnings, can most likely be ignored'
+	@echo  '		Multiple levels can be combined with W=12 or W=123'
+	@echo  ''
+	@echo  'Execute "make" or "make all" to build all targets marked with [*] '
+	@echo  'For further info see the ./README file'
+
+
+help-board-dirs := $(addprefix help-,$(board-dirs))
+
+help-boards: $(help-board-dirs)
+
+boards-per-dir = $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig))
+
+$(help-board-dirs): help-%:
+	@echo  'Architecture specific targets ($(SRCARCH) $*):'
+	@$(if $(boards-per-dir), \
+		$(foreach b, $(boards-per-dir), \
+		printf "  %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \
+		echo '')
+
+
+# Documentation targets
+# ---------------------------------------------------------------------------
+%docs: scripts_basic FORCE
+	$(Q)$(MAKE) $(build)=scripts build_docproc
+	$(Q)$(MAKE) $(build)=Documentation/DocBook $@
+
+else # KBUILD_EXTMOD
+
+###
+# External module support.
+# When building external modules the kernel used as basis is considered
+# read-only, and no consistency checks are made and the make
+# system is not used on the basis kernel. If updates are required
+# in the basis kernel ordinary make commands (without M=...) must
+# be used.
+#
+# The following are the only valid targets when building external
+# modules.
+# make M=dir clean     Delete all automatically generated files
+# make M=dir modules   Make all modules in specified dir
+# make M=dir	       Same as 'make M=dir modules'
+# make M=dir modules_install
+#                      Install the modules built in the module directory
+#                      Assumes install directory is already created
+
+# We are always building modules
+KBUILD_MODULES := 1
+PHONY += crmodverdir
+crmodverdir:
+	$(cmd_crmodverdir)
+
+PHONY += $(objtree)/Module.symvers
+$(objtree)/Module.symvers:
+	@test -e $(objtree)/Module.symvers || ( \
+	echo; \
+	echo "  WARNING: Symbol version dump $(objtree)/Module.symvers"; \
+	echo "           is missing; modules will have no dependencies and modversions."; \
+	echo )
+
+module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
+PHONY += $(module-dirs) modules
+$(module-dirs): crmodverdir $(objtree)/Module.symvers
+	$(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
+
+modules: $(module-dirs)
+	@$(kecho) '  Building modules, stage 2.';
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+
+PHONY += modules_install
+modules_install: _emodinst_ _emodinst_post
+
+install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
+PHONY += _emodinst_
+_emodinst_:
+	$(Q)mkdir -p $(MODLIB)/$(install-dir)
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
+
+PHONY += _emodinst_post
+_emodinst_post: _emodinst_
+	$(call cmd,depmod)
+
+clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))
+
+PHONY += $(clean-dirs) clean
+$(clean-dirs):
+	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
+
+clean:	rm-dirs := $(MODVERDIR)
+clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
+
+help:
+	@echo  '  Building external modules.'
+	@echo  '  Syntax: make -C path/to/kernel/src M=$$PWD target'
+	@echo  ''
+	@echo  '  modules         - default target, build the module(s)'
+	@echo  '  modules_install - install the module'
+	@echo  '  clean           - remove generated files in module directory only'
+	@echo  ''
+
+# Dummies...
+PHONY += prepare scripts
+prepare: ;
+scripts: ;
+endif # KBUILD_EXTMOD
+
+clean: $(clean-dirs)
+	$(call cmd,rmdirs)
+	$(call cmd,rmfiles)
+	@find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
+		\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
+		-o -name '*.ko.*' \
+		-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
+		-o -name '*.symtypes' -o -name 'modules.order' \
+		-o -name modules.builtin -o -name '.tmp_*.o.*' \
+		-o -name '*.gcno' \) -type f -print | xargs rm -f
+
+# Generate tags for editors
+# ---------------------------------------------------------------------------
+quiet_cmd_tags = GEN     $@
+      cmd_tags = $(CONFIG_SHELL) $(srctree)/scripts/tags.sh $@
+
+tags TAGS cscope gtags: FORCE
+	$(call cmd,tags)
+
+# Scripts to check various things for consistency
+# ---------------------------------------------------------------------------
+
+PHONY += includecheck versioncheck coccicheck namespacecheck export_report
+
+includecheck:
+	find $(srctree)/* $(RCS_FIND_IGNORE) \
+		-name '*.[hcS]' -type f -print | sort \
+		| xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl
+
+versioncheck:
+	find $(srctree)/* $(RCS_FIND_IGNORE) \
+		-name '*.[hcS]' -type f -print | sort \
+		| xargs $(PERL) -w $(srctree)/scripts/checkversion.pl
+
+coccicheck:
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
+
+namespacecheck:
+	$(PERL) $(srctree)/scripts/namespace.pl
+
+export_report:
+	$(PERL) $(srctree)/scripts/export_report.pl
+
+endif #ifeq ($(config-targets),1)
+endif #ifeq ($(mixed-targets),1)
+
+PHONY += checkstack kernelrelease kernelversion
+
+# UML needs a little special treatment here.  It wants to use the host
+# toolchain, so needs $(SUBARCH) passed to checkstack.pl.  Everyone
+# else wants $(ARCH), including people doing cross-builds, which means
+# that $(SUBARCH) doesn't work here.
+ifeq ($(ARCH), um)
+CHECKSTACK_ARCH := $(SUBARCH)
+else
+CHECKSTACK_ARCH := $(ARCH)
+endif
+checkstack:
+	$(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
+	$(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
+
+kernelrelease:
+	@echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
+
+kernelversion:
+	@echo $(KERNELVERSION)
+
+# Clear a bunch of variables before executing the submake
+tools/: FORCE
+	$(Q)mkdir -p $(objtree)/tools
+	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS= O=$(objtree) subdir=tools -C $(src)/tools/
+
+tools/%: FORCE
+	$(Q)mkdir -p $(objtree)/tools
+	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS= O=$(objtree) subdir=tools -C $(src)/tools/ $*
+
+# Single targets
+# ---------------------------------------------------------------------------
+# Single targets are compatible with:
+# - build with mixed source and output
+# - build with separate output dir 'make O=...'
+# - external modules
+#
+#  target-dir => where to store outputfile
+#  build-dir  => directory in kernel source tree to use
+
+ifeq ($(KBUILD_EXTMOD),)
+        build-dir  = $(patsubst %/,%,$(dir $@))
+        target-dir = $(dir $@)
+else
+        zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
+        build-dir  = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
+        target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
+endif
+
+%.s: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.i: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.o: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.lst: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.s: %.S prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.o: %.S prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.symtypes: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+
+# Modules
+/: prepare scripts FORCE
+	$(cmd_crmodverdir)
+	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+	$(build)=$(build-dir)
+%/: prepare scripts FORCE
+	$(cmd_crmodverdir)
+	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+	$(build)=$(build-dir)
+%.ko: prepare scripts FORCE
+	$(cmd_crmodverdir)
+	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1)   \
+	$(build)=$(build-dir) $(@:.ko=.o)
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+
+# FIXME Should go into a make.lib or something
+# ===========================================================================
+
+quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN   $(wildcard $(rm-dirs)))
+      cmd_rmdirs = rm -rf $(rm-dirs)
+
+quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN   $(wildcard $(rm-files)))
+      cmd_rmfiles = rm -f $(rm-files)
+
+# Run depmod only if we have System.map and depmod is executable
+quiet_cmd_depmod = DEPMOD  $(KERNELRELEASE)
+      cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
+                   $(KERNELRELEASE)
+
+# Create temporary dir for module support files
+# clean it up only when building all modules
+cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \
+                  $(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*)
+
+# read all saved command lines
+
+targets := $(wildcard $(sort $(targets)))
+cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
+
+ifneq ($(cmd_files),)
+  $(cmd_files): ;	# Do not try to update included dependency files
+  include $(cmd_files)
+endif
+
+# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
+# Usage:
+# $(Q)$(MAKE) $(clean)=dir
+clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
+
+endif	# skip-makefile
+
+PHONY += FORCE
+FORCE:
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable so we can use it in if_changed and friends.
+.PHONY: $(PHONY)
include/linux/kconfig.h new file +46 -0

46 lines not on this page · raw message

scripts/Kbuild.include new file +278 -0

278 lines not on this page · raw message

scripts/Makefile new file +42 -0

42 lines not on this page · raw message

scripts/Makefile.asm-generic new file +24 -0
new file mode 100644
index 0000000..d17e0ea
@@ -0,0 +1,24 @@
+# include/asm-generic contains a lot of files that are used
+# verbatim by several architectures.
+#
+# This Makefile reads the file arch/$(SRCARCH)/include/asm/Kbuild
+# and for each file listed in this file with generic-y creates
+# a small wrapper file in $(obj) (arch/$(SRCARCH)/include/generated/asm)
+
+kbuild-file := $(srctree)/arch/$(SRCARCH)/include/$(src)/Kbuild
+-include $(kbuild-file)
+
+include scripts/Kbuild.include
+
+# Create output directory if not already present
+_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))
+
+quiet_cmd_wrap = WRAP    $@
+cmd_wrap = echo "\#include <asm-generic/$*.h>" >$@
+
+all: $(patsubst %, $(obj)/%, $(generic-y))
+	@:
+
+$(obj)/%.h:
+	$(call cmd,wrap)
+
scripts/Makefile.autoconf new file +68 -0

68 lines not on this page · raw message

scripts/Makefile.build new file +478 -0

478 lines not on this page · raw message

scripts/Makefile.clean new file +104 -0

104 lines not on this page · raw message

scripts/Makefile.host new file +170 -0

170 lines not on this page · raw message

scripts/Makefile.lib new file +378 -0

294 lines not on this page · raw message

scripts/Makefile.modpost new file +148 -0

148 lines not on this page · raw message

scripts/basic/.gitignore new file +1 -0
new file mode 100644
index 0000000..a776371

Lines of this file are not shown. View the raw message.

scripts/basic/Makefile new file +15 -0
new file mode 100644
index 0000000..4fcef87

Lines of this file are not shown. View the raw message.

scripts/basic/fixdep.c new file +433 -0

433 lines not on this page · raw message

scripts/gcc-goto.sh new file +21 -0
new file mode 100644
index 0000000..a2af2e8

Lines of this file are not shown. View the raw message.

scripts/kconfig/.gitignore new file +22 -0
new file mode 100644
index 0000000..be603c4

Lines of this file are not shown. View the raw message.

scripts/kconfig/Makefile new file +325 -0

325 lines not on this page · raw message

scripts/kconfig/POTFILES.in new file +12 -0
new file mode 100644
index 0000000..9674573

Lines of this file are not shown. View the raw message.

scripts/kconfig/check.sh new file +14 -0
new file mode 100755
index 0000000..854d9c7

Lines of this file are not shown. View the raw message.

scripts/kconfig/conf.c new file +701 -0

701 lines not on this page · raw message

scripts/kconfig/confdata.c new file +1164 -0

1,164 lines not on this page · raw message

scripts/kconfig/expr.c new file +1168 -0

1,168 lines not on this page · raw message

scripts/kconfig/expr.h new file +235 -0

235 lines not on this page · raw message

scripts/kconfig/gconf.c new file +1542 -0

1,542 lines not on this page · raw message

scripts/kconfig/gconf.glade new file +661 -0

661 lines not on this page · raw message

scripts/kconfig/images.c new file +326 -0

326 lines not on this page · raw message

scripts/kconfig/kxgettext.c new file +235 -0

235 lines not on this page · raw message

scripts/kconfig/list.h new file +91 -0

91 lines not on this page · raw message

scripts/kconfig/lkc.h new file +198 -0

198 lines not on this page · raw message

scripts/kconfig/lkc_proto.h new file +56 -0

56 lines not on this page · raw message

scripts/kconfig/lxdialog/.gitignore new file +4 -0
new file mode 100644
index 0000000..90b08ff

Lines of this file are not shown. View the raw message.

scripts/kconfig/lxdialog/BIG.FAT.WARNING new file +4 -0
new file mode 100644
index 0000000..a8999d8

Lines of this file are not shown. View the raw message.

scripts/kconfig/lxdialog/check-lxdialog.sh new file +85 -0

85 lines not on this page · raw message

scripts/kconfig/lxdialog/checklist.c new file +332 -0

332 lines not on this page · raw message

scripts/kconfig/lxdialog/dialog.h new file +236 -0

236 lines not on this page · raw message

scripts/kconfig/lxdialog/inputbox.c new file +301 -0

301 lines not on this page · raw message

scripts/kconfig/lxdialog/menubox.c new file +436 -0

436 lines not on this page · raw message

scripts/kconfig/lxdialog/textbox.c new file +408 -0

408 lines not on this page · raw message

scripts/kconfig/lxdialog/util.c new file +664 -0

664 lines not on this page · raw message

scripts/kconfig/lxdialog/yesno.c new file +114 -0

114 lines not on this page · raw message

scripts/kconfig/mconf.c new file +963 -0

963 lines not on this page · raw message

scripts/kconfig/menu.c new file +644 -0

644 lines not on this page · raw message

scripts/kconfig/merge_config.sh new file +142 -0

142 lines not on this page · raw message

scripts/kconfig/nconf.c new file +1558 -0

1,558 lines not on this page · raw message

scripts/kconfig/nconf.gui.c new file +654 -0

654 lines not on this page · raw message

scripts/kconfig/nconf.h new file +96 -0

96 lines not on this page · raw message

scripts/kconfig/qconf.cc new file +1790 -0

1,790 lines not on this page · raw message

scripts/kconfig/qconf.h new file +337 -0

337 lines not on this page · raw message

scripts/kconfig/streamline_config.pl new file +634 -0

634 lines not on this page · raw message

scripts/kconfig/symbol.c new file +1310 -0

1,310 lines not on this page · raw message

scripts/kconfig/util.c new file +159 -0

159 lines not on this page · raw message

scripts/kconfig/zconf.gperf new file +47 -0

47 lines not on this page · raw message

scripts/kconfig/zconf.hash.c_shipped new file +286 -0

286 lines not on this page · raw message

scripts/kconfig/zconf.l new file +364 -0

364 lines not on this page · raw message

scripts/kconfig/zconf.lex.c_shipped new file +2420 -0

2,420 lines not on this page · raw message

scripts/kconfig/zconf.tab.c_shipped new file +2504 -0

2,504 lines not on this page · raw message

scripts/kconfig/zconf.y new file +740 -0

740 lines not on this page · raw message

scripts/link-vmlinux.sh new file +226 -0

226 lines not on this page · raw message

scripts/mkcompile_h new file +100 -0

100 lines not on this page · raw message

scripts/mksysmap new file +45 -0

45 lines not on this page · raw message

scripts/mod/.gitignore new file +5 -0
new file mode 100644
index 0000000..33bae0d

Lines of this file are not shown. View the raw message.

scripts/mod/Makefile new file +51 -0

51 lines not on this page · raw message

scripts/mod/devicetable-offsets.c new file +178 -0

178 lines not on this page · raw message

scripts/mod/empty.c new file +1 -0
new file mode 100644
index 0000000..49839cc

Lines of this file are not shown. View the raw message.

scripts/mod/file2alias.c new file +1236 -0

1,236 lines not on this page · raw message

scripts/mod/mk_elfconfig.c new file +57 -0

57 lines not on this page · raw message

scripts/mod/modpost.c new file +2222 -0

2,222 lines not on this page · raw message

scripts/mod/modpost.h new file +187 -0

187 lines not on this page · raw message

scripts/mod/sumversion.c new file +519 -0

519 lines not on this page · raw message

scripts/setlocalversion new file +176 -0

176 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
1.8.2.1

Part of the diff is not shown here. View the raw message.

#6 lore raw

RFC PATCH 4/7 Add Kconfig scripts and related material

Hello, Simon.

I am trying to identify from which kernel
you took Kbuild files.

In commit log, you are clearly saying,
"This is taken from the Linux kernel 3.8-rc7".

So, I tried to get the one.

What I did is just as follows:

$ git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
$ git checkout v3.8-rc7

I am not sure this is a correct way, but I found more diffs than just the adjustment for U-Boot.

For example, script/kconfig/Makefile you added includes the following lines.

kvmconfig:

        $(Q)$(CONFIG_SHELL) $(srctree)/scripts/config -e KVMTOOL_TEST_ENABLE
        $(Q)yes "" | make oldconfig > /dev/null
        @echo 'Kernel configuration modified to run as KVM guest.'

But the Linux kernel, I think to be v3.8-rc7, do not include them. The kvmconfig is missing from Linux Kernel master branch too.

Maybe I am seeing different source tree,
so, could you show me how to get Linux Kernel sources you started from?

Best Regards,
Masahiro Yamada

#7 lore raw

RFC PATCH 4/7 Add Kconfig scripts and related material

Hi,

Quoted 30 lines · Masahiro Yamada

Hello, Simon.

I am trying to identify from which kernel
you took Kbuild files.

In commit log, you are clearly saying,
"This is taken from the Linux kernel 3.8-rc7".

So, I tried to get the one.

What I did is just as follows:

$ git clone git://
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
$ git checkout v3.8-rc7

I am not sure this is a correct way, but I found more diffs than just the adjustment for U-Boot.

For example, script/kconfig/Makefile you added includes the following lines.

kvmconfig:

        $(Q)$(CONFIG_SHELL) $(srctree)/scripts/config -e

KVMTOOL_TEST_ENABLE
$(Q)yes "" | make oldconfig > /dev/null
@echo 'Kernel configuration modified to run as KVM guest.'

Quoted 6 lines

But the Linux kernel, I think to be v3.8-rc7, do not include them. The kvmconfig is missing from Linux Kernel master branch too.

Maybe I am seeing different source tree,
so, could you show me how to get Linux Kernel sources you started from?

I took it from a checkout of linux-next unfortunately (trying to be bleeding edge) so this might be gone now. The code you mention was added in this commit:

3b08ed0 (HEAD) config: Add 'make kvmconfig'

However it seems to have been dumped later. When I return to this I will pick up an official release.

I can push my linux-next somewhere if that would help.

Regards,
Simon

Quoted 6 lines

Best Regards,
Masahiro Yamada

#8 lore raw

RFC PATCH 4/7 Add Kconfig scripts and related material

Hello, Simon.

Quoted 1 line

I can push my linux-next somewhere if that would help.

It is not necessary if you are going to pick up an official release.

I have two more requests when you post version 2.

You added Makefile.kbuild at commit
"Add Kconfig scripts and related material".
It seems to already include the modification for U-Boot.

So, my first request is that this commit should just import scripts as they are in Linux Kernel (plus renaming from Makefile to Makefile.kbuild)

All modification you make for U-Boot should be pushed into the next commit "Adjust Kconfig scripts for use by U-Boot".

I think this would be helpful for reviewers to track which lines are changed.

The seconde request is subject of personal preference but I like the white spaces to be kept untouched when importing files from another project.

Although I was not sure they were corrected by you,
I noticed some white space errors diffs when
comparing your patches with Linux Kernel makefiles.
The reason is, as you mentioned in commit log, to minimise conflicts with future Kbuild updates.

Best regards,
Masahiro Yamada

#9 lore raw

RFC PATCH 4/7 Add Kconfig scripts and related material

On Tue, May 28, 2013 at 10:31:59AM +0900, Masahiro Yamada wrote:

[snip]

Quoted 15 lines

So, my first request is that this commit should just import scripts as they are in Linux Kernel (plus renaming from Makefile to Makefile.kbuild)

All modification you make for U-Boot should be pushed into the next commit "Adjust Kconfig scripts for use by U-Boot".

I think this would be helpful for reviewers to track which lines are changed.

The seconde request is subject of personal preference but I like the white spaces to be kept untouched when importing files from another project.

Quoted 5 lines

Although I was not sure they were corrected by you,
I noticed some white space errors diffs when
comparing your patches with Linux Kernel makefiles.
The reason is, as you mentioned in commit log, to minimise conflicts with future Kbuild updates.

Agreed on both points.

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130528/54f62e80/attachment.pgp>
#10 lore raw

RFC PATCH 5/7 Adjust Kconfig scripts for use by U-Boot

In reply to Simon Glass

This is an intial stab at changing Kconfig for U-Boot. So far it is missing many things, notably SPL support and binary output. Also the output file is vmlinux instead of u-boot.

Linux modules are not supported, but it is quite possible that some enterprising soul will want to implement modules in U-Boot. For that reason and to minimise conflicts with future Kbuild updates, modules support is disabled rather than removed.

---
 Makefile.kbuild          | 37 +++++++++++++++++++++++++++++++------
 scripts/Makefile         |  7 +------
 scripts/Makefile.build   |  1 +
 scripts/Makefile.lib     | 10 ++++++----
 scripts/kconfig/Makefile | 15 +++++++++++++--
 scripts/link-vmlinux.sh  | 13 +++++++------
 6 files changed, 59 insertions(+), 24 deletions(-)
Makefile.kbuild +31 -6
index 2547cca..dc241d4 100644
@@ -2,7 +2,12 @@ VERSION = 2013
 PATCHLEVEL = 04
 SUBLEVEL =
 EXTRAVERSION =
-NAME = Unicycling Gorilla
+NAME = Uncular Umbrella
+ifneq "$(SUBLEVEL)" ""
+U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
+else
+U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
+endif
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@@ -172,6 +177,9 @@ export SRCTREE TOPDIR OBJTREE
 # Export U-Boot variables
 export BOARD CPU SOC VENDOR
 
+TIMESTAMP_FILE = $(objtree)/include/generated/timestamp_autogenerated.h
+VERSION_FILE = $(objtree)/include/generated/version_autogenerated.h
+
 # SUBARCH tells the usermode build what the underlying arch is.  That is set
 # first, and if a usermode build is happening, the "ARCH=um" on the command
 # line overrides the setting of ARCH below.  If a native build is happening,
@@ -807,9 +815,6 @@ fs-y		:= $(patsubst %/, %/built-in.o, $(fs-y))
 init-y		:= $(patsubst %/, %/built-in.o, $(init-y))
 net-y		:= $(patsubst %/, %/built-in.o, $(net-y))
 spl-y		:= $(patsubst %/, %/built-in.o, $(spl-y))
-# libs-y1		:= $(patsubst %/, %/lib.a, $(libs-y))
-# libs-y2		:= $(patsubst %/, %/built-in.o, $(libs-y))
-# libs-y		:= $(libs-y1) $(libs-y2)
 
 libs-y		:= $(patsubst %/, %/built-in.o, $(libs-y))
 
@@ -875,7 +880,7 @@ PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
 # prepare3 is used to check if we are building in a separate output directory,
 # and if so do:
 # 1) Check that make has not been executed in the kernel src $(srctree)
-prepare3: include/config/kernel.release
+prepare3: include/config/kernel.release $(TIMESTAMP_FILE) $(VERSION_FILE)
 ifneq ($(KBUILD_SRC),)
 	@$(kecho) '  Using $(srctree) as source for kernel'
 	$(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
@@ -906,6 +911,26 @@ prepare: prepare0
 # KERNELRELEASE can change from a few different places, meaning version.h
 # needs to be updated, so this check is forced on all builds
 
+$(VERSION_FILE):
+		@mkdir -p $(dir $(VERSION_FILE))
+		@( localvers='$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ; \
+		   printf '#define PLAIN_VERSION "%s%s"\n' \
+			"$(U_BOOT_VERSION)" "$${localvers}" ; \
+		   printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' \
+			"$(U_BOOT_VERSION)" "$${localvers}" ; \
+		) > [email protected]
+		@( printf '#define CC_VERSION_STRING "%s"\n' \
+		 '$(shell $(CC) --version | head -n 1)' )>>  [email protected]
+		@( printf '#define LD_VERSION_STRING "%s"\n' \
+		 '$(shell $(LD) -v | head -n 1)' )>>  [email protected]
+		@cmp -s $@ [email protected] && rm -f [email protected] || mv -f [email protected] $@
+
+$(TIMESTAMP_FILE):
+		@mkdir -p $(dir $(TIMESTAMP_FILE))
+		@LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"' > [email protected]
+		@LC_ALL=C date +'#define U_BOOT_TIME "%T"' >> [email protected]
+		@cmp -s $@ [email protected] && rm -f [email protected] || mv -f [email protected] $@
+
 uts_len := 64
 define filechk_utsrelease.h
 	if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
@@ -1107,7 +1132,7 @@ clean: archclean vmlinuxclean
 #
 mrproper: rm-dirs  := $(wildcard $(MRPROPER_DIRS))
 mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
-mrproper-dirs      := $(addprefix _mrproper_,Documentation/DocBook scripts)
+mrproper-dirs      := $(addprefix _mrproper_,scripts)
 
 PHONY += $(mrproper-dirs) mrproper archmrproper
 $(mrproper-dirs):
scripts/Makefile +1 -6
index 01e7adb..aedf135 100644
@@ -33,10 +33,5 @@ build_unifdef: scripts/unifdef FORCE
 build_docproc: scripts/docproc FORCE
 	@:
 
-subdir-$(CONFIG_MODVERSIONS) += genksyms
-subdir-y                     += mod
-subdir-$(CONFIG_SECURITY_SELINUX) += selinux
-subdir-$(CONFIG_DTC)         += dtc
-
 # Let clean descend into subdirs
-subdir-	+= basic kconfig package selinux
+subdir-	+= basic kconfig
scripts/Makefile.build +1 -0
index 0e801c3..82f099e 100644
@@ -32,6 +32,7 @@ subdir-ccflags-y :=
 
 # Read auto.conf if it exists, otherwise ignore
 -include include/config/auto.conf
+-include $(objtree)/include/config/autoconf.mk
 
 include scripts/Kbuild.include
 
scripts/Makefile.lib +6 -4
index 07125e6..8d960ad 100644
@@ -27,7 +27,7 @@ lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m)))
 # ---------------------------------------------------------------------------
 # o if we encounter foo/ in $(obj-y), replace it by foo/built-in.o
 #   and add the directory to the list of dirs to descend into: $(subdir-y)
-# o if we encounter foo/ in $(obj-m), remove it from $(obj-m) 
+# o if we encounter foo/ in $(obj-m), remove it from $(obj-m)
 #   and add the directory to the list of dirs to descend into: $(subdir-m)
 
 # Determine modorder.
@@ -144,14 +144,16 @@ __a_flags	=                          $(call flags,_a_flags)
 __cpp_flags     =                          $(call flags,_cpp_flags)
 endif
 
-c_flags        = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE)     \
+_nostdinc_flags = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(NOSTDINC_FLAGS))
+
+c_flags        = -Wp,-MD,$(depfile) $(_nostdinc_flags) $(LINUXINCLUDE)     \
 		 $(__c_flags) $(modkern_cflags)                           \
 		 -D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags)
 
-a_flags        = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE)     \
+a_flags        = -Wp,-MD,$(depfile) $(_nostdinc_flags) $(LINUXINCLUDE)     \
 		 $(__a_flags) $(modkern_aflags)
 
-cpp_flags      = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE)     \
+cpp_flags      = -Wp,-MD,$(depfile) $(_nostdinc_flags) $(LINUXINCLUDE)     \
 		 $(__cpp_flags)
 
 ld_flags       = $(LDFLAGS) $(ldflags-y)
scripts/kconfig/Makefile +13 -2
index bd9b673..27d3890 100644
@@ -106,8 +106,19 @@ else
 	$(Q)$< --defconfig=arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig)
 endif
 
-%_defconfig: $(obj)/conf
-	$(Q)$< --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig)
+sinclude $(objtree)/include/config.mk
+
+SRCARCH = $(ARCH)
+
+CONFIGDIR := board/$(VENDOR)/$(BOARD)/configs
+
+# Create a default config if needed
+%_config: $(obj)/conf
+	$(Q)if [ ! -f $(CONFIGDIR)/$@ ]; then \
+		mkdir -p $(CONFIGDIR); \
+		touch $(CONFIGDIR)/$@; \
+	fi
+	$(Q)$< --defconfig=$(CONFIGDIR)/$@ $(Kconfig)
 
 # Help text used by make help
 help:
scripts/link-vmlinux.sh +7 -6
index b3d907e..bc42b06 100644
@@ -52,10 +52,15 @@ vmlinux_link()
 {
 	local lds="${objtree}/${KBUILD_LDS}"
 
-	if [ "${SRCARCH}" != "um" ]; then
+	if [ "${SRCARCH}" == "sandbox" ]; then
+		# Use gcc for sandbox, so we find the right libraries
+		${CC} -o ${2} -T ${lds} ${KBUILD_VMLINUX_INIT} \
+			-Wl,--start-group ${KBUILD_VMLINUX_MAIN} \
+			-Wl,--end-group ${FINAL_LIBS}
+	elif [ "${SRCARCH}" != "um" ]; then
 		${LD} ${LDFLAGS} ${LDFLAGS_vmlinux} -o ${2}                  \
 			-T ${lds} ${KBUILD_VMLINUX_INIT}                     \
-			--start-group ${KBUILD_VMLINUX_MAIN} --end-group ${1}
+			--start-group ${KBUILD_VMLINUX_MAIN} --end-group
 	else
 		${CC} ${CFLAGS_vmlinux} -o ${2}                              \
 			-Wl,-T,${lds} ${KBUILD_VMLINUX_INIT}                 \
@@ -136,10 +141,6 @@ fi
 
 #link vmlinux.o
 info LD vmlinux.o
-modpost_link vmlinux.o
-
-# modpost vmlinux.o to check for section mismatches
-${MAKE} -f "${srctree}/scripts/Makefile.modpost" vmlinux.o
 
 # Update version
 info GEN .version
Signature · 1 line
1.8.2.1
#11 lore raw

RFC PATCH 5/7 Adjust Kconfig scripts for use by U-Boot

Hello, Simon.

Please let me ask some more questions.

By applying these series of commits,
U-Boot's config file scheme and Kconfig coexist.

For example, scripts/Makefile.build includes
both auto.conf generated by Kconfig
and autoconf.mk derived from U-boot's config.

-include include/config/auto.conf
-include $(objtree)/include/config/autoconf.mk

I think the redundancy and dirtiness do not matter if they are temporary.

What I'd like to make clear is our goal.
It is intended to move all U-Boot's config files
to Kconfig over long time and
after that, delete U-Boot's config system.
Is this right?

If the answer is yes, there are some macros
I don't know how to port to Kconfig.

For example,
CONFIG_SYS_BAUDRATE_TABLE is defined like follows.

#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}

To my knowledge this macro can not be described by Kconfig.

Do you have any good idea about this?

And also, some config files still include macros without CONFIG_ prefix. For example, LINUX_BOOT_PARAM_ADDR, PHYS_SDRAM_1, PHYS_SDRAM_2, etc.

Best Regards,
Masahiro Yamada

#12 lore raw

RFC PATCH 5/7 Adjust Kconfig scripts for use by U-Boot

Quoted 14 lines · Masahiro Yamada

Hello, Simon.

Please let me ask some more questions.

By applying these series of commits,
U-Boot's config file scheme and Kconfig coexist.

For example, scripts/Makefile.build includes
both auto.conf generated by Kconfig
and autoconf.mk derived from U-boot's config.

(quoted diff) +0 -2
-include include/config/auto.conf
-include $(objtree)/include/config/autoconf.mk
Quoted 8 lines

I think the redundancy and dirtiness do not matter if they are temporary.

What I'd like to make clear is our goal.
It is intended to move all U-Boot's config files
to Kconfig over long time and
after that, delete U-Boot's config system.
Is this right?

Yes, long term.

Quoted 10 lines

If the answer is yes, there are some macros
I don't know how to port to Kconfig.

For example,
CONFIG_SYS_BAUDRATE_TABLE is defined like follows.

#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}

To my knowledge this macro can not be described by Kconfig.

We would probably want to change it to something like:
- Do you want the standard baud rate table?
Yes: 9600/19200/38400/57600/115200
No: Prompt for string value of comma sep list of rates

And in the right header:
#ifdef CONFIG_SYS_STD_BAUD_RATE
#define BAUDRATTE_TABLE { 9600, .... }
#else
#define BAUDRATE_TABLE { CONFIG_SYS_PROMPTED_VALUE } #endif

Quoted 2 lines

And also, some config files still include macros without CONFIG_ prefix. For example, LINUX_BOOT_PARAM_ADDR, PHYS_SDRAM_1, PHYS_SDRAM_2, etc.

These don't belong in the config file, and need to be either in the board or <asm/arch/> or similar construct instead.

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130529/db9f32f0/attachment.pgp>
#13 lore raw

RFC PATCH 5/7 Adjust Kconfig scripts for use by U-Boot

Hi, Tom.

Quoted 11 lines

We would probably want to change it to something like:
- Do you want the standard baud rate table?
Yes: 9600/19200/38400/57600/115200
No: Prompt for string value of comma sep list of rates

And in the right header:
#ifdef CONFIG_SYS_STD_BAUD_RATE
#define BAUDRATTE_TABLE { 9600, .... }
#else
#define BAUDRATE_TABLE { CONFIG_SYS_PROMPTED_VALUE } #endif

Could you explain a little further?

According to Documentation/kbuild/kconfig-languate.txt, Kconfig treats "bool"/"tristate"/"string"/"hex"/"int" types. Which type can we use for CONFIG_SYS_PROMPTED_VALUE?

Kconfig allows one value for hex and int type,
so we can't use them.

For a test, I wrote Kconfig using string type as follows:

config SYS_STD_BAUD_RATE
bool "Do you want the standard baud rate table?"

config SYS_PROMPTED_VALUE
string "Input comma sep list of baud rates" depends on !SYS_STD_BAUD_RATE

I got .config as follows:

# CONFIG_SYS_STD_BAUD_RATE is not set
CONFIG_SYS_PROMPTED_VALUE="19200,38400,115200"

And I got include/generated/autoconf.h as follows:

#define CONFIG_SYS_PROMPTED_VALUE "19200,38400,115200"

So, my question is how to create
a comma sep value list 19200,38400,115200
from a string "19200,38400,115200".

I am afraid

Quoted 1 line

#define BAUDRATE_TABLE { CONFIG_SYS_PROMPTED_VALUE }

does not work.

I did not think of any good idea to treat this with preprocessor.

Only idea I was stuck for was to parse the string
at runtime.

#define CONFIG_SYS_BAUDRATE_TABLE "19200,38400,115200" #define MAX_BAUD_RATE_TABLE 16

int baudrate_table[MAX_BAUD_RATE_TABLE];
int string2array(int *, const char *);

   string2array(baudrate_table, CONFIG_SYS_BUADRATE_TABLE);

Any other ideas?

Quoted 5 lines
Quoted 2 lines

And also, some config files still include macros without CONFIG_ prefix. For example, LINUX_BOOT_PARAM_ADDR, PHYS_SDRAM_1, PHYS_SDRAM_2, etc.

These don't belong in the config file, and need to be either in the board or <asm/arch/> or similar construct instead.

I see.

Actually, some include/configs/*.h files still include them, so we need to move them to somewhere else, or add prefix like CONFIG_LINUX_BOOT_PARAM_ADDR.

Best Regards,
Masahiro Yamada

#14 lore raw

RFC PATCH 5/7 Adjust Kconfig scripts for use by U-Boot

Quoted 20 lines · Masahiro Yamada

Hi, Tom.

Quoted 11 lines

We would probably want to change it to something like:
- Do you want the standard baud rate table?
Yes: 9600/19200/38400/57600/115200
No: Prompt for string value of comma sep list of rates

And in the right header:
#ifdef CONFIG_SYS_STD_BAUD_RATE
#define BAUDRATTE_TABLE { 9600, .... }
#else
#define BAUDRATE_TABLE { CONFIG_SYS_PROMPTED_VALUE } #endif

Could you explain a little further?

According to Documentation/kbuild/kconfig-languate.txt, Kconfig treats "bool"/"tristate"/"string"/"hex"/"int" types. Which type can we use for CONFIG_SYS_PROMPTED_VALUE?

[snip]

Quoted 3 lines

And I got include/generated/autoconf.h as follows:

#define CONFIG_SYS_PROMPTED_VALUE "19200,38400,115200"

Ah, damn. I was thinking string, but that won't work as you've shown (thanks!). Perhaps the best answer is we can do a choice of std table, full table, 115200, 230400, 9600 and any other single values people really need.

Quoted 11 lines
Quoted 5 lines
Quoted 2 lines

And also, some config files still include macros without CONFIG_ prefix. For example, LINUX_BOOT_PARAM_ADDR, PHYS_SDRAM_1, PHYS_SDRAM_2, etc.

These don't belong in the config file, and need to be either in the board or <asm/arch/> or similar construct instead.

I see.

Actually, some include/configs/*.h files still include them, so we need to move them to somewhere else, or add prefix like CONFIG_LINUX_BOOT_PARAM_ADDR.

There's certainly some header cleanup that needs to happen before a full transition can happen. In TI-land there's lots of dependencies on headers being in the config, only a few of which are needed, and require real thought (things like CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_INIT_SP_ADDR).

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130531/587f223c/attachment.pgp>
#15 lore raw

RFC PATCH 6/7 Enable Kconfig for U-Boot

In reply to Simon Glass

To use this, do

make -f Makefile.kbuild

when building U-Boot, instead of just

make

---
 .gitignore    |  6 ++++++
 config.mk     |  5 +++++
 init/Makefile | 21 +++++++++++++++++++++
 init/main.c   |  0
 rules.mk      | 25 +++++++++++++++++++++++++
 5 files changed, 57 insertions(+)
 create mode 100644 init/Makefile
 create mode 100644 init/main.c
.gitignore +6 -0
index ed21203..7e1bf99 100644
@@ -81,3 +81,9 @@ cscope.*
 
 # spl ais files
 /spl/*.ais
+
+# new things
+modules.order
+*.o.cmd
+.config
+*.cmd
config.mk +5 -0
index ddf350e..f5a5756 100644
@@ -21,6 +21,9 @@
 # MA 02111-1307 USA
 #
 
+# Skip this entire file if using Kconfig
+ifeq ($(KCONFIG_CONFIG),)
+
 #########################################################################
 
 # Set shell to bash if possible, otherwise fall back to sh
@@ -362,3 +365,5 @@ cmd_link_o_target = $(if $(strip $1),\
 		      rm -f $@; $(AR) rcs $@ )
 
 #########################################################################
+
+endif  # Kconfig skip
init/Makefile new file +21 -0
new file mode 100644
index 0000000..0168bbc
@@ -0,0 +1,21 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y                          := main.o #version.o
+
+# dependencies on generated files need to be listed explicitly
+$(obj)/version.o: include/generated/compile.h
+
+# compile.h changes depending on hostname, generation number, etc,
+# so we regenerate it always.
+# mkcompile_h will make sure to only update the
+# actual file if its content has changed.
+
+       chk_compile.h = :
+ quiet_chk_compile.h = echo '  CHK     $@'
+silent_chk_compile.h = :
+include/generated/compile.h: FORCE
+	@$($(quiet)chk_compile.h)
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkcompile_h $@ \
+	"$(UTS_MACHINE)" "$(CONFIG_SMP)" "$(CONFIG_PREEMPT)" "$(CC) $(KBUILD_CFLAGS)"
init/main.c new file +0 -0
new file mode 100644
index 0000000..e69de29
rules.mk +25 -0
index fa929f9..84c27c4 100644
@@ -21,6 +21,9 @@
 # MA 02111-1307 USA
 #
 
+# For Kconfig we do something completely different
+ifeq ($(KCONFIG_CONFIG),)
+
 #########################################################################
 
 _depend:	$(obj).depend
@@ -66,3 +69,25 @@ $(NOPEDOBJS): $(obj)%.o: %.c
 	$(HOSTCC) $(HOSTCFLAGS_NOPED) $(HOSTCFLAGS_$(@F)) $(HOSTCFLAGS_$(BCURDIR)) -o $@ $< -c
 
 #########################################################################
+
+else
+# Kconfig implementaiton
+
+# Pick up any object files that ended up in COBJS
+obj-y += $(COBJS)
+
+# Assembler files also
+obj-y += $(SOBJS)
+
+# File containing start of U-Boot
+obj-y += $(STARTOBJS)
+
+# ARM has some library files we want
+obj-y += $(GLSOBJS) $(GLCOBJS)
+
+# Mark those in COBJS- as missing (available but not to be linked)
+# Otherwise kbuild will fail to create an empty built-in.o in this
+# directory.
+obj- += $(COBJS-)
+
+endif
Signature · 1 line
1.8.2.1
#16 lore raw

RFC PATCH 7/7 Switch over to Kbuild

In reply to Simon Glass

This is just for testing, to show what failures exist when moving to the Kbuild-based build system. Unfortunately due to broken out-of-tree building, buildman just gives an error on this commit.

---
 Makefile        | 2147 +++++++++++++++++++++++++++++++++++--------------------
 Makefile.kbuild | 1521 ---------------------------------------
 Makefile.legacy |  900 +++++++++++++++++++++++
 3 files changed, 2284 insertions(+), 2284 deletions(-)
 delete mode 100644 Makefile.kbuild
 create mode 100644 Makefile.legacy
Makefile +1384 -763
index dbc4b70..438014a 100644
@@ -1,754 +1,915 @@
-#
-# (C) Copyright 2000-2012
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundatio; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
 VERSION = 2013
 PATCHLEVEL = 04
 SUBLEVEL =
 EXTRAVERSION =
+NAME = Uncular Umbrella
 ifneq "$(SUBLEVEL)" ""
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 else
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
 endif
-TIMESTAMP_FILE = $(obj)include/generated/timestamp_autogenerated.h
-VERSION_FILE = $(obj)include/generated/version_autogenerated.h
-
-HOSTARCH := $(shell uname -m | \
-	sed -e s/i.86/x86/ \
-	    -e s/sun4u/sparc64/ \
-	    -e s/arm.*/arm/ \
-	    -e s/sa110/arm/ \
-	    -e s/ppc64/powerpc/ \
-	    -e s/ppc/powerpc/ \
-	    -e s/macppc/powerpc/\
-	    -e s/sh.*/sh/)
-
-HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
-	    sed -e 's/\(cygwin\).*/cygwin/')
-
-export	HOSTARCH HOSTOS
-
-# Deal with colliding definitions from tcsh etc.
-VENDOR=
 
-#########################################################################
-# Allow for silent builds
-ifeq (,$(findstring s,$(MAKEFLAGS)))
-XECHO = echo
-else
-XECHO = :
-endif
-
-#########################################################################
-#
-# U-boot build supports producing a object files to the separate external
-# directory. Two use cases are supported:
-#
-# 1) Add O= to the make command line
-# 'make O=/tmp/build all'
+# *DOCUMENTATION*
+# To see a list of typical targets execute "make help"
+# More info can be located in ./README
+# Comments in this file are targeted only to the developer, do not
+# expect to learn how to build the kernel reading this file.
+
+# Do not:
+# o  use make's built-in rules and variables
+#    (this increases performance and avoids hard-to-debug behaviour);
+# o  print "Entering directory ...";
+MAKEFLAGS += -rR --no-print-directory
+
+# Avoid funny character set dependencies
+unexport LC_ALL
+LC_COLLATE=C
+LC_NUMERIC=C
+export LC_COLLATE LC_NUMERIC
+
+# We are using a recursive build, so we need to do a little thinking
+# to get the ordering right.
 #
-# 2) Set environement variable BUILD_DIR to point to the desired location
-# 'export BUILD_DIR=/tmp/build'
-# 'make'
-#
-# The second approach can also be used with a MAKEALL script
-# 'export BUILD_DIR=/tmp/build'
-# './MAKEALL'
-#
-# Command line 'O=' setting overrides BUILD_DIR environent variable.
-#
-# When none of the above methods is used the local build is performed and
-# the object files are placed in the source directory.
+# Most importantly: sub-Makefiles should only ever modify files in
+# their own directory. If in some directory we have a dependency on
+# a file in another dir (which doesn't happen often, but it's often
+# unavoidable when linking the built-in.o targets which finally
+# turn into vmlinux), we will call a sub make in that other dir, and
+# after that we are sure that everything which is in that other dir
+# is now up to date.
 #
+# The only cases where we need to modify files which have global
+# effects are thus separated out and done before the recursive
+# descending is started. They are now explicitly listed as the
+# prepare rule.
 
-ifdef O
-ifeq ("$(origin O)", "command line")
-BUILD_DIR := $(O)
+# To put more focus on warnings, be less verbose as default
+# Use 'make V=1' to see the full commands
+
+ifeq ("$(origin V)", "command line")
+  KBUILD_VERBOSE = $(V)
 endif
+ifndef KBUILD_VERBOSE
+  KBUILD_VERBOSE = 0
 endif
 
 # Call a source code checker (by default, "sparse") as part of the
 # C compilation.
 #
-# Use 'make C=1' to enable checking of re-compiled files.
+# Use 'make C=1' to enable checking of only re-compiled files.
+# Use 'make C=2' to enable checking of *all* source files, regardless
+# of whether they are re-compiled or not.
 #
-# See the linux kernel file "Documentation/sparse.txt" for more details,
-# including where to get the "sparse" utility.
+# See the file "Documentation/sparse.txt" for more details, including
+# where to get the "sparse" utility.
 
-ifdef C
 ifeq ("$(origin C)", "command line")
-CHECKSRC := $(C)
+  KBUILD_CHECKSRC = $(C)
 endif
+ifndef KBUILD_CHECKSRC
+  KBUILD_CHECKSRC = 0
 endif
-ifndef CHECKSRC
-  CHECKSRC = 0
+
+# Use make M=dir to specify directory of external module to build
+# Old syntax make ... SUBDIRS=$PWD is still supported
+# Setting the environment variable KBUILD_EXTMOD take precedence
+ifdef SUBDIRS
+  KBUILD_EXTMOD ?= $(SUBDIRS)
 endif
-export CHECKSRC
 
-ifneq ($(BUILD_DIR),)
-saved-output := $(BUILD_DIR)
+ifeq ("$(origin M)", "command line")
+  KBUILD_EXTMOD := $(M)
+endif
 
-# Attempt to create a output directory.
-$(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR})
+# kbuild supports saving output files in a separate directory.
+# To locate output files in a separate directory two syntaxes are supported.
+# In both cases the working directory must be the root of the kernel src.
+# 1) O=
+# Use "make O=dir/to/store/output/files/"
+#
+# 2) Set KBUILD_OUTPUT
+# Set the environment variable KBUILD_OUTPUT to point to the directory
+# where the output files shall be placed.
+# export KBUILD_OUTPUT=dir/to/store/output/files/
+# make
+#
+# The O= assignment takes precedence over the KBUILD_OUTPUT environment
+# variable.
 
-# Verify if it was successful.
-BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd)
-$(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist))
-endif # ifneq ($(BUILD_DIR),)
 
-OBJTREE		:= $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR))
-SPLTREE		:= $(OBJTREE)/spl
-SRCTREE		:= $(CURDIR)
-TOPDIR		:= $(SRCTREE)
-LNDIR		:= $(OBJTREE)
-export	TOPDIR SRCTREE OBJTREE SPLTREE
+# KBUILD_SRC is set on invocation of make in OBJ directory
+# KBUILD_SRC is not intended to be used by the regular user (for now)
+ifeq ($(KBUILD_SRC),)
 
-MKCONFIG	:= $(SRCTREE)/mkconfig
-export MKCONFIG
+# OK, Make called in directory where kernel src resides
+# Do we want to locate output files in a separate directory?
+ifeq ("$(origin O)", "command line")
+  KBUILD_OUTPUT := $(O)
+endif
 
-ifneq ($(OBJTREE),$(SRCTREE))
-REMOTE_BUILD	:= 1
-export REMOTE_BUILD
+ifeq ("$(origin W)", "command line")
+  export KBUILD_ENABLE_EXTRA_GCC_CHECKS := $(W)
 endif
 
-# $(obj) and (src) are defined in config.mk but here in main Makefile
-# we also need them before config.mk is included which is the case for
-# some targets like unconfig, clean, clobber, distclean, etc.
-ifneq ($(OBJTREE),$(SRCTREE))
-obj := $(OBJTREE)/
-src := $(SRCTREE)/
+# That's our default target when none is given on the command line
+PHONY := _all
+_all:
+
+# Cancel implicit rules on top Makefile
+$(CURDIR)/Makefile Makefile: ;
+
+MKCONFIG	= $(srctree)/mkconfig
+
+ifneq ($(KBUILD_OUTPUT),)
+# Invoke a second make in the output directory, passing relevant variables
+# check that the output directory actually exists
+saved-output := $(KBUILD_OUTPUT)
+KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
+$(if $(KBUILD_OUTPUT),, \
+     $(error output directory "$(saved-output)" does not exist))
+
+PHONY += $(MAKECMDGOALS) sub-make
+
+$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
+	@:
+
+sub-make: FORCE
+	$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
+	KBUILD_SRC=$(CURDIR) \
+	KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
+	$(filter-out _all sub-make,$(MAKECMDGOALS))
+
+# Leave processing to above invocation of make
+skip-makefile := 1
+endif # ifneq ($(KBUILD_OUTPUT),)
+endif # ifeq ($(KBUILD_SRC),)
+
+# We process the rest of the Makefile if this is the final invocation of make
+ifeq ($(skip-makefile),)
+
+# If building an external module we do not care about the all: rule
+# but instead _all depend on modules
+PHONY += all
+ifeq ($(KBUILD_EXTMOD),)
+_all: all
 else
-obj :=
-src :=
+_all: modules
 endif
-export obj src
 
-# Make sure CDPATH settings don't interfere
-unexport CDPATH
+srctree		:= $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
+objtree		:= $(CURDIR)
+src		:= $(srctree)
+obj		:= $(objtree)
 
-#########################################################################
+VPATH		:= $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
 
-# The "tools" are needed early, so put this first
-# Don't include stuff already done in $(LIBS)
-# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
-# is "yes"), so compile examples after U-Boot is compiled.
-SUBDIR_TOOLS = tools
-SUBDIR_EXAMPLES = examples/standalone examples/api
-SUBDIRS = $(SUBDIR_TOOLS)
+export srctree objtree VPATH
 
-.PHONY : $(SUBDIRS) $(VERSION_FILE) $(TIMESTAMP_FILE)
+# We use Makefile.kbuild instead of Makefile for now. To be removed.
+MAKEFILE_NAME := $(srctree)/Makefile
 
-ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk))
+# U-Boot's directory nanes used by old Makefiles. To be removed.
+TOPDIR := $(srctree)
+SRCTREE := $(srctree)
+OBJTREE = $(objtree)
+export SRCTREE TOPDIR OBJTREE
 
-# Include autoconf.mk before config.mk so that the config options are available
-# to all top level build files.  We need the dummy all: target to prevent the
-# dependency target in autoconf.mk.dep from being the default.
-all:
-sinclude $(obj)include/autoconf.mk.dep
-sinclude $(obj)include/autoconf.mk
+# Export U-Boot variables
+export BOARD CPU SOC VENDOR
 
-ifndef CONFIG_SANDBOX
-SUBDIRS += $(SUBDIR_EXAMPLES)
-endif
+TIMESTAMP_FILE = $(objtree)/include/generated/timestamp_autogenerated.h
+VERSION_FILE = $(objtree)/include/generated/version_autogenerated.h
 
-# load ARCH, BOARD, and CPU configuration
-include $(obj)include/config.mk
-export	ARCH CPU BOARD VENDOR SOC
+# SUBARCH tells the usermode build what the underlying arch is.  That is set
+# first, and if a usermode build is happening, the "ARCH=um" on the command
+# line overrides the setting of ARCH below.  If a native build is happening,
+# then ARCH is assigned, getting whatever value it gets normally, and
+# SUBARCH is subsequently ignored.
 
-# set default to nothing for native builds
-ifeq ($(HOSTARCH),$(ARCH))
-CROSS_COMPILE ?=
+SUBARCH := $(shell uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/ \
+				  -e s/sun4u/sparc64/ \
+				  -e s/arm.*/arm/ -e s/sa110/arm/ \
+				  -e s/s390x/s390/ -e s/parisc64/parisc/ \
+				  -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
+				  -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ )
+
+# Cross compiling and selecting different set of gcc/bin-utils
+# ---------------------------------------------------------------------------
+#
+# When performing cross compilation for other architectures ARCH shall be set
+# to the target architecture. (See arch/* for the possibilities).
+# ARCH can be set during invocation of make:
+# make ARCH=ia64
+# Another way is to have ARCH set in the environment.
+# The default ARCH is the host where make is executed.
+
+# CROSS_COMPILE specify the prefix used for all executables used
+# during compilation. Only gcc and related bin-utils executables
+# are prefixed with $(CROSS_COMPILE).
+# CROSS_COMPILE can be set on the command line
+# make CROSS_COMPILE=ia64-linux-
+# Alternatively CROSS_COMPILE can be set in the environment.
+# A third alternative is to store a setting in .config so that plain
+# "make" in the configured kernel build directory always uses that.
+# Default value for CROSS_COMPILE is not to prefix executables
+# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
+#ARCH		?= $(SUBARCH)
+CROSS_COMPILE	?= $(CONFIG_CROSS_COMPILE:"%"=%)
+
+# Architecture as present in compile.h
+UTS_MACHINE 	:= $(ARCH)
+SRCARCH 	:= $(ARCH)
+
+# Additional ARCH settings for x86
+ifeq ($(ARCH),i386)
+        SRCARCH := x86
+endif
+ifeq ($(ARCH),x86_64)
+        SRCARCH := x86
 endif
 
-# load other configuration
-include $(TOPDIR)/config.mk
+# Additional ARCH settings for sparc
+ifeq ($(ARCH),sparc32)
+       SRCARCH := sparc
+endif
+ifeq ($(ARCH),sparc64)
+       SRCARCH := sparc
+endif
 
-# Targets which don't build the source code
-NON_BUILD_TARGETS = backup clean clobber distclean mkproper tidy unconfig
+# Additional ARCH settings for sh
+ifeq ($(ARCH),sh64)
+       SRCARCH := sh
+endif
 
-# Only do the generic board check when actually building, not configuring
-ifeq ($(filter $(NON_BUILD_TARGETS),$(MAKECMDGOALS)),)
-ifeq ($(findstring _config,$(MAKECMDGOALS)),)
-$(CHECK_GENERIC_BOARD)
+# Additional ARCH settings for tile
+ifeq ($(ARCH),tilepro)
+       SRCARCH := tile
 endif
+ifeq ($(ARCH),tilegx)
+       SRCARCH := tile
 endif
 
-# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
-# that (or fail if absent).  Otherwise, search for a linker script in a
-# standard location.
+# Where to locate arch specific headers
+hdr-arch  := $(SRCARCH)
 
-LDSCRIPT_MAKEFILE_DIR = $(dir $(LDSCRIPT))
+KCONFIG_CONFIG	?= .config
+export KCONFIG_CONFIG
 
-ifndef LDSCRIPT
-	#LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds.debug
-	ifdef CONFIG_SYS_LDSCRIPT
-		# need to strip off double quotes
-		LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT))
-	endif
-endif
+# SHELL used by kbuild
+CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
+	  else if [ -x /bin/bash ]; then echo /bin/bash; \
+	  else echo sh; fi ; fi)
 
-# If there is no specified link script, we look in a number of places for it
-ifndef LDSCRIPT
-	ifeq ($(CONFIG_NAND_U_BOOT),y)
-		LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds
-		ifeq ($(wildcard $(LDSCRIPT)),)
-			LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds
-		endif
-	endif
-	ifeq ($(wildcard $(LDSCRIPT)),)
-		LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds
-	endif
-	ifeq ($(wildcard $(LDSCRIPT)),)
-		LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot.lds
-	endif
-	ifeq ($(wildcard $(LDSCRIPT)),)
-		LDSCRIPT := $(TOPDIR)/arch/$(ARCH)/cpu/u-boot.lds
-		# We don't expect a Makefile here
-		LDSCRIPT_MAKEFILE_DIR =
-	endif
-	ifeq ($(wildcard $(LDSCRIPT)),)
-$(error could not find linker script)
-	endif
+HOSTCC       = gcc
+HOSTCXX      = g++
+HOSTCFLAGS   = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer
+HOSTCXXFLAGS = -O2
+
+# Decide whether to build built-in, modular, or both.
+# Normally, just do built-in.
+
+KBUILD_MODULES :=
+KBUILD_BUILTIN := 1
+
+#	If we have only "make modules", don't compile built-in objects.
+#	When we're building modules with modversions, we need to consider
+#	the built-in objects during the descend as well, in order to
+#	make sure the checksums are up to date before we record them.
+
+ifeq ($(MAKECMDGOALS),modules)
+  KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
 endif
 
-#########################################################################
-# U-Boot objects....order is important (i.e. start must be first)
+#	If we have "make <whatever> modules", compile modules
+#	in addition to whatever we do anyway.
+#	Just "make" or "make all" shall build modules as well
 
-OBJS  = $(CPUDIR)/start.o
-ifeq ($(CPU),ppc4xx)
-OBJS += $(CPUDIR)/resetvec.o
+ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
+  KBUILD_MODULES := 1
 endif
-ifeq ($(CPU),mpc85xx)
-OBJS += $(CPUDIR)/resetvec.o
+
+ifeq ($(MAKECMDGOALS),)
+  KBUILD_MODULES := 1
 endif
 
-OBJS := $(addprefix $(obj),$(OBJS))
+# But for now at least, U-Boot does not have modules
+KBUILD_MODULES :=
 
-HAVE_VENDOR_COMMON_LIB = $(if $(wildcard board/$(VENDOR)/common/Makefile),y,n)
+export KBUILD_MODULES KBUILD_BUILTIN
+export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
 
-LIBS-y += lib/libgeneric.o
-LIBS-y += lib/lzma/liblzma.o
-LIBS-y += lib/lzo/liblzo.o
-LIBS-y += lib/zlib/libz.o
-LIBS-$(CONFIG_TIZEN) += lib/tizen/libtizen.o
-LIBS-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/lib$(VENDOR).o
-LIBS-y += $(CPUDIR)/lib$(CPU).o
-ifdef SOC
-LIBS-y += $(CPUDIR)/$(SOC)/lib$(SOC).o
-endif
-ifeq ($(CPU),ixp)
-LIBS-y += drivers/net/npe/libnpe.o
-endif
-LIBS-$(CONFIG_OF_EMBED) += dts/libdts.o
-LIBS-y += arch/$(ARCH)/lib/lib$(ARCH).o
-LIBS-y += fs/libfs.o \
-	fs/cbfs/libcbfs.o \
-	fs/cramfs/libcramfs.o \
-	fs/ext4/libext4fs.o \
-	fs/fat/libfat.o \
-	fs/fdos/libfdos.o \
-	fs/jffs2/libjffs2.o \
-	fs/reiserfs/libreiserfs.o \
-	fs/sandbox/libsandboxfs.o \
-	fs/ubifs/libubifs.o \
-	fs/yaffs2/libyaffs2.o \
-	fs/zfs/libzfs.o
-LIBS-y += net/libnet.o
-LIBS-y += disk/libdisk.o
-LIBS-y += drivers/bios_emulator/libatibiosemu.o
-LIBS-y += drivers/block/libblock.o
-LIBS-$(CONFIG_BOOTCOUNT_LIMIT) += drivers/bootcount/libbootcount.o
-LIBS-y += drivers/crypto/libcrypto.o
-LIBS-y += drivers/dma/libdma.o
-LIBS-y += drivers/fpga/libfpga.o
-LIBS-y += drivers/gpio/libgpio.o
-LIBS-y += drivers/hwmon/libhwmon.o
-LIBS-y += drivers/i2c/libi2c.o
-LIBS-y += drivers/input/libinput.o
-LIBS-y += drivers/misc/libmisc.o
-LIBS-y += drivers/mmc/libmmc.o
-LIBS-y += drivers/mtd/libmtd.o
-LIBS-y += drivers/mtd/nand/libnand.o
-LIBS-y += drivers/mtd/onenand/libonenand.o
-LIBS-y += drivers/mtd/ubi/libubi.o
-LIBS-y += drivers/mtd/spi/libspi_flash.o
-LIBS-y += drivers/net/libnet.o
-LIBS-y += drivers/net/phy/libphy.o
-LIBS-y += drivers/pci/libpci.o
-LIBS-y += drivers/pcmcia/libpcmcia.o
-LIBS-y += drivers/power/libpower.o \
-	drivers/power/fuel_gauge/libfuel_gauge.o \
-	drivers/power/pmic/libpmic.o \
-	drivers/power/battery/libbattery.o
-LIBS-y += drivers/spi/libspi.o
-LIBS-y += drivers/dfu/libdfu.o
-ifeq ($(CPU),mpc83xx)
-LIBS-y += drivers/qe/libqe.o
-LIBS-y += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
-LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
-endif
-ifeq ($(CPU),mpc85xx)
-LIBS-y += drivers/qe/libqe.o
-LIBS-y += drivers/net/fm/libfm.o
-LIBS-y += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
-LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
-endif
-ifeq ($(CPU),mpc86xx)
-LIBS-y += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
-LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
-endif
-LIBS-y += drivers/rtc/librtc.o
-LIBS-y += drivers/serial/libserial.o
-LIBS-y += drivers/sound/libsound.o
-LIBS-y += drivers/tpm/libtpm.o
-LIBS-y += drivers/twserial/libtws.o
-LIBS-y += drivers/usb/eth/libusb_eth.o
-LIBS-y += drivers/usb/gadget/libusb_gadget.o
-LIBS-y += drivers/usb/host/libusb_host.o
-LIBS-y += drivers/usb/musb/libusb_musb.o
-LIBS-y += drivers/usb/musb-new/libusb_musb-new.o
-LIBS-y += drivers/usb/phy/libusb_phy.o
-LIBS-y += drivers/usb/ulpi/libusb_ulpi.o
-LIBS-y += drivers/video/libvideo.o
-LIBS-y += drivers/watchdog/libwatchdog.o
-LIBS-y += common/libcommon.o
-LIBS-y += lib/libfdt/libfdt.o
-LIBS-y += api/libapi.o
-LIBS-y += post/libpost.o
-LIBS-y += test/libtest.o
-
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
-LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
-endif
-
-ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35))
-LIBS-y += arch/$(ARCH)/imx-common/libimx-common.o
-endif
-
-ifeq ($(SOC),s5pc1xx)
-LIBS-y += $(CPUDIR)/s5p-common/libs5p-common.o
-endif
-ifeq ($(SOC),exynos)
-LIBS-y += $(CPUDIR)/s5p-common/libs5p-common.o
-endif
-ifneq ($(CONFIG_TEGRA),)
-LIBS-y += arch/$(ARCH)/cpu/$(SOC)-common/lib$(SOC)-common.o
-LIBS-y += arch/$(ARCH)/cpu/tegra-common/libcputegra-common.o
-LIBS-y += $(CPUDIR)/tegra-common/libtegra-common.o
-endif
-
-LIBS := $(addprefix $(obj),$(sort $(LIBS-y)))
-.PHONY : $(LIBS)
-
-LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).o
-LIBBOARD := $(addprefix $(obj),$(LIBBOARD))
-
-# Add GCC lib
-ifdef USE_PRIVATE_LIBGCC
-ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
-PLATFORM_LIBGCC = $(OBJTREE)/arch/$(ARCH)/lib/libgcc.o
-else
-PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc
-endif
-else
-PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
-endif
-PLATFORM_LIBS += $(PLATFORM_LIBGCC)
-export PLATFORM_LIBS
-
-# Special flags for CPP when processing the linker script.
-# Pass the version down so we can handle backwards compatibility
-# on the fly.
-LDPPFLAGS += \
-	-include $(TOPDIR)/include/u-boot/u-boot.lds.h \
-	-DCPUDIR=$(CPUDIR) \
-	$(shell $(LD) --version | \
-	  sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
-
-__OBJS := $(subst $(obj),,$(OBJS))
-__LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))
-
-#########################################################################
-#########################################################################
-
-ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
-BOARD_SIZE_CHECK = \
-	@actual=`wc -c $@ | awk '{print $$1}'`; \
-	limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
-	if test $$actual -gt $$limit; then \
-		echo "$@ exceeds file size limit:" >&2 ; \
-		echo "  limit:  $$limit bytes" >&2 ; \
-		echo "  actual: $$actual bytes" >&2 ; \
-		echo "  excess: $$((actual - limit)) bytes" >&2; \
-		exit 1; \
-	fi
+# Beautify output
+# ---------------------------------------------------------------------------
+#
+# Normally, we echo the whole command before executing it. By making
+# that echo $($(quiet)$(cmd)), we now have the possibility to set
+# $(quiet) to choose other forms of output instead, e.g.
+#
+#         quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
+#         cmd_cc_o_c       = $(CC) $(c_flags) -c -o $@ $<
+#
+# If $(quiet) is empty, the whole command will be printed.
+# If it is set to "quiet_", only the short version will be printed.
+# If it is set to "silent_", nothing will be printed@all, since
+# the variable $(silent_cmd_cc_o_c) doesn't exist.
+#
+# A simple variant is to prefix commands with $(Q) - that's useful
+# for commands that shall be hidden in non-verbose mode.
+#
+#	$(Q)ln $@ :<
+#
+# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
+# If KBUILD_VERBOSE equals 1 then the above command is displayed.
+
+ifeq ($(KBUILD_VERBOSE),1)
+  quiet =
+  Q =
 else
-BOARD_SIZE_CHECK =
+  quiet=quiet_
+  Q = @
 endif
 
-# Always append ALL so that arch config.mk's can add custom ones
-ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map
+# If the user is running make -s (silent mode), suppress echoing of
+# commands
 
-ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin
-ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin
-ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin
-ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin
-ifneq ($(CONFIG_SPL_TARGET),)
-ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET))
+ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
+  quiet=silent_
 endif
 
-# enable combined SPL/u-boot/dtb rules for tegra
-ifneq ($(CONFIG_TEGRA),)
-ifeq ($(CONFIG_OF_SEPARATE),y)
-ALL-y += $(obj)u-boot-dtb-tegra.bin
-else
-ALL-y += $(obj)u-boot-nodtb-tegra.bin
+export quiet Q KBUILD_VERBOSE
+
+
+# Look for make include files relative to root of kernel src
+MAKEFLAGS += --include-dir=$(srctree)
+
+# We need some generic definitions (do not try to remake the file).
+$(srctree)/scripts/Kbuild.include: ;
+include $(srctree)/scripts/Kbuild.include
+
+# Make variables (CC, etc...)
+
+AS		= $(CROSS_COMPILE)as
+LD		= $(CROSS_COMPILE)ld
+CC		= $(CROSS_COMPILE)gcc
+CPP		= $(CC) -E
+AR		= $(CROSS_COMPILE)ar
+NM		= $(CROSS_COMPILE)nm
+STRIP		= $(CROSS_COMPILE)strip
+OBJCOPY		= $(CROSS_COMPILE)objcopy
+OBJDUMP		= $(CROSS_COMPILE)objdump
+AWK		= awk
+GENKSYMS	= scripts/genksyms/genksyms
+INSTALLKERNEL  := installkernel
+DEPMOD		= /sbin/depmod
+PERL		= perl
+CHECK		= sparse
+
+CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
+		  -Wbitwise -Wno-return-void $(CF)
+CFLAGS_MODULE   =
+AFLAGS_MODULE   =
+LDFLAGS_MODULE  =
+CFLAGS_KERNEL	=
+AFLAGS_KERNEL	=
+CFLAGS_GCOV	= -fprofile-arcs -ftest-coverage
+
+
+# Use USERINCLUDE when you must reference the UAPI directories only.
+USERINCLUDE    := \
+		-I$(srctree)/arch/$(hdr-arch)/include/uapi \
+		-Iarch/$(hdr-arch)/include/generated/uapi \
+		-I$(srctree)/include/uapi \
+		-Iinclude/generated/uapi \
+                -include $(srctree)/include/linux/kconfig.h
+
+# Use LINUXINCLUDE when you must reference the include/ directory.
+# Needed to be compatible with the O= option
+LINUXINCLUDE    := \
+		-I$(srctree)/arch/$(hdr-arch)/include \
+		-Iarch/$(hdr-arch)/include/generated \
+		$(if $(KBUILD_SRC), -I$(srctree)/include) \
+		-Iinclude \
+		$(USERINCLUDE)
+
+KBUILD_CPPFLAGS := -D__KERNEL__
+
+gccincdir := $(shell $(CC) -print-file-name=include)
+
+KBUILD_CFLAGS   := -Wall -Wstrict-prototypes -Wno-trigraphs \
+		   -fno-strict-aliasing -fno-common \
+		   -Werror-implicit-function-declaration \
+		   -Wno-format-security \
+		   -fno-delete-null-pointer-checks \
+		   -fno-builtin -ffreestanding
+KBUILD_AFLAGS_KERNEL :=
+KBUILD_CFLAGS_KERNEL :=
+KBUILD_AFLAGS   := -D__ASSEMBLY__
+KBUILD_AFLAGS_MODULE  := -DMODULE
+KBUILD_CFLAGS_MODULE  := -DMODULE
+KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
+
+# Read KERNELRELEASE from include/config/kernel.release (if it exists)
+KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
+KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
+
+export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
+export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
+export CPP AR NM STRIP OBJCOPY OBJDUMP
+export MAKE AWK GENKSYMS INSTALLKERNEL PERL UTS_MACHINE
+export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
+
+export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
+export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV
+export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
+export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
+export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
+export KBUILD_ARFLAGS
+
+# When compiling out-of-tree modules, put MODVERDIR in the module
+# tree rather than in the kernel tree. The kernel tree might
+# even be read-only.
+export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
+
+# Files to ignore in find ... statements
+
+RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS \
+		   -o -name .pc -o -name .hg -o -name .git \) -prune -o
+export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
+			 --exclude CVS --exclude .pc --exclude .hg --exclude .git
+
+# ===========================================================================
+# Rules shared between *config targets and build targets
+
+# Basic helpers built in scripts/
+PHONY += scripts_basic
+scripts_basic:
+	$(Q)$(MAKE) $(build)=scripts/basic
+	$(Q)rm -f .tmp_quiet_recordmcount
+
+# To avoid any implicit rule to kick in, define an empty command.
+scripts/basic/%: scripts_basic ;
+
+PHONY += outputmakefile
+# outputmakefile generates a Makefile in the output directory, if using a
+# separate output directory. This allows convenient use of make in the
+# output directory.
+outputmakefile:
+ifneq ($(KBUILD_SRC),)
+	$(Q)ln -fsn $(srctree) source
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
+	    $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
 endif
+
+# Support for using generic headers in asm-generic
+PHONY += asm-generic
+asm-generic:
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
+	            src=asm obj=arch/$(SRCARCH)/include/generated/asm
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
+	            src=uapi/asm obj=arch/$(SRCARCH)/include/generated/uapi/asm
+
+# To make sure we do not include .config for any of the *config targets
+# catch them early, and hand them over to scripts/kconfig/Makefile
+# It is allowed to specify more targets when calling make, including
+# mixing *config targets and build targets.
+# For example 'make oldconfig all'.
+# Detect when mixed targets is specified, and make a second invocation
+# of make so .config is not included in this case either (for *config).
+
+version_h := include/generated/uapi/linux/version.h
+
+no-dot-config-targets := clean mrproper distclean \
+			 cscope gtags TAGS tags help %docs check% coccicheck \
+			 $(version_h) headers_% archheaders archscripts \
+			 kernelversion %src-pkg
+
+config-targets := 0
+mixed-targets  := 0
+dot-config     := 1
+
+ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
+	ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
+		dot-config := 0
+	endif
 endif
 
-all:		$(ALL-y) $(SUBDIR_EXAMPLES)
+ifeq ($(KBUILD_EXTMOD),)
+        ifneq ($(filter config %config,$(MAKECMDGOALS)),)
+                config-targets := 1
+                ifneq ($(filter-out config %config,$(MAKECMDGOALS)),)
+                        mixed-targets := 1
+                endif
+        endif
+endif
 
-$(obj)u-boot.dtb:	$(obj)u-boot
-		$(MAKE) -C dts binary
-		mv $(obj)dts/dt.dtb $@
+ifeq ($(mixed-targets),1)
+# ===========================================================================
+# We're called with mixed targets (*config and build targets).
+# Handle them one by one.
 
-$(obj)u-boot-dtb.bin:	$(obj)u-boot.bin $(obj)u-boot.dtb
-		cat $^ >$@
+%:: FORCE
+	$(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@
 
-$(obj)u-boot.hex:	$(obj)u-boot
-		$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
+else
+ifeq ($(config-targets),1)
+# ===========================================================================
+# *config targets only - make sure prerequisites are updated, and descend
+# in scripts/kconfig to make the *config target
+
+# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
+# KBUILD_DEFCONFIG may point out an alternative default configuration
+# used for 'make defconfig'arch/$(SRCARCH)/config.mk
+# include $(srctree)/arch/$(SRCARCH)/Makefile
+export KBUILD_DEFCONFIG KBUILD_KCONFIG
+
+config: scripts_basic outputmakefile FORCE
+	$(Q)mkdir -p include/linux include/config
+	$(Q)$(MAKE) $(build)=scripts/kconfig $@
+
+%_config: scripts_basic outputmakefile FORCE
+	$(Q)$(MKCONFIG) -A $(@:_config=)
+	$(Q)mkdir -p include/linux include/config
+	$(Q)$(MAKE) $(build)=scripts/kconfig $@
+	$(Q)rm -f $(objtree)/include/config/autoconf.mk.dep \
+		$(objtree)/include/config/autoconf.mk
+	$(Q)$(MAKE) -f scripts/Makefile.autoconf
+
+%config: scripts_basic outputmakefile FORCE
+	$(Q)mkdir -p include/linux include/config
+	$(Q)$(MAKE) $(build)=scripts/kconfig $@
 
-$(obj)u-boot.srec:	$(obj)u-boot
-		$(OBJCOPY) -O srec $< $@
+else
+# ===========================================================================
+# Build targets only - this includes vmlinux, arch specific targets, clean
+# targets and others. In general all targets except *config targets.
 
-$(obj)u-boot.bin:	$(obj)u-boot
-		$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
-		$(BOARD_SIZE_CHECK)
+SRCARCH = $(ARCH)
+include $(objtree)/include/config.mk
+include $(srctree)/arch/$(SRCARCH)/config.mk
+#include $(objtree)/include/config/autoconf.mk
 
-$(obj)u-boot.ldr:	$(obj)u-boot
-		$(CREATE_LDR_ENV)
-		$(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)
-		$(BOARD_SIZE_CHECK)
+KBUILD_CFLAGS += $(PLATFORM_CPPFLAGS)
 
-$(obj)u-boot.ldr.hex:	$(obj)u-boot.ldr
-		$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary
+ifeq ($(KBUILD_EXTMOD),)
+# Additional helpers built in scripts/
+# Carefully list dependencies so we do not try to build scripts twice
+# in parallel
+PHONY += scripts
+scripts: scripts_basic include/config/auto.conf include/config/tristate.conf
+	$(Q)$(MAKE) $(build)=$(@)
 
-$(obj)u-boot.ldr.srec:	$(obj)u-boot.ldr
-		$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
+HAVE_VENDOR_COMMON_LIB = $(if $(wildcard board/$(VENDOR)/common/Makefile),y,n)
 
-#
-# U-Boot entry point, needed for booting of full-blown U-Boot
-# from the SPL U-Boot version.
-#
-ifndef CONFIG_SYS_UBOOT_START
-CONFIG_SYS_UBOOT_START := 0
-endif
-
-$(obj)u-boot.img:	$(obj)u-boot.bin
-		$(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
-		-O u-boot -a $(CONFIG_SYS_TEXT_BASE) \
-		-e $(CONFIG_SYS_UBOOT_START) \
-		-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
-			sed -e 's/"[	 ]*$$/ for $(BOARD) board"/') \
-		-d $< $@
-
-$(obj)u-boot.imx: $(obj)u-boot.bin depend
-		$(MAKE) -C $(SRCTREE)/arch/arm/imx-common $(OBJTREE)/u-boot.imx
-
-$(obj)u-boot.kwb:       $(obj)u-boot.bin
-		$(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \
-		-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -d $< $@
-
-$(obj)u-boot.pbl:	$(obj)u-boot.bin
-		$(obj)tools/mkimage -n $(CONFIG_PBLRCW_CONFIG) \
-		-R $(CONFIG_PBLPBI_CONFIG) -T pblimage \
-		-d $< $@
-
-$(obj)u-boot.sha1:	$(obj)u-boot.bin
-		$(obj)tools/ubsha1 $(obj)u-boot.bin
-
-$(obj)u-boot.dis:	$(obj)u-boot
-		$(OBJDUMP) -d $< > $@
-
-
-
-$(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
-		$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_PAD_TO) \
-			-I binary -O binary $< $(obj)spl/u-boot-spl-pad.bin
-		cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
-		rm $(obj)spl/u-boot-spl-pad.bin
-
-$(obj)u-boot-with-spl.imx: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
-		$(MAKE) -C $(SRCTREE)/arch/arm/imx-common \
-			$(OBJTREE)/u-boot-with-spl.imx
-
-$(obj)u-boot-with-nand-spl.imx: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
-		$(MAKE) -C $(SRCTREE)/arch/arm/imx-common \
-			$(OBJTREE)/u-boot-with-nand-spl.imx
-
-$(obj)u-boot.ubl:       $(obj)u-boot-with-spl.bin
-		$(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \
-		-e $(CONFIG_SYS_TEXT_BASE) -d $< $(obj)u-boot.ubl
-
-$(obj)u-boot.ais:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
-		$(obj)tools/mkimage -s -n $(if $(CONFIG_AIS_CONFIG_FILE),$(CONFIG_AIS_CONFIG_FILE),"/dev/null") \
-			-T aisimage \
-			-e $(CONFIG_SPL_TEXT_BASE) \
-			-d $(obj)spl/u-boot-spl.bin \
-			$(obj)spl/u-boot-spl.ais
-		$(OBJCOPY) ${OBJCFLAGS} -I binary \
-			--pad-to=$(CONFIG_SPL_MAX_SIZE) -O binary \
-			$(obj)spl/u-boot-spl.ais $(obj)spl/u-boot-spl-pad.ais
-		cat $(obj)spl/u-boot-spl-pad.ais $(obj)u-boot.img > \
-			$(obj)u-boot.ais
-
-# Specify the target for use in elftosb call
-ELFTOSB_TARGET-$(CONFIG_MX23) = imx23
-ELFTOSB_TARGET-$(CONFIG_MX28) = imx28
-
-$(obj)u-boot.sb:       $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
-		elftosb -zf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \
-			-o $(obj)u-boot.sb
-
-# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
-# Both images are created using mkimage (crc etc), so that the ROM
-# bootloader can check its integrity. Padding needs to be done to the
-# SPL image (with mkimage header) and not the binary. Otherwise the resulting image
-# which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
-# The resulting image containing both U-Boot images is called u-boot.spr
-$(obj)u-boot.spr:	$(obj)u-boot.img $(obj)spl/u-boot-spl.bin
-		$(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
-		-a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER \
-		-d $(obj)spl/u-boot-spl.bin $(obj)spl/u-boot-spl.img
-		tr "\000" "\377" < /dev/zero | dd ibs=1 count=$(CONFIG_SPL_PAD_TO) \
-			of=$(obj)spl/u-boot-spl-pad.img 2>/dev/null
-		dd if=$(obj)spl/u-boot-spl.img of=$(obj)spl/u-boot-spl-pad.img \
-			conv=notrunc 2>/dev/null
-		cat $(obj)spl/u-boot-spl-pad.img $(obj)u-boot.img > $@
-
-ifneq ($(CONFIG_TEGRA),)
-ifeq ($(CONFIG_OF_SEPARATE),y)
-nodtb=dtb
-dtbfile=$(obj)u-boot.dtb
+# Objects we will link into vmlinux / subdirs we need to visit
+arch-y		:= arch/$(SRCARCH)/
+board-y		:= board/$(VENDOR)/$(BOARD)/
+board-$(HAVE_VENDOR_COMMON_LIB)	+= board/$(VENDOR)/common/
+core-y		:= common/
+disk-y		:= disk/
+drivers-y	:= drivers/
+fs-y		:= fs/
+init-y		:= init/
+libs-y		:= lib/
+net-y		:= net/
+spl-y		:= spl/
+endif # KBUILD_EXTMOD
+
+ifeq ($(dot-config),1)
+# Read in config
+-include include/config/auto.conf
+-include $(objtree)/include/config/autoconf.mk
+# -include $(srctree)/arch/$(SRCARCH)/config.mk
+
+ifeq ($(KBUILD_EXTMOD),)
+# Read in dependencies to all Kconfig* files, make sure to run
+# oldconfig if changes are detected.
+-include include/config/auto.conf.cmd
+
+# To avoid any implicit rule to kick in, define an empty command
+$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
+
+# If .config is newer than include/config/auto.conf, someone tinkered
+# with it and forgot to run make oldconfig.
+# if auto.conf.cmd is missing then we are probably in a cleaned tree so
+# we execute the config step to be sure to catch updated Kconfig files
+include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
+	$(warning check $@ missing $^)
+	$(Q)$(MAKE) -f $(MAKEFILE_NAME) silentoldconfig
 else
-nodtb=nodtb
-dtbfile=
-endif
-
-$(obj)u-boot-$(nodtb)-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(dtbfile)
-		$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
-		cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin $(dtbfile) > $@
-		rm $(obj)spl/u-boot-spl-pad.bin
-endif
-
-$(obj)u-boot-img.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
-		cat $(obj)spl/u-boot-spl.bin $(obj)u-boot.img > $@
-
-# PPC4xx needs the SPL at the end of the image, since the reset vector
-# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
-# and need to introduce a new build target with the full blown U-Boot
-# at the start padded up to the start of the SPL image. And then concat
-# the SPL image to the end.
-$(obj)u-boot-img-spl-at-end.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
-		tr "\000" "\377" < /dev/zero | dd ibs=1 count=$(CONFIG_UBOOT_PAD_TO) \
-			of=$(obj)u-boot-pad.img 2>/dev/null
-		dd if=$(obj)u-boot.img of=$(obj)u-boot-pad.img \
-			conv=notrunc 2>/dev/null
-		cat $(obj)u-boot-pad.img $(obj)spl/u-boot-spl.bin > $@
-
-ifeq ($(CONFIG_SANDBOX),y)
-GEN_UBOOT = \
-		cd $(LNDIR) && $(CC) $(SYMS) -T $(obj)u-boot.lds \
-			-Wl,--start-group $(__LIBS) -Wl,--end-group \
-			$(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map -o u-boot
+# external modules needs include/generated/autoconf.h and include/config/auto.conf
+# but do not care if they are up-to-date. Use auto.conf to trigger the test
+PHONY += include/config/auto.conf
+
+include/config/auto.conf:
+	$(Q)test -e include/generated/autoconf.h -a -e $@ || (		\
+	echo >&2;							\
+	echo >&2 "  ERROR: Kernel configuration is invalid.";		\
+	echo >&2 "         include/generated/autoconf.h or $@ are missing.";\
+	echo >&2 "         Run 'make oldconfig && make prepare' on kernel src to fix it.";	\
+	echo >&2 ;							\
+	/bin/false)
+
+endif # KBUILD_EXTMOD
+
 else
-GEN_UBOOT = \
-		cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
-			$(__OBJS) \
-			--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
-			-Map u-boot.map -o u-boot
+# Dummy target needed, because used as prerequisite
+include/config/auto.conf: ;
+endif # $(dot-config)
+
+# The all: target is the default when no target is given on the
+# command line.
+# This allow a user to issue only 'make' to build a kernel including modules
+# Defaults to vmlinux, but the arch makefile usually adds further targets
+all: vmlinux
+
+ifdef CONFIG_SPL
+all: spl/u-boot
 endif
 
-$(obj)u-boot:	depend \
-		$(SUBDIR_TOOLS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds
-		$(GEN_UBOOT)
-ifeq ($(CONFIG_KALLSYMS),y)
-		smap=`$(call SYSTEM_MAP,$(obj)u-boot) | \
-			awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
-		$(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \
-			-c common/system_map.c -o $(obj)common/system_map.o
-		$(GEN_UBOOT) $(obj)common/system_map.o
+ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+KBUILD_CFLAGS	+= -Os
+else
+KBUILD_CFLAGS	+= -O2
 endif
 
-$(OBJS):	depend
-		$(MAKE) -C $(CPUDIR) $(if $(REMOTE_BUILD),$@,$(notdir $@))
+#include $(srctree)/arch/$(SRCARCH)/Makefile
 
-$(LIBS):	depend $(SUBDIR_TOOLS)
-		$(MAKE) -C $(dir $(subst $(obj),,$@))
+ifdef CONFIG_READABLE_ASM
+# Disable optimizations that make assembler listings hard to read.
+# reorder blocks reorders the control in the function
+# ipa clone creates specialized cloned functions
+# partial inlining inlines only parts of functions
+KBUILD_CFLAGS += $(call cc-option,-fno-reorder-blocks,) \
+                 $(call cc-option,-fno-ipa-cp-clone,) \
+                 $(call cc-option,-fno-partial-inlining)
+endif
 
-$(LIBBOARD):	depend $(LIBS)
-		$(MAKE) -C $(dir $(subst $(obj),,$@))
+ifneq ($(CONFIG_FRAME_WARN),0)
+KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
+endif
 
-$(SUBDIRS):	depend
-		$(MAKE) -C $@ all
+# Force gcc to behave correct even for buggy distributions
+ifndef CONFIG_CC_STACKPROTECTOR
+KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector)
+endif
 
-$(SUBDIR_EXAMPLES): $(obj)u-boot
+# This warning generated too much noise in a regular build.
+# Use make W=1 to enable this warning (see scripts/Makefile.build)
+KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
 
-$(LDSCRIPT):	depend
-		$(MAKE) -C $(dir $@) $(notdir $@)
+ifdef CONFIG_FRAME_POINTER
+KBUILD_CFLAGS	+= -fno-omit-frame-pointer -fno-optimize-sibling-calls
+else
+# Some targets (ARM with Thumb2, for example), can't be built with frame
+# pointers.  For those, we don't have FUNCTION_TRACER automatically
+# select FRAME_POINTER.  However, FUNCTION_TRACER adds -pg, and this is
+# incompatible with -fomit-frame-pointer with current GCC, so we don't use
+# -fomit-frame-pointer with FUNCTION_TRACER.
+ifndef CONFIG_FUNCTION_TRACER
+KBUILD_CFLAGS	+= -fomit-frame-pointer
+endif
+endif
 
-$(obj)u-boot.lds: $(LDSCRIPT)
-		$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$< >$@
+ifdef CONFIG_DEBUG_INFO
+KBUILD_CFLAGS	+= -g
+KBUILD_AFLAGS	+= -gdwarf-2
+endif
 
-nand_spl:	$(TIMESTAMP_FILE) $(VERSION_FILE) depend
-		$(MAKE) -C nand_spl/board/$(BOARDDIR) all
+ifdef CONFIG_DEBUG_INFO_REDUCED
+KBUILD_CFLAGS 	+= $(call cc-option, -femit-struct-debug-baseonly)
+endif
 
-$(obj)u-boot-nand.bin:	nand_spl $(obj)u-boot.bin
-		cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
+ifdef CONFIG_FUNCTION_TRACER
+ifdef CONFIG_HAVE_FENTRY
+CC_USING_FENTRY	:= $(call cc-option, -mfentry -DCC_USING_FENTRY)
+endif
+KBUILD_CFLAGS	+= -pg $(CC_USING_FENTRY)
+KBUILD_AFLAGS	+= $(CC_USING_FENTRY)
+ifdef CONFIG_DYNAMIC_FTRACE
+	ifdef CONFIG_HAVE_C_RECORDMCOUNT
+		BUILD_C_RECORDMCOUNT := y
+		export BUILD_C_RECORDMCOUNT
+	endif
+endif
+endif
 
-$(obj)spl/u-boot-spl.bin:	$(SUBDIR_TOOLS) depend
-		$(MAKE) -C spl all
+# We trigger additional mismatches with less inlining
+ifdef CONFIG_DEBUG_SECTION_MISMATCH
+KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
+endif
 
-updater:
-		$(MAKE) -C tools/updater all
+# arch Makefile may override CC so keep this after arch Makefile is included
+NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
+CHECKFLAGS     += $(NOSTDINC_FLAGS)
 
-# Explicitly make _depend in subdirs containing multiple targets to prevent
-# parallel sub-makes creating .depend files simultaneously.
-depend dep:	$(TIMESTAMP_FILE) $(VERSION_FILE) \
-		$(obj)include/autoconf.mk \
-		$(obj)include/generated/generic-asm-offsets.h \
-		$(obj)include/generated/asm-offsets.h
-		for dir in $(SUBDIRS) $(CPUDIR) $(LDSCRIPT_MAKEFILE_DIR) ; do \
-			$(MAKE) -C $$dir _depend ; done
+# warn about C99 declaration after statement
+KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
 
-TAG_SUBDIRS = $(SUBDIRS)
-TAG_SUBDIRS += $(dir $(__LIBS))
-TAG_SUBDIRS += include
+# disable pointer signed / unsigned warnings in gcc 4.0
+KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign)
 
-FIND := find
-FINDFLAGS := -L
+# disable invalid "can't wrap" optimizations for signed / pointers
+KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
 
-checkstack:
-		$(CROSS_COMPILE)objdump -d $(obj)u-boot \
-			`$(FIND) $(obj) -name u-boot-spl -print` | \
-			perl $(src)tools/checkstack.pl $(ARCH)
-
-tags ctags:
-		ctags -w -o $(obj)ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
-						-name '*.[chS]' -print`
-
-etags:
-		etags -a -o $(obj)etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
-						-name '*.[chS]' -print`
-cscope:
-		$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
-						cscope.files
-		cscope -b -q -k
-
-SYSTEM_MAP = \
-		$(NM) $1 | \
-		grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
-		LC_ALL=C sort
-$(obj)System.map:	$(obj)u-boot
-		@$(call SYSTEM_MAP,$<) > $(obj)System.map
-
-checkthumb:
-	@if test $(call cc-version) -lt 0404; then \
-		echo -n '*** Your GCC does not produce working '; \
-		echo 'binaries in THUMB mode.'; \
-		echo '*** Your board is configured for THUMB mode.'; \
-		false; \
-	fi
+# conserve stack if available
+KBUILD_CFLAGS   += $(call cc-option,-fconserve-stack)
 
-# GCC 3.x is reported to have problems generating the type of relocation
-# that U-Boot wants.
-# See http://lists.denx.de/pipermail/u-boot/2012-September/135156.html
-checkgcc4:
-	@if test $(call cc-version) -lt 0400; then \
-		echo -n '*** Your GCC is too old, please upgrade to GCC 4.x or newer'; \
-		false; \
-	fi
+# use the deterministic mode of AR if available
+KBUILD_ARFLAGS := $(call ar-option,D)
+
+# check for 'asm goto'
+ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y)
+	KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
+endif
+
+# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
+KBUILD_CPPFLAGS += $(KCPPFLAGS)
+KBUILD_AFLAGS += $(KAFLAGS)
+KBUILD_CFLAGS += $(KCFLAGS)
+
+# Use --build-id when available.
+LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\
+			      $(call cc-ldoption, -Wl$(comma)--build-id,))
+KBUILD_LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
+LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)
+
+ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
+LDFLAGS_vmlinux	+= $(call ld-option, -X,)
+endif
+
+FINAL_LIBS := $(PLATFORM_LIBS)
+export FINAL_LIBS
+
+# Default kernel image to build when no specific target is given.
+# KBUILD_IMAGE may be overruled on the command line or
+# set in the environment
+# Also any assignments in arch/$(ARCH)/Makefile take precedence over
+# this default value
+export KBUILD_IMAGE ?= vmlinux
+
+#
+# INSTALL_PATH specifies where to place the updated kernel and system map
+# images. Default is /boot, but you can set it to other values
+export	INSTALL_PATH ?= /boot
 
 #
-# Auto-generate the autoconf.mk file (which is included by all makefiles)
+# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
+# relocations required by build roots.  This is not defined in the
+# makefile but the argument can be passed to make if needed.
 #
-# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
-# the dep file is only include in this top level makefile to determine when
-# to regenerate the autoconf.mk file.
-$(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h
-	@$(XECHO) Generating $@ ; \
-	set -e ; \
-	: Generate the dependancies ; \
-	$(CC) -x c -DDO_DEPS_ONLY -M $(CFLAGS) $(CPPFLAGS) \
-		-MQ $(obj)include/autoconf.mk include/common.h > $@
-
-$(obj)include/autoconf.mk: $(obj)include/config.h
-	@$(XECHO) Generating $@ ; \
-	set -e ; \
-	: Extract the config macros ; \
-	$(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
-		sed -n -f tools/scripts/define2mk.sed > [email protected] && \
-	mv [email protected] $@
-
-$(obj)include/generated/generic-asm-offsets.h:	$(obj)include/autoconf.mk.dep \
-	$(obj)lib/asm-offsets.s
-	@$(XECHO) Generating $@
-	tools/scripts/make-asm-offsets $(obj)lib/asm-offsets.s $@
-
-$(obj)lib/asm-offsets.s:	$(obj)include/autoconf.mk.dep \
-	$(src)lib/asm-offsets.c
-	@mkdir -p $(obj)lib
-	$(CC) -DDO_DEPS_ONLY \
-		$(CFLAGS) $(CFLAGS_$(BCURDIR)/$(@F)) $(CFLAGS_$(BCURDIR)) \
-		-o $@ $(src)lib/asm-offsets.c -c -S
-
-$(obj)include/generated/asm-offsets.h:	$(obj)include/autoconf.mk.dep \
-	$(obj)$(CPUDIR)/$(SOC)/asm-offsets.s
-	@$(XECHO) Generating $@
-	tools/scripts/make-asm-offsets $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s $@
-
-$(obj)$(CPUDIR)/$(SOC)/asm-offsets.s:	$(obj)include/autoconf.mk.dep
-	@mkdir -p $(obj)$(CPUDIR)/$(SOC)
-	if [ -f $(src)$(CPUDIR)/$(SOC)/asm-offsets.c ];then \
-		$(CC) -DDO_DEPS_ONLY \
-		$(CFLAGS) $(CFLAGS_$(BCURDIR)/$(@F)) $(CFLAGS_$(BCURDIR)) \
-			-o $@ $(src)$(CPUDIR)/$(SOC)/asm-offsets.c -c -S; \
-	else \
-		touch $@; \
-	fi
 
-#########################################################################
-else	# !config.mk
-all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
-$(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
-$(filter-out tools,$(SUBDIRS)) \
-updater depend dep tags ctags etags cscope $(obj)System.map:
-	@echo "System not configured - see README" >&2
-	@ exit 1
+MODLIB	= $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
+export MODLIB
+
+#
+#  INSTALL_MOD_STRIP, if defined, will cause modules to be
+#  stripped after they are installed.  If INSTALL_MOD_STRIP is '1', then
+#  the default option --strip-debug will be used.  Otherwise,
+#  INSTALL_MOD_STRIP value will be used as the options to the strip command.
+
+ifdef INSTALL_MOD_STRIP
+ifeq ($(INSTALL_MOD_STRIP),1)
+mod_strip_cmd = $(STRIP) --strip-debug
+else
+mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
+endif # INSTALL_MOD_STRIP=1
+else
+mod_strip_cmd = true
+endif # INSTALL_MOD_STRIP
+export mod_strip_cmd
 
-tools: $(VERSION_FILE) $(TIMESTAMP_FILE)
-	$(MAKE) -C $@ all
-endif	# config.mk
+
+ifdef CONFIG_MODULE_SIG_ALL
+MODSECKEY = ./signing_key.priv
+MODPUBKEY = ./signing_key.x509
+export MODPUBKEY
+mod_sign_cmd = perl $(srctree)/scripts/sign-file $(CONFIG_MODULE_SIG_HASH) $(MODSECKEY) $(MODPUBKEY)
+else
+mod_sign_cmd = true
+endif
+export mod_sign_cmd
+
+
+ifeq ($(KBUILD_EXTMOD),)
+#core-y		+= kernel/ mm/ fs/ ipc/ security/ crypto/ block/
+
+vmlinux-dirs	:= $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
+		     $(arch-y) $(arch-m) $(board-y) $(board-m) \
+		     $(disk-y) $(disk-m) $(fs-y) $(fs-m) \
+		     $(core-y) $(core-m) $(drivers-y) $(drivers-m) \
+		     $(net-y) $(net-m) $(libs-y) $(libs-m)))
+
+vmlinux-alldirs	:= $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \
+		     $(init-n) $(init-) \
+		     $(arch-y) $(arch-m)  $(board-y) $(board-m) \
+		     $(disk-y) $(disk-m) $(fs-y) $(fs-m) \
+		     $(core-n) $(core-) $(drivers-n) $(drivers-) \
+		     $(net-n)  $(net-)  $(libs-n)    $(libs-))))
+
+arch-y		:= $(patsubst %/, %/built-in.o, $(arch-y))
+board-y		:= $(patsubst %/, %/built-in.o, $(board-y))
+core-y		:= $(patsubst %/, %/built-in.o, $(core-y))
+disk-y		:= $(patsubst %/, %/built-in.o, $(disk-y))
+drivers-y	:= $(patsubst %/, %/built-in.o, $(drivers-y))
+fs-y		:= $(patsubst %/, %/built-in.o, $(fs-y))
+init-y		:= $(patsubst %/, %/built-in.o, $(init-y))
+net-y		:= $(patsubst %/, %/built-in.o, $(net-y))
+spl-y		:= $(patsubst %/, %/built-in.o, $(spl-y))
+
+libs-y		:= $(patsubst %/, %/built-in.o, $(libs-y))
+
+# Externally visible symbols (used by link-vmlinux.sh)
+export KBUILD_VMLINUX_INIT := $(head-y) $(init-y)
+export KBUILD_VMLINUX_MAIN := $(core-y) $(libs-y) $(drivers-y) $(net-y) \
+			      $(arch-y) $(board-y) $(disk-y) $(fs-y)
+export KBUILD_LDS          := arch/$(SRCARCH)/cpu/u-boot.lds
+export LDFLAGS_vmlinux
+
+vmlinux-deps := $(KBUILD_LDS) $(KBUILD_VMLINUX_INIT) $(KBUILD_VMLINUX_MAIN)
+
+# Final link of vmlinux
+      cmd_link-vmlinux = $(CONFIG_SHELL) $< $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux)
+quiet_cmd_link-vmlinux = LINK    $@
+
+# Include targets which we want to
+# execute if the rest of the kernel build went well.
+vmlinux: scripts/link-vmlinux.sh $(vmlinux-deps) FORCE
+ifdef CONFIG_HEADERS_CHECK
+	$(Q)$(MAKE) -f $(MAKEFILE_NAME) headers_check
+endif
+ifdef CONFIG_SAMPLES
+	$(Q)$(MAKE) $(build)=samples
+endif
+ifdef CONFIG_BUILD_DOCSRC
+	$(Q)$(MAKE) $(build)=Documentation
+endif
+	+$(call if_changed,link-vmlinux)
+
+spl/u-boot:
+	$(Q)echo "SPL not yet supported"
+
+# The actual objects are generated when descending,
+# make sure no implicit rule kicks in
+$(sort $(vmlinux-deps)): $(vmlinux-dirs) ;
+
+# Handle descending into subdirectories listed in $(vmlinux-dirs)
+# Preset locale variables to speed up the build process. Limit locale
+# tweaks to this spot to avoid wrong language settings when running
+# make menuconfig etc.
+# Error messages still appears in the original language
+
+PHONY += $(vmlinux-dirs)
+$(vmlinux-dirs): prepare scripts
+	$(Q)$(MAKE) $(build)=$@
+
+# Store (new) KERNELRELASE string in include/config/kernel.release
+include/config/kernel.release: include/config/auto.conf FORCE
+	$(Q)rm -f $@
+	$(Q)echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" > $@
+
+
+# Things we need to do before we recursively start building the kernel
+# or the modules are listed in "prepare".
+# A multi level approach is used. prepareN is processed before prepareN-1.
+# archprepare is used in arch Makefiles and when processed asm symlink,
+# version.h and scripts_basic is processed / created.
+
+# Listed in dependency order
+PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
+
+# prepare3 is used to check if we are building in a separate output directory,
+# and if so do:
+# 1) Check that make has not been executed in the kernel src $(srctree)
+prepare3: include/config/kernel.release $(TIMESTAMP_FILE) $(VERSION_FILE)
+ifneq ($(KBUILD_SRC),)
+	@$(kecho) '  Using $(srctree) as source for kernel'
+	$(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
+		echo >&2 "  $(srctree) is not clean, please run 'make mrproper'"; \
+		echo >&2 "  in the '$(srctree)' directory.";\
+		/bin/false; \
+	fi;
+endif
+
+# prepare2 creates a makefile if using a separate output directory
+prepare2: prepare3 outputmakefile asm-generic
+
+prepare1: prepare2 $(version_h) include/generated/utsrelease.h \
+                   include/config/auto.conf
+	$(cmd_crmodverdir)
+
+archprepare: archheaders archscripts prepare1 scripts_basic
+
+prepare0: archprepare FORCE
+	$(Q)$(MAKE) $(build)=.
+
+# All the preparing..
+prepare: prepare0
+
+# Generate some files
+# ---------------------------------------------------------------------------
+
+# KERNELRELEASE can change from a few different places, meaning version.h
+# needs to be updated, so this check is forced on all builds
 
 $(VERSION_FILE):
 		@mkdir -p $(dir $(VERSION_FILE))
@@ -770,131 +931,591 @@ $(TIMESTAMP_FILE):
 		@LC_ALL=C date +'#define U_BOOT_TIME "%T"' >> [email protected]
 		@cmp -s $@ [email protected] && rm -f [email protected] || mv -f [email protected] $@
 
-easylogo env gdb:
-	$(MAKE) -C tools/$@ all MTD_VERSION=${MTD_VERSION}
-gdbtools: gdb
+uts_len := 64
+define filechk_utsrelease.h
+	if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
+	  echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2;    \
+	  exit 1;                                                         \
+	fi;                                                               \
+	(echo \#define UTS_RELEASE \"$(KERNELRELEASE)\";)
+endef
+
+define filechk_version.h
+	(echo \#define LINUX_VERSION_CODE $(shell                         \
+	expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \
+	echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
+endef
 
-xmldocs pdfdocs psdocs htmldocs mandocs: tools/kernel-doc/docproc
-	$(MAKE) U_BOOT_VERSION=$(U_BOOT_VERSION) -C doc/DocBook/ $@
+$(version_h): $(MAKEFILE_NAME) FORCE
+	$(call filechk,version.h)
 
-tools-all: easylogo env gdb $(VERSION_FILE) $(TIMESTAMP_FILE)
-	$(MAKE) -C tools HOST_TOOLS_ALL=y
+include/generated/utsrelease.h: include/config/kernel.release FORCE
+	$(call filechk,utsrelease.h)
 
-.PHONY : CHANGELOG
-CHANGELOG:
-	git log --no-merges U-Boot-1_1_5.. | \
-	unexpand -a | sed -e 's/\s\s*$$//' > $@
+PHONY += headerdep
+headerdep:
+	$(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \
+	$(srctree)/scripts/headerdep.pl -I$(srctree)/include
 
-include/license.h: tools/bin2header COPYING
-	cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
-#########################################################################
+# ---------------------------------------------------------------------------
 
-unconfig:
-	@rm -f $(obj)include/config.h $(obj)include/config.mk \
-		$(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
-		$(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep
+PHONY += depend dep
+depend dep:
+	@echo '*** Warning: make $@ is unnecessary now.'
 
-%_config::	unconfig
-	@$(MKCONFIG) -A $(@:_config=)
+# ---------------------------------------------------------------------------
+# Firmware install
+INSTALL_FW_PATH=$(INSTALL_MOD_PATH)/lib/firmware
+export INSTALL_FW_PATH
 
-sinclude $(obj).boards.depend
-$(obj).boards.depend:	boards.cfg
-	@awk '(NF && $$1 !~ /^#/) { print $$1 ": " $$1 "_config; $$(MAKE)" }' $< > $@
+PHONY += firmware_install
+firmware_install: FORCE
+	@mkdir -p $(objtree)/firmware
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_install
 
+# ---------------------------------------------------------------------------
+# Kernel headers
+
+#Default location for installed headers
+export INSTALL_HDR_PATH = $(objtree)/usr
+
+hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
+
+# If we do an all arch process set dst to asm-$(hdr-arch)
+hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)
+
+PHONY += archheaders
+archheaders:
+
+PHONY += archscripts
+archscripts:
+
+PHONY += __headers
+__headers: $(version_h) scripts_basic asm-generic archheaders archscripts FORCE
+	$(Q)$(MAKE) $(build)=scripts build_unifdef
+
+PHONY += headers_install_all
+headers_install_all:
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh install
+
+PHONY += headers_install
+headers_install: __headers
+	$(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/uapi/asm/Kbuild),, \
+	  $(error Headers not exportable for the $(SRCARCH) architecture))
+	$(Q)$(MAKE) $(hdr-inst)=include/uapi
+	$(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst)
+
+PHONY += headers_check_all
+headers_check_all: headers_install_all
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh check
+
+PHONY += headers_check
+headers_check: headers_install
+	$(Q)$(MAKE) $(hdr-inst)=include/uapi HDRCHECK=1
+	$(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst) HDRCHECK=1
+
+# ---------------------------------------------------------------------------
+# Modules
+
+ifdef CONFIG_MODULES
+
+# By default, build modules as well
+
+all: modules
+
+#	Build modules
 #
-# Functions to generate common board directory names
+#	A module can be listed more than once in obj-m resulting in
+#	duplicate lines in modules.order files.  Those are removed
+#	using awk while concatenating to the final file.
+
+PHONY += modules
+modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
+	$(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
+	@$(kecho) '  Building modules, stage 2.';
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild
+
+modules.builtin: $(vmlinux-dirs:%=%/modules.builtin)
+	$(Q)$(AWK) '!x[$$0]++' $^ > $(objtree)/modules.builtin
+
+%/modules.builtin: include/config/auto.conf
+	$(Q)$(MAKE) $(modbuiltin)=$*
+
+
+# Target to prepare building external modules
+PHONY += modules_prepare
+modules_prepare: prepare scripts
+
+# Target to install modules
+PHONY += modules_install
+modules_install: _modinst_ _modinst_post
+
+PHONY += _modinst_
+_modinst_:
+	@rm -rf $(MODLIB)/kernel
+	@rm -f $(MODLIB)/source
+	@mkdir -p $(MODLIB)/kernel
+	@ln -s $(srctree) $(MODLIB)/source
+	@if [ ! $(objtree) -ef  $(MODLIB)/build ]; then \
+		rm -f $(MODLIB)/build ; \
+		ln -s $(objtree) $(MODLIB)/build ; \
+	fi
+	@cp -f $(objtree)/modules.order $(MODLIB)/
+	@cp -f $(objtree)/modules.builtin $(MODLIB)/
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
+
+# This depmod is only for convenience to give the initial
+# boot a modules.dep even before / is mounted read-write.  However the
+# boot script depmod is the master version.
+PHONY += _modinst_post
+_modinst_post: _modinst_
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modinst
+	$(call cmd,depmod)
+
+ifeq ($(CONFIG_MODULE_SIG), y)
+PHONY += modules_sign
+modules_sign:
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modsign
+endif
+
+else # CONFIG_MODULES
+
+# Modules not configured
+# ---------------------------------------------------------------------------
+
+modules modules_install: FORCE
+	@echo >&2
+	@echo >&2 "The present kernel configuration has modules disabled."
+	@echo >&2 "Type 'make config' and enable loadable module support."
+	@echo >&2 "Then build a kernel with module support enabled."
+	@echo >&2
+	@exit 1
+
+endif # CONFIG_MODULES
+
+###
+# Cleaning is done on three levels.
+# make clean     Delete most generated files
+#                Leave enough to build external modules
+# make mrproper  Delete the current configuration, and all generated files
+# make distclean Remove editor backup files, patch leftover files and the like
+
+# Directories & files removed with 'make clean'
+CLEAN_DIRS  += $(MODVERDIR)
+
+# Directories & files removed with 'make mrproper'
+MRPROPER_DIRS  += include/config usr/include include/generated          \
+                  arch/*/include/generated
+MRPROPER_FILES += .config .config.old .version .old_version $(version_h) \
+		  Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
+		  signing_key.priv signing_key.x509 x509.genkey		\
+		  extra_certificates signing_key.x509.keyid		\
+		  signing_key.x509.signer
+
+# clean - Delete most, but leave enough to build external modules
 #
-lcname	= $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/')
-ucname	= $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')
-
-#########################################################################
-#########################################################################
-
-clean:
-	@rm -f $(obj)examples/standalone/82559_eeprom			  \
-	       $(obj)examples/standalone/atmel_df_pow2			  \
-	       $(obj)examples/standalone/eepro100_eeprom		  \
-	       $(obj)examples/standalone/hello_world			  \
-	       $(obj)examples/standalone/interrupt			  \
-	       $(obj)examples/standalone/mem_to_mem_idma2intr		  \
-	       $(obj)examples/standalone/sched				  \
-	       $(obj)examples/standalone/smc911{11,x}_eeprom		  \
-	       $(obj)examples/standalone/test_burst			  \
-	       $(obj)examples/standalone/timer
-	@rm -f $(obj)examples/api/demo{,.bin}
-	@rm -f $(obj)tools/bmp_logo	   $(obj)tools/easylogo/easylogo  \
-	       $(obj)tools/env/{fw_printenv,fw_setenv}			  \
-	       $(obj)tools/envcrc					  \
-	       $(obj)tools/gdb/{astest,gdbcont,gdbsend}			  \
-	       $(obj)tools/gen_eth_addr    $(obj)tools/img2srec		  \
-	       $(obj)tools/mk{env,}image   $(obj)tools/mpc86x_clk	  \
-	       $(obj)tools/mk{smdk5250,}spl				  \
-	       $(obj)tools/mxsboot					  \
-	       $(obj)tools/ncb		   $(obj)tools/ubsha1		  \
-	       $(obj)tools/kernel-doc/docproc
-	@rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image}	  \
-	       $(obj)board/matrix_vision/*/bootscript.img		  \
-	       $(obj)board/voiceblue/eeprom 				  \
-	       $(obj)u-boot.lds						  \
-	       $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs]	  \
-	       $(obj)arch/blackfin/cpu/init.{lds,elf}
-	@rm -f $(obj)include/bmp_logo.h
-	@rm -f $(obj)include/bmp_logo_data.h
-	@rm -f $(obj)lib/asm-offsets.s
-	@rm -f $(obj)include/generated/asm-offsets.h
-	@rm -f $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s
-	@rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
-	@$(MAKE) -s -C doc/DocBook/ cleandocs
-	@find $(OBJTREE) -type f \
-		\( -name 'core' -o -name '*.bak' -o -name '*~' -o -name '*.su' \
-		-o -name '*.o'	-o -name '*.a' -o -name '*.exe' \
-		-o -name '*.cfgtmp' \) -print \
-		| xargs rm -f
-
-# Removes everything not needed for testing u-boot
-tidy:	clean
-	@find $(OBJTREE) -type f \( -name '*.depend*' \) -print | xargs rm -f
-
-clobber:	tidy
-	@find $(OBJTREE) -type f \( -name '*.srec' \
-		-o -name '*.bin' -o -name u-boot.img \) \
-		-print0 | xargs -0 rm -f
-	@rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
-		$(obj)cscope.* $(obj)*.*~
-	@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL-y)
-	@rm -f $(obj)u-boot.kwb
-	@rm -f $(obj)u-boot.pbl
-	@rm -f $(obj)u-boot.imx
-	@rm -f $(obj)u-boot-with-spl.imx
-	@rm -f $(obj)u-boot-with-nand-spl.imx
-	@rm -f $(obj)u-boot.ubl
-	@rm -f $(obj)u-boot.ais
-	@rm -f $(obj)u-boot.dtb
-	@rm -f $(obj)u-boot.sb
-	@rm -f $(obj)u-boot.spr
-	@rm -f $(obj)nand_spl/{u-boot.{lds,lst},System.map}
-	@rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map}
-	@rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.map}
-	@rm -f $(obj)spl/u-boot-spl.lds
-	@rm -f $(obj)MLO MLO.byteswap
-	@rm -f $(obj)SPL
-	@rm -f $(obj)tools/xway-swap-bytes
-	@rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
-	@rm -f $(obj)arch/powerpc/cpu/mpc83xx/ddr-gen?.c
-	@rm -fr $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
-	@rm -fr $(obj)include/generated
-	@[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
-	@rm -f $(obj)dts/*.tmp
-	@rm -f $(obj)spl/u-boot-spl{,-pad}.ais
-
-mrproper \
-distclean:	clobber unconfig
-ifneq ($(OBJTREE),$(SRCTREE))
-	rm -rf $(obj)*
-endif
-
-backup:
-	F=`basename $(TOPDIR)` ; cd .. ; \
-	gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
-
-#########################################################################
+clean: rm-dirs  := $(CLEAN_DIRS)
+clean: rm-files := $(CLEAN_FILES)
+clean-dirs      := $(addprefix _clean_, . $(vmlinux-alldirs) doc)
+
+PHONY += $(clean-dirs) clean archclean vmlinuxclean
+$(clean-dirs):
+	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
+
+vmlinuxclean:
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean
+
+clean: archclean vmlinuxclean
+
+# mrproper - Delete all generated files, including .config
+#
+mrproper: rm-dirs  := $(wildcard $(MRPROPER_DIRS))
+mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
+mrproper-dirs      := $(addprefix _mrproper_,scripts)
+
+PHONY += $(mrproper-dirs) mrproper archmrproper
+$(mrproper-dirs):
+	$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
+
+mrproper: clean archmrproper $(mrproper-dirs)
+	$(call cmd,rmdirs)
+	$(call cmd,rmfiles)
+
+# distclean
+#
+PHONY += distclean
+
+distclean: mrproper
+	@find $(srctree) $(RCS_FIND_IGNORE) \
+		\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
+		-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
+		-o -name '.*.rej' \
+		-o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
+		-type f -print | xargs rm -f
+
+
+# Packaging of the kernel to various formats
+# ---------------------------------------------------------------------------
+# rpm target kept for backward compatibility
+package-dir	:= $(srctree)/scripts/package
+
+%src-pkg: FORCE
+	$(Q)$(MAKE) $(build)=$(package-dir) $@
+%pkg: include/config/kernel.release FORCE
+	$(Q)$(MAKE) $(build)=$(package-dir) $@
+rpm: include/config/kernel.release FORCE
+	$(Q)$(MAKE) $(build)=$(package-dir) $@
+
+
+# Brief documentation of the typical targets used
+# ---------------------------------------------------------------------------
+
+boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig)
+boards := $(notdir $(boards))
+board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig))
+board-dirs := $(sort $(notdir $(board-dirs:/=)))
+
+help:
+	@echo  'Cleaning targets:'
+	@echo  '  clean		  - Remove most generated files but keep the config and'
+	@echo  '                    enough build support to build external modules'
+	@echo  '  mrproper	  - Remove all generated files + config + various backup files'
+	@echo  '  distclean	  - mrproper + remove editor backup and patch files'
+	@echo  ''
+	@echo  'Configuration targets:'
+	@$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
+	@echo  ''
+	@echo  'Other generic targets:'
+	@echo  '  all		  - Build all targets marked with [*]'
+	@echo  '* vmlinux	  - Build the bare kernel'
+	@echo  '* modules	  - Build all modules'
+	@echo  '  modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
+	@echo  '  firmware_install- Install all firmware to INSTALL_FW_PATH'
+	@echo  '                    (default: $$(INSTALL_MOD_PATH)/lib/firmware)'
+	@echo  '  dir/            - Build all files in dir and below'
+	@echo  '  dir/file.[oisS] - Build specified target only'
+	@echo  '  dir/file.lst    - Build specified mixed source/assembly target only'
+	@echo  '                    (requires a recent binutils and recent build (System.map))'
+	@echo  '  dir/file.ko     - Build module including final link'
+	@echo  '  modules_prepare - Set up for building external modules'
+	@echo  '  tags/TAGS	  - Generate tags file for editors'
+	@echo  '  cscope	  - Generate cscope index'
+	@echo  '  gtags           - Generate GNU GLOBAL index'
+	@echo  '  kernelrelease	  - Output the release version string'
+	@echo  '  kernelversion	  - Output the version stored in Makefile'
+	@echo  '  headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
+	 echo  '                    (default: $(INSTALL_HDR_PATH))'; \
+	 echo  ''
+	@echo  'Static analysers'
+	@echo  '  checkstack      - Generate a list of stack hogs'
+	@echo  '  namespacecheck  - Name space analysis on compiled kernel'
+	@echo  '  versioncheck    - Sanity check on version.h usage'
+	@echo  '  includecheck    - Check for duplicate included header files'
+	@echo  '  export_report   - List the usages of all exported symbols'
+	@echo  '  headers_check   - Sanity check on exported headers'
+	@echo  '  headerdep       - Detect inclusion cycles in headers'
+	@$(MAKE) -f $(srctree)/scripts/Makefile.help checker-help
+	@echo  ''
+	@echo  'Kernel packaging:'
+	@$(MAKE) $(build)=$(package-dir) help
+	@echo  ''
+	@echo  'Documentation targets:'
+	@$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp
+	@echo  ''
+	@echo  'Architecture specific targets ($(SRCARCH)):'
+	@$(if $(archhelp),$(archhelp),\
+		echo '  No architecture specific help defined for $(SRCARCH)')
+	@echo  ''
+	@$(if $(boards), \
+		$(foreach b, $(boards), \
+		printf "  %-24s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \
+		echo '')
+	@$(if $(board-dirs), \
+		$(foreach b, $(board-dirs), \
+		printf "  %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \
+		printf "  %-16s - Show all of the above\\n" help-boards; \
+		echo '')
+
+	@echo  '  make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
+	@echo  '  make V=2   [targets] 2 => give reason for rebuild of target'
+	@echo  '  make O=dir [targets] Locate all output files in "dir", including .config'
+	@echo  '  make C=1   [targets] Check all c source with $$CHECK (sparse by default)'
+	@echo  '  make C=2   [targets] Force check of all c source with $$CHECK'
+	@echo  '  make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
+	@echo  '  make W=n   [targets] Enable extra gcc checks, n=1,2,3 where'
+	@echo  '		1: warnings which may be relevant and do not occur too often'
+	@echo  '		2: warnings which occur quite often but may still be relevant'
+	@echo  '		3: more obscure warnings, can most likely be ignored'
+	@echo  '		Multiple levels can be combined with W=12 or W=123'
+	@echo  ''
+	@echo  'Execute "make" or "make all" to build all targets marked with [*] '
+	@echo  'For further info see the ./README file'
+
+
+help-board-dirs := $(addprefix help-,$(board-dirs))
+
+help-boards: $(help-board-dirs)
+
+boards-per-dir = $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig))
+
+$(help-board-dirs): help-%:
+	@echo  'Architecture specific targets ($(SRCARCH) $*):'
+	@$(if $(boards-per-dir), \
+		$(foreach b, $(boards-per-dir), \
+		printf "  %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \
+		echo '')
+
+
+# Documentation targets
+# ---------------------------------------------------------------------------
+%docs: scripts_basic FORCE
+	$(Q)$(MAKE) $(build)=scripts build_docproc
+	$(Q)$(MAKE) $(build)=Documentation/DocBook $@
+
+else # KBUILD_EXTMOD
+
+###
+# External module support.
+# When building external modules the kernel used as basis is considered
+# read-only, and no consistency checks are made and the make
+# system is not used on the basis kernel. If updates are required
+# in the basis kernel ordinary make commands (without M=...) must
+# be used.
+#
+# The following are the only valid targets when building external
+# modules.
+# make M=dir clean     Delete all automatically generated files
+# make M=dir modules   Make all modules in specified dir
+# make M=dir	       Same as 'make M=dir modules'
+# make M=dir modules_install
+#                      Install the modules built in the module directory
+#                      Assumes install directory is already created
+
+# We are always building modules
+KBUILD_MODULES := 1
+PHONY += crmodverdir
+crmodverdir:
+	$(cmd_crmodverdir)
+
+PHONY += $(objtree)/Module.symvers
+$(objtree)/Module.symvers:
+	@test -e $(objtree)/Module.symvers || ( \
+	echo; \
+	echo "  WARNING: Symbol version dump $(objtree)/Module.symvers"; \
+	echo "           is missing; modules will have no dependencies and modversions."; \
+	echo )
+
+module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
+PHONY += $(module-dirs) modules
+$(module-dirs): crmodverdir $(objtree)/Module.symvers
+	$(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
+
+modules: $(module-dirs)
+	@$(kecho) '  Building modules, stage 2.';
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+
+PHONY += modules_install
+modules_install: _emodinst_ _emodinst_post
+
+install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
+PHONY += _emodinst_
+_emodinst_:
+	$(Q)mkdir -p $(MODLIB)/$(install-dir)
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
+
+PHONY += _emodinst_post
+_emodinst_post: _emodinst_
+	$(call cmd,depmod)
+
+clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))
+
+PHONY += $(clean-dirs) clean
+$(clean-dirs):
+	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
+
+clean:	rm-dirs := $(MODVERDIR)
+clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
+
+help:
+	@echo  '  Building external modules.'
+	@echo  '  Syntax: make -C path/to/kernel/src M=$$PWD target'
+	@echo  ''
+	@echo  '  modules         - default target, build the module(s)'
+	@echo  '  modules_install - install the module'
+	@echo  '  clean           - remove generated files in module directory only'
+	@echo  ''
+
+# Dummies...
+PHONY += prepare scripts
+prepare: ;
+scripts: ;
+endif # KBUILD_EXTMOD
+
+clean: $(clean-dirs)
+	$(call cmd,rmdirs)
+	$(call cmd,rmfiles)
+	@find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
+		\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
+		-o -name '*.ko.*' \
+		-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
+		-o -name '*.symtypes' -o -name 'modules.order' \
+		-o -name modules.builtin -o -name '.tmp_*.o.*' \
+		-o -name '*.gcno' \) -type f -print | xargs rm -f
+
+# Generate tags for editors
+# ---------------------------------------------------------------------------
+quiet_cmd_tags = GEN     $@
+      cmd_tags = $(CONFIG_SHELL) $(srctree)/scripts/tags.sh $@
+
+tags TAGS cscope gtags: FORCE
+	$(call cmd,tags)
+
+# Scripts to check various things for consistency
+# ---------------------------------------------------------------------------
+
+PHONY += includecheck versioncheck coccicheck namespacecheck export_report
+
+includecheck:
+	find $(srctree)/* $(RCS_FIND_IGNORE) \
+		-name '*.[hcS]' -type f -print | sort \
+		| xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl
+
+versioncheck:
+	find $(srctree)/* $(RCS_FIND_IGNORE) \
+		-name '*.[hcS]' -type f -print | sort \
+		| xargs $(PERL) -w $(srctree)/scripts/checkversion.pl
+
+coccicheck:
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
+
+namespacecheck:
+	$(PERL) $(srctree)/scripts/namespace.pl
+
+export_report:
+	$(PERL) $(srctree)/scripts/export_report.pl
+
+endif #ifeq ($(config-targets),1)
+endif #ifeq ($(mixed-targets),1)
+
+PHONY += checkstack kernelrelease kernelversion
+
+# UML needs a little special treatment here.  It wants to use the host
+# toolchain, so needs $(SUBARCH) passed to checkstack.pl.  Everyone
+# else wants $(ARCH), including people doing cross-builds, which means
+# that $(SUBARCH) doesn't work here.
+ifeq ($(ARCH), um)
+CHECKSTACK_ARCH := $(SUBARCH)
+else
+CHECKSTACK_ARCH := $(ARCH)
+endif
+checkstack:
+	$(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
+	$(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
+
+kernelrelease:
+	@echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
+
+kernelversion:
+	@echo $(KERNELVERSION)
+
+# Clear a bunch of variables before executing the submake
+tools/: FORCE
+	$(Q)mkdir -p $(objtree)/tools
+	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS= O=$(objtree) subdir=tools -C $(src)/tools/
+
+tools/%: FORCE
+	$(Q)mkdir -p $(objtree)/tools
+	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS= O=$(objtree) subdir=tools -C $(src)/tools/ $*
+
+# Single targets
+# ---------------------------------------------------------------------------
+# Single targets are compatible with:
+# - build with mixed source and output
+# - build with separate output dir 'make O=...'
+# - external modules
+#
+#  target-dir => where to store outputfile
+#  build-dir  => directory in kernel source tree to use
+
+ifeq ($(KBUILD_EXTMOD),)
+        build-dir  = $(patsubst %/,%,$(dir $@))
+        target-dir = $(dir $@)
+else
+        zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
+        build-dir  = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
+        target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
+endif
+
+%.s: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.i: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.o: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.lst: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.s: %.S prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.o: %.S prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.symtypes: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+
+# Modules
+/: prepare scripts FORCE
+	$(cmd_crmodverdir)
+	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+	$(build)=$(build-dir)
+%/: prepare scripts FORCE
+	$(cmd_crmodverdir)
+	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+	$(build)=$(build-dir)
+%.ko: prepare scripts FORCE
+	$(cmd_crmodverdir)
+	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1)   \
+	$(build)=$(build-dir) $(@:.ko=.o)
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+
+# FIXME Should go into a make.lib or something
+# ===========================================================================
+
+quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN   $(wildcard $(rm-dirs)))
+      cmd_rmdirs = rm -rf $(rm-dirs)
+
+quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN   $(wildcard $(rm-files)))
+      cmd_rmfiles = rm -f $(rm-files)
+
+# Run depmod only if we have System.map and depmod is executable
+quiet_cmd_depmod = DEPMOD  $(KERNELRELEASE)
+      cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
+                   $(KERNELRELEASE)
+
+# Create temporary dir for module support files
+# clean it up only when building all modules
+cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \
+                  $(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*)
+
+# read all saved command lines
+
+targets := $(wildcard $(sort $(targets)))
+cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
+
+ifneq ($(cmd_files),)
+  $(cmd_files): ;	# Do not try to update included dependency files
+  include $(cmd_files)
+endif
+
+# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
+# Usage:
+# $(Q)$(MAKE) $(clean)=dir
+clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
+
+endif	# skip-makefile
+
+PHONY += FORCE
+FORCE:
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable so we can use it in if_changed and friends.
+.PHONY: $(PHONY)
Makefile.kbuild deleted +0 -1521

731 lines not on this page · raw message

Makefile.legacy new file +900 -0

900 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
1.8.2.1

Part of the diff is not shown here. View the raw message.