hw/arm: add initial support for Canon DIGIC SoC
v8 cover hw/arm: add initial support for Canon DIGIC SoC
[PATCH v8 1/6] hw/arm: add very initial support for Canon DIGIC SoC [PATCH v8 2/6] hw/arm/digic: prepare DIGIC-based boards support [PATCH v8 3/6] hw/arm/digic: add timer support
[PATCH v8 4/6] hw/arm/digic: add UART support
[PATCH v8 5/6] hw/arm/digic: add NOR ROM support
[PATCH v8 6/6] MAINTAINERS: Document 'Canon DIGIC' machine
Changes since v7:
1. change "fprintf(stderr," -> "error_report("
(thanks to Peter Crosthwaite)
2. fix digic_timer
* use ptimer in the periodic mode according to Peter Crosthwaite's recommendations;
* implement the 'control' and 'reload value' registers.
3. fix patches timestamp
Changes since v6:
1. rebase over Peter Crosthwaite's "Fix Support for ARM CBAR and reset-hivecs" v4 patch series
2. digic_boards: drop start_addr
so the line 's->digic->cpu.env.regs[15] = board->start_addr;' has gone
3. hw/arc/digic: use "reset-hivecs" ARM CPU property
4. add a record to the MAINTAINERS file
Changes since v5:
1. rebase over latest master
2. digic_timer: add a reset function
3. digic_timer: add a VMStateDescription
4. digic_timer: fix whitespaces
5. digic_boards: fix whitespaces
6. move misplaced DIGIC_ROM* definitions
to the "hw/arm/digic: add NOR ROM support" patch
Changes since v4:
1. digic.h: parent_obj: change type Object -> DeviceState
2. digic-uart: drop reg array
3. digic_boards: fix K8P3215UQB comment
4. Makefile: place digic stuff in own line
5. drop cpu-qom.h inclusion
6. digic.h: add private/public labels
7. digic.h: fix guard macro
8. move base address macros to digic.c
9. fix header comments
Changes since v3:
1. fix typos and formatting
2. digic-timer: drop DPRINTF
3. digic-timer: fix DIGIC4_TIMER_BASE() macro
4. digic.c: fix max timer device string
Changes since v2:
1. rebase over latest master;
* pass available size to object_initialize().
2. digic-uart: qemu_log: use LOG_UNIMP instead LOG_GUEST_ERROR;
3. digic-boards: update rom image load code: introduce digic_load_rom().
Changes since v1:
0. drop the "add ARM946E-S CPU" patch;
1. convert to QOM, split DIGIC SoC code and board code
(thanks to Andreas Fa:rber, Peter Maydell and Peter Crosthwaite);
2. fix digic-uart (many thanks to Peter Crosthwaite
for his comments); 3. digic-boards: digic4_add_k8p3215uqb_rom(): update rom image load code: use the '-bios' option.
DIGIC is Canon Inc.'s name for a family of SoC
for digital cameras and camcorders.
See http://en.wikipedia.org/wiki/DIGIC for details.
There is no publicly available specification for DIGIC chips. All information about DIGIC chip internals is based on reverse engineering efforts made by CHDK (http://chdk.wikia.com) and Magic Lantern (http://www.magiclantern.fm) projects contributors.
Also this patch series adds initial support for Canon PowerShot A1100 IS compact camera (it is my only camera with connected UART interface). As the DIGIC-based cameras differences mostly are insignificant (e.g. RAM-size, ROM type and size, GPIO usage) the other compact and DSLR cameras support can be easily added.
This DIGIC support patch series is inspired
by EOS QEMU from Magic Lantern project.
The main differences:
* EOS QEMU uses home-brew all-in-one monolith design; this patch series uses conventional QEMU object-centric design;
* EOS QEMU tries provide simplest emulation for most controllers inside SoC to run Magic Lantern firmware; this patch series provide more complete support
only for core devices to run barebox bootloader.
** EOS QEMU does not support timer counting
(this patch series emulate 1 MHz counting);
** EOS QEMU support DIGIC UART only for output character to stderr; (this patch series emulate introduces full blown UART interface);
** EOS QEMU has incomplete ROM support;
(this patch series uses conventional QEMU pflash).
This initial DIGIC support can't be used to run the original camera firmware, but it can successfully run experimental version of barebox bootloader (see http://www.barebox.org).
The last sources of barebox for PowerShot A1100 can be obtained here:
https://github.com/frantony/barebox/tree/next.digic.20131213
The precompiled ROM image usable with QEMU can be obtained here:
https://github.com/frantony/barebox/raw/next.digic.20131213/canon-a1100-rom1.bin
Download this ROM image and just run QEMU:
qemu-system-arm -M canon-a1100 -serial stdio
Short build instruction for QEMU bios image (canon-a1100-rom1.bin):
$ git clone https://github.com/frantony/barebox -b next.digic.20131213 $ cd barebox $ export ARCH=arm $ export CROSS_COMPILE=<your ARM cross-compiler prefix> $ make canon-a1100_defconfig $ make $ ./mk-canon-a1100-rom1.sh
This ROM image (after "dancing bit" encoding) can be run on real Canon A1100 camera.
The short build instruction for __previous__ DIGIC barebox version (it can be used with more recent sources too) can be obtained here:
http://lists.infradead.org/pipermail/barebox/2013-August/016007.html
PATCH v8 1/6 hw/arm: add very initial support for Canon DIGIC SoC
DIGIC is Canon Inc.'s name for a family of SoC for digital cameras and camcorders.
There is no publicly available specification for DIGIC chips. All information about DIGIC chip internals is based on reverse engineering efforts made by CHDK (http://chdk.wikia.com) and Magic Lantern (http://www.magiclantern.fm) projects contributors.
--- default-configs/arm-softmmu.mak | 1 + hw/arm/Makefile.objs | 1 + hw/arm/digic.c | 71 +++++++++++++++++++++++++++++++++++++++++ include/hw/arm/digic.h | 35 ++++++++++++++++++++ 4 files changed, 108 insertions(+) create mode 100644 hw/arm/digic.c create mode 100644 include/hw/arm/digic.h
default-configs/arm-softmmu.mak +1 -0
@@ -64,6 +64,7 @@ CONFIG_XILINX_SPIPS=y CONFIG_ARM11SCU=y CONFIG_A9SCU=y +CONFIG_DIGIC=y CONFIG_MARVELL_88W8618=y CONFIG_OMAP=y CONFIG_TSC210X=y
hw/arm/Makefile.objs +1 -0
@@ -4,4 +4,5 @@ obj-y += omap_sx1.o palm.o realview.o spitz.o stellaris.o obj-y += tosa.o versatilepb.o vexpress.o virt.o xilinx_zynq.o z2.o obj-y += armv7m.o exynos4210.o pxa2xx.o pxa2xx_gpio.o pxa2xx_pic.o +obj-$(CONFIG_DIGIC) += digic.o obj-y += omap1.o omap2.o strongarm.o
hw/arm/digic.c new file +71 -0
71 lines not on this page · raw message
include/hw/arm/digic.h new file +35 -0
@@ -0,0 +1,35 @@ +/* +* Misc Canon DIGIC declarations. +* +* Copyright (C) 2013 Antony Pavlov <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +*/ + +#ifndef HW_ARM_DIGIC_H +#define HW_ARM_DIGIC_H + +#include "cpu.h" + +#define TYPE_DIGIC "digic" + +#define DIGIC (obj) OBJECT_CHECK(DigicState, (obj), TYPE_DIGIC) + +typedef struct DigicState { +/*< private >*/ +DeviceState parent_obj; +/*< public >*/ + +ARMCPU cpu; +}DigicState ; + +#endif /* HW_ARM_DIGIC_H */
Signature · 1 line
1.8.5
PATCH v8 2/6 hw/arm/digic: prepare DIGIC-based boards support
In reply to Antony PavlovAlso this patch adds initial support for Canon
PowerShot A1100 IS compact camera.
--- hw/arm/Makefile.objs | 1 + hw/arm/digic_boards.c | 84 +++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 85 insertions(+) create mode 100644 hw/arm/digic_boards.c
hw/arm/Makefile.objs +1 -0
@@ -1,4 +1,5 @@ obj-y += boot.o collie.o exynos4_boards.o gumstix.o highbank.o +obj-$(CONFIG_DIGIC) += digic_boards.o obj-y += integratorcp.o kzm.o mainstone.o musicpal.o nseries.o obj-y += omap_sx1.o palm.o realview.o spitz.o stellaris.o obj-y += tosa.o versatilepb.o vexpress.o virt.o xilinx_zynq.o z2.o
hw/arm/digic_boards.c new file +84 -0
84 lines not on this page · raw message
Signature · 1 line
1.8.5
Re: [Qemu-devel] [PATCH v8 2/6] hw/arm/digic: prepare DIGIC-based boards support
Hi,
Am 13.12.2013 22:42, schrieb Antony Pavlov:
Quoted 9 lines
Also this patch adds initial support for Canon
PowerShot A1100 IS compact camera.Signed-off-by Antony Pavlov <[email protected]>--- hw/arm/Makefile.objs | 1 + hw/arm/digic_boards.c | 84 +++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 85 insertions(+) create mode 100644 hw/arm/digic_boards.c
This patch is lacking a one-line addition to tests/qom-test.c to have this new board actually covered by make check. Please add it here if you respin or post a separate patch as follow-up.
PMM/PC: May apply to other recent series as well, please keep eyes open!
Regards,
Andreas
P.S. It would've been helpful to include a diffstat in the cover letter as is done by default for --cover-letter.
Signature · 2 lines
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
Re: [Qemu-devel] [PATCH v8 2/6] hw/arm/digic: prepare DIGIC-based boards support
Quoted 13 lines · On Mon, 16 Dec 2013 00:04:18 +0100 Andreas Färber <[email protected]> wrote:
Hi,
Am 13.12.2013 22:42, schrieb Antony Pavlov:
Quoted 9 lines
Also this patch adds initial support for Canon
PowerShot A1100 IS compact camera.Signed-off-by Antony Pavlov <[email protected]>--- hw/arm/Makefile.objs | 1 + hw/arm/digic_boards.c | 84 +++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 85 insertions(+) create mode 100644 hw/arm/digic_boards.c
Quoted 3 lines
This patch is lacking a one-line addition to
tests/qom-test.cto have this new board actually covered bymake check. Please add it here if you respin or post a separate patch as follow-up.
Do you mean this?
tests/qom-test.c +1 -0
@@ -70,6 +70,7 @@ static const char *arm_machines[] = {"xilinx-zynq-a9" ,"highbank" ,"midway" , + "canon-a1100", };
Quoted 11 lines
PMM/PC: May apply to other recent series as well, please keep eyes open!
Regards,
Andreas
P.S. It would've been helpful to include a diffstat in the cover letter as is done by default for --cover-letter.Signature · 2 lines
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
Signature · 3 lines
-- Best regards, Antony Pavlov
PATCH v8 3/6 hw/arm/digic: add timer support
In reply to Antony Pavlov--- hw/arm/digic.c | 28 +++++++++ hw/timer/Makefile.objs | 1 + hw/timer/digic-timer.c | 168 +++++++++++++++++++++++++++++++++++++++++++++++++ hw/timer/digic-timer.h | 38 +++++++++++ include/hw/arm/digic.h | 6 ++ 5 files changed, 241 insertions(+) create mode 100644 hw/timer/digic-timer.c create mode 100644 hw/timer/digic-timer.h
hw/arm/digic.c +28 -0
@@ -22,18 +22,35 @@#include "hw/arm/digic.h" +#define DIGIC4_TIMER_BASE (n) (0xc0210000 + (n) * 0x100) +static void digic_init (Object *obj) {DigicState *s =DIGIC (obj); +DeviceState *dev; +int i;object_initialize (&s->cpu,sizeof (s->cpu),"arm946-" TYPE_ARM_CPU );object_property_add_child (obj,"cpu" ,OBJECT (&s->cpu),NULL ); + +for (i =0 ; i <DIGIC4_NB_TIMERS ; i++) { +#define DIGIC_TIMER_NAME_MLEN 11 +char name[DIGIC_TIMER_NAME_MLEN ]; + +object_initialize (&s->timer[i],sizeof (s->timer[i]),TYPE_DIGIC_TIMER ); + dev =DEVICE (&s->timer[i]); +qdev_set_parent_bus (dev,sysbus_get_default ()); +snprintf (name,DIGIC_TIMER_NAME_MLEN ,"timer[%d]" , i); +object_property_add_child (obj, name,OBJECT (&s->timer[i]),NULL ); + } }static void digic_realize (DeviceState *dev,Error **errp) {DigicState *s =DIGIC (dev);Error *err =NULL ; +SysBusDevice *sbd; +int i;object_property_set_bool (OBJECT (&s->cpu), true,"reset-hivecs" , &err);if (err !=NULL ) {
@@ -46,6 +63,17 @@ static void digic_realize(DeviceState *dev, Error **errp)error_propagate (errp, err);return ; } + +for (i =0 ; i <DIGIC4_NB_TIMERS ; i++) { +object_property_set_bool (OBJECT (&s->timer[i]), true,"realized" , &err); +if (err !=NULL ) { +error_propagate (errp, err); +return ; + } + + sbd =SYS_BUS_DEVICE (&s->timer[i]); +sysbus_mmio_map (sbd,0 ,DIGIC4_TIMER_BASE (i)); + } }static void digic_class_init (ObjectClass *oc,void *data)
hw/timer/Makefile.objs +1 -0
@@ -26,5 +26,6 @@ obj-$(CONFIG_OMAP) += omap_synctimer.o obj-$(CONFIG_PXA2XX) += pxa2xx_timer.o obj-$(CONFIG_SH4) += sh_timer.o obj-$(CONFIG_TUSB6010) += tusb6010.o +obj-$(CONFIG_DIGIC) += digic-timer.o obj-$(CONFIG_MC146818RTC) += mc146818rtc.o
hw/timer/digic-timer.c new file +168 -0
168 lines not on this page · raw message
hw/timer/digic-timer.h new file +38 -0
@@ -0,0 +1,38 @@ +/* +* Canon DIGIC timer block declarations. +* +* Copyright (C) 2013 Antony Pavlov <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +*/ + +#ifndef HW_TIMER_DIGIC_TIMER_H +#define HW_TIMER_DIGIC_TIMER_H + +#include "hw/sysbus.h" +#include "qemu/typedefs.h" +#include "hw/ptimer.h" + +#define TYPE_DIGIC_TIMER "digic-timer" +#define DIGIC_TIMER (obj) OBJECT_CHECK(DigicTimerState, (obj), TYPE_DIGIC_TIMER) + +typedef struct DigicTimerState { +SysBusDevice parent_obj; + +MemoryRegion iomem; +ptimer_state *ptimer; + +uint32_t control; +uint32_t relvalue; +}DigicTimerState ; + +#endif /* HW_TIMER_DIGIC_TIMER_H */
include/hw/arm/digic.h +6 -0
@@ -20,16 +20,22 @@#include "cpu.h" +#include "hw/timer/digic-timer.h" +#define TYPE_DIGIC "digic"#define DIGIC (obj) OBJECT_CHECK(DigicState, (obj), TYPE_DIGIC) +#define DIGIC4_NB_TIMERS 3 +typedef struct DigicState {/*< private >*/ DeviceState parent_obj;/*< public >*/ ARMCPU cpu; + +DigicTimerState timer[DIGIC4_NB_TIMERS ]; }DigicState ;#endif /* HW_ARM_DIGIC_H */
Signature · 1 line
1.8.5
Re: [Qemu-devel] [PATCH v8 3/6] hw/arm/digic: add timer support
Quoted 116 lines · Antony Pavlov
Signed-off-by Antony Pavlov <[email protected]>--- hw/arm/digic.c | 28 +++++++++ hw/timer/Makefile.objs | 1 + hw/timer/digic-timer.c | 168 +++++++++++++++++++++++++++++++++++++++++++++++++ hw/timer/digic-timer.h | 38 +++++++++++ include/hw/arm/digic.h | 6 ++ 5 files changed, 241 insertions(+) create mode 100644 hw/timer/digic-timer.c create mode 100644 hw/timer/digic-timer.hhw/arm/digic.c +28
-0@@ -22,18 +22,35 @@#include "hw/arm/digic.h" +#define DIGIC4_TIMER_BASE (n) (0xc0210000 + (n) * 0x100) +static void digic_init (Object *obj) {DigicState *s =DIGIC (obj); +DeviceState *dev; +int i;object_initialize (&s->cpu,sizeof (s->cpu),"arm946-" TYPE_ARM_CPU );object_property_add_child (obj,"cpu" ,OBJECT (&s->cpu),NULL ); + +for (i =0 ; i <DIGIC4_NB_TIMERS ; i++) { +#define DIGIC_TIMER_NAME_MLEN 11 +char name[DIGIC_TIMER_NAME_MLEN ]; + +object_initialize (&s->timer[i],sizeof (s->timer[i]),TYPE_DIGIC_TIMER ); + dev =DEVICE (&s->timer[i]); +qdev_set_parent_bus (dev,sysbus_get_default ()); +snprintf (name,DIGIC_TIMER_NAME_MLEN ,"timer[%d]" , i); +object_property_add_child (obj, name,OBJECT (&s->timer[i]),NULL ); + } }static void digic_realize (DeviceState *dev,Error **errp) {DigicState *s =DIGIC (dev);Error *err =NULL ; +SysBusDevice *sbd; +int i;object_property_set_bool (OBJECT (&s->cpu), true,"reset-hivecs" , &err);if (err !=NULL ) {@@ -46,6 +63,17 @@ static void digic_realize(DeviceState *dev, Error **errp)error_propagate (errp, err);return ; } + +for (i =0 ; i <DIGIC4_NB_TIMERS ; i++) { +object_property_set_bool (OBJECT (&s->timer[i]), true,"realized" , &err); +if (err !=NULL ) { +error_propagate (errp, err); +return ; + } + + sbd =SYS_BUS_DEVICE (&s->timer[i]); +sysbus_mmio_map (sbd,0 ,DIGIC4_TIMER_BASE (i)); + } }static void digic_class_init (ObjectClass *oc,void *data)hw/timer/Makefile.objs +1
-0@@ -26,5 +26,6 @@ obj-$(CONFIG_OMAP) += omap_synctimer.o obj-$(CONFIG_PXA2XX) += pxa2xx_timer.o obj-$(CONFIG_SH4) += sh_timer.o obj-$(CONFIG_TUSB6010) += tusb6010.o +obj-$(CONFIG_DIGIC) += digic-timer.o obj-$(CONFIG_MC146818RTC) += mc146818rtc.ohw/timer/digic-timer.c new file +30
-0@@ -0,0 +1,168 @@ +/* +* QEMU model of the Canon DIGIC timer block. +* +* Copyright (C) 2013 Antony Pavlov <[email protected]> +* +* This model is based on reverse engineering efforts +* made by CHDK (http://chdk.wikia.com) and +* Magic Lantern (http://www.magiclantern.fm) projects +* contributors. +* +* See "Timer/Clock Module" docs here: +* http://magiclantern.wikia.com/wiki/Register_Map +* +* The QEMU model of the OSTimer in PKUnity SoC by Guan Xuetao +* is used as a template. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +*/ + +#include "hw/sysbus.h" +#include "hw/ptimer.h"
hw/timer/digic-timer.c line 40
Quoted 10 lines
hw/timer/digic-timer.c new file +10
-0+#include "qemu/main-loop.h" + +#include "hw/timer/digic-timer.h" + +#define DIGIC_TIMER_CONTROL 0x00 +#define DIGIC_TIMER_CONTROL_RST 0x80000000 +#define DIGIC_TIMER_CONTROL_EN 0x00000001 +#define DIGIC_TIMER_RELVALUE 0x08 +#define DIGIC_TIMER_VALUE 0x0c +
Programmer model #defines should go in the timer/digic-timer.h header to allow for easy generation of test stimulus - other code can exercise your device using your already written full macro suite.
Quoted 51 lines
hw/timer/digic-timer.c new file +51
-0+static const VMStateDescription vmstate_digic_timer = { + .name ="digic.timer" , + .version_id =1 , + .minimum_version_id =1 , + .minimum_version_id_old =1 , + .fields = (VMStateField []) { +VMSTATE_PTIMER (ptimer, DigicTimerState), +VMSTATE_UINT32 (control, DigicTimerState), +VMSTATE_UINT32 (relvalue, DigicTimerState), +VMSTATE_END_OF_LIST () + } +}; + +static void digic_timer_reset (DeviceState *dev) +{ +DigicTimerState *s =DIGIC_TIMER (dev); + +ptimer_stop (s->ptimer); + s->control =0 ; + s->relvalue =0 ; +} + +static uint64_t digic_timer_read (void *opaque,hwaddr offset,unsigned size) +{ +DigicTimerState *s = opaque; +uint64_t ret =0 ; + +switch (offset) { +case DIGIC_TIMER_CONTROL : + ret = s->control; +break ; +case DIGIC_TIMER_RELVALUE : + ret = s->relvalue; +break ; +case DIGIC_TIMER_VALUE : + ret =ptimer_get_count (s->ptimer) &0xffff ; +break ; +default : +qemu_log_mask (LOG_UNIMP , +"digic-timer: read access to unknown register 0x" + TARGET_FMT_plx, offset); + } + +return ret; +} + +static void digic_timer_write (void *opaque,hwaddr offset, +uint64_t value,unsigned size) +{ +DigicTimerState *s = opaque; +
hw/timer/digic-timer.c line 101
Quoted 10 lines
hw/timer/digic-timer.c new file +10
-0+switch (offset) { +case DIGIC_TIMER_CONTROL : +if (value &DIGIC_TIMER_CONTROL_RST ) { +digic_timer_reset ((DeviceState *)s); +break ; + } + +if (value &DIGIC_TIMER_CONTROL_EN ) { +ptimer_run (s->ptimer,0 ); + }
So is there definately no stop function on de-assertion of this bit? I couldnt find it in your documentation but it seem quite natural to me that,
} else {
ptimer_stop(s->ptimer);
}Would probably be the implementation of an enable bit, rather than the only way to stop the timer being soft reset. I wont block on it however.
hw/timer/digic-timer.c line 107
Quoted 6 lines
hw/timer/digic-timer.c new file +6
-0+ + s->control = (uint32_t )value; +break ; + +case DIGIC_TIMER_RELVALUE : + s->relvalue = (uint32_t )(value &0xffff );
extract32 is preferable over & >> logic.
Quoted 33 lines
hw/timer/digic-timer.c new file +33
-0+ptimer_set_limit (s->ptimer, s->relvalue,1 ); +break ; + +case DIGIC_TIMER_VALUE : +break ; + +default : +qemu_log_mask (LOG_UNIMP , +"digic-timer: read access to unknown register 0x" + TARGET_FMT_plx, offset); + } +} + +static const MemoryRegionOps digic_timer_ops = { + .read = digic_timer_read, + .write = digic_timer_write, + .impl = { + .min_access_size =4 , + .max_access_size =4 , + }, + .endianness =DEVICE_NATIVE_ENDIAN , +}; + +static void digic_timer_init (Object *obj) +{ +DigicTimerState *s =DIGIC_TIMER (obj); + + s->ptimer =ptimer_init (NULL ); + +/* +* FIXME: there is no documentation on Digic timer +* frequency setup so let it always run at 1 MHz +*/
hw/timer/digic-timer.c line 150
Quoted 10 lines
hw/timer/digic-timer.c new file +10
-0+ptimer_set_freq (s->ptimer,1 *1000 *1000 ); + +memory_region_init_io (&s->iomem,OBJECT (s), &digic_timer_ops, s, +TYPE_DIGIC_TIMER ,0x100 ); +sysbus_init_mmio (SYS_BUS_DEVICE (obj), &s->iomem); +} + +static void digic_timer_class_init (ObjectClass *klass,void *class_data) +{ +DeviceClass *dc =DEVICE_CLASS (klass);
Add a blank line here.
Quoted 42 lines
hw/timer/digic-timer.c new file +18
-0+ dc->reset = digic_timer_reset; + dc->vmsd = &vmstate_digic_timer; +} + +static const TypeInfo digic_timer_info = { + .name =TYPE_DIGIC_TIMER , + .parent =TYPE_SYS_BUS_DEVICE , + .instance_size =sizeof (DigicTimerState), + .instance_init = digic_timer_init, + .class_init = digic_timer_class_init, +}; + +static void digic_timer_register_type (void ) +{ +type_register_static (&digic_timer_info); +} + +type_init (digic_timer_register_type)hw/timer/digic-timer.h new file +18
-0@@ -0,0 +1,38 @@ +/* +* Canon DIGIC timer block declarations. +* +* Copyright (C) 2013 Antony Pavlov <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +*/ + +#ifndef HW_TIMER_DIGIC_TIMER_H
hw/timer/digic-timer.h line 28
Quoted 10 lines
hw/timer/digic-timer.h new file +10
-0+#define HW_TIMER_DIGIC_TIMER_H + +#include "hw/sysbus.h" +#include "qemu/typedefs.h" +#include "hw/ptimer.h" + +#define TYPE_DIGIC_TIMER "digic-timer" +#define DIGIC_TIMER (obj) OBJECT_CHECK(DigicTimerState, (obj), TYPE_DIGIC_TIMER) + +typedef struct DigicTimerState {
/*< private >*/
hw/timer/digic-timer.h line 29
Quoted 1 line
hw/timer/digic-timer.h new file +1
-0+SysBusDevice parent_obj;
/*< public >*/
This is all trivial stuff. So if you make the changes (with the stop-on-no-en being optional),
Quoted 40 lines
hw/timer/digic-timer.h new file +9
-0+ +MemoryRegion iomem; +ptimer_state *ptimer; + +uint32_t control; + uint32_t relvalue; +} DigicTimerState; + +#endif /* HW_TIMER_DIGIC_TIMER_H */ include/hw/arm/digic.h +6
-1@@ -20,16 +20,22 @@#include "cpu.h" +#include "hw/timer/digic-timer.h" +#define TYPE_DIGIC "digic"#define DIGIC (obj) OBJECT_CHECK(DigicState, (obj), TYPE_DIGIC) +#define DIGIC4_NB_TIMERS 3 +typedef struct DigicState {/*< private >*/ DeviceState parent_obj;/*< public >*/ ARMCPU cpu; + +DigicTimerState timer[DIGIC4_NB_TIMERS ]; }DigicState ;#endif /* HW_ARM_DIGIC_H */ --1.8.5
Re: [Qemu-devel] [PATCH v8 3/6] hw/arm/digic: add timer support
Quoted 316 lines · On Sat, 14 Dec 2013 16:41:44 +1000 Peter Crosthwaite…
Quoted 116 lines · Antony Pavlov
Signed-off-by Antony Pavlov <[email protected]>--- hw/arm/digic.c | 28 +++++++++ hw/timer/Makefile.objs | 1 + hw/timer/digic-timer.c | 168 +++++++++++++++++++++++++++++++++++++++++++++++++ hw/timer/digic-timer.h | 38 +++++++++++ include/hw/arm/digic.h | 6 ++ 5 files changed, 241 insertions(+) create mode 100644 hw/timer/digic-timer.c create mode 100644 hw/timer/digic-timer.hhw/arm/digic.c +28
-0@@ -22,18 +22,35 @@#include "hw/arm/digic.h" +#define DIGIC4_TIMER_BASE (n) (0xc0210000 + (n) * 0x100) +static void digic_init (Object *obj) {DigicState *s =DIGIC (obj); +DeviceState *dev; +int i;object_initialize (&s->cpu,sizeof (s->cpu),"arm946-" TYPE_ARM_CPU );object_property_add_child (obj,"cpu" ,OBJECT (&s->cpu),NULL ); + +for (i =0 ; i <DIGIC4_NB_TIMERS ; i++) { +#define DIGIC_TIMER_NAME_MLEN 11 +char name[DIGIC_TIMER_NAME_MLEN ]; + +object_initialize (&s->timer[i],sizeof (s->timer[i]),TYPE_DIGIC_TIMER ); + dev =DEVICE (&s->timer[i]); +qdev_set_parent_bus (dev,sysbus_get_default ()); +snprintf (name,DIGIC_TIMER_NAME_MLEN ,"timer[%d]" , i); +object_property_add_child (obj, name,OBJECT (&s->timer[i]),NULL ); + } }static void digic_realize (DeviceState *dev,Error **errp) {DigicState *s =DIGIC (dev);Error *err =NULL ; +SysBusDevice *sbd; +int i;object_property_set_bool (OBJECT (&s->cpu), true,"reset-hivecs" , &err);if (err !=NULL ) {@@ -46,6 +63,17 @@ static void digic_realize(DeviceState *dev, Error **errp)error_propagate (errp, err);return ; } + +for (i =0 ; i <DIGIC4_NB_TIMERS ; i++) { +object_property_set_bool (OBJECT (&s->timer[i]), true,"realized" , &err); +if (err !=NULL ) { +error_propagate (errp, err); +return ; + } + + sbd =SYS_BUS_DEVICE (&s->timer[i]); +sysbus_mmio_map (sbd,0 ,DIGIC4_TIMER_BASE (i)); + } }static void digic_class_init (ObjectClass *oc,void *data)hw/timer/Makefile.objs +1
-0@@ -26,5 +26,6 @@ obj-$(CONFIG_OMAP) += omap_synctimer.o obj-$(CONFIG_PXA2XX) += pxa2xx_timer.o obj-$(CONFIG_SH4) += sh_timer.o obj-$(CONFIG_TUSB6010) += tusb6010.o +obj-$(CONFIG_DIGIC) += digic-timer.o obj-$(CONFIG_MC146818RTC) += mc146818rtc.ohw/timer/digic-timer.c new file +30
-0@@ -0,0 +1,168 @@ +/* +* QEMU model of the Canon DIGIC timer block. +* +* Copyright (C) 2013 Antony Pavlov <[email protected]> +* +* This model is based on reverse engineering efforts +* made by CHDK (http://chdk.wikia.com) and +* Magic Lantern (http://www.magiclantern.fm) projects +* contributors. +* +* See "Timer/Clock Module" docs here: +* http://magiclantern.wikia.com/wiki/Register_Map +* +* The QEMU model of the OSTimer in PKUnity SoC by Guan Xuetao +* is used as a template. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +*/ + +#include "hw/sysbus.h" +#include "hw/ptimer.h" hw/timer/digic-timer.c line 40
Quoted 10 lines
hw/timer/digic-timer.c new file +10
-0+#include "qemu/main-loop.h" + +#include "hw/timer/digic-timer.h" + +#define DIGIC_TIMER_CONTROL 0x00 +#define DIGIC_TIMER_CONTROL_RST 0x80000000 +#define DIGIC_TIMER_CONTROL_EN 0x00000001 +#define DIGIC_TIMER_RELVALUE 0x08 +#define DIGIC_TIMER_VALUE 0x0c +Programmer model #defines should go in the
timer/digic-timer.hheader to allow for easy generation of test stimulus - other code can exercise your device using your already written full macro suite.Quoted 51 lines
hw/timer/digic-timer.c new file +51
-0+static const VMStateDescription vmstate_digic_timer = { + .name ="digic.timer" , + .version_id =1 , + .minimum_version_id =1 , + .minimum_version_id_old =1 , + .fields = (VMStateField []) { +VMSTATE_PTIMER (ptimer, DigicTimerState), +VMSTATE_UINT32 (control, DigicTimerState), +VMSTATE_UINT32 (relvalue, DigicTimerState), +VMSTATE_END_OF_LIST () + } +}; + +static void digic_timer_reset (DeviceState *dev) +{ +DigicTimerState *s =DIGIC_TIMER (dev); + +ptimer_stop (s->ptimer); + s->control =0 ; + s->relvalue =0 ; +} + +static uint64_t digic_timer_read (void *opaque,hwaddr offset,unsigned size) +{ +DigicTimerState *s = opaque; +uint64_t ret =0 ; + +switch (offset) { +case DIGIC_TIMER_CONTROL : + ret = s->control; +break ; +case DIGIC_TIMER_RELVALUE : + ret = s->relvalue; +break ; +case DIGIC_TIMER_VALUE : + ret =ptimer_get_count (s->ptimer) &0xffff ; +break ; +default : +qemu_log_mask (LOG_UNIMP , +"digic-timer: read access to unknown register 0x" + TARGET_FMT_plx, offset); + } + +return ret; +} + +static void digic_timer_write (void *opaque,hwaddr offset, +uint64_t value,unsigned size) +{ +DigicTimerState *s = opaque; +hw/timer/digic-timer.c line 101
Quoted 10 lines
hw/timer/digic-timer.c new file +10
-0+switch (offset) { +case DIGIC_TIMER_CONTROL : +if (value &DIGIC_TIMER_CONTROL_RST ) { +digic_timer_reset ((DeviceState *)s); +break ; + } + +if (value &DIGIC_TIMER_CONTROL_EN ) { +ptimer_run (s->ptimer,0 ); + }So is there definately no stop function on de-assertion of this bit? I couldnt find it in your documentation but it seem quite natural to me that,
} else { ptimer_stop(s->ptimer); }Would probably be the implementation of an enable bit, rather than the only way to stop the timer being soft reset. I wont block on it however.
hw/timer/digic-timer.c line 107
Quoted 6 lines
hw/timer/digic-timer.c new file +6
-0+ + s->control = (uint32_t )value; +break ; + +case DIGIC_TIMER_RELVALUE : + s->relvalue = (uint32_t )(value &0xffff );extract32 is preferable over & >> logic.
Quoted 33 lines
hw/timer/digic-timer.c new file +33
-0+ptimer_set_limit (s->ptimer, s->relvalue,1 ); +break ; + +case DIGIC_TIMER_VALUE : +break ; + +default : +qemu_log_mask (LOG_UNIMP , +"digic-timer: read access to unknown register 0x" + TARGET_FMT_plx, offset); + } +} + +static const MemoryRegionOps digic_timer_ops = { + .read = digic_timer_read, + .write = digic_timer_write, + .impl = { + .min_access_size =4 , + .max_access_size =4 , + }, + .endianness =DEVICE_NATIVE_ENDIAN , +}; + +static void digic_timer_init (Object *obj) +{ +DigicTimerState *s =DIGIC_TIMER (obj); + + s->ptimer =ptimer_init (NULL ); + +/* +* FIXME: there is no documentation on Digic timer +* frequency setup so let it always run at 1 MHz +*/ hw/timer/digic-timer.c line 150
Quoted 10 lines
hw/timer/digic-timer.c new file +10
-0+ptimer_set_freq (s->ptimer,1 *1000 *1000 ); + +memory_region_init_io (&s->iomem,OBJECT (s), &digic_timer_ops, s, +TYPE_DIGIC_TIMER ,0x100 ); +sysbus_init_mmio (SYS_BUS_DEVICE (obj), &s->iomem); +} + +static void digic_timer_class_init (ObjectClass *klass,void *class_data) +{ +DeviceClass *dc =DEVICE_CLASS (klass);Add a blank line here.
Quoted 42 lines
hw/timer/digic-timer.c new file +18
-0+ dc->reset = digic_timer_reset; + dc->vmsd = &vmstate_digic_timer; +} + +static const TypeInfo digic_timer_info = { + .name =TYPE_DIGIC_TIMER , + .parent =TYPE_SYS_BUS_DEVICE , + .instance_size =sizeof (DigicTimerState), + .instance_init = digic_timer_init, + .class_init = digic_timer_class_init, +}; + +static void digic_timer_register_type (void ) +{ +type_register_static (&digic_timer_info); +} + +type_init (digic_timer_register_type)hw/timer/digic-timer.h new file +18
-0@@ -0,0 +1,38 @@ +/* +* Canon DIGIC timer block declarations. +* +* Copyright (C) 2013 Antony Pavlov <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +*/ + +#ifndef HW_TIMER_DIGIC_TIMER_H hw/timer/digic-timer.h line 28
Quoted 10 lines
hw/timer/digic-timer.h new file +10
-0+#define HW_TIMER_DIGIC_TIMER_H + +#include "hw/sysbus.h" +#include "qemu/typedefs.h" +#include "hw/ptimer.h" + +#define TYPE_DIGIC_TIMER "digic-timer" +#define DIGIC_TIMER (obj) OBJECT_CHECK(DigicTimerState, (obj), TYPE_DIGIC_TIMER) + +typedef struct DigicTimerState {/*< private >*/
Quoted 8 lines
hw/timer/digic-timer.h line 29
Quoted 1 line
hw/timer/digic-timer.h new file +1
-0+SysBusDevice parent_obj;/*< public >*/
This is all trivial stuff. So if you make the changes (with the stop-on-no-en being optional),
Reviewed-by Peter Crosthwaite <[email protected]>
I fixed all trivial stuff but the stop-on-no-en and reposted the v9 patchseries.
There are some reasons to not fix stop-on-no-en just now:
1. there is no good documentation on DIGIC. So if I want to realize stop-on-no-en timer feature then I have to check it in hardware. But just now my only DIGIC4-based camera with UART is mothballed.
2. this patchseries is intended only for initial DIGIC support; the only software for this initial support is barebox bootloader that run correctly on real hardware. After adding initial DIGIC support I'm planning to make advanched DIGIC support for Magic Lantern and CHDK. So I can carry over realization of more accurate timer model.
Quoted 40 lines
Quoted 40 lines
hw/timer/digic-timer.h new file +9
-0+ +MemoryRegion iomem; +ptimer_state *ptimer; + +uint32_t control; + uint32_t relvalue; +} DigicTimerState; + +#endif /* HW_TIMER_DIGIC_TIMER_H */ include/hw/arm/digic.h +6
-1@@ -20,16 +20,22 @@#include "cpu.h" +#include "hw/timer/digic-timer.h" +#define TYPE_DIGIC "digic"#define DIGIC (obj) OBJECT_CHECK(DigicState, (obj), TYPE_DIGIC) +#define DIGIC4_NB_TIMERS 3 +typedef struct DigicState {/*< private >*/ DeviceState parent_obj;/*< public >*/ ARMCPU cpu; + +DigicTimerState timer[DIGIC4_NB_TIMERS ]; }DigicState ;#endif /* HW_ARM_DIGIC_H */ --1.8.5
Signature · 3 lines
-- Best regards, Antony Pavlov
PATCH v8 4/6 hw/arm/digic: add UART support
In reply to Antony Pavlov--- hw/arm/digic.c | 16 ++++ hw/char/Makefile.objs | 1 + hw/char/digic-uart.c | 195 +++++++++++++++++++++++++++++++++++++++++++++++++ hw/char/digic-uart.h | 45 ++++++++++++ include/hw/arm/digic.h | 2 + 5 files changed, 259 insertions(+) create mode 100644 hw/char/digic-uart.c create mode 100644 hw/char/digic-uart.h
hw/arm/digic.c +16 -0
@@ -24,6 +24,8 @@#define DIGIC4_TIMER_BASE (n) (0xc0210000 + (n) * 0x100) +#define DIGIC_UART_BASE 0xc0800000 +static void digic_init (Object *obj) {DigicState *s =DIGIC (obj);
@@ -43,6 +45,11 @@ static void digic_init(Object *obj)snprintf (name,DIGIC_TIMER_NAME_MLEN ,"timer[%d]" , i);object_property_add_child (obj, name,OBJECT (&s->timer[i]),NULL ); } + +object_initialize (&s->uart,sizeof (s->uart),TYPE_DIGIC_UART ); + dev =DEVICE (&s->uart); +qdev_set_parent_bus (dev,sysbus_get_default ()); +object_property_add_child (obj,"uart" ,OBJECT (&s->uart),NULL ); }static void digic_realize (DeviceState *dev,Error **errp)
@@ -74,6 +81,15 @@ static void digic_realize(DeviceState *dev, Error **errp) sbd =SYS_BUS_DEVICE (&s->timer[i]);sysbus_mmio_map (sbd,0 ,DIGIC4_TIMER_BASE (i)); } + +object_property_set_bool (OBJECT (&s->uart), true,"realized" , &err); +if (err !=NULL ) { +error_propagate (errp, err); +return ; + } + + sbd =SYS_BUS_DEVICE (&s->uart); +sysbus_mmio_map (sbd,0 ,DIGIC_UART_BASE ); }static void digic_class_init (ObjectClass *oc,void *data)
hw/char/Makefile.objs +1 -0
@@ -14,6 +14,7 @@ obj-$(CONFIG_COLDFIRE) += mcf_uart.o obj-$(CONFIG_OMAP) += omap_uart.o obj-$(CONFIG_SH4) += sh_serial.o obj-$(CONFIG_PSERIES) += spapr_vty.o +obj-$(CONFIG_DIGIC) += digic-uart.o common-obj-$(CONFIG_ETRAXFS) += etraxfs_ser.o common-obj-$(CONFIG_ISA_DEBUG) += debugcon.o
hw/char/digic-uart.c new file +195 -0
195 lines not on this page · raw message
hw/char/digic-uart.h new file +45 -0
45 lines not on this page · raw message
include/hw/arm/digic.h +2 -0
@@ -21,6 +21,7 @@#include "cpu.h" #include "hw/timer/digic-timer.h" +#include "hw/char/digic-uart.h" #define TYPE_DIGIC "digic"
@@ -36,6 +37,7 @@ typedef struct DigicState {ARMCPU cpu;DigicTimerState timer[DIGIC4_NB_TIMERS ]; + DigicUartState uart; } DigicState;#endif /* HW_ARM_DIGIC_H */
Signature · 1 line
1.8.5
PATCH v8 5/6 hw/arm/digic: add NOR ROM support
In reply to Antony Pavlov--- hw/arm/digic_boards.c | 70 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 70 insertions(+)
hw/arm/digic_boards.c +70 -0
@@ -27,6 +27,13 @@#include "exec/address-spaces.h" #include "qemu/error-report.h" #include "hw/arm/digic.h" +#include "hw/block/flash.h" +#include "hw/loader.h" +#include "sysemu/sysemu.h" + +#define DIGIC4_ROM0_BASE 0xf0000000 +#define DIGIC4_ROM1_BASE 0xf8000000 +#define DIGIC4_ROM_MAX_SIZE 0x08000000 typedef struct DigicBoardState { DigicState *digic;
@@ -35,6 +42,10 @@ typedef struct DigicBoardState {typedef struct DigicBoard {hwaddr ram_size; +void (*add_rom0)(DigicBoardState *,hwaddr ,const char *); +const char *rom0_def_filename; +void (*add_rom1)(DigicBoardState *,hwaddr ,const char *); +const char *rom1_def_filename; }DigicBoard ;static void digic4_board_setup_ram (DigicBoardState *s,hwaddr ram_size)
@@ -59,10 +70,69 @@ static void digic4_board_init(DigicBoard *board) }digic4_board_setup_ram (s, board->ram_size); + +if (board->add_rom0) { + board->add_rom0 (s,DIGIC4_ROM0_BASE , board->rom0_def_filename); + } + +if (board->add_rom1) { + board->add_rom1 (s,DIGIC4_ROM1_BASE , board->rom1_def_filename); + } +} + +static void digic_load_rom (DigicBoardState *s,hwaddr addr, +hwaddr max_size,const char *def_filename) +{ +target_long rom_size; +const char *filename; + +if (bios_name) { + filename = bios_name; + }else { + filename = def_filename; + } + +if (filename) { +char *fn =qemu_find_file (QEMU_FILE_TYPE_BIOS , filename); + +if (!fn) { +error_report ("Couldn't find rom image '%s'.\n" , filename); +exit (1 ); + } + + rom_size =load_image_targphys (fn, addr, max_size); +if (rom_size <0 || rom_size > max_size) { +error_report ("Couldn't load rom image '%s'.\n" , filename); +exit (1 ); + } + } +} + +/* +* Samsung K8P3215UQB +* 64M Bit (4Mx16) Page Mode / Multi-Bank NOR Flash Memory +*/ +static void digic4_add_k8p3215uqb_rom (DigicBoardState *s,hwaddr addr, +const char *def_filename) +{ +#define FLASH_K8P3215UQB_SIZE (4 * 1024 * 1024) +#define FLASH_K8P3215UQB_SECTOR_SIZE (64 * 1024) + +pflash_cfi02_register (addr,NULL ,"pflash" ,FLASH_K8P3215UQB_SIZE , +NULL ,FLASH_K8P3215UQB_SECTOR_SIZE , +FLASH_K8P3215UQB_SIZE /FLASH_K8P3215UQB_SECTOR_SIZE , +DIGIC4_ROM_MAX_SIZE /FLASH_K8P3215UQB_SIZE , +4 , +0x00EC ,0x007E ,0x0003 ,0x0001 , +0x0555 ,0x2aa ,0 ); + +digic_load_rom (s, addr,FLASH_K8P3215UQB_SIZE , def_filename); }static DigicBoard digic4_board_canon_a1100 = { .ram_size =64 *1024 *1024 , + .add_rom1 = digic4_add_k8p3215uqb_rom, + .rom1_def_filename ="canon-a1100-rom1.bin" , };static void canon_a1100_init (QEMUMachineInitArgs *args)
Signature · 1 line
1.8.5
PATCH v8 6/6 MAINTAINERS: Document 'Canon DIGIC' machine
In reply to Antony Pavlov--- MAINTAINERS | 6 ++++++ 1 file changed, 6 insertions(+)
MAINTAINERS +6 -0
@@ -233,6 +233,12 @@ S: Supported F: hw/arm/highbank.c F: hw/net/xgmac.c +Canon DIGIC +M: Antony Pavlov <[email protected]> +S: Maintained +F: include/hw/arm/digic.h +F: hw/*/digic* + Gumstix M: [email protected] S: Orphan
Signature · 1 line
1.8.5