Skip to contentSkip to conversation

u-boot-glsdk: Update to latest fixes

PATCH In review Mrinmayee Hingolikar 3 participants 5 messages Oct 21, 2013 – Nov 22, 2013

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 u-boot-glsdk: Update to latest fixes

* Migration of u-boot code to omapzoom.org. The development tree is shared between the Linux and Android teams.This enables a common u-boot development platform for both the teams for better alignment.
* Enable UART boot mode for dra7xx
* Add VIP,VPE and Ethernet crossbar setting for dra7xx
* Add SPL API, QSPI, and serial flash support of dra7xx

v2:

* Update to conditional assignment for BRANCH and SRCREV

---
 recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb +3 -3
index d60ef44..1805020 100644
@@ -6,11 +6,11 @@ PR = "r0+gitr${SRCPV}"
 
 DEFAULT_PREFERENCE = "-1"
 
-SRC_URI = "git://git.ti.com/glsdk/glsdk-u-boot.git;protocol=git;branch=${BRANCH}"
+SRC_URI = "git://git.omapzoom.org/repo/u-boot.git;protocol=git;branch=${BRANCH}"
 
-BRANCH ?= "master"
+BRANCH ?= "p-ti-u-boot-2013.04"
 
-SRCREV = "81836e8cc84bd6523d9a4e187965dcd1633c4bc9"
+SRCREV ?= "76447484441a4b8e00840a2bde74e66dbac9e631"
 
 SPL_BINARY = "MLO"
 SPL_UART_BINARY = "u-boot-spl.bin"
Signature · 1 line
1.7.9.5
Acked-by on v2 1/1
#1 lore raw
Quoted 54 lines

-----Original Message-----
From: [email protected] [mailto:meta-ti- [email protected]] On Behalf Of Hingolikar, Mrinmayee
Sent: Monday, October 21, 2013 7:57 AM
To: [email protected]
Subject: [meta-ti] [PATCHv2] u-boot-glsdk: Update to latest fixes

* Migration of u-boot code to omapzoom.org. The development tree is shared
between the Linux and Android teams.This enables a common u-
boot development
platform for both the teams for better alignment.
* Enable UART boot mode for dra7xx
* Add VIP,VPE and Ethernet crossbar setting for dra7xx
* Add SPL API, QSPI, and serial flash support of dra7xx

v2:

* Update to conditional assignment for BRANCH and SRCREV

---
recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb | 6 +++---

1 file changed, 3 insertions(+), 3 deletions(-)
recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb +0 -0
index d60ef44..1805020 100644
@@ -6,11 +6,11 @@ PR = "r0+gitr${SRCPV}"
 

DEFAULT_PREFERENCE = "-1"

-SRC_URI = "git://git.ti.com/glsdk/glsdk-u-
boot.git;protocol=git;branch=${BRANCH}"
+SRC_URI = "git://git.omapzoom.org/repo/u-
boot.git;protocol=git;branch=${BRANCH}"

recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb +2 -2
-BRANCH ?= "master"
+BRANCH ?= "p-ti-u-boot-2013.04"
 
-SRCREV = "81836e8cc84bd6523d9a4e187965dcd1633c4bc9"
+SRCREV ?= "76447484441a4b8e00840a2bde74e66dbac9e631"

SPL_BINARY = "MLO"
SPL_UART_BINARY = "u-boot-spl.bin"
--
1.7.9.5

_______________________________________________
meta-ti mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-ti

#2 lore raw
In reply to Mrinmayee Hingolikar
Quoted 10 lines · Mrinmayee Hingolikar

* Migration of u-boot code to omapzoom.org. The development tree is shared between the Linux and Android teams.This enables a common u-boot development platform for both the teams for better alignment.
* Enable UART boot mode for dra7xx
* Add VIP,VPE and Ethernet crossbar setting for dra7xx
* Add SPL API, QSPI, and serial flash support of dra7xx

v2:

* Update to conditional assignment for BRANCH and SRCREV

Well, I guess I missed why it was necessary... I would understand BRANCH, but not SRCREV... BTW, patch revision history should be hidden and not go into the main description, so should appear after the --- delimiter.

Quoted 11 lines
---
 recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb +0 -0
index d60ef44..1805020 100644
@@ -6,11 +6,11 @@ PR = "r0+gitr${SRCPV}"
 

recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb PR = "r0+gitr${SRCPV}" · line 13

Quoted 10 lines
recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb +3 -3
 DEFAULT_PREFERENCE = "-1"
 
-SRC_URI = "git://git.ti.com/glsdk/glsdk-u-boot.git;protocol=git;branch=${BRANCH}"
+SRC_URI = "git://git.omapzoom.org/repo/u-boot.git;protocol=git;branch=${BRANCH}"
 
-BRANCH ?= "master"
+BRANCH ?= "p-ti-u-boot-2013.04"
 
-SRCREV = "81836e8cc84bd6523d9a4e187965dcd1633c4bc9"
+SRCREV ?= "76447484441a4b8e00840a2bde74e66dbac9e631"

One thing is missing - PR bump. You are updating source tree and the commit ID is lower than the previous one, hence if you would try to share the build where the old package exists, you may end up with the image that contains the old package and not the new one. Although, symlink in deploy would probably be correct...

Quoted 9 lines
recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb +0 -0
 SPL_BINARY = "MLO"
 SPL_UART_BINARY = "u-boot-spl.bin"
Signature · 6 lines
1.7.9.5

_______________________________________________
meta-ti mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-ti
#3 lore raw

Ping.

Quoted 60 lines · Denys Dmytriyenko
Quoted 10 lines · Mrinmayee Hingolikar

* Migration of u-boot code to omapzoom.org. The development tree is shared between the Linux and Android teams.This enables a common u-boot development platform for both the teams for better alignment.
* Enable UART boot mode for dra7xx
* Add VIP,VPE and Ethernet crossbar setting for dra7xx
* Add SPL API, QSPI, and serial flash support of dra7xx

v2:

* Update to conditional assignment for BRANCH and SRCREV

Well, I guess I missed why it was necessary... I would understand BRANCH, but not SRCREV... BTW, patch revision history should be hidden and not go into the main description, so should appear after the --- delimiter.

Quoted 11 lines
---
 recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb +0 -0
index d60ef44..1805020 100644
@@ -6,11 +6,11 @@ PR = "r0+gitr${SRCPV}"
 

recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb PR = "r0+gitr${SRCPV}" · line 13

Quoted 10 lines
recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb +3 -3
 DEFAULT_PREFERENCE = "-1"
 
-SRC_URI = "git://git.ti.com/glsdk/glsdk-u-boot.git;protocol=git;branch=${BRANCH}"
+SRC_URI = "git://git.omapzoom.org/repo/u-boot.git;protocol=git;branch=${BRANCH}"
 
-BRANCH ?= "master"
+BRANCH ?= "p-ti-u-boot-2013.04"
 
-SRCREV = "81836e8cc84bd6523d9a4e187965dcd1633c4bc9"
+SRCREV ?= "76447484441a4b8e00840a2bde74e66dbac9e631"

One thing is missing - PR bump. You are updating source tree and the commit ID is lower than the previous one, hence if you would try to share the build where the old package exists, you may end up with the image that contains the old package and not the new one. Although, symlink in deploy would probably be correct...

Quoted 9 lines
recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb +0 -0
 SPL_BINARY = "MLO"
 SPL_UART_BINARY = "u-boot-spl.bin"
Signature · 6 lines
1.7.9.5

_______________________________________________
meta-ti mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-ti

_______________________________________________
meta-ti mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-ti

#4 lore raw

Never mind - ended up fixing it myself, as it's taking way too long...

Quoted 68 lines · Denys Dmytriyenko

Ping.

Quoted 51 lines · Denys Dmytriyenko
Quoted 10 lines · Mrinmayee Hingolikar

* Migration of u-boot code to omapzoom.org. The development tree is shared between the Linux and Android teams.This enables a common u-boot development platform for both the teams for better alignment.
* Enable UART boot mode for dra7xx
* Add VIP,VPE and Ethernet crossbar setting for dra7xx
* Add SPL API, QSPI, and serial flash support of dra7xx

v2:

* Update to conditional assignment for BRANCH and SRCREV

Well, I guess I missed why it was necessary... I would understand BRANCH, but not SRCREV... BTW, patch revision history should be hidden and not go into the main description, so should appear after the --- delimiter.

Quoted 11 lines
---
 recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb +0 -0
index d60ef44..1805020 100644
@@ -6,11 +6,11 @@ PR = "r0+gitr${SRCPV}"
 

recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb PR = "r0+gitr${SRCPV}" · line 13

Quoted 10 lines
recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb +3 -3
 DEFAULT_PREFERENCE = "-1"
 
-SRC_URI = "git://git.ti.com/glsdk/glsdk-u-boot.git;protocol=git;branch=${BRANCH}"
+SRC_URI = "git://git.omapzoom.org/repo/u-boot.git;protocol=git;branch=${BRANCH}"
 
-BRANCH ?= "master"
+BRANCH ?= "p-ti-u-boot-2013.04"
 
-SRCREV = "81836e8cc84bd6523d9a4e187965dcd1633c4bc9"
+SRCREV ?= "76447484441a4b8e00840a2bde74e66dbac9e631"

One thing is missing - PR bump. You are updating source tree and the commit ID is lower than the previous one, hence if you would try to share the build where the old package exists, you may end up with the image that contains the old package and not the new one. Although, symlink in deploy would probably be correct...

Quoted 5 lines
recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb +0 -0
 SPL_BINARY = "MLO"
 SPL_UART_BINARY = "u-boot-spl.bin"
Signature · 1 line
1.7.9.5
Quoted 9 lines
Quoted 4 lines

_______________________________________________
meta-ti mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-ti

_______________________________________________
meta-ti mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-ti

_______________________________________________
meta-ti mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-ti