ARM: DTS: omap4-sdp: Add regulator for LCD backlight (pwm-backlight)
PATCH 1/1 ARM: DTS: omap4-sdp: Add regulator for LCD backlight (pwm-backlight)
Since in DT booted kernel dummy regulators are no longer supported we need to provide valid phandle for the regulator needed by the backlight. On the board VBAT is used to power the LCD backlight(s).
---
Hi,
This patch is needed for 3.13 to get the LCD backlight to work again.
Regards,
Peter
arch/arm/boot/dts/omap4-sdp.dts | 1 + 1 file changed, 1 insertion(+)
arch/arm/boot/dts/omap4-sdp.dts +1 -0
@@ -104,6 +104,7 @@ 100 110 120 127 >; default-brightness-level = <13>; + power-supply = <&vbat>; }; sound {
Signature · 1 line
1.8.4.2
PATCH 1/1 ARM: DTS: omap4-sdp: Add regulator for LCD backlight (pwm-backlight)
Hi Peter,
Quoted 9 lines · Peter Ujfalusi
Since in DT booted kernel dummy regulators are no longer supported we need to provide valid phandle for the regulator needed by the backlight. On the board VBAT is used to power the LCD backlight(s).
Signed-off-by Peter Ujfalusi <[email protected]>---
Hi,This patch is needed for 3.13 to get the LCD backlight to work again.
OK, so this is a fix for the next -rc?
Regards,
Benoit
Quoted 20 lines
Regards,
Peterarch/arm/boot/dts/omap4-sdp.dts | 1 + 1 file changed, 1 insertion(+)arch/arm/boot/dts/omap4-sdp.dts +1
-0@@ -104,6 +104,7 @@ 100 110 120 127 >; default-brightness-level = <13>; + power-supply = <&vbat>; }; sound {
Signature · 4 lines
Beno?t Cousson BayLibre Embedded Linux Technology Lab www.baylibre.com
PATCH 1/1 ARM: DTS: omap4-sdp: Add regulator for LCD backlight (pwm-backlight)
Hi Benoit,
Quoted 7 lines · Benoit Cousson
Hi Peter,
Quoted 4 lines · Peter Ujfalusi
Since in DT booted kernel dummy regulators are no longer supported we need to provide valid phandle for the regulator needed by the backlight. On the board VBAT is used to power the LCD backlight(s).
Quoted 7 lines
Quoted 5 lines
Signed-off-by Peter Ujfalusi <[email protected]>---
Hi,This patch is needed for 3.13 to get the LCD backlight to work again.
OK, so this is a fix for the next -rc?
Yes, it would be really great if this can make it to the next -rc.
Quoted 26 lines
Regards,
BenoitQuoted 20 lines
Regards,
Peterarch/arm/boot/dts/omap4-sdp.dts | 1 + 1 file changed, 1 insertion(+)arch/arm/boot/dts/omap4-sdp.dts +1
-0@@ -104,6 +104,7 @@ 100 110 120 127 >; default-brightness-level = <13>; + power-supply = <&vbat>; }; sound {
Signature · 1 line
P?ter
PATCH 1/1 ARM: DTS: omap4-sdp: Add regulator for LCD backlight (pwm-backlight)
In reply to Peter UjfalusiQuoted 9 lines · Peter Ujfalusi
Since in DT booted kernel dummy regulators are no longer supported we need to provide valid phandle for the regulator needed by the backlight. On the board VBAT is used to power the LCD backlight(s).
Signed-off-by Peter Ujfalusi<[email protected]>---
Hi,This patch is needed for 3.13 to get the LCD backlight to work again.
Is this usage of power supply a mandatory requirement?
There is a thread which discusses this issue[1]:
http://www.spinics.net/lists/arm-kernel/msg288215.html
According to the above, regulator framework have support in 3.13-rc1 to returns
a dummy regulator if there is none specified in the dts data. Thierry told that there seems to be a bug in regulator in handling these case.
Though, I also posted a patch on pwm a couple of days ago[2] [2]: https://patchwork.kernel.org/patch/3246711/
I posted it without "power-supply" by testing it with the solution proposed in [1].
If I dont use the solution[1], it fails for me also.
PATCH 1/1 ARM: DTS: omap4-sdp: Add regulator for LCD backlight (pwm-backlight)
Quoted 21 lines · Sourav Poddar
Quoted 9 lines · Peter Ujfalusi
Since in DT booted kernel dummy regulators are no longer supported we need to provide valid phandle for the regulator needed by the backlight. On the board VBAT is used to power the LCD backlight(s).
Signed-off-by Peter Ujfalusi<[email protected]>---
Hi,This patch is needed for 3.13 to get the LCD backlight to work again.
Is this usage of power supply a mandatory requirement?
There is a thread which discusses this issue[1]:
http://www.spinics.net/lists/arm-kernel/msg288215.htmlAccording to the above, regulator framework have support in 3.13-rc1 to returns
a dummy regulator if there is none specified in the dts data. Thierry told that there seems to be a bug in regulator in handling these case.
Quoted 6 lines
Though, I also posted a patch on pwm a couple of days ago[2] [2]: https://patchwork.kernel.org/patch/3246711/
I posted it without "power-supply" by testing it with the solution proposed in [1].
If I dont use the solution[1], it fails for me also.
Hmm so if this is not needed, I'll mark this thread as read in my inbox. If you guys need it please repost.
Regards,
Tony