virtio_net: set multicast filter list to host
Subsystems (4)
PATCH 1/3 virtio_net: set multicast filter list to host
The virtio_net driver never sends the multicast address list to the host. This is because send command takes a pointer to scatter list to send but only inserts that one entry into the outgoing scatter list.
This bug has been there since:
commit f565a7c259d71cc186753653d978c646d2354b36
Author: Alex Williamson <[email protected]> Date: Wed Feb 4 09:02:45 2009 +0000
virtio_net: Add a MAC filter table
drivers/net/virtio_net.c +1 -1
@@ -893,7 +893,7 @@ static bool virtnet_send_command(structsg_init_one (&hdr, &ctrl,sizeof (ctrl)); sgs[out_num++] = &hdr; -if (out) +for (; out; out =sg_next (out)) sgs[out_num++] = out;if (in) sgs[out_num + in_num++] = in;
PATCH 2/3 virtio_net: remove unused parameter to send_command
All the code passes NULL for the last sg list (in). Simplify by just removing it.
drivers/net/virtio_net.c +13 -21
@@ -876,13 +876,12 @@ static netdev_tx_t start_xmit(struct sk_* never fail unless improperly formated. */ static bool virtnet_send_command (struct virtnet_info *vi,u8 class,u8 cmd, -struct scatterlist *out, -struct scatterlist *in) +struct scatterlist *out) {struct scatterlist *sgs[4 ], hdr, stat;struct virtio_net_ctrl_hdr ctrl;virtio_net_ctrl_ack status = ~0 ; -unsigned out_num =0 , in_num =0 , tmp; +unsigned out_num =0 , tmp;/* Caller should know better */ BUG_ON (!virtio_has_feature (vi->vdev,VIRTIO_NET_F_CTRL_VQ ));
@@ -895,16 +894,13 @@ static bool virtnet_send_command(structfor (; out; out =sg_next (out)) sgs[out_num++] = out; -if (in) - sgs[out_num + in_num++] = in;/* Add return status. */ sg_init_one (&stat, &status,sizeof (status)); - sgs[out_num + in_num++] = &stat; + sgs[out_num] = &stat; -BUG_ON (out_num + in_num >ARRAY_SIZE (sgs)); -BUG_ON (virtqueue_add_sgs (vi->cvq, sgs, out_num, in_num, vi,GFP_ATOMIC ) - <0 ); +BUG_ON (out_num +1 >ARRAY_SIZE (sgs)); +BUG_ON (virtqueue_add_sgs (vi->cvq, sgs, out_num,1 , vi,GFP_ATOMIC ) <0 );if (unlikely (!virtqueue_kick (vi->cvq)))return status ==VIRTIO_NET_OK ;
@@ -934,8 +930,7 @@ static int virtnet_set_mac_address(strucif (virtio_has_feature (vdev,VIRTIO_NET_F_CTRL_MAC_ADDR )) {sg_init_one (&sg, addr->sa_data, dev->addr_len);if (!virtnet_send_command (vi,VIRTIO_NET_CTRL_MAC , -VIRTIO_NET_CTRL_MAC_ADDR_SET , - &sg,NULL )) { +VIRTIO_NET_CTRL_MAC_ADDR_SET , &sg)) {dev_warn (&vdev->dev,"Failed to set mac address by vq command.\n" );return -EINVAL ;
@@ -1008,7 +1003,7 @@ static void virtnet_ack_link_announce(st {rtnl_lock ();if (!virtnet_send_command (vi,VIRTIO_NET_CTRL_ANNOUNCE , -VIRTIO_NET_CTRL_ANNOUNCE_ACK ,NULL ,NULL )) +VIRTIO_NET_CTRL_ANNOUNCE_ACK ,NULL ))dev_warn (&vi->dev->dev,"Failed to ack link announce.\n" );rtnl_unlock (); }
@@ -1026,7 +1021,7 @@ static int virtnet_set_queues(struct virsg_init_one (&sg, &s,sizeof (s));if (!virtnet_send_command (vi,VIRTIO_NET_CTRL_MQ , -VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET , &sg,NULL )) { +VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET , &sg)) {dev_warn (&dev->dev,"Fail to set num of queue pairs to %d\n" , queue_pairs);return -EINVAL ;
@@ -1076,16 +1071,14 @@ static void virtnet_set_rx_mode(struct nsg_init_one (sg, &promisc,sizeof (promisc));if (!virtnet_send_command (vi,VIRTIO_NET_CTRL_RX , -VIRTIO_NET_CTRL_RX_PROMISC , - sg,NULL )) +VIRTIO_NET_CTRL_RX_PROMISC , sg))dev_warn (&dev->dev,"Failed to %sable promisc mode.\n" , promisc ?"en" :"dis" );sg_init_one (sg, &allmulti,sizeof (allmulti));if (!virtnet_send_command (vi,VIRTIO_NET_CTRL_RX , -VIRTIO_NET_CTRL_RX_ALLMULTI , - sg,NULL )) +VIRTIO_NET_CTRL_RX_ALLMULTI , sg))dev_warn (&dev->dev,"Failed to %sable allmulti mode.\n" , allmulti ?"en" :"dis" );
@@ -1121,8 +1114,7 @@ static void virtnet_set_rx_mode(struct n sizeof(mac_data->entries) + (mc_count * ETH_ALEN));if (!virtnet_send_command (vi,VIRTIO_NET_CTRL_MAC , -VIRTIO_NET_CTRL_MAC_TABLE_SET , - sg,NULL )) +VIRTIO_NET_CTRL_MAC_TABLE_SET , sg))dev_warn (&dev->dev,"Failed to set MAC filter table.\n" );kfree (buf);
@@ -1137,7 +1129,7 @@ static int virtnet_vlan_rx_add_vid(strucsg_init_one (&sg, &vid,sizeof (vid));if (!virtnet_send_command (vi,VIRTIO_NET_CTRL_VLAN , -VIRTIO_NET_CTRL_VLAN_ADD , &sg,NULL )) +VIRTIO_NET_CTRL_VLAN_ADD , &sg))dev_warn (&dev->dev,"Failed to add VLAN ID %d.\n" , vid);return 0 ; }
@@ -1151,7 +1143,7 @@ static int virtnet_vlan_rx_kill_vid(strusg_init_one (&sg, &vid,sizeof (vid));if (!virtnet_send_command (vi,VIRTIO_NET_CTRL_VLAN , -VIRTIO_NET_CTRL_VLAN_DEL , &sg,NULL )) +VIRTIO_NET_CTRL_VLAN_DEL , &sg))dev_warn (&dev->dev,"Failed to kill VLAN ID %d.\n" , vid);return 0 ; }
Re: [PATCH net-next 2/3] virtio_net: remove unused parameter to send_command
Quoted 4 lines · Stephen Hemminger
All the code passes NULL for the last sg list (in). Simplify by just removing it.
Signed-off-by Stephen Hemminger <[email protected]>
When we need it we can re-add it.
Quoted 114 lines
drivers/net/virtio_net.c +13
-21@@ -876,13 +876,12 @@ static netdev_tx_t start_xmit(struct sk_* never fail unless improperly formated. */ static bool virtnet_send_command (struct virtnet_info *vi,u8 class,u8 cmd, -struct scatterlist *out, -struct scatterlist *in) +struct scatterlist *out) {struct scatterlist *sgs[4 ], hdr, stat;struct virtio_net_ctrl_hdr ctrl;virtio_net_ctrl_ack status = ~0 ; -unsigned out_num =0 , in_num =0 , tmp; +unsigned out_num =0 , tmp;/* Caller should know better */ BUG_ON (!virtio_has_feature (vi->vdev,VIRTIO_NET_F_CTRL_VQ ));@@ -895,16 +894,13 @@ static bool virtnet_send_command(structfor (; out; out =sg_next (out)) sgs[out_num++] = out; -if (in) - sgs[out_num + in_num++] = in;/* Add return status. */ sg_init_one (&stat, &status,sizeof (status)); - sgs[out_num + in_num++] = &stat; + sgs[out_num] = &stat; -BUG_ON (out_num + in_num >ARRAY_SIZE (sgs)); -BUG_ON (virtqueue_add_sgs (vi->cvq, sgs, out_num, in_num, vi,GFP_ATOMIC ) - <0 ); +BUG_ON (out_num +1 >ARRAY_SIZE (sgs)); +BUG_ON (virtqueue_add_sgs (vi->cvq, sgs, out_num,1 , vi,GFP_ATOMIC ) <0 );if (unlikely (!virtqueue_kick (vi->cvq)))return status ==VIRTIO_NET_OK ;@@ -934,8 +930,7 @@ static int virtnet_set_mac_address(strucif (virtio_has_feature (vdev,VIRTIO_NET_F_CTRL_MAC_ADDR )) {sg_init_one (&sg, addr->sa_data, dev->addr_len);if (!virtnet_send_command (vi,VIRTIO_NET_CTRL_MAC , -VIRTIO_NET_CTRL_MAC_ADDR_SET , - &sg,NULL )) { +VIRTIO_NET_CTRL_MAC_ADDR_SET , &sg)) {dev_warn (&vdev->dev,"Failed to set mac address by vq command.\n" );return -EINVAL ;@@ -1008,7 +1003,7 @@ static void virtnet_ack_link_announce(st {rtnl_lock ();if (!virtnet_send_command (vi,VIRTIO_NET_CTRL_ANNOUNCE , -VIRTIO_NET_CTRL_ANNOUNCE_ACK ,NULL ,NULL )) +VIRTIO_NET_CTRL_ANNOUNCE_ACK ,NULL ))dev_warn (&vi->dev->dev,"Failed to ack link announce.\n" );rtnl_unlock (); }@@ -1026,7 +1021,7 @@ static int virtnet_set_queues(struct virsg_init_one (&sg, &s,sizeof (s));if (!virtnet_send_command (vi,VIRTIO_NET_CTRL_MQ , -VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET , &sg,NULL )) { +VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET , &sg)) {dev_warn (&dev->dev,"Fail to set num of queue pairs to %d\n" , queue_pairs);return -EINVAL ;@@ -1076,16 +1071,14 @@ static void virtnet_set_rx_mode(struct nsg_init_one (sg, &promisc,sizeof (promisc));if (!virtnet_send_command (vi,VIRTIO_NET_CTRL_RX , -VIRTIO_NET_CTRL_RX_PROMISC , - sg,NULL )) +VIRTIO_NET_CTRL_RX_PROMISC , sg))dev_warn (&dev->dev,"Failed to %sable promisc mode.\n" , promisc ?"en" :"dis" );sg_init_one (sg, &allmulti,sizeof (allmulti));if (!virtnet_send_command (vi,VIRTIO_NET_CTRL_RX , -VIRTIO_NET_CTRL_RX_ALLMULTI , - sg,NULL )) +VIRTIO_NET_CTRL_RX_ALLMULTI , sg))dev_warn (&dev->dev,"Failed to %sable allmulti mode.\n" , allmulti ?"en" :"dis" );@@ -1121,8 +1114,7 @@ static void virtnet_set_rx_mode(struct n sizeof(mac_data->entries) + (mc_count * ETH_ALEN));if (!virtnet_send_command (vi,VIRTIO_NET_CTRL_MAC , -VIRTIO_NET_CTRL_MAC_TABLE_SET , - sg,NULL )) +VIRTIO_NET_CTRL_MAC_TABLE_SET , sg))dev_warn (&dev->dev,"Failed to set MAC filter table.\n" );kfree (buf);@@ -1137,7 +1129,7 @@ static int virtnet_vlan_rx_add_vid(strucsg_init_one (&sg, &vid,sizeof (vid));if (!virtnet_send_command (vi,VIRTIO_NET_CTRL_VLAN , -VIRTIO_NET_CTRL_VLAN_ADD , &sg,NULL )) +VIRTIO_NET_CTRL_VLAN_ADD , &sg))dev_warn (&dev->dev,"Failed to add VLAN ID %d.\n" , vid);return 0 ; }@@ -1151,7 +1143,7 @@ static int virtnet_vlan_rx_kill_vid(strusg_init_one (&sg, &vid,sizeof (vid));if (!virtnet_send_command (vi,VIRTIO_NET_CTRL_VLAN , -VIRTIO_NET_CTRL_VLAN_DEL , &sg,NULL )) +VIRTIO_NET_CTRL_VLAN_DEL , &sg))dev_warn (&dev->dev,"Failed to kill VLAN ID %d.\n" , vid);return 0 ; }
Re: [PATCH net-next 2/3] virtio_net: remove unused parameter to send_command
In reply to Stephen HemmingerFrom: Stephen Hemminger <[email protected]>
Date: Mon, 9 Dec 2013 16:17:40 -0800
Quoted 4 lines
All the code passes NULL for the last sg list (in). Simplify by just removing it.
Signed-off-by Stephen Hemminger <[email protected]>
Applied.
Re: [PATCH net-next 2/3] virtio_net: remove unused parameter to send_command
In reply to Stephen HemmingerFrom: Stephen Hemminger <[email protected]>
Date: Mon, 9 Dec 2013 16:17:40 -0800
Quoted 4 lines
All the code passes NULL for the last sg list (in). Simplify by just removing it.
Signed-off-by Stephen Hemminger <[email protected]>
Applied.
PATCH 3/3 virtio_net: spelling fixes
In reply to Stephen Hemmingerdrivers/net/virtio_net.c +2 -2
@@ -873,7 +873,7 @@ static netdev_tx_t start_xmit(struct sk_/* * Send command via the control virtqueue and check status. Commands * supported by the hypervisor, as indicated by feature bits, should -* never fail unless improperly formated. +* never fail unless improperly formatted. */ static bool virtnet_send_command (struct virtnet_info *vi,u8 class,u8 cmd,struct scatterlist *out)
@@ -1061,7 +1061,7 @@ static void virtnet_set_rx_mode(struct nvoid *buf;int i; -/* We can't dynamicaly set ndo_set_rx_mode, so return gracefully */ +/* We can't dynamically set ndo_set_rx_mode, so return gracefully */ if (!virtio_has_feature (vi->vdev,VIRTIO_NET_F_CTRL_RX ))return ;
Re: [PATCH net-next 3/3] virtio_net: spelling fixes
Quoted 4 lines · Stephen Hemminger
Signed-off-by Stephen Hemminger <[email protected]>
Quoted 20 lines
drivers/net/virtio_net.c +2
-2@@ -873,7 +873,7 @@ static netdev_tx_t start_xmit(struct sk_/* * Send command via the control virtqueue and check status. Commands * supported by the hypervisor, as indicated by feature bits, should -* never fail unless improperly formated. +* never fail unless improperly formatted. */ static bool virtnet_send_command (struct virtnet_info *vi,u8 class,u8 cmd,struct scatterlist *out)@@ -1061,7 +1061,7 @@ static void virtnet_set_rx_mode(struct nvoid *buf;int i; -/* We can't dynamicaly set ndo_set_rx_mode, so return gracefully */ +/* We can't dynamically set ndo_set_rx_mode, so return gracefully */ if (!virtio_has_feature (vi->vdev,VIRTIO_NET_F_CTRL_RX ))return ;
Re: [PATCH net-next 3/3] virtio_net: spelling fixes
In reply to Stephen HemmingerFrom: Stephen Hemminger <[email protected]>
Date: Mon, 9 Dec 2013 16:18:45 -0800
Quoted 1 line
Signed-off-by Stephen Hemminger <[email protected]>
Applied.
Quoted 4 lines · Stephen Hemminger
The
virtio_netdriver never sends the multicast address list to the host. This is because send command takes a pointer to scatter list to send but only inserts that one entry into the outgoing scatter list.
Quoted 8 lines
This bug has been there since:
commitf565a7c259d71cc186753653d978c646d2354b36Author: Alex Williamson <[email protected]> Date: Wed Feb 4 09:02:45 2009 +0000
virtio_net: Add a MAC filter tableSigned-off-by Stephen Hemminger <[email protected]>
Question is, can we detect a broken driver in the host somehow? If not we'll need a feature bit for hosts to actually do MC filtering.
Quoted 11 lines
drivers/net/virtio_net.c +1
-1@@ -893,7 +893,7 @@ static bool virtnet_send_command(structsg_init_one (&hdr, &ctrl,sizeof (ctrl)); sgs[out_num++] = &hdr; -if (out) +for (; out; out =sg_next (out)) sgs[out_num++] = out;if (in) sgs[out_num + in_num++] = in;
Michael S. Tsirkin
maintainerQuoted 12 lines · Michael S. Tsirkin
Quoted 11 lines · Stephen Hemminger
The
virtio_netdriver never sends the multicast address list to the host. This is because send command takes a pointer to scatter list to send but only inserts that one entry into the outgoing scatter list.This bug has been there since:
commitf565a7c259d71cc186753653d978c646d2354b36Author: Alex Williamson <[email protected]> Date: Wed Feb 4 09:02:45 2009 +0000
virtio_net: Add a MAC filter table
Quoted 7 lines
Quoted 1 line
Signed-off-by Stephen Hemminger <[email protected]>Question is, can we detect a broken driver in the host somehow? If not we'll need a feature bit for hosts to actually do MC filtering.
Hmm Vlad and Amos made some good points about this patch. Dave, pls don't apply yet until these are resolved.
Quoted 11 lines
Quoted 11 lines
drivers/net/virtio_net.c +1
-1@@ -893,7 +893,7 @@ static bool virtnet_send_command(structsg_init_one (&hdr, &ctrl,sizeof (ctrl)); sgs[out_num++] = &hdr; -if (out) +for (; out; out =sg_next (out)) sgs[out_num++] = out;if (in) sgs[out_num + in_num++] = in;
Quoted 16 lines · Stephen Hemminger
The
virtio_netdriver never sends the multicast address list to the host. This is because send command takes a pointer to scatter list to send but only inserts that one entry into the outgoing scatter list.This bug has been there since:
commitf565a7c259d71cc186753653d978c646d2354b36Author: Alex Williamson <[email protected]> Date: Wed Feb 4 09:02:45 2009 +0000
virtio_net: Add a MAC filter tableSigned-off-by Stephen Hemminger <[email protected]>
drivers/net/virtio_net.c static bool virtnet_send_command(struct · line 899
Quoted 8 lines
drivers/net/virtio_net.c +1
-1@@ -893,7 +893,7 @@ static bool virtnet_send_command(structsg_init_one (&hdr, &ctrl,sizeof (ctrl)); sgs[out_num++] = &hdr; -if (out) +for (; out; out =sg_next (out)) sgs[out_num++] = out;if (in) sgs[out_num + in_num++] = in;
Hi Stephen
Amos Kong pointed out in your original thread, that this doesn't seem to be needed and is working for him. I just checked my VMs and it's working for me as well without this. Have you seen it fail?
Amos did a very good job explaining, but it basically boils down to the fact that virtqueue_add_sgs() treats each entry of the sgs array as a list and walks each list using exactly the same code as this patch proposes :). virtqueue_add() also walks each array element as a list.
-vlad
Quoted 16 lines · Stephen Hemminger
The
virtio_netdriver never sends the multicast address list to the host. This is because send command takes a pointer to scatter list to send but only inserts that one entry into the outgoing scatter list.This bug has been there since:
commitf565a7c259d71cc186753653d978c646d2354b36Author: Alex Williamson <[email protected]> Date: Wed Feb 4 09:02:45 2009 +0000
virtio_net: Add a MAC filter tableSigned-off-by Stephen Hemminger <[email protected]>
drivers/net/virtio_net.c static bool virtnet_send_command(struct · line 899
Quoted 8 lines
drivers/net/virtio_net.c +1
-1@@ -893,7 +893,7 @@ static bool virtnet_send_command(structsg_init_one (&hdr, &ctrl,sizeof (ctrl)); sgs[out_num++] = &hdr; -if (out) +for (; out; out =sg_next (out)) sgs[out_num++] = out;if (in) sgs[out_num + in_num++] = in;
Hi Stephen
Amos Kong pointed out in your original thread, that this doesn't seem to be needed and is working for him. I just checked my VMs and it's working for me as well without this. Have you seen it fail?
Amos did a very good job explaining, but it basically boils down to the fact that virtqueue_add_sgs() treats each entry of the sgs array as a list and walks each list using exactly the same code as this patch proposes :). virtqueue_add() also walks each array element as a list.
-vlad
David Miller
maintainerFrom: Stephen Hemminger <[email protected]>
Date: Mon, 9 Dec 2013 16:16:32 -0800
Quoted 4 lines
The
virtio_netdriver never sends the multicast address list to the host. This is because send command takes a pointer to scatter list to send but only inserts that one entry into the outgoing scatter list.
Quoted 8 lines
This bug has been there since:
commitf565a7c259d71cc186753653d978c646d2354b36Author: Alex Williamson <[email protected]> Date: Wed Feb 4 09:02:45 2009 +0000
virtio_net: Add a MAC filter tableSigned-off-by Stephen Hemminger <[email protected]>
This seems to still be under discussion so I'll hold off on this one for now.
Thanks.
David Miller
maintainerFrom: Stephen Hemminger <[email protected]>
Date: Mon, 9 Dec 2013 16:16:32 -0800
Quoted 4 lines
The
virtio_netdriver never sends the multicast address list to the host. This is because send command takes a pointer to scatter list to send but only inserts that one entry into the outgoing scatter list.
Quoted 8 lines
This bug has been there since:
commitf565a7c259d71cc186753653d978c646d2354b36Author: Alex Williamson <[email protected]> Date: Wed Feb 4 09:02:45 2009 +0000
virtio_net: Add a MAC filter tableSigned-off-by Stephen Hemminger <[email protected]>
I'm just going to assume for now that you agree with the anaylsis of others that the sg lists are processed properly as-is, and therefore your patch isn't necessary.
Let me know if that is not the case.
Thanks.
David Miller
maintainerFrom: Stephen Hemminger <[email protected]>
Date: Mon, 9 Dec 2013 16:16:32 -0800
Quoted 4 lines
The
virtio_netdriver never sends the multicast address list to the host. This is because send command takes a pointer to scatter list to send but only inserts that one entry into the outgoing scatter list.
Quoted 8 lines
This bug has been there since:
commitf565a7c259d71cc186753653d978c646d2354b36Author: Alex Williamson <[email protected]> Date: Wed Feb 4 09:02:45 2009 +0000
virtio_net: Add a MAC filter tableSigned-off-by Stephen Hemminger <[email protected]>
I'm just going to assume for now that you agree with the anaylsis of others that the sg lists are processed properly as-is, and therefore your patch isn't necessary.
Let me know if that is not the case.
Thanks.