PCI: imx6: increase link startup
Subsystems (2)
PATCH 1/1 PCI: imx6: increase link startup
An increase link startup delay is required when certain PCI switches are attached to the root complex. This was tested with a Pericom switch and a PLX switch.
From: Marek Vasut <[email protected]>
--- drivers/pci/host/pci-imx6.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pci/host/pci-imx6.c +1 -1
@@ -318,7 +318,7 @@ static void imx6_pcie_host_init(struct pcie_port *pp)while (!dw_pcie_link_up (pp)) {usleep_range (100 ,1000 ); count++; -if (count >=10 ) { +if (count >=200 ) {dev_err (pp->dev,"phy link never came up\n" ); dev_dbg(pp->dev, "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
Signature · 1 line
1.7.9.5
PATCH 1/1 PCI: imx6: increase link startup
Quoted 7 lines · Tim Harvey
An increase link startup delay is required when certain PCI switches are attached to the root complex. This was tested with a Pericom switch and a PLX switch.
From: Marek Vasut <[email protected]>
Signed-off-by Marek Vasut <[email protected]>Acked-by Tim Harvey <[email protected]>
Quoted 20 lines
--- drivers/pci/host/pci-imx6.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/pci/host/pci-imx6.c +1
-1@@ -318,7 +318,7 @@ static void imx6_pcie_host_init(struct pcie_port *pp)while (!dw_pcie_link_up (pp)) {usleep_range (100 ,1000 ); count++; -if (count >=10 ) { +if (count >=200 ) {dev_err (pp->dev,"phy link never came up\n" ); dev_dbg(pp->dev, "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",Signature · 1 line
1.7.9.5
Bjorn Helgaas
maintainerPATCH 1/1 PCI: imx6: increase link startup
In reply to Tim HarveyQuoted 7 lines · Tim Harvey
An increase link startup delay is required when certain PCI switches are attached to the root complex. This was tested with a Pericom switch and a PLX switch.
From: Marek Vasut <[email protected]>
Signed-off-by Marek Vasut <[email protected]>Acked-by Tim Harvey <[email protected]>
I applied this with Shawn's ack to my pci/host-imx6 branch for v3.13, thanks!
I assume the intent was that this patch was written by Marek, per the "From:" line you added above, so I fixed that in the patch so Marek appears as the author. Let me know if this is incorrect.
Quoted 20 lines
--- drivers/pci/host/pci-imx6.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/pci/host/pci-imx6.c +1
-1@@ -318,7 +318,7 @@ static void imx6_pcie_host_init(struct pcie_port *pp)while (!dw_pcie_link_up (pp)) {usleep_range (100 ,1000 ); count++; -if (count >=10 ) { +if (count >=200 ) {dev_err (pp->dev,"phy link never came up\n" ); dev_dbg(pp->dev, "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",Signature · 1 line
1.7.9.5
PATCH 1/1 PCI: imx6: increase link startup
Dear Bjorn Helgaas,
Quoted 9 lines · Tim Harvey
Quoted 7 lines
An increase link startup delay is required when certain PCI switches are attached to the root complex. This was tested with a Pericom switch and a PLX switch.
From: Marek Vasut <[email protected]>
Signed-off-by Marek Vasut <[email protected]>Acked-by Tim Harvey <[email protected]>
Quoted 6 lines
I applied this with Shawn's ack to my pci/host-imx6 branch for v3.13, thanks!
I assume the intent was that this patch was written by Marek, per the "From:" line you added above, so I fixed that in the patch so Marek appears as the author. Let me know if this is incorrect.
I'm really glad Tim split this patch while I am being totally unhelpful here on the PCIe front in last few days. Thank you!
Best regards,
Marek Vasut