config: consolidate CONFIG_SYS_HZ definition
Subsystems (9)
PATCH 1/1 config: consolidate CONFIG_SYS_HZ definition
From: Rob Herring <[email protected]>
According to the README, CONFIG_SYS_HZ must be 1000 and most platforms follow that. Remove CONFIG_SYS_HZ from all these platforms and provide a default definition.
The platforms which use a value other than 1000 are untouched.
--- arch/arm/include/asm/arch-lpc32xx/config.h | 3 --- include/config_fallbacks.h | 4 ++++ include/configs/A3000.h | 1 - include/configs/AR405.h | 2 -- include/configs/ASH405.h | 2 -- include/configs/Adder.h | 2 -- include/configs/B4860QDS.h | 1 - include/configs/BC3450.h | 2 -- include/configs/BSC9131RDB.h | 1 - include/configs/BSC9132QDS.h | 1 - include/configs/C29XPCIE.h | 1 - include/configs/CATcenter.h | 2 -- include/configs/CMS700.h | 2 -- include/configs/CPC45.h | 1 - include/configs/CPCI2DP.h | 2 -- include/configs/CPCI405.h | 2 -- include/configs/CPCI4052.h | 2 -- include/configs/CPCI405AB.h | 2 -- include/configs/CPCI405DT.h | 2 -- include/configs/CPCI750.h | 1 - include/configs/CPCIISER4.h | 2 -- include/configs/CPU87.h | 2 -- include/configs/CU824.h | 1 - include/configs/DB64360.h | 1 - include/configs/DB64460.h | 1 - include/configs/DP405.h | 2 -- include/configs/DU405.h | 2 -- include/configs/DU440.h | 2 -- include/configs/ELPPC.h | 2 -- include/configs/ELPT860.h | 2 -- include/configs/EP88x.h | 2 -- include/configs/FLAGADM.h | 2 -- include/configs/G2000.h | 2 -- include/configs/GEN860T.h | 5 ----- include/configs/HIDDEN_DRAGON.h | 1 - include/configs/HUB405.h | 2 -- include/configs/HWW1U1A.h | 2 -- include/configs/IPHASE4539.h | 2 -- include/configs/ISPAN.h | 2 -- include/configs/IceCube.h | 2 -- include/configs/JSE.h | 2 -- include/configs/KUP4K.h | 2 -- include/configs/KUP4X.h | 2 -- include/configs/M5208EVBE.h | 1 - include/configs/M52277EVB.h | 2 -- include/configs/M5235EVB.h | 1 - include/configs/M5249EVB.h | 2 -- include/configs/M5253DEMO.h | 2 -- include/configs/M5253EVBE.h | 2 -- include/configs/M5272C3.h | 1 - include/configs/M5275EVB.h | 1 - include/configs/M5282EVB.h | 1 - include/configs/M53017EVB.h | 1 - include/configs/M5329EVB.h | 1 - include/configs/M5373EVB.h | 1 - include/configs/M54418TWR.h | 2 -- include/configs/M54451EVB.h | 2 -- include/configs/M54455EVB.h | 2 -- include/configs/M5475EVB.h | 1 - include/configs/M5485EVB.h | 1 - include/configs/MBX.h | 2 -- include/configs/MERGERBOX.h | 1 - include/configs/MHPC.h | 2 -- include/configs/MIP405.h | 2 -- include/configs/MOUSSE.h | 1 - include/configs/MPC8260ADS.h | 2 -- include/configs/MPC8266ADS.h | 2 -- include/configs/MPC8308RDB.h | 1 - include/configs/MPC8313ERDB.h | 1 - include/configs/MPC8315ERDB.h | 1 - include/configs/MPC8323ERDB.h | 1 - include/configs/MPC832XEMDS.h | 1 - include/configs/MPC8349EMDS.h | 1 - include/configs/MPC8349ITX.h | 1 - include/configs/MPC8360EMDS.h | 1 - include/configs/MPC8360ERDK.h | 1 - include/configs/MPC837XEMDS.h | 1 - include/configs/MPC837XERDB.h | 1 - include/configs/MPC8536DS.h | 1 - include/configs/MPC8540ADS.h | 1 - include/configs/MPC8541CDS.h | 1 - include/configs/MPC8544DS.h | 1 - include/configs/MPC8548CDS.h | 1 - include/configs/MPC8555CDS.h | 1 - include/configs/MPC8560ADS.h | 1 - include/configs/MPC8568MDS.h | 1 - include/configs/MPC8569MDS.h | 1 - include/configs/MPC8572DS.h | 1 - include/configs/MPC8610HPCD.h | 1 - include/configs/MPC8641HPCN.h | 1 - include/configs/MUSENKI.h | 1 - include/configs/MVBC_P.h | 2 -- include/configs/MVBLM7.h | 1 - include/configs/MVSMR.h | 2 -- include/configs/MigoR.h | 1 - include/configs/NX823.h | 2 -- include/configs/OCRTC.h | 2 -- include/configs/ORSG.h | 2 -- include/configs/P1010RDB.h | 1 - include/configs/P1022DS.h | 1 - include/configs/P1023RDB.h | 1 - include/configs/P1023RDS.h | 1 - include/configs/P1_P2_RDB.h | 1 - include/configs/P2020COME.h | 1 - include/configs/P2020DS.h | 1 - include/configs/P2041RDB.h | 1 - include/configs/PCI405.h | 2 -- include/configs/PCI5441.h | 1 - include/configs/PIP405.h | 2 -- include/configs/PK1C20.h | 1 - include/configs/PLU405.h | 2 -- include/configs/PM520.h | 2 -- include/configs/PM828.h | 2 -- include/configs/PMC405.h | 2 -- include/configs/PMC405DE.h | 2 -- include/configs/PMC440.h | 2 -- include/configs/PN62.h | 1 - include/configs/PPChameleonEVB.h | 2 -- include/configs/QS823.h | 2 -- include/configs/QS850.h | 2 -- include/configs/QS860T.h | 2 -- include/configs/RPXlite_DW.h | 2 -- include/configs/RPXsuper.h | 1 - include/configs/Rattler.h | 2 -- include/configs/SIMPC8313.h | 1 - include/configs/Sandpoint8240.h | 1 - include/configs/Sandpoint8245.h | 1 - include/configs/TASREG.h | 2 -- include/configs/TB5200.h | 2 -- include/configs/TK885D.h | 2 -- include/configs/TOP5200.h | 2 -- include/configs/TOP860.h | 1 - include/configs/TQM5200.h | 2 -- include/configs/TQM834x.h | 1 - include/configs/TQM866M.h | 2 -- include/configs/TQM885D.h | 2 -- include/configs/Total5200.h | 2 -- include/configs/VCMA9.h | 1 - include/configs/VOH405.h | 2 -- include/configs/VOM405.h | 2 -- include/configs/VoVPN-GW.h | 1 - include/configs/W7OLMC.h | 2 -- include/configs/W7OLMG.h | 2 -- include/configs/WUH405.h | 2 -- include/configs/ZPC1900.h | 2 -- include/configs/ZUMA.h | 2 -- include/configs/a320evb.h | 1 - include/configs/a3m071.h | 1 - include/configs/a4m072.h | 2 -- include/configs/ac14xx.h | 3 --- include/configs/actux1.h | 1 - include/configs/actux2.h | 1 - include/configs/actux3.h | 1 - include/configs/actux4.h | 1 - include/configs/adp-ag101.h | 6 ------ include/configs/adp-ag101p.h | 6 ------ include/configs/adp-ag102.h | 6 ------ include/configs/aev.h | 2 -- include/configs/afeb9260.h | 1 - include/configs/alpr.h | 2 -- include/configs/am3517_crane.h | 1 - include/configs/am3517_evm.h | 1 - include/configs/am43xx_evm.h | 1 - include/configs/amcc-common.h | 2 -- include/configs/ap325rxa.h | 1 - include/configs/ap_sh4a_4a.h | 1 - include/configs/aria.h | 2 -- include/configs/armadillo-800eva.h | 1 - include/configs/astro_mcf5373l.h | 2 -- include/configs/at91rm9200ek.h | 1 - include/configs/at91sam9260ek.h | 1 - include/configs/at91sam9261ek.h | 1 - include/configs/at91sam9263ek.h | 1 - include/configs/at91sam9m10g45ek.h | 1 - include/configs/at91sam9n12ek.h | 1 - include/configs/at91sam9rlek.h | 1 - include/configs/at91sam9x5ek.h | 1 - include/configs/atngw100.h | 2 -- include/configs/atngw100mkii.h | 6 ------ include/configs/atstk1002.h | 6 ------ include/configs/atstk1003.h | 6 ------ include/configs/atstk1004.h | 6 ------ include/configs/atstk1006.h | 5 ----- include/configs/calimain.h | 1 - include/configs/cam_enc_4xx.h | 1 - include/configs/canmb.h | 2 -- include/configs/cgtqmx6eval.h | 1 - include/configs/cm4008.h | 2 -- include/configs/cm41xx.h | 2 -- include/configs/cm5200.h | 1 - include/configs/cm_t35.h | 1 - include/configs/cobra5272.h | 2 -- include/configs/controlcenterd.h | 1 - include/configs/coreboot.h | 1 - include/configs/corenet_ds.h | 1 - include/configs/cpci5200.h | 2 -- include/configs/cpu9260.h | 1 - include/configs/cpuat91.h | 1 - include/configs/da830evm.h | 1 - include/configs/da850evm.h | 1 - include/configs/davinci_dm355evm.h | 1 - include/configs/davinci_dm355leopard.h | 1 - include/configs/davinci_dm365evm.h | 1 - include/configs/davinci_dm6467evm.h | 1 - include/configs/davinci_dvevm.h | 1 - include/configs/davinci_schmoogie.h | 1 - include/configs/davinci_sffsdr.h | 1 - include/configs/davinci_sonata.h | 1 - include/configs/dbau1x00.h | 2 -- include/configs/debris.h | 1 - include/configs/devkit8000.h | 1 - include/configs/dig297.h | 1 - include/configs/digsy_mtc.h | 2 -- include/configs/dvlhost.h | 1 - include/configs/eXalion.h | 1 - include/configs/ea20.h | 1 - include/configs/eb_cpu5282.h | 1 - include/configs/eb_cpux9k2.h | 1 - include/configs/ecovec.h | 1 - include/configs/edminiv2.h | 2 -- include/configs/enbw_cmc.h | 1 - include/configs/ep8248.h | 2 -- include/configs/ep8260.h | 2 -- include/configs/ep82xxm.h | 2 -- include/configs/espt.h | 1 - include/configs/ethernut5.h | 1 - include/configs/exynos5250-dt.h | 2 -- include/configs/favr-32-ezkit.h | 6 ------ include/configs/flea3.h | 2 -- include/configs/galaxy5200.h | 1 - include/configs/gr_cpci_ax2000.h | 2 -- include/configs/gr_ep2s60.h | 2 -- include/configs/gr_xc3s_1500.h | 2 -- include/configs/grasshopper.h | 6 ------ include/configs/grsim.h | 2 -- include/configs/grsim_leon2.h | 2 -- include/configs/gw8260.h | 1 - include/configs/h2200.h | 2 -- include/configs/hammerhead.h | 2 -- include/configs/hawkboard.h | 1 - include/configs/highbank.h | 2 -- include/configs/hmi1001.h | 2 -- include/configs/igep0033.h | 1 - include/configs/igep00x0.h | 1 - include/configs/ima3-mx53.h | 1 - include/configs/imx27lite-common.h | 1 - include/configs/imx31_litekit.h | 2 -- include/configs/imx31_phycore.h | 2 -- include/configs/incaip.h | 2 -- include/configs/inka4x0.h | 2 -- include/configs/integrator-common.h | 1 - include/configs/ipam390.h | 1 - include/configs/ipek01.h | 1 - include/configs/jadecpu.h | 1 - include/configs/jornada.h | 1 - include/configs/jupiter.h | 2 -- include/configs/km/keymile-common.h | 2 -- include/configs/korat.h | 2 -- include/configs/kvme080.h | 1 - include/configs/kzm9g.h | 2 -- include/configs/linkstation.h | 1 - include/configs/lubbock.h | 1 - include/configs/lwmon.h | 2 -- include/configs/lwmon5.h | 2 -- include/configs/m53evk.h | 1 - include/configs/mcc200.h | 2 -- include/configs/mcx.h | 1 - include/configs/mecp5123.h | 2 -- include/configs/mecp5200.h | 2 -- include/configs/meesc.h | 1 - include/configs/microblaze-generic.h | 1 - include/configs/mimc200.h | 2 -- include/configs/motionpro.h | 2 -- include/configs/mpc5121ads.h | 1 - include/configs/mpc7448hpc2.h | 2 -- include/configs/mpc8308_p1m.h | 1 - include/configs/mpq101.h | 1 - include/configs/mpr2.h | 1 - include/configs/ms7720se.h | 1 - include/configs/ms7722se.h | 1 - include/configs/ms7750se.h | 1 - include/configs/muas3001.h | 2 -- include/configs/munices.h | 1 - include/configs/mv-common.h | 1 - include/configs/mx1ads.h | 1 - include/configs/mx25pdk.h | 1 - include/configs/mx31ads.h | 2 -- include/configs/mx31pdk.h | 2 -- include/configs/mx35pdk.h | 2 -- include/configs/mx51_efikamx.h | 1 - include/configs/mx51evk.h | 1 - include/configs/mx53ard.h | 1 - include/configs/mx53evk.h | 1 - include/configs/mx53loco.h | 1 - include/configs/mx53smd.h | 1 - include/configs/mx6qarm2.h | 1 - include/configs/mx6sabre_common.h | 1 - include/configs/mx6slevk.h | 1 - include/configs/mxs.h | 3 --- include/configs/nhk8815.h | 1 - include/configs/nios2-generic.h | 1 - include/configs/nitrogen6x.h | 1 - include/configs/nokia_rx51.h | 1 - include/configs/o2dnt-common.h | 1 - include/configs/omap1510inn.h | 1 - include/configs/omap3_beagle.h | 1 - include/configs/omap3_evm_common.h | 1 - include/configs/omap3_logic.h | 1 - include/configs/omap3_mvblx.h | 1 - include/configs/omap3_overo.h | 1 - include/configs/omap3_pandora.h | 1 - include/configs/omap3_sdp3430.h | 1 - include/configs/omap3_zoom1.h | 1 - include/configs/omap4_common.h | 1 - include/configs/omap5912osk.h | 1 - include/configs/openrisc-generic.h | 1 - include/configs/origen.h | 2 -- include/configs/otc570.h | 1 - include/configs/p1_p2_rdb_pc.h | 1 - include/configs/p1_twr.h | 1 - include/configs/p3mx.h | 2 -- include/configs/p3p440.h | 2 -- include/configs/palmtreo680.h | 1 - include/configs/pb1x00.h | 2 -- include/configs/pcm030.h | 1 - include/configs/pcm051.h | 1 - include/configs/pcs440ep.h | 2 -- include/configs/pdm360ng.h | 1 - include/configs/pdnb3.h | 1 - include/configs/pf5200.h | 2 -- include/configs/pm9261.h | 2 -- include/configs/pm9263.h | 2 -- include/configs/pm9g45.h | 1 - include/configs/ppmc7xx.h | 1 - include/configs/ppmc8260.h | 1 - include/configs/pxa255_idp.h | 1 - include/configs/qemu-malta.h | 1 - include/configs/qemu-mips.h | 2 -- include/configs/qemu-mips64.h | 2 -- include/configs/qong.h | 2 -- include/configs/quad100hd.h | 2 -- include/configs/quantum.h | 2 -- include/configs/r0p7734.h | 1 - include/configs/r2dplus.h | 1 - include/configs/r7780mp.h | 1 - include/configs/rpi_b.h | 3 --- include/configs/s5p_goni.h | 2 -- include/configs/s5pc210_universal.h | 2 -- include/configs/sacsng.h | 1 - include/configs/sama5d3xek.h | 1 - include/configs/sandbox.h | 2 -- include/configs/sbc35_a9g20.h | 1 - include/configs/sbc405.h | 2 -- include/configs/sbc8349.h | 1 - include/configs/sbc8548.h | 1 - include/configs/sbc8641d.h | 1 - include/configs/sh7752evb.h | 1 - include/configs/sh7757lcr.h | 1 - include/configs/sh7763rdp.h | 1 - include/configs/sh7785lcr.h | 1 - include/configs/shmin.h | 1 - include/configs/smdk2410.h | 2 -- include/configs/smdkc100.h | 2 -- include/configs/smdkv310.h | 2 -- include/configs/snapper9260.h | 1 - include/configs/snowball.h | 1 - include/configs/socfpga_cyclone5.h | 1 - include/configs/socrates.h | 1 - include/configs/spear-common.h | 1 - include/configs/spieval.h | 2 -- include/configs/stamp9g20.h | 1 - include/configs/stxgp3.h | 1 - include/configs/stxssa.h | 1 - include/configs/t4qds.h | 1 - include/configs/tam3517-common.h | 1 - include/configs/tb0229.h | 2 -- include/configs/tegra-common.h | 2 -- include/configs/ti814x_evm.h | 2 -- include/configs/ti816x_evm.h | 1 - include/configs/ti_armv7_common.h | 1 - include/configs/titanium.h | 1 - include/configs/tnetv107x_evm.h | 1 - include/configs/tny_a9260.h | 1 - include/configs/top9000.h | 1 - include/configs/trats.h | 2 -- include/configs/tricorder.h | 1 - include/configs/trizepsiv.h | 1 - include/configs/tt01.h | 2 -- include/configs/tx25.h | 1 - include/configs/u8500_href.h | 1 - include/configs/utx8245.h | 1 - include/configs/v38b.h | 2 -- include/configs/vct.h | 1 - include/configs/ve8313.h | 1 - include/configs/vexpress_common.h | 1 - include/configs/vf610twr.h | 1 - include/configs/vision2.h | 1 - include/configs/vl_ma2sc.h | 1 - include/configs/vme8349.h | 1 - include/configs/wandboard.h | 1 - include/configs/woodburn_common.h | 3 --- include/configs/x600.h | 1 - include/configs/xaeniax.h | 1 - include/configs/xilinx-ppc.h | 1 - include/configs/xpedite1000.h | 1 - include/configs/xpedite517x.h | 1 - include/configs/xpedite520x.h | 1 - include/configs/xpedite537x.h | 1 - include/configs/xpedite550x.h | 1 - include/configs/zeus.h | 2 -- include/configs/zmx25.h | 1 - include/configs/zynq.h | 1 - 412 files changed, 4 insertions(+), 626 deletions(-)
arch/arm/include/asm/arch-lpc32xx/config.h +0 -3
@@ -15,9 +15,6 @@#define CONFIG_NR_DRAM_BANKS_MAX 2 -/* 1KHz clock tick */ -#define CONFIG_SYS_HZ 1000 -/* UART configuration */ #if (CONFIG_SYS_LPC32XX_UART >=3 ) && (CONFIG_SYS_LPC32XX_UART <=6 )#define CONFIG_SYS_NS16550_SERIAL
include/config_fallbacks.h +4 -0
@@ -53,4 +53,8 @@#define HAVE_BLOCK_DEVICE #endif +#ifndef CONFIG_SYS_HZ +#define CONFIG_SYS_HZ 1000 +#endif +#endif /* __CONFIG_FALLBACKS_H */
include/configs/A3000.h +0 -1
@@ -168,7 +168,6 @@*/ #define CONFIG_SYS_CLK_FREQ 33333333/* external frequency to pll */ -#define CONFIG_SYS_HZ 1000/* Bit-field values for MCCR1. */
include/configs/AR405.h +0 -2
@@ -128,8 +128,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /*-----------------------------------------------------------------------
include/configs/ASH405.h +0 -2
@@ -123,8 +123,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1/* include version env variable */
include/configs/Adder.h +0 -2
@@ -82,8 +82,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* Default load address */ -#define CONFIG_SYS_HZ 1000/* Decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero) */
include/configs/B4860QDS.h +0 -1
@@ -725,7 +725,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks*/ /* * For booting Linux, the board info and command line data
include/configs/BC3450.h +0 -2
@@ -445,8 +445,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* dec freq: 1ms ticks */ -#define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB )# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */
include/configs/BSC9131RDB.h +0 -1
@@ -372,7 +372,6 @@ extern unsigned long get_sdram_size(void);/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/BSC9132QDS.h +0 -1
@@ -614,7 +614,6 @@ combinations. this should be removed later/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq:1ms ticks */ /*
include/configs/C29XPCIE.h +0 -1
@@ -401,7 +401,6 @@/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* dec freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/CATcenter.h +0 -2
@@ -185,8 +185,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /*-----------------------------------------------------------------------
include/configs/CMS700.h +0 -2
@@ -121,8 +121,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1/* include version env variable */
include/configs/CPC45.h +0 -1
@@ -180,7 +180,6 @@*/ #define CONFIG_SYS_CLK_FREQ 33000000 -#define CONFIG_SYS_HZ 1000/* Bit-field values for MCCR1.
include/configs/CPCI2DP.h +0 -2
@@ -111,8 +111,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_LOOPW 1/* enable loopw command */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
include/configs/CPCI405.h +0 -2
@@ -124,8 +124,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_LOOPW 1/* enable loopw command */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
include/configs/CPCI4052.h +0 -2
@@ -133,8 +133,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING /* add command line history */ #define CONFIG_LOOPW 1/* enable loopw command */
include/configs/CPCI405AB.h +0 -2
@@ -132,8 +132,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING /* add command line history */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
include/configs/CPCI405DT.h +0 -2
@@ -134,8 +134,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_LOOPW 1/* enable loopw command */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
include/configs/CPCI750.h +0 -1
@@ -219,7 +219,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00300000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decr freq: 1ms ticks */ #define CONFIG_SYS_BUS_CLK 133000000/* 133 MHz (CPU = 5*Bus = 666MHz) */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
include/configs/CPCIISER4.h +0 -2
@@ -111,8 +111,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /*-----------------------------------------------------------------------
include/configs/CPU87.h +0 -2
@@ -200,8 +200,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100/* "bad" address */ #define CONFIG_LOOPW
include/configs/CU824.h +0 -1
@@ -144,7 +144,6 @@*/ #define CONFIG_SYS_CLK_FREQ 33000000 -#define CONFIG_SYS_HZ 1000/* Bit-field values for MCCR1. */
include/configs/DB64360.h +0 -1
@@ -300,7 +300,6 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"#define CONFIG_SYS_LOAD_ADDR 0x00400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decr freq: 1ms ticks */ /*ronen - this the Sys clock (cpu bus,internal dram and SDRAM) */ #define CONFIG_SYS_BUS_CLK 133000000/* 133 MHz (CPU = 5*Bus = 666MHz) */
include/configs/DB64460.h +0 -1
@@ -238,7 +238,6 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"#define CONFIG_SYS_LOAD_ADDR 0x00400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decr freq: 1ms ticks */ /*ronen - this the Sys clock (cpu bus,internal dram and SDRAM) */ #define CONFIG_SYS_BUS_CLK 133000000/* 133 MHz (CPU = 5*Bus = 666MHz) */
include/configs/DP405.h +0 -2
@@ -98,8 +98,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1/* include version env variable */
include/configs/DU405.h +0 -2
@@ -115,8 +115,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_SYS_RX_ETH_BUFFER 16/* use 16 rx buffer on 405 emac */
include/configs/DU440.h +0 -2
@@ -327,8 +327,6 @@ int du440_phy_addr(int devnum);#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_LOOPW 1/* enable loopw command */ #define CONFIG_MX_CYCLIC 1/* enable mdc/mwc commands */
include/configs/ELPPC.h +0 -2
@@ -96,8 +96,6 @@#define CONFIG_SYS_LOAD_ADDR 0x1000000/* default load address */ -#define CONFIG_SYS_HZ 1000/* dec. freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }/*
include/configs/ELPT860.h +0 -2
@@ -120,8 +120,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Environment Variables and Storages */
include/configs/EP88x.h +0 -2
@@ -77,8 +77,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* Default load address */ -#define CONFIG_SYS_HZ 1000/* Decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero) */
include/configs/FLAGADM.h +0 -2
@@ -94,8 +94,6 @@#define CONFIG_SYS_LOAD_ADDR 0x40040000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/G2000.h +0 -2
@@ -150,8 +150,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_BOOTDELAY 3/* autoboot after 3 seconds */
include/configs/GEN860T.h +0 -5
@@ -310,11 +310,6 @@#define CONFIG_SYS_LOAD_ADDR 0x01000000/* -* Set decrementer frequency (1 ms ticks) -*/ -#define CONFIG_SYS_HZ 1000 - -/* * Device memory map (after SDRAM remap to 0x0): * * CS Device Base Addr Size
include/configs/HIDDEN_DRAGON.h +0 -1
@@ -70,7 +70,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ /*----------------------------------------------------------------------- * PCI stuff
include/configs/HUB405.h +0 -2
@@ -117,8 +117,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1/* include version env variable */
include/configs/HWW1U1A.h +0 -2
@@ -53,8 +53,6 @@/* Enable IRQs and watchdog with a 1000Hz system decrementer */ #define CONFIG_CMD_IRQ -#define CONFIG_SYS_HZ 1000 -/* -------------------------------------------------------------------- */
include/configs/IPHASE4539.h +0 -2
@@ -154,8 +154,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_RESET_ADDRESS 0x04400000#define CONFIG_MISC_INIT_R 1/* We need misc_init_r() */
include/configs/ISPAN.h +0 -2
@@ -141,8 +141,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* Default load address */ -#define CONFIG_SYS_HZ 1000/* Decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_RESET_ADDRESS 0x09900000#define CONFIG_MISC_INIT_R /* We need misc_init_r() */
include/configs/IceCube.h +0 -2
@@ -315,8 +315,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB )# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */
include/configs/JSE.h +0 -2
@@ -192,8 +192,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_PPC4XX #define CONFIG_SYS_I2C_PPC4XX_CH0
include/configs/KUP4K.h +0 -2
@@ -172,8 +172,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 115200 }#define CONFIG_SYS_CONSOLE_INFO_QUIET 1
include/configs/KUP4X.h +0 -2
@@ -191,8 +191,6 @@#define CONFIG_SYS_MEMTEST_END 0x003C00000/* 4 ... 60 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x200000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 115200 }#define CONFIG_SYS_CONSOLE_INFO_QUIET 1
include/configs/M5208EVBE.h +0 -1
@@ -113,7 +113,6 @@#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Arg Buf Sz */ #define CONFIG_SYS_LOAD_ADDR 0x40010000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 166666666/* CPU Core Clock */ #define CONFIG_SYS_PLL_ODR 0x36#define CONFIG_SYS_PLL_FDR 0x7D
include/configs/M52277EVB.h +0 -2
@@ -176,8 +176,6 @@#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_MBAR 0xFC000000/*
include/configs/M5235EVB.h +0 -1
@@ -133,7 +133,6 @@#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE+0x20000) -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 75000000#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 2
include/configs/M5249EVB.h +0 -2
@@ -69,8 +69,6 @@#define CONFIG_SYS_MEMTEST_START 0x400#define CONFIG_SYS_MEMTEST_END 0x380000 -#define CONFIG_SYS_HZ 1000 -/* * Clock configuration: enable only one of the following options */
include/configs/M5253DEMO.h +0 -2
@@ -124,8 +124,6 @@ TABILITY or FITNESS FO04-2007 Freescale Semiconductor, Inc.#define CONFIG_SYS_MEMTEST_START 0x400#define CONFIG_SYS_MEMTEST_END 0x380000 -#define CONFIG_SYS_HZ 1000 -#undef CONFIG_SYS_PLL_BYPASS/* bypass PLL for test purpose */ #define CONFIG_SYS_FAST_CLK #ifdef CONFIG_SYS_FAST_CLK
include/configs/M5253EVBE.h +0 -2
@@ -93,8 +93,6 @@#define CONFIG_SYS_MEMTEST_START 0x400#define CONFIG_SYS_MEMTEST_END 0x380000 -#define CONFIG_SYS_HZ 1000 -#undef CONFIG_SYS_PLL_BYPASS/* bypass PLL for test purpose */ #define CONFIG_SYS_FAST_CLK #ifdef CONFIG_SYS_FAST_CLK
include/configs/M5272C3.h +0 -1
@@ -129,7 +129,6 @@#define CONFIG_SYS_LOAD_ADDR 0x20000#define CONFIG_SYS_MEMTEST_START 0x400#define CONFIG_SYS_MEMTEST_END 0x380000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 66000000/*
include/configs/M5275EVB.h +0 -1
@@ -139,7 +139,6 @@"save\0" \ "" -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 150000000/*
include/configs/M5282EVB.h +0 -1
@@ -117,7 +117,6 @@#define CONFIG_SYS_MEMTEST_START 0x400#define CONFIG_SYS_MEMTEST_END 0x380000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 64000000/* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */
include/configs/M53017EVB.h +0 -1
@@ -133,7 +133,6 @@#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Arg Buf Sz */ #define CONFIG_SYS_LOAD_ADDR 0x40010000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 80000000#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3
include/configs/M5329EVB.h +0 -1
@@ -126,7 +126,6 @@#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x40010000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 80000000#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3
include/configs/M5373EVB.h +0 -1
@@ -126,7 +126,6 @@#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x40010000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 80000000#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3
include/configs/M54418TWR.h +0 -2
@@ -253,8 +253,6 @@#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_MBAR 0xFC000000/*
include/configs/M54451EVB.h +0 -2
@@ -187,8 +187,6 @@#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_MBAR 0xFC000000/*
include/configs/M54455EVB.h +0 -2
@@ -246,8 +246,6 @@#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_MBAR 0xFC000000/*
include/configs/M5475EVB.h +0 -1
@@ -172,7 +172,6 @@#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00010000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK CONFIG_SYS_BUSCLK#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 2
include/configs/M5485EVB.h +0 -1
@@ -158,7 +158,6 @@#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00010000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK CONFIG_SYS_BUSCLK#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 2
include/configs/MBX.h +0 -2
@@ -98,8 +98,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/MERGERBOX.h +0 -1
@@ -367,7 +367,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000#define CONFIG_LOADS_ECHO 1#define CONFIG_SYS_LOADS_BAUD_CHANGE 1
include/configs/MHPC.h +0 -2
@@ -144,8 +144,6 @@#define CONFIG_SYS_LOAD_ADDR 0x300000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/MIP405.h +0 -2
@@ -180,8 +180,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * PCI stuff *-----------------------------------------------------------------------
include/configs/MOUSSE.h +0 -1
@@ -153,7 +153,6 @@#define CONFIG_SYS_CLK_FREQ 33000000/* external frequency to pll */ #define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 2 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_ETH_DEV_FN 0x00#define CONFIG_SYS_ETH_IOBASE 0x00104000
include/configs/MPC8260ADS.h +0 -2
@@ -287,8 +287,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }#define CONFIG_SYS_FLASH_BASE 0xff800000
include/configs/MPC8266ADS.h +0 -2
@@ -229,8 +229,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }#define CONFIG_SYS_FLASH_BASE 0xFE000000
include/configs/MPC8308RDB.h +0 -1
@@ -471,7 +471,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8313ERDB.h +0 -1
@@ -520,7 +520,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8315ERDB.h +0 -1
@@ -532,7 +532,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8323ERDB.h +0 -1
@@ -368,7 +368,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC832XEMDS.h +0 -1
@@ -454,7 +454,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8349EMDS.h +0 -1
@@ -520,7 +520,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8349ITX.h +0 -1
@@ -562,7 +562,6 @@ boards, we say we have two, but don't display a message if we find only one. */#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8360EMDS.h +0 -1
@@ -557,7 +557,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8360ERDK.h +0 -1
@@ -418,7 +418,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC837XEMDS.h +0 -1
@@ -536,7 +536,6 @@ extern int board_pci_host_broken(void);#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC837XERDB.h +0 -1
@@ -551,7 +551,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8536DS.h +0 -1
@@ -730,7 +730,6 @@ + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8540ADS.h +0 -1
@@ -387,7 +387,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8541CDS.h +0 -1
@@ -400,7 +400,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8544DS.h +0 -1
@@ -430,7 +430,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8548CDS.h +0 -1
@@ -525,7 +525,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8555CDS.h +0 -1
@@ -398,7 +398,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8560ADS.h +0 -1
@@ -428,7 +428,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8568MDS.h +0 -1
@@ -420,7 +420,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8569MDS.h +0 -1
@@ -556,7 +556,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_SYS_MAXARGS 32/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8572DS.h +0 -1
@@ -669,7 +669,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8610HPCD.h +0 -1
@@ -507,7 +507,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8641HPCN.h +0 -1
@@ -660,7 +660,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MUSENKI.h +0 -1
@@ -151,7 +151,6 @@*/ #define CONFIG_SYS_CLK_FREQ 33333333/* external frequency to pll */ -#define CONFIG_SYS_HZ 1000/* Bit-field values for MCCR1. */
include/configs/MVBC_P.h +0 -2
@@ -266,8 +266,6 @@#define CONFIG_SYS_MEMTEST_START 0x00800000#define CONFIG_SYS_MEMTEST_END 0x02f00000 -#define CONFIG_SYS_HZ 1000 -/* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x02000000/* default location for tftp and bootm */
include/configs/MVBLM7.h +0 -1
@@ -292,7 +292,6 @@ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* * For booting Linux, the board info and command line data
include/configs/MVSMR.h +0 -2
@@ -236,8 +236,6 @@#define CONFIG_SYS_MEMTEST_START 0x00800000#define CONFIG_SYS_MEMTEST_END 0x02f00000 -#define CONFIG_SYS_HZ 1000 -/* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x02000000/* default location for tftp and bootm */
include/configs/MigoR.h +0 -1
@@ -124,6 +124,5 @@/* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333#define CONFIG_SYS_TMU_CLK_DIV (4)/* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ 1000#endif /* __MIGO_R_H */
include/configs/NX823.h +0 -2
@@ -83,8 +83,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/OCRTC.h +0 -2
@@ -107,8 +107,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /*-----------------------------------------------------------------------
include/configs/ORSG.h +0 -2
@@ -105,8 +105,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /*-----------------------------------------------------------------------
include/configs/P1010RDB.h +0 -1
@@ -675,7 +675,6 @@ extern unsigned long get_sdram_size(void);/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* dec freq: 1ms ticks */ /* * Internal Definitions
include/configs/P1022DS.h +0 -1
@@ -715,7 +715,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* * For booting Linux, the board info and command line data
include/configs/P1023RDB.h +0 -1
@@ -323,7 +323,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/P1023RDS.h +0 -1
@@ -459,7 +459,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/P1_P2_RDB.h +0 -1
@@ -596,7 +596,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/P2020COME.h +0 -1
@@ -422,7 +422,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms tick */ /* * For booting Linux, the board info and command line data
include/configs/P2020DS.h +0 -1
@@ -659,7 +659,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/P2041RDB.h +0 -1
@@ -667,7 +667,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/PCI405.h +0 -2
@@ -110,8 +110,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#undef CONFIG_ZERO_BOOTDELAY_CHECK/* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1/* include version env variable */
include/configs/PCI5441.h +0 -1
@@ -101,7 +101,6 @@* If the default period is acceptable, TMRCNT can be left undefined. * TMRMS represents the desired mecs per tick (msecs per interrupt). *----------------------------------------------------------------------*/ -#define CONFIG_SYS_HZ 1000/* Always 1000 */ #define CONFIG_SYS_LOW_RES_TIMER #define CONFIG_SYS_NIOS_TMRBASE 0x00920860/* Tick timer base addr */ #define CONFIG_SYS_NIOS_TMRIRQ 3/* Timer IRQ num */
include/configs/PIP405.h +0 -2
@@ -173,8 +173,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * PCI stuff *-----------------------------------------------------------------------
include/configs/PK1C20.h +0 -1
@@ -111,7 +111,6 @@* If the default period is acceptable, TMRCNT can be left undefined. * TMRMS represents the desired mecs per tick (msecs per interrupt). *----------------------------------------------------------------------*/ -#define CONFIG_SYS_HZ 1000/* Always 1000 */ #define CONFIG_SYS_LOW_RES_TIMER #define CONFIG_SYS_NIOS_TMRBASE 0x02120820/* Tick timer base addr */ #define CONFIG_SYS_NIOS_TMRIRQ 3/* Timer IRQ num */
include/configs/PLU405.h +0 -2
@@ -134,8 +134,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_BOOTDELAY 3/* autoboot after 3 seconds */
include/configs/PM520.h +0 -2
@@ -266,8 +266,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB )# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */
include/configs/PM828.h +0 -2
@@ -183,8 +183,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC/* "bad" address */ /*
include/configs/PMC405.h +0 -2
@@ -128,8 +128,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_LOOPW 1/* enable loopw command */
include/configs/PMC405DE.h +0 -2
@@ -104,8 +104,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_LOOPW 1/* enable loopw command */ #define CONFIG_MX_CYCLIC 1/* enable mdc/mwc commands */
include/configs/PMC440.h +0 -2
@@ -388,8 +388,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_LOOPW 1/* enable loopw command */ #define CONFIG_MX_CYCLIC 1/* enable mdc/mwc commands */
include/configs/PN62.h +0 -1
@@ -92,7 +92,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ #define CONFIG_PRAM 1024/* reserve 1 MB protected RAM */
include/configs/PPChameleonEVB.h +0 -2
@@ -194,8 +194,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /*-----------------------------------------------------------------------
include/configs/QS823.h +0 -2
@@ -236,8 +236,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/QS850.h +0 -2
@@ -236,8 +236,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/QS860T.h +0 -2
@@ -146,8 +146,6 @@ CONFIG_SPI#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/RPXlite_DW.h +0 -2
@@ -162,8 +162,6 @@#define CONFIG_SYS_MEMTEST_END 0x00C0000/* 4 ... 12 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/RPXsuper.h +0 -1
@@ -214,7 +214,6 @@#define CONFIG_CLOCKS_IN_MHZ 1/* clocks passsed to Linux in MHz */ #define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ /* * Low Level Configuration Settings
include/configs/Rattler.h +0 -2
@@ -170,8 +170,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }#define CONFIG_SYS_FLASH_BASE 0xFE000000
include/configs/SIMPC8313.h +0 -1
@@ -366,7 +366,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/Sandpoint8240.h +0 -1
@@ -104,7 +104,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ /*----------------------------------------------------------------------- * PCI stuff
include/configs/Sandpoint8245.h +0 -1
@@ -72,7 +72,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ /*----------------------------------------------------------------------- * PCI stuff
include/configs/TASREG.h +0 -2
@@ -84,8 +84,6 @@#define CONFIG_SYS_MEMTEST_START 0x400#define CONFIG_SYS_MEMTEST_END 0x380000 -#define CONFIG_SYS_HZ 1000 -/* * Clock configuration: enable only one of the following options */
include/configs/TB5200.h +0 -2
@@ -410,8 +410,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Enable loopw command. */
include/configs/TK885D.h +0 -2
@@ -175,8 +175,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Enable loopw command. */
include/configs/TOP5200.h +0 -2
@@ -332,8 +332,6 @@#define CONFIG_SYS_LOAD_ADDR 0x200000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB )# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */
include/configs/TOP860.h +0 -1
@@ -68,7 +68,6 @@#define CONFIG_SYS_CPUCLOCK CONFIG_SYSCLK#define CONFIG_SYS_BRGCLOCK CONFIG_SYSCLK#define CONFIG_SYS_BUSCLOCK (CONFIG_SYSCLK >> CONFIG_EBDF) -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ #define CONFIG_8xx_GCLK_FREQ CONFIG_SYSCLK/*-----------------------------------------------------------------------
include/configs/TQM5200.h +0 -2
@@ -632,8 +632,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Enable loopw command. */
include/configs/TQM834x.h +0 -1
@@ -334,7 +334,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ #undef CONFIG_WATCHDOG/* watchdog disabled */
include/configs/TQM866M.h +0 -2
@@ -177,8 +177,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/TQM885D.h +0 -2
@@ -173,8 +173,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Enable loopw command. */
include/configs/Total5200.h +0 -2
@@ -294,8 +294,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB )# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */
include/configs/VCMA9.h +0 -1
@@ -162,7 +162,6 @@#define CONFIG_SYS_LOAD_ADDR 0x30800000/* we configure PWM Timer 4 to 1ms 1000Hz */ -#define CONFIG_SYS_HZ 1000/* support additional compression methods */ #define CONFIG_BZIP2
include/configs/VOH405.h +0 -2
@@ -132,8 +132,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1/* include version env variable */
include/configs/VOM405.h +0 -2
@@ -119,8 +119,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
include/configs/VoVPN-GW.h +0 -1
@@ -232,7 +232,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00100000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_HZ 1000/* configure flash */ #define CONFIG_SYS_FLASH_BASE 0xff800000
include/configs/W7OLMC.h +0 -2
@@ -126,8 +126,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* use extended board_info (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * PCI stuff *-----------------------------------------------------------------------
include/configs/W7OLMG.h +0 -2
@@ -134,8 +134,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* use extended board_info (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * PCI stuff *-----------------------------------------------------------------------
include/configs/WUH405.h +0 -2
@@ -121,8 +121,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1/* include version env variable */
include/configs/ZPC1900.h +0 -2
@@ -154,8 +154,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }#define CONFIG_SYS_SDRAM_BASE 0x00000000
include/configs/ZUMA.h +0 -2
@@ -146,8 +146,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00300000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decr freq: 1ms ticks */ -#define CONFIG_SYS_BUS_CLK 133000000/* 133 MHz */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
include/configs/a320evb.h +0 -1
@@ -37,7 +37,6 @@/* * Timer */ -#define CONFIG_SYS_HZ 1000/* timer ticks per second */ /* * Real Time Clock
include/configs/a3m071.h +0 -1
@@ -265,7 +265,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00100000 -#define CONFIG_SYS_HZ 1000#define CONFIG_LOOPW #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup*/
include/configs/a4m072.h +0 -2
@@ -286,8 +286,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB )# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */
include/configs/ac14xx.h +0 -3
@@ -440,9 +440,6 @@/* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* decrementer freq: 1ms ticks */ -#define CONFIG_SYS_HZ 1000 -/* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is
include/configs/actux1.h +0 -1
@@ -79,7 +79,6 @@/* timer clock - 2* OSC_IN system clock */ #define CONFIG_IXP425_TIMER_CLK 66666666 -#define CONFIG_SYS_HZ 1000/* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x00010000
include/configs/actux2.h +0 -1
@@ -72,7 +72,6 @@/* timer clock - 2* OSC_IN system clock */ #define CONFIG_IXP425_TIMER_CLK 66666666 -#define CONFIG_SYS_HZ 1000/* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x00010000
include/configs/actux3.h +0 -1
@@ -70,7 +70,6 @@/* timer clock - 2* OSC_IN system clock */ #define CONFIG_IXP425_TIMER_CLK 66666666 -#define CONFIG_SYS_HZ 1000/* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x00010000
include/configs/actux4.h +0 -1
@@ -77,7 +77,6 @@/* timer clock - 2* OSC_IN system clock */ #define CONFIG_IXP425_TIMER_CLK 66000000 -#define CONFIG_SYS_HZ 1000/* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x00010000
include/configs/adp-ag101.h +0 -6
@@ -40,12 +40,6 @@/* * Timer */ - -/* -* According to the discussion in u-boot mailing list before, -* CONFIG_SYS_HZ at 1000 is mandatory. -*/ -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK_FREQ 48000000#define VERSION_CLOCK CONFIG_SYS_CLK_FREQ
include/configs/adp-ag101p.h +0 -6
@@ -40,12 +40,6 @@/* * Timer */ - -/* -* According to the discussion in u-boot mailing list before, -* CONFIG_SYS_HZ at 1000 is mandatory. -*/ -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK_FREQ 39062500#define VERSION_CLOCK CONFIG_SYS_CLK_FREQ
include/configs/adp-ag102.h +0 -6
@@ -32,12 +32,6 @@/* * Timer */ - -/* -* According to the discussion in u-boot mailing list before, -* CONFIG_SYS_HZ at 1000 is mandatory. -*/ -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK_FREQ (66000000 * 2)#define VERSION_CLOCK CONFIG_SYS_CLK_FREQ
include/configs/aev.h +0 -2
@@ -338,8 +338,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB )# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */
include/configs/afeb9260.h +0 -1
@@ -17,7 +17,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18429952/* from 18.432 MHz crystal */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_HZ 1000#define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO
include/configs/alpr.h +0 -2
@@ -255,8 +255,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_LOOPW 1/* enable loopw command */ #define CONFIG_MX_CYCLIC 1/* enable mdc/mwc commands */
include/configs/am3517_crane.h +0 -1
@@ -239,7 +239,6 @@*/ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/*----------------------------------------------------------------------- * Physical Memory Map
include/configs/am3517_evm.h +0 -1
@@ -231,7 +231,6 @@*/ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/*----------------------------------------------------------------------- * Physical Memory Map
include/configs/am43xx_evm.h +0 -1
@@ -75,7 +75,6 @@#define CONFIG_SYS_TIMERBASE 0x48040000/* Use Timer2 */ #define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/* NS16550 Configuration */ #define CONFIG_SYS_NS16550
include/configs/amcc-common.h +0 -2
@@ -90,8 +90,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_LOOPW /* enable loopw command */
include/configs/ap325rxa.h +0 -1
@@ -156,6 +156,5 @@/* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333#define CONFIG_SYS_TMU_CLK_DIV (4)/* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ 1000#endif /* __AP325RXA_H */
include/configs/ap_sh4a_4a.h +0 -1
@@ -159,6 +159,5 @@#define CONFIG_SYS_CLK_FREQ 44444444#endif #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000#endif /* __AP_SH4A_4A_H */
include/configs/aria.h +0 -2
@@ -485,8 +485,6 @@/* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 -/* * For booting Linux, the board info and command line data * have to be in the first 256 MB of memory, since this is
include/configs/armadillo-800eva.h +0 -1
@@ -139,6 +139,5 @@/* Board Clock */ #define CONFIG_SYS_CLK_FREQ 50000000#define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000#endif /* __ARMADILLO_800EVA_H */
include/configs/astro_mcf5373l.h +0 -2
@@ -110,10 +110,8 @@/* * Defines processor clock - important for correct timings concerning serial * interface etc. -* CONFIG_SYS_HZ gives unit: 1000 -> 1 Hz ^= 1000 ms */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 80000000#define CONFIG_SYS_CPU_CLK (CONFIG_SYS_CLK * 3)#define CONFIG_SYS_SDRAM_SIZE 32/* SDRAM size in MB */
include/configs/at91rm9200ek.h +0 -1
@@ -43,7 +43,6 @@#define AT91C_MAIN_CLOCK ((AT91C_XTAL_CLOCK / 4) * 39)#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3 )#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2) -#define CONFIG_SYS_HZ 1000/* CPU configuration */ #define CONFIG_AT91RM9200
include/configs/at91sam9260ek.h +0 -1
@@ -28,7 +28,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768/* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000/* main clock xtal */ -#define CONFIG_SYS_HZ 1000/* Define actual evaluation board type from used processor type */ #ifdef CONFIG_AT91SAM9G20
include/configs/at91sam9261ek.h +0 -1
@@ -14,7 +14,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768/* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000/* 18.432 MHz crystal */ -#define CONFIG_SYS_HZ 1000#ifdef CONFIG_AT91SAM9G10 #define CONFIG_AT91SAM9G10EK /* It's an Atmel AT91SAM9G10 EK*/
include/configs/at91sam9263ek.h +0 -1
@@ -26,7 +26,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16367660/* 16.367 MHz crystal */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_HZ 1000#define CONFIG_AT91SAM9263EK 1/* It's an AT91SAM9263EK Board */
include/configs/at91sam9m10g45ek.h +0 -1
@@ -19,7 +19,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000/* from 12 MHz crystal */ -#define CONFIG_SYS_HZ 1000#define CONFIG_AT91SAM9M10G45EK #define CONFIG_AT91FAMILY
include/configs/at91sam9n12ek.h +0 -1
@@ -24,7 +24,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768/* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* main clock xtal */ -#define CONFIG_SYS_HZ 1000/* Misc CPU related */ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
include/configs/at91sam9rlek.h +0 -1
@@ -18,7 +18,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768/* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000/* main clock xtal */ -#define CONFIG_SYS_HZ 1000#define CONFIG_AT91SAM9RLEK 1/* It's an AT91SAM9RLEK Board */
include/configs/at91sam9x5ek.h +0 -1
@@ -14,7 +14,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000/* 12 MHz crystal */ -#define CONFIG_SYS_HZ 1000#define CONFIG_AT91SAM9X5EK #define CONFIG_AT91FAMILY
include/configs/atngw100.h +0 -2
@@ -15,8 +15,6 @@#define CONFIG_AT32AP7000 #define CONFIG_ATNGW100 -#define CONFIG_SYS_HZ 1000 -/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
include/configs/atngw100mkii.h +0 -6
@@ -18,12 +18,6 @@#define CONFIG_ATNGW100MKII /* -* Timer clock frequency. We're using the CPU-internal COUNT register -* for this, so this is equivalent to the CPU core clock frequency -*/ -#define CONFIG_SYS_HZ 1000 - -/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency * and the PBA bus to run at 1/4 the PLL frequency.
include/configs/atstk1002.h +0 -6
@@ -17,12 +17,6 @@#define CONFIG_ATSTK1000 /* -* Timer clock frequency. We're using the CPU-internal COUNT register -* for this, so this is equivalent to the CPU core clock frequency -*/ -#define CONFIG_SYS_HZ 1000 - -/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the * PLL frequency.
include/configs/atstk1003.h +0 -6
@@ -17,12 +17,6 @@#define CONFIG_ATSTK1000 /* -* Timer clock frequency. We're using the CPU-internal COUNT register -* for this, so this is equivalent to the CPU core clock frequency -*/ -#define CONFIG_SYS_HZ 1000 - -/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the * PLL frequency.
include/configs/atstk1004.h +0 -6
@@ -17,12 +17,6 @@#define CONFIG_ATSTK1000 /* -* Timer clock frequency. We're using the CPU-internal COUNT register -* for this, so this is equivalent to the CPU core clock frequency -*/ -#define CONFIG_SYS_HZ 1000 - -/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the * PLL frequency.
include/configs/atstk1006.h +0 -5
@@ -16,11 +16,6 @@#define CONFIG_ATSTK1006 #define CONFIG_ATSTK1000 -/* -* Timer clock frequency. We're using the CPU-internal COUNT register -* for this, so this is equivalent to the CPU core clock frequency -*/ -#define CONFIG_SYS_HZ 1000/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
include/configs/calimain.h +0 -1
@@ -31,7 +31,6 @@#define CONFIG_SYS_OSCIN_FREQ calimain_get_osc_freq()#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_TEXT_BASE 0x60000000#define CONFIG_DA850_LOWLEVEL #define CONFIG_SYS_DA850_PLL_INIT
include/configs/cam_enc_4xx.h +0 -1
@@ -17,7 +17,6 @@#define CONFIG_ARM926EJS /* arm926ejs CPU */ #define CONFIG_SYS_TIMERBASE 0x01c21400/* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 24000000/* timer0 freq */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SOC_DM365 #define CONFIG_MACH_TYPE MACH_TYPE_DAVINCI_DM365_EVM
include/configs/canmb.h +0 -2
@@ -189,8 +189,6 @@#define CONFIG_SYS_LOAD_ADDR 0x200000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_RTC_MPC5200 1/* use internal MPC5200 RTC */ #define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */
include/configs/cgtqmx6eval.h +0 -1
@@ -143,7 +143,6 @@#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000#define CONFIG_CMDLINE_EDITING
include/configs/cm4008.h +0 -2
@@ -75,8 +75,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00008000/* default load address */ -#define CONFIG_SYS_HZ (1000)/* 1ms resolution ticks */ -/*----------------------------------------------------------------------- * Physical Memory Map */
include/configs/cm41xx.h +0 -2
@@ -75,8 +75,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00008000/* default load address */ -#define CONFIG_SYS_HZ (1000)/* 1ms resolution ticks */ -/*----------------------------------------------------------------------- * Physical Memory Map */
include/configs/cm5200.h +0 -1
@@ -296,7 +296,6 @@#define CONFIG_LOOPW 1#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ /* * Various low-level settings
include/configs/cm_t35.h +0 -1
@@ -258,7 +258,6 @@*/ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/*----------------------------------------------------------------------- * Physical Memory Map
include/configs/cobra5272.h +0 -2
@@ -37,11 +37,9 @@/* --- * Defines processor clock - important for correct timings concerning serial * interface etc. -* CONFIG_SYS_HZ gives unit: 1000 -> 1 Hz ^= 1000 ms * --- */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 66000000#define CONFIG_SYS_SDRAM_SIZE 16/* SDRAM size in MB */
include/configs/controlcenterd.h +0 -1
@@ -440,7 +440,6 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_HZ 1000#define CONFIG_HW_WATCHDOG #define CONFIG_LOADS_ECHO #define CONFIG_SYS_LOADS_BAUD_CHANGE
include/configs/coreboot.h +0 -1
@@ -221,7 +221,6 @@#define CONFIG_SYS_MEMTEST_START 0x00100000#define CONFIG_SYS_MEMTEST_END 0x01000000#define CONFIG_SYS_LOAD_ADDR 0x100000 -#define CONFIG_SYS_HZ 1000/*----------------------------------------------------------------------- * SDRAM Configuration
include/configs/corenet_ds.h +0 -1
@@ -662,7 +662,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/cpci5200.h +0 -2
@@ -268,8 +268,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000/* Pass Ethernet MAC to VxWorks */ #define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */
include/configs/cpu9260.h +0 -1
@@ -20,7 +20,6 @@#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_AT91_SLOW_CLOCK 32768#if defined(CONFIG_CPU9G20 )
include/configs/cpuat91.h +0 -1
@@ -25,7 +25,6 @@#define AT91C_MAIN_CLOCK ((AT91C_XTAL_CLOCK / 4) * 39)#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3)#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2) -#define CONFIG_SYS_HZ 1000#define CONFIG_ARM920T #define CONFIG_AT91RM9200
include/configs/da830evm.h +0 -1
@@ -28,7 +28,6 @@#define CONFIG_SYS_OSCIN_FREQ 24000000#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_HZ 1000#define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_TEXT_BASE 0xc1080000
include/configs/da850evm.h +0 -1
@@ -33,7 +33,6 @@#define CONFIG_SYS_OSCIN_FREQ 24000000#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_DA850_PLL_INIT #define CONFIG_SYS_DA850_DDR_INIT
include/configs/davinci_dm355evm.h +0 -1
@@ -18,7 +18,6 @@#define CONFIG_ARM926EJS /* arm926ejs CPU */ #define CONFIG_SYS_TIMERBASE 0x01c21400/* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 24000000/* timer0 freq */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SOC_DM355 /* Memory Info */
include/configs/davinci_dm355leopard.h +0 -1
@@ -17,7 +17,6 @@#define CONFIG_ARM926EJS /* arm926ejs CPU */ #define CONFIG_SYS_TIMERBASE 0x01c21400/* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 24000000/* timer0 freq */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SOC_DM355 /* DM355 based board */ /* Memory Info */
include/configs/davinci_dm365evm.h +0 -1
@@ -18,7 +18,6 @@#define CONFIG_ARM926EJS /* arm926ejs CPU */ #define CONFIG_SYS_TIMERBASE 0x01c21400/* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 24000000/* timer0 freq */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SOC_DM365 /* Memory Info */
include/configs/davinci_dm6467evm.h +0 -1
@@ -27,7 +27,6 @@ extern unsigned int davinci_arm_clk_get(void);/* Timer Input clock freq */ #define CONFIG_SYS_HZ_CLOCK (CONFIG_SYS_CLK_FREQ/2)#define CONFIG_SYS_TIMERBASE 0x01c21400/* use timer 0 */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SOC_DM646X /* EEPROM definitions for EEPROM */
include/configs/davinci_dvevm.h +0 -1
@@ -44,7 +44,6 @@#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SYS_TIMERBASE 0x01c21400/* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000/* Timer Input clock freq */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SOC_DM644X /*====================================================*/ /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
include/configs/davinci_schmoogie.h +0 -1
@@ -22,7 +22,6 @@#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SYS_TIMERBASE 0x01c21400/* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000/* Timer Input clock freq */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SOC_DM644X /*=============*/ /* Memory Info */
include/configs/davinci_sffsdr.h +0 -1
@@ -19,7 +19,6 @@#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SYS_TIMERBASE 0x01c21400/* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000/* Timer Input clock freq */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SOC_DM644X /* EEPROM definitions for Atmel 24LC64 EEPROM chip */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
include/configs/davinci_sonata.h +0 -1
@@ -46,7 +46,6 @@#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SYS_TIMERBASE 0x01c21400/* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000/* Timer Input clock freq */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SOC_DM644X /*====================================================*/ /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
include/configs/dbau1x00.h +0 -2
@@ -133,8 +133,6 @@#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_SDRAM_BASE 0x80000000/* Cached addr */ #define CONFIG_SYS_LOAD_ADDR 0x81000000/* default load address */
include/configs/debris.h +0 -1
@@ -149,7 +149,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ /*----------------------------------------------------------------------- * PCI stuff
include/configs/devkit8000.h +0 -1
@@ -257,7 +257,6 @@*/ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2/* CS1 may or may not be populated */
include/configs/dig297.h +0 -1
@@ -239,7 +239,6 @@*/ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/*----------------------------------------------------------------------- * Physical Memory Map
include/configs/digsy_mtc.h +0 -2
@@ -416,8 +416,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00100000 -#define CONFIG_SYS_HZ 1000 -/* * Various low-level settings */
include/configs/dvlhost.h +0 -1
@@ -78,7 +78,6 @@/* timer clock - 2* OSC_IN system clock */ #define CONFIG_IXP425_TIMER_CLK 66666666 -#define CONFIG_SYS_HZ 1000/* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x00010000
include/configs/eXalion.h +0 -1
@@ -217,7 +217,6 @@* (address mappings, register initial values, etc.) * You should know what you are doing if you make changes here. */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK_FREQ 33333333/* external frequency to pll */ #define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 2/* for MPC8240 only */
include/configs/ea20.h +0 -1
@@ -35,7 +35,6 @@#define CONFIG_SYS_OSCIN_FREQ 24000000#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_HZ 1000#define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_TEXT_BASE 0xc1080000#define CONFIG_DA8XX_GPIO
include/configs/eb_cpu5282.h +0 -1
@@ -98,7 +98,6 @@/*----------------------------------------------------------------------* * Clock and PLL Configuration * *----------------------------------------------------------------------*/ -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 80000000/* 8MHz * 8 */ /* PLL Configuration: Ext Clock * 8 (see table 9-4 of MCF user manual) */
include/configs/eb_cpux9k2.h +0 -1
@@ -59,7 +59,6 @@#define AT91C_MAIN_CLOCK 179404800/* from 12.288 MHz * 73 / 5 */ #define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3) -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2)#define CONFIG_SYS_AT91_SLOW_CLOCK 32768/* slow clock */
include/configs/ecovec.h +0 -1
@@ -180,6 +180,5 @@/* Board Clock */ #define CONFIG_SYS_CLK_FREQ 41666666#define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000#endif /* __ECOVEC_H */
include/configs/edminiv2.h +0 -2
@@ -34,8 +34,6 @@* CLKs configurations */ -#define CONFIG_SYS_HZ 1000 -/* * Board-specific values for Orion5x MPP low level init: * - MPPs 12 to 15 are SATA LEDs (mode 5)
include/configs/enbw_cmc.h +0 -1
@@ -33,7 +33,6 @@#define CONFIG_SYS_OSCIN_FREQ 24000000#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_HZ 1000#define CONFIG_DA850_LOWLEVEL #define CONFIG_ARCH_CPU_INIT #define CONFIG_SYS_DA850_PLL_INIT
include/configs/ep8248.h +0 -2
@@ -154,8 +154,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }#define CONFIG_SYS_FLASH_BASE 0xFF800000
include/configs/ep8260.h +0 -2
@@ -359,8 +359,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/ep82xxm.h +0 -2
@@ -165,8 +165,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }/*-----------------------------------------------------------------------
include/configs/espt.h +0 -1
@@ -99,7 +99,6 @@/* Clock */ #define CONFIG_SYS_CLK_FREQ 66666666#define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000/* Ether */ #define CONFIG_SH_ETHER 1
include/configs/ethernut5.h +0 -1
@@ -31,7 +31,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768/* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000/* 18.432 MHz crystal */ -#define CONFIG_SYS_HZ 1000/* 32kB internal SRAM */ #define CONFIG_SRAM_BASE 0x00300000/*AT91SAM9XE_SRAM_BASE */
include/configs/exynos5250-dt.h +0 -2
@@ -177,8 +177,6 @@#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) -#define CONFIG_SYS_HZ 1000 -#define CONFIG_RD_LVL #define CONFIG_NR_DRAM_BANKS 8
include/configs/favr-32-ezkit.h +0 -6
@@ -18,12 +18,6 @@#define CONFIG_FAVR32_EZKIT_EXT_FLASH /* -* Timer clock frequency. We're using the CPU-internal COUNT register -* for this, so this is equivalent to the CPU core clock frequency -*/ -#define CONFIG_SYS_HZ 1000 - -/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the * PLL frequency.
include/configs/flea3.h +0 -2
@@ -130,8 +130,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 -/* * Physical Memory Map */
include/configs/galaxy5200.h +0 -1
@@ -352,7 +352,6 @@#define CONFIG_SYS_MEMTEST_END 0x00f00000/* 1 ... 15 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ #define CONFIG_DISPLAY_BOARDINFO 1
include/configs/gr_cpci_ax2000.h +0 -2
@@ -304,8 +304,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Various low-level settings */
include/configs/gr_ep2s60.h +0 -2
@@ -293,8 +293,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * USB stuff *-----------------------------------------------------------------------
include/configs/gr_xc3s_1500.h +0 -2
@@ -252,8 +252,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Various low-level settings */
include/configs/grasshopper.h +0 -6
@@ -16,12 +16,6 @@#define CONFIG_AT32AP7000 /* -* Timer clock frequency. We're using the CPU-internal COUNT register -* for this, so this is equivalent to the CPU core clock frequency -*/ -#define CONFIG_SYS_HZ 1000 - -/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the * PLL frequency.
include/configs/grsim.h +0 -2
@@ -279,8 +279,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/***** Gaisler GRLIB IP-Cores Config ********/ /* AMBA Plug & Play info display on startup */
include/configs/grsim_leon2.h +0 -2
@@ -277,8 +277,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/***** Gaisler GRLIB IP-Cores Config ********/ #define CONFIG_SYS_GRLIB_SDRAM 0
include/configs/gw8260.h +0 -1
@@ -352,7 +352,6 @@#define CONFIG_CLOCKS_IN_MHZ #define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ /* memtest works from the end of the exception vector table
include/configs/h2200.h +0 -2
@@ -17,8 +17,6 @@#define CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_HZ 1000 -#define CONFIG_NR_DRAM_BANKS 1#define PHYS_SDRAM_1 0xa0000000/* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x04000000/* 64 MB */
include/configs/hammerhead.h +0 -2
@@ -13,8 +13,6 @@#define CONFIG_AT32AP7000 #define CONFIG_HAMMERHEAD -#define CONFIG_SYS_HZ 1000 -/* * Set up the PLL to run at 125 MHz, the CPU to run at the PLL * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
include/configs/hawkboard.h +0 -1
@@ -28,7 +28,6 @@#define CONFIG_SYS_OSCIN_FREQ 24000000#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_HZ 1000#define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_AIS_CONFIG_FILE "board/$(BOARDDIR)/hawkboard-ais-nand.cfg"
include/configs/highbank.h +0 -2
@@ -12,8 +12,6 @@#define CONFIG_SYS_THUMB_BUILD #define CONFIG_SYS_NO_FLASH -#define CFG_HZ 1000 -#define CONFIG_SYS_HZ CFG_HZ#define CONFIG_OF_LIBFDT #define CONFIG_OF_BOARD_SETUP
include/configs/hmi1001.h +0 -2
@@ -237,8 +237,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Enable loopw command. */
include/configs/igep0033.h +0 -1
@@ -144,7 +144,6 @@/* Platform/Board specific defs */ #define CONFIG_SYS_TIMERBASE 0x48040000/* Use Timer2 */ #define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/* 1ms clock */ /* NS16550 Configuration */ #define CONFIG_SYS_NS16550
include/configs/igep00x0.h +0 -1
@@ -237,7 +237,6 @@*/ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/* * Physical Memory Map
include/configs/ima3-mx53.h +0 -1
@@ -111,7 +111,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000#define CONFIG_CMDLINE_EDITING /* Physical Memory Map */
include/configs/imx27lite-common.h +0 -1
@@ -16,7 +16,6 @@#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_MX27 #define CONFIG_MX27_CLK32 32768/* OSC32K frequency */ -#define CONFIG_SYS_HZ 1000#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_DISPLAY_CPUINFO
include/configs/imx31_litekit.h +0 -2
@@ -117,8 +117,6 @@#define CONFIG_SYS_LOAD_ADDR 0/* default load address */ -#define CONFIG_SYS_HZ 1000 -#define CONFIG_CMDLINE_EDITING 1/*-----------------------------------------------------------------------
include/configs/imx31_phycore.h +0 -2
@@ -121,8 +121,6 @@#define CONFIG_SYS_LOAD_ADDR 0/* default load address */ -#define CONFIG_SYS_HZ 1000 -#define CONFIG_CMDLINE_EDITING /*
include/configs/incaip.h +0 -2
@@ -106,8 +106,6 @@#define CONFIG_SYS_MIPS_TIMER_FREQ (incaip_get_cpuclk() / 2) -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_SDRAM_BASE 0x80000000#define CONFIG_SYS_LOAD_ADDR 0x80100000/* default load address */
include/configs/inka4x0.h +0 -2
@@ -348,8 +348,6 @@ static inline void tws_data_config_output(unsigned output)#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Enable loopw command. */
include/configs/integrator-common.h +0 -1
@@ -12,7 +12,6 @@#define CONFIG_SYS_TEXT_BASE 0x01000000#define CONFIG_SYS_MEMTEST_START 0x100000#define CONFIG_SYS_MEMTEST_END 0x10000000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_TIMERBASE 0x13000100/* Timer1 */ #define CONFIG_SYS_LOAD_ADDR 0x7fc0/* default load address */ #define CONFIG_SYS_LONGHELP
include/configs/ipam390.h +0 -1
@@ -33,7 +33,6 @@#define CONFIG_SYS_OSCIN_FREQ 24000000#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_DA850_PLL_INIT #define CONFIG_SYS_DA850_DDR_INIT #define CONFIG_SYS_TEXT_BASE 0xc1080000
include/configs/ipek01.h +0 -1
@@ -297,7 +297,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ #define CONFIG_LOOPW /*
include/configs/jadecpu.h +0 -1
@@ -12,7 +12,6 @@#define CONFIG_MB86R0x#define CONFIG_MB86R0x_IOCLK get_bus_freq(0) -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_TEXT_BASE 0x10000000#define CONFIG_ARM926EJS 1/* This is an ARM926EJS Core */
include/configs/jornada.h +0 -1
@@ -70,7 +70,6 @@#define CONFIG_SYS_BARGSIZE 256/* Boot Argument Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0xc0040000/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0xc2000000/* 4..128 MB */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CPUSPEED 0x0a/* core clock 206MHz */ #define CONFIG_SYS_BAUDRATE_TABLE { 19200, 38400, 57600, 115200 }
include/configs/jupiter.h +0 -2
@@ -262,8 +262,6 @@#define CONFIG_SYS_LOAD_ADDR 0x200000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB )# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */
include/configs/km/keymile-common.h +0 -2
@@ -54,8 +54,6 @@#define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */ -#define CONFIG_SYS_HZ 1000/* decr. freq: 1 ms ticks */ -#define CONFIG_BAUDRATE 115200#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
include/configs/korat.h +0 -2
@@ -324,8 +324,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_LOOPW 1/* enable loopw command */ #define CONFIG_MX_CYCLIC 1/* enable mdc/mwc commands */
include/configs/kvme080.h +0 -1
@@ -96,7 +96,6 @@#define CONFIG_SYS_MEMTEST_END 0x07C00000#define CONFIG_SYS_LOAD_ADDR 0x00100000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
include/configs/kzm9g.h +0 -2
@@ -126,8 +126,6 @@#define CONFIG_SYS_CLK_FREQ (48000000)#define CONFIG_SYS_CPU_CLK (1196000000)#define TMU_CLK_DIVIDER (4)/* 4 (default), 16, 64, 256 or 1024 */ -#define CFG_HZ (1000) -#define CONFIG_SYS_HZ CFG_HZ/* Ether */ #define CONFIG_NET_MULTI
include/configs/linkstation.h +0 -1
@@ -306,7 +306,6 @@/* FIXME: 32.768 MHz is the crystal frequency but */ /* the real frequency is lower by about 0.75% */ #define CONFIG_SYS_CLK_FREQ 32768000 -#define CONFIG_SYS_HZ 1000/* Bit-field values for MCCR1. */ #define CONFIG_SYS_ROMNAL 0
include/configs/lubbock.h +0 -1
@@ -111,7 +111,6 @@#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DRAM_BASE + 0x8000)/* default load address */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CPUSPEED 0x161/* set core clock to 400/200/100 MHz */ #ifdef CONFIG_MMC
include/configs/lwmon.h +0 -2
@@ -213,8 +213,6 @@#define CONFIG_SYS_PIO_MODE 0/* IDE interface in PIO Mode 0 */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * When the watchdog is enabled, output must be fast enough in Linux. */
include/configs/lwmon5.h +0 -2
@@ -482,8 +482,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_LOOPW 1/* enable loopw command */ #define CONFIG_MX_CYCLIC 1/* enable mdc/mwc commands */
include/configs/m53evk.h +0 -1
@@ -10,7 +10,6 @@#define CONFIG_MX53 #define CONFIG_MXC_GPIO -#define CONFIG_SYS_HZ 1000#include <asm/arch/imx-regs.h>
include/configs/mcc200.h +0 -2
@@ -303,8 +303,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB )# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */
include/configs/mcx.h +0 -1
@@ -303,7 +303,6 @@*/ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/* * Physical Memory Map
include/configs/mecp5123.h +0 -2
@@ -343,8 +343,6 @@/* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 -/* * For booting Linux, the board info and command line data * have to be in the first 256 MB of memory, since this is
include/configs/mecp5200.h +0 -2
@@ -250,8 +250,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000/* Pass Ethernet MAC to VxWorks */ #define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */
include/configs/meesc.h +0 -1
@@ -40,7 +40,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768/* 32.768 kHz crystal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */ -#define CONFIG_SYS_HZ 1000/* decrementer freq */ /* Misc CPU related */ #define CONFIG_SKIP_LOWLEVEL_INIT
include/configs/microblaze-generic.h +0 -1
@@ -399,7 +399,6 @@/* architecture dependent code */ #define CONFIG_SYS_USR_EXCEP /* user exception */ -#define CONFIG_SYS_HZ 1000#define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot;echo"
include/configs/mimc200.h +0 -2
@@ -17,8 +17,6 @@#define CONFIG_MIMC200_EXT_FLASH -#define CONFIG_SYS_HZ 1000 -/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
include/configs/motionpro.h +0 -2
@@ -380,8 +380,6 @@ extern void __led_set(led_id_t id, int state);#define CONFIG_SYS_LOAD_ADDR 0x200000/* default kernel load addr */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Various low-level settings */
include/configs/mpc5121ads.h +0 -1
@@ -498,7 +498,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/mpc7448hpc2.h +0 -2
@@ -187,8 +187,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decr freq: 1ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/mpc8308_p1m.h +0 -1
@@ -421,7 +421,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/mpq101.h +0 -1
@@ -334,7 +334,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/mpr2.h +0 -1
@@ -68,7 +68,6 @@/* Clocks */ #define CONFIG_SYS_CLK_FREQ 24000000#define CONFIG_SYS_TMU_CLK_DIV 4/* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ 1000/* UART */ #define CONFIG_SCIF_CONSOLE 1
include/configs/ms7720se.h +0 -1
@@ -86,7 +86,6 @@/* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333#define CONFIG_SYS_TMU_CLK_DIV 4/* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ 1000/* PCMCIA */ #define CONFIG_IDE_PCMCIA 1
include/configs/ms7722se.h +0 -1
@@ -112,6 +112,5 @@/* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333#define CONFIG_SYS_TMU_CLK_DIV (4)/* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ 1000#endif /* __MS7722SE_H */
include/configs/ms7750se.h +0 -1
@@ -83,6 +83,5 @@/* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333#define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000#endif /* __MS7750SE_H */
include/configs/muas3001.h +0 -2
@@ -196,8 +196,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }#define CONFIG_SYS_SDRAM_BASE 0x00000000
include/configs/munices.h +0 -1
@@ -176,7 +176,6 @@#define CONFIG_SYS_MEMTEST_END 0x00f00000/* 1 ... 15 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x200000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ #define CONFIG_DISPLAY_BOARDINFO 1#define CONFIG_CMDLINE_EDITING 1
include/configs/mv-common.h +0 -1
@@ -35,7 +35,6 @@/* * CLKs configurations */ -#define CONFIG_SYS_HZ 1000/* * NS16550 Configuration
include/configs/mx1ads.h +0 -1
@@ -114,7 +114,6 @@#define CONFIG_SYS_MEMTEST_END 0x0AF00000/* 63 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x08800000/* default load address */ -/*#define CONFIG_SYS_HZ 1000 */ #define CONFIG_SYS_HZ 3686400#define CONFIG_SYS_CPUSPEED 0x141
include/configs/mx25pdk.h +0 -1
@@ -12,7 +12,6 @@/* High Level Configuration Options */ #define CONFIG_MX25 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_TEXT_BASE 0x81200000#define CONFIG_MXC_GPIO
include/configs/mx31ads.h +0 -2
@@ -135,8 +135,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 -#define CONFIG_CMDLINE_EDITING 1/*-----------------------------------------------------------------------
include/configs/mx31pdk.h +0 -2
@@ -137,8 +137,6 @@/* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x81000000 -#define CONFIG_SYS_HZ 1000 -#define CONFIG_CMDLINE_EDITING /*-----------------------------------------------------------------------
include/configs/mx35pdk.h +0 -2
@@ -155,8 +155,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 -/* * Physical Memory Map */
include/configs/mx51_efikamx.h +0 -1
@@ -227,7 +227,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000#define CONFIG_CMDLINE_EDITING /*-----------------------------------------------------------------------
include/configs/mx51evk.h +0 -1
@@ -232,7 +232,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000#define CONFIG_CMDLINE_EDITING /*-----------------------------------------------------------------------
include/configs/mx53ard.h +0 -1
@@ -200,7 +200,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000#define CONFIG_CMDLINE_EDITING /* Physical Memory Map */
include/configs/mx53evk.h +0 -1
@@ -150,7 +150,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000#define CONFIG_CMDLINE_EDITING /* Physical Memory Map */
include/configs/mx53loco.h +0 -1
@@ -192,7 +192,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000#define CONFIG_CMDLINE_EDITING /* Physical Memory Map */
include/configs/mx53smd.h +0 -1
@@ -135,7 +135,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000#define CONFIG_CMDLINE_EDITING /* Physical Memory Map */
include/configs/mx6qarm2.h +0 -1
@@ -127,7 +127,6 @@#define CONFIG_SYS_MEMTEST_END 0x10010000#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000#define CONFIG_CMDLINE_EDITING
include/configs/mx6sabre_common.h +0 -1
@@ -185,7 +185,6 @@#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000#define CONFIG_CMDLINE_EDITING #define CONFIG_STACKSIZE (128 * 1024)
include/configs/mx6slevk.h +0 -1
@@ -149,7 +149,6 @@#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_512M)#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000#define CONFIG_CMDLINE_EDITING #define CONFIG_STACKSIZE SZ_128K
include/configs/mxs.h +0 -3
@@ -41,9 +41,6 @@* CPU specifics */ -/* Ticks per second */ -#define CONFIG_SYS_HZ 1000 -/* MXS uses FDT */ #define CONFIG_OF_LIBFDT
include/configs/nhk8815.h +0 -1
@@ -76,7 +76,6 @@#define CONFIG_BOARD_LATE_INIT /* call board_late_init during start up */ /* timing informazion */ -#define CONFIG_SYS_HZ 1000/* Mandatory... */ #define CONFIG_SYS_TIMERBASE 0x101E2000/* serial port (PL011) configuration */
include/configs/nios2-generic.h +0 -1
@@ -39,7 +39,6 @@#define CONFIG_SYS_LOW_RES_TIMER #define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_TIMER_BASE#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_TIMER_IRQ -#define CONFIG_SYS_HZ 1000/* Always 1000 */ #define CONFIG_SYS_NIOS_TMRMS 10/* Desired period (msec)*/ #define CONFIG_SYS_NIOS_TMRCNT \ (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_TIMER_FREQ / 1000) - 1)
include/configs/nitrogen6x.h +0 -1
@@ -299,7 +299,6 @@#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000#define CONFIG_CMDLINE_EDITING
include/configs/nokia_rx51.h +0 -1
@@ -426,7 +426,6 @@ int rx51_kp_getc(void);*/ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/* * Stack sizes
include/configs/o2dnt-common.h +0 -1
@@ -332,7 +332,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_HZ 1000/* * Various low-level settings
include/configs/omap1510inn.h +0 -1
@@ -116,7 +116,6 @@*/ #define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE/* use timer 1 */ #define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/*----------------------------------------------------------------------- * Physical Memory Map
include/configs/omap3_beagle.h +0 -1
@@ -341,7 +341,6 @@*/ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/*----------------------------------------------------------------------- * Physical Memory Map
include/configs/omap3_evm_common.h +0 -1
@@ -35,7 +35,6 @@*/ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/* Size of environment - 128KB */ #define CONFIG_ENV_SIZE (128 << 10)
include/configs/omap3_logic.h +0 -1
@@ -265,7 +265,6 @@*/ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/* * Physical Memory Map
include/configs/omap3_mvblx.h +0 -1
@@ -236,7 +236,6 @@*/ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/*----------------------------------------------------------------------- * Physical Memory Map
include/configs/omap3_overo.h +0 -1
@@ -217,7 +217,6 @@*/ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/*----------------------------------------------------------------------- * Physical Memory Map
include/configs/omap3_pandora.h +0 -1
@@ -201,7 +201,6 @@*/ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/*----------------------------------------------------------------------- * Physical Memory Map
include/configs/omap3_sdp3430.h +0 -1
@@ -273,7 +273,6 @@*/ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
include/configs/omap3_zoom1.h +0 -1
@@ -228,7 +228,6 @@*/ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/*----------------------------------------------------------------------- * Physical Memory Map
include/configs/omap4_common.h +0 -1
@@ -220,7 +220,6 @@/* Use General purpose timer 1 */ #define CONFIG_SYS_TIMERBASE GPT2_BASE#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/* * SDRAM Memory Map
include/configs/omap5912osk.h +0 -1
@@ -118,7 +118,6 @@*/ #define CONFIG_SYS_TIMERBASE 0xFFFEC500/* use timer 1 */ #define CONFIG_SYS_PTV 7/* 2^(PTV+1), divide by 256 */ -#define CONFIG_SYS_HZ 1000/*----------------------------------------------------------------------- * Physical Memory Map
include/configs/openrisc-generic.h +0 -1
@@ -55,7 +55,6 @@/* * TIMER */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_OPENRISC_TMR_HZ 100/*
include/configs/origen.h +0 -2
@@ -102,8 +102,6 @@#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x6000000)#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) -#define CONFIG_SYS_HZ 1000 -/* ORIGEN has 4 bank of DRAM */ #define CONFIG_NR_DRAM_BANKS 4#define SDRAM_BANK_SIZE (256UL << 20UL)/* 256 MB */
include/configs/otc570.h +0 -1
@@ -39,7 +39,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768/* 32.768 kHz crystal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */ -#define CONFIG_SYS_HZ 1000/* decrementer freq */ /* Misc CPU related */ #define CONFIG_SKIP_LOWLEVEL_INIT
include/configs/p1_p2_rdb_pc.h +0 -1
@@ -834,7 +834,6 @@/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms tick */ /* * For booting Linux, the board info and command line data
include/configs/p1_twr.h +0 -1
@@ -482,7 +482,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms tick */ /* * For booting Linux, the board info and command line data
include/configs/p3mx.h +0 -2
@@ -284,8 +284,6 @@#define CONFIG_SYS_LOAD_ADDR 0x08000000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_LOOPW 1/* enable loopw command */ #define CONFIG_MX_CYCLIC 1/* enable mdc/mwc commands */
include/configs/p3p440.h +0 -2
@@ -213,8 +213,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_AUTO_COMPLETE 1/* add autocompletion support */ #define CONFIG_LOOPW 1/* enable loopw command */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
include/configs/palmtreo680.h +0 -1
@@ -120,7 +120,6 @@* Clock Configuration */ #undef CONFIG_SYS_CLKS_IN_HZ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ #define CONFIG_SYS_CPUSPEED 0x210/* 416MHz ; N=2,L=16 */ /*
include/configs/pb1x00.h +0 -2
@@ -66,8 +66,6 @@#define CONFIG_SYS_MIPS_TIMER_FREQ 396000000 -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_SDRAM_BASE 0x80000000/* Cached addr */ #define CONFIG_SYS_LOAD_ADDR 0x81000000/* default load address */
include/configs/pcm030.h +0 -1
@@ -364,7 +364,6 @@ RTC configuration#define CONFIG_SYS_MEMTEST_END 0x00f00000/* 1 ... 15 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ #define CONFIG_DISPLAY_BOARDINFO 1
include/configs/pcm051.h +0 -1
@@ -155,7 +155,6 @@/* Platform/Board specific defs */ #define CONFIG_SYS_TIMERBASE 0x48040000/* Use Timer2 */ #define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/* 1ms clock */ #define CONFIG_CONS_INDEX 1/* NS16550 Configuration */
include/configs/pcs440ep.h +0 -2
@@ -293,8 +293,6 @@#define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ #define CONFIG_LYNXKDI 1/* support kdi files */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * PCI stuff *-----------------------------------------------------------------------
include/configs/pdm360ng.h +0 -1
@@ -417,7 +417,6 @@/* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Decrementer freq: 1ms ticks */ -#define CONFIG_SYS_HZ 1000/* * For booting Linux, the board info and command line data
include/configs/pdnb3.h +0 -1
@@ -100,7 +100,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00010000/* default load address */ #define CONFIG_IXP425_TIMER_CLK 66666666 -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ /*************************************************************** * Platform/Board specific defines start here.
include/configs/pf5200.h +0 -2
@@ -254,8 +254,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000/* Pass Ethernet MAC to VxWorks */ #define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */
include/configs/pm9261.h +0 -2
@@ -28,8 +28,6 @@#define CONFIG_SYS_AT91_SLOW_CLOCK 32768/* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9261"#define CONFIG_PM9261 1/* on a Ronetix PM9261 Board */ #define CONFIG_ARCH_CPU_INIT
include/configs/pm9263.h +0 -2
@@ -28,8 +28,6 @@#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000#define CONFIG_SYS_AT91_SLOW_CLOCK 32768/* slow clock xtal */ -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9263"#define CONFIG_PM9263 1/* on a Ronetix PM9263 Board */ #define CONFIG_ARCH_CPU_INIT
include/configs/pm9g45.h +0 -1
@@ -31,7 +31,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000/* from 12 MHz crystal */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768/* slow clock xtal */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_TEXT_BASE 0x73f00000#define CONFIG_ARCH_CPU_INIT
include/configs/ppmc7xx.h +0 -1
@@ -363,7 +363,6 @@*/ #define CONFIG_SYS_BUS_CLK CONFIG_BUS_CLK -#define CONFIG_SYS_HZ 1000/*
include/configs/ppmc8260.h +0 -1
@@ -315,7 +315,6 @@#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x140000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ #define CONFIG_SYS_MEMTEST_START 0x2000/* memtest works from the end of */ /* the exception vector table */
include/configs/pxa255_idp.h +0 -1
@@ -224,7 +224,6 @@#define CONFIG_SYS_LOAD_ADDR 0xa0800000/* default load address */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CPUSPEED 0x161/* set core clock to 400/200/100 MHz */ #define RTC 1/* enable 32KHz osc */
include/configs/qemu-malta.h +0 -1
@@ -25,7 +25,6 @@*/ #define CONFIG_SYS_MHZ 250/* arbitrary value */ #define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_DCACHE_SIZE 16384/* arbitrary value */ #define CONFIG_SYS_ICACHE_SIZE 16384/* arbitrary value */
include/configs/qemu-mips.h +0 -2
@@ -106,8 +106,6 @@#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) -#define CONFIG_SYS_HZ 1000 -/* Cached addr */ #define CONFIG_SYS_SDRAM_BASE 0x80000000
include/configs/qemu-mips64.h +0 -2
@@ -108,8 +108,6 @@#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) -#define CONFIG_SYS_HZ 1000 -/* Cached addr */ #define CONFIG_SYS_SDRAM_BASE 0xffffffff80000000
include/configs/qong.h +0 -2
@@ -189,8 +189,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 -#define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
include/configs/quad100hd.h +0 -2
@@ -122,8 +122,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_info (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_LOADS_ECHO 1/* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1/* allow baudrate change */
include/configs/quantum.h +0 -2
@@ -124,8 +124,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/r0p7734.h +0 -1
@@ -165,6 +165,5 @@#define CONFIG_SYS_CLK_FREQ 44444444#endif #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000#endif /* __R0P7734_H */
include/configs/r2dplus.h +0 -1
@@ -78,7 +78,6 @@*/ #define CONFIG_SYS_CLK_FREQ 60000000#define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_PLL_SETTLING_TIME 100/* in us */ /*
include/configs/r7780mp.h +0 -1
@@ -103,7 +103,6 @@/* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333#define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000/* PCI Controller */ #if defined(CONFIG_CMD_PCI )
include/configs/rpi_b.h +0 -3
@@ -30,9 +30,6 @@*/ #define CONFIG_MACH_TYPE MACH_TYPE_BCM2708 -/* Timer */ -#define CONFIG_SYS_HZ 1000 -/* Memory layout */ #define CONFIG_NR_DRAM_BANKS 1#define CONFIG_SYS_SDRAM_BASE 0x00000000
include/configs/s5p_goni.h +0 -2
@@ -170,8 +170,6 @@#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000)#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4000000) -#define CONFIG_SYS_HZ 1000 -/* Goni has 3 banks of DRAM, but swap the bank */ #define CONFIG_NR_DRAM_BANKS 3#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE/* OneDRAM Bank #0 */
include/configs/s5pc210_universal.h +0 -2
@@ -198,8 +198,6 @@#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000)#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000) -#define CONFIG_SYS_HZ 1000 -/* Universal has 2 banks of DRAM */ #define CONFIG_NR_DRAM_BANKS 2#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE/* LDDDR2 DMC 0 */
include/configs/sacsng.h +0 -1
@@ -584,7 +584,6 @@#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ #define CONFIG_SYS_ALT_MEMTEST /* Select full-featured memory test */ #define CONFIG_SYS_MEMTEST_START 0x2000/* memtest works from the end of */
include/configs/sama5d3xek.h +0 -1
@@ -20,7 +20,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000/* from 12 MHz crystal */ -#define CONFIG_SYS_HZ 1000#define CONFIG_AT91FAMILY #define CONFIG_ARCH_CPU_INIT
include/configs/sandbox.h +0 -2
@@ -66,8 +66,6 @@#define CONFIG_ENV_SIZE 8192#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_SYS_HZ 1000 -/* Memory things - we don't really want a memory test */ #define CONFIG_SYS_LOAD_ADDR 0x00000000#define CONFIG_SYS_MEMTEST_START 0x00100000
include/configs/sbc35_a9g20.h +0 -1
@@ -26,7 +26,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768/* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000/* 12.000 MHz crystal */ -#define CONFIG_SYS_HZ 1000#define CONFIG_ARCH_CPU_INIT
include/configs/sbc405.h +0 -2
@@ -146,8 +146,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_info (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_VERSION_VARIABLE 1/* include version env variable */ #define CONFIG_SYS_RX_ETH_BUFFER 16/* use 16 rx buffer on 405 emac */
include/configs/sbc8349.h +0 -1
@@ -451,7 +451,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/sbc8548.h +0 -1
@@ -566,7 +566,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/sbc8641d.h +0 -1
@@ -507,7 +507,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/sh7752evb.h +0 -1
@@ -133,5 +133,4 @@/* Board Clock */ #define CONFIG_SYS_CLK_FREQ 48000000#define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000#endif /* __SH7752EVB_H */
include/configs/sh7757lcr.h +0 -1
@@ -141,5 +141,4 @@/* Board Clock */ #define CONFIG_SYS_CLK_FREQ 48000000#define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000#endif /* __SH7757LCR_H */
include/configs/sh7763rdp.h +0 -1
@@ -99,7 +99,6 @@/* Clock */ #define CONFIG_SYS_CLK_FREQ 66666666#define CONFIG_SYS_TMU_CLK_DIV (4)/* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ 1000/* Ether */ #define CONFIG_SH_ETHER 1
include/configs/sh7785lcr.h +0 -1
@@ -173,6 +173,5 @@/* The SCIF used external clock. system clock only used timer. */ #define CONFIG_SYS_CLK_FREQ 50000000#define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000#endif /* __SH7785LCR_H */
include/configs/shmin.h +0 -1
@@ -104,7 +104,6 @@#define CONFIG_SYS_CLK_FREQ 33333333#endif /* CONFIG_T_SH7706LSR */ #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000/* Network device */ #define CONFIG_DRIVER_NE2000
include/configs/smdk2410.h +0 -2
@@ -124,8 +124,6 @@#define CONFIG_SYS_LOAD_ADDR 0x30800000 -#define CONFIG_SYS_HZ 1000 -/* support additional compression methods */ #define CONFIG_BZIP2 #define CONFIG_LZO
include/configs/smdkc100.h +0 -2
@@ -163,8 +163,6 @@#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5e00000)#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_HZ 1000 -/* SMDKC100 has 1 banks of DRAM, we use only one in U-Boot */ #define CONFIG_NR_DRAM_BANKS 1#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE/* SDRAM Bank #1 */
include/configs/smdkv310.h +0 -2
@@ -101,8 +101,6 @@#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x6000000)#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) -#define CONFIG_SYS_HZ 1000 -/* SMDKV310 has 4 bank of DRAM */ #define CONFIG_NR_DRAM_BANKS 4#define SDRAM_BANK_SIZE (512UL << 20UL)/* 512 MB */
include/configs/snapper9260.h +0 -1
@@ -20,7 +20,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000/* External Crystal, in Hz */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_HZ 1000/* CPU */ #define CONFIG_ARCH_CPU_INIT
include/configs/snowball.h +0 -1
@@ -27,7 +27,6 @@#define CONFIG_SYS_MEMTEST_START 0x00000000#define CONFIG_SYS_MEMTEST_END 0x1FFFFFFF -#define CONFIG_SYS_HZ 1000/* must be 1000 */ /*----------------------------------------------------------------------- * Size of environment and malloc() pool
include/configs/socfpga_cyclone5.h +0 -1
@@ -24,7 +24,6 @@#define CONFIG_SYS_TEXT_BASE 0x08000040#define V_NS16550_CLK 1000000#define CONFIG_BAUDRATE 57600 -#define CONFIG_SYS_HZ 1000#define CONFIG_TIMER_CLOCK_KHZ 2400#define CONFIG_SYS_LOAD_ADDR 0x7fc0
include/configs/socrates.h +0 -1
@@ -354,7 +354,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buf Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/spear-common.h +0 -1
@@ -47,7 +47,6 @@#define CONFIG_I2C_CHIPADDRESS 0x50/* Timer, HZ specific defines */ -#define CONFIG_SYS_HZ 1000/* Flash configuration */ #if defined(CONFIG_FLASH_PNOR )
include/configs/spieval.h +0 -2
@@ -402,8 +402,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB )# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */
include/configs/stamp9g20.h +0 -1
@@ -35,7 +35,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768/* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000/* 18.432MHz crystal */ -#define CONFIG_SYS_HZ 1000/* 1ms resolution */ /* misc settings */ #define CONFIG_CMDLINE_TAG /* pass commandline to Kernel */
include/configs/stxgp3.h +0 -1
@@ -331,7 +331,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x1000000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/stxssa.h +0 -1
@@ -366,7 +366,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x1000000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/t4qds.h +0 -1
@@ -293,7 +293,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks*/ /* * For booting Linux, the board info and command line data
include/configs/tam3517-common.h +0 -1
@@ -169,7 +169,6 @@*/ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/* * Physical Memory Map
include/configs/tb0229.h +0 -2
@@ -109,8 +109,6 @@#define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_TCLOCK_RATE/4) -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_SDRAM_BASE 0x80000000#define CONFIG_SYS_LOAD_ADDR 0x80400000/* default load address */
include/configs/tegra-common.h +0 -2
@@ -111,8 +111,6 @@#define CONFIG_SYS_MEMTEST_START (NV_PA_SDRC_CS0 + 0x600000)#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000) -#define CONFIG_SYS_HZ 1000 -/*----------------------------------------------------------------------- * Physical Memory Map */
include/configs/ti814x_evm.h +0 -2
@@ -122,7 +122,6 @@ + PHYS_DRAM_1_SIZE - (8 << 12))#define CONFIG_SYS_LOAD_ADDR 0x81000000/* Default */ -#define CONFIG_SYS_HZ 1000/* 1ms clock */ #define CONFIG_OMAP_GPIO #define CONFIG_MMC
@@ -149,7 +148,6 @@*/ #define CONFIG_SYS_TIMERBASE 0x4802E000#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/* NS16550 Configuration */ #define CONFIG_SYS_NS16550
include/configs/ti816x_evm.h +0 -1
@@ -60,7 +60,6 @@#undef CONFIG_SYS_CLKS_IN_HZ#define CONFIG_SYS_LOAD_ADDR 0x81000000/* Default load address */ -#define CONFIG_SYS_HZ 1000/* 1ms clock */ #define CONFIG_CMD_ASKEN #define CONFIG_CMD_ECHO
include/configs/ti_armv7_common.h +0 -1
@@ -56,7 +56,6 @@/* Timer information. */ #define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/* 1ms clock */ /* I2C IP block */ #define CONFIG_I2C
include/configs/titanium.h +0 -1
@@ -194,7 +194,6 @@#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000/* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1
include/configs/tnetv107x_evm.h +0 -1
@@ -30,7 +30,6 @@#define CONFIG_SYS_TIMERBASE TNETV107X_TIMER0_BASE#define CONFIG_SYS_HZ_CLOCK clk_get_rate(TNETV107X_LPSC_TIMER0) -#define CONFIG_SYS_HZ 1000#define CONFIG_PLL_SYS_EXT_FREQ 25000000#define CONFIG_PLL_TDM_EXT_FREQ 19200000
include/configs/tny_a9260.h +0 -1
@@ -40,7 +40,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768/* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000/* 12 MHz crystal */ -#define CONFIG_SYS_HZ 1000#define CONFIG_ARCH_CPU_INIT #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
include/configs/top9000.h +0 -1
@@ -51,7 +51,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768/* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000/* main clock xtal */ -#define CONFIG_SYS_HZ 1000/* Misc CPU related */ #define CONFIG_ARCH_CPU_INIT
include/configs/trats.h +0 -2
@@ -218,8 +218,6 @@#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000)#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000) -#define CONFIG_SYS_HZ 1000 -/* TRATS has 4 banks of DRAM */ #define CONFIG_NR_DRAM_BANKS 4#define SDRAM_BANK_SIZE (256UL << 20UL)/* 256 MB */
include/configs/tricorder.h +0 -1
@@ -227,7 +227,6 @@*/ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2/* CS1 may or may not be populated */
include/configs/trizepsiv.h +0 -1
@@ -150,7 +150,6 @@#define CONFIG_SYS_LOAD_ADDR 0xa1000000/* default load address */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CPUSPEED 0x207/* need to look more closely, I think this is Turbo = 2x, L=91Mhz */ #ifdef CONFIG_MMC
include/configs/tt01.h +0 -2
@@ -239,8 +239,6 @@/* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 -#define CONFIG_CMDLINE_EDITING /* MMC boot support */
include/configs/tx25.h +0 -1
@@ -15,7 +15,6 @@*/ #define CONFIG_MX25 #define CONFIG_MX25_CLK32 32000/* OSC32K frequency */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_MONITOR_LEN (256 << 10)/* 256 kB for U-Boot */
include/configs/u8500_href.h +0 -1
@@ -16,7 +16,6 @@#define CONFIG_SYS_MEMTEST_START 0x00000000#define CONFIG_SYS_MEMTEST_END 0x1FFFFFFF -#define CONFIG_SYS_HZ 1000/* must be 1000 */ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_LATE_INIT
include/configs/utx8245.h +0 -1
@@ -209,7 +209,6 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"*------------------------------------------------------------------*/ #define CONFIG_SYS_CLK_FREQ 33000000 -#define CONFIG_SYS_HZ 1000/*#define CONFIG_SYS_ETH_DEV_FN 0x7800 */ /*#define CONFIG_SYS_ETH_IOBASE 0x00104000 */
include/configs/v38b.h +0 -2
@@ -259,8 +259,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB )# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */
include/configs/vct.h +0 -1
@@ -28,7 +28,6 @@#define CONFIG_MIPS32 /* MIPS 4Kc CPU core */ #define CPU_CLOCK_RATE 324000000/* Clock for the MIPS core */ #define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_CLOCK_RATE / 2) -#define CONFIG_SYS_HZ 1000#define CONFIG_SKIP_LOWLEVEL_INIT /* SDRAM is initialized by the bootstrap code */
include/configs/ve8313.h +0 -1
@@ -351,7 +351,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of cmd args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot arg Buffer size */ -#define CONFIG_SYS_HZ 1000/* 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/vexpress_common.h +0 -1
@@ -117,7 +117,6 @@#define CONFIG_SYS_MEMTEST_START V2M_BASE#define CONFIG_SYS_MEMTEST_END 0x20000000 -#define CONFIG_SYS_HZ 1000#define CONFIG_CMDLINE_TAG 1/* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1
include/configs/vf610twr.h +0 -1
@@ -184,7 +184,6 @@#define CONFIG_SYS_MEMTEST_END 0x87C00000#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000/* * Stack sizes
include/configs/vision2.h +0 -1
@@ -157,7 +157,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000#define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_HUSH_PARSER
include/configs/vl_ma2sc.h +0 -1
@@ -198,7 +198,6 @@/* clocks */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_AT91_SLOW_CLOCK 32768/* slow clock */ #define MHZ180
include/configs/vme8349.h +0 -1
@@ -397,7 +397,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16/* max num of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buf Size */
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 1 line
1.8.1.2
Part of the diff is not shown here. View the raw message.
PATCH 1/1 config: consolidate CONFIG_SYS_HZ definition
Dear Rob Herring,
Quoted 1 line · In message <[email protected]> you wrote:
...
include/config_fallbacks.h line 58
Quoted 11 lines
include/config_fallbacks.h +3
-0@@ -53,4 +53,8 @@#define HAVE_BLOCK_DEVICE #endif +#ifndef CONFIG_SYS_HZ +#define CONFIG_SYS_HZ 1000 +#endif
This should be not a fallback (i. e. default value) which can be silently overwritten - this should be a mandatory definition that causes build errors if somebody tries to define a different value.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Steal five dollars and you were a petty thief. Steal thousands of
dollars and you are either a government or a hero.
- Terry Pratchett, _Going_Postal_PATCH 1/1 config: consolidate CONFIG_SYS_HZ definition
Quoted 13 lines · Wolfgang Denk
Dear Rob Herring,
Quoted 1 line · In message <[email protected]> you wrote:
...
Quoted 8 lines
include/config_fallbacks.h +0
-0@@ -53,4 +53,8 @@#define HAVE_BLOCK_DEVICE #endif
Quoted 7 lines
include/config_fallbacks.h line 58
Quoted 3 lines
include/config_fallbacks.h +3
-0+#ifndef CONFIG_SYS_HZ +#define CONFIG_SYS_HZ 1000 +#endif This should be not a fallback (i. e. default value) which can be silently overwritten - this should be a mandatory definition that causes build errors if somebody tries to define a different value.
What do I do with current boards that are wrong? I should make all these boards have build errors or fix them to use 1000 which may break them at runtime depending on their possible misuse of CONFIG_SYS_HZ?
include/configs/KAREF.h:#define CONFIG_SYS_HZ 100
/* decr freq: 1 ms ticks */
include/configs/M5271EVB.h:#define CONFIG_SYS_HZ 1000000
include/configs/METROBOX.h:#define CONFIG_SYS_HZ
100 /* decr freq: 1 ms ticks */
include/configs/MVBLUE.h:#define CONFIG_SYS_HZ 10000
include/configs/idmr.h:#define CONFIG_SYS_HZ (50000000 / 64) include/configs/mini2440.h:#define CONFIG_SYS_HZ 1562500
include/configs/mx1ads.h:#define CONFIG_SYS_HZ 3686400
include/configs/omap3_zoom2.h:#define CONFIG_SYS_HZ ((V_SCLK) / (2 << CONFIG_SYS_PTV)) include/configs/omap730p2.h:#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) include/configs/rsk7203.h:#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER) include/configs/rsk7264.h:#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER) include/configs/rsk7269.h:#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
include/configs/scb9328.h:#define CONFIG_SYS_HZ 3686400
/* incrementer freq: 3.6864 MHz */
include/configs/versatile.h:#define CONFIG_SYS_HZ
(1000000 / 256)
Rob
PATCH 1/1 config: consolidate CONFIG_SYS_HZ definition
Dear Rob,
Quoted 2 lines · In message <[email protected]> you wrote:
What do I do with current boards that are wrong? I should make all these
Good question...
Quoted 26 lines
boards have build errors or fix them to use 1000 which may break them at runtime depending on their possible misuse of
CONFIG_SYS_HZ?include/configs/KAREF.h:#define
CONFIG_SYS_HZ100/* decr freq: 1 ms ticks */include/configs/M5271EVB.h:#define
CONFIG_SYS_HZ1000000
include/configs/METROBOX.h:#defineCONFIG_SYS_HZ
100 /* decr freq: 1 ms ticks */
include/configs/MVBLUE.h:#defineCONFIG_SYS_HZ10000
include/configs/idmr.h:#defineCONFIG_SYS_HZ(50000000 / 64) include/configs/mini2440.h:#defineCONFIG_SYS_HZ1562500
include/configs/mx1ads.h:#defineCONFIG_SYS_HZ3686400
include/configs/omap3_zoom2.h:#defineCONFIG_SYS_HZ((V_SCLK) / (2 <<CONFIG_SYS_PTV)) include/configs/omap730p2.h:#defineCONFIG_SYS_HZ((CONFIG_SYS_CLK_FREQ)/(2 <<CONFIG_SYS_PTV)) include/configs/rsk7203.h:#defineCONFIG_SYS_HZ(CONFIG_SYS_CLK_FREQ/CMT_CLK_DIVIDER) include/configs/rsk7264.h:#defineCONFIG_SYS_HZ(CONFIG_SYS_CLK_FREQ/CMT_CLK_DIVIDER) include/configs/rsk7269.h:#defineCONFIG_SYS_HZ(CONFIG_SYS_CLK_FREQ/CMT_CLK_DIVIDER)
include/configs/scb9328.h:#defineCONFIG_SYS_HZ3686400
Quoted 3 lines
/* incrementer freq: 3.6864 MHz */include/configs/versatile.h:#define
CONFIG_SYS_HZ
(1000000 / 256)
Hm... which of these boards are actually still being maintained?
KAREF and METROBOX are PPC systems, and the comment suggests that the value is actually just a typo. Here it should be harmless to change this to use 1000 Hz instead. Ditto probably for MVBLUE. The rest might actually be dead?
Guess we should have their builds break and make the board maintainers fix them. If they don't (because the boards are unmaintained), we will drop the board code from the repo.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de There's nothing disgusting about it [the Companion]. It's just another life form, that's all. You get used to those things.
-- McCoy, "Metamorphosis", stardate 3219.8
PATCH 1/1 config: consolidate CONFIG_SYS_HZ definition
Quoted 40 lines · Wolfgang Denk
Dear Rob,
Quoted 2 lines · In message <[email protected]> you wrote:
What do I do with current boards that are wrong? I should make all these
Good question...
Quoted 26 lines
boards have build errors or fix them to use 1000 which may break them at runtime depending on their possible misuse of
CONFIG_SYS_HZ?include/configs/KAREF.h:#define
CONFIG_SYS_HZ100/* decr freq: 1 ms ticks */include/configs/M5271EVB.h:#define
CONFIG_SYS_HZ1000000
include/configs/METROBOX.h:#defineCONFIG_SYS_HZ
100 /* decr freq: 1 ms ticks */
include/configs/MVBLUE.h:#defineCONFIG_SYS_HZ10000
include/configs/idmr.h:#defineCONFIG_SYS_HZ(50000000 / 64) include/configs/mini2440.h:#defineCONFIG_SYS_HZ1562500
include/configs/mx1ads.h:#defineCONFIG_SYS_HZ3686400
include/configs/omap3_zoom2.h:#defineCONFIG_SYS_HZ((V_SCLK) / (2 <<CONFIG_SYS_PTV)) include/configs/omap730p2.h:#defineCONFIG_SYS_HZ((CONFIG_SYS_CLK_FREQ)/(2 <<CONFIG_SYS_PTV)) include/configs/rsk7203.h:#defineCONFIG_SYS_HZ(CONFIG_SYS_CLK_FREQ/CMT_CLK_DIVIDER) include/configs/rsk7264.h:#defineCONFIG_SYS_HZ(CONFIG_SYS_CLK_FREQ/CMT_CLK_DIVIDER) include/configs/rsk7269.h:#defineCONFIG_SYS_HZ(CONFIG_SYS_CLK_FREQ/CMT_CLK_DIVIDER)
include/configs/scb9328.h:#defineCONFIG_SYS_HZ3686400Quoted 3 lines
/* incrementer freq: 3.6864 MHz */include/configs/versatile.h:#define
CONFIG_SYS_HZ
(1000000 / 256)Hm... which of these boards are actually still being maintained?
Quoted 8 lines
KAREF and METROBOX are PPC systems, and the comment suggests that the value is actually just a typo. Here it should be harmless to change this to use 1000 Hz instead. Ditto probably for MVBLUE. The rest might actually be dead?
Guess we should have their builds break and make the board maintainers fix them. If they don't (because the boards are unmaintained), we will drop the board code from the repo.
Actually breaking them will cause hell on the folks building everything. Lets correct the ones we can correct easily and poke maintainers for the rest so we know what we can/should move to orphaned or just drop.
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130919/17f26ac2/attachment.pgp>
PATCH 1/1 config: consolidate CONFIG_SYS_HZ definition
Quoted 46 lines · Tom Rini
Quoted 45 lines · Wolfgang Denk
Dear Rob,
Quoted 2 lines · In message <[email protected]> you wrote:
What do I do with current boards that are wrong? I should make all these
Good question...
Quoted 26 lines
boards have build errors or fix them to use 1000 which may break them at runtime depending on their possible misuse of
CONFIG_SYS_HZ?include/configs/KAREF.h:#define
CONFIG_SYS_HZ100/* decr freq: 1 ms ticks */include/configs/M5271EVB.h:#define
CONFIG_SYS_HZ1000000
include/configs/METROBOX.h:#defineCONFIG_SYS_HZ
100 /* decr freq: 1 ms ticks */
include/configs/MVBLUE.h:#defineCONFIG_SYS_HZ10000
include/configs/idmr.h:#defineCONFIG_SYS_HZ(50000000 / 64) include/configs/mini2440.h:#defineCONFIG_SYS_HZ1562500
include/configs/mx1ads.h:#defineCONFIG_SYS_HZ3686400
include/configs/omap3_zoom2.h:#defineCONFIG_SYS_HZ((V_SCLK) / (2 <<CONFIG_SYS_PTV)) include/configs/omap730p2.h:#defineCONFIG_SYS_HZ((CONFIG_SYS_CLK_FREQ)/(2 <<CONFIG_SYS_PTV)) include/configs/rsk7203.h:#defineCONFIG_SYS_HZ(CONFIG_SYS_CLK_FREQ/CMT_CLK_DIVIDER) include/configs/rsk7264.h:#defineCONFIG_SYS_HZ(CONFIG_SYS_CLK_FREQ/CMT_CLK_DIVIDER) include/configs/rsk7269.h:#defineCONFIG_SYS_HZ(CONFIG_SYS_CLK_FREQ/CMT_CLK_DIVIDER)
include/configs/scb9328.h:#defineCONFIG_SYS_HZ3686400Quoted 3 lines
/* incrementer freq: 3.6864 MHz */include/configs/versatile.h:#define
CONFIG_SYS_HZ
(1000000 / 256)Hm... which of these boards are actually still being maintained?
KAREF and METROBOX are PPC systems, and the comment suggests that the value is actually just a typo. Here it should be harmless to change this to use 1000 Hz instead. Ditto probably for MVBLUE. The rest might actually be dead?
Quoted 7 lines
Quoted 3 lines
Guess we should have their builds break and make the board maintainers fix them. If they don't (because the boards are unmaintained), we will drop the board code from the repo.
Actually breaking them will cause hell on the folks building everything. Lets correct the ones we can correct easily and poke maintainers for the rest so we know what we can/should move to orphaned or just drop.
How about just a warning instead? Here's an updated list which missed some:
include/configs/M5271EVB.h:#define CONFIG_SYS_HZ 1000000
include/configs/balloon3.h:#define CONFIG_SYS_HZ
3250000 /* Timer @ 3250000 Hz */
include/configs/idmr.h:#define CONFIG_SYS_HZ (50000000 / 64)
include/configs/mini2440.h:#define CONFIG_SYS_HZ 1562500
include/configs/mx1ads.h:#define CONFIG_SYS_HZ 3686400
include/configs/omap3_zoom2.h:#define CONFIG_SYS_HZ
((V_SCLK) / (2 << CONFIG_SYS_PTV))
include/configs/omap730p2.h:#define CONFIG_SYS_HZ
((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV))
include/configs/palmld.h:#define CONFIG_SYS_HZ
3250000 /* Timer @ 3250000 Hz */
include/configs/palmtc.h:#define CONFIG_SYS_HZ
3686400 /* Timer @ 3686400 Hz */
include/configs/rsk7203.h:#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER) include/configs/rsk7264.h:#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER) include/configs/rsk7269.h:#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER) include/configs/scb9328.h:#define CONFIG_SYS_HZ
3686400 /* incrementer freq: 3.6864 MHz */
include/configs/versatile.h:#define CONFIG_SYS_HZ
(1000000 / 256)
include/configs/zipitz2.h:#define CONFIG_SYS_HZ
3250000 /* Timer @ 3250000 Hz */
Rob
PATCH 1/1 config: consolidate CONFIG_SYS_HZ definition
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 75 lines · Rob Herring
Quoted 46 lines · Tom Rini
Quoted 45 lines · Wolfgang Denk
Dear Rob,
Quoted 2 lines · In message <[email protected]> you wrote:
What do I do with current boards that are wrong? I should make all these
Good question...
Quoted 26 lines
boards have build errors or fix them to use 1000 which may break them at runtime depending on their possible misuse of
CONFIG_SYS_HZ?include/configs/KAREF.h:#define
CONFIG_SYS_HZ100/* decr freq: 1 ms ticks */include/configs/M5271EVB.h:#define
CONFIG_SYS_HZ1000000
include/configs/METROBOX.h:#defineCONFIG_SYS_HZ
100 /* decr freq: 1 ms ticks */
include/configs/MVBLUE.h:#defineCONFIG_SYS_HZ10000
include/configs/idmr.h:#defineCONFIG_SYS_HZ(50000000 / 64) include/configs/mini2440.h:#defineCONFIG_SYS_HZ1562500
include/configs/mx1ads.h:#defineCONFIG_SYS_HZ3686400
include/configs/omap3_zoom2.h:#defineCONFIG_SYS_HZ((V_SCLK) / (2 <<CONFIG_SYS_PTV)) include/configs/omap730p2.h:#defineCONFIG_SYS_HZ((CONFIG_SYS_CLK_FREQ)/(2 <<CONFIG_SYS_PTV)) include/configs/rsk7203.h:#defineCONFIG_SYS_HZ(CONFIG_SYS_CLK_FREQ/CMT_CLK_DIVIDER) include/configs/rsk7264.h:#defineCONFIG_SYS_HZ(CONFIG_SYS_CLK_FREQ/CMT_CLK_DIVIDER) include/configs/rsk7269.h:#defineCONFIG_SYS_HZ(CONFIG_SYS_CLK_FREQ/CMT_CLK_DIVIDER)
include/configs/scb9328.h:#defineCONFIG_SYS_HZ3686400Quoted 3 lines
/* incrementer freq: 3.6864 MHz */include/configs/versatile.h:#define
CONFIG_SYS_HZ
(1000000 / 256)Hm... which of these boards are actually still being maintained?
KAREF and METROBOX are PPC systems, and the comment suggests that the value is actually just a typo. Here it should be harmless to change this to use 1000 Hz instead. Ditto probably for MVBLUE. The rest might actually be dead?
Quoted 7 lines
Quoted 3 lines
Guess we should have their builds break and make the board maintainers fix them. If they don't (because the boards are unmaintained), we will drop the board code from the repo.
Actually breaking them will cause hell on the folks building everything. Lets correct the ones we can correct easily and poke maintainers for the rest so we know what we can/should move to orphaned or just drop.
How about just a warning instead? Here's an updated list which missed some:
include/configs/M5271EVB.h:#define
CONFIG_SYS_HZ1000000
include/configs/balloon3.h:#defineCONFIG_SYS_HZ
3250000 /* Timer @ 3250000 Hz */
include/configs/idmr.h:#defineCONFIG_SYS_HZ(50000000 / 64)
include/configs/mini2440.h:#defineCONFIG_SYS_HZ1562500
include/configs/mx1ads.h:#defineCONFIG_SYS_HZ3686400
include/configs/omap3_zoom2.h:#defineCONFIG_SYS_HZ
((V_SCLK) / (2 <<CONFIG_SYS_PTV))
include/configs/omap730p2.h:#defineCONFIG_SYS_HZ
((CONFIG_SYS_CLK_FREQ)/(2 <<CONFIG_SYS_PTV))
include/configs/palmld.h:#defineCONFIG_SYS_HZ
3250000 /* Timer @ 3250000 Hz */
include/configs/palmtc.h:#defineCONFIG_SYS_HZ
3686400 /* Timer @ 3686400 Hz */
include/configs/rsk7203.h:#defineCONFIG_SYS_HZ(CONFIG_SYS_CLK_FREQ/CMT_CLK_DIVIDER) include/configs/rsk7264.h:#defineCONFIG_SYS_HZ(CONFIG_SYS_CLK_FREQ/CMT_CLK_DIVIDER)
Quoted 8 lines
include/configs/rsk7269.h:#define
CONFIG_SYS_HZ
(CONFIG_SYS_CLK_FREQ/CMT_CLK_DIVIDER)
include/configs/scb9328.h:#defineCONFIG_SYS_HZ
3686400 /* incrementer freq: 3.6864 MHz */
include/configs/versatile.h:#defineCONFIG_SYS_HZ
(1000000 / 256)
include/configs/zipitz2.h:#defineCONFIG_SYS_HZ
3250000 /* Timer @ 3250000 Hz */
I could live with that I think.
- --
Tom
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
iQIcBAEBAgAGBQJSO3cBAAoJENk4IS6UOR1W0I4P/0l+rxS4C6tiFmCIQo9Wtf2i owKufT+cvGsQCtzbH84g3gUR/0bLE+FTAslYLyZ8DptFqlpOnOtc+pHqlOVgWZAp R1mZyVz1jU+8bRkieDFb6tv6PFGcXAkcC37epKlVk6b9A0vJnm6xEXQ1Hwb7XGhG j5DZ8KeUXWYyGcn5SYY5wRMztWcfQMMZ8MQVbioD8LE2vh7E2QnWBio168yfUS8l rbvxoykj6fxikYCWcdlr7ov7adzCa+nmwc4u0qxXzXro5Nm0uZ98FnJSj0HmuaS0 ISG0VMO+E6BnBFOBhwYbAgKgSFvTdxM8yo5lU66UuzVwVYvqqANbHhAR0I+8e4v4 k8jlouvUcFuQycWAotZopfqPnHMpDx51UYEjIcgw+MvCc9KqIH07epDOKuq4TLgn tGrM2N6HyX+ofKjKB1r6zRrqECzbGu8E5fAZNf/JrNgUTbfFRhmMvLFJ7F99ZUb+ chjveTUsY2yCmadgwxrQjOTLBn9MCabFqkm/mGweN+EjjAKJ25aE+JgIj2izYLal B1AzToq8YmAHJcFne6FJX3n2DUPKJ0BahvOkGjos9/jJjJdMI0bZw1x/As0ea6ZO NPKgewt5F7/uyhFe+B4wyi9xCgamR/ICGwS/K/ooIxB6rs+M17bb+PiV6QbX1DV4 imnvmPivTmbhQ/mGMM6c
=+vhz
-----END PGP SIGNATURE-----
PATCH v2 1/1 config: consolidate CONFIG_SYS_HZ definition
In reply to Rob HerringFrom: Rob Herring <[email protected]>
According to the README, CONFIG_SYS_HZ must be 1000 and most platforms follow that. Remove CONFIG_SYS_HZ from all these platforms and provide a common definition. The platforms which use a value other than 1000 are untouched and will get build errors. These configs are:
include/configs/M5271EVB.h:#define CONFIG_SYS_HZ 1000000
include/configs/balloon3.h:#define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */
include/configs/idmr.h:#define CONFIG_SYS_HZ (50000000 / 64)
include/configs/mini2440.h:#define CONFIG_SYS_HZ 1562500
include/configs/mx1ads.h:#define CONFIG_SYS_HZ 3686400
include/configs/omap3_zoom2.h:#define CONFIG_SYS_HZ ((V_SCLK) / (2 << CONFIG_SYS_PTV)) include/configs/omap730p2.h:#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) include/configs/palmld.h:#define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */ include/configs/palmtc.h:#define CONFIG_SYS_HZ 3686400 /* Timer @ 3686400 Hz */
include/configs/rsk7203.h:#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
include/configs/rsk7264.h:#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
include/configs/rsk7269.h:#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
include/configs/scb9328.h:#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
include/configs/versatile.h:#define CONFIG_SYS_HZ (1000000 / 256)
include/configs/zipitz2.h:#define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */
---
v2:
- Add warning for boards defining CONFIG_SYS_HZ. Boards using value other than 1000 will now generate warnings.
- Change KAREF, METROBOX, and MVBLUE to use 1000. Appeared to be a typo.
- Convert a few more boards to remove CONFIG_SYS_HZ that were missed in v1.
arch/arm/include/asm/arch-lpc32xx/config.h | 3 --- arch/blackfin/include/asm/config.h | 7 ------- include/config_fallbacks.h | 5 +++++ include/configs/A3000.h | 1 - include/configs/APC405.h | 2 -- include/configs/AR405.h | 2 -- include/configs/ASH405.h | 2 -- include/configs/Adder.h | 2 -- include/configs/B4860QDS.h | 1 - include/configs/BC3450.h | 2 -- include/configs/BSC9131RDB.h | 1 - include/configs/BSC9132QDS.h | 1 - include/configs/C29XPCIE.h | 1 - include/configs/CATcenter.h | 2 -- include/configs/CMS700.h | 2 -- include/configs/CPC45.h | 1 - include/configs/CPCI2DP.h | 2 -- include/configs/CPCI405.h | 2 -- include/configs/CPCI4052.h | 2 -- include/configs/CPCI405AB.h | 2 -- include/configs/CPCI405DT.h | 2 -- include/configs/CPCI750.h | 1 - include/configs/CPCIISER4.h | 2 -- include/configs/CPU86.h | 2 -- include/configs/CPU87.h | 2 -- include/configs/CRAYL1.h | 1 - include/configs/CU824.h | 1 - include/configs/DB64360.h | 1 - include/configs/DB64460.h | 1 - include/configs/DP405.h | 2 -- include/configs/DU405.h | 2 -- include/configs/DU440.h | 2 -- include/configs/ELPPC.h | 2 -- include/configs/ELPT860.h | 2 -- include/configs/EP88x.h | 2 -- include/configs/ESTEEM192E.h | 2 -- include/configs/EVB64260.h | 2 -- include/configs/EXBITGEN.h | 2 -- include/configs/FADS823.h | 2 -- include/configs/FADS850SAR.h | 2 -- include/configs/FLAGADM.h | 2 -- include/configs/FPS850L.h | 2 -- include/configs/FPS860L.h | 2 -- include/configs/G2000.h | 2 -- include/configs/GEN860T.h | 5 ----- include/configs/GENIETV.h | 2 -- include/configs/HH405.h | 2 -- include/configs/HIDDEN_DRAGON.h | 1 - include/configs/HUB405.h | 2 -- include/configs/HWW1U1A.h | 2 -- include/configs/ICU862.h | 2 -- include/configs/IDS8247.h | 2 -- include/configs/IP860.h | 2 -- include/configs/IPHASE4539.h | 2 -- include/configs/ISPAN.h | 2 -- include/configs/IVML24.h | 2 -- include/configs/IVMS8.h | 2 -- include/configs/IceCube.h | 2 -- include/configs/JSE.h | 2 -- include/configs/KAREF.h | 3 --- include/configs/KUP4K.h | 2 -- include/configs/KUP4X.h | 2 -- include/configs/M5208EVBE.h | 1 - include/configs/M52277EVB.h | 2 -- include/configs/M5235EVB.h | 1 - include/configs/M5249EVB.h | 2 -- include/configs/M5253DEMO.h | 2 -- include/configs/M5253EVBE.h | 2 -- include/configs/M5272C3.h | 1 - include/configs/M5275EVB.h | 1 - include/configs/M5282EVB.h | 1 - include/configs/M53017EVB.h | 1 - include/configs/M5329EVB.h | 1 - include/configs/M5373EVB.h | 1 - include/configs/M54418TWR.h | 2 -- include/configs/M54451EVB.h | 2 -- include/configs/M54455EVB.h | 2 -- include/configs/M5475EVB.h | 1 - include/configs/M5485EVB.h | 1 - include/configs/MBX.h | 2 -- include/configs/MBX860T.h | 2 -- include/configs/MERGERBOX.h | 1 - include/configs/METROBOX.h | 3 --- include/configs/MHPC.h | 2 -- include/configs/MIP405.h | 2 -- include/configs/MOUSSE.h | 1 - include/configs/MPC8260ADS.h | 2 -- include/configs/MPC8266ADS.h | 2 -- include/configs/MPC8308RDB.h | 1 - include/configs/MPC8313ERDB.h | 1 - include/configs/MPC8315ERDB.h | 1 - include/configs/MPC8323ERDB.h | 1 - include/configs/MPC832XEMDS.h | 1 - include/configs/MPC8349EMDS.h | 1 - include/configs/MPC8349ITX.h | 1 - include/configs/MPC8360EMDS.h | 1 - include/configs/MPC8360ERDK.h | 1 - include/configs/MPC837XEMDS.h | 1 - include/configs/MPC837XERDB.h | 1 - include/configs/MPC8536DS.h | 1 - include/configs/MPC8540ADS.h | 1 - include/configs/MPC8541CDS.h | 1 - include/configs/MPC8544DS.h | 1 - include/configs/MPC8548CDS.h | 1 - include/configs/MPC8555CDS.h | 1 - include/configs/MPC8560ADS.h | 1 - include/configs/MPC8568MDS.h | 1 - include/configs/MPC8569MDS.h | 1 - include/configs/MPC8572DS.h | 1 - include/configs/MPC8610HPCD.h | 1 - include/configs/MPC8641HPCN.h | 1 - include/configs/MUSENKI.h | 1 - include/configs/MVBC_P.h | 2 -- include/configs/MVBLM7.h | 1 - include/configs/MVBLUE.h | 1 - include/configs/MVS1.h | 2 -- include/configs/MVSMR.h | 2 -- include/configs/MigoR.h | 1 - include/configs/NETPHONE.h | 2 -- include/configs/NETTA.h | 2 -- include/configs/NETTA2.h | 2 -- include/configs/NETVIA.h | 2 -- include/configs/NSCU.h | 2 -- include/configs/NX823.h | 2 -- include/configs/OCRTC.h | 2 -- include/configs/ORSG.h | 2 -- include/configs/P1010RDB.h | 1 - include/configs/P1022DS.h | 1 - include/configs/P1023RDB.h | 1 - include/configs/P1023RDS.h | 1 - include/configs/P1_P2_RDB.h | 1 - include/configs/P2020COME.h | 1 - include/configs/P2020DS.h | 1 - include/configs/P2041RDB.h | 1 - include/configs/P3G4.h | 2 -- include/configs/PATI.h | 2 -- include/configs/PCI405.h | 2 -- include/configs/PCI5441.h | 1 - include/configs/PIP405.h | 2 -- include/configs/PK1C20.h | 1 - include/configs/PLU405.h | 2 -- include/configs/PM520.h | 2 -- include/configs/PM826.h | 2 -- include/configs/PM828.h | 2 -- include/configs/PMC405.h | 2 -- include/configs/PMC405DE.h | 2 -- include/configs/PMC440.h | 2 -- include/configs/PN62.h | 1 - include/configs/PPChameleonEVB.h | 2 -- include/configs/QS823.h | 2 -- include/configs/QS850.h | 2 -- include/configs/QS860T.h | 2 -- include/configs/R360MPI.h | 2 -- include/configs/RBC823.h | 2 -- include/configs/RPXClassic.h | 2 -- include/configs/RPXlite.h | 2 -- include/configs/RPXlite_DW.h | 2 -- include/configs/RPXsuper.h | 1 - include/configs/RRvision.h | 2 -- include/configs/Rattler.h | 2 -- include/configs/SIMPC8313.h | 1 - include/configs/SM850.h | 2 -- include/configs/SPD823TS.h | 2 -- include/configs/SXNI855T.h | 2 -- include/configs/Sandpoint8240.h | 1 - include/configs/Sandpoint8245.h | 1 - include/configs/TASREG.h | 2 -- include/configs/TB5200.h | 2 -- include/configs/TK885D.h | 2 -- include/configs/TOP5200.h | 2 -- include/configs/TOP860.h | 1 - include/configs/TQM5200.h | 2 -- include/configs/TQM823L.h | 2 -- include/configs/TQM823M.h | 2 -- include/configs/TQM8260.h | 2 -- include/configs/TQM8272.h | 2 -- include/configs/TQM834x.h | 1 - include/configs/TQM850L.h | 2 -- include/configs/TQM850M.h | 2 -- include/configs/TQM855L.h | 2 -- include/configs/TQM855M.h | 2 -- include/configs/TQM860L.h | 2 -- include/configs/TQM860M.h | 2 -- include/configs/TQM862L.h | 2 -- include/configs/TQM862M.h | 2 -- include/configs/TQM866M.h | 2 -- include/configs/TQM885D.h | 2 -- include/configs/Total5200.h | 2 -- include/configs/VCMA9.h | 1 - include/configs/VOH405.h | 2 -- include/configs/VOM405.h | 2 -- include/configs/VoVPN-GW.h | 1 - include/configs/W7OLMC.h | 2 -- include/configs/W7OLMG.h | 2 -- include/configs/WUH405.h | 2 -- include/configs/ZPC1900.h | 2 -- include/configs/ZUMA.h | 2 -- include/configs/a320evb.h | 1 - include/configs/a3m071.h | 1 - include/configs/a4m072.h | 2 -- include/configs/ac14xx.h | 3 --- include/configs/actux1.h | 1 - include/configs/actux2.h | 1 - include/configs/actux3.h | 1 - include/configs/actux4.h | 1 - include/configs/adp-ag101.h | 6 ------ include/configs/adp-ag101p.h | 6 ------ include/configs/adp-ag102.h | 6 ------ include/configs/aev.h | 2 -- include/configs/afeb9260.h | 1 - include/configs/alpr.h | 2 -- include/configs/am3517_crane.h | 1 - include/configs/am3517_evm.h | 1 - include/configs/am43xx_evm.h | 1 - include/configs/amcc-common.h | 2 -- include/configs/ap325rxa.h | 1 - include/configs/ap_sh4a_4a.h | 1 - include/configs/aria.h | 2 -- include/configs/armadillo-800eva.h | 1 - include/configs/arndale.h | 2 -- include/configs/astro_mcf5373l.h | 2 -- include/configs/at91rm9200ek.h | 1 - include/configs/at91sam9260ek.h | 1 - include/configs/at91sam9261ek.h | 1 - include/configs/at91sam9263ek.h | 1 - include/configs/at91sam9m10g45ek.h | 1 - include/configs/at91sam9n12ek.h | 1 - include/configs/at91sam9rlek.h | 1 - include/configs/at91sam9x5ek.h | 1 - include/configs/atc.h | 2 -- include/configs/atngw100.h | 2 -- include/configs/atngw100mkii.h | 6 ------ include/configs/atstk1002.h | 6 ------ include/configs/atstk1003.h | 6 ------ include/configs/atstk1004.h | 6 ------ include/configs/atstk1006.h | 5 ----- include/configs/calimain.h | 1 - include/configs/cam_enc_4xx.h | 1 - include/configs/canmb.h | 2 -- include/configs/cgtqmx6eval.h | 1 - include/configs/cm4008.h | 2 -- include/configs/cm41xx.h | 2 -- include/configs/cm5200.h | 1 - include/configs/cm_t35.h | 1 - include/configs/cmi_mpc5xx.h | 2 -- include/configs/cobra5272.h | 2 -- include/configs/cogent_mpc8260.h | 2 -- include/configs/cogent_mpc8xx.h | 2 -- include/configs/colibri_pxa270.h | 1 - include/configs/controlcenterd.h | 1 - include/configs/coreboot.h | 1 - include/configs/corenet_ds.h | 1 - include/configs/cpci5200.h | 2 -- include/configs/cpu9260.h | 1 - include/configs/cpuat91.h | 1 - include/configs/csb272.h | 2 -- include/configs/csb472.h | 1 - include/configs/da830evm.h | 1 - include/configs/da850evm.h | 1 - include/configs/davinci_dm355evm.h | 1 - include/configs/davinci_dm355leopard.h | 1 - include/configs/davinci_dm365evm.h | 1 - include/configs/davinci_dm6467evm.h | 1 - include/configs/davinci_dvevm.h | 1 - include/configs/davinci_schmoogie.h | 1 - include/configs/davinci_sffsdr.h | 1 - include/configs/davinci_sonata.h | 1 - include/configs/dbau1x00.h | 2 -- include/configs/debris.h | 1 - include/configs/devkit8000.h | 1 - include/configs/dig297.h | 1 - include/configs/digsy_mtc.h | 2 -- include/configs/dvlhost.h | 1 - include/configs/eXalion.h | 1 - include/configs/ea20.h | 1 - include/configs/eb_cpu5282.h | 1 - include/configs/eb_cpux9k2.h | 1 - include/configs/ecovec.h | 1 - include/configs/edminiv2.h | 2 -- include/configs/enbw_cmc.h | 1 - include/configs/ep8248.h | 2 -- include/configs/ep8260.h | 2 -- include/configs/ep82xxm.h | 2 -- include/configs/espt.h | 1 - include/configs/ethernut5.h | 1 - include/configs/exynos5250-dt.h | 2 -- include/configs/favr-32-ezkit.h | 6 ------ include/configs/flea3.h | 2 -- include/configs/galaxy5200.h | 1 - include/configs/gr_cpci_ax2000.h | 2 -- include/configs/gr_ep2s60.h | 2 -- include/configs/gr_xc3s_1500.h | 2 -- include/configs/grasshopper.h | 6 ------ include/configs/grsim.h | 2 -- include/configs/grsim_leon2.h | 2 -- include/configs/gw8260.h | 1 - include/configs/h2200.h | 2 -- include/configs/hammerhead.h | 2 -- include/configs/hawkboard.h | 1 - include/configs/hermes.h | 2 -- include/configs/highbank.h | 2 -- include/configs/hmi1001.h | 2 -- include/configs/hymod.h | 2 -- include/configs/igep0033.h | 1 - include/configs/igep00x0.h | 1 - include/configs/ima3-mx53.h | 1 - include/configs/imx27lite-common.h | 1 - include/configs/imx31_litekit.h | 2 -- include/configs/imx31_phycore.h | 2 -- include/configs/incaip.h | 2 -- include/configs/inka4x0.h | 2 -- include/configs/integrator-common.h | 1 - include/configs/ipam390.h | 1 - include/configs/ipek01.h | 1 - include/configs/jadecpu.h | 1 - include/configs/jornada.h | 1 - include/configs/jupiter.h | 2 -- include/configs/km/keymile-common.h | 2 -- include/configs/korat.h | 2 -- include/configs/kvme080.h | 1 - include/configs/kzm9g.h | 2 -- include/configs/linkstation.h | 1 - include/configs/lp8x4x.h | 5 ----- include/configs/lubbock.h | 1 - include/configs/lwmon.h | 2 -- include/configs/lwmon5.h | 2 -- include/configs/m53evk.h | 1 - include/configs/manroland/mpc5200-common.h | 2 -- include/configs/mcc200.h | 2 -- include/configs/mcx.h | 1 - include/configs/mecp5123.h | 2 -- include/configs/mecp5200.h | 2 -- include/configs/meesc.h | 1 - include/configs/microblaze-generic.h | 1 - include/configs/mimc200.h | 2 -- include/configs/motionpro.h | 2 -- include/configs/mpc5121ads.h | 1 - include/configs/mpc7448hpc2.h | 2 -- include/configs/mpc8308_p1m.h | 1 - include/configs/mpq101.h | 1 - include/configs/mpr2.h | 1 - include/configs/ms7720se.h | 1 - include/configs/ms7722se.h | 1 - include/configs/ms7750se.h | 1 - include/configs/muas3001.h | 2 -- include/configs/munices.h | 1 - include/configs/mv-common.h | 1 - include/configs/mx1ads.h | 1 - include/configs/mx25pdk.h | 1 - include/configs/mx31ads.h | 2 -- include/configs/mx31pdk.h | 2 -- include/configs/mx35pdk.h | 2 -- include/configs/mx51_efikamx.h | 1 - include/configs/mx51evk.h | 1 - include/configs/mx53ard.h | 1 - include/configs/mx53evk.h | 1 - include/configs/mx53loco.h | 1 - include/configs/mx53smd.h | 1 - include/configs/mx6qarm2.h | 1 - include/configs/mx6sabre_common.h | 1 - include/configs/mx6slevk.h | 1 - include/configs/mxs.h | 3 --- include/configs/nhk8815.h | 1 - include/configs/nios2-generic.h | 1 - include/configs/nitrogen6x.h | 1 - include/configs/nokia_rx51.h | 1 - include/configs/o2dnt-common.h | 1 - include/configs/omap1510inn.h | 1 - include/configs/omap3_beagle.h | 1 - include/configs/omap3_evm_common.h | 1 - include/configs/omap3_logic.h | 1 - include/configs/omap3_mvblx.h | 1 - include/configs/omap3_overo.h | 1 - include/configs/omap3_pandora.h | 1 - include/configs/omap3_sdp3430.h | 1 - include/configs/omap3_zoom1.h | 1 - include/configs/omap4_common.h | 1 - include/configs/omap5912osk.h | 1 - include/configs/openrisc-generic.h | 1 - include/configs/origen.h | 2 -- include/configs/otc570.h | 1 - include/configs/p1_p2_rdb_pc.h | 1 - include/configs/p1_twr.h | 1 - include/configs/p3mx.h | 2 -- include/configs/p3p440.h | 2 -- include/configs/palmtreo680.h | 1 - include/configs/pb1x00.h | 2 -- include/configs/pcm030.h | 1 - include/configs/pcm051.h | 1 - include/configs/pcs440ep.h | 2 -- include/configs/pdm360ng.h | 1 - include/configs/pdnb3.h | 1 - include/configs/pf5200.h | 2 -- include/configs/pm9261.h | 2 -- include/configs/pm9263.h | 2 -- include/configs/pm9g45.h | 1 - include/configs/ppmc7xx.h | 1 - include/configs/ppmc8260.h | 1 - include/configs/pxa255_idp.h | 1 - include/configs/qemu-malta.h | 1 - include/configs/qemu-mips.h | 2 -- include/configs/qemu-mips64.h | 2 -- include/configs/qong.h | 2 -- include/configs/quad100hd.h | 2 -- include/configs/quantum.h | 2 -- include/configs/r0p7734.h | 1 - include/configs/r2dplus.h | 1 - include/configs/r7780mp.h | 1 - include/configs/rpi_b.h | 3 --- include/configs/rsdproto.h | 2 -- include/configs/s5p_goni.h | 2 -- include/configs/s5pc210_universal.h | 2 -- include/configs/sacsng.h | 1 - include/configs/sama5d3xek.h | 1 - include/configs/sandbox.h | 2 -- include/configs/sbc35_a9g20.h | 1 - include/configs/sbc405.h | 2 -- include/configs/sbc8349.h | 1 - include/configs/sbc8548.h | 1 - include/configs/sbc8641d.h | 1 - include/configs/sc3.h | 2 -- include/configs/sh7752evb.h | 1 - include/configs/sh7757lcr.h | 1 - include/configs/sh7763rdp.h | 1 - include/configs/sh7785lcr.h | 1 - include/configs/shmin.h | 1 - include/configs/siemens-am33x-common.h | 2 -- include/configs/smdk2410.h | 2 -- include/configs/smdkc100.h | 2 -- include/configs/smdkv310.h | 2 -- include/configs/snapper9260.h | 1 - include/configs/snowball.h | 1 - include/configs/socfpga_cyclone5.h | 1 - include/configs/socrates.h | 1 - include/configs/spc1920.h | 2 -- include/configs/spear-common.h | 1 - include/configs/spieval.h | 2 -- include/configs/stamp9g20.h | 1 - include/configs/stxgp3.h | 1 - include/configs/stxssa.h | 1 - include/configs/stxxtc.h | 2 -- include/configs/svm_sc8xx.h | 2 -- include/configs/t4qds.h | 1 - include/configs/tam3517-common.h | 1 - include/configs/tb0229.h | 2 -- include/configs/tegra-common.h | 2 -- include/configs/ti814x_evm.h | 2 -- include/configs/ti816x_evm.h | 1 - include/configs/ti_armv7_common.h | 1 - include/configs/titanium.h | 1 - include/configs/tnetv107x_evm.h | 1 - include/configs/tny_a9260.h | 1 - include/configs/top9000.h | 1 - include/configs/trats.h | 2 -- include/configs/tricorder.h | 1 - include/configs/trizepsiv.h | 1 - include/configs/tt01.h | 2 -- include/configs/tx25.h | 1 - include/configs/u8500_href.h | 1 - include/configs/uc100.h | 2 -- include/configs/utx8245.h | 1 - include/configs/v37.h | 2 -- include/configs/v38b.h | 2 -- include/configs/vct.h | 1 - include/configs/ve8313.h | 1 - include/configs/vexpress_common.h | 1 - include/configs/vf610twr.h | 1 - include/configs/virtlab2.h | 2 -- include/configs/vision2.h | 1 - include/configs/vl_ma2sc.h | 1 - include/configs/vme8349.h | 1 - include/configs/vpac270.h | 1 - include/configs/wandboard.h | 1 - include/configs/woodburn_common.h | 3 --- include/configs/x600.h | 1 - include/configs/xaeniax.h | 1 - include/configs/xilinx-ppc.h | 1 - include/configs/xpedite1000.h | 1 - include/configs/xpedite517x.h | 1 - include/configs/xpedite520x.h | 1 - include/configs/xpedite537x.h | 1 - include/configs/xpedite550x.h | 1 - include/configs/zeus.h | 2 -- include/configs/zmx25.h | 1 - include/configs/zynq.h | 1 - 485 files changed, 5 insertions(+), 777 deletions(-)
arch/arm/include/asm/arch-lpc32xx/config.h +0 -3
@@ -15,9 +15,6 @@#define CONFIG_NR_DRAM_BANKS_MAX 2 -/* 1KHz clock tick */ -#define CONFIG_SYS_HZ 1000 -/* UART configuration */ #if (CONFIG_SYS_LPC32XX_UART >=3 ) && (CONFIG_SYS_LPC32XX_UART <=6 )#define CONFIG_SYS_NS16550_SERIAL
arch/blackfin/include/asm/config.h +0 -7
@@ -155,13 +155,6 @@#ifndef CONFIG_SYS_MAXARGS # define CONFIG_SYS_MAXARGS 16#endif -#if defined(CONFIG_SYS_HZ ) -# if (CONFIG_SYS_HZ !=1000 ) -# warning "CONFIG_SYS_HZ must always be 1000" -# endif -# undef CONFIG_SYS_HZ -#endif -#define CONFIG_SYS_HZ 1000/* Blackfin POST tests */ #ifdef CONFIG_POST_BSPEC1_GPIO_LEDS
include/config_fallbacks.h +5 -0
@@ -53,4 +53,9 @@#define HAVE_BLOCK_DEVICE #endif +#ifdef CONFIG_SYS_HZ +#warning "CONFIG_SYS_HZ must be 1000 and not be defined by platforms" +#endif +#define CONFIG_SYS_HZ 1000 +#endif /* __CONFIG_FALLBACKS_H */
include/configs/A3000.h +0 -1
@@ -168,7 +168,6 @@*/ #define CONFIG_SYS_CLK_FREQ 33333333/* external frequency to pll */ -#define CONFIG_SYS_HZ 1000/* Bit-field values for MCCR1. */
include/configs/APC405.h +0 -2
@@ -177,8 +177,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /* Only interrupt boot if space is pressed */
include/configs/AR405.h +0 -2
@@ -128,8 +128,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /*-----------------------------------------------------------------------
include/configs/ASH405.h +0 -2
@@ -123,8 +123,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1/* include version env variable */
include/configs/Adder.h +0 -2
@@ -82,8 +82,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* Default load address */ -#define CONFIG_SYS_HZ 1000/* Decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero) */
include/configs/B4860QDS.h +0 -1
@@ -725,7 +725,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks*/ /* * For booting Linux, the board info and command line data
include/configs/BC3450.h +0 -2
@@ -445,8 +445,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* dec freq: 1ms ticks */ -#define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB )# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */
include/configs/BSC9131RDB.h +0 -1
@@ -372,7 +372,6 @@ extern unsigned long get_sdram_size(void);/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/BSC9132QDS.h +0 -1
@@ -614,7 +614,6 @@ combinations. this should be removed later/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq:1ms ticks */ /*
include/configs/C29XPCIE.h +0 -1
@@ -401,7 +401,6 @@/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* dec freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/CATcenter.h +0 -2
@@ -185,8 +185,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /*-----------------------------------------------------------------------
include/configs/CMS700.h +0 -2
@@ -121,8 +121,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1/* include version env variable */
include/configs/CPC45.h +0 -1
@@ -180,7 +180,6 @@*/ #define CONFIG_SYS_CLK_FREQ 33000000 -#define CONFIG_SYS_HZ 1000/* Bit-field values for MCCR1.
include/configs/CPCI2DP.h +0 -2
@@ -111,8 +111,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_LOOPW 1/* enable loopw command */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
include/configs/CPCI405.h +0 -2
@@ -124,8 +124,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_LOOPW 1/* enable loopw command */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
include/configs/CPCI4052.h +0 -2
@@ -133,8 +133,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING /* add command line history */ #define CONFIG_LOOPW 1/* enable loopw command */
include/configs/CPCI405AB.h +0 -2
@@ -132,8 +132,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING /* add command line history */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
include/configs/CPCI405DT.h +0 -2
@@ -134,8 +134,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_LOOPW 1/* enable loopw command */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
include/configs/CPCI750.h +0 -1
@@ -219,7 +219,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00300000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decr freq: 1ms ticks */ #define CONFIG_SYS_BUS_CLK 133000000/* 133 MHz (CPU = 5*Bus = 666MHz) */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
include/configs/CPCIISER4.h +0 -2
@@ -111,8 +111,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /*-----------------------------------------------------------------------
include/configs/CPU86.h +0 -2
@@ -186,8 +186,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100/* "bad" address */ /*
include/configs/CPU87.h +0 -2
@@ -200,8 +200,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100/* "bad" address */ #define CONFIG_LOOPW
include/configs/CRAYL1.h +0 -1
@@ -70,7 +70,6 @@#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1#define CONFIG_IDENT_STRING "Cray L1"#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ #define CONFIG_SYS_HUSH_PARSER 1#define CONFIG_SOURCE 1
include/configs/CU824.h +0 -1
@@ -144,7 +144,6 @@*/ #define CONFIG_SYS_CLK_FREQ 33000000 -#define CONFIG_SYS_HZ 1000/* Bit-field values for MCCR1. */
include/configs/DB64360.h +0 -1
@@ -300,7 +300,6 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"#define CONFIG_SYS_LOAD_ADDR 0x00400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decr freq: 1ms ticks */ /*ronen - this the Sys clock (cpu bus,internal dram and SDRAM) */ #define CONFIG_SYS_BUS_CLK 133000000/* 133 MHz (CPU = 5*Bus = 666MHz) */
include/configs/DB64460.h +0 -1
@@ -238,7 +238,6 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"#define CONFIG_SYS_LOAD_ADDR 0x00400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decr freq: 1ms ticks */ /*ronen - this the Sys clock (cpu bus,internal dram and SDRAM) */ #define CONFIG_SYS_BUS_CLK 133000000/* 133 MHz (CPU = 5*Bus = 666MHz) */
include/configs/DP405.h +0 -2
@@ -98,8 +98,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1/* include version env variable */
include/configs/DU405.h +0 -2
@@ -115,8 +115,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_SYS_RX_ETH_BUFFER 16/* use 16 rx buffer on 405 emac */
include/configs/DU440.h +0 -2
@@ -327,8 +327,6 @@ int du440_phy_addr(int devnum);#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_LOOPW 1/* enable loopw command */ #define CONFIG_MX_CYCLIC 1/* enable mdc/mwc commands */
include/configs/ELPPC.h +0 -2
@@ -96,8 +96,6 @@#define CONFIG_SYS_LOAD_ADDR 0x1000000/* default load address */ -#define CONFIG_SYS_HZ 1000/* dec. freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }/*
include/configs/ELPT860.h +0 -2
@@ -120,8 +120,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Environment Variables and Storages */
include/configs/EP88x.h +0 -2
@@ -77,8 +77,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* Default load address */ -#define CONFIG_SYS_HZ 1000/* Decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero) */
include/configs/ESTEEM192E.h +0 -2
@@ -84,8 +84,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/EVB64260.h +0 -2
@@ -124,8 +124,6 @@#define CONFIG_SYS_MEMTEST_END 0x00C00000/* 4 ... 12 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x00300000/* default load address */ - -#define CONFIG_SYS_HZ 1000/* decr freq: 1ms ticks */ #define CONFIG_SYS_BUS_CLK 100000000/* 100 MHz */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
include/configs/EXBITGEN.h +0 -2
@@ -116,8 +116,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * PCI stuff *-----------------------------------------------------------------------
include/configs/FADS823.h +0 -2
@@ -152,8 +152,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/FADS850SAR.h +0 -2
@@ -98,8 +98,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/FLAGADM.h +0 -2
@@ -94,8 +94,6 @@#define CONFIG_SYS_LOAD_ADDR 0x40040000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/FPS850L.h +0 -2
@@ -130,8 +130,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/FPS860L.h +0 -2
@@ -130,8 +130,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/G2000.h +0 -2
@@ -150,8 +150,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_BOOTDELAY 3/* autoboot after 3 seconds */
include/configs/GEN860T.h +0 -5
@@ -310,11 +310,6 @@#define CONFIG_SYS_LOAD_ADDR 0x01000000/* -* Set decrementer frequency (1 ms ticks) -*/ -#define CONFIG_SYS_HZ 1000 - -/* * Device memory map (after SDRAM remap to 0x0): * * CS Device Base Addr Size
include/configs/GENIETV.h +0 -2
@@ -142,8 +142,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }/*
include/configs/HH405.h +0 -2
@@ -175,8 +175,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1/* include version env variable */
include/configs/HIDDEN_DRAGON.h +0 -1
@@ -70,7 +70,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ /*----------------------------------------------------------------------- * PCI stuff
include/configs/HUB405.h +0 -2
@@ -117,8 +117,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1/* include version env variable */
include/configs/HWW1U1A.h +0 -2
@@ -53,8 +53,6 @@/* Enable IRQs and watchdog with a 1000Hz system decrementer */ #define CONFIG_CMD_IRQ -#define CONFIG_SYS_HZ 1000 -/* -------------------------------------------------------------------- */
include/configs/ICU862.h +0 -2
@@ -153,8 +153,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00100000 -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/IDS8247.h +0 -2
@@ -196,8 +196,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC/* "bad" address */ /*
include/configs/IP860.h +0 -2
@@ -116,8 +116,6 @@#define CONFIG_SYS_PIO_MODE 0/* IDE interface in PIO Mode 0 */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/IPHASE4539.h +0 -2
@@ -154,8 +154,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_RESET_ADDRESS 0x04400000#define CONFIG_MISC_INIT_R 1/* We need misc_init_r() */
include/configs/ISPAN.h +0 -2
@@ -141,8 +141,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* Default load address */ -#define CONFIG_SYS_HZ 1000/* Decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_RESET_ADDRESS 0x09900000#define CONFIG_MISC_INIT_R /* We need misc_init_r() */
include/configs/IVML24.h +0 -2
@@ -111,8 +111,6 @@#define CONFIG_SYS_PC_ETH_RESET ((ushort)0x0010)/* PC 11 */ #define CONFIG_SYS_PC_IDE_RESET ((ushort)0x0020)/* PC 10 */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/IVMS8.h +0 -2
@@ -108,8 +108,6 @@#define CONFIG_SYS_PC_ETH_RESET ((ushort)0x0010)/* PC 11 */ #define CONFIG_SYS_PC_IDE_RESET ((ushort)0x0020)/* PC 10 */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/IceCube.h +0 -2
@@ -315,8 +315,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB )# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */
include/configs/JSE.h +0 -2
@@ -192,8 +192,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_PPC4XX #define CONFIG_SYS_I2C_PPC4XX_CH0
include/configs/KAREF.h +0 -3
@@ -283,7 +283,4 @@#define CONFIG_SYS_LOAD_ADDR 0x8000000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* use extended board_info */ -#define CONFIG_SYS_HZ 100/* decr freq: 1 ms ticks */ - -#endif /* __CONFIG_H */
include/configs/KUP4K.h +0 -2
@@ -172,8 +172,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 115200 }#define CONFIG_SYS_CONSOLE_INFO_QUIET 1
include/configs/KUP4X.h +0 -2
@@ -191,8 +191,6 @@#define CONFIG_SYS_MEMTEST_END 0x003C00000/* 4 ... 60 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x200000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 115200 }#define CONFIG_SYS_CONSOLE_INFO_QUIET 1
include/configs/M5208EVBE.h +0 -1
@@ -113,7 +113,6 @@#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Arg Buf Sz */ #define CONFIG_SYS_LOAD_ADDR 0x40010000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 166666666/* CPU Core Clock */ #define CONFIG_SYS_PLL_ODR 0x36#define CONFIG_SYS_PLL_FDR 0x7D
include/configs/M52277EVB.h +0 -2
@@ -176,8 +176,6 @@#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_MBAR 0xFC000000/*
include/configs/M5235EVB.h +0 -1
@@ -133,7 +133,6 @@#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE+0x20000) -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 75000000#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 2
include/configs/M5249EVB.h +0 -2
@@ -69,8 +69,6 @@#define CONFIG_SYS_MEMTEST_START 0x400#define CONFIG_SYS_MEMTEST_END 0x380000 -#define CONFIG_SYS_HZ 1000 -/* * Clock configuration: enable only one of the following options */
include/configs/M5253DEMO.h +0 -2
@@ -124,8 +124,6 @@ TABILITY or FITNESS FO04-2007 Freescale Semiconductor, Inc.#define CONFIG_SYS_MEMTEST_START 0x400#define CONFIG_SYS_MEMTEST_END 0x380000 -#define CONFIG_SYS_HZ 1000 -#undef CONFIG_SYS_PLL_BYPASS/* bypass PLL for test purpose */ #define CONFIG_SYS_FAST_CLK #ifdef CONFIG_SYS_FAST_CLK
include/configs/M5253EVBE.h +0 -2
@@ -93,8 +93,6 @@#define CONFIG_SYS_MEMTEST_START 0x400#define CONFIG_SYS_MEMTEST_END 0x380000 -#define CONFIG_SYS_HZ 1000 -#undef CONFIG_SYS_PLL_BYPASS/* bypass PLL for test purpose */ #define CONFIG_SYS_FAST_CLK #ifdef CONFIG_SYS_FAST_CLK
include/configs/M5272C3.h +0 -1
@@ -129,7 +129,6 @@#define CONFIG_SYS_LOAD_ADDR 0x20000#define CONFIG_SYS_MEMTEST_START 0x400#define CONFIG_SYS_MEMTEST_END 0x380000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 66000000/*
include/configs/M5275EVB.h +0 -1
@@ -139,7 +139,6 @@"save\0" \ "" -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 150000000/*
include/configs/M5282EVB.h +0 -1
@@ -117,7 +117,6 @@#define CONFIG_SYS_MEMTEST_START 0x400#define CONFIG_SYS_MEMTEST_END 0x380000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 64000000/* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */
include/configs/M53017EVB.h +0 -1
@@ -133,7 +133,6 @@#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Arg Buf Sz */ #define CONFIG_SYS_LOAD_ADDR 0x40010000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 80000000#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3
include/configs/M5329EVB.h +0 -1
@@ -126,7 +126,6 @@#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x40010000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 80000000#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3
include/configs/M5373EVB.h +0 -1
@@ -126,7 +126,6 @@#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x40010000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 80000000#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3
include/configs/M54418TWR.h +0 -2
@@ -253,8 +253,6 @@#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_MBAR 0xFC000000/*
include/configs/M54451EVB.h +0 -2
@@ -187,8 +187,6 @@#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_MBAR 0xFC000000/*
include/configs/M54455EVB.h +0 -2
@@ -246,8 +246,6 @@#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_MBAR 0xFC000000/*
include/configs/M5475EVB.h +0 -1
@@ -172,7 +172,6 @@#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00010000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK CONFIG_SYS_BUSCLK#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 2
include/configs/M5485EVB.h +0 -1
@@ -158,7 +158,6 @@#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00010000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK CONFIG_SYS_BUSCLK#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 2
include/configs/MBX.h +0 -2
@@ -98,8 +98,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/MBX860T.h +0 -2
@@ -72,8 +72,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/MERGERBOX.h +0 -1
@@ -367,7 +367,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000#define CONFIG_LOADS_ECHO 1#define CONFIG_SYS_LOADS_BAUD_CHANGE 1
include/configs/METROBOX.h +0 -3
@@ -348,7 +348,4 @@#define CONFIG_SYS_LOAD_ADDR 0x8000000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* use extended board_info */ -#define CONFIG_SYS_HZ 100/* decr freq: 1 ms ticks */ - -#endif /* __CONFIG_H */
include/configs/MHPC.h +0 -2
@@ -144,8 +144,6 @@#define CONFIG_SYS_LOAD_ADDR 0x300000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/MIP405.h +0 -2
@@ -180,8 +180,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * PCI stuff *-----------------------------------------------------------------------
include/configs/MOUSSE.h +0 -1
@@ -153,7 +153,6 @@#define CONFIG_SYS_CLK_FREQ 33000000/* external frequency to pll */ #define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 2 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_ETH_DEV_FN 0x00#define CONFIG_SYS_ETH_IOBASE 0x00104000
include/configs/MPC8260ADS.h +0 -2
@@ -287,8 +287,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }#define CONFIG_SYS_FLASH_BASE 0xff800000
include/configs/MPC8266ADS.h +0 -2
@@ -229,8 +229,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }#define CONFIG_SYS_FLASH_BASE 0xFE000000
include/configs/MPC8308RDB.h +0 -1
@@ -471,7 +471,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8313ERDB.h +0 -1
@@ -520,7 +520,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8315ERDB.h +0 -1
@@ -532,7 +532,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8323ERDB.h +0 -1
@@ -368,7 +368,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC832XEMDS.h +0 -1
@@ -454,7 +454,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8349EMDS.h +0 -1
@@ -520,7 +520,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8349ITX.h +0 -1
@@ -562,7 +562,6 @@ boards, we say we have two, but don't display a message if we find only one. */#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8360EMDS.h +0 -1
@@ -557,7 +557,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8360ERDK.h +0 -1
@@ -418,7 +418,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC837XEMDS.h +0 -1
@@ -536,7 +536,6 @@ extern int board_pci_host_broken(void);#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC837XERDB.h +0 -1
@@ -551,7 +551,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8536DS.h +0 -1
@@ -730,7 +730,6 @@ + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8540ADS.h +0 -1
@@ -387,7 +387,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8541CDS.h +0 -1
@@ -400,7 +400,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8544DS.h +0 -1
@@ -431,7 +431,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8548CDS.h +0 -1
@@ -525,7 +525,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8555CDS.h +0 -1
@@ -398,7 +398,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8560ADS.h +0 -1
@@ -428,7 +428,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8568MDS.h +0 -1
@@ -420,7 +420,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8569MDS.h +0 -1
@@ -556,7 +556,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_SYS_MAXARGS 32/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8572DS.h +0 -1
@@ -670,7 +670,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8610HPCD.h +0 -1
@@ -508,7 +508,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8641HPCN.h +0 -1
@@ -661,7 +661,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MUSENKI.h +0 -1
@@ -151,7 +151,6 @@*/ #define CONFIG_SYS_CLK_FREQ 33333333/* external frequency to pll */ -#define CONFIG_SYS_HZ 1000/* Bit-field values for MCCR1. */
include/configs/MVBC_P.h +0 -2
@@ -266,8 +266,6 @@#define CONFIG_SYS_MEMTEST_START 0x00800000#define CONFIG_SYS_MEMTEST_END 0x02f00000 -#define CONFIG_SYS_HZ 1000 -/* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x02000000/* default location for tftp and bootm */
include/configs/MVBLM7.h +0 -1
@@ -292,7 +292,6 @@ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* * For booting Linux, the board info and command line data
include/configs/MVBLUE.h +0 -1
@@ -209,7 +209,6 @@*/ #define CONFIG_SYS_CLK_FREQ 33000000 -#define CONFIG_SYS_HZ 10000/* Bit-field values for MCCR1. */ #define CONFIG_SYS_ROMNAL 7
include/configs/MVS1.h +0 -2
@@ -103,8 +103,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/MVSMR.h +0 -2
@@ -236,8 +236,6 @@#define CONFIG_SYS_MEMTEST_START 0x00800000#define CONFIG_SYS_MEMTEST_END 0x02f00000 -#define CONFIG_SYS_HZ 1000 -/* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x02000000/* default location for tftp and bootm */
include/configs/MigoR.h +0 -1
@@ -124,6 +124,5 @@/* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333#define CONFIG_SYS_TMU_CLK_DIV (4)/* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ 1000#endif /* __MIGO_R_H */
include/configs/NETPHONE.h +0 -2
@@ -136,8 +136,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/NETTA.h +0 -2
@@ -149,8 +149,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/NETTA2.h +0 -2
@@ -137,8 +137,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/NETVIA.h +0 -2
@@ -119,8 +119,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/NSCU.h +0 -2
@@ -138,8 +138,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/NX823.h +0 -2
@@ -83,8 +83,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/OCRTC.h +0 -2
@@ -107,8 +107,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /*-----------------------------------------------------------------------
include/configs/ORSG.h +0 -2
@@ -105,8 +105,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /*-----------------------------------------------------------------------
include/configs/P1010RDB.h +0 -1
@@ -675,7 +675,6 @@ extern unsigned long get_sdram_size(void);/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* dec freq: 1ms ticks */ /* * Internal Definitions
include/configs/P1022DS.h +0 -1
@@ -715,7 +715,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* * For booting Linux, the board info and command line data
include/configs/P1023RDB.h +0 -1
@@ -323,7 +323,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/P1023RDS.h +0 -1
@@ -459,7 +459,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/P1_P2_RDB.h +0 -1
@@ -596,7 +596,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/P2020COME.h +0 -1
@@ -422,7 +422,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms tick */ /* * For booting Linux, the board info and command line data
include/configs/P2020DS.h +0 -1
@@ -660,7 +660,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/P2041RDB.h +0 -1
@@ -667,7 +667,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/P3G4.h +0 -2
@@ -150,8 +150,6 @@#define CONFIG_SYS_MEMTEST_END 0x00C00000/* 4 ... 12 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x00300000/* default load address */ - -#define CONFIG_SYS_HZ 1000/* decr freq: 1ms ticks */ #define CONFIG_SYS_BUS_CLK 133000000/* 133 MHz */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
include/configs/PATI.h +0 -2
@@ -94,8 +94,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* Decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 1250000 }
include/configs/PCI405.h +0 -2
@@ -110,8 +110,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#undef CONFIG_ZERO_BOOTDELAY_CHECK/* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1/* include version env variable */
include/configs/PCI5441.h +0 -1
@@ -101,7 +101,6 @@* If the default period is acceptable, TMRCNT can be left undefined. * TMRMS represents the desired mecs per tick (msecs per interrupt). *----------------------------------------------------------------------*/ -#define CONFIG_SYS_HZ 1000/* Always 1000 */ #define CONFIG_SYS_LOW_RES_TIMER #define CONFIG_SYS_NIOS_TMRBASE 0x00920860/* Tick timer base addr */ #define CONFIG_SYS_NIOS_TMRIRQ 3/* Timer IRQ num */
include/configs/PIP405.h +0 -2
@@ -173,8 +173,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * PCI stuff *-----------------------------------------------------------------------
include/configs/PK1C20.h +0 -1
@@ -111,7 +111,6 @@* If the default period is acceptable, TMRCNT can be left undefined. * TMRMS represents the desired mecs per tick (msecs per interrupt). *----------------------------------------------------------------------*/ -#define CONFIG_SYS_HZ 1000/* Always 1000 */ #define CONFIG_SYS_LOW_RES_TIMER #define CONFIG_SYS_NIOS_TMRBASE 0x02120820/* Tick timer base addr */ #define CONFIG_SYS_NIOS_TMRIRQ 3/* Timer IRQ num */
include/configs/PLU405.h +0 -2
@@ -134,8 +134,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_BOOTDELAY 3/* autoboot after 3 seconds */
include/configs/PM520.h +0 -2
@@ -266,8 +266,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB )# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */
include/configs/PM826.h +0 -2
@@ -183,8 +183,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC/* "bad" address */ /*
include/configs/PM828.h +0 -2
@@ -183,8 +183,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC/* "bad" address */ /*
include/configs/PMC405.h +0 -2
@@ -128,8 +128,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_LOOPW 1/* enable loopw command */
include/configs/PMC405DE.h +0 -2
@@ -104,8 +104,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_LOOPW 1/* enable loopw command */ #define CONFIG_MX_CYCLIC 1/* enable mdc/mwc commands */
include/configs/PMC440.h +0 -2
@@ -388,8 +388,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_LOOPW 1/* enable loopw command */ #define CONFIG_MX_CYCLIC 1/* enable mdc/mwc commands */
include/configs/PN62.h +0 -1
@@ -92,7 +92,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ #define CONFIG_PRAM 1024/* reserve 1 MB protected RAM */
include/configs/PPChameleonEVB.h +0 -2
@@ -194,8 +194,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /*-----------------------------------------------------------------------
include/configs/QS823.h +0 -2
@@ -236,8 +236,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/QS850.h +0 -2
@@ -236,8 +236,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/QS860T.h +0 -2
@@ -146,8 +146,6 @@ CONFIG_SPI#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/R360MPI.h +0 -2
@@ -149,8 +149,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * JFFS2 partitions */
include/configs/RBC823.h +0 -2
@@ -134,8 +134,6 @@#define CONFIG_SYS_LOAD_ADDR 0x0100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/RPXClassic.h +0 -2
@@ -116,8 +116,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/RPXlite.h +0 -2
@@ -115,8 +115,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/RPXlite_DW.h +0 -2
@@ -162,8 +162,6 @@#define CONFIG_SYS_MEMTEST_END 0x00C0000/* 4 ... 12 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/RPXsuper.h +0 -1
@@ -214,7 +214,6 @@#define CONFIG_CLOCKS_IN_MHZ 1/* clocks passsed to Linux in MHz */ #define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ /* * Low Level Configuration Settings
include/configs/RRvision.h +0 -2
@@ -160,8 +160,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/Rattler.h +0 -2
@@ -170,8 +170,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }#define CONFIG_SYS_FLASH_BASE 0xFE000000
include/configs/SIMPC8313.h +0 -1
@@ -366,7 +366,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/SM850.h +0 -2
@@ -91,8 +91,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/SPD823TS.h +0 -2
@@ -103,8 +103,6 @@#define CONFIG_SYS_PC_IDE_RESET ((ushort)0x0008)/* PC 12 */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/SXNI855T.h +0 -2
@@ -170,8 +170,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00100000 -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/Sandpoint8240.h +0 -1
@@ -104,7 +104,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ /*----------------------------------------------------------------------- * PCI stuff
include/configs/Sandpoint8245.h +0 -1
@@ -72,7 +72,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ /*----------------------------------------------------------------------- * PCI stuff
include/configs/TASREG.h +0 -2
@@ -84,8 +84,6 @@#define CONFIG_SYS_MEMTEST_START 0x400#define CONFIG_SYS_MEMTEST_END 0x380000 -#define CONFIG_SYS_HZ 1000 -/* * Clock configuration: enable only one of the following options */
include/configs/TB5200.h +0 -2
@@ -410,8 +410,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Enable loopw command. */
include/configs/TK885D.h +0 -2
@@ -175,8 +175,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Enable loopw command. */
include/configs/TOP5200.h +0 -2
@@ -332,8 +332,6 @@#define CONFIG_SYS_LOAD_ADDR 0x200000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB )# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */
include/configs/TOP860.h +0 -1
@@ -68,7 +68,6 @@#define CONFIG_SYS_CPUCLOCK CONFIG_SYSCLK#define CONFIG_SYS_BRGCLOCK CONFIG_SYSCLK#define CONFIG_SYS_BUSCLOCK (CONFIG_SYSCLK >> CONFIG_EBDF) -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ #define CONFIG_8xx_GCLK_FREQ CONFIG_SYSCLK/*-----------------------------------------------------------------------
include/configs/TQM5200.h +0 -2
@@ -632,8 +632,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Enable loopw command. */
include/configs/TQM823L.h +0 -2
@@ -146,8 +146,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/TQM823M.h +0 -2
@@ -141,8 +141,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/TQM8260.h +0 -2
@@ -247,8 +247,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_RESET_ADDRESS 0xFFFFFFFC/* "bad" address */ /*
include/configs/TQM8272.h +0 -2
@@ -311,8 +311,6 @@#define CONFIG_SYS_LOAD_ADDR 0x300000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_RESET_ADDRESS 0x40000104/* "bad" address */ /*
include/configs/TQM834x.h +0 -1
@@ -334,7 +334,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ #undef CONFIG_WATCHDOG/* watchdog disabled */
include/configs/TQM850L.h +0 -2
@@ -130,8 +130,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/TQM850M.h +0 -2
@@ -131,8 +131,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/TQM855L.h +0 -2
@@ -134,8 +134,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/TQM855M.h +0 -2
@@ -164,8 +164,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/TQM860L.h +0 -2
@@ -133,8 +133,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/TQM860M.h +0 -2
@@ -134,8 +134,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/TQM862L.h +0 -2
@@ -137,8 +137,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/TQM862M.h +0 -2
@@ -137,8 +137,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/TQM866M.h +0 -2
@@ -177,8 +177,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/TQM885D.h +0 -2
@@ -173,8 +173,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Enable loopw command. */
include/configs/Total5200.h +0 -2
@@ -294,8 +294,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB )# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */
include/configs/VCMA9.h +0 -1
@@ -162,7 +162,6 @@#define CONFIG_SYS_LOAD_ADDR 0x30800000/* we configure PWM Timer 4 to 1ms 1000Hz */ -#define CONFIG_SYS_HZ 1000/* support additional compression methods */ #define CONFIG_BZIP2
include/configs/VOH405.h +0 -2
@@ -132,8 +132,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1/* include version env variable */
include/configs/VOM405.h +0 -2
@@ -119,8 +119,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
include/configs/VoVPN-GW.h +0 -1
@@ -232,7 +232,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00100000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_HZ 1000/* configure flash */ #define CONFIG_SYS_FLASH_BASE 0xff800000
include/configs/W7OLMC.h +0 -2
@@ -126,8 +126,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* use extended board_info (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * PCI stuff *-----------------------------------------------------------------------
include/configs/W7OLMG.h +0 -2
@@ -134,8 +134,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* use extended board_info (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * PCI stuff *-----------------------------------------------------------------------
include/configs/WUH405.h +0 -2
@@ -121,8 +121,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1/* include version env variable */
include/configs/ZPC1900.h +0 -2
@@ -154,8 +154,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }#define CONFIG_SYS_SDRAM_BASE 0x00000000
include/configs/ZUMA.h +0 -2
@@ -146,8 +146,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00300000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decr freq: 1ms ticks */ -#define CONFIG_SYS_BUS_CLK 133000000/* 133 MHz */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
include/configs/a320evb.h +0 -1
@@ -37,7 +37,6 @@/* * Timer */ -#define CONFIG_SYS_HZ 1000/* timer ticks per second */ /* * Real Time Clock
include/configs/a3m071.h +0 -1
@@ -265,7 +265,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00100000 -#define CONFIG_SYS_HZ 1000#define CONFIG_LOOPW #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup*/
include/configs/a4m072.h +0 -2
@@ -286,8 +286,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB )# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */
include/configs/ac14xx.h +0 -3
@@ -440,9 +440,6 @@/* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* decrementer freq: 1ms ticks */ -#define CONFIG_SYS_HZ 1000 -/* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is
include/configs/actux1.h +0 -1
@@ -79,7 +79,6 @@/* timer clock - 2* OSC_IN system clock */ #define CONFIG_IXP425_TIMER_CLK 66666666 -#define CONFIG_SYS_HZ 1000/* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x00010000
include/configs/actux2.h +0 -1
@@ -72,7 +72,6 @@/* timer clock - 2* OSC_IN system clock */ #define CONFIG_IXP425_TIMER_CLK 66666666 -#define CONFIG_SYS_HZ 1000/* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x00010000
include/configs/actux3.h +0 -1
@@ -70,7 +70,6 @@/* timer clock - 2* OSC_IN system clock */ #define CONFIG_IXP425_TIMER_CLK 66666666 -#define CONFIG_SYS_HZ 1000/* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x00010000
include/configs/actux4.h +0 -1
@@ -77,7 +77,6 @@/* timer clock - 2* OSC_IN system clock */ #define CONFIG_IXP425_TIMER_CLK 66000000 -#define CONFIG_SYS_HZ 1000/* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x00010000
include/configs/adp-ag101.h +0 -6
@@ -40,12 +40,6 @@/* * Timer */ - -/* -* According to the discussion in u-boot mailing list before, -* CONFIG_SYS_HZ at 1000 is mandatory. -*/ -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK_FREQ 48000000#define VERSION_CLOCK CONFIG_SYS_CLK_FREQ
include/configs/adp-ag101p.h +0 -6
@@ -40,12 +40,6 @@/* * Timer */ - -/* -* According to the discussion in u-boot mailing list before, -* CONFIG_SYS_HZ at 1000 is mandatory. -*/ -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK_FREQ 39062500#define VERSION_CLOCK CONFIG_SYS_CLK_FREQ
include/configs/adp-ag102.h +0 -6
@@ -32,12 +32,6 @@/* * Timer */ - -/* -* According to the discussion in u-boot mailing list before, -* CONFIG_SYS_HZ at 1000 is mandatory. -*/ -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK_FREQ (66000000 * 2)#define VERSION_CLOCK CONFIG_SYS_CLK_FREQ
include/configs/aev.h +0 -2
@@ -338,8 +338,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB )# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */
include/configs/afeb9260.h +0 -1
@@ -17,7 +17,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18429952/* from 18.432 MHz crystal */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_HZ 1000#define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO
include/configs/alpr.h +0 -2
@@ -255,8 +255,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_LOOPW 1/* enable loopw command */ #define CONFIG_MX_CYCLIC 1/* enable mdc/mwc commands */
include/configs/am3517_crane.h +0 -1
@@ -239,7 +239,6 @@*/ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/*----------------------------------------------------------------------- * Physical Memory Map
include/configs/am3517_evm.h +0 -1
@@ -231,7 +231,6 @@*/ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/*----------------------------------------------------------------------- * Physical Memory Map
include/configs/am43xx_evm.h +0 -1
@@ -75,7 +75,6 @@#define CONFIG_SYS_TIMERBASE 0x48040000/* Use Timer2 */ #define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/* NS16550 Configuration */ #define CONFIG_SYS_NS16550
include/configs/amcc-common.h +0 -2
@@ -90,8 +90,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_LOOPW /* enable loopw command */
include/configs/ap325rxa.h +0 -1
@@ -156,6 +156,5 @@/* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333#define CONFIG_SYS_TMU_CLK_DIV (4)/* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ 1000#endif /* __AP325RXA_H */
include/configs/ap_sh4a_4a.h +0 -1
@@ -159,6 +159,5 @@#define CONFIG_SYS_CLK_FREQ 44444444#endif #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000#endif /* __AP_SH4A_4A_H */
include/configs/aria.h +0 -2
@@ -485,8 +485,6 @@/* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 -/* * For booting Linux, the board info and command line data * have to be in the first 256 MB of memory, since this is
include/configs/armadillo-800eva.h +0 -1
@@ -139,6 +139,5 @@/* Board Clock */ #define CONFIG_SYS_CLK_FREQ 50000000#define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000#endif /* __ARMADILLO_800EVA_H */
include/configs/arndale.h +0 -2
@@ -144,8 +144,6 @@#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) -#define CONFIG_SYS_HZ 1000 -#define CONFIG_RD_LVL #define CONFIG_NR_DRAM_BANKS 8
include/configs/astro_mcf5373l.h +0 -2
@@ -110,10 +110,8 @@/* * Defines processor clock - important for correct timings concerning serial * interface etc. -* CONFIG_SYS_HZ gives unit: 1000 -> 1 Hz ^= 1000 ms */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 80000000#define CONFIG_SYS_CPU_CLK (CONFIG_SYS_CLK * 3)#define CONFIG_SYS_SDRAM_SIZE 32/* SDRAM size in MB */
include/configs/at91rm9200ek.h +0 -1
@@ -43,7 +43,6 @@#define AT91C_MAIN_CLOCK ((AT91C_XTAL_CLOCK / 4) * 39)#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3 )#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2) -#define CONFIG_SYS_HZ 1000/* CPU configuration */ #define CONFIG_AT91RM9200
include/configs/at91sam9260ek.h +0 -1
@@ -28,7 +28,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768/* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000/* main clock xtal */ -#define CONFIG_SYS_HZ 1000/* Define actual evaluation board type from used processor type */ #ifdef CONFIG_AT91SAM9G20
include/configs/at91sam9261ek.h +0 -1
@@ -14,7 +14,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768/* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000/* 18.432 MHz crystal */ -#define CONFIG_SYS_HZ 1000#ifdef CONFIG_AT91SAM9G10 #define CONFIG_AT91SAM9G10EK /* It's an Atmel AT91SAM9G10 EK*/
include/configs/at91sam9263ek.h +0 -1
@@ -26,7 +26,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16367660/* 16.367 MHz crystal */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_HZ 1000#define CONFIG_AT91SAM9263EK 1/* It's an AT91SAM9263EK Board */
include/configs/at91sam9m10g45ek.h +0 -1
@@ -21,7 +21,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000/* from 12 MHz crystal */ -#define CONFIG_SYS_HZ 1000#define CONFIG_AT91SAM9M10G45EK #define CONFIG_AT91FAMILY
include/configs/at91sam9n12ek.h +0 -1
@@ -24,7 +24,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768/* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* main clock xtal */ -#define CONFIG_SYS_HZ 1000/* Misc CPU related */ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
include/configs/at91sam9rlek.h +0 -1
@@ -18,7 +18,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768/* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000/* main clock xtal */ -#define CONFIG_SYS_HZ 1000#define CONFIG_AT91SAM9RLEK 1/* It's an AT91SAM9RLEK Board */
include/configs/at91sam9x5ek.h +0 -1
@@ -16,7 +16,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000/* 12 MHz crystal */ -#define CONFIG_SYS_HZ 1000#define CONFIG_AT91SAM9X5EK #define CONFIG_AT91FAMILY
include/configs/atc.h +0 -2
@@ -153,8 +153,6 @@#define CONFIG_SYS_PIO_MODE 0/* IDE interface in PIO Mode 0 */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100/* "bad" address */ #define CONFIG_SYS_ALLOC_DPRAM
include/configs/atngw100.h +0 -2
@@ -15,8 +15,6 @@#define CONFIG_AT32AP7000 #define CONFIG_ATNGW100 -#define CONFIG_SYS_HZ 1000 -/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
include/configs/atngw100mkii.h +0 -6
@@ -18,12 +18,6 @@#define CONFIG_ATNGW100MKII /* -* Timer clock frequency. We're using the CPU-internal COUNT register -* for this, so this is equivalent to the CPU core clock frequency -*/ -#define CONFIG_SYS_HZ 1000 - -/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency * and the PBA bus to run at 1/4 the PLL frequency.
include/configs/atstk1002.h +0 -6
@@ -17,12 +17,6 @@#define CONFIG_ATSTK1000 /* -* Timer clock frequency. We're using the CPU-internal COUNT register -* for this, so this is equivalent to the CPU core clock frequency -*/ -#define CONFIG_SYS_HZ 1000 - -/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the * PLL frequency.
include/configs/atstk1003.h +0 -6
@@ -17,12 +17,6 @@#define CONFIG_ATSTK1000 /* -* Timer clock frequency. We're using the CPU-internal COUNT register -* for this, so this is equivalent to the CPU core clock frequency -*/ -#define CONFIG_SYS_HZ 1000 - -/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the * PLL frequency.
include/configs/atstk1004.h +0 -6
@@ -17,12 +17,6 @@#define CONFIG_ATSTK1000 /* -* Timer clock frequency. We're using the CPU-internal COUNT register -* for this, so this is equivalent to the CPU core clock frequency -*/ -#define CONFIG_SYS_HZ 1000 - -/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the * PLL frequency.
include/configs/atstk1006.h +0 -5
@@ -16,11 +16,6 @@#define CONFIG_ATSTK1006 #define CONFIG_ATSTK1000 -/* -* Timer clock frequency. We're using the CPU-internal COUNT register -* for this, so this is equivalent to the CPU core clock frequency -*/ -#define CONFIG_SYS_HZ 1000/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
include/configs/calimain.h +0 -1
@@ -31,7 +31,6 @@#define CONFIG_SYS_OSCIN_FREQ calimain_get_osc_freq()#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_TEXT_BASE 0x60000000#define CONFIG_DA850_LOWLEVEL #define CONFIG_SYS_DA850_PLL_INIT
include/configs/cam_enc_4xx.h +0 -1
@@ -17,7 +17,6 @@#define CONFIG_ARM926EJS /* arm926ejs CPU */ #define CONFIG_SYS_TIMERBASE 0x01c21400/* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 24000000/* timer0 freq */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SOC_DM365 #define CONFIG_MACH_TYPE MACH_TYPE_DAVINCI_DM365_EVM
include/configs/canmb.h +0 -2
@@ -189,8 +189,6 @@#define CONFIG_SYS_LOAD_ADDR 0x200000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_RTC_MPC5200 1/* use internal MPC5200 RTC */ #define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */
include/configs/cgtqmx6eval.h +0 -1
@@ -143,7 +143,6 @@#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000#define CONFIG_CMDLINE_EDITING
include/configs/cm4008.h +0 -2
@@ -75,8 +75,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00008000/* default load address */ -#define CONFIG_SYS_HZ (1000)/* 1ms resolution ticks */ -/*----------------------------------------------------------------------- * Physical Memory Map */
include/configs/cm41xx.h +0 -2
@@ -75,8 +75,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00008000/* default load address */ -#define CONFIG_SYS_HZ (1000)/* 1ms resolution ticks */ -/*----------------------------------------------------------------------- * Physical Memory Map */
include/configs/cm5200.h +0 -1
@@ -296,7 +296,6 @@#define CONFIG_LOOPW 1#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ /* * Various low-level settings
include/configs/cm_t35.h +0 -1
@@ -258,7 +258,6 @@*/ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/*----------------------------------------------------------------------- * Physical Memory Map
include/configs/cmi_mpc5xx.h +0 -2
@@ -97,8 +97,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* Decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 1250000 }
include/configs/cobra5272.h +0 -2
@@ -37,11 +37,9 @@/* --- * Defines processor clock - important for correct timings concerning serial * interface etc. -* CONFIG_SYS_HZ gives unit: 1000 -> 1 Hz ^= 1000 ms * --- */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 66000000#define CONFIG_SYS_SDRAM_SIZE 16/* SDRAM size in MB */
include/configs/cogent_mpc8260.h +0 -2
@@ -139,8 +139,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }/*
include/configs/cogent_mpc8xx.h +0 -2
@@ -104,8 +104,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }#define CONFIG_SYS_ALLOC_DPRAM
include/configs/colibri_pxa270.h +0 -1
@@ -101,7 +101,6 @@/* * Clock Configuration */ -#define CONFIG_SYS_HZ 1000/* Timer @ 3250000 Hz */ #define CONFIG_SYS_CPUSPEED 0x290/* 520MHz */ /*
include/configs/controlcenterd.h +0 -1
@@ -440,7 +440,6 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_HZ 1000#define CONFIG_HW_WATCHDOG #define CONFIG_LOADS_ECHO #define CONFIG_SYS_LOADS_BAUD_CHANGE
include/configs/coreboot.h +0 -1
@@ -222,7 +222,6 @@#define CONFIG_SYS_MEMTEST_START 0x00100000#define CONFIG_SYS_MEMTEST_END 0x01000000#define CONFIG_SYS_LOAD_ADDR 0x100000 -#define CONFIG_SYS_HZ 1000/*----------------------------------------------------------------------- * SDRAM Configuration
include/configs/corenet_ds.h +0 -1
@@ -662,7 +662,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/cpci5200.h +0 -2
@@ -268,8 +268,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000/* Pass Ethernet MAC to VxWorks */ #define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */
include/configs/cpu9260.h +0 -1
@@ -20,7 +20,6 @@#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_AT91_SLOW_CLOCK 32768#if defined(CONFIG_CPU9G20 )
include/configs/cpuat91.h +0 -1
@@ -25,7 +25,6 @@#define AT91C_MAIN_CLOCK ((AT91C_XTAL_CLOCK / 4) * 39)#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3)#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2) -#define CONFIG_SYS_HZ 1000#define CONFIG_ARM920T #define CONFIG_AT91RM9200
include/configs/csb272.h +0 -2
@@ -121,8 +121,6 @@#define CONFIG_SYS_MEMTEST_START 0x0400000/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000/* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_info (bd_t) */ #define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */
include/configs/csb472.h +0 -1
@@ -121,7 +121,6 @@#define CONFIG_SYS_MEMTEST_START 0x0400000/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000/* 4 ... 12 MB in DRAM */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_info (bd_t) */ #define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */
include/configs/da830evm.h +0 -1
@@ -28,7 +28,6 @@#define CONFIG_SYS_OSCIN_FREQ 24000000#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_HZ 1000#define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_TEXT_BASE 0xc1080000
include/configs/da850evm.h +0 -1
@@ -33,7 +33,6 @@#define CONFIG_SYS_OSCIN_FREQ 24000000#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_DA850_PLL_INIT #define CONFIG_SYS_DA850_DDR_INIT
include/configs/davinci_dm355evm.h +0 -1
@@ -18,7 +18,6 @@#define CONFIG_ARM926EJS /* arm926ejs CPU */ #define CONFIG_SYS_TIMERBASE 0x01c21400/* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 24000000/* timer0 freq */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SOC_DM355 /* Memory Info */
include/configs/davinci_dm355leopard.h +0 -1
@@ -17,7 +17,6 @@#define CONFIG_ARM926EJS /* arm926ejs CPU */ #define CONFIG_SYS_TIMERBASE 0x01c21400/* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 24000000/* timer0 freq */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SOC_DM355 /* DM355 based board */ /* Memory Info */
include/configs/davinci_dm365evm.h +0 -1
@@ -18,7 +18,6 @@#define CONFIG_ARM926EJS /* arm926ejs CPU */ #define CONFIG_SYS_TIMERBASE 0x01c21400/* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 24000000/* timer0 freq */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SOC_DM365 /* Memory Info */
include/configs/davinci_dm6467evm.h +0 -1
@@ -27,7 +27,6 @@ extern unsigned int davinci_arm_clk_get(void);/* Timer Input clock freq */ #define CONFIG_SYS_HZ_CLOCK (CONFIG_SYS_CLK_FREQ/2)#define CONFIG_SYS_TIMERBASE 0x01c21400/* use timer 0 */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SOC_DM646X /* EEPROM definitions for EEPROM */
include/configs/davinci_dvevm.h +0 -1
@@ -44,7 +44,6 @@#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SYS_TIMERBASE 0x01c21400/* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000/* Timer Input clock freq */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SOC_DM644X /*====================================================*/ /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
include/configs/davinci_schmoogie.h +0 -1
@@ -22,7 +22,6 @@#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SYS_TIMERBASE 0x01c21400/* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000/* Timer Input clock freq */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SOC_DM644X /*=============*/ /* Memory Info */
include/configs/davinci_sffsdr.h +0 -1
@@ -19,7 +19,6 @@#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SYS_TIMERBASE 0x01c21400/* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000/* Timer Input clock freq */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SOC_DM644X /* EEPROM definitions for Atmel 24LC64 EEPROM chip */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
include/configs/davinci_sonata.h +0 -1
@@ -46,7 +46,6 @@#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SYS_TIMERBASE 0x01c21400/* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000/* Timer Input clock freq */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SOC_DM644X /*====================================================*/ /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
include/configs/dbau1x00.h +0 -2
@@ -133,8 +133,6 @@#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_SDRAM_BASE 0x80000000/* Cached addr */ #define CONFIG_SYS_LOAD_ADDR 0x81000000/* default load address */
include/configs/debris.h +0 -1
@@ -149,7 +149,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ /*----------------------------------------------------------------------- * PCI stuff
include/configs/devkit8000.h +0 -1
@@ -257,7 +257,6 @@*/ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2/* CS1 may or may not be populated */
include/configs/dig297.h +0 -1
@@ -239,7 +239,6 @@*/ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/*----------------------------------------------------------------------- * Physical Memory Map
include/configs/digsy_mtc.h +0 -2
@@ -416,8 +416,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00100000 -#define CONFIG_SYS_HZ 1000 -/* * Various low-level settings */
include/configs/dvlhost.h +0 -1
@@ -78,7 +78,6 @@/* timer clock - 2* OSC_IN system clock */ #define CONFIG_IXP425_TIMER_CLK 66666666 -#define CONFIG_SYS_HZ 1000/* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x00010000
include/configs/eXalion.h +0 -1
@@ -217,7 +217,6 @@* (address mappings, register initial values, etc.) * You should know what you are doing if you make changes here. */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK_FREQ 33333333/* external frequency to pll */ #define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 2/* for MPC8240 only */
include/configs/ea20.h +0 -1
@@ -35,7 +35,6 @@#define CONFIG_SYS_OSCIN_FREQ 24000000#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_HZ 1000#define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_TEXT_BASE 0xc1080000#define CONFIG_DA8XX_GPIO
include/configs/eb_cpu5282.h +0 -1
@@ -98,7 +98,6 @@/*----------------------------------------------------------------------* * Clock and PLL Configuration * *----------------------------------------------------------------------*/ -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 80000000/* 8MHz * 8 */ /* PLL Configuration: Ext Clock * 8 (see table 9-4 of MCF user manual) */
include/configs/eb_cpux9k2.h +0 -1
@@ -60,7 +60,6 @@#define AT91C_MAIN_CLOCK 179404800/* from 12.288 MHz * 73 / 5 */ #define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3) -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2)#define CONFIG_SYS_AT91_SLOW_CLOCK 32768/* slow clock */
include/configs/ecovec.h +0 -1
@@ -180,6 +180,5 @@/* Board Clock */ #define CONFIG_SYS_CLK_FREQ 41666666#define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000#endif /* __ECOVEC_H */
include/configs/edminiv2.h +0 -2
@@ -34,8 +34,6 @@* CLKs configurations */ -#define CONFIG_SYS_HZ 1000 -/* * Board-specific values for Orion5x MPP low level init: * - MPPs 12 to 15 are SATA LEDs (mode 5)
include/configs/enbw_cmc.h +0 -1
@@ -33,7 +33,6 @@#define CONFIG_SYS_OSCIN_FREQ 24000000#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_HZ 1000#define CONFIG_DA850_LOWLEVEL #define CONFIG_ARCH_CPU_INIT #define CONFIG_SYS_DA850_PLL_INIT
include/configs/ep8248.h +0 -2
@@ -154,8 +154,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }#define CONFIG_SYS_FLASH_BASE 0xFF800000
include/configs/ep8260.h +0 -2
@@ -359,8 +359,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/ep82xxm.h +0 -2
@@ -165,8 +165,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }/*-----------------------------------------------------------------------
include/configs/espt.h +0 -1
@@ -99,7 +99,6 @@/* Clock */ #define CONFIG_SYS_CLK_FREQ 66666666#define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000/* Ether */ #define CONFIG_SH_ETHER 1
include/configs/ethernut5.h +0 -1
@@ -31,7 +31,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768/* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000/* 18.432 MHz crystal */ -#define CONFIG_SYS_HZ 1000/* 32kB internal SRAM */ #define CONFIG_SRAM_BASE 0x00300000/*AT91SAM9XE_SRAM_BASE */
include/configs/exynos5250-dt.h +0 -2
@@ -177,8 +177,6 @@#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) -#define CONFIG_SYS_HZ 1000 -#define CONFIG_RD_LVL #define CONFIG_NR_DRAM_BANKS 8
include/configs/favr-32-ezkit.h +0 -6
@@ -18,12 +18,6 @@#define CONFIG_FAVR32_EZKIT_EXT_FLASH /* -* Timer clock frequency. We're using the CPU-internal COUNT register -* for this, so this is equivalent to the CPU core clock frequency -*/ -#define CONFIG_SYS_HZ 1000 - -/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the * PLL frequency.
include/configs/flea3.h +0 -2
@@ -130,8 +130,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 -/* * Physical Memory Map */
include/configs/galaxy5200.h +0 -1
@@ -352,7 +352,6 @@#define CONFIG_SYS_MEMTEST_END 0x00f00000/* 1 ... 15 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ #define CONFIG_DISPLAY_BOARDINFO 1
include/configs/gr_cpci_ax2000.h +0 -2
@@ -304,8 +304,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Various low-level settings */
include/configs/gr_ep2s60.h +0 -2
@@ -293,8 +293,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * USB stuff *-----------------------------------------------------------------------
include/configs/gr_xc3s_1500.h +0 -2
@@ -252,8 +252,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Various low-level settings */
include/configs/grasshopper.h +0 -6
@@ -16,12 +16,6 @@#define CONFIG_AT32AP7000 /* -* Timer clock frequency. We're using the CPU-internal COUNT register -* for this, so this is equivalent to the CPU core clock frequency -*/ -#define CONFIG_SYS_HZ 1000 - -/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the * PLL frequency.
include/configs/grsim.h +0 -2
@@ -279,8 +279,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/***** Gaisler GRLIB IP-Cores Config ********/ /* AMBA Plug & Play info display on startup */
include/configs/grsim_leon2.h +0 -2
@@ -277,8 +277,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/***** Gaisler GRLIB IP-Cores Config ********/ #define CONFIG_SYS_GRLIB_SDRAM 0
include/configs/gw8260.h +0 -1
@@ -352,7 +352,6 @@#define CONFIG_CLOCKS_IN_MHZ #define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ /* memtest works from the end of the exception vector table
include/configs/h2200.h +0 -2
@@ -17,8 +17,6 @@#define CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_HZ 1000 -#define CONFIG_NR_DRAM_BANKS 1#define PHYS_SDRAM_1 0xa0000000/* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x04000000/* 64 MB */
include/configs/hammerhead.h +0 -2
@@ -13,8 +13,6 @@#define CONFIG_AT32AP7000 #define CONFIG_HAMMERHEAD -#define CONFIG_SYS_HZ 1000 -/* * Set up the PLL to run at 125 MHz, the CPU to run at the PLL * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
include/configs/hawkboard.h +0 -1
@@ -28,7 +28,6 @@#define CONFIG_SYS_OSCIN_FREQ 24000000#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_HZ 1000#define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_AIS_CONFIG_FILE "board/$(BOARDDIR)/hawkboard-ais-nand.cfg"
include/configs/hermes.h +0 -2
@@ -87,8 +87,6 @@#define CONFIG_SYS_PIO_MODE 0/* IDE interface in PIO Mode 0 */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_ALLOC_DPRAM 1/* use allocation routines */ /* * Low Level Configuration Settings
include/configs/highbank.h +0 -2
@@ -12,8 +12,6 @@#define CONFIG_SYS_THUMB_BUILD #define CONFIG_SYS_NO_FLASH -#define CFG_HZ 1000 -#define CONFIG_SYS_HZ CFG_HZ#define CONFIG_OF_LIBFDT #define CONFIG_OF_BOARD_SETUP
include/configs/hmi1001.h +0 -2
@@ -237,8 +237,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Enable loopw command. */
include/configs/hymod.h +0 -2
@@ -271,8 +271,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }#define CONFIG_SYS_I2C_SPEED 50000
include/configs/igep0033.h +0 -1
@@ -144,7 +144,6 @@/* Platform/Board specific defs */ #define CONFIG_SYS_TIMERBASE 0x48040000/* Use Timer2 */ #define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/* 1ms clock */ /* NS16550 Configuration */ #define CONFIG_SYS_NS16550
include/configs/igep00x0.h +0 -1
@@ -238,7 +238,6 @@*/ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/* * Physical Memory Map
include/configs/ima3-mx53.h +0 -1
@@ -111,7 +111,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000#define CONFIG_CMDLINE_EDITING /* Physical Memory Map */
include/configs/imx27lite-common.h +0 -1
@@ -16,7 +16,6 @@#define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_MX27 #define CONFIG_MX27_CLK32 32768/* OSC32K frequency */ -#define CONFIG_SYS_HZ 1000#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_DISPLAY_CPUINFO
include/configs/imx31_litekit.h +0 -2
@@ -117,8 +117,6 @@#define CONFIG_SYS_LOAD_ADDR 0/* default load address */ -#define CONFIG_SYS_HZ 1000 -#define CONFIG_CMDLINE_EDITING 1/*-----------------------------------------------------------------------
include/configs/imx31_phycore.h +0 -2
@@ -121,8 +121,6 @@#define CONFIG_SYS_LOAD_ADDR 0/* default load address */ -#define CONFIG_SYS_HZ 1000 -#define CONFIG_CMDLINE_EDITING /*
include/configs/incaip.h +0 -2
@@ -106,8 +106,6 @@#define CONFIG_SYS_MIPS_TIMER_FREQ (incaip_get_cpuclk() / 2) -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_SDRAM_BASE 0x80000000#define CONFIG_SYS_LOAD_ADDR 0x80100000/* default load address */
include/configs/inka4x0.h +0 -2
@@ -348,8 +348,6 @@ static inline void tws_data_config_output(unsigned output)#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Enable loopw command. */
include/configs/integrator-common.h +0 -1
@@ -12,7 +12,6 @@#define CONFIG_SYS_TEXT_BASE 0x01000000#define CONFIG_SYS_MEMTEST_START 0x100000#define CONFIG_SYS_MEMTEST_END 0x10000000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_TIMERBASE 0x13000100/* Timer1 */ #define CONFIG_SYS_LOAD_ADDR 0x7fc0/* default load address */ #define CONFIG_SYS_LONGHELP
include/configs/ipam390.h +0 -1
@@ -33,7 +33,6 @@#define CONFIG_SYS_OSCIN_FREQ 24000000#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_DA850_PLL_INIT #define CONFIG_SYS_DA850_DDR_INIT #define CONFIG_SYS_TEXT_BASE 0xc1080000
include/configs/ipek01.h +0 -1
@@ -297,7 +297,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ #define CONFIG_LOOPW /*
include/configs/jadecpu.h +0 -1
@@ -12,7 +12,6 @@#define CONFIG_MB86R0x#define CONFIG_MB86R0x_IOCLK get_bus_freq(0) -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_TEXT_BASE 0x10000000#define CONFIG_ARM926EJS 1/* This is an ARM926EJS Core */
include/configs/jornada.h +0 -1
@@ -70,7 +70,6 @@#define CONFIG_SYS_BARGSIZE 256/* Boot Argument Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0xc0040000/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0xc2000000/* 4..128 MB */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CPUSPEED 0x0a/* core clock 206MHz */ #define CONFIG_SYS_BAUDRATE_TABLE { 19200, 38400, 57600, 115200 }
include/configs/jupiter.h +0 -2
@@ -262,8 +262,6 @@#define CONFIG_SYS_LOAD_ADDR 0x200000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB )# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */
include/configs/km/keymile-common.h +0 -2
@@ -54,8 +54,6 @@#define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */ -#define CONFIG_SYS_HZ 1000/* decr. freq: 1 ms ticks */ -#define CONFIG_BAUDRATE 115200#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
include/configs/korat.h +0 -2
@@ -324,8 +324,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_LOOPW 1/* enable loopw command */ #define CONFIG_MX_CYCLIC 1/* enable mdc/mwc commands */
include/configs/kvme080.h +0 -1
@@ -96,7 +96,6 @@#define CONFIG_SYS_MEMTEST_END 0x07C00000#define CONFIG_SYS_LOAD_ADDR 0x00100000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
include/configs/kzm9g.h +0 -2
@@ -126,8 +126,6 @@#define CONFIG_SYS_CLK_FREQ (48000000)#define CONFIG_SYS_CPU_CLK (1196000000)#define TMU_CLK_DIVIDER (4)/* 4 (default), 16, 64, 256 or 1024 */ -#define CFG_HZ (1000) -#define CONFIG_SYS_HZ CFG_HZ/* Ether */ #define CONFIG_NET_MULTI
include/configs/linkstation.h +0 -1
@@ -306,7 +306,6 @@/* FIXME: 32.768 MHz is the crystal frequency but */ /* the real frequency is lower by about 0.75% */ #define CONFIG_SYS_CLK_FREQ 32768000 -#define CONFIG_SYS_HZ 1000/* Bit-field values for MCCR1. */ #define CONFIG_SYS_ROMNAL 0
include/configs/lp8x4x.h +0 -5
@@ -117,11 +117,6 @@#define CONFIG_AUTO_COMPLETE 1/* -* Clock Configuration -*/ -#define CONFIG_SYS_HZ 1000/* Timer @ 3250000 Hz */ - -/* * DRAM Map */ #define CONFIG_NR_DRAM_BANKS 1/* 1 bank of DRAM */
include/configs/lubbock.h +0 -1
@@ -111,7 +111,6 @@#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DRAM_BASE + 0x8000)/* default load address */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CPUSPEED 0x161/* set core clock to 400/200/100 MHz */ #ifdef CONFIG_MMC
include/configs/lwmon.h +0 -2
@@ -213,8 +213,6 @@#define CONFIG_SYS_PIO_MODE 0/* IDE interface in PIO Mode 0 */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * When the watchdog is enabled, output must be fast enough in Linux. */
include/configs/lwmon5.h +0 -2
@@ -482,8 +482,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_LOOPW 1/* enable loopw command */ #define CONFIG_MX_CYCLIC 1/* enable mdc/mwc commands */
include/configs/m53evk.h +0 -1
@@ -10,7 +10,6 @@#define CONFIG_MX53 #define CONFIG_MXC_GPIO -#define CONFIG_SYS_HZ 1000#include <asm/arch/imx-regs.h>
include/configs/manroland/mpc5200-common.h +0 -2
@@ -143,8 +143,6 @@/*use Hardware WDT */ #define CONFIG_HW_WATCHDOG -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB )# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value*/
include/configs/mcc200.h +0 -2
@@ -303,8 +303,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB )# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */
include/configs/mcx.h +0 -1
@@ -303,7 +303,6 @@*/ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/* * Physical Memory Map
include/configs/mecp5123.h +0 -2
@@ -343,8 +343,6 @@/* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 -/* * For booting Linux, the board info and command line data * have to be in the first 256 MB of memory, since this is
include/configs/mecp5200.h +0 -2
@@ -250,8 +250,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000/* Pass Ethernet MAC to VxWorks */ #define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */
include/configs/meesc.h +0 -1
@@ -40,7 +40,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768/* 32.768 kHz crystal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */ -#define CONFIG_SYS_HZ 1000/* decrementer freq */ /* Misc CPU related */ #define CONFIG_SKIP_LOWLEVEL_INIT
include/configs/microblaze-generic.h +0 -1
@@ -399,7 +399,6 @@/* architecture dependent code */ #define CONFIG_SYS_USR_EXCEP /* user exception */ -#define CONFIG_SYS_HZ 1000#define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot;echo"
include/configs/mimc200.h +0 -2
@@ -17,8 +17,6 @@#define CONFIG_MIMC200_EXT_FLASH -#define CONFIG_SYS_HZ 1000 -/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
include/configs/motionpro.h +0 -2
@@ -380,8 +380,6 @@ extern void __led_set(led_id_t id, int state);#define CONFIG_SYS_LOAD_ADDR 0x200000/* default kernel load addr */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Various low-level settings */
include/configs/mpc5121ads.h +0 -1
@@ -498,7 +498,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/mpc7448hpc2.h +0 -2
@@ -187,8 +187,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decr freq: 1ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/mpc8308_p1m.h +0 -1
@@ -421,7 +421,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/mpq101.h +0 -1
@@ -334,7 +334,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/mpr2.h +0 -1
@@ -68,7 +68,6 @@/* Clocks */ #define CONFIG_SYS_CLK_FREQ 24000000#define CONFIG_SYS_TMU_CLK_DIV 4/* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ 1000/* UART */ #define CONFIG_SCIF_CONSOLE 1
include/configs/ms7720se.h +0 -1
@@ -86,7 +86,6 @@/* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333#define CONFIG_SYS_TMU_CLK_DIV 4/* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ 1000/* PCMCIA */ #define CONFIG_IDE_PCMCIA 1
include/configs/ms7722se.h +0 -1
@@ -112,6 +112,5 @@/* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333#define CONFIG_SYS_TMU_CLK_DIV (4)/* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ 1000#endif /* __MS7722SE_H */
include/configs/ms7750se.h +0 -1
@@ -83,6 +83,5 @@/* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333#define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000#endif /* __MS7750SE_H */
include/configs/muas3001.h +0 -2
@@ -196,8 +196,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }#define CONFIG_SYS_SDRAM_BASE 0x00000000
include/configs/munices.h +0 -1
@@ -176,7 +176,6 @@#define CONFIG_SYS_MEMTEST_END 0x00f00000/* 1 ... 15 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x200000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ #define CONFIG_DISPLAY_BOARDINFO 1#define CONFIG_CMDLINE_EDITING 1
include/configs/mv-common.h +0 -1
@@ -35,7 +35,6 @@/* * CLKs configurations */ -#define CONFIG_SYS_HZ 1000/* * NS16550 Configuration
include/configs/mx1ads.h +0 -1
@@ -114,7 +114,6 @@#define CONFIG_SYS_MEMTEST_END 0x0AF00000/* 63 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x08800000/* default load address */ -/*#define CONFIG_SYS_HZ 1000 */ #define CONFIG_SYS_HZ 3686400#define CONFIG_SYS_CPUSPEED 0x141
include/configs/mx25pdk.h +0 -1
@@ -12,7 +12,6 @@/* High Level Configuration Options */ #define CONFIG_MX25 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_TEXT_BASE 0x81200000#define CONFIG_MXC_GPIO
include/configs/mx31ads.h +0 -2
@@ -135,8 +135,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 -#define CONFIG_CMDLINE_EDITING 1/*-----------------------------------------------------------------------
include/configs/mx31pdk.h +0 -2
@@ -137,8 +137,6 @@/* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x81000000 -#define CONFIG_SYS_HZ 1000 -#define CONFIG_CMDLINE_EDITING /*-----------------------------------------------------------------------
include/configs/mx35pdk.h +0 -2
@@ -155,8 +155,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 -/* * Physical Memory Map */
include/configs/mx51_efikamx.h +0 -1
@@ -227,7 +227,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000#define CONFIG_CMDLINE_EDITING /*-----------------------------------------------------------------------
include/configs/mx51evk.h +0 -1
@@ -232,7 +232,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000#define CONFIG_CMDLINE_EDITING /*-----------------------------------------------------------------------
include/configs/mx53ard.h +0 -1
@@ -200,7 +200,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000#define CONFIG_CMDLINE_EDITING /* Physical Memory Map */
include/configs/mx53evk.h +0 -1
@@ -150,7 +150,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000#define CONFIG_CMDLINE_EDITING /* Physical Memory Map */
include/configs/mx53loco.h +0 -1
@@ -192,7 +192,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000#define CONFIG_CMDLINE_EDITING /* Physical Memory Map */
include/configs/mx53smd.h +0 -1
@@ -135,7 +135,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000#define CONFIG_CMDLINE_EDITING /* Physical Memory Map */
include/configs/mx6qarm2.h +0 -1
@@ -127,7 +127,6 @@#define CONFIG_SYS_MEMTEST_END 0x10010000#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000#define CONFIG_CMDLINE_EDITING
include/configs/mx6sabre_common.h +0 -1
@@ -185,7 +185,6 @@#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000#define CONFIG_CMDLINE_EDITING #define CONFIG_STACKSIZE (128 * 1024)
include/configs/mx6slevk.h +0 -1
@@ -149,7 +149,6 @@#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_512M)#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000#define CONFIG_CMDLINE_EDITING #define CONFIG_STACKSIZE SZ_128K
include/configs/mxs.h +0 -3
@@ -41,9 +41,6 @@* CPU specifics */ -/* Ticks per second */ -#define CONFIG_SYS_HZ 1000 -/* MXS uses FDT */ #define CONFIG_OF_LIBFDT
include/configs/nhk8815.h +0 -1
@@ -76,7 +76,6 @@#define CONFIG_BOARD_LATE_INIT /* call board_late_init during start up */ /* timing informazion */ -#define CONFIG_SYS_HZ 1000/* Mandatory... */ #define CONFIG_SYS_TIMERBASE 0x101E2000/* serial port (PL011) configuration */
include/configs/nios2-generic.h +0 -1
@@ -39,7 +39,6 @@#define CONFIG_SYS_LOW_RES_TIMER #define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_TIMER_BASE#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_TIMER_IRQ -#define CONFIG_SYS_HZ 1000/* Always 1000 */ #define CONFIG_SYS_NIOS_TMRMS 10/* Desired period (msec)*/ #define CONFIG_SYS_NIOS_TMRCNT \ (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_TIMER_FREQ / 1000) - 1)
include/configs/nitrogen6x.h +0 -1
@@ -299,7 +299,6 @@#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000#define CONFIG_CMDLINE_EDITING
include/configs/nokia_rx51.h +0 -1
@@ -426,7 +426,6 @@ int rx51_kp_getc(void);*/ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/* * Stack sizes
include/configs/o2dnt-common.h +0 -1
@@ -332,7 +332,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_HZ 1000/* * Various low-level settings
include/configs/omap1510inn.h +0 -1
@@ -116,7 +116,6 @@*/ #define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE/* use timer 1 */ #define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/*----------------------------------------------------------------------- * Physical Memory Map
include/configs/omap3_beagle.h +0 -1
@@ -341,7 +341,6 @@*/ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/*----------------------------------------------------------------------- * Physical Memory Map
include/configs/omap3_evm_common.h +0 -1
@@ -35,7 +35,6 @@*/ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/* Size of environment - 128KB */ #define CONFIG_ENV_SIZE (128 << 10)
include/configs/omap3_logic.h +0 -1
@@ -265,7 +265,6 @@*/ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/* * Physical Memory Map
include/configs/omap3_mvblx.h +0 -1
@@ -236,7 +236,6 @@*/ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/*----------------------------------------------------------------------- * Physical Memory Map
include/configs/omap3_overo.h +0 -1
@@ -217,7 +217,6 @@*/ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/*----------------------------------------------------------------------- * Physical Memory Map
include/configs/omap3_pandora.h +0 -1
@@ -201,7 +201,6 @@*/ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/*----------------------------------------------------------------------- * Physical Memory Map
include/configs/omap3_sdp3430.h +0 -1
@@ -273,7 +273,6 @@*/ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
include/configs/omap3_zoom1.h +0 -1
@@ -228,7 +228,6 @@*/ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/*----------------------------------------------------------------------- * Physical Memory Map
include/configs/omap4_common.h +0 -1
@@ -220,7 +220,6 @@/* Use General purpose timer 1 */ #define CONFIG_SYS_TIMERBASE GPT2_BASE#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/* * SDRAM Memory Map
include/configs/omap5912osk.h +0 -1
@@ -118,7 +118,6 @@*/ #define CONFIG_SYS_TIMERBASE 0xFFFEC500/* use timer 1 */ #define CONFIG_SYS_PTV 7/* 2^(PTV+1), divide by 256 */ -#define CONFIG_SYS_HZ 1000/*----------------------------------------------------------------------- * Physical Memory Map
include/configs/openrisc-generic.h +0 -1
@@ -55,7 +55,6 @@/* * TIMER */ -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_OPENRISC_TMR_HZ 100/*
include/configs/origen.h +0 -2
@@ -102,8 +102,6 @@#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x6000000)#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) -#define CONFIG_SYS_HZ 1000 -/* ORIGEN has 4 bank of DRAM */ #define CONFIG_NR_DRAM_BANKS 4#define SDRAM_BANK_SIZE (256UL << 20UL)/* 256 MB */
include/configs/otc570.h +0 -1
@@ -39,7 +39,6 @@/* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768/* 32.768 kHz crystal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */ -#define CONFIG_SYS_HZ 1000/* decrementer freq */ /* Misc CPU related */ #define CONFIG_SKIP_LOWLEVEL_INIT
include/configs/p1_p2_rdb_pc.h +0 -1
@@ -834,7 +834,6 @@/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms tick */ /* * For booting Linux, the board info and command line data
include/configs/p1_twr.h +0 -1
@@ -482,7 +482,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms tick */ /* * For booting Linux, the board info and command line data
include/configs/p3mx.h +0 -2
@@ -284,8 +284,6 @@#define CONFIG_SYS_LOAD_ADDR 0x08000000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_LOOPW 1/* enable loopw command */ #define CONFIG_MX_CYCLIC 1/* enable mdc/mwc commands */
include/configs/p3p440.h +0 -2
@@ -213,8 +213,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_AUTO_COMPLETE 1/* add autocompletion support */ #define CONFIG_LOOPW 1/* enable loopw command */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
include/configs/palmtreo680.h +0 -1
@@ -120,7 +120,6 @@* Clock Configuration */ #undef CONFIG_SYS_CLKS_IN_HZ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ #define CONFIG_SYS_CPUSPEED 0x210/* 416MHz ; N=2,L=16 */ /*
include/configs/pb1x00.h +0 -2
@@ -66,8 +66,6 @@#define CONFIG_SYS_MIPS_TIMER_FREQ 396000000 -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_SDRAM_BASE 0x80000000/* Cached addr */ #define CONFIG_SYS_LOAD_ADDR 0x81000000/* default load address */
include/configs/pcm030.h +0 -1
@@ -364,7 +364,6 @@ RTC configuration#define CONFIG_SYS_MEMTEST_END 0x00f00000/* 1 ... 15 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ #define CONFIG_DISPLAY_BOARDINFO 1
include/configs/pcm051.h +0 -1
@@ -155,7 +155,6 @@/* Platform/Board specific defs */ #define CONFIG_SYS_TIMERBASE 0x48040000/* Use Timer2 */ #define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000/* 1ms clock */ #define CONFIG_CONS_INDEX 1/* NS16550 Configuration */
include/configs/pcs440ep.h +0 -2
@@ -293,8 +293,6 @@#define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ #define CONFIG_LYNXKDI 1/* support kdi files */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * PCI stuff *-----------------------------------------------------------------------
include/configs/pdm360ng.h +0 -1
@@ -417,7 +417,6 @@/* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Decrementer freq: 1ms ticks */ -#define CONFIG_SYS_HZ 1000/* * For booting Linux, the board info and command line data
include/configs/pdnb3.h +0 -1
@@ -100,7 +100,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00010000/* default load address */ #define CONFIG_IXP425_TIMER_CLK 66666666 -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ /*************************************************************** * Platform/Board specific defines start here.
include/configs/pf5200.h +0 -2
@@ -254,8 +254,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 1 line
1.8.1.2
Part of the diff is not shown here. View the raw message.
v3 cover Consolidate CONFIG_SYS_HZ definition
In reply to Rob HerringFrom: Rob Herring <[email protected]>
Since CONFIG_SYS_HZ is required to be 1000, this series consolidates the definition to a common definition and removes it from platform config headers.
I split this version into 3 patches to pass maillist filters. The only other change is moving the warning for CONFIG_SYS_HZ != 1000 into lib/time.c so there is only 1 warning per config rather than every include of config_fallbacks.h.
Rob
Rob Herring (3):
config: consolidate CONFIG_SYS_HZ definition
config: remove platform CONFIG_SYS_HZ definition part 1/2
config: remove platform CONFIG_SYS_HZ definition part 2/2
arch/arm/include/asm/arch-lpc32xx/config.h | 3 --- arch/blackfin/include/asm/config.h | 7 ------- include/config_fallbacks.h | 4 ++++ include/configs/A3000.h | 1 - include/configs/APC405.h | 2 -- include/configs/AR405.h | 2 -- include/configs/ASH405.h | 2 -- include/configs/Adder.h | 2 -- include/configs/B4860QDS.h | 1 - include/configs/BC3450.h | 2 -- include/configs/BSC9131RDB.h | 1 - include/configs/BSC9132QDS.h | 1 - include/configs/C29XPCIE.h | 1 - include/configs/CATcenter.h | 2 -- include/configs/CMS700.h | 2 -- include/configs/CPC45.h | 1 - include/configs/CPCI2DP.h | 2 -- include/configs/CPCI405.h | 2 -- include/configs/CPCI4052.h | 2 -- include/configs/CPCI405AB.h | 2 -- include/configs/CPCI405DT.h | 2 -- include/configs/CPCI750.h | 1 - include/configs/CPCIISER4.h | 2 -- include/configs/CPU86.h | 2 -- include/configs/CPU87.h | 2 -- include/configs/CRAYL1.h | 1 - include/configs/CU824.h | 1 - include/configs/DB64360.h | 1 - include/configs/DB64460.h | 1 - include/configs/DP405.h | 2 -- include/configs/DU405.h | 2 -- include/configs/DU440.h | 2 -- include/configs/ELPPC.h | 2 -- include/configs/ELPT860.h | 2 -- include/configs/EP88x.h | 2 -- include/configs/ESTEEM192E.h | 2 -- include/configs/EVB64260.h | 2 -- include/configs/EXBITGEN.h | 2 -- include/configs/FADS823.h | 2 -- include/configs/FADS850SAR.h | 2 -- include/configs/FLAGADM.h | 2 -- include/configs/FPS850L.h | 2 -- include/configs/FPS860L.h | 2 -- include/configs/G2000.h | 2 -- include/configs/GEN860T.h | 5 ----- include/configs/GENIETV.h | 2 -- include/configs/HH405.h | 2 -- include/configs/HIDDEN_DRAGON.h | 1 - include/configs/HUB405.h | 2 -- include/configs/HWW1U1A.h | 2 -- include/configs/ICU862.h | 2 -- include/configs/IDS8247.h | 2 -- include/configs/IP860.h | 2 -- include/configs/IPHASE4539.h | 2 -- include/configs/ISPAN.h | 2 -- include/configs/IVML24.h | 2 -- include/configs/IVMS8.h | 2 -- include/configs/IceCube.h | 2 -- include/configs/JSE.h | 2 -- include/configs/KAREF.h | 3 --- include/configs/KUP4K.h | 2 -- include/configs/KUP4X.h | 2 -- include/configs/M5208EVBE.h | 1 - include/configs/M52277EVB.h | 2 -- include/configs/M5235EVB.h | 1 - include/configs/M5249EVB.h | 2 -- include/configs/M5253DEMO.h | 2 -- include/configs/M5253EVBE.h | 2 -- include/configs/M5272C3.h | 1 - include/configs/M5275EVB.h | 1 - include/configs/M5282EVB.h | 1 - include/configs/M53017EVB.h | 1 - include/configs/M5329EVB.h | 1 - include/configs/M5373EVB.h | 1 - include/configs/M54418TWR.h | 2 -- include/configs/M54451EVB.h | 2 -- include/configs/M54455EVB.h | 2 -- include/configs/M5475EVB.h | 1 - include/configs/M5485EVB.h | 1 - include/configs/MBX.h | 2 -- include/configs/MBX860T.h | 2 -- include/configs/MERGERBOX.h | 1 - include/configs/METROBOX.h | 3 --- include/configs/MHPC.h | 2 -- include/configs/MIP405.h | 2 -- include/configs/MOUSSE.h | 1 - include/configs/MPC8260ADS.h | 2 -- include/configs/MPC8266ADS.h | 2 -- include/configs/MPC8308RDB.h | 1 - include/configs/MPC8313ERDB.h | 1 - include/configs/MPC8315ERDB.h | 1 - include/configs/MPC8323ERDB.h | 1 - include/configs/MPC832XEMDS.h | 1 - include/configs/MPC8349EMDS.h | 1 - include/configs/MPC8349ITX.h | 1 - include/configs/MPC8360EMDS.h | 1 - include/configs/MPC8360ERDK.h | 1 - include/configs/MPC837XEMDS.h | 1 - include/configs/MPC837XERDB.h | 1 - include/configs/MPC8536DS.h | 1 - include/configs/MPC8540ADS.h | 1 - include/configs/MPC8541CDS.h | 1 - include/configs/MPC8544DS.h | 1 - include/configs/MPC8548CDS.h | 1 - include/configs/MPC8555CDS.h | 1 - include/configs/MPC8560ADS.h | 1 - include/configs/MPC8568MDS.h | 1 - include/configs/MPC8569MDS.h | 1 - include/configs/MPC8572DS.h | 1 - include/configs/MPC8610HPCD.h | 1 - include/configs/MPC8641HPCN.h | 1 - include/configs/MUSENKI.h | 1 - include/configs/MVBC_P.h | 2 -- include/configs/MVBLM7.h | 1 - include/configs/MVBLUE.h | 1 - include/configs/MVS1.h | 2 -- include/configs/MVSMR.h | 2 -- include/configs/MigoR.h | 1 - include/configs/NETPHONE.h | 2 -- include/configs/NETTA.h | 2 -- include/configs/NETTA2.h | 2 -- include/configs/NETVIA.h | 2 -- include/configs/NSCU.h | 2 -- include/configs/NX823.h | 2 -- include/configs/OCRTC.h | 2 -- include/configs/ORSG.h | 2 -- include/configs/P1010RDB.h | 1 - include/configs/P1022DS.h | 1 - include/configs/P1023RDB.h | 1 - include/configs/P1023RDS.h | 1 - include/configs/P1_P2_RDB.h | 1 - include/configs/P2020COME.h | 1 - include/configs/P2020DS.h | 1 - include/configs/P2041RDB.h | 1 - include/configs/P3G4.h | 2 -- include/configs/PATI.h | 2 -- include/configs/PCI405.h | 2 -- include/configs/PCI5441.h | 1 - include/configs/PIP405.h | 2 -- include/configs/PK1C20.h | 1 - include/configs/PLU405.h | 2 -- include/configs/PM520.h | 2 -- include/configs/PM826.h | 2 -- include/configs/PM828.h | 2 -- include/configs/PMC405.h | 2 -- include/configs/PMC405DE.h | 2 -- include/configs/PMC440.h | 2 -- include/configs/PN62.h | 1 - include/configs/PPChameleonEVB.h | 2 -- include/configs/QS823.h | 2 -- include/configs/QS850.h | 2 -- include/configs/QS860T.h | 2 -- include/configs/R360MPI.h | 2 -- include/configs/RBC823.h | 2 -- include/configs/RPXClassic.h | 2 -- include/configs/RPXlite.h | 2 -- include/configs/RPXlite_DW.h | 2 -- include/configs/RPXsuper.h | 1 - include/configs/RRvision.h | 2 -- include/configs/Rattler.h | 2 -- include/configs/SIMPC8313.h | 1 - include/configs/SM850.h | 2 -- include/configs/SPD823TS.h | 2 -- include/configs/SXNI855T.h | 2 -- include/configs/Sandpoint8240.h | 1 - include/configs/Sandpoint8245.h | 1 - include/configs/TASREG.h | 2 -- include/configs/TB5200.h | 2 -- include/configs/TK885D.h | 2 -- include/configs/TOP5200.h | 2 -- include/configs/TOP860.h | 1 - include/configs/TQM5200.h | 2 -- include/configs/TQM823L.h | 2 -- include/configs/TQM823M.h | 2 -- include/configs/TQM8260.h | 2 -- include/configs/TQM8272.h | 2 -- include/configs/TQM834x.h | 1 - include/configs/TQM850L.h | 2 -- include/configs/TQM850M.h | 2 -- include/configs/TQM855L.h | 2 -- include/configs/TQM855M.h | 2 -- include/configs/TQM860L.h | 2 -- include/configs/TQM860M.h | 2 -- include/configs/TQM862L.h | 2 -- include/configs/TQM862M.h | 2 -- include/configs/TQM866M.h | 2 -- include/configs/TQM885D.h | 2 -- include/configs/Total5200.h | 2 -- include/configs/VCMA9.h | 1 - include/configs/VOH405.h | 2 -- include/configs/VOM405.h | 2 -- include/configs/VoVPN-GW.h | 1 - include/configs/W7OLMC.h | 2 -- include/configs/W7OLMG.h | 2 -- include/configs/WUH405.h | 2 -- include/configs/ZPC1900.h | 2 -- include/configs/ZUMA.h | 2 -- include/configs/a320evb.h | 1 - include/configs/a3m071.h | 1 - include/configs/a4m072.h | 2 -- include/configs/ac14xx.h | 3 --- include/configs/actux1.h | 1 - include/configs/actux2.h | 1 - include/configs/actux3.h | 1 - include/configs/actux4.h | 1 - include/configs/adp-ag101.h | 6 ------ include/configs/adp-ag101p.h | 6 ------ include/configs/adp-ag102.h | 6 ------ include/configs/aev.h | 2 -- include/configs/afeb9260.h | 1 - include/configs/alpr.h | 2 -- include/configs/am3517_crane.h | 1 - include/configs/am3517_evm.h | 1 - include/configs/am43xx_evm.h | 1 - include/configs/amcc-common.h | 2 -- include/configs/ap325rxa.h | 1 - include/configs/ap_sh4a_4a.h | 1 - include/configs/aria.h | 2 -- include/configs/armadillo-800eva.h | 1 - include/configs/arndale.h | 2 -- include/configs/astro_mcf5373l.h | 2 -- include/configs/at91rm9200ek.h | 1 - include/configs/at91sam9260ek.h | 1 - include/configs/at91sam9261ek.h | 1 - include/configs/at91sam9263ek.h | 1 - include/configs/at91sam9m10g45ek.h | 1 - include/configs/at91sam9n12ek.h | 1 - include/configs/at91sam9rlek.h | 1 - include/configs/at91sam9x5ek.h | 1 - include/configs/atc.h | 2 -- include/configs/atngw100.h | 2 -- include/configs/atngw100mkii.h | 6 ------ include/configs/atstk1002.h | 6 ------ include/configs/atstk1003.h | 6 ------ include/configs/atstk1004.h | 6 ------ include/configs/atstk1006.h | 5 ----- include/configs/calimain.h | 1 - include/configs/cam_enc_4xx.h | 1 - include/configs/canmb.h | 2 -- include/configs/cgtqmx6eval.h | 1 - include/configs/cm4008.h | 2 -- include/configs/cm41xx.h | 2 -- include/configs/cm5200.h | 1 - include/configs/cm_t35.h | 1 - include/configs/cmi_mpc5xx.h | 2 -- include/configs/cobra5272.h | 2 -- include/configs/cogent_mpc8260.h | 2 -- include/configs/cogent_mpc8xx.h | 2 -- include/configs/colibri_pxa270.h | 1 - include/configs/controlcenterd.h | 1 - include/configs/coreboot.h | 1 - include/configs/corenet_ds.h | 1 - include/configs/cpci5200.h | 2 -- include/configs/cpu9260.h | 1 - include/configs/cpuat91.h | 1 - include/configs/csb272.h | 2 -- include/configs/csb472.h | 1 - include/configs/da830evm.h | 1 - include/configs/da850evm.h | 1 - include/configs/davinci_dm355evm.h | 1 - include/configs/davinci_dm355leopard.h | 1 - include/configs/davinci_dm365evm.h | 1 - include/configs/davinci_dm6467evm.h | 1 - include/configs/davinci_dvevm.h | 1 - include/configs/davinci_schmoogie.h | 1 - include/configs/davinci_sffsdr.h | 1 - include/configs/davinci_sonata.h | 1 - include/configs/dbau1x00.h | 2 -- include/configs/debris.h | 1 - include/configs/devkit8000.h | 1 - include/configs/dig297.h | 1 - include/configs/digsy_mtc.h | 2 -- include/configs/dvlhost.h | 1 - include/configs/eXalion.h | 1 - include/configs/ea20.h | 1 - include/configs/eb_cpu5282.h | 1 - include/configs/eb_cpux9k2.h | 1 - include/configs/ecovec.h | 1 - include/configs/edminiv2.h | 2 -- include/configs/enbw_cmc.h | 1 - include/configs/ep8248.h | 2 -- include/configs/ep8260.h | 2 -- include/configs/ep82xxm.h | 2 -- include/configs/espt.h | 1 - include/configs/ethernut5.h | 1 - include/configs/exynos5250-dt.h | 2 -- include/configs/favr-32-ezkit.h | 6 ------ include/configs/flea3.h | 2 -- include/configs/galaxy5200.h | 1 - include/configs/gr_cpci_ax2000.h | 2 -- include/configs/gr_ep2s60.h | 2 -- include/configs/gr_xc3s_1500.h | 2 -- include/configs/grasshopper.h | 6 ------ include/configs/grsim.h | 2 -- include/configs/grsim_leon2.h | 2 -- include/configs/gw8260.h | 1 - include/configs/h2200.h | 2 -- include/configs/hammerhead.h | 2 -- include/configs/hawkboard.h | 1 - include/configs/hermes.h | 2 -- include/configs/highbank.h | 2 -- include/configs/hmi1001.h | 2 -- include/configs/hymod.h | 2 -- include/configs/igep0033.h | 1 - include/configs/igep00x0.h | 1 - include/configs/ima3-mx53.h | 1 - include/configs/imx27lite-common.h | 1 - include/configs/imx31_litekit.h | 2 -- include/configs/imx31_phycore.h | 2 -- include/configs/incaip.h | 2 -- include/configs/inka4x0.h | 2 -- include/configs/integrator-common.h | 1 - include/configs/ipam390.h | 1 - include/configs/ipek01.h | 1 - include/configs/jadecpu.h | 1 - include/configs/jornada.h | 1 - include/configs/jupiter.h | 2 -- include/configs/km/keymile-common.h | 2 -- include/configs/korat.h | 2 -- include/configs/kvme080.h | 1 - include/configs/kzm9g.h | 2 -- include/configs/linkstation.h | 1 - include/configs/lp8x4x.h | 5 ----- include/configs/lubbock.h | 1 - include/configs/lwmon.h | 2 -- include/configs/lwmon5.h | 2 -- include/configs/m53evk.h | 1 - include/configs/manroland/mpc5200-common.h | 2 -- include/configs/mcc200.h | 2 -- include/configs/mcx.h | 1 - include/configs/mecp5123.h | 2 -- include/configs/mecp5200.h | 2 -- include/configs/meesc.h | 1 - include/configs/microblaze-generic.h | 1 - include/configs/mimc200.h | 2 -- include/configs/motionpro.h | 2 -- include/configs/mpc5121ads.h | 1 - include/configs/mpc7448hpc2.h | 2 -- include/configs/mpc8308_p1m.h | 1 - include/configs/mpq101.h | 1 - include/configs/mpr2.h | 1 - include/configs/ms7720se.h | 1 - include/configs/ms7722se.h | 1 - include/configs/ms7750se.h | 1 - include/configs/muas3001.h | 2 -- include/configs/munices.h | 1 - include/configs/mv-common.h | 1 - include/configs/mx1ads.h | 1 - include/configs/mx25pdk.h | 1 - include/configs/mx31ads.h | 2 -- include/configs/mx31pdk.h | 2 -- include/configs/mx35pdk.h | 2 -- include/configs/mx51_efikamx.h | 1 - include/configs/mx51evk.h | 1 - include/configs/mx53ard.h | 1 - include/configs/mx53evk.h | 1 - include/configs/mx53loco.h | 1 - include/configs/mx53smd.h | 1 - include/configs/mx6qarm2.h | 1 - include/configs/mx6sabre_common.h | 1 - include/configs/mx6slevk.h | 1 - include/configs/mxs.h | 3 --- include/configs/nhk8815.h | 1 - include/configs/nios2-generic.h | 1 - include/configs/nitrogen6x.h | 1 - include/configs/nokia_rx51.h | 1 - include/configs/o2dnt-common.h | 1 - include/configs/omap1510inn.h | 1 - include/configs/omap3_beagle.h | 1 - include/configs/omap3_evm_common.h | 1 - include/configs/omap3_logic.h | 1 - include/configs/omap3_mvblx.h | 1 - include/configs/omap3_overo.h | 1 - include/configs/omap3_pandora.h | 1 - include/configs/omap3_sdp3430.h | 1 - include/configs/omap3_zoom1.h | 1 - include/configs/omap4_common.h | 1 - include/configs/omap5912osk.h | 1 - include/configs/openrisc-generic.h | 1 - include/configs/origen.h | 2 -- include/configs/otc570.h | 1 - include/configs/p1_p2_rdb_pc.h | 1 - include/configs/p1_twr.h | 1 - include/configs/p3mx.h | 2 -- include/configs/p3p440.h | 2 -- include/configs/palmtreo680.h | 1 - include/configs/pb1x00.h | 2 -- include/configs/pcm030.h | 1 - include/configs/pcm051.h | 1 - include/configs/pcs440ep.h | 2 -- include/configs/pdm360ng.h | 1 - include/configs/pdnb3.h | 1 - include/configs/pf5200.h | 2 -- include/configs/pm9261.h | 2 -- include/configs/pm9263.h | 2 -- include/configs/pm9g45.h | 1 - include/configs/ppmc7xx.h | 1 - include/configs/ppmc8260.h | 1 - include/configs/pxa255_idp.h | 1 - include/configs/qemu-malta.h | 1 - include/configs/qemu-mips.h | 2 -- include/configs/qemu-mips64.h | 2 -- include/configs/qong.h | 2 -- include/configs/quad100hd.h | 2 -- include/configs/quantum.h | 2 -- include/configs/r0p7734.h | 1 - include/configs/r2dplus.h | 1 - include/configs/r7780mp.h | 1 - include/configs/rpi_b.h | 3 --- include/configs/rsdproto.h | 2 -- include/configs/s5p_goni.h | 2 -- include/configs/s5pc210_universal.h | 2 -- include/configs/sacsng.h | 1 - include/configs/sama5d3xek.h | 1 - include/configs/sandbox.h | 2 -- include/configs/sbc35_a9g20.h | 1 - include/configs/sbc405.h | 2 -- include/configs/sbc8349.h | 1 - include/configs/sbc8548.h | 1 - include/configs/sbc8641d.h | 1 - include/configs/sc3.h | 2 -- include/configs/sh7752evb.h | 1 - include/configs/sh7757lcr.h | 1 - include/configs/sh7763rdp.h | 1 - include/configs/sh7785lcr.h | 1 - include/configs/shmin.h | 1 - include/configs/siemens-am33x-common.h | 2 -- include/configs/smdk2410.h | 2 -- include/configs/smdkc100.h | 2 -- include/configs/smdkv310.h | 2 -- include/configs/snapper9260.h | 1 - include/configs/snowball.h | 1 - include/configs/socfpga_cyclone5.h | 1 - include/configs/socrates.h | 1 - include/configs/spc1920.h | 2 -- include/configs/spear-common.h | 1 - include/configs/spieval.h | 2 -- include/configs/stamp9g20.h | 1 - include/configs/stxgp3.h | 1 - include/configs/stxssa.h | 1 - include/configs/stxxtc.h | 2 -- include/configs/svm_sc8xx.h | 2 -- include/configs/t4qds.h | 1 - include/configs/tam3517-common.h | 1 - include/configs/tb0229.h | 2 -- include/configs/tegra-common.h | 2 -- include/configs/ti814x_evm.h | 2 -- include/configs/ti816x_evm.h | 1 - include/configs/ti_armv7_common.h | 1 - include/configs/titanium.h | 1 - include/configs/tnetv107x_evm.h | 1 - include/configs/tny_a9260.h | 1 - include/configs/top9000.h | 1 - include/configs/trats.h | 2 -- include/configs/tricorder.h | 1 - include/configs/trizepsiv.h | 1 - include/configs/tt01.h | 2 -- include/configs/tx25.h | 1 - include/configs/u8500_href.h | 1 - include/configs/uc100.h | 2 -- include/configs/utx8245.h | 1 - include/configs/v37.h | 2 -- include/configs/v38b.h | 2 -- include/configs/vct.h | 1 - include/configs/ve8313.h | 1 - include/configs/vexpress_common.h | 1 - include/configs/vf610twr.h | 1 - include/configs/virtlab2.h | 2 -- include/configs/vision2.h | 1 - include/configs/vl_ma2sc.h | 1 - include/configs/vme8349.h | 1 - include/configs/vpac270.h | 1 - include/configs/wandboard.h | 1 - include/configs/woodburn_common.h | 3 --- include/configs/x600.h | 1 - include/configs/xaeniax.h | 1 - include/configs/xilinx-ppc.h | 1 - include/configs/xpedite1000.h | 1 - include/configs/xpedite517x.h | 1 - include/configs/xpedite520x.h | 1 - include/configs/xpedite537x.h | 1 - include/configs/xpedite550x.h | 1 - include/configs/zeus.h | 2 -- include/configs/zmx25.h | 1 - include/configs/zynq.h | 1 - lib/time.c | 4 ++++ 486 files changed, 8 insertions(+), 777 deletions(-)
Signature · 1 line
1.8.1.2
PATCH v3 1/3 config: consolidate CONFIG_SYS_HZ definition
From: Rob Herring <[email protected]>
According to the README, CONFIG_SYS_HZ must be 1000 and most platforms follow that. In preparation to remove CONFIG_SYS_HZ from all these platforms, provide a common definition. The platforms which use a value other than 1000 will get build warning now. These configs are:
include/configs/M5271EVB.h:#define CONFIG_SYS_HZ 1000000
include/configs/balloon3.h:#define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */
include/configs/idmr.h:#define CONFIG_SYS_HZ (50000000 / 64)
include/configs/mini2440.h:#define CONFIG_SYS_HZ 1562500
include/configs/mx1ads.h:#define CONFIG_SYS_HZ 3686400
include/configs/omap3_zoom2.h:#define CONFIG_SYS_HZ ((V_SCLK) / (2 << CONFIG_SYS_PTV)) include/configs/omap730p2.h:#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) include/configs/palmld.h:#define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */ include/configs/palmtc.h:#define CONFIG_SYS_HZ 3686400 /* Timer @ 3686400 Hz */
include/configs/rsk7203.h:#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
include/configs/rsk7264.h:#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
include/configs/rsk7269.h:#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
include/configs/scb9328.h:#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
include/configs/versatile.h:#define CONFIG_SYS_HZ (1000000 / 256)
include/configs/zipitz2.h:#define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */
---
v3:
- move warning to lib/time.c
- split to 3 patches
v2:
- Add warning for boards defining CONFIG_SYS_HZ. Boards using value other than 1000 will now generate warnings.
- Change KAREF, METROBOX, and MVBLUE to use 1000. Appeared to be a typo.
- Convert a few more boards to remove CONFIG_SYS_HZ that were missed in v1.
include/config_fallbacks.h | 4 ++++ lib/time.c | 4 ++++ 2 files changed, 8 insertions(+)
include/config_fallbacks.h +4 -0
@@ -53,4 +53,8 @@#define HAVE_BLOCK_DEVICE #endif +#ifndef CONFIG_SYS_HZ +#define CONFIG_SYS_HZ 1000 +#endif +#endif /* __CONFIG_FALLBACKS_H */
lib/time.c +4 -0
@@ -8,6 +8,10 @@#include <common.h> #include <watchdog.h> +#if CONFIG_SYS_HZ !=1000 +#warning "CONFIG_SYS_HZ must be 1000 and should not be defined by platforms" +#endif +#ifndef CONFIG_WD_PERIOD # define CONFIG_WD_PERIOD (10 * 1000 * 1000)/* 10 seconds default*/ #endif
Signature · 1 line
1.8.1.2
PATCH v3 2/3 config: remove platform CONFIG_SYS_HZ definition part 1/2
In reply to Rob HerringFrom: Rob Herring <[email protected]>
Remove platform CONFIG_SYS_HZ definition for configs A-Z*.
---
v3:
- new patch split out from patch 1
include/configs/A3000.h | 1 - include/configs/APC405.h | 2 -- include/configs/AR405.h | 2 -- include/configs/ASH405.h | 2 -- include/configs/Adder.h | 2 -- include/configs/B4860QDS.h | 1 - include/configs/BC3450.h | 2 -- include/configs/BSC9131RDB.h | 1 - include/configs/BSC9132QDS.h | 1 - include/configs/C29XPCIE.h | 1 - include/configs/CATcenter.h | 2 -- include/configs/CMS700.h | 2 -- include/configs/CPC45.h | 1 - include/configs/CPCI2DP.h | 2 -- include/configs/CPCI405.h | 2 -- include/configs/CPCI4052.h | 2 -- include/configs/CPCI405AB.h | 2 -- include/configs/CPCI405DT.h | 2 -- include/configs/CPCI750.h | 1 - include/configs/CPCIISER4.h | 2 -- include/configs/CPU86.h | 2 -- include/configs/CPU87.h | 2 -- include/configs/CRAYL1.h | 1 - include/configs/CU824.h | 1 - include/configs/DB64360.h | 1 - include/configs/DB64460.h | 1 - include/configs/DP405.h | 2 -- include/configs/DU405.h | 2 -- include/configs/DU440.h | 2 -- include/configs/ELPPC.h | 2 -- include/configs/ELPT860.h | 2 -- include/configs/EP88x.h | 2 -- include/configs/ESTEEM192E.h | 2 -- include/configs/EVB64260.h | 2 -- include/configs/EXBITGEN.h | 2 -- include/configs/FADS823.h | 2 -- include/configs/FADS850SAR.h | 2 -- include/configs/FLAGADM.h | 2 -- include/configs/FPS850L.h | 2 -- include/configs/FPS860L.h | 2 -- include/configs/G2000.h | 2 -- include/configs/GEN860T.h | 5 ----- include/configs/GENIETV.h | 2 -- include/configs/HH405.h | 2 -- include/configs/HIDDEN_DRAGON.h | 1 - include/configs/HUB405.h | 2 -- include/configs/HWW1U1A.h | 2 -- include/configs/ICU862.h | 2 -- include/configs/IDS8247.h | 2 -- include/configs/IP860.h | 2 -- include/configs/IPHASE4539.h | 2 -- include/configs/ISPAN.h | 2 -- include/configs/IVML24.h | 2 -- include/configs/IVMS8.h | 2 -- include/configs/IceCube.h | 2 -- include/configs/JSE.h | 2 -- include/configs/KAREF.h | 3 --- include/configs/KUP4K.h | 2 -- include/configs/KUP4X.h | 2 -- include/configs/M5208EVBE.h | 1 - include/configs/M52277EVB.h | 2 -- include/configs/M5235EVB.h | 1 - include/configs/M5249EVB.h | 2 -- include/configs/M5253DEMO.h | 2 -- include/configs/M5253EVBE.h | 2 -- include/configs/M5272C3.h | 1 - include/configs/M5275EVB.h | 1 - include/configs/M5282EVB.h | 1 - include/configs/M53017EVB.h | 1 - include/configs/M5329EVB.h | 1 - include/configs/M5373EVB.h | 1 - include/configs/M54418TWR.h | 2 -- include/configs/M54451EVB.h | 2 -- include/configs/M54455EVB.h | 2 -- include/configs/M5475EVB.h | 1 - include/configs/M5485EVB.h | 1 - include/configs/MBX.h | 2 -- include/configs/MBX860T.h | 2 -- include/configs/MERGERBOX.h | 1 - include/configs/METROBOX.h | 3 --- include/configs/MHPC.h | 2 -- include/configs/MIP405.h | 2 -- include/configs/MOUSSE.h | 1 - include/configs/MPC8260ADS.h | 2 -- include/configs/MPC8266ADS.h | 2 -- include/configs/MPC8308RDB.h | 1 - include/configs/MPC8313ERDB.h | 1 - include/configs/MPC8315ERDB.h | 1 - include/configs/MPC8323ERDB.h | 1 - include/configs/MPC832XEMDS.h | 1 - include/configs/MPC8349EMDS.h | 1 - include/configs/MPC8349ITX.h | 1 - include/configs/MPC8360EMDS.h | 1 - include/configs/MPC8360ERDK.h | 1 - include/configs/MPC837XEMDS.h | 1 - include/configs/MPC837XERDB.h | 1 - include/configs/MPC8536DS.h | 1 - include/configs/MPC8540ADS.h | 1 - include/configs/MPC8541CDS.h | 1 - include/configs/MPC8544DS.h | 1 - include/configs/MPC8548CDS.h | 1 - include/configs/MPC8555CDS.h | 1 - include/configs/MPC8560ADS.h | 1 - include/configs/MPC8568MDS.h | 1 - include/configs/MPC8569MDS.h | 1 - include/configs/MPC8572DS.h | 1 - include/configs/MPC8610HPCD.h | 1 - include/configs/MPC8641HPCN.h | 1 - include/configs/MUSENKI.h | 1 - include/configs/MVBC_P.h | 2 -- include/configs/MVBLM7.h | 1 - include/configs/MVBLUE.h | 1 - include/configs/MVS1.h | 2 -- include/configs/MVSMR.h | 2 -- include/configs/MigoR.h | 1 - include/configs/NETPHONE.h | 2 -- include/configs/NETTA.h | 2 -- include/configs/NETTA2.h | 2 -- include/configs/NETVIA.h | 2 -- include/configs/NSCU.h | 2 -- include/configs/NX823.h | 2 -- include/configs/OCRTC.h | 2 -- include/configs/ORSG.h | 2 -- include/configs/P1010RDB.h | 1 - include/configs/P1022DS.h | 1 - include/configs/P1023RDB.h | 1 - include/configs/P1023RDS.h | 1 - include/configs/P1_P2_RDB.h | 1 - include/configs/P2020COME.h | 1 - include/configs/P2020DS.h | 1 - include/configs/P2041RDB.h | 1 - include/configs/P3G4.h | 2 -- include/configs/PATI.h | 2 -- include/configs/PCI405.h | 2 -- include/configs/PCI5441.h | 1 - include/configs/PIP405.h | 2 -- include/configs/PK1C20.h | 1 - include/configs/PLU405.h | 2 -- include/configs/PM520.h | 2 -- include/configs/PM826.h | 2 -- include/configs/PM828.h | 2 -- include/configs/PMC405.h | 2 -- include/configs/PMC405DE.h | 2 -- include/configs/PMC440.h | 2 -- include/configs/PN62.h | 1 - include/configs/PPChameleonEVB.h | 2 -- include/configs/QS823.h | 2 -- include/configs/QS850.h | 2 -- include/configs/QS860T.h | 2 -- include/configs/R360MPI.h | 2 -- include/configs/RBC823.h | 2 -- include/configs/RPXClassic.h | 2 -- include/configs/RPXlite.h | 2 -- include/configs/RPXlite_DW.h | 2 -- include/configs/RPXsuper.h | 1 - include/configs/RRvision.h | 2 -- include/configs/Rattler.h | 2 -- include/configs/SIMPC8313.h | 1 - include/configs/SM850.h | 2 -- include/configs/SPD823TS.h | 2 -- include/configs/SXNI855T.h | 2 -- include/configs/Sandpoint8240.h | 1 - include/configs/Sandpoint8245.h | 1 - include/configs/TASREG.h | 2 -- include/configs/TB5200.h | 2 -- include/configs/TK885D.h | 2 -- include/configs/TOP5200.h | 2 -- include/configs/TOP860.h | 1 - include/configs/TQM5200.h | 2 -- include/configs/TQM823L.h | 2 -- include/configs/TQM823M.h | 2 -- include/configs/TQM8260.h | 2 -- include/configs/TQM8272.h | 2 -- include/configs/TQM834x.h | 1 - include/configs/TQM850L.h | 2 -- include/configs/TQM850M.h | 2 -- include/configs/TQM855L.h | 2 -- include/configs/TQM855M.h | 2 -- include/configs/TQM860L.h | 2 -- include/configs/TQM860M.h | 2 -- include/configs/TQM862L.h | 2 -- include/configs/TQM862M.h | 2 -- include/configs/TQM866M.h | 2 -- include/configs/TQM885D.h | 2 -- include/configs/Total5200.h | 2 -- include/configs/VCMA9.h | 1 - include/configs/VOH405.h | 2 -- include/configs/VOM405.h | 2 -- include/configs/VoVPN-GW.h | 1 - include/configs/W7OLMC.h | 2 -- include/configs/W7OLMG.h | 2 -- include/configs/WUH405.h | 2 -- include/configs/ZPC1900.h | 2 -- include/configs/ZUMA.h | 2 -- 194 files changed, 323 deletions(-)
include/configs/A3000.h +0 -1
@@ -168,7 +168,6 @@*/ #define CONFIG_SYS_CLK_FREQ 33333333/* external frequency to pll */ -#define CONFIG_SYS_HZ 1000/* Bit-field values for MCCR1. */
include/configs/APC405.h +0 -2
@@ -177,8 +177,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /* Only interrupt boot if space is pressed */
include/configs/AR405.h +0 -2
@@ -128,8 +128,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /*-----------------------------------------------------------------------
include/configs/ASH405.h +0 -2
@@ -123,8 +123,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1/* include version env variable */
include/configs/Adder.h +0 -2
@@ -82,8 +82,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* Default load address */ -#define CONFIG_SYS_HZ 1000/* Decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero) */
include/configs/B4860QDS.h +0 -1
@@ -725,7 +725,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks*/ /* * For booting Linux, the board info and command line data
include/configs/BC3450.h +0 -2
@@ -445,8 +445,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* dec freq: 1ms ticks */ -#define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB )# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */
include/configs/BSC9131RDB.h +0 -1
@@ -372,7 +372,6 @@ extern unsigned long get_sdram_size(void);/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/BSC9132QDS.h +0 -1
@@ -614,7 +614,6 @@ combinations. this should be removed later/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq:1ms ticks */ /*
include/configs/C29XPCIE.h +0 -1
@@ -401,7 +401,6 @@/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* dec freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/CATcenter.h +0 -2
@@ -185,8 +185,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /*-----------------------------------------------------------------------
include/configs/CMS700.h +0 -2
@@ -121,8 +121,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1/* include version env variable */
include/configs/CPC45.h +0 -1
@@ -180,7 +180,6 @@*/ #define CONFIG_SYS_CLK_FREQ 33000000 -#define CONFIG_SYS_HZ 1000/* Bit-field values for MCCR1.
include/configs/CPCI2DP.h +0 -2
@@ -111,8 +111,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_LOOPW 1/* enable loopw command */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
include/configs/CPCI405.h +0 -2
@@ -124,8 +124,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_LOOPW 1/* enable loopw command */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
include/configs/CPCI4052.h +0 -2
@@ -133,8 +133,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING /* add command line history */ #define CONFIG_LOOPW 1/* enable loopw command */
include/configs/CPCI405AB.h +0 -2
@@ -132,8 +132,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING /* add command line history */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
include/configs/CPCI405DT.h +0 -2
@@ -134,8 +134,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_LOOPW 1/* enable loopw command */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
include/configs/CPCI750.h +0 -1
@@ -219,7 +219,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00300000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decr freq: 1ms ticks */ #define CONFIG_SYS_BUS_CLK 133000000/* 133 MHz (CPU = 5*Bus = 666MHz) */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
include/configs/CPCIISER4.h +0 -2
@@ -111,8 +111,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /*-----------------------------------------------------------------------
include/configs/CPU86.h +0 -2
@@ -186,8 +186,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100/* "bad" address */ /*
include/configs/CPU87.h +0 -2
@@ -200,8 +200,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100/* "bad" address */ #define CONFIG_LOOPW
include/configs/CRAYL1.h +0 -1
@@ -70,7 +70,6 @@#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1#define CONFIG_IDENT_STRING "Cray L1"#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ #define CONFIG_SYS_HUSH_PARSER 1#define CONFIG_SOURCE 1
include/configs/CU824.h +0 -1
@@ -144,7 +144,6 @@*/ #define CONFIG_SYS_CLK_FREQ 33000000 -#define CONFIG_SYS_HZ 1000/* Bit-field values for MCCR1. */
include/configs/DB64360.h +0 -1
@@ -300,7 +300,6 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"#define CONFIG_SYS_LOAD_ADDR 0x00400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decr freq: 1ms ticks */ /*ronen - this the Sys clock (cpu bus,internal dram and SDRAM) */ #define CONFIG_SYS_BUS_CLK 133000000/* 133 MHz (CPU = 5*Bus = 666MHz) */
include/configs/DB64460.h +0 -1
@@ -238,7 +238,6 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"#define CONFIG_SYS_LOAD_ADDR 0x00400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decr freq: 1ms ticks */ /*ronen - this the Sys clock (cpu bus,internal dram and SDRAM) */ #define CONFIG_SYS_BUS_CLK 133000000/* 133 MHz (CPU = 5*Bus = 666MHz) */
include/configs/DP405.h +0 -2
@@ -98,8 +98,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1/* include version env variable */
include/configs/DU405.h +0 -2
@@ -115,8 +115,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_SYS_RX_ETH_BUFFER 16/* use 16 rx buffer on 405 emac */
include/configs/DU440.h +0 -2
@@ -327,8 +327,6 @@ int du440_phy_addr(int devnum);#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_LOOPW 1/* enable loopw command */ #define CONFIG_MX_CYCLIC 1/* enable mdc/mwc commands */
include/configs/ELPPC.h +0 -2
@@ -96,8 +96,6 @@#define CONFIG_SYS_LOAD_ADDR 0x1000000/* default load address */ -#define CONFIG_SYS_HZ 1000/* dec. freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }/*
include/configs/ELPT860.h +0 -2
@@ -120,8 +120,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Environment Variables and Storages */
include/configs/EP88x.h +0 -2
@@ -77,8 +77,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* Default load address */ -#define CONFIG_SYS_HZ 1000/* Decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero) */
include/configs/ESTEEM192E.h +0 -2
@@ -84,8 +84,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/EVB64260.h +0 -2
@@ -124,8 +124,6 @@#define CONFIG_SYS_MEMTEST_END 0x00C00000/* 4 ... 12 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x00300000/* default load address */ - -#define CONFIG_SYS_HZ 1000/* decr freq: 1ms ticks */ #define CONFIG_SYS_BUS_CLK 100000000/* 100 MHz */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
include/configs/EXBITGEN.h +0 -2
@@ -116,8 +116,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * PCI stuff *-----------------------------------------------------------------------
include/configs/FADS823.h +0 -2
@@ -152,8 +152,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/FADS850SAR.h +0 -2
@@ -98,8 +98,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/FLAGADM.h +0 -2
@@ -94,8 +94,6 @@#define CONFIG_SYS_LOAD_ADDR 0x40040000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/FPS850L.h +0 -2
@@ -130,8 +130,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/FPS860L.h +0 -2
@@ -130,8 +130,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/G2000.h +0 -2
@@ -150,8 +150,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_BOOTDELAY 3/* autoboot after 3 seconds */
include/configs/GEN860T.h +0 -5
@@ -310,11 +310,6 @@#define CONFIG_SYS_LOAD_ADDR 0x01000000/* -* Set decrementer frequency (1 ms ticks) -*/ -#define CONFIG_SYS_HZ 1000 - -/* * Device memory map (after SDRAM remap to 0x0): * * CS Device Base Addr Size
include/configs/GENIETV.h +0 -2
@@ -142,8 +142,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }/*
include/configs/HH405.h +0 -2
@@ -175,8 +175,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1/* include version env variable */
include/configs/HIDDEN_DRAGON.h +0 -1
@@ -70,7 +70,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ /*----------------------------------------------------------------------- * PCI stuff
include/configs/HUB405.h +0 -2
@@ -117,8 +117,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1/* include version env variable */
include/configs/HWW1U1A.h +0 -2
@@ -53,8 +53,6 @@/* Enable IRQs and watchdog with a 1000Hz system decrementer */ #define CONFIG_CMD_IRQ -#define CONFIG_SYS_HZ 1000 -/* -------------------------------------------------------------------- */
include/configs/ICU862.h +0 -2
@@ -153,8 +153,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00100000 -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/IDS8247.h +0 -2
@@ -196,8 +196,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC/* "bad" address */ /*
include/configs/IP860.h +0 -2
@@ -116,8 +116,6 @@#define CONFIG_SYS_PIO_MODE 0/* IDE interface in PIO Mode 0 */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/IPHASE4539.h +0 -2
@@ -154,8 +154,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_RESET_ADDRESS 0x04400000#define CONFIG_MISC_INIT_R 1/* We need misc_init_r() */
include/configs/ISPAN.h +0 -2
@@ -141,8 +141,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* Default load address */ -#define CONFIG_SYS_HZ 1000/* Decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_RESET_ADDRESS 0x09900000#define CONFIG_MISC_INIT_R /* We need misc_init_r() */
include/configs/IVML24.h +0 -2
@@ -111,8 +111,6 @@#define CONFIG_SYS_PC_ETH_RESET ((ushort)0x0010)/* PC 11 */ #define CONFIG_SYS_PC_IDE_RESET ((ushort)0x0020)/* PC 10 */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/IVMS8.h +0 -2
@@ -108,8 +108,6 @@#define CONFIG_SYS_PC_ETH_RESET ((ushort)0x0010)/* PC 11 */ #define CONFIG_SYS_PC_IDE_RESET ((ushort)0x0020)/* PC 10 */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/IceCube.h +0 -2
@@ -315,8 +315,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB )# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */
include/configs/JSE.h +0 -2
@@ -192,8 +192,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_PPC4XX #define CONFIG_SYS_I2C_PPC4XX_CH0
include/configs/KAREF.h +0 -3
@@ -283,7 +283,4 @@#define CONFIG_SYS_LOAD_ADDR 0x8000000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* use extended board_info */ -#define CONFIG_SYS_HZ 100/* decr freq: 1 ms ticks */ - -#endif /* __CONFIG_H */
include/configs/KUP4K.h +0 -2
@@ -172,8 +172,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 115200 }#define CONFIG_SYS_CONSOLE_INFO_QUIET 1
include/configs/KUP4X.h +0 -2
@@ -191,8 +191,6 @@#define CONFIG_SYS_MEMTEST_END 0x003C00000/* 4 ... 60 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x200000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 115200 }#define CONFIG_SYS_CONSOLE_INFO_QUIET 1
include/configs/M5208EVBE.h +0 -1
@@ -113,7 +113,6 @@#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Arg Buf Sz */ #define CONFIG_SYS_LOAD_ADDR 0x40010000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 166666666/* CPU Core Clock */ #define CONFIG_SYS_PLL_ODR 0x36#define CONFIG_SYS_PLL_FDR 0x7D
include/configs/M52277EVB.h +0 -2
@@ -176,8 +176,6 @@#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_MBAR 0xFC000000/*
include/configs/M5235EVB.h +0 -1
@@ -133,7 +133,6 @@#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE+0x20000) -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 75000000#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 2
include/configs/M5249EVB.h +0 -2
@@ -69,8 +69,6 @@#define CONFIG_SYS_MEMTEST_START 0x400#define CONFIG_SYS_MEMTEST_END 0x380000 -#define CONFIG_SYS_HZ 1000 -/* * Clock configuration: enable only one of the following options */
include/configs/M5253DEMO.h +0 -2
@@ -124,8 +124,6 @@ TABILITY or FITNESS FO04-2007 Freescale Semiconductor, Inc.#define CONFIG_SYS_MEMTEST_START 0x400#define CONFIG_SYS_MEMTEST_END 0x380000 -#define CONFIG_SYS_HZ 1000 -#undef CONFIG_SYS_PLL_BYPASS/* bypass PLL for test purpose */ #define CONFIG_SYS_FAST_CLK #ifdef CONFIG_SYS_FAST_CLK
include/configs/M5253EVBE.h +0 -2
@@ -93,8 +93,6 @@#define CONFIG_SYS_MEMTEST_START 0x400#define CONFIG_SYS_MEMTEST_END 0x380000 -#define CONFIG_SYS_HZ 1000 -#undef CONFIG_SYS_PLL_BYPASS/* bypass PLL for test purpose */ #define CONFIG_SYS_FAST_CLK #ifdef CONFIG_SYS_FAST_CLK
include/configs/M5272C3.h +0 -1
@@ -129,7 +129,6 @@#define CONFIG_SYS_LOAD_ADDR 0x20000#define CONFIG_SYS_MEMTEST_START 0x400#define CONFIG_SYS_MEMTEST_END 0x380000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 66000000/*
include/configs/M5275EVB.h +0 -1
@@ -139,7 +139,6 @@"save\0" \ "" -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 150000000/*
include/configs/M5282EVB.h +0 -1
@@ -117,7 +117,6 @@#define CONFIG_SYS_MEMTEST_START 0x400#define CONFIG_SYS_MEMTEST_END 0x380000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 64000000/* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */
include/configs/M53017EVB.h +0 -1
@@ -133,7 +133,6 @@#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Arg Buf Sz */ #define CONFIG_SYS_LOAD_ADDR 0x40010000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 80000000#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3
include/configs/M5329EVB.h +0 -1
@@ -126,7 +126,6 @@#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x40010000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 80000000#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3
include/configs/M5373EVB.h +0 -1
@@ -126,7 +126,6 @@#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x40010000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK 80000000#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3
include/configs/M54418TWR.h +0 -2
@@ -253,8 +253,6 @@#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_MBAR 0xFC000000/*
include/configs/M54451EVB.h +0 -2
@@ -187,8 +187,6 @@#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_MBAR 0xFC000000/*
include/configs/M54455EVB.h +0 -2
@@ -246,8 +246,6 @@#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_MBAR 0xFC000000/*
include/configs/M5475EVB.h +0 -1
@@ -172,7 +172,6 @@#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00010000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK CONFIG_SYS_BUSCLK#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 2
include/configs/M5485EVB.h +0 -1
@@ -158,7 +158,6 @@#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00010000 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_CLK CONFIG_SYS_BUSCLK#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 2
include/configs/MBX.h +0 -2
@@ -98,8 +98,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/MBX860T.h +0 -2
@@ -72,8 +72,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/MERGERBOX.h +0 -1
@@ -367,7 +367,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000#define CONFIG_LOADS_ECHO 1#define CONFIG_SYS_LOADS_BAUD_CHANGE 1
include/configs/METROBOX.h +0 -3
@@ -348,7 +348,4 @@#define CONFIG_SYS_LOAD_ADDR 0x8000000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* use extended board_info */ -#define CONFIG_SYS_HZ 100/* decr freq: 1 ms ticks */ - -#endif /* __CONFIG_H */
include/configs/MHPC.h +0 -2
@@ -144,8 +144,6 @@#define CONFIG_SYS_LOAD_ADDR 0x300000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/MIP405.h +0 -2
@@ -180,8 +180,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * PCI stuff *-----------------------------------------------------------------------
include/configs/MOUSSE.h +0 -1
@@ -153,7 +153,6 @@#define CONFIG_SYS_CLK_FREQ 33000000/* external frequency to pll */ #define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 2 -#define CONFIG_SYS_HZ 1000#define CONFIG_SYS_ETH_DEV_FN 0x00#define CONFIG_SYS_ETH_IOBASE 0x00104000
include/configs/MPC8260ADS.h +0 -2
@@ -287,8 +287,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }#define CONFIG_SYS_FLASH_BASE 0xff800000
include/configs/MPC8266ADS.h +0 -2
@@ -229,8 +229,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }#define CONFIG_SYS_FLASH_BASE 0xFE000000
include/configs/MPC8308RDB.h +0 -1
@@ -471,7 +471,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8313ERDB.h +0 -1
@@ -520,7 +520,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8315ERDB.h +0 -1
@@ -532,7 +532,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8323ERDB.h +0 -1
@@ -368,7 +368,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC832XEMDS.h +0 -1
@@ -454,7 +454,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8349EMDS.h +0 -1
@@ -520,7 +520,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8349ITX.h +0 -1
@@ -562,7 +562,6 @@ boards, we say we have two, but don't display a message if we find only one. */#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8360EMDS.h +0 -1
@@ -557,7 +557,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8360ERDK.h +0 -1
@@ -418,7 +418,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC837XEMDS.h +0 -1
@@ -536,7 +536,6 @@ extern int board_pci_host_broken(void);#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC837XERDB.h +0 -1
@@ -551,7 +551,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8536DS.h +0 -1
@@ -730,7 +730,6 @@ + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8540ADS.h +0 -1
@@ -387,7 +387,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8541CDS.h +0 -1
@@ -400,7 +400,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8544DS.h +0 -1
@@ -431,7 +431,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8548CDS.h +0 -1
@@ -525,7 +525,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8555CDS.h +0 -1
@@ -398,7 +398,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8560ADS.h +0 -1
@@ -428,7 +428,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8568MDS.h +0 -1
@@ -420,7 +420,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8569MDS.h +0 -1
@@ -556,7 +556,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_SYS_MAXARGS 32/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8572DS.h +0 -1
@@ -670,7 +670,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8610HPCD.h +0 -1
@@ -508,7 +508,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MPC8641HPCN.h +0 -1
@@ -661,7 +661,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/MUSENKI.h +0 -1
@@ -151,7 +151,6 @@*/ #define CONFIG_SYS_CLK_FREQ 33333333/* external frequency to pll */ -#define CONFIG_SYS_HZ 1000/* Bit-field values for MCCR1. */
include/configs/MVBC_P.h +0 -2
@@ -266,8 +266,6 @@#define CONFIG_SYS_MEMTEST_START 0x00800000#define CONFIG_SYS_MEMTEST_END 0x02f00000 -#define CONFIG_SYS_HZ 1000 -/* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x02000000/* default location for tftp and bootm */
include/configs/MVBLM7.h +0 -1
@@ -292,7 +292,6 @@ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* * For booting Linux, the board info and command line data
include/configs/MVBLUE.h +0 -1
@@ -209,7 +209,6 @@*/ #define CONFIG_SYS_CLK_FREQ 33000000 -#define CONFIG_SYS_HZ 10000/* Bit-field values for MCCR1. */ #define CONFIG_SYS_ROMNAL 7
include/configs/MVS1.h +0 -2
@@ -103,8 +103,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/MVSMR.h +0 -2
@@ -236,8 +236,6 @@#define CONFIG_SYS_MEMTEST_START 0x00800000#define CONFIG_SYS_MEMTEST_END 0x02f00000 -#define CONFIG_SYS_HZ 1000 -/* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x02000000/* default location for tftp and bootm */
include/configs/MigoR.h +0 -1
@@ -124,6 +124,5 @@/* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333#define CONFIG_SYS_TMU_CLK_DIV (4)/* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ 1000#endif /* __MIGO_R_H */
include/configs/NETPHONE.h +0 -2
@@ -136,8 +136,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/NETTA.h +0 -2
@@ -149,8 +149,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/NETTA2.h +0 -2
@@ -137,8 +137,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/NETVIA.h +0 -2
@@ -119,8 +119,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/NSCU.h +0 -2
@@ -138,8 +138,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/NX823.h +0 -2
@@ -83,8 +83,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/OCRTC.h +0 -2
@@ -107,8 +107,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /*-----------------------------------------------------------------------
include/configs/ORSG.h +0 -2
@@ -105,8 +105,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /*-----------------------------------------------------------------------
include/configs/P1010RDB.h +0 -1
@@ -675,7 +675,6 @@ extern unsigned long get_sdram_size(void);/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* dec freq: 1ms ticks */ /* * Internal Definitions
include/configs/P1022DS.h +0 -1
@@ -715,7 +715,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_MAXARGS 16#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* * For booting Linux, the board info and command line data
include/configs/P1023RDB.h +0 -1
@@ -323,7 +323,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/P1023RDS.h +0 -1
@@ -459,7 +459,6 @@ extern unsigned long get_clock_freq(void);#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/P1_P2_RDB.h +0 -1
@@ -596,7 +596,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/P2020COME.h +0 -1
@@ -422,7 +422,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms tick */ /* * For booting Linux, the board info and command line data
include/configs/P2020DS.h +0 -1
@@ -660,7 +660,6 @@#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/P2041RDB.h +0 -1
@@ -667,7 +667,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/P3G4.h +0 -2
@@ -150,8 +150,6 @@#define CONFIG_SYS_MEMTEST_END 0x00C00000/* 4 ... 12 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x00300000/* default load address */ - -#define CONFIG_SYS_HZ 1000/* decr freq: 1ms ticks */ #define CONFIG_SYS_BUS_CLK 133000000/* 133 MHz */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
include/configs/PATI.h +0 -2
@@ -94,8 +94,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* Decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 1250000 }
include/configs/PCI405.h +0 -2
@@ -110,8 +110,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#undef CONFIG_ZERO_BOOTDELAY_CHECK/* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1/* include version env variable */
include/configs/PCI5441.h +0 -1
@@ -101,7 +101,6 @@* If the default period is acceptable, TMRCNT can be left undefined. * TMRMS represents the desired mecs per tick (msecs per interrupt). *----------------------------------------------------------------------*/ -#define CONFIG_SYS_HZ 1000/* Always 1000 */ #define CONFIG_SYS_LOW_RES_TIMER #define CONFIG_SYS_NIOS_TMRBASE 0x00920860/* Tick timer base addr */ #define CONFIG_SYS_NIOS_TMRIRQ 3/* Timer IRQ num */
include/configs/PIP405.h +0 -2
@@ -173,8 +173,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * PCI stuff *-----------------------------------------------------------------------
include/configs/PK1C20.h +0 -1
@@ -111,7 +111,6 @@* If the default period is acceptable, TMRCNT can be left undefined. * TMRMS represents the desired mecs per tick (msecs per interrupt). *----------------------------------------------------------------------*/ -#define CONFIG_SYS_HZ 1000/* Always 1000 */ #define CONFIG_SYS_LOW_RES_TIMER #define CONFIG_SYS_NIOS_TMRBASE 0x02120820/* Tick timer base addr */ #define CONFIG_SYS_NIOS_TMRIRQ 3/* Timer IRQ num */
include/configs/PLU405.h +0 -2
@@ -134,8 +134,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_BOOTDELAY 3/* autoboot after 3 seconds */
include/configs/PM520.h +0 -2
@@ -266,8 +266,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB )# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */
include/configs/PM826.h +0 -2
@@ -183,8 +183,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC/* "bad" address */ /*
include/configs/PM828.h +0 -2
@@ -183,8 +183,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC/* "bad" address */ /*
include/configs/PMC405.h +0 -2
@@ -128,8 +128,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_LOOPW 1/* enable loopw command */
include/configs/PMC405DE.h +0 -2
@@ -104,8 +104,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_LOOPW 1/* enable loopw command */ #define CONFIG_MX_CYCLIC 1/* enable mdc/mwc commands */
include/configs/PMC440.h +0 -2
@@ -388,8 +388,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_LOOPW 1/* enable loopw command */ #define CONFIG_MX_CYCLIC 1/* enable mdc/mwc commands */
include/configs/PN62.h +0 -1
@@ -92,7 +92,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ #define CONFIG_PRAM 1024/* reserve 1 MB protected RAM */
include/configs/PPChameleonEVB.h +0 -2
@@ -194,8 +194,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /*-----------------------------------------------------------------------
include/configs/QS823.h +0 -2
@@ -236,8 +236,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/QS850.h +0 -2
@@ -236,8 +236,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/QS860T.h +0 -2
@@ -146,8 +146,6 @@ CONFIG_SPI#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/R360MPI.h +0 -2
@@ -149,8 +149,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * JFFS2 partitions */
include/configs/RBC823.h +0 -2
@@ -134,8 +134,6 @@#define CONFIG_SYS_LOAD_ADDR 0x0100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/RPXClassic.h +0 -2
@@ -116,8 +116,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/RPXlite.h +0 -2
@@ -115,8 +115,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/RPXlite_DW.h +0 -2
@@ -162,8 +162,6 @@#define CONFIG_SYS_MEMTEST_END 0x00C0000/* 4 ... 12 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/RPXsuper.h +0 -1
@@ -214,7 +214,6 @@#define CONFIG_CLOCKS_IN_MHZ 1/* clocks passsed to Linux in MHz */ #define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ /* * Low Level Configuration Settings
include/configs/RRvision.h +0 -2
@@ -160,8 +160,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/Rattler.h +0 -2
@@ -170,8 +170,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }#define CONFIG_SYS_FLASH_BASE 0xFE000000
include/configs/SIMPC8313.h +0 -1
@@ -366,7 +366,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data
include/configs/SM850.h +0 -2
@@ -91,8 +91,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/SPD823TS.h +0 -2
@@ -103,8 +103,6 @@#define CONFIG_SYS_PC_IDE_RESET ((ushort)0x0008)/* PC 12 */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/SXNI855T.h +0 -2
@@ -170,8 +170,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00100000 -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/Sandpoint8240.h +0 -1
@@ -104,7 +104,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ /*----------------------------------------------------------------------- * PCI stuff
include/configs/Sandpoint8245.h +0 -1
@@ -72,7 +72,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ /*----------------------------------------------------------------------- * PCI stuff
include/configs/TASREG.h +0 -2
@@ -84,8 +84,6 @@#define CONFIG_SYS_MEMTEST_START 0x400#define CONFIG_SYS_MEMTEST_END 0x380000 -#define CONFIG_SYS_HZ 1000 -/* * Clock configuration: enable only one of the following options */
include/configs/TB5200.h +0 -2
@@ -410,8 +410,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Enable loopw command. */
include/configs/TK885D.h +0 -2
@@ -175,8 +175,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Enable loopw command. */
include/configs/TOP5200.h +0 -2
@@ -332,8 +332,6 @@#define CONFIG_SYS_LOAD_ADDR 0x200000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB )# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */
include/configs/TOP860.h +0 -1
@@ -68,7 +68,6 @@#define CONFIG_SYS_CPUCLOCK CONFIG_SYSCLK#define CONFIG_SYS_BRGCLOCK CONFIG_SYSCLK#define CONFIG_SYS_BUSCLOCK (CONFIG_SYSCLK >> CONFIG_EBDF) -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ #define CONFIG_8xx_GCLK_FREQ CONFIG_SYSCLK/*-----------------------------------------------------------------------
include/configs/TQM5200.h +0 -2
@@ -632,8 +632,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Enable loopw command. */
include/configs/TQM823L.h +0 -2
@@ -146,8 +146,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/TQM823M.h +0 -2
@@ -141,8 +141,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/TQM8260.h +0 -2
@@ -247,8 +247,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_RESET_ADDRESS 0xFFFFFFFC/* "bad" address */ /*
include/configs/TQM8272.h +0 -2
@@ -311,8 +311,6 @@#define CONFIG_SYS_LOAD_ADDR 0x300000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_RESET_ADDRESS 0x40000104/* "bad" address */ /*
include/configs/TQM834x.h +0 -1
@@ -334,7 +334,6 @@#define CONFIG_SYS_MAXARGS 16/* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */ #undef CONFIG_WATCHDOG/* watchdog disabled */
include/configs/TQM850L.h +0 -2
@@ -130,8 +130,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/TQM850M.h +0 -2
@@ -131,8 +131,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/TQM855L.h +0 -2
@@ -134,8 +134,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/TQM855M.h +0 -2
@@ -164,8 +164,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/TQM860L.h +0 -2
@@ -133,8 +133,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/TQM860M.h +0 -2
@@ -134,8 +134,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/TQM862L.h +0 -2
@@ -137,8 +137,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/TQM862M.h +0 -2
@@ -137,8 +137,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/TQM866M.h +0 -2
@@ -177,8 +177,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Low Level Configuration Settings * (address mappings, register initial values, etc.)
include/configs/TQM885D.h +0 -2
@@ -173,8 +173,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/* * Enable loopw command. */
include/configs/Total5200.h +0 -2
@@ -294,8 +294,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_CACHELINE_SIZE 32/* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB )# define CONFIG_SYS_CACHELINE_SHIFT 5/* log base 2 of the above value */
include/configs/VCMA9.h +0 -1
@@ -162,7 +162,6 @@#define CONFIG_SYS_LOAD_ADDR 0x30800000/* we configure PWM Timer 4 to 1ms 1000Hz */ -#define CONFIG_SYS_HZ 1000/* support additional compression methods */ #define CONFIG_BZIP2
include/configs/VOH405.h +0 -2
@@ -132,8 +132,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1/* include version env variable */
include/configs/VOM405.h +0 -2
@@ -119,8 +119,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
include/configs/VoVPN-GW.h +0 -1
@@ -232,7 +232,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00100000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_HZ 1000/* configure flash */ #define CONFIG_SYS_FLASH_BASE 0xff800000
include/configs/W7OLMC.h +0 -2
@@ -126,8 +126,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* use extended board_info (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * PCI stuff *-----------------------------------------------------------------------
include/configs/W7OLMG.h +0 -2
@@ -134,8 +134,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* use extended board_info (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -/*----------------------------------------------------------------------- * PCI stuff *-----------------------------------------------------------------------
include/configs/WUH405.h +0 -2
@@ -121,8 +121,6 @@#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ #define CONFIG_SYS_EXTBDINFO 1/* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1/* include version env variable */
include/configs/ZPC1900.h +0 -2
@@ -154,8 +154,6 @@#define CONFIG_SYS_LOAD_ADDR 0x400000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }#define CONFIG_SYS_SDRAM_BASE 0x00000000
include/configs/ZUMA.h +0 -2
@@ -146,8 +146,6 @@#define CONFIG_SYS_LOAD_ADDR 0x00300000/* default load address */ -#define CONFIG_SYS_HZ 1000/* decr freq: 1ms ticks */ -#define CONFIG_SYS_BUS_CLK 133000000/* 133 MHz */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
Signature · 1 line
1.8.1.2