u-boot-glsdk: Update to latest fixes
PATCH v2 1/1 u-boot-glsdk: Update to latest fixes
* Migration of u-boot code to omapzoom.org. The development tree is shared between the Linux and Android teams.This enables a common u-boot development platform for both the teams for better alignment.
* Enable UART boot mode for dra7xx
* Add VIP,VPE and Ethernet crossbar setting for dra7xx
* Add SPL API, QSPI, and serial flash support of dra7xx
v2:
* Update to conditional assignment for BRANCH and SRCREV
--- recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb +3 -3
@@ -6,11 +6,11 @@ PR = "r0+gitr${SRCPV}" DEFAULT_PREFERENCE = "-1" -SRC_URI = "git://git.ti.com/glsdk/glsdk-u-boot.git;protocol=git;branch=${BRANCH}" +SRC_URI = "git://git.omapzoom.org/repo/u-boot.git;protocol=git;branch=${BRANCH}" -BRANCH ?= "master" +BRANCH ?= "p-ti-u-boot-2013.04" -SRCREV = "81836e8cc84bd6523d9a4e187965dcd1633c4bc9" +SRCREV ?= "76447484441a4b8e00840a2bde74e66dbac9e631" SPL_BINARY = "MLO" SPL_UART_BINARY = "u-boot-spl.bin"
Signature · 1 line
1.7.9.5
Quoted 54 lines
-----Original Message-----
From: [email protected] [mailto:meta-ti- [email protected]] On Behalf Of Hingolikar, Mrinmayee
Sent: Monday, October 21, 2013 7:57 AM
To: [email protected]
Subject: [meta-ti] [PATCHv2] u-boot-glsdk: Update to latest fixes* Migration of u-boot code to omapzoom.org. The development tree is shared
between the Linux and Android teams.This enables a common u-
boot development
platform for both the teams for better alignment.
* Enable UART boot mode for dra7xx
* Add VIP,VPE and Ethernet crossbar setting for dra7xx
* Add SPL API, QSPI, and serial flash support of dra7xxv2:
* Update to conditional assignment for BRANCH and SRCREV
Signed-off-by Mrinmayee Hingolikar <[email protected]>---
recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb | 6 +++---1 file changed, 3 insertions(+), 3 deletions(-)recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb +0
-0@@ -6,11 +6,11 @@ PR = "r0+gitr${SRCPV}"
DEFAULT_PREFERENCE= "-1"-SRC_URI = "
git://git.ti.com/glsdk/glsdk-u-
boot.git;protocol=git;branch=${BRANCH}"
+SRC_URI = "git://git.omapzoom.org/repo/u-
boot.git;protocol=git;branch=${BRANCH}"recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb +2
-2-BRANCH ?= "master" +BRANCH ?= "p-ti-u-boot-2013.04" -SRCREV = "81836e8cc84bd6523d9a4e187965dcd1633c4bc9" +SRCREV ?= "76447484441a4b8e00840a2bde74e66dbac9e631"
SPL_BINARY= "MLO"SPL_UART_BINARY= "u-boot-spl.bin"
--
1.7.9.5_______________________________________________
meta-ti mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-ti
Quoted 10 lines · Mrinmayee Hingolikar
* Migration of u-boot code to omapzoom.org. The development tree is shared between the Linux and Android teams.This enables a common u-boot development platform for both the teams for better alignment.
* Enable UART boot mode for dra7xx
* Add VIP,VPE and Ethernet crossbar setting for dra7xx
* Add SPL API, QSPI, and serial flash support of dra7xxv2:
* Update to conditional assignment for BRANCH and SRCREV
Well, I guess I missed why it was necessary... I would understand BRANCH, but not SRCREV... BTW, patch revision history should be hidden and not go into the main description, so should appear after the --- delimiter.
Quoted 11 lines
Signed-off-by Mrinmayee Hingolikar <[email protected]>--- recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb +0
-0@@ -6,11 +6,11 @@ PR = "r0+gitr${SRCPV}"
recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb PR = "r0+gitr${SRCPV}" · line 13
Quoted 10 lines
recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb +3
-3DEFAULT_PREFERENCE = "-1" -SRC_URI = "git://git.ti.com/glsdk/glsdk-u-boot.git;protocol=git;branch=${BRANCH}" +SRC_URI = "git://git.omapzoom.org/repo/u-boot.git;protocol=git;branch=${BRANCH}" -BRANCH ?= "master" +BRANCH ?= "p-ti-u-boot-2013.04" -SRCREV = "81836e8cc84bd6523d9a4e187965dcd1633c4bc9" +SRCREV ?= "76447484441a4b8e00840a2bde74e66dbac9e631"
One thing is missing - PR bump. You are updating source tree and the commit ID is lower than the previous one, hence if you would try to share the build where the old package exists, you may end up with the image that contains the old package and not the new one. Although, symlink in deploy would probably be correct...
Quoted 9 lines
recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb +0
-0SPL_BINARY = "MLO" SPL_UART_BINARY = "u-boot-spl.bin"Signature · 6 lines
1.7.9.5 _______________________________________________ meta-ti mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-ti
Ping.
Quoted 60 lines · Denys Dmytriyenko
Quoted 10 lines · Mrinmayee Hingolikar
* Migration of u-boot code to omapzoom.org. The development tree is shared between the Linux and Android teams.This enables a common u-boot development platform for both the teams for better alignment.
* Enable UART boot mode for dra7xx
* Add VIP,VPE and Ethernet crossbar setting for dra7xx
* Add SPL API, QSPI, and serial flash support of dra7xxv2:
* Update to conditional assignment for BRANCH and SRCREV
Well, I guess I missed why it was necessary... I would understand BRANCH, but not SRCREV... BTW, patch revision history should be hidden and not go into the main description, so should appear after the --- delimiter.
Quoted 11 lines
Signed-off-by Mrinmayee Hingolikar <[email protected]>--- recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb +0
-0@@ -6,11 +6,11 @@ PR = "r0+gitr${SRCPV}"recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb PR = "r0+gitr${SRCPV}" · line 13
Quoted 10 lines
recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb +3
-3DEFAULT_PREFERENCE = "-1" -SRC_URI = "git://git.ti.com/glsdk/glsdk-u-boot.git;protocol=git;branch=${BRANCH}" +SRC_URI = "git://git.omapzoom.org/repo/u-boot.git;protocol=git;branch=${BRANCH}" -BRANCH ?= "master" +BRANCH ?= "p-ti-u-boot-2013.04" -SRCREV = "81836e8cc84bd6523d9a4e187965dcd1633c4bc9" +SRCREV ?= "76447484441a4b8e00840a2bde74e66dbac9e631"One thing is missing - PR bump. You are updating source tree and the commit ID is lower than the previous one, hence if you would try to share the build where the old package exists, you may end up with the image that contains the old package and not the new one. Although, symlink in deploy would probably be correct...
Quoted 9 lines
recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb +0
-0SPL_BINARY = "MLO" SPL_UART_BINARY = "u-boot-spl.bin"Signature · 6 lines
1.7.9.5 _______________________________________________ meta-ti mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-ti_______________________________________________
meta-ti mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-ti
Never mind - ended up fixing it myself, as it's taking way too long...
Quoted 68 lines · Denys Dmytriyenko
Ping.
Quoted 51 lines · Denys Dmytriyenko
Quoted 10 lines · Mrinmayee Hingolikar
* Migration of u-boot code to omapzoom.org. The development tree is shared between the Linux and Android teams.This enables a common u-boot development platform for both the teams for better alignment.
* Enable UART boot mode for dra7xx
* Add VIP,VPE and Ethernet crossbar setting for dra7xx
* Add SPL API, QSPI, and serial flash support of dra7xxv2:
* Update to conditional assignment for BRANCH and SRCREV
Well, I guess I missed why it was necessary... I would understand BRANCH, but not SRCREV... BTW, patch revision history should be hidden and not go into the main description, so should appear after the --- delimiter.
Quoted 11 lines
Signed-off-by Mrinmayee Hingolikar <[email protected]>--- recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb +0
-0@@ -6,11 +6,11 @@ PR = "r0+gitr${SRCPV}"recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb PR = "r0+gitr${SRCPV}" · line 13
Quoted 10 lines
recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb +3
-3DEFAULT_PREFERENCE = "-1" -SRC_URI = "git://git.ti.com/glsdk/glsdk-u-boot.git;protocol=git;branch=${BRANCH}" +SRC_URI = "git://git.omapzoom.org/repo/u-boot.git;protocol=git;branch=${BRANCH}" -BRANCH ?= "master" +BRANCH ?= "p-ti-u-boot-2013.04" -SRCREV = "81836e8cc84bd6523d9a4e187965dcd1633c4bc9" +SRCREV ?= "76447484441a4b8e00840a2bde74e66dbac9e631"One thing is missing - PR bump. You are updating source tree and the commit ID is lower than the previous one, hence if you would try to share the build where the old package exists, you may end up with the image that contains the old package and not the new one. Although, symlink in deploy would probably be correct...
Quoted 5 lines
recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb +0
-0SPL_BINARY = "MLO" SPL_UART_BINARY = "u-boot-spl.bin"Signature · 1 line
1.7.9.5Quoted 9 lines
Quoted 4 lines
_______________________________________________
meta-ti mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-ti_______________________________________________
meta-ti mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-ti_______________________________________________
meta-ti mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-ti