ARM: shmobile: Configure r8a7791 PFC on Koelsch via DTS
Subsystems (2)
PATCH 1/1 ARM: shmobile: Configure r8a7791 PFC on Koelsch via DTS
From: Magnus Damm <[email protected]>
Configure the "D" set of data signals for SCIF0 and SCIF1 on the Koelsch board to setup pinctrl serial console bits.
Signed-off-by Magnus Damm <[email protected]>
---
arch/arm/boot/dts/r8a7791-koelsch-reference.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
arch/arm/boot/dts/r8a7791-koelsch-reference.dts +16 -0
@@ -30,3 +30,19 @@ #size-cells = <1>; }; }; + +&pfc { + pinctrl-0 = <&scif0_pins &scif1_pins>; + pinctrl-names = "default"; + + scif0_pins: serial0 { + renesas,groups = "scif0_data_d"; + renesas,function = "scif0"; + }; + + scif1_pins: serial1 { + renesas,groups = "scif1_data_d"; + renesas,function = "scif1"; + }; +}; +
PATCH 1/1 ARM: shmobile: Configure r8a7791 PFC on Koelsch via DTS
Quoted 5 lines · Magnus Damm
From: Magnus Damm <[email protected]>
Configure the "D" set of data signals for SCIF0 and SCIF1 on the Koelsch board to setup pinctrl serial console bits.
Signed-off-by Magnus Damm <[email protected]>
Thanks, I will queue this up after removing the trailing blank line that this patch introduces. Assuming all goes will I plan to push this and other updates today or tomorrow.
Quoted 28 lines
---
arch/arm/boot/dts/r8a7791-koelsch-reference.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)arch/arm/boot/dts/r8a7791-koelsch-reference.dts +16
-0@@ -30,3 +30,19 @@ #size-cells = <1>; }; }; + +&pfc { + pinctrl-0 = <&scif0_pins &scif1_pins>; + pinctrl-names = "default"; + + scif0_pins: serial0 { + renesas,groups = "scif0_data_d"; + renesas,function = "scif0"; + }; + + scif1_pins: serial1 { + renesas,groups = "scif1_data_d"; + renesas,function = "scif1"; + }; +}; +