Skip to contentSkip to conversation

ARM: shmobile: r8a7790: add the I2C bus clock

PATCH In review Ulrich Hecht 3 participants 4 messages Sep 10, 2013 – Jan 9, 2014

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 3/3 ARM: shmobile: r8a7790: add the I2C bus clock

From: Nguyen Viet Dung <[email protected]>

This patch adds the I2C bus clock.

---
 arch/arm/mach-shmobile/clock-r8a7790.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
arch/arm/mach-shmobile/clock-r8a7790.c +11 -0
index d99b87b..654d922 100644
@@ -52,6 +52,7 @@
 #define SMSTPCR5 0xe6150144
 #define SMSTPCR7 0xe615014c
 #define SMSTPCR8 0xe6150990
+#define SMSTPCR9 0xe6150994
 
 #define SDCKCR		0xE6150074
 #define SD2CKCR		0xE6150078
@@ -181,6 +182,7 @@ static struct clk div6_clks[DIV6_NR] = {
 
 /* MSTP */
 enum {
+	MSTP931, MSTP930, MSTP929, MSTP928,
 	MSTP813,
 	MSTP726, MSTP725, MSTP724, MSTP723, MSTP722, MSTP721, MSTP720,
 	MSTP717, MSTP716,
@@ -192,6 +194,10 @@ enum {
 };
 
 static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP931] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 31, 0), /* I2C0 */
+	[MSTP930] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 30, 0), /* I2C1 */
+	[MSTP929] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 29, 0), /* I2C2 */
+	[MSTP928] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 28, 0), /* I2C3 */
 	[MSTP813] = SH_CLK_MSTP32(&p_clk, SMSTPCR8, 13, 0), /* Ether */
 	[MSTP726] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 26, 0), /* LVDS0 */
 	[MSTP725] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 25, 0), /* LVDS1 */
@@ -247,6 +253,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("mp",		&mp_clk),
 	CLKDEV_CON_ID("qspi",		&qspi_clk),
 	CLKDEV_CON_ID("cp",		&cp_clk),
+	CLKDEV_CON_ID("peripheral_clk",	&hp_clk),
 
 	/* DIV4 */
 	CLKDEV_CON_ID("sdh",		&div4_clks[DIV4_SDH]),
@@ -286,6 +293,10 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("ee220000.mmcif", &mstp_clks[MSTP305]),
 	CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]),
 	CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
+	CLKDEV_DEV_ID("i2c-rcar_h2.0", &mstp_clks[MSTP931]),
+	CLKDEV_DEV_ID("i2c-rcar_h2.1", &mstp_clks[MSTP930]),
+	CLKDEV_DEV_ID("i2c-rcar_h2.2", &mstp_clks[MSTP929]),
+	CLKDEV_DEV_ID("i2c-rcar_h2.3", &mstp_clks[MSTP928]),
 };
 
 #define R8A7790_CLOCK_ROOT(e, m, p0, p1, p30, p31)		\
Signature · 1 line
1.8.1.4
#1 lore raw

PATCH 3/3 ARM: shmobile: r8a7790: Add SATA clocks

This adds SATA[01] clock support to R8A7790 SoC.

---
 arch/arm/mach-shmobile/clock-r8a7790.c | 5 +++++
 1 file changed, 5 insertions(+)
arch/arm/mach-shmobile/clock-r8a7790.c +5 -0
index d1b1b8f..b22f89d 100644
@@ -196,6 +196,7 @@ enum {
 	MSTP1009, MSTP1008, MSTP1007, MSTP1006, MSTP1005,
 	MSTP931, MSTP930, MSTP929, MSTP928,
 	MSTP917,
+	MSTP815, MSTP814,
 	MSTP813,
 	MSTP811, MSTP810, MSTP809, MSTP808,
 	MSTP726, MSTP725, MSTP724, MSTP723, MSTP722, MSTP721, MSTP720,
@@ -225,6 +226,8 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP929] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */
 	[MSTP928] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */
 	[MSTP917] = SH_CLK_MSTP32_STS(&qspi_clk, SMSTPCR9, 17, MSTPSR9, 0), /* QSPI */
+	[MSTP815] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 15, MSTPSR8, 0), /* SATA0 */
+	[MSTP814] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 14, MSTPSR8, 0), /* SATA1 */
 	[MSTP813] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR8, 13, MSTPSR8, 0), /* Ether */
 	[MSTP811] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 11, MSTPSR8, 0), /* VIN0 */
 	[MSTP810] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 10, MSTPSR8, 0), /* VIN1 */
@@ -339,6 +342,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("pci-rcar-gen2.0", &mstp_clks[MSTP703]),
 	CLKDEV_DEV_ID("pci-rcar-gen2.1", &mstp_clks[MSTP703]),
 	CLKDEV_DEV_ID("pci-rcar-gen2.2", &mstp_clks[MSTP703]),
+	CLKDEV_DEV_ID("sata-r8a7790.0", &mstp_clks[MSTP815]),
+	CLKDEV_DEV_ID("sata-r8a7790.1", &mstp_clks[MSTP814]),
 
 	/* ICK */
 	CLKDEV_ICK_ID("usbhs", "usb_phy_rcar_gen2", &mstp_clks[MSTP704]),
Signature · 1 line
1.8.3.1
#2 lore raw

Re: [PATCH 3/3] ARM: shmobile: r8a7790: Add SATA clocks

In reply to Ulrich Hecht
Quoted 6 lines · Valentine Barshak

This adds SATA[01] clock support to R8A7790 SoC.

---
 arch/arm/mach-shmobile/clock-r8a7790.c | 5 +++++
 1 file changed, 5 insertions(+)

Thanks, I have queued this up.

As I did so without 2/3 of this series applied there were some minor conflicts. Please check that the following is correct.

From: Valentine Barshak <[email protected]>

ARM: shmobile: r8a7790: Add SATA clocks

This adds SATA[01] clock support to R8A7790 SoC.

arch/arm/mach-shmobile/clock-r8a7790.c +5 -0
index b2b2323..f25b43a 100644
@@ -196,6 +196,7 @@ enum {
 	MSTP1009, MSTP1008, MSTP1007, MSTP1006, MSTP1005,
 	MSTP931, MSTP930, MSTP929, MSTP928,
 	MSTP917,
+	MSTP815, MSTP814,
 	MSTP813,
 	MSTP811, MSTP810, MSTP809, MSTP808,
 	MSTP726, MSTP725, MSTP724, MSTP723, MSTP722, MSTP721, MSTP720,
@@ -226,6 +227,8 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP929] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */
 	[MSTP928] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */
 	[MSTP917] = SH_CLK_MSTP32_STS(&qspi_clk, SMSTPCR9, 17, MSTPSR9, 0), /* QSPI */
+	[MSTP815] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 15, MSTPSR8, 0), /* SATA0 */
+	[MSTP814] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 14, MSTPSR8, 0), /* SATA1 */
 	[MSTP813] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR8, 13, MSTPSR8, 0), /* Ether */
 	[MSTP811] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 11, MSTPSR8, 0), /* VIN0 */
 	[MSTP810] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 10, MSTPSR8, 0), /* VIN1 */
@@ -340,6 +343,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
 	CLKDEV_DEV_ID("qspi.0", &mstp_clks[MSTP917]),
 	CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP704]),
+	CLKDEV_DEV_ID("sata-r8a7790.0", &mstp_clks[MSTP815]),
+	CLKDEV_DEV_ID("sata-r8a7790.1", &mstp_clks[MSTP814]),
 
 	/* ICK */
 	CLKDEV_ICK_ID("usbhs", "usb_phy_rcar_gen2", &mstp_clks[MSTP704]),
#3 lore raw

Re: [PATCH 3/3] ARM: shmobile: r8a7790: Add SATA clocks

In reply to Ulrich Hecht
Quoted 8 lines · Simon Horman
Quoted 6 lines · Valentine Barshak

This adds SATA[01] clock support to R8A7790 SoC.

---
  arch/arm/mach-shmobile/clock-r8a7790.c | 5 +++++
  1 file changed, 5 insertions(+)
Quoted 4 lines

Thanks, I have queued this up.

As I did so without 2/3 of this series applied there were some minor conflicts. Please check that the following is correct.

It is correct.

Thanks,
Val.

Quoted 42 lines

From: Valentine Barshak <[email protected]>

ARM: shmobile: r8a7790: Add SATA clocks

This adds SATA[01] clock support to R8A7790 SoC.

arch/arm/mach-shmobile/clock-r8a7790.c +5 -0
index b2b2323..f25b43a 100644
@@ -196,6 +196,7 @@ enum {
  	MSTP1009, MSTP1008, MSTP1007, MSTP1006, MSTP1005,
  	MSTP931, MSTP930, MSTP929, MSTP928,
  	MSTP917,
+	MSTP815, MSTP814,
  	MSTP813,
  	MSTP811, MSTP810, MSTP809, MSTP808,
  	MSTP726, MSTP725, MSTP724, MSTP723, MSTP722, MSTP721, MSTP720,
@@ -226,6 +227,8 @@ static struct clk mstp_clks[MSTP_NR] = {
  	[MSTP929] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */
  	[MSTP928] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */
  	[MSTP917] = SH_CLK_MSTP32_STS(&qspi_clk, SMSTPCR9, 17, MSTPSR9, 0), /* QSPI */
+	[MSTP815] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 15, MSTPSR8, 0), /* SATA0 */
+	[MSTP814] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 14, MSTPSR8, 0), /* SATA1 */
  	[MSTP813] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR8, 13, MSTPSR8, 0), /* Ether */
  	[MSTP811] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 11, MSTPSR8, 0), /* VIN0 */
  	[MSTP810] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 10, MSTPSR8, 0), /* VIN1 */
@@ -340,6 +343,8 @@ static struct clk_lookup lookups[] = {
  	CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
  	CLKDEV_DEV_ID("qspi.0", &mstp_clks[MSTP917]),
  	CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP704]),
+	CLKDEV_DEV_ID("sata-r8a7790.0", &mstp_clks[MSTP815]),
+	CLKDEV_DEV_ID("sata-r8a7790.1", &mstp_clks[MSTP814]),
 
  	/* ICK */
  	CLKDEV_ICK_ID("usbhs", "usb_phy_rcar_gen2", &mstp_clks[MSTP704]),